Search Results

Search found 17847 results on 714 pages for 'virtual disk'.

Page 296/714 | < Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >

• Boot problems w/ External HDD

  - by JeremyT

  I'm having a problem with booting a live image off of a USB Hard Drive. I used Startup Disk Creator to make an Ubuntu 11.10 live image on a partition on my external so that I can use it on various computers. I set it up with ~4GB of persistent data So far I've tried it on two computers. One, a Dell, will boot to my external but it loads the select boot device very slowly. It hangs on a screen with an underscore for up to 5 minutes until it allows me to select which drive I want to boot from. After that, it works great. However, on my primary computer it doesn't work at all. It's an Acer from 2009 and it won't even recognize the drive. I don't see it anywhere in BIOS or the select boot disk list. The light on the external will come on at boot just fine so I know it's powering it at this time. Both computers worked perfectly with my 4GB flash drive that I had partitioned half and half (1st half FAT32 and second Ubuntu 11.10 live)

  Read the article

• Blank screen after GRUB (64 bit) - cannot install Ubuntu

  - by peGGi

  My laptop's specs: Lenovo IdeaPad Z570 Intel Core i5-2410M @ 2.3Ghz 6 Gb RAM DDR3 640 Gb ATAPI Hard-disk Drive @ 5,200 RPM NVIDIA GeForce G520M with Optimus switching technology Broadcom 802.11n Network Adapter REALTEK soundcard Windows 7 Home Premium 64-bit I downloaded Ubuntu Studio 11.04 and burned the iso image onto two different DVDs, using two different programs (one DVD is RW, the other is just R). I verified the hash MD5sum thing. I get as far as GRUB with the 4 options (install, advanced install, disk verification, system rescue) but no matter which one I select, I get a blank screen and nothing happens. The DVD drive spins down after about 30 seconds. Also just before the GRUB screen I get a message saying Error: "Prefix" is not set. I'm not sure if that's relevant. I have tried all the options using both DVDs. Same thing happens. I have changed the graphics setting in BIOS to UMA or Optimus, but still happens either way. I've tried booting with the wireless switch turned off, same thing happens. I downloaded 'vanilla' Ubuntu 64-bit and burned onto a CD, and the same thing happens. I have downloaded Ubuntu 32-bit and I am able to boot from the live CD (interestingly the wireless card won't work, but that's maybe another issue). I have searched extensively through these forums and other sites but I can't see anything that will help me. Is there something I'm missing? I'd really appreciate help on this. The laptop is less than 2 weeks old. I was so looking forward to getting Ubuntu Studio up and running. I've gone about as far as my technical abilities will allow.

  Read the article

• the OpenJDK group at Oracle is growing

  - by john.rose

  p.p1 {margin: 0.0px 0.0px 12.0px 0.0px; font: 12.0px Times} span.s1 {text-decoration: underline ; color: #0000ee} The OpenJDK software development team at Oracle is hiring. To get an idea of what we’re looking for, go to the Oracle recruitment portal and enter the Keywords “Java Platform Group” and the Location Keywords “Santa Clara”.  (We are a global engineering group based in Santa Clara.)  It’s pretty obvious what we are working on; just dive into a public OpenJDK repository or OpenJDK mailing list. Here is a typical job description from the current crop of requisitions: The Java Platform group is looking for an experienced, passionate and highly-motivated Software Engineer to join our world class development effort. Our team is responsible for delivering the Java Virtual Machine that is used by millions of developers. We are looking for a development engineer with a strong technical background and thorough understanding of the Java Virtual Machine, Java execution runtime, classloading, garbage collection, JIT compiler, serviceability and a desire to drive innovations. As a member of the software engineering division, you will take an active role in the definition and evolution of standard practices and procedures. You will be responsible for defining and developing software for tasks associated with the developing, designing and debugging of software applications or operating systems. Work is non-routine and very complex, involving the application of advanced technical/business skills in area of specialization. Leading contributor individually and as a team member, providing direction and mentoring to others. BS or MS degree or equivalent experience relevant to functional area. 7 years of software engineering or related experience.

  Read the article

• Go/Obj-C style interfaces with ability to extend compiled objects after initial release

  - by Skrylar

  I have a conceptual model for an object system which involves combining Go/Obj-C interfaces/protocols with being able to add virtual methods from any unit, not just the one which defines a class. The idea of this is to allow Ruby-ish open classes so you can take a minimalist approach to library development, and attach on small pieces of functionality as is actually needed by the whole program. Implementation of this involves a table of methods marked virtual in an RTTI table, which system functions are allowed to add to during module initialization. Upon typecasting an object to an interface, a Go-style lookup is done to create a vtable for that particular mapping and pass it off so you can have comparable performance to C/C++. In this case, methods may be added /afterwards/ which were not previously known and these new methods allow newer interfaces to be satisfied; while I like this idea because it seems like it would be very flexible (disregarding the potential for spaghetti code, which can happen with just about any model you use regardless). By wrapping the system calls for binding methods up in a set of clean C-compatible calls, one would also be able to integrate code with shared libraries and retain a decent amount of performance (Go does not do shared linking, and Objective-C does a dynamic lookup on each call.) Is there a valid use-case for this model that would make it worth the extra background plumbing? As much as this Dylan-style extensibility would be nice to have access to, I can't quite bring myself to a use case that would justify the overhead other than "it could make some kinds of code more extensible in future scenarios."

  Read the article

• ZFS Basics

  - by user12614620

  Stage 1 basics: creating a pool # zpool create $NAME $REDUNDANCY $DISK1_0..N [$REDUNDANCY $DISK2_0..N]... $NAME = name of the pool you're creating. This will also be the name of the first filesystem and, by default, be placed at the mountpoint "/$NAME" $REDUNDANCY = either mirror or raidzN, and N can be 1, 2, or 3. If you leave N off, then it defaults to 1. $DISK1_0..N = the disks assigned to the pool. Example 1: zpool create tank mirror c4t1d0 c4t2d0 name of pool: tank redundancy: mirroring disks being mirrored: c4t1d0 and c4t2d0 Capacity: size of a single disk Example 2: zpool create tank raidz c4t1d0 c4t2d0 c4t3d0 c4t4d0 c4t5d0 Here the redundancy is raidz, and there are five disks, in a 4+1 (4 data, 1 parity) config. This means that the capacity is 4 times the disk size. If the command used "raidz2" instead, then the config would be 3+2. Likewise, "raidz3" would be a 2+3 config. Example 3: zpool create tank mirror c4t1d0 c4t2d0 mirror c4t3d0 c4t4d0 This is the same as the first mirror example, except there are two mirrors now. ZFS will stripe data across both mirrors, which means that writing data will go a bit faster. Note: you cannot create a mirror of two raidzs. You can create a raidz of mirrors, but to do that requires trickery.

  Read the article

• Oracle VM 3.1.1 build 365 released

  - by wcoekaer

  A few days ago we released a patch update for Oracle VM 3.1.1 (build 365). Oracle VM Manager 3.1.1 Build 365 is now available from My Oracle Support patch ID 14227416 Oracle VM Server 3.1.1 errata updates are, as usual, released on ULN in the ovm3_3.1.1_x86_64_patch channel. Just a reminder, when we publish errata for Oracle VM, the notifications are sent through the oraclevm-errata maillist. You can sign up here. Some of the bugfixes in 3.1.1 : 14054162 - Removes unnecessary locks when creating VNICs in a multi-threaded operation. 14111234 - Fixes the issue when discovering a virtual machine that has disks in a un-discovered repository or has un-discovered physical disks. 14054133 - Fixes a bug of object not found where vdisks are left stale in certain multi-thread operations. 14176607 - Fixes the issue where Oracle VM Manager would hang after a restart due to various tasks running jobs in the global context. 14136410 - Fixes the stale lock issue on multithreaded server where object not found error happens in some rare situations. 14186058 - Fixes the issue where Oracle VM Manager fails to discover the server or start the server after the server hardware configuration (i.e. BIOS) was modified. 14198734 - Fixes the issue where HTTP cannot be disabled. 14065401 - Fixes Oracle VM Manager UI time-out issue where the default value was not long enough for storage repository creation. 14163755 - Fixes the issue when migrating a virtual machine the list of target servers (and "other servers") was not ordered by name. 14163762 - Fixes the size of the "Edit Vlan Group" window to display all information correctly. 14197783 - Fixes the issue that navigation tree (servers) was not ordered by name. I strongly suggest everyone to use this latest build and also update the server to the latest version. have at it.

  Read the article

• What does the crash mean? And why is my Ubuntu Blackbox is crashing how can i check deeply?

  - by YumYumYum

  My system was running for a while amount of 6 hour. Two times i loss remote access and it was not functioning anymore IP is gone etc etc. 3 time showing crash but i have no idea what and why. How to know what went wrong? $ last sun pts/0 d51a429c9.access Mon Mar 19 13:44 still logged in sun tty7 :0 Mon Mar 19 12:17 still logged in reboot system boot 2.6.38-8-generic Mon Mar 19 12:17 - 13:49 (01:31) sun pts/0 d51a429c9.access Mon Mar 19 10:05 - crash (02:12) sun tty7 :0 Mon Mar 19 10:00 - crash (02:16) reboot system boot 2.6.38-8-generic Mon Mar 19 10:00 - 13:49 (03:48) sun pts/0 d51a429c9.access Mon Mar 19 09:24 - down (00:35) sun tty7 :0 Mon Mar 19 09:20 - down (00:39) reboot system boot 2.6.38-8-generic Mon Mar 19 09:20 - 10:00 (00:39) sun pts/2 d51a429c9.access Sun Mar 18 18:04 - down (01:14) sun pts/1 d51a429c9.access Sun Mar 18 17:43 - down (01:35) sun pts/0 d51a429c9.access Sun Mar 18 15:07 - 18:47 (03:40) sun pts/1 d51a429c9.access Sun Mar 18 12:58 - 17:42 (04:43) sun pts/0 d51a429c9.access Sun Mar 18 10:21 - 15:06 (04:44) sun tty7 :0 Sun Mar 18 08:56 - down (10:22) reboot system boot 2.6.38-8-generic Sun Mar 18 08:56 - 19:19 (10:22) sun tty7 :0 Sat Mar 17 18:03 - down (14:51) reboot system boot 2.6.38-8-generic Sat Mar 17 18:03 - 08:55 (14:51) sun tty7 :0 Sat Mar 17 15:00 - down (01:38) reboot system boot 2.6.38-8-generic Sat Mar 17 15:00 - 16:39 (01:38) sun pts/0 d51a4297d.access Sat Mar 17 10:45 - 14:32 (03:46) sun tty7 :0 Fri Mar 16 18:46 - crash (20:14) reboot system boot 2.6.38-8-generic Fri Mar 16 18:46 - 16:39 (21:53) $ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +27.8°C (crit = +100.0°C) temp2: +29.8°C (crit = +100.0°C)

  Read the article

• Setting up Cluster Configuration using an existing web server as a Primary Node?

  - by RapidWebs

  Thanks in advance for any help which is issued! I am having a slight issue, and need help with the decision making process when it comes to setting up my Cluster Configuration, consisting on a line of Ubuntu Servers (12.04). We currently have a Primary node, which resides in the US within a Datacenter, but we are going to be using this for all serious bandwidth and resource intensive websites, and through a configuration of Virtualmin + Webmin, will be setup as a sort of pseudo-cluster, using Virtualmins Cluster Modules. Anyways, on to the issue: We also have a business line setup locally, with three servers. here are their specs: Intel P4 2.4 ghz, 1GB Ram, 110 gb sata, Ubuntu 12.04* AMD 1.3 ghz, 512MB Ram, 20 GB IDE P3 Xeon 800mhz (dual physical processors), 1GB Ram, 3 * 25 GB Raid Configuration (one in use for host operating system). The first machine is currently IN USE and is serving virtual hosts off a sub-domain. My question is this: How can I integrate the Secondary node (which will be the Primary node per say, in this smaller configuration...) which is currently in use, into the cluster configuration w/ the other two servers for: Sharing Resources Redundancy (HA?) NFS /w the two Raid Disks without having the FORMAT the secondary node, and start fresh moving all my services in to a DRBD network drive or something similar, and than restoring all active virtualmin's Virtual hosts. the idea is that I want minimal downtime to people currently being served from server2.mywebsite.com, and from what I understand, all services need to be on a NFS so that they can be mounted on demand and accessed from the other machine taking over (i.e. Heartbeat + DRBD Config.) but my issue is that i already have all these services installed to their default directory structure: how can i most easily setup this NFS and HA system, move all my desires services to this new drive, and do it with minimal down time, and without breaking Virtualmin and everything else on my server? even just some pointers, a thread i could read, or a step by step check list or run down of commands i could issue to get started would be great! thanks!

  Read the article

• Managing arbitrary user permissions under PureFTPd

  - by Sebastián Grignoli

  I need to provide an FTP service that needs to be web-managed in the simplest way possible. My customer wants to create folders and users, and give them read only or read/write access arbitrarily. For example: The folder 'Documents' should be read only for several users, writable for internal users, and invisible for the rest. The folder 'Pictures' should be read only for journalists, writable for associates, and invisible for the rest. The folder 'Media' should be read only, writable or invisible for arbitrary users specified on the admin. There could be a large number of users and folders. I can't find a good way to accomplish that. I thought that I could give each user a home folder and put symlinks for the folders he has read access to, and make the user part of the folder's group when he has write access too, but now I think that this wouldn't work, because with PureFTPd (or ProFTPd) I can only specify the virtual user's mapping to a system user, and only one GUID for each virtual user. My approach requires that I could specify several GUIDs for each user (one by each folder he has write access to). I need to start programming this admin and I still don't know wich approach would work, if any. ¿Any ideas?

  Read the article

• Restoring GRUB2 on Software RAID 0 using LiveCD after Windows 7 wiped it

  - by unknownthreat

  I have installed Ubuntu 10.10 on my system. However, I need to install Windows 7 back, and I expect that it would alter GRUB and it did. Right now, my partition on my Software RAID 0 looks like this: nvidia_acajefec1 is Ubuntu 10.10 and nvidia_acajefec3 is Windows 7. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. I've tried running: sudo grub > root (hd0,0) GRUB complains it couldn't find my hard disk. So I tried: find (hd0,0) And it complains that it couldn't find anything. So I tried: find /boot/grub/stage1 It said "file not found". Here's the text from the console: ubuntu@ubuntu:~$ grub Probing devices to guess BIOS drives. This may take a long time. [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub> root (hd0,0) root (hd0,0) Error 21: Selected disk does not exist grub> find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found Fortunately, I got one person suggesting that what I've been trying to do is for GRUB Legacy, not GRUB2. So I went to the suggested website, ** (http://grub.enbug.org/Grub2LiveCdInstallGuide) **try to look around, and try: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sda This is just the step 2 of the instruction in the http://grub.enbug.org/Grub2LiveCdInstallGuide and I cannot proceed because it cannot seek /dev/sda. However, ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So what now? Do you have an idea for how to make fdisk see my RAID array on live cd (Ubuntu 10.10)? Honestly, I am lost, very lost in trying to restore GRUB2 on this software RAID 0 system right now.

  Read the article

• USB device is recognized but has no address

  - by SeanMG

  Good day folks, I'm trying to use a USRP1 with GNURadio if anyone knows what any of that is. I am running Ubuntu on a Windows 7 machine via VMware player. When I connect this USRP1 via USB 2.0 drive to Windows 7 it is recognized as Ettus Research LLC USRP1... When I connect the device to Ubuntu through VMware, it shows: usb device fffe:0002 on my removable devices. When I run lsusb I receive the following: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 001 Device 004: ID fffe:0002 When I run this program that comes with the USRP driver... uhd_find_devices I receive: -------------------------------------------------- -- UHD Device 0 -------------------------------------------------- Device Address: type: usrp1 name: serial: 00000000 So when I run this program, it does recognize the fact that this device is connected. However, the device has no address, no name, and has a null serial. I need to know the device address so I can run more programs in GNURadio. Does anyone know what the problem is here? Thanks!

  Read the article

• The NEW MySQL for Developers Course

  - by Antoinette O'Sullivan

  Just Released - The new MySQL for Developers training course.  This 5 day course covers everything a developer needs to know when planning, designing and implementing applications using MySQL, with realistic examples using languages such as Java and PHP. This course gives an in-depth coverage of statements that access and modify data, and shows the student how to design and create other MySQL objects such as triggers, views, and stored procedures. You can take this course: From your desk as a live virtual offering. There are over 800 events on the schedule so you should find one in a timezone near you. The virtual events are also delivered in many languages including English, German, Korean, Latin American Spanish, ... In a classroom. Here is a sample of events on the schedule:  Location  Date  Delivery Language  Prague, Czech Republic 8 October 2012 Czech  Warsaw, Poland 5 November 2012 Polish  Wien, Austria  12 November 2012 German  London, England 15 October 2012 English  Bern, Switzerland  11 April 2013 German  Zurich, Switzerland 14 November 2012 German  Milan, Italy 19 November 2012  Italian  Rome, Italy  15 October 2012  Italian  Gummersbach, Germany  11 February 2013 German  Hamburg, Germany  12 November 2012  German Munich, Germany  10 June 2013  German  Lisbon, Portugal 26 November 2012 European Portuguese  Porto, Portugal 18 February 2013 European Portuguese  Nairobi, Kenya  19 November 2012  English  Madrid, Spain  10 December 2012  Spanish Petaling Jaya, Malaysia  15 October 2012  English  Bangkok, Thailand  29 October 2012  English For further information on the Authentic MySQL Curriculum, to register for an event or express interest in an additional event, go to http://oracle.com/education/mysql.

  Read the article

• Confused about implementing Single Responsibility Principle

  - by HichemSeeSharp

  Please bear with me if the question looks not well structured. To put you in the context of my issue: I am building an application that invoices vehicles stay duration in a parking. In addition to the stay service there are some other services. Each service has its own calculation logic. Here is an illustration (please correct me if the design is wrong): public abstract class Service { public int Id { get; set; } public bool IsActivated { get; set; } public string Name { get; set } public decimal Price { get; set; } } public class VehicleService : Service { //MTM : many to many public virtual ICollection<MTMVehicleService> Vehicles { get; set; } } public class StayService : VehicleService { } public class Vehicle { public int Id { get; set; } public string ChassisNumber { get; set; } public DateTime? EntryDate { get; set; } public DateTime? DeliveryDate { get; set; } //... public virtual ICollection<MTMVehicleService> Services{ get; set; } } Now, I am focusing on the stay service as an example: I would like to know at invoicing time which class(es) would be responsible for generating the invoice item for the service and for each vehicle? This should calculate the duration cost knowing that the duration could be invoiced partially so the like is as follows: not yet invoiced stay days * stay price per day. At this moment I have InvoiceItemsGenerator do everything but I am aware that there is a better design.

  Read the article

• Problem with APTonCD application

  - by Harikrishnan

  I created a iso image using aptoncd & burned it to a dvd. Now when i tried to restore, the program does not detect the dvd in the drive. It shows "Please insert a disc in the drive." and if we click "ok" it shows E: Failed to mount the cdrom. The dvd is in the drive itself. I tried sudo lshw -C disk and the output is: *-cdrom description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 logical name: /media/APTonCD logical name: /media/apt version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted status=ready *-medium physical id: 0 logical name: /dev/cdrom logical name: /media/APTonCD logical name: /media/apt configuration: mount.fstype=iso9660 mount.options=ro,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted Then i checked in disk utility application. in that dvd rom is shown as /dvd/sr0 My ubuntu version is 10.10. Please help me to solve the problem.

  Read the article

• Grub does not show a Windows 8 option after dual boot

  - by skytreader

  So, I've successfully dual-booted my Windows 8 machine with Ubuntu 12.04 . However, I still don't have a convenient method of choosing what OS to load at boot time. After installing Ubuntu, my computer still loads Windows 8 directly. I then added grubx64.efi to the white list of my boot loader. But after that, my machine loads Ubuntu directly without even a shadow of GRUB showing up! I used boot-repair and I got this paste.ubuntu URL: paste.ubuntu.com/1326074. After running boot-repair (and re-white listing the grubx64.efi file), GRUB now shows up but without any Windows 8 option! Lastly, I ran sudo fdisk -l and it gave me this: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x6396389f Device Boot Start End Blocks Id System /dev/sda1 1 1465149167 732574583+ ee GPT Partition 1 does not start on physical sector boundary. I'm guessing my problem has something to do with the warning from fdisk above but I don't know what to do with it. How do I proceed now?

  Read the article

• Creating a bootable flash without overlayfs

  - by Septagram

  I want to create an USB stick to carry my Ubuntu everywhere around with me. It's not intended to spread Ubuntu by installing it everywhere, but rather for running my configured system on any computer I come across. So far, I went with installing Ubuntu with unetbootin, however, I have some issues with this. When installed with netbootin, the original disk image is kept intact on the flash drive, forever. Also, a file is created for persistent storage and during boot it is accessed together with the image by overlayfs. This, in my opinion, has the following problems: If system is updated regularly, then files from the image are overwritten in persistent storage, doubling their size and wasting precious space. Persistent storage has a fixed size that you have to define from the start, again, wasting precious space. I'm not 100% sure, but maybe using overlayfs makes disk access slower, and more so on the relatively slow devices. So I'd like to find another solution: either to get rid of the original image or to install Ubuntu "normally" on the separate ext2 partition, or maybe even install it in the main vfat partition on the USB stick. Suggestions?

  Read the article

• Accessing second hard drive

  - by Jonathan

  Hi, So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris

  Read the article

• Difficulty Mounting Volumes on a Partitioned External HD

  - by Todd

  I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

  Read the article

• Encrypt SSD or not?

  - by JamesBradbury

  My desktop machine is running Ubuntu 12.04 (and will probably stay with it until the next LTS). I've got a new 120GB SSD on the way as my existing 420GB spinning disk. If it makes any difference I'll be dual-booting with Windows 7 across both disks too. I've read some helpful answers here about /home setup and enabling TRIM, which I intend to follow. So most of my /home will be on the SSD, with only photos, videos and music on the spinning disk. The question is, when I reinstall Ubuntu from CD or USB, whether I should encrypt the SSD? Specifically: I'm reading that drive wear isn't much of an issue with modern SSDs as they last decades even if you spam them. Is this true? How big a performance reduction will encrypting cause (I have an i7 Sandybridge, so I guess it can cope)? Is it more important from a security point of view to encrypt an SSD? I think I read somewhere that it may be hard to reliably wipe data. By all means answer even if you only know about one of those things.

  Read the article

• Operating System not Found after installing Ubuntu in a Sony Vaio

  - by diego8arock

  I just bought a Sony Vaio SVS15115FLB that came with Windows 7, after enjoying the PC graphic power for a little, I decided it was time to install Ubuntu 12.04. First, I inserted a USB stick, reboot, press F11 but a message saying that no OS was found on the USB, so then I used a live CD. It booted fine and I installed Ubuntu, then when it was time to restart the PC, it didn't boot to GRUB but it went straight to Windows and it began an startup error and was looking for a solution, after it was done, it restarted and then it booted again to Windows and to the same start up error solution thing. I freaked out, so I booted again the Ubuntu live CD, and installed Ubuntu over everything, after it installed I rebooted and then a message appeared saying Operating system Not Found, and I have no idea why. So I Googled again and found this post on Boot Partition, I did everything exactly on that post, but it didn't work (by the way, this was the message): The boot files of [Ubuntu 12.04 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. It appeared the first time, then I did it all again and then it was gone. I rebooted and nothing, the same Operating System not found message appeared. So I decided to create a partition for Windows, hoping for something, but the message still appears. I really have no idea what to do, but there is something odd, if I insert the USB stick containing Ubuntu 11.10, the message that says that there is no OS in the PendDrive flashes for a fraction of a second and the boot straight to Ubuntu 12.04 without problems (and booted to Windows when I installed it, ignoring Ubuntu), right now I'm using it like that, but its pretty annoying. Can anyone advise me how to fix this? I'm no expert on this kind of things (boot, GRUB, recovery and stuff like that).

  Read the article

• Deleting Unused Swaps Partions

  - by Nikita Kononov

  Good evening everyone , I got a little issue with Swap Partitions. Due to some issues after installing Ubuntu first time, I reinstalled it and now I have 3 Swaps. Here is sudo fdisk -l result Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xaa9693fe Device Boot Start End Blocks Id System /dev/sda1 2048 52430847 26214400 1c Hidden W95 FAT32 (LBA) /dev/sda2 * 52430848 540677076 244123114+ 7 HPFS/NTFS/exFAT /dev/sda3 540678142 1465147391 462234625 5 Extended Partition 3 does not start on physical sector boundary. /dev/sda5 1452750848 1465147391 6198272 82 Linux swap / Solaris /dev/sda6 1440352256 1452742655 6195200 82 Linux swap / Solaris /dev/sda7 540678144 1427951615 443636736 83 Linux /dev/sda8 1427953664 1440339967 6193152 82 Linux swap / Solaris So Swaps in /dev/sda5 and /dev/sda6 are no longer in use as far as I understand and thus I was planning to delete them, however faced a problem. What I did is download and burn Gparted Live CD and boot it up, tried to delete those partitions but I have no idea how to add 12GB unallocated memory to the existing OS partition in this case to /dev/sda7 Is there anyway I can delete 2 swaps and extend unallocated memory to /dev/sda7 partion? Thank you in advance!

  Read the article

• LDoms with Solaris 11

  - by Orgad Kimchi

  Oracle VM Server for SPARC (LDoms) release 2.2 came out on May 24. You can get the software, see the release notes, reference manual, and admin guide here on the Oracle VM for SPARC page. Oracle VM Server for SPARC enables you to create multiple virtual systems on a single physical system.Each virtual system is called alogical domain and runs its own instance of Oracle Solaris 10 or Oracle Solaris 11. The version of the Oracle Solaris OS software that runs on a guest domain is independent of the Oracle Solaris OS version that runs on the primary domain. So, if you run the Oracle Solaris 10 OS in the primary domain, you can still run the Oracle Solaris 11 OS in a guest domain, and if you run the Oracle Solaris 11 OS in the primary domain, you can still run the Oracle Solaris 10 OS in a guest domain In addition to that starting with the Oracle VM Server for SPARC 2.2 release you can migrate guest domain even if source and target machines have different processor type. You can migrate guest domain from a system with UltraSPARC  T2+ or SPARC T3 CPU to a system with a SPARC T4 CPU.The guest domain on the source and target system must run Solaris 11 In order to enable cross CPU migration.In addition to that you need to change the cpu-arch property value on the source system. For more information about Oracle VM Server for SPARC (LDoms) with Solaris 11 and  Cross CPU Migration refer to the following white paper

  Read the article

• Missed OpenWorld? Fear not. Customer Service Presentations for you!

  - by Tuula Fai

  As a Customer Service professional, you know the most frightening thing is having mission-critical systems go down when you’re trying to support customers. So while others are munching on candy this Halloween, why not spend your time listening to these Oracle OpenWorld sessions?   Oracle Service Vision and Roadmap Oracle RightNow Cross-Channel Contact Center Oracle RightNow Web Customer Service Oracle RightNow Chat Cloud Service & Oracle RightNow Virtual Assistant Cloud Service Oracle RightNow Social Customer Service Oracle RightNow Cloud Service - Upgrades Oracle Service – EBS Field Service Oracle Service – Siebel Service Oracle Service – Siebel Field Service In these presentations, you will learn the latest capabilities available in Oracle’s Service solutions for delivering a great customer experience. Like the ability to … Serve Your Customers Anywhere to maintain one seamless dialogue Turn Your Contact Center into a Profit Center by giving personal offers Use Social to Get Ahead of Service Issues by capturing and responding to posts Offer Help a Click Away on your support site at the point of need Humanize Web Self-Service with a Virtual Assistant that uses natural conversation As journalist Robert Liparulo said, “Knowledge was like candy: you never turned it down, especially if you didn't have to work too hard to get it.” It’s right here. Listen, Learn and Lead.

  Read the article

• USB and CD data cannot be read or mounted in 12.10

  - by aravind4j

  I'm using Ubuntu 12.10. I wrote a data disk using Brasero Disk Burner, but the system cannot read the CD. I tried to write the same data into my HP v220w pen drive but now there is an error in that too. It shows the following: Error mounting /dev/sdb at /media/aravind4j/Aravind4j: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb" "/media/aravind4j/Aravind4j"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. (udisks-error-quark, 0) I used a NTFS file system for the pen drive as you can recognize from the above statement. I would like to recover the files so please help me recover the files without formatting the drive.

  Read the article

• virt-install says name is in use, but virsh list --all is empty. Where is virt-install finding this name?

  - by Jay _silly_evarlast_ Wren

  virt-install says name is in use, but virsh list --all says there is nothing. jrwren@delays:{%22}~ $ virt-install -d -n android -r 512 --disk android.qcow2 -s 4 -c /d/cd\ images/android-x86-2.2-generic.iso --vnc --noautoconsole [Thu, 05 Jul 2012 16:57:19 virt-install 23170] DEBUG (cli:220) Launched with command line: /usr/bin/virt-install -d -n android -r 512 --disk android.qcow2 -s 4 -c /d/cd images/android-x86-2.2-generic.iso --vnc --noautoconsole [Thu, 05 Jul 2012 16:57:19 virt-install 23170] DEBUG (cli:326) Requesting libvirt URI default [Thu, 05 Jul 2012 16:57:19 virt-install 23170] DEBUG (cli:328) Received libvirt URI qemu:///session [Thu, 05 Jul 2012 16:57:20 virt-install 23170] DEBUG (virt-install:259) Requesting virt method 'default', hv type 'default'. [Thu, 05 Jul 2012 16:57:20 virt-install 23170] DEBUG (virt-install:469) Received virt method 'hvm' [Thu, 05 Jul 2012 16:57:20 virt-install 23170] DEBUG (virt-install:470) Hypervisor name is 'kvm' [Thu, 05 Jul 2012 16:57:20 virt-install 23170] DEBUG (cli:950) --graphics compat generated: vnc [Thu, 05 Jul 2012 16:57:20 virt-install 23170] ERROR (cli:597) Guest name 'android' is already in use. (venv)jrwren@delays:{%22}~ $ sudo virsh -c qemu:///system list --all Id Name State ---------------------------------- Where is virt-install finding this name? edit: I should mention that LIBVIRT_DEFAULT_URI is not set.

  Read the article

< Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >