Search Results

Search found 22986 results on 920 pages for 'array difference'.

Page 297/920 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

• How to re-add RAID-10 dropped drive?

  - by thiesdiggity

  I have a problem that I can't seem to solve. We have a Ubuntu server setup with RAID-10 and two of the drives dropped out of the array. When I try to re-add them using the following command: mdadm --manage --re-add /dev/md2 /dev/sdc1 I get the following error message: mdadm: Cannot open /dev/sdc1: Device or resource busy When I do a "cat /proc/mdstat" I get the following: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [r$ md2 : active raid10 sdb1[0] sdd1[3] 1953519872 blocks 64K chunks 2 near-copies [4/2] [U__U] md1 : active raid1 sda2[0] sdc2[1] 468853696 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdc1[1] 19530688 blocks [2/2] [UU] unused devices: <none> When I run "/sbin/mdadm --detail /dev/md2" I get the following: /dev/md2: Version : 00.90 Creation Time : Mon Sep 5 23:41:13 2011 Raid Level : raid10 Array Size : 1953519872 (1863.02 GiB 2000.40 GB) Used Dev Size : 976759936 (931.51 GiB 1000.20 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Thu Oct 25 09:25:08 2012 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : c6d87d27:aeefcb2e:d4453e2e:0b7266cb Events : 0.6688691 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed 2 0 0 2 removed 3 8 49 3 active sync /dev/sdd1 Output of df -h is: Filesystem Size Used Avail Use% Mounted on /dev/md1 441G 2.0G 416G 1% / none 32G 236K 32G 1% /dev tmpfs 32G 0 32G 0% /dev/shm none 32G 112K 32G 1% /var/run none 32G 0 32G 0% /var/lock none 32G 0 32G 0% /lib/init/rw tmpfs 64G 215M 63G 1% /mnt/vmware none 441G 2.0G 416G 1% /var/lib/ureadahead/debugfs /dev/mapper/RAID10VG-RAID10LV 1.8T 139G 1.6T 8% /mnt/RAID10 When I do a "fdisk -l" I can see all the drives needed for the RAID-10. The RAID-10 is part of the /dev/mapper, could that be the reason why the device is coming back as busy? Anyone have any suggestions on what I can try to get the drives back into the array? Any help would be greatly appreciated. Thanks!

  Read the article

• PostgreSQL RAID configuration

  - by Yoldar-Zi

  I'm stuck how best to configure disk array. We have Hp P2000 G3 disk array with 24 SAS physical disks 300Gb each. We need to configure this array got 2 copies of PostgreSQL 9.2 because two different system. As we know it's recommended to store database and transaction logs(pg_xlog) files on separate disks. So we must setup 4 logical disk: 2 for transaction logs with RAID 1 2 for database with RAID 10 Is this right scheme of distribution? Or may be it is best to just make one big RAID 10 with 4 logical disks?

  Read the article

• Ubuntu 10.10 not recognizing external hard drive

  - by sr71

  Installed Ubuntu 10.10 on a hard drive by itself (no windows). All updates are up to date. Everything`works fine except when I plug in a 320 gig Toshiba external hard drive....it is not recognized. When I plug in an 8 gig flash drive it is recognized no problem. What do I mean by "not recognized"? I mean: how do you know it was not recognized. You can check the command "cat /proc/partitions" in a terminal with and without the hdd attached. If you see some difference, it's ok. If the difference is something like "sda1" (sd+letter+number) then you have partition on it, maybe it can't be handled in Ubuntu (no filesystem on it or so). If there is only "sda" in the difference for example (sd+letter, but no number after it) then the drive itself is detected, just no partition is created on it. Also you can check out the messages of the kernel, with the "dmesg" command in the terminal. If there is no disk/partition/anything in /proc/partitions, there can be an USB level problem, you can issue command "lsusb" as it was suggested before my answer. It's really matter of what do you mean about "not recognized". @Marco Ceppi @Oli @Pitto By "not recognized" I meant that when I plug in a 8 gig flash drive an icon immediately appears on the desktop imdicating that there is a flash drive plugged in and I can click on it and view the files on the flash drive. It also shows up on the "Nautilus" default file manager. When I plug in the 320 gig Toshiba external hard drive, I get no indication on the desktop or the file manager (thus "not recogized"). When I run the command "cat/proc/partitions/" I get an error message Could not open location 'file:///home/bob/cat/proc/partitions' with or without the external hard drive installed. With the "dmeg" command I get about 10 pages of info with no mention of disk/partition/anything in /proc/partitions. When I run "lsub" command I get the following: bob@bob-desktop:~$ lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 04b3:3003 IBM Corp. Rapid Access III Keyboard Bus 003 Device 002: ID 04b3:3004 IBM Corp. Media Access Pro Keyboard Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub bob@bob-desktop:~$

  Read the article

• 4TB HGST SATA drive only shows 1.62 TB in Windows Server 2012

  - by user136085

  I'm using a Supermicro X9SRE-3F motherboard with the latest BIOS and 2x 4TB drives connected to the on-board SATA controller. If I set the BIOS to RAID and create a RAID 1 array, the array shows up in the BIOS as 3.6TB. However when I boot Windows (on a separate RAID 1 array), the 4TB drives show up individually in disk manager as 2x 1.62TB drives. I could use Windows 2012 to set up software RAID 1, but when I set the BIOS back to 2x individual drives, they still show up in Windows as 2x 1.62TB drives. How do I access the full capacity of these drives? Thanks, Brian Bulaw

  Read the article

• Dell EqualLogic vs. EMC VNXe [closed]

  - by Untalented

  We've been looking into SMB SANs and based on the competitive pricing I've been getting we're really liking these two array's. There are some pro's to both solutions, but I've unable to really decide which to choose. The EMC offers better expandability since you can buy an additional shelf (roughly $1200) and can add drives then to the array. However, the Dell unit is still very nice. Can anyone comment on their experiences with the two and thoughts on this? Also, to get the VMware Storage API support you need VMware Enterprise. How much additional performance does this provide? It's roughly $15k more than the Essentials Plus bundle we're looking at (this is a small environment [3 Hosts 1 Array].

  Read the article

• Removing ocurrances of characters in a string

  - by DmainEvent

  I am reading this book, programming Interviews exposed by John Wiley and sons and in chapter 6 they are discussing removing all instances of characters in a src string using a removal string... so removeChars(string str, string remove) In there writeup they sey the steps to accomplish this are to have a boolean lookup array with all values initially set to false, then loop through each character in remove setting the corresponding value in the lookup array to true (note: this could also be a hash if the possible character set where huge like Unicode-16 or something like that or if str and remove are both relatively small... < 100 characters I suppose). You then iterate through the str with a source and destination index, copying each character only if its corresponding value in the lookup array is false... Which makes sense... I don't understand the code that they use however... They have for(src = 0; src < len; ++src){ flags[r[src]] == true; } which is turning the flag value at the remove string indexed at src to true... so if you start out with PLEASE HELP as your str and LEA as your remove you will be setting in your flag table at 0,1,2... t|t|t but after that you will get an out of bounds exception because r doesn't have have anything greater than 2 in it... even using there example you get an out of bounds exception... Am is there code example unworkable?

  Read the article

• Problem Solving vs. Solution Finding

  - by ryanabr

  By enlarge, most developers fall into these two camps I will try to explain what I mean by way of example. A manager gives the developer a task that is communicated like this: “Figure out why control A is not loading on this form”. Now, right there it could be argued that the manager should probably have given better direction and said something more like: “Control A is not loading on the Form, fix it”. They might sound like the same thing to most people, but the first statement will have the developer problem solving the reason why it is failing. The second statement should have the developer looking for the solution to make it work, not focus on why it is broken. In the end, they might be the same thing, but I usually see the first approach take way longer than the second approach. The Problem Solver: The problem solver’s approach to fixing something that is broken is likely to take the error or behavior that is being observed and start to research it using a tool like Google, or any other search engine. 7/10 times this will yield results for the most common of issues. The challenge is in the other 30% of issues that will take the problem solver down the rabbit hole and cause them not to surface for days on end while every avenue is explored for the cause of the problem. In the end, they will probably find the cause of the issue and resolve it, but the cost can be days, or weeks of work. The Solution Finder: The solution finder’s approach to a problem will begin the same way the Problem Solver’s approach will. The difference comes in the more difficult cases. Rather than stick to the pure “This has to work so I am going to work with it until it does” approach, the Solution Finder will look for other ways to get the requirements satisfied that may or may not be using the original approach. For example. there are two area of an application of externally equivalent features, meaning that from a user’s perspective, the behavior is the same. So, say that for whatever reason, area A is now not working, but area B is working. The Problem Solver will dig in to see why area A is broken, where the Solution Finder will investigate to see what is the difference between the two areas and solve the problem by potentially working around it. The other notable difference between the two types of developers described is what point they reach before they re-emerge from their task. The problem solver will likely emerge with a triumphant “I have found the problem” where as the Solution Finder will emerge with the more useful “I have the solution”. Conclusion At the end of the day, users are what drives features in software development. With out users there is no need for software. In todays world of software development with so many tools to use, and generally tight schedules I believe that a work around to a problem that takes 8 hours vs. the more pure solution to the problem that takes 40 hours is a more fruitful approach.

  Read the article

• Knowing state of game in real time

  - by evthim

  I'm trying to code a tic tac toe game in java and I need help figuring out how to efficiently and without freezing the program check if someone won the game. I'm only in the design stages now, I haven't started programming anything but I'm wondering how would I know at all times the state of the game and exactly when someone wins? Response to MarkR: (note: had to place comment here, it was too long for comment section) It's not a homework problem, I'm trying to get more practice programming GUI's which I've only done once as a freshman in my second introductory programming course. I understand I'll have a 2D array. I plan to have a 2D integer array where x would equal 1 and o would equal 0. However, won't it take too much time if I check after every move if someone won the game? Is there a way or a data structure or algorithm I can use so that the program will know the state (when I say state I mean not just knowing every position on the board, the int array will take care of that, I mean knowing that user 1 will win if he places x on this block) of the game at all times and thus can know automatically when someone won?

  Read the article

• Cube chunk via list ToArray()

  - by Christian Frantz

  I've created a list of vertices that I call for each cube made in my array "cubes". When each cube is create, SetUpVertices is called which is a method that stores the 8 vertices of my cube. At the end of my list creation, I create a vertex buffer, and set the data of the list that contains vertices of all 25 cubes to that vertex buffer, effectively creating a "chunk" of cubes. The problem is that Invalid Operation Exception "The array is not the correct size for the amount of data requested." at the line vertices.ToArray(). I don't have an array for this, as the amount of cubes will be changing and arrays aren't dynamic. What could be the cause of this? for (int x = 0; x < 5; x++) { for (int z = 0; z < 5; z++) { SetUpVertices(); cubes.Add(new Cube(device, new Vector3(x, map[x, z], z), color)); } } vertexBuffer = new VertexBuffer(device, typeof(VertexPositionColor), 8, BufferUsage.WriteOnly); vertexBuffer.SetData<VertexPositionColor>(vertices.ToArray());

  Read the article

• OpenGL Application displays only 1 frame

  - by Avi

  EDIT: I have verified that the problem is not the VBO class or the vertex array class, but rather something else. I have a problem where my vertex buffer class works the first time its called, but displays nothing any other time its called. I don't know why this is, and it's also the same in my vertex array class. I'm calling the functions in this order to set up the buffers: enable client states bind buffers set buffer / array data unbind buffers disable client states Then in the draw function, that's called every frame: enable client states bind buffers set pointers unbind buffers bind index buffer draw elements unbind index buffer disable client states Is there something wrong with the order in which I'm calling the functions, or is it a more specific code error? EDIT: here's some of the code Code for setting pointers: //element is the vertex attribute being drawn (e.g. normals, colors, etc.) static void makeElementPointer(VertexBufferElements::VBOElement element, Shader *shade, void *elementLocation) { //elementLocation is BUFFER_OFFSET(n) if a buffer is bound switch (element) { .... glVertexPointer(3, GL_FLOAT, 0, elementLocation); //changes based on element .... //but I'm only dealing with } //vertices for now } And that's basically all the code that isn't just a straight OpenGL function call.

  Read the article

• Will URL encoding the image names

  - by TheGateKeeper

  Just wondering if it makes any difference to Google whether or not I URL encode the image names when linking to them. For example if I have an image named "test-1234-!.jpg", does it make a difference if I name it refer to it as "test-1234-%21.jpg"? The reason I am asking is because I am doing a major shift in the way my website works and while all new image names will not be URL encoded, all of the past ones are. I want to see if it is worth it renaming all of them or if I should just leave it like that.

  Read the article

• How can I design my classes to include calendar events stored in a database?

  - by Gianluca78

  I'm developing a web calendar in php (using Symfony2) inspired by iCal for a project of mine. At this moment, I have two classes: a class "Calendar" and a class "CalendarCell". Here you are the two classes properties and method declarations. class Calendar { private $month; private $monthName; private $year; private $calendarCellList = array(); private $translator; public function __construct($month, $year, $translator) {} public function getCalendarCellList() {} public function getMonth() {} public function getMonthName() {} public function getNextMonth() {} public function getNextYear() {} public function getPreviousMonth() {} public function getPreviousYear() {} public function getYear() {} private function calculateDaysPreviousMonth() {} private function calculateNumericDayOfTheFirstDayOfTheWeek() {} private function isCurrentDay(\DateTime $dateTime) {} private function isDifferentMonth(\DateTime $dateTime) {} } class CalendarCell { private $day; private $month; private $dayNameAbbreviation; private $numericDayOfTheWeek; private $isCurrentDay; private $isDifferentMonth; private $translator; public function __construct(array $parameters) {} public function getDay() {} public function getMonth() {} public function getDayNameAbbreviation() {} public function isCurrentDay() {} public function isDifferentMonth() {} } Each calendar day can includes many calendar events (such as appointments or schedules) stored in a database. My question is: which is the best way to manage these calendar events in my classes? I think to add a eventList property in CalendarCell and populate it with an array of CalendarEvent objects fetched by the database. This kind of solution doesn't allow other coders to reuse the classes without db (because I should inject at least a repository services also) just to create and visualize a calendar... so maybe it could be better to extend CalendarCell (for instance in CalendarCellEvent) and add the database features? I feel like I'm missing some crucial design pattern! Any suggestion will be very appreciated!

  Read the article

• Material tiling and offset in unity

  - by Simran kaur

  Ambiguity: What exactly is the difference between Tiling the material and Offset of material? Need to do: I need the material to be repeated n times on the object where I need to set the value of n via script.How do I do it? It seems to happen through Tiling(tried via inspector) but again what is difference between mainTextureOffset and setTextureOffset? Tried: Following is the line of code that I tried to repeat the texture n number of times on an object(repeat across the width of object), but it does nothing significant that I can see.

  Read the article

• What are the differences between programming languages? [closed]

  - by Omega

  Once upon a time, I heard from someone the only difference between programming languages is the syntax I wanted to deny it - to say that there are other fundamental aspects that truly set a language apart from others than just syntax. But I couldn't... So, can you? Whenever I search Google for something like "differences between programming languages", the results tend to be debates between two specific languages (I'd like something more general) - however, some of the aspects that people seemed to debate the most were: Object-Oriented Method/Operator overloading (I actually see this rather related to syntax) Garbage-Collection (While it seems like a good difference, for some reason it doesn't seem that "fundamental") What important aspects other than syntax can you think of?

  Read the article

• Programatically loading user controls

  - by PhilSando

  Today's little problem is that I am trying to load user controls from my codebehind like so: Dim myControl As UserControl = Page.LoadControl("~\Modules\Content.ascx")              Controls.Add(myControl)  On running the page myControl is no where to be seen. I wonder why that is? Well after a bit of thought the following come to mind... Am I using the correct code to insert the usercontrol? Is there an alternative available? Does the fact that the usercontrol has a page_load method make a difference? Does the fact that the usercontrol is being called from the page_init method make a difference? Do I need to register the control in my aspx page at design time? I'll be looking to answer these questions as the day goes on!

  Read the article

• misaligned raid partition in Ubuntu 10.04

  - by Linux Jedi

  I attached two identical hard drives to my linux machine. Then using gparted I formated the first 1024 mb at the beginning of each drive as linux swap space. Then I went into system-administration-disk utility. In there I went to file-create-RAID array. I selected the remaining space in each of the two identical hard drives and created a striped raid array. After the array was created, a warning message appeared. It said "The partition is misaligned by 522240 bytes. This may result in very poor performance. Repartitioning is suggested." What do I do now? As far as I can tell, the partitions are identical.

  Read the article

• Retrieving database column using JSON [migrated]

  - by arokia

  I have a database consist of 4 columns (id-symbol-name-contractnumber). All 4 columns with their data are being displayed on the user interface using JSON. There is a function which is responisble to add new column to the database e.g (countrycode). The coulmn is added successfully to the database BUT not able to show the new added coulmn in the user interface. Below is my code that is displaying the columns. Can you help me? table.php $(document).ready(function () { // prepare the data var theme = getDemoTheme(); var source = { datatype: "json", datafields: [ { name: 'id' }, { name: 'symbol' }, { name: 'name' }, { name: 'contractnumber' } ], url: 'data.php', filter: function() { // update the grid and send a request to the server. $("#jqxgrid").jqxGrid('updatebounddata', 'filter'); }, cache: false }; var dataAdapter = new $.jqx.dataAdapter(source); // initialize jqxGrid $("#jqxgrid").jqxGrid( { source: dataAdapter, width: 670, theme: theme, showfilterrow: true, filterable: true, columns: [ { text: 'id', datafield: 'id', width: 200 }, { text: 'symbol', datafield: 'symbol', width: 200 }, { text: 'name', datafield: 'name', width: 100 }, { text: 'contractnumber', filtertype: 'list', datafield: 'contractnumber' } ] }); }); data.php <?php #Include the db.php file include('db.php'); $query = "SELECT * FROM pricelist"; $result = mysql_query($query) or die("SQL Error 1: " . mysql_error()); $orders = array(); // get data and store in a json array while ($row = mysql_fetch_array($result, MYSQL_ASSOC)) { $pricelist[] = array( 'id' => $row['id'], 'symbol' => $row['symbol'], 'name' => $row['name'], 'contractnumber' => $row['contractnumber'] ); } echo json_encode($pricelist); ?>

  Read the article

• Accounting for waves when doing planar reflections

  - by CloseReflector

  I've been studying Nvidia's examples from the SDK, in particular the Island11 project and I've found something curious about a piece of HLSL code which corrects the reflections up and down depending on the state of the wave's height. Naturally, after examining the brief paragraph of code: // calculating correction that shifts reflection up/down according to water wave Y position float4 projected_waveheight = mul(float4(input.positionWS.x,input.positionWS.y,input.positionWS.z,1),g_ModelViewProjectionMatrix); float waveheight_correction=-0.5*projected_waveheight.y/projected_waveheight.w; projected_waveheight = mul(float4(input.positionWS.x,-0.8,input.positionWS.z,1),g_ModelViewProjectionMatrix); waveheight_correction+=0.5*projected_waveheight.y/projected_waveheight.w; reflection_disturbance.y=max(-0.15,waveheight_correction+reflection_disturbance.y); My first guess was that it compensates for the planar reflection when it is subjected to vertical perturbation (the waves), shifting the reflected geometry to a point where is nothing and the water is just rendered as if there is nothing there or just the sky: Now, that's the sky reflecting where we should see the terrain's green/grey/yellowish reflection lerped with the water's baseline. My problem is now that I cannot really pinpoint what is the logic behind it. Projecting the actual world space position of a point of the wave/water geometry and then multiplying by -.5f, only to take another projection of the same point, this time with its y coordinate changed to -0.8 (why -0.8?). Clues in the code seem to indicate it was derived with trial and error because there is redundancy. For example, the author takes the negative half of the projected y coordinate (after the w divide): float waveheight_correction=-0.5*projected_waveheight.y/projected_waveheight.w; And then does the same for the second point (only positive, to get a difference of some sort, I presume) and combines them: waveheight_correction+=0.5*projected_waveheight.y/projected_waveheight.w; By removing the divide by 2, I see no difference in quality improvement (if someone cares to correct me, please do). The crux of it seems to be the difference in the projected y, why is that? This redundancy and the seemingly arbitrary selection of -.8f and -0.15f lead me to conclude that this might be a combination of heuristics/guess work. Is there a logical underpinning to this or is it just a desperate hack? Here is an exaggeration of the initial problem which the code fragment fixes, observe on the lowest tessellation level. Hopefully, it might spark an idea I'm missing. The -.8f might be a reference height from which to deduce how much to disturb the texture coordinate sampling the planarly reflected geometry render and -.15f might be the lower bound, a security measure.

  Read the article

• Expanding RAID-5

  - by Garry

  I'm new to RAID and trying to get my head around things. I have owned a Drobo in the past (which I liked) but it failed. Here's a hypothetical scenario: Assume I set up a RAID-5 array consisting of four 1TB hot-swappable 2.5" SATA drives. I name this volume 'My Data'. By my calculations, that would give me 2.7TB of usable space and the ability to recover if a single drive fails. I have a few questions: What happens if I pull out a single 1TB drive and replace it with a 2TB drive? Would the array automatically rebuild itself with no issues? Would the maximum capacity remain 2.7TB? If number (1) above is true and the array rebuilds itself with three 1TB drives one 2TB drive what would happen if I then pulled another 1TB drive out and stuck in a 2TB drive (you can see where I'm going here can't you). Would I eventually be able to gain more storage by gradually adding bigger drives? From a practical point of view, how much input is required from me as the end user whilst these drives are being pulled out and put in? On the Drobo, the storage space just automagically handles itself. Would I have to be actively involved in telling Ubuntu what was going on or would any of it be automated? Thanks in advance,

  Read the article

• Windows XP 32-bit + RocketRaid 622 + 4 x 3TB = not quite a RAID setup

  - by gmoney

  I'm looking to make a 6TB RAID 10 array from my new pile of drives under Windows XP 32-bit, however they are only for auxiliary storage. After adding all the drives to an array, and initializing them XP sees only a fraction of the storage, 2TB. I'm assuming this has to do with MBR vs GPT. Is making a series of 2TB volumes and then spanning my only solution? Most questions online have to do with booting from this setup, but I'm just using them as extra storage. Hardware: 4 x 3TB Hitachi Deskstars + RocketRaid 622 + Sans Digital TR8M TowerRAID. The array is connected via eSATA.

  Read the article

• Unnamed Refactoring

  - by Liam McLennan

  This post is a message in a bottle. It cast it into the sea in the hope that it will one day return to me, stuffed to the cork with enlightenment. Yesterday I  tweeted, what is the name of the pattern where you replace a multi-way conditional with an associative array? I said ‘pattern’ but I meant ‘refactoring’. Anyway, no one replied so I will describe the refactoring here. Programmers tend to think imperatively, which leads to code such as: public int GetPopulation(string country) { if (country == "Australia") { return 22360793; } else if (country == "China") { return 1324655000; } else if (country == "Switzerland") { return 7782900; } else { throw new Exception("What ain't no country I ever heard of. They speak English in what?"); } } which is horrid. We can write a cleaner version, replacing the multi-way conditional with an associative array, treating the conditional as data: public int GetPopulation(string country) { if (!Populations.ContainsKey(country)) throw new Exception("The population of " + country + " could not be found."); return Populations[country]; } private Dictionary<string, int> Populations { get { return new Dictionary<string, int> { {"Australia", 22360793}, {"China", 1324655000}, {"Switzerland", 7782900} }; } } Does this refactoring already have a name? Otherwise, I propose Replace multi-way conditional with associative array

  Read the article

• DB Object passing between classes singleton, static or other?

  - by Stephen

  So I'm designing a reporting system at work it's my first project written OOP and I'm stuck on the design choice for the DB class. Obviously I only want to create one instance of the DB class per-session/user and then pass it to each of the classes that need it. What I don't know it what's best practice for implementing this. Currently I have code like the following:- class db { private $user = 'USER'; private $pass = 'PASS'; private $tables = array( 'user','report', 'etc...'); function __construct(){ //SET UP CONNECTION AND TABLES } }; class report{ function __construct ($params = array(), $db, $user) { //Error checking/handling trimed //$db is the database object we created $this->db = $db; //$this->user is the user object for the logged in user $this->user = $user; $this->reportCreate(); } public function setPermission($permissionId = 1) { //Note the $this->db is this the best practise solution? $this->db->permission->find($permissionId) //Note the $this->user is this the best practise solution? $this->user->checkPermission(1) $data=array(); $this->db->reportpermission->insert($data) } };//end report I've been reading about using static classes and have just come across Singletons (though these appear to be passé already?) so what's current best practice for doing this?

  Read the article

• Storing revisions of a document

  - by dev.e.loper

  This is a follow up question to my original question. I'm thinking of going with generating diffs and storing those diffs in the database 'History' table. I'm using diff-match-patch library to generate what is called a 'patch'. On every save, I compare previous and new version and generate this patch. The patch could be used to generate a document at specific point in time. My dilemma is how to store this data. Should I: a Insert a new database record for every patch? b. Store these patches in javascript array and store that array in history table. So there is only one db History record for document with an array of all the patches. Concerns with: a. Too many db records generated. Will be slow and CPU intensive to query. b. Only one record. If record is somehow corrupted/deleted. Entire revision history is gone. I'm looking for suggestions, concerns with either approach.

  Read the article

• RAID 10, how layout works ?

  - by Bastien974

  I'm trying to figure out how exactly works the RAID 10 in linux with mdadm. I want to create a RAID 10 out of 4 partitions, let's say a, b, c and d. a and b are on the array 1, c and d array 2. So what I want is to have the couple a and b, c and d in RAID 0. Then on top of that, a RAID 1. The option in the mdadm command to configure the layout is -p, --layout with option : near, far, offset see here I want to keep my data safe if the array 1 fails for example, that would mean that every chunk of data are always copied on both arrays. How do I have to set my RAID 10, near or far ?

  Read the article

• How can I design my classes for a calendar based on database events?

  - by Gianluca78

  I'm developing a web calendar in php (using Symfony2) inspired by iCal for a project of mine. At this moment, I have two classes: a class "Calendar" and a class "CalendarCell". Here you are the two classes properties and method declarations. class Calendar { private $month; private $monthName; private $year; private $calendarCellList = array(); private $translator; public function __construct($month, $year, $translator) {} public function getCalendarCells() {} public function getMonth() {} public function getMonthName() {} public function getNextMonth() {} public function getNextYear() {} public function getPreviousMonth() {} public function getPreviousYear() {} public function getYear() {} private function calculateDaysPreviousMonth() {} private function calculateNumericDayOfTheFirstDayOfTheWeek() {} private function isCurrentDay(\DateTime $dateTime) {} private function isDifferentMonth(\DateTime $dateTime) {} } class CalendarCell { private $day; private $month; private $dayNameAbbreviation; private $numericDayOfTheWeek; private $isCurrentDay; private $isDifferentMonth; private $translator; public function __construct(array $parameters) {} public function getDay() {} public function getMonth() {} public function getDayNameAbbreviation() {} public function isCurrentDay() {} public function isDifferentMonth() {} } Each calendar day can includes many events stored in a database. My question is: which is the best way to manage these events in my classes? I think to add a eventList property in CalendarCell and populate it with an array of CalendarEvent objects fetched by the database. This kind of solution doesn't allow other coders to reuse the classes without db (because I should inject at least a repository services also) just to create and visualize a calendar... so maybe it could be better to extend CalendarCell (for instance in CalendarCellEvent) and add the database features? I feel like I'm missing some crucial design pattern! Any suggestion will be very appreciated!

  Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >