Search Results

Search found 24400 results on 976 pages for 'print screen'.

Page 297/976 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

  • SSH Tunnel for Remote Desktop via Intermediary Server Part II

    - by Mihai Todor
    I asked previously how to configure 2 SSH tunnels using an intermediary server in order to run Remote Desktop through them and I managed to make it work. Now, I'm trying to do the same, using the same machines, but in reverse order. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, on which I wish to do Remote Desktop from the PC. I use Putty on the laptop to create a reverse tunnel from it to the Linux server: R60666 localhost:3389. I use Putty on the PC to create a regular tunnel from it to the Linux server: L60666 localhost:60666. I SSH to the Linux sever and I run telnet localhost 60666 and it seems to produce the expected output, as described in the debugging tips that I received here. I try to connect Remote Desktop from the PC to the laptop: localhost:60666. It asks for my username and password, I click OK and it locks my current session on the laptop (so I see the welcome screen on the laptop instead of my desktop), it shows the "Welcome" message in the Remote Desktop screen and then it just goes black. It doesn't disconnect, it doesn't provide any error and I'm not able to perform any actions in the Remote Desktop screen. I tried the same setup with a Windows XP laptop and I'm experiencing the same symptoms. I also tried to use different ports than 60666, but nothing changed. Does anybody have any idea what I'm doing wrong? Update: As pointed out by @jwinders, I'm not able to run telnet PC 3389 from the Linux server directly. Since Windows Firewall has a rule to allow all connections on port 3389, I have no idea what is blocking it. Fortunately, I'm able to create a SSH tunnel from the Linux machine to the PC ssh 3389:localhost:3389 'domain\user'@PC.

    Read the article

  • Xerox phaser 7760 prints gray as pink.

    - by Leif
    I have a Xerox phaser 7760 and 60 iMacs that dual boot xp and osx 10.5. They print without problem to other printers, but if you print to the 7760 anything gray scale comes out with a pink tint. This happens from all 60 computers windows or mac boot from any application. I have reinstalled the driver and run the color balance on the printer. The printer does fine on internal prints of gray for diagnostic pages. Any ideas on how to solve this?

    Read the article

  • Canon MF3200 Printer Problems

    - by Derick K.
    I bought a Canon MF3200 and used it on an old Windows laptop. The laptop broke, and now I'm trying to setup the printer on a laptop with Windows 7. I downloaded the new driver, and Windows was able to install it and mark it "Ready to Go." But whenever I try to print, an error comes up and it doesn't print. I tried to troubleshoot, to no avail. What else can I do? Any ideas on what the error might be?

    Read the article

  • nginx can't load images,css,js

    - by EquinoX
    When I point to a URL in nginx where it has images extension such as: http://50.56.81.42/phpMyAdmin/themes/original/img/logo_right.png (as example) it gives me the 404 error as it can't find the file, but the file is actually there. What is potentially wrong? UPDATE: Here's the error log that I was able to pull out: 2011/02/27 05:53:29 [error] 18679#0: *225 open() "/usr/local/nginx/html/phpMyAdmin/js/mooRainbow/mooRainbow.css" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/js/mooRainbow/mooRainbow.css HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *226 open() "/usr/local/nginx/html/phpMyAdmin/print.css" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/print.css HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *228 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/logo_right.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/logo_right.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *223 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/b_help.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/b_help.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *227 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/s_warn.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/s_warn.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:53:29 [error] 18679#0: *227 open() "/usr/local/nginx/html/phpMyAdmin/favicon.ico" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/favicon.ico HTTP/1.1", host: "50.56.81.42" 2011/02/27 05:54:39 [error] 18679#0: *237 open() "/usr/local/nginx/html/phpMyAdmin/print.css" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/print.css HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *235 open() "/usr/local/nginx/html/phpMyAdmin/js/mooRainbow/mooRainbow.css" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/js/mooRainbow/mooRainbow.css HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *238 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/logo_right.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/logo_right.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *239 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/b_help.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/b_help.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *233 open() "/usr/local/nginx/html/phpMyAdmin/themes/original/img/s_warn.png" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/themes/original/img/s_warn.png HTTP/1.1", host: "50.56.81.42", referrer: "http://50.56.81.42/phpMyAdmin/main.php" 2011/02/27 05:54:39 [error] 18679#0: *233 open() "/usr/local/nginx/html/phpMyAdmin/favicon.ico" failed (2: No such file or directory), client: 70.176.18.156, server: localhost, request: "GET /phpMyAdmin/favicon.ico HTTP/1.1", host: "50.56.81.42" Here's my nginx.conf file, in case I am missing something: #user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; #log_format main '$remote_addr - $remote_user [$time_local] "$request" ' # '$status $body_bytes_sent "$http_referer" ' # '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; server { listen 80; server_name localhost; #charset koi8-r; #access_log logs/host.access.log main; location / { root html; index index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.(js|css|png|jpg|jpeg|gif|ico|html)$ { expires max; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root /usr/share/nginx/html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html$fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one location ~ /\.ht { deny all; } } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_timeout 5m; # ssl_protocols SSLv2 SSLv3 TLSv1; # ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} } What does this mean? It can't pull out the .css, etc....

    Read the article

  • Can't get an IBM xSeries 345 server to load Windows Server 2003 using ServerGuide utility

    - by Kyle Noland
    I have a client that has an IBM xSeries 345 eServer. Per the IBM support website, I have downloaded the ServerGuide Setup 7.4.17 installation ISO and burned a bootable CD. The CD boots fine and loads the utility. I walk through the following screens without any issue: Set the date and Time Detect the IBM ServeRAID card and install the latest firmware Clear the hard disks Set up the RAID array The next step is format the NOS partition. I select my partition size and the utility goes through the following steps: Creating NOS partition Formatting NOS partition (NTFS) Copying W32 files The copying W32 files takes about 10 minutes. I see the CD drive and disks working hard. When the copying is complete, I'm taken to a blank page just NOS Partitioning at the top. At the bottom of the screen are the familiar Back and Exit buttons. I see the place where the Next button should be, and if I click on it I can tell there is something there, but the space is empty. No button is displayed and clicking the empty spot doesn't ever take me to the next screen. I can't load the OS until I get past this part. I have already tried: Burning multiple copies and versions of the ServerGuide CD Letting the final screen just sit there over the weekend thinking it might advance after syncing the drives or something Has anybody else seen this? I'm really at a loss here. EDIT: I found another person who has the exact same problem as me: http://www.ibm.com/developerworks/forums/thread.jspa?messageID=14451763

    Read the article

  • Brother Printer not picking up A5 size paper

    - by Mirage
    I have Brother HL 5040D printer . I want to print some stuff on A5 size. I have done setting on MS word. There is small tray in Brother Printer manin tray where i can put any samll paper and then move the clamps so that it fits the paper. But when i give print command the printer tries to pick up paper but is unable to do so. Then it gave paper light means it can't load the paper. What should i do

    Read the article

  • Is there any way to customize the Windows 7 taskbar auto-hide behavior? Delay activation? Timer?

    - by calbar
    I'm becoming increasingly frustrated with the way Windows 7 handles showing a hidden taskbar. It's incredibly over-eager to pop out and obscure what I'm really trying to interact with, requiring me to move the mouse away, wait for it to auto-hide again, then resume what I was doing but more deliberately. After closely examining the behavior, it appears that a hidden taskbar "peeks out" from the edge by 2 or 3 pixels, and slowly moving your mouse into this area activates it; you don't even need to touch the edge of the screen. I would love it if there was a way to customize or change this behavior. Ideally, the taskbar would only pop out if you are actively "pushing" the edge of the screen it is hidden on. So activation only occurs once you've reached the screens edge and continue to move the mouse past a customizable threshold. Alternatively, a simple activation delay would suffice as well. So only if the mouse remains in that 2-3 pixel area (a.k.a. on the taskbar) for greater than a customizable amount of time does it pop out again. This would only be a fraction of a second. Often times the cursor simply "careens" off the edge of the screen while trying to focus on something nearby. Anyway, if there are any registry settings or utilities that can achieve either of these effects, that would be great! Thanks for your help.

    Read the article

  • Delay between printing via lp in opensuse

    - by adamweeks
    I am experiencing a 10-15 second delay when printing multiple documents to a barcode printer in opensuse. I have had the same setup on other systems with older versions of opensuse without any issue. The setup is as follows: The print queue is setup as a "generic with driver Raw Queue". The files being sent down to the printers are simple text files with the lp command: lp -dprinter1 /path/file The printer is a JetDirect compatible device (Intermec brand) with a standard 9100 port socket setup. If I send a multi-page document to the printer, it will print nonstop the multiple pages. If I send 2 or more text files down via separate "lp" commands, the delay will be there between each printout. I've tried multiple different printers and they all experience the same issue.

    Read the article

  • How to modify PATH variable for X11 during log-in?

    - by user1028435
    Original question is here: Overwriting "Print Screen" actions in linux without administrative rights. Decided to revise my question, based on what I learned there: Essentially, my problem is that I am working on some lab computers (read: no administrative rights) that, if I log in, I need to change the PATH variable as X11 starts. The reason is that I need to change the PATH variable at this time, as opposed to later, is that the Print Screen command seems to "bind" during login (forgive my bad explanation of this). You can see in the work-around I listed in the previous section, that I can make it work by starting a new X, but I was wondering if it is possible to change upon login. Any ideas?

    Read the article

  • Printer ports missing from network printers, Windows 7 laptops

    - by pigeon
    Have an odd issue where users take their laptops home and back into the office with network printers that get mapped via a login script but fail to print. After tracking down a user with this problem I found that the print driver had no ports available to it. We've mapped network printers for this site all the time but only since the introduction of the Konica Minolta C220 Bizhub has this issue cropped up. The issue occurs with Windows 7 users and it takes them 2 /3 reboots to have the ports recreated. Should I be looking at the server for this or at the Windows 7 machines?

    Read the article

  • PDF problems with Evince on Ubuntu

    - by ILMV
    One of my collegues is trying to print a PDF that our designer has sent him, created using Adobe InDesign CS4 (6.0.4). When he opens it up using Evince (version 2.28 on Ubuntu 9.10 thin client) it displays exactly how we expect it to, however when he prints it's not rendering correctly, for example: Missing one logo, the other dozen display perfectly Missing a white box with 30% opacity (without this the blue text sits on a light blue background) The dotted border of a box is screwed up (missing dots in the corners, but fine on the straights) Finally the font quality is slightly poorer than a print out we've done on a working machine. I have tried it on my Ubuntu dev box (Evince version 2.22 on Ubuntu 8.04 server) and it displays and prints perfectly. Can anyone offer an explanation as to why this might be happening, I find it hard to understand how an older version of Evince is displaying it better than a newer version. Thanks! EDIT Just for anyone surfing in, it's likely yo be a CUPS problem on our server, cheers ;-)

    Read the article

  • Why do Finder and du report different file size?

    - by flipdoubt
    I am writing a geektool 3 script to show the size of a particular VMware Fusion virtual machine. Get Info in Finder says the file is "52.91 GB". I run the following du command to get the file size: > du -hs ~/Documents/Virtual\ Machines.localized/MY-PRECIOUS-7.vmwarevm | awk '{print $1}' This du -hs command returns the file size as "49G". What accounts for the difference from what Finder reports? Alternatively, I have tried replacing the -s option with the -d option like so: du -hd ~/Documents/Virtual\ Machines.localized/MY-PRECIOUS-7.vmwarevm | awk '{print $1}' This du -hd command returns the file size as "59G". What accounts for the difference between Finder, du -hd, and du -hs? Also, this du -hd command produces no output in geektool 3. What gives?

    Read the article

  • Re-deploy Reports from SCOM 2007 R2 Management Packs

    - by Gabriel Guimarães
    I've migrated Reporting Services on a SCOM 2007 R2 install, and noticed that the reports have not being copied. I can create a new report, but the ones I've had because of the management packs are gone. I've tried re-applying the Management Packs however it doesn't re-deploy them and when I try to access for example: Monitoring - Microsoft Windows Print Server - Microsoft Windows Server 2000 and 2003 Print Services - State View - select any item and click Alerts on the right menu. I get the following error: Date: 12/24/2010 12:40:35 PM Application: System Center Operations Manager 2007 R2 Application Version: 6.1.7221.0 Severity: Error Message: Cannot initialize report. Microsoft.Reporting.WinForms.ReportServerException: The item '/Microsoft.SystemCenter.DataWarehouse.Report.Library/Microsoft.SystemCenter.DataWarehouse.Report.Alert' cannot be found. (rsItemNotFound) at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo() at Microsoft.Reporting.WinForms.ServerReport.GetParameters() at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport) at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args) The report doesn't exist on the reporting services side. how do I re-deploy this reports? Thanks in advance.

    Read the article

  • HP OfficeJet 5600 w/ Dlink DPR1260 not printing except from Notepad

    - by joelarson
    I have an OfficeJet5600 attached to a Dlink DPR1260 wireless print router. It has worked great for a long time. Today we had a power outage and the thing was inaccessible. I reset the DPR1260 and reinstalled drivers and soforth. I can now print from Notepad, but not from any Office programs, IE, or Chrome. I have toggled on and off many settings such as spooling/not spooling, etc. Nothing has helped. Any ideas? I have Windows Vista.

    Read the article

  • Custom built accounts package running on windows vista , printer selection box not now appearing

    - by liam hester
    This package has a printer function for documents which always brought up the printer selection box from which one picked the appropiate printer. Now recently,almost certainly as a result of windows updates, when I select PRINT nothing happens. The printer is working fine, and indeed a 'direct print' option to the default printer which is a matrix printer works fine, as it does not invoke the printer selection process. Does anyone know if there is a particular setting which might be causing this to happen. It works fine still on all previous windows versions XP etc, but will not work on Vista or later versions. Or is there a program code fix that anyone could suggest. Many thanks Liam

    Read the article

  • Ubuntu 10.04 Server on Hyper-V Server R2 has sluggish install and command line

    - by Paul Hobart
    I've installed Ubuntu Server 10.04 (64 bit) on a Hyper-V Server R2. I've encountered two issues that I think are related: Very slow install Very slow command prompt The text-mode installer goes through a series of text-based prompt windows. It takes 7-10 seconds for each of these windows to draw on the screen. The end result is that every time I answer a prompt and hit enter I wait for 15 seconds while the screen redraws line by line. I can literally see each line of text being drawn (like the old 300 baud modems days). Once done installing, scrolling on the command line is super slow. For instance, if a simple command, like "ls", causes the screen to scroll, it will scroll very slowly. This happens on a fresh install. The server functions as a LAMP server and an OpenSSH server, but that's it (I don't even have any Virtual Hosts set up yet). AND this only happens on the Virtual Machine console. I access the console through Hyper-V Manager and don't have this problem on any of my other Virtual Machines. Also, this problem does NOT happen when accessing a shell through OpenSSH. How can I improve this performance issue?

    Read the article

  • Laptop recommendation - Portable Gaming

    - by ivan
    So, I'm looking for a new laptop (http://superuser.com/questions/116869/toshiba-satellite-u500-totally-damaged-lcd). My requirements for a new Laptop are: -good keyboard(illuminated) and touchpad (multi-media keys included, should be better than toshiba u500) -good graphics card, with system rating of 6.3 and up for gaming graphics (my Toshiba U500 has 6.3). I used to run some heavy games on my Toshiba U500 with ATI Mobility Radeon 4570 with 512 mb VRAM but the framerates are not that nice on high settings. -Decent CPU but I think all new Core i3, i5, i7 can run most of recent resource intensive games (My Toshiba U500 has a Core 2 Duo T6500, 2.13 Ghz) I'm also looking for a long-term reliability, good sound quality, lots of fast RAM of-course(4GB DDR3 - 1066Mhz and up) and a clear looking LED screen with a decent resolution. (I can accomodate a laptop with screen size of 13-inch upto 15.6 inch, and I don't want it to be heavy because I might be taking it outdoors) I'm actually impressed when I saw HP Pavilion DV6t but the screen resolution seems to be a little too small for 15.6 inch. The Pavilion DV3 are also good but I want to know if there other options. Looking for some opinions.. Thanks. :D

    Read the article

  • Nano suddenly putting in weird characters when I type

    - by Cocorico
    I am using a shell and editing a file in nano (similar to pico). A short while ago, it started doing this thing where if I type: $query = "select" * from topics where id='' "; and then I hit Backspace and try to stick the letter 'a' into the id='' part, it changes it to: $query = "select * from koala_topics where id='a='' "; and the cursor jumps around to a few spaces before. Also if I type print At the start of a new line, and then I think "Oh I should have added a tab" and I go back and try to add a tab, it adds a tab AND 2 spaces, and if I put the cursor through the word print, it turns into printnt. Some other weird things have happened too. I uninstalled nano using yum (which is how I installed it), and then re-installed it, thinking that would get me clean preferences (in case that was the problem) but it doesn't fix it.

    Read the article

  • Saving ink when printing?

    - by Walkerneo
    I need a map of the SMC campus, but I'm really sick of running out of ink after printing one thing and then having to pay ridiculous sums of money to buy more ink. The map is here: http://www.smc.edu/campusmap/images/SMC-2D-Map_12-Clr_9-10_crop.jpg I would print in black and white, but I'm wondering if there are any chrome or photoshop extensions, or even websites that transform the image into something more ink-conservative. For example, I don't need the buildings to be a solid color, or the roads to be gray, so it would be a tremendous waste of ink to print it as is. Anyone know anything like I'm talking about?

    Read the article

  • Changing dual-monitor settings without closing the laptop lid on OS X

    - by hekevintran
    I have a Unibody MacBook hooked up to an external display. By default when I boot up, the system will go to dual-monitor mode. I want to use only the external display. The Apple supplied solution to this problem is to close the lid of the laptop which puts the machine into sleep mode and then move the mouse around to wake it up again. Because the machine is being woken up with the lid closed, when the displays are detected the system finds only the external. After the system is functional again, you can open the lid if you want and the laptop screen will be non-functional until you either tell the system to detect displays from the system preferences or you turn off the external display. Every time I want to use only the external display, I must reach my hand over to close the lid, wait for the machine to sleep, jigger the mouse, wait for the machine to wake up, and finally open the lid again because I don't want the machine to overheat. I feel that this is very stupid to have to do. Why is there no button or menu option that says "don't use this screen"? Is there any third-party software way to change the screen setup that does not involve physically closing the lid and playing a game of "are you sleeping" in order to switch such a simple software setting? We are in the 21st Century and honestly this is childish.

    Read the article

  • Can't get an IBM xSeries 345 server to load Windows Server 2003 using ServerGuide utility

    - by Kyle Noland
    I have a client that has an IBM xSeries 345 eServer. Per the IBM support website, I have downloaded the ServerGuide Setup 7.4.17 installation ISO and burned a bootable CD. The CD boots fine and loads the utility. I walk through the following screens without any issue: Set the date and Time Detect the IBM ServeRAID card and install the latest firmware Clear the hard disks Set up the RAID array The next step is format the NOS partition. I select my partition size and the utility goes through the following steps: Creating NOS partition Formatting NOS partition (NTFS) Copying W32 files The copying W32 files takes about 10 minutes. I see the CD drive and disks working hard. When the copying is complete, I'm taken to a blank page just NOS Partitioning at the top. At the bottom of the screen are the familiar Back and Exit buttons. I see the place where the Next button should be, and if I click on it I can tell there is something there, but the space is empty. No button is displayed and clicking the empty spot doesn't ever take me to the next screen. I can't load the OS until I get past this part. I have already tried: Burning multiple copies and versions of the ServerGuide CD Letting the final screen just sit there over the weekend thinking it might advance after syncing the drives or something Has anybody else seen this? I'm really at a loss here.

    Read the article

  • Graphics and USB devices freezing soon after OS loads

    - by Andrew
    I run Ubuntu/Windows dual boot. Last night I started the upgrade to Ubuntu 12.04, and my computer has not worked since in either Windows or Ubuntu. Here's what I got when I rebooted after the upgrade, and continue to get every time I boot: Gets to GRUB screen OK. Choose Ubuntu - black screen or crazy purple lines. At first I assumed something went wrong with the upgrade (often happens). Choose Windows - works fine, I log in, but soon after that the graphics freeze (sometimes with purple artifacts). The keyboard and mouse (both USB) also lose power at the same instant, and none of the USB ports have power to them. This happens sooner or later every time I boot. Update: the HDD also appears to lose power at the same point. I have tried a live CD, but my computer refuses to boot any CD even after disabling all other boot options in the BIOS. I have disconnected everything except keyboard, mouse, graphics card with one monitor, one RAM sick and HDD; no change. I also took the little battery out to reset CMOS. I am pretty sure no matter how wrong the Ubuntu upgrade went, it wouldn't cause the above symptoms in Windows. So the only explanation I can think of is that a hardware failure occurred at the same time. Some possible causes of this I can think of are: A couple of days before this, I added a third screen (which worked fine). About a week before, my house lost power in a storm (no ill effects over the past few days though). What can I do, other than buy a new motherboard/CPU and hope it works? Unfortunately I don't have another box to swap parts into to test at the moment.

    Read the article

  • Re-deploy Reports on SCOM Management Packs

    - by Gabriel Guimarães
    I've migrated Reporting Services on a SCOM 2007 R2 install, and noticed that the reports have not being copied. I can create a new report, but the ones I've had because of the management packs are gone. I've tried re-applying the Management Packs however it doesn't re-deploy them and when I try to access for example: Monitoring - Microsoft Windows Print Server - Microsoft Windows Server 2000 and 2003 Print Services - State View - select any item and click Alerts on the right menu. I get the following error: Date: 12/24/2010 12:40:35 PM Application: System Center Operations Manager 2007 R2 Application Version: 6.1.7221.0 Severity: Error Message: Cannot initialize report. Microsoft.Reporting.WinForms.ReportServerException: The item '/Microsoft.SystemCenter.DataWarehouse.Report.Library/Microsoft.SystemCenter.DataWarehouse.Report.Alert' cannot be found. (rsItemNotFound) at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo() at Microsoft.Reporting.WinForms.ServerReport.GetParameters() at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport) at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args) The report doesn't exist on the reporting services side. how do I re-deploy this reports? Thanks in advance.

    Read the article

  • Find out which task is generating a lot of context switches on linux

    - by Gaks
    According to vmstat, my Linux server (2xCore2 Duo 2.5 GHz) is constantly doing around 20k context switches per second. # vmstat 3 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 2 0 7292 249472 82340 2291972 0 0 0 0 0 0 7 13 79 0 0 0 7292 251808 82344 2291968 0 0 0 184 24 20090 1 1 99 0 0 0 7292 251876 82344 2291968 0 0 0 83 17 20157 1 0 99 0 0 0 7292 251876 82344 2291968 0 0 0 73 12 20116 1 0 99 0 ... but uptime shows small load: load average: 0.01, 0.02, 0.01 and top doesn't show any process with high %CPU usage. How do I find out what exactly is generating those context switches? Which process/thread? I tried to analyze pidstat output: # pidstat -w 10 1 12:39:13 PID cswch/s nvcswch/s Command 12:39:23 1 0.20 0.00 init 12:39:23 4 0.20 0.00 ksoftirqd/0 12:39:23 7 1.60 0.00 events/0 12:39:23 8 1.50 0.00 events/1 12:39:23 89 0.50 0.00 kblockd/0 12:39:23 90 0.30 0.00 kblockd/1 12:39:23 995 0.40 0.00 kirqd 12:39:23 997 0.60 0.00 kjournald 12:39:23 1146 0.20 0.00 svscan 12:39:23 2162 5.00 0.00 kjournald 12:39:23 2526 0.20 2.00 postgres 12:39:23 2530 1.00 0.30 postgres 12:39:23 2534 5.00 3.20 postgres 12:39:23 2536 1.40 1.70 postgres 12:39:23 12061 10.59 0.90 postgres 12:39:23 14442 1.50 2.20 postgres 12:39:23 15416 0.20 0.00 monitor 12:39:23 17289 0.10 0.00 syslogd 12:39:23 21776 0.40 0.30 postgres 12:39:23 23638 0.10 0.00 screen 12:39:23 25153 1.00 0.00 sshd 12:39:23 25185 86.61 0.00 daemon1 12:39:23 25190 12.19 35.86 postgres 12:39:23 25295 2.00 0.00 screen 12:39:23 25743 9.99 0.00 daemon2 12:39:23 25747 1.10 3.00 postgres 12:39:23 26968 5.09 0.80 postgres 12:39:23 26969 5.00 0.00 postgres 12:39:23 26970 1.10 0.20 postgres 12:39:23 26971 17.98 1.80 postgres 12:39:23 27607 0.90 0.40 postgres 12:39:23 29338 4.30 0.00 screen 12:39:23 31247 4.10 23.58 postgres 12:39:23 31249 82.92 34.77 postgres 12:39:23 31484 0.20 0.00 pdflush 12:39:23 32097 0.10 0.00 pidstat Looks like some postgresql tasks are doing 10 context swiches per second, but it doesn't all sum up to 20k anyway. Any idea how to dig a little deeper for an answer?

    Read the article

  • Ubuntu xrandr rotate issue

    - by user83544
    I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

    Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >