function module - Page 298

Is there any difference using {} pair or () pair when define function-like macro in C?

- by solotim

For example: #define FOO(x) (printf(x)) and #define FOO(x) {printf(x)} It seems that both are viable for preprocessing, but which is better?

C++: Syntax for map where Data type is function?

In C#, what I want would look something like this: IDictionary<string, action()> dict = new Dictionary<string, action()>(); How do I do this in C++? This gives compiler errors: map<string, void()> exercises;

Read the article

Returning a value from a function after an elapsed amount of time?

- by Achilles

I have a web service in ASP.NET being called by a time-sensitive process. If the web service takes longer than N seconds to run I want to return from the call so the time sensitive operation can continue. Is this possible and if so what is the code for this?

Read the article

What is the purpose of a zip function (as in Python or C# 4.0) ?

- by Cheeso

Someone asked How to do Python’s zip in C#?... ...which leads me to ask, what good is zip? In what scenarios do I need this? Is it really so foundational that I need this in the base class library?

Read the article

Replacing jQuery.live() with jQuery.on()

- by Rick Strahl

jQuery 1.9 and 1.10 have introduced a host of changes, but for the most part these changes are mostly transparent to existing application usage of jQuery. After spending some time last week with a few of my projects and going through them with a specific eye for jQuery failures I found that for the most part there wasn't a big issue. The vast majority of code continues to run just fine with either 1.9 or 1.10 (which are supposed to be in sync but with 1.10 removing support for legacy Internet Explorer pre-9.0 versions). However, one particular change in the new versions has caused me quite a bit of update trouble, is the removal of the jQuery.live() function. This is my own fault I suppose - .live() has been deprecated for a while, but with 1.9 and later it was finally removed altogether from jQuery. In the past I had quite a bit of jQuery code that used .live() and it's one of the things that's holding back my upgrade process, although I'm slowly cleaning up my code and switching to the .on() function as the replacement. jQuery.live() jQuery.live() was introduced a long time ago to simplify handling events on matched elements that exist currently on the document and those that are are added in the future and also match the selector. jQuery uses event bubbling, special event binding, plus some magic using meta data attached to a parent level element to check and see if the original target event element matches the selected selected elements (for more info see Elijah Manor's comment below). An Example Assume a list of items like the following in HTML for example and further assume that the items in this list can be appended to at a later point. In this app there's a smallish initial list that loads to start, and as the user scrolls towards the end of the initial small list more items are loaded dynamically and added to the list.<div id="PostItemContainer" class="scrollbox"> <div class="postitem" data-id="4z6qhomm"> <div class="post-icon"></div> <div class="postitemheader"><a href="show/4z6qhomm" target="Content">1999 Buick Century For Sale!</a></div> <div class="postitemprice rightalign">$ 3,500 O.B.O.</div> <div class="smalltext leftalign">Jun. 07 @ 1:06am</div> <div class="post-byline">- Vehicles - Automobiles</div> </div> <div class="postitem" data-id="2jtvuu17"> <div class="postitemheader"><a href="show/2jtvuu17" target="Content">Toyota VAN 1987</a></div> <div class="postitemprice rightalign">$950</div> <div class="smalltext leftalign">Jun. 07 @ 12:29am</div> <div class="post-byline">- Vehicles - Automobiles</div> </div> … </div> With the jQuery.live() function you could easily select elements and hook up a click handler like this:$(".postitem").live("click", function() {...}); Simple and perfectly readable. The behavior of the .live handler generally was the same as the corresponding simple event handlers like .click(), except that you have to explicitly name the event instead of using one of the methods. Re-writing with jQuery.on() With .live() removed in 1.9 and later we have to re-write .live() code above with an alternative. The jQuery documentation points you at the .on() or .delegate() functions to update your code. jQuery.on() is a more generic event handler function, and it's what jQuery uses internally to map the high level event functions like .click(),.change() etc. that jQuery exposes. Using jQuery.on() however is not a one to one replacement of the .live() function. While .on() can handle events directly and use the same syntax as .live() did, you'll find if you simply switch out .live() with .on() that events on not-yet existing elements will not fire. IOW, the key feature of .live() is not working. You can use .on() to get the desired effect however, but you have to change the syntax to explicitly handle the event you're interested in on the container and then provide a filter selector to specify which elements you are actually interested in for handling the event for. Sounds more complicated than it is and it's easier to see with an example. For the list above hooking .postitem clicks, using jQuery.on() looks like this:$("#PostItemContainer").on("click", ".postitem", function() {...}); You specify a container that can handle the .click event and then provide a filter selector to find the child elements that trigger the the actual event. So here #PostItemContainer contains many .postitems, whose click events I want to handle. Any container will do including document, but I tend to use the container closest to the elements I actually want to handle the events on to minimize the event bubbling that occurs to capture the event. With this code I get the same behavior as with .live() and now as new .postitem elements are added the click events are always available. Sweet. Here's the full event signature for the .on() function: .on( events [, selector ] [, data ], handler(eventObject) ) Note that the selector is optional - if you omit it you essentially create a simple event handler that handles the event directly on the selected object. The filter/child selector required if you want life-like - uh, .live() like behavior to happen. While it's a bit more verbose than what .live() did, .on() provides the same functionality by being more explicit on what your parent container for trapping events is. .on() is good Practice even for ordinary static Element Lists As a side note, it's a good practice to use jQuery.on() or jQuery.delegate() for events in most cases anyway, using this 'container event trapping' syntax. That's because rather than requiring lots of event handlers on each of the child elements (.postitem in the sample above), there's just one event handler on the container, and only when clicked does jQuery drill down to find the matching filter element and tries to match it to the originating element. In the early days of jQuery I used manually build handlers that did this and manually drilled from the event object into the originalTarget to determine if it's a matching element. With later versions of jQuery the various event functions in jQuery essentially provide this functionality out of the box with functions like .on() and .delegate(). All of this is nothing new, but I thought I'd write this up because I have on a few occasions forgotten what exactly was needed to replace the many .live() function calls that litter my code - especially older code. This will be a nice reminder next time I have a memory blank on this topic. And maybe along the way I've helped one or two of you as well to clean up your .live() code…© Rick Strahl, West Wind Technologies, 2005-2013Posted in jQuery Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Wrapping ASP.NET Client Callbacks

- by Ricardo Peres

Client Callbacks are probably the less known (and I dare say, less loved) of all the AJAX options in ASP.NET, which also include the UpdatePanel, Page Methods and Web Services. The reason for that, I believe, is it’s relative complexity: Get a reference to a JavaScript function; Dynamically register function that calls the above reference; Have a JavaScript handler call the registered function. However, it has some the nice advantage of being self-contained, that is, doesn’t need additional files, such as web services, JavaScript libraries, etc, or static methods declared on a page, or any kind of attributes. So, here’s what I want to do: Have a DOM element which exposes a method that is executed server side, passing it a string and returning a string; Have a server-side event that handles the client-side call; Have two client-side user-supplied callback functions for handling the success and error results. I’m going to develop a custom control without user interface that does the registration of the client JavaScript method as well as a server-side event that can be hooked by some handler on a page. My markup will look like this: 1: <script type="text/javascript"> 1: 2: 3: function onCallbackSuccess(result, context) 4: { 5: } 6: 7: function onCallbackError(error, context) 8: { 9: } 10: </script> 2: <my:CallbackControl runat="server" ID="callback" SendAllData="true" OnCallback="OnCallback"/> The control itself looks like this: 1: public class CallbackControl : Control, ICallbackEventHandler 2: { 3: #region Public constructor 4: public CallbackControl() 5: { 6: this.SendAllData = false; 7: this.Async = true; 8: } 9: #endregion 10: 11: #region Public properties and events 12: public event EventHandler<CallbackEventArgs> Callback; 13: 14: [DefaultValue(true)] 15: public Boolean Async 16: { 17: get; 18: set; 19: } 20: 21: [DefaultValue(false)] 22: public Boolean SendAllData 23: { 24: get; 25: set; 26: } 27: 28: #endregion 29: 30: #region Protected override methods 31: 32: protected override void Render(HtmlTextWriter writer) 33: { 34: writer.AddAttribute(HtmlTextWriterAttribute.Id, this.ClientID); 35: writer.RenderBeginTag(HtmlTextWriterTag.Span); 36: 37: base.Render(writer); 38: 39: writer.RenderEndTag(); 40: } 41: 42: protected override void OnInit(EventArgs e) 43: { 44: String reference = this.Page.ClientScript.GetCallbackEventReference(this, "arg", "onCallbackSuccess", "context", "onCallbackError", this.Async); 45: String script = String.Concat("\ndocument.getElementById('", this.ClientID, "').callback = function(arg, context, onCallbackSuccess, onCallbackError){", ((this.SendAllData == true) ? "__theFormPostCollection.length = 0; __theFormPostData = ''; WebForm_InitCallback(); " : String.Empty), reference, ";};\n"); 46: 47: this.Page.ClientScript.RegisterStartupScript(this.GetType(), String.Concat("callback", this.ClientID), script, true); 48: 49: base.OnInit(e); 50: } 51: 52: #endregion 53: 54: #region Protected virtual methods 55: protected virtual void OnCallback(CallbackEventArgs args) 56: { 57: EventHandler<CallbackEventArgs> handler = this.Callback; 58: 59: if (handler != null) 60: { 61: handler(this, args); 62: } 63: } 64: 65: #endregion 66: 67: #region ICallbackEventHandler Members 68: 69: String ICallbackEventHandler.GetCallbackResult() 70: { 71: CallbackEventArgs args = new CallbackEventArgs(this.Context.Items["Data"] as String); 72: 73: this.OnCallback(args); 74: 75: return (args.Result); 76: } 77: 78: void ICallbackEventHandler.RaiseCallbackEvent(String eventArgument) 79: { 80: this.Context.Items["Data"] = eventArgument; 81: } 82: 83: #endregion 84: } And the event argument class: 1: [Serializable] 2: public class CallbackEventArgs : EventArgs 3: { 4: public CallbackEventArgs(String argument) 5: { 6: this.Argument = argument; 7: this.Result = String.Empty; 8: } 9: 10: public String Argument 11: { 12: get; 13: private set; 14: } 15: 16: public String Result 17: { 18: get; 19: set; 20: } 21: } You will notice two properties on the CallbackControl: Async: indicates if the call should be made asynchronously or synchronously (the default); SendAllData: indicates if the callback call will include the view and control state of all of the controls on the page, so that, on the server side, they will have their properties set when the Callback event is fired. The CallbackEventArgs class exposes two properties: Argument: the read-only argument passed to the client-side function; Result: the result to return to the client-side callback function, set from the Callback event handler. An example of an handler for the Callback event would be: 1: protected void OnCallback(Object sender, CallbackEventArgs e) 2: { 3: e.Result = String.Join(String.Empty, e.Argument.Reverse()); 4: } Finally, in order to fire the Callback event from the client, you only need this: 1: <input type="text" id="input"/> 2: <input type="button" value="Get Result" onclick="document.getElementById('callback').callback(callback(document.getElementById('input').value, 'context', onCallbackSuccess, onCallbackError))"/> The syntax of the callback function is: arg: some string argument; context: some context that will be passed to the callback functions (success or failure); callbackSuccessFunction: some function that will be called when the callback succeeds; callbackFailureFunction: some function that will be called if the callback fails for some reason. Give it a try and see if it helps!

Read the article

SQL SERVER – Weekly Series – Memory Lane – #035

- by Pinal Dave

Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Row Overflow Data Explanation In SQL Server 2005 one table row can contain more than one varchar(8000) fields. One more thing, the exclusions has exclusions also the limit of each individual column max width of 8000 bytes does not apply to varchar(max), nvarchar(max), varbinary(max), text, image or xml data type columns. Comparison Index Fragmentation, Index De-Fragmentation, Index Rebuild – SQL SERVER 2000 and SQL SERVER 2005 An old but like a gold article. Talks about lots of concepts related to Index and the difference from earlier version to the newer version. I strongly suggest that everyone should read this article just to understand how SQL Server has moved forward with the technology. Improvements in TempDB SQL Server 2005 had come up with quite a lots of improvements and this blog post describes them and explains the same. If you ask me what is my the most favorite article from early career. I must point out to this article as when I wrote this one I personally have learned a lot of new things. Recompile All The Stored Procedure on Specific TableI prefer to recompile all the stored procedure on the table, which has faced mass insert or update. sp_recompiles marks stored procedures to recompile when they execute next time. This blog post explains the same with the help of a script. 2008 SQLAuthority Download – SQL Server Cheatsheet You can download and print this cheat sheet and use it for your personal reference. If you have any suggestions, please let me know and I will see if I can update this SQL Server cheat sheet. Difference Between DBMS and RDBMS What is the difference between DBMS and RDBMS? DBMS – Data Base Management System RDBMS – Relational Data Base Management System or Relational DBMS High Availability – Hot Add Memory Hot Add CPU and Hot Add Memory are extremely interesting features of the SQL Server, however, personally I have not witness them heavily used. These features also have few restriction as well. I blogged about them in detail. 2009 Delete Duplicate Rows I have demonstrated in this blog post how one can identify and delete duplicate rows. Interesting Observation of Logon Trigger On All Servers – Solution The question I put forth in my previous article was – In single login why the trigger fires multiple times; it should be fired only once. I received numerous answers in thread as well as in my MVP private news group. Now, let us discuss the answer for the same. The answer is – It happens because multiple SQL Server services are running as well as intellisense is turned on. Blog post demonstrates how we can do the same with the help of SQL scripts. Management Studio New Features I have selected my favorite 5 features and blogged about it. IntelliSense for Query Editing Multi Server Query Query Editor Regions Object Explorer Enhancements Activity Monitors Maximum Number of Index per Table One of the questions I asked in my user group was – What is the maximum number of Index per table? I received lots of answers to this question but only two answers are correct. Let us now take a look at them in this blog post. 2010 Default Statistics on Column – Automatic Statistics on Column The truth is, Statistics can be in a table even though there is no Index in it. If you have the auto- create and/or auto-update Statistics feature turned on for SQL Server database, Statistics will be automatically created on the Column based on a few conditions. Please read my previously posted article, SQL SERVER – When are Statistics Updated – What triggers Statistics to Update, for the specific conditions when Statistics is updated. 2011 T-SQL Scripts to Find Maximum between Two Numbers In this blog post there are two different scripts listed which demonstrates way to find the maximum number between two numbers. I need your help, which one of the script do you think is the most accurate way to find maximum number? Find Details for Statistics of Whole Database – DMV – T-SQL Script I was recently asked is there a single script which can provide all the necessary details about statistics for any database. This question made me write following script. I was initially planning to use sp_helpstats command but I remembered that this is marked to be deprecated in future. 2012 Introduction to Function SIGN SIGN Function is very fundamental function. It will return the value 1, -1 or 0. If your value is negative it will return you negative -1 and if it is positive it will return you positive +1. Let us start with a simple small example. Template Browser – A Very Important and Useful Feature of SSMS Templates are like a quick cheat sheet or quick reference. Templates are available to create objects like databases, tables, views, indexes, stored procedures, triggers, statistics, and functions. Templates are also available for Analysis Services as well. The template scripts contain parameters to help you customize the code. You can Replace Template Parameters dialog box to insert values into the script. An invalid floating point operation occurred If you run any of the above functions they will give you an error related to invalid floating point. Honestly there is no workaround except passing the function appropriate values. SQRT of a negative number will give you result in real numbers which is not supported at this point of time as well LOG of a negative number is not possible (because logarithm is the inverse function of an exponential function and the exponential function is NEVER negative). Validating Spatial Object with IsValidDetailed Function SQL Server 2012 has introduced the new function IsValidDetailed(). This function has made my life very easy. In simple words, this function will check if the spatial object passed is valid or not. If it is valid it will give information that it is valid. If the spatial object is not valid it will return the answer that it is not valid and the reason for the same. This makes it very easy to debug the issue and make the necessary correction. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

ASP.NET WebAPI Security 5: JavaScript Clients

- by Your DisplayName here!

All samples I showed in my last post were in C#. Christian contributed another client sample in some strange language that is supposed to work well in browsers ;) JavaScript client scenarios There are two fundamental scenarios when it comes to JavaScript clients. The most common is probably that the JS code is originating from the same web application that also contains the web APIs. Think a web page that does some AJAX style callbacks to an API that belongs to that web app – Validation, data access etc. come to mind. Single page apps often fall in that category. The good news here is that this scenario just works. The typical course of events is that the user first logs on to the web application – which will result in an authentication cookie of some sort. That cookie will get round-tripped with your AJAX calls and ASP.NET does its magic to establish a client identity context. Since WebAPI inherits the security context from its (web) host, the client identity is also available here. The other fundamental scenario is JavaScript code *not* running in the context of the WebAPI hosting application. This is more or less just like a normal desktop client – either running in the browser, or if you think of Windows 8 Metro style apps as “real” desktop apps. In that scenario we do exactly the same as the samples did in my last post – obtain a token, then use it to call the service. Obtaining a token from IdentityServer’s resource owner credential OAuth2 endpoint could look like this: thinktectureIdentityModel.BrokeredAuthentication = function (stsEndpointAddress, scope) { this.stsEndpointAddress = stsEndpointAddress; this.scope = scope; }; thinktectureIdentityModel.BrokeredAuthentication.prototype = function () { getIdpToken = function (un, pw, callback) { $.ajax({ type: 'POST', cache: false, url: this.stsEndpointAddress, data: { grant_type: "password", username: un, password: pw, scope: this.scope }, success: function (result) { callback(result.access_token); }, error: function (error) { if (error.status == 401) { alert('Unauthorized'); } else { alert('Error calling STS: ' + error.responseText); } } }); }; createAuthenticationHeader = function (token) { var tok = 'IdSrv ' + token; return tok; }; return { getIdpToken: getIdpToken, createAuthenticationHeader: createAuthenticationHeader }; } (); Calling the service with the requested token could look like this: function getIdentityClaimsFromService() { authHeader = authN.createAuthenticationHeader(token); $.ajax({ type: 'GET', cache: false, url: serviceEndpoint, beforeSend: function (req) { req.setRequestHeader('Authorization', authHeader); }, success: function (result) { $.each(result.Claims, function (key, val) { $('#claims').append($('<li>' + val.Value + '</li>')) }); }, error: function (error) { alert('Error: ' + error.responseText); } }); I updated the github repository, you can can play around with the code yourself.

Read the article

CodePlex Daily Summary for Wednesday, November 16, 2011

CodePlex Daily Summary for Wednesday, November 16, 2011Popular ReleasesMVC Controls Toolkit: Mvc Controls Toolkit 1.5.5: Added: Now the DateRanteAttribute accepts complex expressions containing "Now" and "Today" as static minimum and maximum. Menu, MenuFor helpers capable of handling a "currently selected element". The developer can choose between using a standard nested menu based on a standard SimpleMenuItem class or specifying an item template based on a custom class. Added also helpers to build the tree structure containing all data items the menu takes infos from. Improved the pager. Now the developer ...Public Key Infrastructure PowerShell module: PowerShell PKI Module v0.9.2: Installation guide: Use default installation path to install this module for all users To install this module for current user only — use the following path: %MyDocs%\WindowsPowerShell\Modules Note: you MUST uninstall previously installed module versions. Direct upgrade is not supported! Note: at this time PowerShell 3.0 CTP1 is not supported. Release notes for version 0.9.2: updated and corrected help for several commands. added online help for all commands. Get-CertificationAuthorit...Files Name Copier: 1.0.0.1: Files Name Copier is a simple easy to use utility that allows you to drag and drop any number of files onto it. The clipboard will now contain the list of files you just dropped.SQL Monitor - tracking sql server activities: SQLMon 4.1 alpha 3: 1. improved object search, now show previous/next navigation 2. shows server start up time 3. shows process cpu/ioCODE Framework: 4.0.11115.0: Added support for partial views in the WPF framework, as well as a new helper feature that allows hooking commands/actions to all WPF events.Silverlight Toolkit: Windows Phone Toolkit - Nov 2011 (7.1 SDK): This release is coming soon! What's new ListPicker once again works in a ScrollViewer LongListSelector bug fixes around OutOfRange exceptions, wrong ordering of items, grouping issues, and scrolling events. ItemTuple is now refactored to be the public type LongListSelectorItem to provide users better access to the values in selection changed handlers. PerformanceProgressBar binding fix for IsIndeterminate (item 9767 and others) There is no longer a GestureListener dependency with the C...DotNetNuke® Community Edition: 06.01.01: Major Highlights Fixed problem with the core skin object rendering CSS above the other framework inserted files, which caused problems when using core style skin objects Fixed issue with iFrames getting removed when content is saved Fixed issue with the HTML module removing styling and scripts from the content Fixed issue with inserting the link to jquery after the header of the page Security Fixesnone Updated Modules/Providers ModulesHTML version 6.1.0 ProvidersnoneDotNetNuke Performance Settings: 01.00.00: First release of DotNetNuke SQL update queries to set the DNN installation for optimimal performance. Please review and rate this release... (stars are welcome)SCCM Client Actions Tool: SCCM Client Actions Tool v0.8: SCCM Client Actions Tool v0.8 is currently the latest version. It comes with following changes since last version: Added "Wake On LAN" action. WOL.EXE is now included. Added new action "Get all active advertisements" to list all machine based advertisements on remote computers. Added new action "Get all active user advertisements" to list all user based advertisements for logged on users on remote computers. Added config.ini setting "enablePingTest" to control whether ping test is ru...Windows Azure SDK for PHP: Windows Azure SDK for PHP v4.0.4: INSTALLATION Windows Azure SDK for PHP requires no special installation steps. Simply download the SDK, extract it to the folder you would like to keep it in, and add the library directory to your PHP include_path. INSTALLATION VIA PEAR Maarten Balliauw provides an unofficial PEAR channel via http://www.pearplex.net. Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPAzure Or if you've already installed PHPAzure before: pear upgrade p...QuickGraph, Graph Data Structures And Algorithms for .Net: 3.6.61116.0: Portable library build that allows to use QuickGraph in any .NET environment: .net 4.0, silverlight 4.0, WP7, Win8 Metro apps.Devpad: 4.7: Whats new for Devpad 4.7: New export to Rich Text New export to FlowDocument Minor Bug Fix's, improvements and speed upsDesktop Google Reader: 1.4.2: This release remove the like and the broadcast buttons as Google Reader stopped supporting them (no, we don't like this decission...) Additionally and to have at least a small plus: the login window now automaitcally logs you in if you stored username and passwort (no more extra click needed) Finally added WebKit .NET to the about window and removed Awesomium MD5-Hash: 5fccf25a2fb4fecc1dc77ebabc8d3897 SHA-Hash: d44ff788b123bd33596ad1a75f3b9fa74a862fdbRDRemote: Remote Desktop remote configurator V 1.0.0: Remote Desktop remote configurator V 1.0.0Rawr: Rawr 4.2.7: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...VidCoder: 1.2.2: Updated Handbrake core to svn 4344. Fixed the 6-channel discrete mixdown option not appearing for AAC encoders. Added handling for possible exceptions when copying to the clipboard, added retries and message when it fails. Fixed issue with audio bitrate UI not appearing sometimes when switching audio encoders. Added extra checks to protect against reported crashes. Added code to upgrade encoding profiles on old queued items.Media Companion: MC 3.422b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) TV Show Resolutions... Made the TV Shows folder list sorted. Re-visibled 'Manually Add Path' in Root Folders. Sorted list to process during new tv episode search Rebuild Movies now processes thru folders alphabetically Fix for issue #208 - Display Missing Episodes is not popu...XPath Visualizer: XPathVisualizer v1.3 Latest: This is v1.3.0.6 of XpathVisualizer. This is an update release for v1.3. These workitems have been fixed since v1.3.0.5: 7429 7432 7427MSBuild Extension Pack: November 2011: Release Blog Post The MSBuild Extension Pack November 2011 release provides a collection of over 415 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GU...Extensions for Reactive Extensions (Rxx): Rxx 1.2: What's NewRelated Work Items Please read the latest release notes for details about what's new. Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many useful types such as ViewModel, CommandSubject, ListSubject, DictionarySubject, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T> and others. Various interactive labs that illustrate the runtime behavior of the extensio...New Projects#foo MigratorFoo: Migration generator for NHibernate projects with integrated NuGet console commands.Best music production software: Programmers needed to make the perfect open source music production software: I have a well structured creative idea based on the following principle "powerful simplicity"...Bricks: Bricks is a development foundation for different technologyCultiv Jupiter Contact Form: A contact form package for Umbraco v5 (Jupiter)DNN Fan Gate: A simple module for fan gating content in DotNetNukeDobo: DoboDotNetNuke Performance Settings: A set of SQL queries that will change the (Host & Schedule) settings of your DotNetNuke installation for maximal production performance or set it optimal for Development. These queries were used in my presentation on DotNetNuke World 2011.Experiment Manager: This project was developed as a response to the requirements for an experiment manager software for clinical psychology experiments. Feedbook: Feedbook supports any RSS and Atom news feeds, It can also download podcasts saliently and play it within Feedbook. It integrates with Twitter and Google Buzz very well, you can send tweets/post easily and can also subscribe to twitter timelines/buzz feeds. Characters like # & @ also recognize as special keywords, so that you can subscribe to feeds of any on going topic on twitter like #download, #movie or #cricket. http://feedbook.orgFiles Name Copier: Files Name Copier is a simple easy to use utility that allows you to drag and drop any number of files onto it. The clipboard will now contain the list of files you just dropped.Kinban: Kinect + TFS This is a WPF representation of a Kanban board that can be manipulated with the Kinect.MapTeamsPolls: This is an ASP.Net ajax polls user controls. Using ajax and jQuery. This user controls can be used in any ASP.Net 4.0 projects. Use the build script to create Umbraco package for the user controls and the admin page. As a bonus, there is a ruby rake build script for the package.MetroButton with Converter Image SVG2XAML Silverlight: - Control library SL4 with Button Metro Style - Windows application for download and convert SVG to Resource.xaml for silverlightMetroIoc - a simple WinRT IoC container: A WinRT port of the MicroIoc container... MetroIoc is a native WinRT Inversion of Control container, for use in Metro style apps. Check the license for usage rights of this projectMTN Library: .NET library with extensions for LINQ and Entity Framework as well as useful extensions. Contains many extensions, features for display methods using jquery Ajax. Has a proxy to create and use methods with cache as much as in the ajax methods.myDeck: Main goal of this project is to show best practices and patterns for unit testing in Silverlight Technology. It is developed as part of BAThesisNetwork extensions for .net Micro Framework and Gadgeteer: Adds .net Microframework support for - BinaryReader - BinaryWriter Adds a FEZ way for TCP and UDP networking to the Gadgeteer platformNewSunse: this card creating projectOrchard CMS ImageResizer: resize or scale images in orchard simply by url or using the build-in HtmlHelperReportCenter: ReportCenterSharePoint 2010 Extended Lookup Field: This project installs a custom lookup field, which allows the user to choose the item through a SharePoint 2010 popup. Here are the features offered by this field: - high extensibility - high performance when woking with very large lists - small size for new and edit list forms - posibility to specify you own search page - SharePoint 2010 lookup and feel The project is a VS2010 SharePoint 2010 project. Simplicity Framework: Simplicity is a framework to automatic generate dataccess an UI code for crudlstackoverflowstore: Homenaje a stackoverflow.Stoc: Aplicatia Stoc simplifica generarea facturilor si a retelor, gestionand stocul marfii unei firme. Student PAS: Student PAS is a simple webapp for assign tasks for students. It was created with educational purposes. Thus, it is not an serious usable software.System Center 2012 - Operations Manager Managed Module Samples: Sample Visual Studio 2010 projects that illustrate how you can create custom module types for System Center 2012 - Operations Manager. The project contains the C# code for creating data source, write action, probe and condition detection modules and more.Tecnosop: Sistema de facturacion de TecnosopUtilityLibrary.FormControl: FormControlWebRequestFrequencyControl: This project intends to solve the web request frequency control problem. This solution is based on HttpModule and highly configurable. If you need to limit the frequency of requests, you may interest in this.Windows Phone Marketplace Analytics: Libraries (and data) to help you access and analyze the different information provided by the MS marketplace.Windows Troubleshooting Platform Starter Packs: Starter Packs are open source packages based on the Windows Troubleshooting Platform that can be modified by developers to suit their specific needs. Starter Packs are an easy way for developers to create and distribute a Windows Troubleshooting Pack to diagnose computer problems.

Read the article

Controlling the Sizing of the af:messages Dialog

- by Duncan Mills

Over the last day or so a small change in behaviour between 11.1.2.n releases of ADF and earlier versions has come to my attention. This has concerned the default sizing of the dialog that the framework automatically generates to handle the display of JSF messages being handled by the <af:messages> component. Unlike a normal popup, you don't have a physical <af:dialog> or <af:window> to set the sizing on in your page definition, so you're at the mercy of what the framework provides. In this case the framework now defines a fixed 250x250 pixel content area dialog for these messages, which can look a bit weird if the message is either very short, or very long. Unfortunately this is not something that you can control through the skin, instead you have to be a little more creative. Here's the solution I've come up with. Unfortunately, I've not found a supportable way to reset the dialog so as to say just size yourself based on your contents, it is actually possible to do this by tweaking the correct DOM objects, but I wanted to start with a mostly supportable solution that only uses the best practice of working through the ADF client side APIs. The Technique The basic approach I've taken is really very simple. The af:messages dialog is just a normal richDialog object, it just happens to be one that is pre-defined for you with a particular known name "msgDlg" (which hopefully won't change). Knowing this, you can call the accepted APIs to control the content width and height of that dialog, as our meerkat friends would say, "simples" 1 The JavaScript For this example I've defined three JavaScript functions. The first does all the hard work and is designed to be called from server side Java or from a page load event to set the default. The second is a utility function used by the first to validate the values you're about to use for height and width. The final function is one that can be called from the page load event to set an initial default sizing if that's all you need to do. Function resizeDefaultMessageDialog() /** * Function that actually resets the default message dialog sizing. * Note that the width and height supplied define the content area * So the actual physical dialog size will be larger to account for * the chrome containing the header / footer etc. * @param docId Faces component id of the document * @param contentWidth - new content width you need * @param contentHeight - new content height */ function resizeDefaultMessageDialog(docId, contentWidth, contentHeight) { // Warning this value may change from release to release var defMDName = "::msgDlg"; //Find the default messages dialog msgDialogComponent = AdfPage.PAGE.findComponentByAbsoluteId(docId + defMDName); // In your version add a check here to ensure we've found the right object! // Check the new width is supplied and is a positive number, if so apply it. if (dimensionIsValid(contentWidth)){ msgDialogComponent.setContentWidth(contentWidth); } // Check the new height is supplied and is a positive number, if so apply it. if (dimensionIsValid(contentHeight)){ msgDialogComponent.setContentHeight(contentHeight); } } Function dimensionIsValid() /** * Simple function to check that sensible numeric values are * being proposed for a dimension * @param sampleDimension * @return booolean */ function dimensionIsValid(sampleDimension){ return (!isNaN(sampleDimension) && sampleDimension > 0); } Function initializeDefaultMessageDialogSize() /** * This function will re-define the default sizing applied by the framework * in 11.1.2.n versions * It is designed to be called with the document onLoad event */ function initializeDefaultMessageDialogSize(loadEvent){ //get the configuration information var documentId = loadEvent.getSource().getProperty('documentId'); var newWidth = loadEvent.getSource().getProperty('defaultMessageDialogContentWidth'); var newHeight = loadEvent.getSource().getProperty('defaultMessageDialogContentHeight'); resizeDefaultMessageDialog(documentId, newWidth, newHeight); } Wiring in the Functions As usual, the first thing we need to do when using JavaScript with ADF is to define an af:resource in the document metaContainer facet <af:document> .... <f:facet name="metaContainer"> <af:resource type="javascript" source="/resources/js/hackMessagedDialog.js"/> </f:facet> </af:document> This makes the script functions available to call. Next if you want to use the option of defining an initial default size for the dialog you use a combination of <af:clientListener> and <af:clientAttribute> tags like this. <af:document title="MyApp" id="doc1"> <af:clientListener method="initializeDefaultMessageDialogSize" type="load"/> <af:clientAttribute name="documentId" value="doc1"/> <af:clientAttribute name="defaultMessageDialogContentWidth" value="400"/> <af:clientAttribute name="defaultMessageDialogContentHeight" value="150"/> ... Just in Time Dialog Sizing So what happens if you have a variety of messages that you might add and in some cases you need a small dialog and an other cases a large one? Well in that case you can re-size these dialogs just before you submit the message. Here's some example Java code: FacesContext ctx = FacesContext.getCurrentInstance(); //reset the default dialog size for this message ExtendedRenderKitService service = Service.getRenderKitService(ctx, ExtendedRenderKitService.class); service.addScript(ctx, "resizeDefaultMessageDialog('doc1',100,50);"); FacesMessage msg = new FacesMessage("Short message"); msg.setSeverity(FacesMessage.SEVERITY_ERROR); ctx.addMessage(null, msg); So there you have it. This technique should, at least, allow you to control the dialog sizing just enough to stop really objectionable whitespace or scrollbars. 1 Don't worry if you don't get the reference, lest's just say my kids watch too many adverts.

Read the article

Restructuring a large Chrome Extension/WebApp

- by A.M.K

I have a very complex Chrome Extension that has gotten too large to maintain in its current format. I'd like to restructure it, but I'm 15 and this is the first webapp or extension of it's type I've built so I have no idea how to do it. TL;DR: I have a large/complex webapp I'd like to restructure and I don't know how to do it. Should I follow my current restructure plan (below)? Does that sound like a good starting point, or is there a different approach that I'm missing? Should I not do any of the things I listed? While it isn't relevant to the question, the actual code is on Github and the extension is on the webstore. The basic structure is as follows: index.html <html> <head> <link href="css/style.css" rel="stylesheet" />  <link href="css/widgets.css" rel="stylesheet" />  </head> <body class="unloaded">  <div class="tab-container" tabindex="-1">  </div>  <template id="template.toolbar">  </template>   <script type="text/javascript" src="js/plugins.js"></script>  <script type="text/javascript" src="js/widgets.js"></script>  <script type="text/javascript" src="js/script.js"></script> </body> </html> widgets.js (initLog || (window.initLog = [])).push([new Date().getTime(), "A log is kept during page load so performance can be analyzed and errors pinpointed"]); // Widgets are stored in an object and extended (with jQuery, but I'll probably switch to underscore if using Backbone) as necessary var Widgets = { 1: { // Widget ID, this is set here so widgets can be retreived by ID id: 1, // Widget ID again, this is used after the widget object is duplicated and detached size: 3, // Default size, medium in this case order: 1, // Order shown in "store" name: "Weather", // Widget name interval: 300000, // Refresh interval nicename: "weather", // HTML and JS safe widget name sizes: ["tiny", "small", "medium"], // Available widget sizes desc: "Short widget description", settings: [ { // Widget setting specifications stored as an array of objects. These are used to dynamically generate widget setting popups. type: "list", nicename: "location", label: "Location(s)", placeholder: "Enter a location and press Enter" } ], config: { // Widget settings as stored in the tabs object (see script.js for storage information) size: "medium", location: ["San Francisco, CA"] }, data: {}, // Cached widget data stored locally, this lets it work offline customFunc: function(cb) {}, // Widgets can optionally define custom functions in any part of their object refresh: function() {}, // This fetches data from the web and caches it locally in data, then calls render. It gets called after the page is loaded for faster loads render: function() {} // This renders the widget only using information from data, it's called on page load. } }; script.js (initLog || (window.initLog = [])).push([new Date().getTime(), "These are also at the end of every file"]); // Plugins, extends and globals go here. i.e. Number.prototype.pad = .... var iChrome = function(refresh) { // The main iChrome init, called with refresh when refreshing to not re-run libs iChrome.Status.log("Starting page generation"); // From now on iChrome.Status.log is defined, it's used in place of the initLog iChrome.CSS(); // Dynamically generate CSS based on settings iChrome.Tabs(); // This takes the tabs stored in the storage (see fetching below) and renders all columns and widgets as necessary iChrome.Status.log("Tabs rendered"); // These will be omitted further along in this excerpt, but they're used everywhere // Checks for justInstalled => show getting started are run here /* The main init runs the bare minimum required to display the page, this sets all non-visible or instantly need things (such as widget dragging) on a timeout */ iChrome.deferredTimeout = setTimeout(function() { iChrome.deferred(refresh); // Pass refresh along, see above }, 200); }; iChrome.deferred = function(refresh) {}; // This calls modules one after the next in the appropriate order to finish rendering the page iChrome.Search = function() {}; // Modules have a base init function and are camel-cased and capitalized iChrome.Search.submit = function(val) {}; // Methods within modules are camel-cased and not capitalized /* Extension storage is async and fetched at the beginning of plugins.js, it's then stored in a variable that iChrome.Storage processes. The fetcher checks to see if processStorage is defined, if it is it gets called, otherwise settings are left in iChromeConfig */ var processStorage = function() { iChrome.Storage(function() { iChrome.Templates(); // Templates are read from their elements and held in a cache iChrome(); // Init is called }); }; if (typeof iChromeConfig == "object") { processStorage(); } Objectives of the restructure Memory usage: Chrome apparently has a memory leak in extensions, they're trying to fix it but memory still keeps on getting increased every time the page is loaded. The app also uses a lot on its own. Code readability: At this point I can't follow what's being called in the code. While rewriting the code I plan on properly commenting everything. Module interdependence: Right now modules call each other a lot, AFAIK that's not good at all since any change you make to one module could affect countless others. Fault tolerance: There's very little fault tolerance or error handling right now. If a widget is causing the rest of the page to stop rendering the user should at least be able to remove it. Speed is currently not an issue and I'd like to keep it that way. How I think I should do it The restructure should be done using Backbone.js and events that call modules (i.e. on storage.loaded = init). Modules should each go in their own file, I'm thinking there should be a set of core files that all modules can rely on and call directly and everything else should be event based. Widget structure should be kept largely the same, but maybe they should also be split into their own files. AFAIK you can't load all templates in a folder, therefore they need to stay inline. Grunt should be used to merge all modules, plugins and widgets into one file. Templates should also all be precompiled. Question: Should I follow my current restructure plan? Does that sound like a good starting point, or is there a different approach that I'm missing? Should I not do any of the things I listed? Do applications written with Backbone tend to be more intensive (memory and speed) than ones written in Vanilla JS? Also, can I expect to improve this with a proper restructure or is my current code about as good as can be expected?

Read the article

Make a lives display in HUD, Flash AS3 (not text!)

- by user40404

I've been searching the internet all day and I can't find the answer I'm looking for. In my HUD I want to use orange dots to represent lives. The user starts off with 5 lives and every time they die, I want a dot to be removed. Pretty straight forward. So far my idea is to make a movie clip that has the five dots in a line. There would be 5 frames on the timeline (because after the last life it goes to a game over screen right away). I would have a variable set up to store the number of lives and a function to keep track of lives. So every hit of an obstacle would result in livesCounter--;. Then I would set up something like this: switch(livesCounter){ case 5: livesDisplay.gotoAndPlay(1); break; case 4: livesDisplay.gotoAndPlay(2); break; case 3: livesDisplay.gotoAndPlay(3); break; case 2: livesDisplay.gotoAndPlay(4); break; case 1: livesDisplay.gotoAndPlay(5); break; } I feel like there has to be an easier way to do this where I could just have a movie clip of a single orange dot that I could replicate across an x value based on the number of lives. Maybe the dots would be stored in an array? When the user loses a life, a dot on the right end of the line is removed. So in the end the counter would look like this: * * * * * * * * * * * * * * * (last life lost results in the end game screen) EDIT: code based on suggestions by Zhafur and Arthur Wolf White package { import flash.display.MovieClip; import flash.events.*; import flash.ui.Multitouch; import flash.ui.MultitouchInputMode; import flash.display.Sprite; import flash.text.*; import flash.utils.getTimer; public class CollisionMouse extends MovieClip{ public var mySprite:Sprite = new Sprite(); Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT; public var replacement:newSprite = new newSprite; public var score:int = 0; public var obstScore:int = -50; public var targetScore:int = 200; public var startTime:uint = 0; public var gameTime:uint; public var pauseScreen:PauseScreen = new PauseScreen(); public var hitTarget:Boolean = false; public var hitObj:Boolean = false; public var currLevel:Number = 1; public var heroLives:int = 5; public var life:Sprite; public function CollisionMouse() { mySprite.graphics.beginFill(0xff0000); mySprite.graphics.drawRect(0,0,40,40); addChild(mySprite); mySprite.x = 200; mySprite.y = 200; pauseScreen.x = stage.width/2; pauseScreen.y = stage.height/2; life = new Sprite(); life.x = 210; stage.addEventListener(MouseEvent.MOUSE_MOVE,followMouse); /*mySprite.addEventListener(TouchEvent.TOUCH_END, onTouchEnd);*/ //checkLevel(); timeCheck(); trackLives(); } public function timeCheck(){ addEventListener(Event.ENTER_FRAME, showTime); } public function showTime(e:Event) { gameTime = getTimer()-startTime; rm1_mc.timeDisplay.text = clockTime(gameTime); rm1_mc.livesDisplay.text = String(heroLives); } public function clockTime(ms:int) { var seconds:int = Math.floor(ms/1000); var minutes:int = Math.floor(seconds/60); seconds -= minutes*60; var timeString:String = minutes+":"+String(seconds+100).substr(1,2); return timeString; } public function trackLives(){ for(var i:int=0; i<heroLives; i++){ life.graphics.lineStyle(1, 0xff9900); life.graphics.beginFill(0xff9900, 1); life.graphics.drawCircle(i*15, 45, 6); life.graphics.endFill(); addChild(life); } } function followMouse(e:MouseEvent){ mySprite.x=mouseX; mySprite.y=mouseY; trackCollisions(); } function trackCollisions(){ if(mySprite.hitTestObject(rm1_mc.obst1) || mySprite.hitTestObject(rm1_mc.obst2)){ hitObjects(); } else if(mySprite.hitTestObject(rm1_mc.target_mc)){ hitTarg(); } } function hitObjects(){ addChild(replacement); mySprite.x ^= replacement.x; replacement.x ^= mySprite.x; mySprite.x ^= replacement.x; mySprite.y ^= replacement.y; replacement.y ^= mySprite.y; mySprite.y ^= replacement.y; stage.removeEventListener(MouseEvent.MOUSE_MOVE, followMouse); removeChild(mySprite); hitObj = true; checkScore(); } function hitTarg(){ addChild(replacement); mySprite.x ^= replacement.x; replacement.x ^= mySprite.x; mySprite.x ^= replacement.x; mySprite.y ^= replacement.y; replacement.y ^= mySprite.y; mySprite.y ^= replacement.y; stage.removeEventListener(MouseEvent.MOUSE_MOVE, followMouse); removeEventListener(Event.ENTER_FRAME, showTime); removeChild(mySprite); hitTarget = true; currLevel++; checkScore(); } function checkScore(){ if(hitObj){ score += obstScore; heroLives--; removeChild(life); } else if(hitTarget){ score += targetScore; } rm1_mc.scoreDisplay.text = String(score); rm1_mc.livesDisplay.text = String(heroLives); trackLives(); } } }

Read the article

GeoIP and Nginx

- by JavierMartinez

I have a nginx with geoip, but it is not working rightly. The issue is the next: Nginx are getting geodata from $_SERVER['REMOTE_ADDR'] instead of $_SERVER['HTTP_X_HAPROXY_IP'], which have the real client ip. So, the reported geodata belongs to my server ip instead of client ip. Does anybody where could be the error to fix it? Nginx version and compiled modules: nginx -V nginx version: nginx/1.2.3 TLS SNI support enabled configure arguments: --prefix=/etc/nginx --conf-path=/etc/nginx/nginx.conf --error-log- path=/var/log/nginx/error.log --http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi --http-log-path=/var/log/nginx/access.log --http-proxy-temp-path=/var/lib/nginx/proxy --http-scgi-temp-path=/var/lib/nginx/scgi --http-uwsgi-temp-path=/var/lib/nginx/uwsgi --lock-path=/var/lock/nginx.lock --pid-path=/var/run/nginx.pid --with-pcre-jit --with-debug --with-file-aio --with-http_addition_module --with-http_dav_module --with-http_geoip_module --with-http_gzip_static_module --with-http_image_filter_module --with-http_realip_module --with-http_secure_link_module --with-http_stub_status_module --with-http_ssl_module --with-http_sub_module --with-http_xslt_module --with-ipv6 --with-sha1=/usr/include/openssl --with-md5=/usr/include/openssl --with-mail --with-mail_ssl_module --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-auth-pam --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-echo --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-upstream-fair --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-dav-ext-module --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-syslog --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-cache-purge nginx site conf (frontend machine) server { root /var/www/storage; server_name ~^.*(\.)?mydomain.com$; if ($host ~ ^(.*)\.mydomain\.com$) { set $new_host $1.mydomain.com; } if ($host !~ ^(.*)\.mydomain\.com$) { set $new_host www.mydomain.com; } add_header Staging true; real_ip_header X-HAProxy-IP; set_real_ip_from 10.5.0.10/32; location /files { expires 30d; if ($uri !~ ^/files/([a-fA-F0-9]+)_(220|45)\.jpg$) { return 403; } rewrite ^/files/([a-fA-F0-9][a-fA-F0-9])([a-fA-F0-9][a-fA-F0-9])([a-fA-F0-9][a-fA-F0-9])([a-fA-F0-9][a-fA-F0-9])([a-fA-F0-9]+)_(220|45)\.jpg$ /files/$1/$2/$3/$4/$1$2$3$4$5_$6.jpg break; try_files $uri @to_backend; } location /assets { if ($uri ~ ^/assets/r([a-zA-Z0-9]+[^/])(/(css|js|fonts)/.*)) { rewrite ^/assets/r([a-zA-Z0-9]+[^/])/(css|js|fonts)/(.*)$ /assets/$2/$3 break; } try_files $uri @to_backend; } location / { proxy_set_header Host $new_host; proxy_set_header X-HAProxy-IP $remote_addr; proxy_pass http://10.5.0.10:8080; } location @to_backend { proxy_set_header Host $new_host; proxy_pass http://10.5.0.10:8080; } } nginx.conf (backend machine) http{ ... ## # GeoIP Config ## geoip_country /etc/nginx/geoip/GeoIP.dat; # the country IP database geoip_city /etc/nginx/geoip/GeoLiteCity.dat; # the city IP database ... } fastcgi_params (backend machine) ### SET GEOIP Variables ### fastcgi_param GEOIP_COUNTRY_CODE $geoip_country_code; fastcgi_param GEOIP_COUNTRY_CODE3 $geoip_country_code3; fastcgi_param GEOIP_COUNTRY_NAME $geoip_country_name; fastcgi_param GEOIP_CITY_COUNTRY_CODE $geoip_city_country_code; fastcgi_param GEOIP_CITY_COUNTRY_CODE3 $geoip_city_country_code3; fastcgi_param GEOIP_CITY_COUNTRY_NAME $geoip_city_country_name; fastcgi_param GEOIP_REGION $geoip_region; fastcgi_param GEOIP_CITY $geoip_city; fastcgi_param GEOIP_POSTAL_CODE $geoip_postal_code; fastcgi_param GEOIP_CITY_CONTINENT_CODE $geoip_city_continent_code; fastcgi_param GEOIP_LATITUDE $geoip_latitude; fastcgi_param GEOIP_LONGITUDE $geoip_longitude; haproxy.conf (frontend machine) defaults log global option forwardfor option httpclose mode http retries 3 option redispatch maxconn 4096 contimeout 100000 clitimeout 100000 srvtimeout 100000 listen cluster_webs *:8080 mode http option tcpka option httpchk option httpclose option forwardfor balance roundrobin server backend-stage 10.5.0.11:80 weight 1 $_SERVER dump: http://paste.laravel.com/7dy Where 10.5.0.10 is frontend private ip and 10.5.0.11 backend private ip

Read the article

Cannot Start Nginx Compiled from Source

- by Jason Alan Kennedy

I am trying to compile Nginx from source based on the original compiled Nginx server running on my DigitalOcean server ( Ubuntu-14.04 64x ) but with a few extra modules. I can get everything installed smoothly but I can not get it to start. I am sure the ini is correct because I copied the original source off the current running Nginx server [ Even though I see that Nginx now adds the ini when compiling fron source ]. Below is the [ lengthy process ] that I am performing - add sorry but I wanted to be thorough for those who are in need of the info ]. Because I am a newB to Nginx, I am sure I am missing something or just have it all wrong. If you may look over what I have done and see if you spot anything I need/need to change, I will greatly appreciate it. Thnx! With the original Nginx server still running: I check the current/running Nginx configuration so I can build the new Nginx instance the same but with the added modules: nginx -V # The out-put: configure arguments: --with-cc-opt='-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' --with-ld-opt='-Wl,-Bsymbolic-functions -Wl,-z,relro' --prefix=/usr/share/nginx --conf-path=/etc/nginx/nginx.conf --http-log-path=/var/log/nginx/access.log --error-log-path=/var/log/nginx/error.log --lock-path=/var/lock/nginx.lock --pid-path=/run/nginx.pid --http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi --http-proxy-temp-path=/var/lib/nginx/proxy --http-scgi-temp-path=/var/lib/nginx/scgi --http-uwsgi-temp-path=/var/lib/nginx/uwsgi --with-debug --with-pcre-jit --with-ipv6 --with-http_ssl_module --with-http_stub_status_module --with-http_realip_module --with-http_addition_module --with-http_dav_module --with-http_geoip_module --with-http_gzip_static_module --with-http_image_filter_module --with-http_spdy_module --with-http_sub_module --with-http_xslt_module NOTE: The configure arguments below return errors during 'make' so I removed them. I don't know what they are - could this be related to my issue??? --with-cc-opt='-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' --with-ld-opt='-Wl,-Bsymbolic-functions -Wl,-z,relro' Moving on: # So I don't have to sudo every line: sudo bash # Check for updates first thing: apt-get update # Install various prerequisites needed to compile Nginx: apt-get install build-essential libgd2-xpm-dev lsb-base zlib1g-dev libpcre3 libpcre3-dev libbz2-dev libxslt1-dev libxml2 libssl-dev libgeoip-dev tar unzip openssl # Create System users [ if it doesn't exist - but I see its there on DigitalOceans' Droplets all-ready ]: adduser --system --no-create-home --disabled-login --disabled-password --group www-data # Download NGINX wget http://nginx.org/download/nginx-1.7.4.tar.gz tar -xvzf nginx-1.7.4.tar.gz # Then Google PageSpeed: wget https://github.com/pagespeed/ngx_pagespeed/archive/release-1.8.31.4-beta.zip unzip release-1.8.31.4-beta.zip # cd into the PageSpeed Directory cd ngx_pagespeed-release-1.8.31.4-beta/ # and add the PSOL files in there: wget https://dl.google.com/dl/page-speed/psol/1.8.31.4.tar.gz tar -xzvf 1.8.31.4.tar.gz # Get back to the root directory: cd # I add the ngx_cache_purge module and will install the Nginx Helper plugin for WP later: wget https://github.com/FRiCKLE/ngx_cache_purge/archive/2.1.zip unzip 2.1.zip # Add the headers-more-nginx-module: wget https://github.com/openresty/headers-more-nginx-module/archive/v0.25.zip unzip v0.25.zip # and the naxsi module for added security: wget https://github.com/nbs-system/naxsi/archive/0.53-2.tar.gz tar -xvzf 0.53-2.tar.gz # cd to the new Nginx directory cd nginx-1.7.4 # Set up the configuration build based on the current running Nginx config args and add my additional modules: ./configure \ --add-module=$HOME/naxsi-0.53-2/naxsi_src \ --prefix=/usr/share/nginx \ --conf-path=/etc/nginx/nginx.conf \ --http-log-path=/var/log/nginx/access.log \ --error-log-path=/var/log/nginx/error.log \ --lock-path=/var/lock/nginx.lock \ --pid-path=/run/nginx.pid \ --http-client-body-temp-path=/var/lib/nginx/body \ --http-fastcgi-temp-path=/var/lib/nginx/fastcgi \ --http-proxy-temp-path=/var/lib/nginx/proxy \ --http-scgi-temp-path=/var/lib/nginx/scgi \ --http-uwsgi-temp-path=/var/lib/nginx/uwsgi \ --user=www-data \ --group=www-data \ --with-debug \ --with-pcre-jit \ --with-ipv6 \ --with-http_ssl_module \ --with-http_stub_status_module \ --with-http_realip_module \ --with-http_addition_module \ --with-http_dav_module \ --with-http_geoip_module \ --with-http_gzip_static_module \ --with-http_image_filter_module \ --with-http_spdy_module \ --with-http_sub_module \ --with-http_xslt_module \ --with-mail \ --with-mail_ssl_module \ --add-module=$HOME/ngx_pagespeed-release-1.8.31.4-beta \ --add-module=$HOME/ngx_cache_purge-2.1 \ --add-module=$HOME/headers-more-nginx-module-0.25 [ENTER] Configuration Summary: Configuration summary + using system PCRE library + using system OpenSSL library + md5: using OpenSSL library + sha1: using OpenSSL library + using system zlib library nginx path prefix: "/usr/share/nginx" nginx binary file: "/usr/share/nginx/sbin/nginx" nginx configuration prefix: "/etc/nginx" nginx configuration file: "/etc/nginx/nginx.conf" nginx pid file: "/run/nginx.pid" nginx error log file: "/var/log/nginx/error.log" nginx http access log file: "/var/log/nginx/access.log" nginx http client request body temporary files: "/var/lib/nginx/body" nginx http proxy temporary files: "/var/lib/nginx/proxy" nginx http fastcgi temporary files: "/var/lib/nginx/fastcgi" nginx http uwsgi temporary files: "/var/lib/nginx/uwsgi" nginx http scgi temporary files: "/var/lib/nginx/scgi" Next step: I cd to root and I check the old Nginx folder locations and double checked the 'make' output to see that they are the same: whereis nginx #Output: nginx: /usr/sbin/nginx /etc/nginx /usr/share/nginx NOTE: Not sure about the '/usr/sbin/nginx' - Possible issue??? Next I copy the old /etc/nginx/nginx.conf, /etc/nginx/sites-available/default, /etc/nginx/sites-enabled/default, /etc/init.d/nginx to a text file locally for safe keeping to use in the new Nginx server. Then stop the running Nginx server: service nginx stop , verify it's stopped: service --status-all and the output is: [ - ] nginx To verify that there are two Nginx directories, I cd to: cd nginx* and the output is an error indicating there are two nginx folders - Cool Beans! :) Now Install the new Nginx server: cd nginx-1.7.4 make install # INSTALL OUTPUT ######################################## make -f objs/Makefile install make[1]: Entering directory `/home/walkingfish/nginx-1.7.4' test -d '/usr/share/nginx' || mkdir -p '/usr/share/nginx' test -d '/usr/share/nginx/sbin' || mkdir -p '/usr/share/nginx/sbin' test ! -f '/usr/share/nginx/sbin/nginx' || mv '/usr/share/nginx/sbin/nginx' '/usr/share/nginx/sbin/nginx.old' cp objs/nginx '/usr/share/nginx/sbin/nginx' test -d '/etc/nginx' || mkdir -p '/etc/nginx' cp conf/koi-win '/etc/nginx' cp conf/koi-utf '/etc/nginx' cp conf/win-utf '/etc/nginx' test -f '/etc/nginx/mime.types' || cp conf/mime.types '/etc/nginx' cp conf/mime.types '/etc/nginx/mime.types.default' test -f '/etc/nginx/fastcgi_params' || cp conf/fastcgi_params '/etc/nginx' cp conf/fastcgi_params '/etc/nginx/fastcgi_params.default' test -f '/etc/nginx/fastcgi.conf' || cp conf/fastcgi.conf '/etc/nginx' cp conf/fastcgi.conf '/etc/nginx/fastcgi.conf.default' test -f '/etc/nginx/uwsgi_params' || cp conf/uwsgi_params '/etc/nginx' cp conf/uwsgi_params '/etc/nginx/uwsgi_params.default' test -f '/etc/nginx/scgi_params' || cp conf/scgi_params '/etc/nginx' cp conf/scgi_params '/etc/nginx/scgi_params.default' test -f '/etc/nginx/nginx.conf' || cp conf/nginx.conf '/etc/nginx/nginx.conf' cp conf/nginx.conf '/etc/nginx/nginx.conf.default' test -d '/run' || mkdir -p '/run' test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' test -d '/usr/share/nginx/html' || cp -R html '/usr/share/nginx' test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' ######################################################### I copy/create the files that I saved earlier to txt files in sites-available, the config, default and ini files then symlink them to sites-enabled, and so on. And now to start the server: service nginx start And this is where s#!+ hits the fan - Nada. I check to see if Nginx is running with service --status-all and its not. Also with nginx -V and its not installed??? I reboot the system too and still nothing. So I am not sure what is wrong here. The ini was copied over from the old server along with all the other config files after deleting the old files. When I opened the new compiled files, the nginx default data was present so I replaced them with my old original data prior to starting the new server for the first time. Also to be safe, I rm /etc/nginx/sites-enabled/default and symlinked with ln -s /etc/nginx/sites-available/default /etc/nginx/sites-enabled/default with no errors and I verified that the data was in the sites-enabled/default file. I don't think the server really/fully installed because of the nginx -V result: The program 'nginx' can be found in the following packages: * nginx-core * nginx-extras * nginx-full * nginx-light * nginx-naxsi Try: apt-get install <selected package> Do/should I apt-get install nginx-1.7.4 ?? Or what package do I use being that its a custom package and make install earlier did nothing?? If you need to see the conf files I copied over from the old to the custom server, LMK and I'll post them. Again your help here would be appreciated!

Read the article

How to resolve 0xc000007b error opening Adobe After Effects?

- by user225170

I have installed Adobe CS6 on Windows 8 and get the error "0xc000007b" every time I open open Adobe After Effects. All other Adobe software, including Photoshop and Premiere Pro, work perfectly. I have looked online extensively but have not found any solutions. What can I try/do to resolve this error? OS: Windows 8 (64 bit) - CPU: Intel Core i3-3110M 2,40GHz - RAM: 6GB DD3 - FX: AMD Radeon HD 7670M When I open Adobe After Effects CS6 with Dependency Walker, this message appears : "Error: At least one module has an unresolved import due to a missing export function in an implicitly dependent module. Error: Modules with different CPU types were found. Warning: At least one module has an unresolved import due to a missing export function in a delay-load dependent module." What can I do to resolve this error?

Read the article

Apache's httpd.exe won't run on my Windows 7

- by alexus

I went to apache.org and downloaded httpd server for my Windows7, after successful install, I try to run it and I get following message: Problem signature: Problem Event Name: APPCRASH Application Name: httpd.exe Application Version: 2.2.15.0 Application Timestamp: 4b8fed95 Fault Module Name: php5ts.dll Fault Module Version: 5.3.2.0 Fault Module Timestamp: 4b8ebac2 Exception Code: c0000005 Exception Offset: 000e6d2c OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 I’m confused, what am I doing wrong, and/or how do I fix it? Thanks in advance!

Read the article

500 Internal Server Error after changing .NET Framework Version to 4.0 in IIS7

- by René

I just changed my .NET Framework Version of the Application Pools in IIS7 Manager, following these instructions. Now when I try to re-upload my ASP.Net page, it shows me a 500 - Internal server error. I have tried uploading it in .net 2.0(X86, X64, AnyCPU), and 4.0(X86, X64, AnyCPU), and everything gives the same error. This is all the details the error gives me: "There is a problem with the resource you are looking for, and it cannot be displayed." When keeping the .NET version on 2.0 on the server, it works just fine. Also, when uploading "index.htm", it works fine as well, it just shows the HTML page. This is on Windows Server 2008 R2, by the way. EDIT: I have finally found out how to get the error details. Here they are: "Handler "PageHandlerFactory-Integrated" has a bad module "ManagedPipelineHandler" in its module list." "Most likely causes: •Managed handler is used; however, ASP.NET is not installed or is not installed completely. •There is a typographical error in the configuration for the handler module list. Things you can try: •Install ASP.NET if you are using managed handler. •Ensure that the handler module's name is specified correctly. Module names are case-sensitive and use the format modules="StaticFileModule,DefaultDocumentModule,DirectoryListingModule"." I am sure that I have installed ASP.NET completely. Please help me, -René

Read the article

Need help in setting lighttpd on Ubuntu 9.10

- by hap497

Hi, I am trying to run lighttpd on Ubuntu 9.10. I get the conf file from the doc directory of lighttpd source. $ sudo ./lighttpd -f lighttpd.conf $ ps -ef | grep lighttpd root 2094 1 0 19:40 ? 00:00:00 ./lighttpd -f lighttpd.conf This is my lighttpd.conf: $ more lighttpd.conf # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", # "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) #server.port = 81 ## bind to localhost (default: all interfaces) #server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.s ocket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "ac cess plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 When I go to browser and hit 'http://127.0.0.1', I get link not found. Any idea?

Read the article

SQL Server Express Failed to Install

- by JasCav

I am attempting to install SQL Server Express (as part of the Visual Studio 2010 Professional installation), but it is failing. I am receiving this error log. [06/22/11,16:31:39] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/22/11,16:31:40] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/22/11,16:32:12] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/22/11,16:32:12] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/22/11,16:32:12] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/22/11,17:07:55] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/22/11,17:07:55] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/23/11,10:39:33] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/23/11,10:39:33] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/23/11,10:40:22] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/23/11,10:40:22] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/23/11,10:40:22] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/23/11,10:53:48] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/23/11,10:53:48] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/23/11,13:19:26] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/23/11,13:19:26] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/23/11,16:47:36] Microsoft SQL Server 2008 Express Service Pack 1 (x64): [2] Error code -2068643839 for this component is not recognized. [06/23/11,16:47:36] Microsoft SQL Server 2008 Express Service Pack 1 (x64): [2] Component Microsoft SQL Server 2008 Express Service Pack 1 (x64) returned an unexpected value. ***EndOfSession*** I'm reading various articles which point towards something being wrong in the register, but I can't find anything specific. Any suggestions for what I can do to fix this?

Read the article

linux firefox flash debug: i don't get alerts when errors occur

- by ufk

Hello. I use firefox 3.6.13 on linux gentoo amd64 and flash 10.2 debug version, i also have firebug flashbug and flashfirebug installed. my problem is that whenever I run a flash application that encounters an error, the browser does not open an alert window. it makes it more difficult to debug applications because i need to make sure that the firebug window is always opened. the only way i can see the error is if i open the flash tab in firebug. is there a way to change this behavior ? i checked .xsession-errors and tried running firefox from console: these are the only errors the i see in the log and these errors do not appear when the flash app encounters an error which means they are not related: Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory thanks

Read the article

Compiling zip component for PHP 5.2.11 in MAMP PRO

- by Zlatoroh

Helo I installed MAMP PRO on my Macbook Pro (10.6) some time ago. Now I would like to use zip functions in php. I found that I must add zip.so to my extension folder and edited php.ini. On my computer I have two different versions of PHP one in MAMP folder and other in user/lib which was pre-installed on my system. Now I wish to compile my zip library for MAMP version. I got zip sources for my version of PHP then in terminal called function /Applications/MAMP/bin/php5/bin/phpize so it uses mamp php version ./configure make then I moved compile zip.so to extensions/no-debug-non-zts-20060613. When MAMP is launched it returns this error: [11-Apr-2010 16:33:27] PHP Warning: PHP Startup: zip: Unable to initialize module Module compiled with module API=20090626, debug=0, thread-safety=0 PHP compiled with module API=20060613, debug=0, thread-safety=0 These options need to match in Unknown on line 0 Can some body explain to me how to do this the right way.

Read the article

Errors to do with modules when using net-snmp utils

- by bob

I was using the net-snmp packages that come with my linux distro (version 5.3.2.2), but wanted to do some work with the latest version of net-snmp (5.7), so tried compiling and installing the new source. It seemed to work ok but now I'm getting a load of errors when use net-snmp utils (snmpget, snmpset snmpwalk etc..) for example: $ snmptranslate -On SNMPv2-MIB::system.sysDescr MIB search path: /home/me/.snmp/mibs:/usr/local/share/snmp/mibs Cannot find module (SNMPv2-SMI) At line 6 in /usr/local/share/snmp/mibs/SNMPv2-MIB.txt Cannot find module (SNMPv2-TC): At line 9 in /usr/local/share/snmp/mibs/SNMPv2-MIB.txt Cannot find module (SNMPv2-MIB): At line 9 in (none) : <a lot of similar lines> : Cannot find module (NET-SNMP-VACM-MIB): At line 9 in (none) .1.3.6.1.2.1.1.1 From this I assumed perhaps that I was missing mibs from the 'MIB search path', so I looked at the first error 'Cannot find module (SNMPv2-SMI)', however it seems to be in the right directory: $ ls /usr/local/share/snmp/mibs/*SNMPv2-SMI* /usr/local/share/snmp/mibs/SNMPv2-SMI.txt And the same result for the other in the list.. so I'm wondering if anybody knows why it might not be finding the modules even though they seem to be in the search path?

Read the article

/usr/bin/python (Python 2.4) was deleted on CentOS 5. I compiled from source but yum is still broken. How can I get everything back to the way it was?

- by Maxwell

I saw a lot of other questions like this but none of them answered the exact part I am having trouble with (actually installing the Python RPM). Someone on my system deleted /usr/bin/python and /usr/bin/python2.4 on my 64 bit CentOS 5.8 installation. I recompiled Python 2.4 from source, but now whenever I try to yum install anything I get the following error: [root@cerulean-OW1 ~]# yum install httpd There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named yum Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.4 (#1, Dec 16 2012, 09:16:56) [GCC 4.1.2 20080704 (Red Hat 4.1.2-52)] If you cannot solve this problem yourself, please go to the yum faq at: http://wiki.linux.duke.edu/YumFaq I checked http://wiki.linux.duke.edu/YumFaq and it said the following: If you are getting a message that yum itself is the missing module then you probably installed it incorreclty (or installed the source rpm using make/make install). If possible, find a prebuilt rpm that will work for your system like one from Fedora or CentOS. Or, you can download the srpm and do a rpmbuild --rebuild yum*.src.rpm I tried going to http://rpm.pbone.net/index.php3/stat/4/idpl/17838875/dir/centos_5/com/python-2.4.3-46.el5.x86_64.rpm.html to install Python, which resulted in the following error: [root@cerulean-OW1 ~]# rpm -Uvh python-2.4.3-46.el5.x86_64.rpm error: Failed dependencies: python-libs-x86_64 = 2.4.3-46.el5 is needed by python-2.4.3-46.el5.x86_64 So I tried installing python-libs-x86_64, which resulted in the following: [root@cerulean-OW1 ~]# rpm -Uvh python-libs-2.4.3-46.el5_8.2.x86_64.rpm warning: python-libs-2.4.3-46.el5_8.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 192a7d7d Preparing... ########################################### [100%] package python-libs-2.4.3-46.el5_8.2.x86_64 is already installed file /usr/lib64/libpython2.4.so.1.0 from install of python-libs-2.4.3-46.el5_8.2.x86_64 conflicts with file from package python-libs-2.4.3-46.el5_8.2.x86_64

Read the article

ServerRoot in my lighttpd.conf

- by michael

Hi, I have use the following example lighttpd.conf to launch my lighttpd. Can you please tell me where is my 'ServerRoot'? # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) server.port = 9090 ## bind to localhost (default: all interfaces) server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => 1026, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", #"docroot" => "/" # remote server may use # it's own docroot )) ) ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.socket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 Thank you.

Read the article

How to run node.js app on port 80? Are processes blocking my port?

- by Lucas

I believe the port 80 on my remote instance is blocked, and I am trying to run a node.js app using port 80. I have experimented with ports 3000 and 3002, and both ports are working fine, but I get an error when running on port 80. I suspect port 80 is blocked from my output of netstat -an below, but how can I find the process id's of the addresses that are blocking port 80 below? [lucas@ecoinstance]~/node/nodetest1$ netstat -an Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:3002 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:27017 127.0.0.1:51108 ESTABLISHED tcp 0 0 127.0.0.1:51106 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51106 ESTABLISHED tcp 0 0 127.0.0.1:51107 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:3002 174.61.171.61:36583 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51109 ESTABLISHED tcp 0 0 10.240.241.116:42423 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51108 127.0.0.1:27017 ESTABLISHED tcp 0 532 10.240.241.116:22 174.61.171.61:56824 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51107 ESTABLISHED tcp 0 0 10.240.241.116:42412 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51109 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:51105 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:42422 169.254.169.254:80 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51105 ESTABLISHED tcp6 0 0 :::22 :::* LISTEN udp 0 0 0.0.0.0:49948 0.0.0.0:* udp 0 0 0.0.0.0:68 0.0.0.0:* udp 0 0 10.240.241.116:123 0.0.0.0:* udp 0 0 127.0.0.1:123 0.0.0.0:* udp 0 0 0.0.0.0:123 0.0.0.0:* udp6 0 0 :::12151 :::* udp6 0 0 :::123 :::* Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 405680 /tmp/ssh-KdkxJfFLpKTC/agent.22 813 unix 2 [ ACC ] STREAM LISTENING 408230 /tmp/ssh-ofUeNNEwAqtP/agent.22 243 unix 2 [ ACC ] STREAM LISTENING 416227 /tmp/mongodb-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 /run/udev/control unix 7 [ ] DGRAM 5286 /dev/log unix 2 [ ACC ] STREAM LISTENING 5318 /var/run/acpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 /tmp//tmux-1000/default unix 2 [ ACC ] STREAM LISTENING 414450 /var/run/dbus/system_bus_socke And here is the log when trying to run on port 80 with node.js: [lucas@ecoinstance]~/node/nodetest1$ npm start > [email protected] start /home/lucas/node/nodetest1 > node ./bin/www events.js:72 throw er; // Unhandled 'error' event ^ Error: listen EACCES at errnoException (net.js:904:11) at Server._listen2 (net.js:1023:19) at listen (net.js:1064:10) at Server.listen (net.js:1138:5) at Function.app.listen (/home/lucas/node/nodetest1/node_modules/express/lib/applicati on.js:532:24) at Object.<anonymous> (/home/lucas/node/nodetest1/bin/www:7:18) at Module._compile (module.js:456:26) at Object.Module._extensions..js (module.js:474:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:312:12) npm ERR! [email protected] start: `node ./bin/www` npm ERR! Exit status 8 npm ERR! npm ERR! Failed at the [email protected] start script. npm ERR! This is most likely a problem with the nodetest1 package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node ./bin/www npm ERR! You can get their info via: npm ERR! npm owner ls nodetest1 npm ERR! There is likely additional logging output above. npm ERR! System Linux 3.13-0.bpo.1-amd64 npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "start" npm ERR! cwd /home/lucas/node/nodetest1 npm ERR! node -v v0.10.28 npm ERR! npm -v 1.4.9 npm ERR! code ELIFECYCLE npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/lucas/node/nodetest1/npm-debug.log npm ERR! not ok code 0 And sudo netstat -lnp does not return any matching port 80's: [lucas@ecoinstance]~/node/nodetest1$ sudo netstat -lnp [48/648] Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Progr am name tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 29160/mon god tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1976/sshd tcp6 0 0 :::22 :::* LISTEN 1976/sshd udp 0 0 0.0.0.0:49948 0.0.0.0:* 1604/dhcl ient udp 0 0 0.0.0.0:68 0.0.0.0:* 1604/dhcl ient udp 0 0 10.240.241.116:123 0.0.0.0:* 2076/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 2076/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 2076/ntpd udp6 0 0 :::12151 :::* 1604/dhcl ient udp6 0 0 :::123 :::* 2076/ntpd Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ACC ] STREAM LISTENING 405680 22814/ssh-agent /tmp/ssh-K dkxJfFLpKTC/agent.22813 unix 2 [ ACC ] STREAM LISTENING 408230 24049/ssh-agent /tmp/ssh-o fUeNNEwAqtP/agent.22243 unix 2 [ ACC ] STREAM LISTENING 416227 29160/mongod /tmp/mongo db-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 284/udevd /run/udev/ control unix 2 [ ACC ] STREAM LISTENING 5318 1798/acpid /var/run/a cpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 5177/tmux /tmp//tmux -1000/default unix 2 [ ACC ] STREAM LISTENING 414450 28213/dbus-daemon /var/run/d bus/system_bus_socket unix 2 [ ACC ] STREAM LISTENING 404225 22324/1 /tmp/ssh-9 TlDmu4bjl/agent.22324

Search Results

Search found 44058 results on 1763 pages for 'function module'.

Page 298/1763 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305 | Next Page >

- by solotim

- by Rosarch

- by Achilles

- by Cheeso

- by Rick Strahl

- by Ricardo Peres

- by Pinal Dave

- by Your DisplayName here!

- by Duncan Mills

- by A.M.K

- by user40404

- by JavierMartinez

- by Jason Alan Kennedy

- by user225170

- by alexus

- by René

- by hap497

- by JasCav

- by ufk

- by Zlatoroh

- by bob

- by Maxwell

- by michael

- by Lucas

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305 | Next Page >