Search Results

Search found 22893 results on 916 pages for 'message queue'.

Page 298/916 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >

• How can I configure a Linksys EA4500 + usb printer for network printing (without connect cloud)

  - by Larry Kyrala

  The documentation and classic firmware (2.0.37) for Cisco's Linksys EA4500 is a bit sparse on setup details. It says I can connect a USB-printer, but then goes on to try to sell "Connect Cloud" remote management software. I don't want that. I just want to know how to set this up with the existing advanced firmware. Is it possible? AFAIK, to setup a IPP or LDP printer, there is usually some kind of queue configuration on the server (i.e. the ea4500 in this case), but I can't find it in the firmware. I also have been unable to find any existing protocols from win7 or mac osx. (windows network share, IPP/LDP etc.) I'm curious if I need to have the "Storage" accounts active and connect to my router either via the local IP or router name. There's a lot of unknowns here; it would help to know how this particular router actually works.

  Read the article

• Assigning resources to MS Project 2007

  - by adam

  Hi, I'm planning a redesign of a site in Project 2007. I have three developers to hand, all with the same skills. There are about 80 templates to be rendered as part of the redesign, and each template has been added as a project task. Each of these tasks can be done by any of the 3 devs, and each will take a day (with a few exceptions). There is no order in which the tasks must be completed, so there are no predecessor rules. I'd like to be able to assign tasks to a 'Developer' resource group, and for Project to see that three tasks can be done at once (as the group has three resources members) and queue the tasks as such. Googling leads me to Team Assignment, but that appears to be part of Project Server. Surely I can do this in standalone Project? Thanks, Adam

  Read the article

• Upgrading Visio 2000 to Visio 2007

  - by dirtside

  I have Microsoft Visio 2000 SR 1, and recently purchased Microsoft Office Visio Standard 2007 with the understanding (supported by the product info and some other research) that I'd be able to upgrade. However, when I install 2007, it tells me it can't find a previous install of Visio, but... it's right there! Here's the exact message: "Setup can't find a version of Microsoft Office on your computer. If Office is installed on a disk or network share, click the browse button to select the appropriate disk or share... (etc.)" No matter which directory or drive I pick (various Office installs, the old Visio install, various subdirectories) it gives the following message: "The path you have chosen does not point at a qualifying upgradeable product. Click 'Retry' to try again or 'Cancel' to quit setup." Any ideas? This is a legit copy of Visio 2007 (purchased from Amazon) and the copy of Visio 2000 is legit as well. I'm not sure what exactly the installer is looking for that it would consider a "qualifying upgradeable product". A specific file?

  Read the article

• samba "username map" stopped to work

  - by Kris_R

  It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user Kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems. p.s. i've asked this question at serverfault but no answer came. Maybe I have more luck with this forum. Sorry for duplicate if any of you reads both.

  Read the article

• Windows errors, how do I find root cause and fix it? Getting several errors

  - by Eric Martin

  My server is having issues and not responding to customer's https requests. I checked the event viewer and found several errors. These two are listed a couple of times: WINS encountered a database error. This may or may not be a serious error. WINS will try to recover from it. You can check the database error events under 'Application Log' category of the Event Viewer for the Exchange Component, ESENT, source to find out more details about database errors. If you continue to see a large number of these errors consistently over time (a span of few hours), you may want to restore the WINS database from a backup. The error number is in the second DWORD of the data section. And this one: An error occured while using SSL configuration for socket address 0.0.0.0:444. The error status code is contained within the returned data. SQL Server is not ready to accept new client connections. Wait a few minutes before trying again. If you have access to the error log, look for the informational message that indicates that SQL Server is ready before trying to connect again. [CLIENT: xxx.xxx.xxxx.xxx] I also found this in the event viewer but the computer has been restarted since this message and I have not seen it again. Configuring the Page file for crash dump failed. Make sure there is a page file on the boot partition and that is large enough to contain all physical memory. This is my virtual memory settings: I'm not familiar with WINS so I wasn't sure if that is where I start or how to resolve it. Is the WINS error causing the other problems or should I be looking somewhere else?

  Read the article

• How to set printer permissions using PowerShell / some other script?

  - by Borek

  I need to update printer's permissions in a script, i.e. do the same as I would manually do this way: Open Devices and Printers applet Double-click the default printer (open its queue) Go to Printer - Properties In the properties dialog, go to Security tab Change permissions for Everyone (e.g., check Manage documents permissions) How to do that? For example, in PowerShell, I can do Get-WmiObject -class win32_printer -filter Default=True to get the default printer and there are then methods getSecurityDescriptor() and setSecurityDescriptor() but for instance this command: (Get-WmiObject -class win32_printer -filter Default=True).getsecuritydescriptor().Descriptor return null so I'm not sure if I'm doing it the right way. Does anyone have a working example to set printer permissions? Am I on the right path or should I use something other than WMI entirely? Thanks.

  Read the article

• How do I connect a 2008 server to a 2003 server active directory?

  - by Matt

  Our DC is running Windows Server 2003. I've just set up Windows Server 2008 and have terminal server running on it. When setting the terminal server permissions, it was able to allow a group name that was read from the domain. In the DC the new terminal server shows up as a computer in the domain. I can also log in as a user within the domain even though that user doesn't exist locally on the new server. However, when I go to set sharing permissions on the new machine it doesn't show my domain as a location. Instead it is only looking at location "machinename" and not allowing domain to be seen or added. Is there something I'm missing? Ok, lots of errors in the event log. We have this: The winlogon notification subscriber is taking long time to handle the notification event (Logon). Followed by this: The winlogon notification subscriber took 121 second(s) to handle the notification event (Logon). Followed by: The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has succesfully processed. If you do not see a success message for several hours, then contact your administrator. I think this might be the same problem I'm having http://serverfault.com/questions/24420/primary-domain-controller-slow Solved. The issue was that I had changed from DHCP to static and put the wrong DNS server IP in. i.e. firewall instead of DC/DNS server.

  Read the article

• samba "username map" stopped to work after upgrade to 3.6

  - by Kris_R

  It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems.

  Read the article

• Usb device not working properly on a Thinkpad T60

  - by Xavierjazz

  I have just started getting a message that a USB device is not working properly. This is on a new Thinkpad T60 running Windows XP Professional SP3. I have had all devices attached for about 10 days or so. When I go to device manager there is no sign of a problem: everything is working correctly. I am unable to find out which device it is. I searched this forum but the only reference I found was to older computers which may not be Usb2 capable. This is not my problem. Any ideas? Thanks. EDIT: I realized I had a harddrive attached but turned off. Although I could not track down any error messages except the balloon that came up, I have disconnected it and, so far, no messages. We'll see over the next day or two, but this may be the problem. Thanks EDIT: This has not solved the problem. I get the message that one of the USB devices has malfunctioned and it points to "USB root hub (2 ports)" and shows an unused port and an unknown device. However, when I check my device manager, it says that there are no problems, everything is working as it should. ?? EDIT: I now found the event log view and there are 2 types of error messages. They do not relate to the time that I get the balloon. 2 of the 3 are "Ati2mtag" errors and the third is "System Control Manager". Are these related to my problem, and the balloon just pops up randomly? EDIT: well, I'm still having the problem, and have narrowed it down to a malfunctioning device. Thanks to all.

  Read the article

• Why am I getting blank error messages in my Apache error log?

  - by Jason Lamoreux

  I am running Apache 2.2 on 64bit Windows Server 2008 Std edition with ActivePerl 5.8.9. My error log is filling up with blank error messages like these: [Wed Mar 31 14:08:31 2010] [error] [client 10.6.1.164] [Wed Mar 31 14:10:32 2010] [error] [client 10.6.1.89] [Wed Mar 31 14:13:20 2010] [error] [client 10.6.1.131] By looking in the access log I can tell that it occurs when our client machines issue a GET to a very simple Perl script. #!perl.exe use strict; no warnings; $|=1; use CGI::Carp('fatalsToBrowser'); use CGI qw(:standard); print header; my $CRLF = "\r\n<br>"; my $Port = '10116'; print "Success!${CRLF}PollInterval=5${CRLF}LMProMode${CRLF}Version=7${CRLF}ConnectionPort=$Port"; exit; The weird thing is that it does not look like this error message is inserted every time a GET to this Perl script occurs. What could cause this error message to appear in the Apache error log?

  Read the article

• Outlook error-'Can't open e-mail folders.You must connect to Exchange w/ current profile before you can sync folders w/ your Outlook data file'

  - by Emilio

  Note that the error message I put in the title of this question is abbreviated. The actual error message is below. I have an Exchange account and using Outlook 2010 as the client. I run in Cached Exchange Mode and have an .OST file locally. Recently I uninstalled and reinstalled office. I set up a new mail profile when prompted by Outlook 2010 upon first execution of the program. In my initial attempt, I pointed the data file at my existing OST file. In my second attempt, I had Outlook create a fresh empty file. In both cases I'm getting the error 'Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost).', also shown in this screenshot -- http://drop.io/4rc9v9o/asset/outlook-error-png. I don't know how to connect with the current profile - that's what I thought I did when I created a new .OST file? I've had this problem for several days so my OST file is now out of date. Once I get things running I obviously want my active mailbox to update the OST, not the other way around.

  Read the article

• Failed loading ioncube

  - by time

  I recently upgraded a small server to Ubuntu 12.10 (from 12.04), thus upgrading PHP from 5.3 to 5.4. However, I'm getting this in root's mailbox several times a day: Subject: Cron <root@xxxxxxx> [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -ignore_readdir_race -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete Content-Type: text/plain; charset=ANSI_X3.4-1968 X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/root> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=root> Message-Id: xxxxxxxxxxxxxxxxxxxxxxxx Date: Sun, 9 Dec 2012 05:09:02 -0500 (EST) Failed loading /usr/lib/php5/20090626+lfs/ioncube_loader_lin_5.3.so: /usr/lib/php5/20090626+lfs/ioncube_loader_lin_5.3.so: undefined symbol: php_body_write I assume that's coming up because it's for PHP 5.3. How can I just get rid of ioncube? I have no need for it, I don't even remember installing it. That .so file doesn't exist, and I've grep'd several locations for "ioncube" and I can't seem to figure how to stop that message from flooding the mailbox.

  Read the article

• arp requests are sent continuously and my linux machine disconnected to the world

  - by sees

  I have the following problem and really need your help I'm implementing a small server to receive request from client on port 18999(just sample) using TCP socket. When I tested my server by using a lot of requests from a tablet through a router, I got the ARP problem(?) My net work just like: TABLET <------- WIRELESS ROUTER <------- MY SERVER (LINUX) Problems: 1. Can not connect to my Linux any more ( telnet, ping v.v...unreachable) 2. I use serial cable to connect to my Linux machine and use Wiresharp (from Windows) to catch the send message from Linux. It says that Linux keeps sending out continuously every 3 seconds ARP messages like the following: xx:xx:99:77:ff:69 ff:ff:ff:ff:ff:ff ARP 60 Who has 192.168.10.2? Tell 192.168.10.3 In the above message: xx:xx:99:77:ff:69 my Linux MAC address 192.168.10.2 my Tablet address 192.168.10.3 my Linux IP address Can you help me figure out the problem? Or tell me the way to detect the problem and reset the network back to normal (maybe restart Linux but I want to detect problem and restart automatically) UPDATE: 1. The above network works normally if tablet sends messages to my LINUX in normal speed (but also down after 48 hours) 2. The router works again after I unplugged my Linux ethernet cable (RJ45) from router. 3. The wireless network still works ( I can browser the router page from tablet) 4. When I use: ifconfig down then ifconfig up , the Linux restarts (?????????)

  Read the article

• OpenSwan (IPSEC) on Fedora 13 with Snow Leopard as a client

  - by sicn

  I recently installed OpenSwan on my Fedora 13 machine. I want to use it to connect with Mac OS X with L2TP over IPSEC, unfortunately I am already stuck on the IPSEC-negotation part. My server is running behind a NATted firewall so my external IP differs from the server's IP. The server has a fixed IP on the network and the same is almost always valid for the clients (they are usually behind a NATted firewall). I installed OpenSwan on Fedora 13 and have following configuration: config setup protostack=netkey nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off nhelpers=0 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=my.servers.external.ip leftprotoport=17/1701 right=%any rightprotoport=17/0 IPSEC starts fine and listens to UDP 500 and 4500. These two ports are opened in the firewall and are forwarded fine to the server. In my /etc/ipsec.secrets file I have my.servers.external.ip %any: "LongAndDifficultPassword" And finally in my sysctl.conf (the redirect-entries are there because OpenSwan was strongly protesting about send/accept_redirects being active) I have net.ipv4.ip_forward = 1 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.all.accept_redirects = 0 Running "ipsec verify" gives me "all greens" (except Opportunistic Encryption Support, which is DISABLED), however, when trying to connect my Mac gives me following in the logs: Nov 1 19:30:28 macbook pppd[4904]: pppd 2.4.2 (Apple version 412.3) started by user, uid 1011 Nov 1 19:30:28 macbook pppd[4904]: L2TP connecting to server 'my.servers.ip.address' (my.servers.ip.address)... Nov 1 19:30:28 macbook pppd[4904]: IPSec connection started Nov 1 19:30:28 macbook racoon[4905]: Connecting. Nov 1 19:30:28 macbook racoon[4905]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Nov 1 19:30:31 macbook racoon[4905]: IKE Packet: transmit success. (Phase1 Retransmit). Nov 1 19:30:38: --- last message repeated 2 times --- Nov 1 19:30:38 macbook pppd[4904]: IPSec connection failed Any ideas at all?

  Read the article

• add printer on windows 7 with vbscript and wmi

  - by Jessica

  I have a problem where I can't add a printer on my Windows 7 machine, because it fails with "The printer driver is unknown" (error code 1797) using WMI/VBScript. The thing is that the printer driver already exists on the PC. I've used AddPrinterConnection to connect to the remote printer queue, and the drivers get installed. I've confirmed they exist by a) Enumerating Win32_PrinterDriver with WBEMTEST utility which shows the driver, and also in the Printer Management MMC snap-in. Is there some other scriptable way I can get this to work? I'm adding a local TCP/IP port, pointing my new printer object instance to use that port and the driver from using AddPrinterConnection, and giving it a name, but it refuses to work...

  Read the article

• How to move a sata drive to a machine without AHCI mode

  - by Andrew Cooper

  I've got a Dell Inspiron 1545 on which the screen has died. I'm able to plug an external monitor into the Inspiron 1545 and it works fine, so the screen is the only issue. The OS is Win7. I'm trying to move the disk to a spare Dell Precision M90 laptop that I've got lying around. The problem is that almost as soon as the Windows logo appears in the boot sequence I get a BSOD with a STOP 0x0000007B message. Researching this message pointed to issues with SATA AHCI mode. I looked in the BIOS of the Inspiron 1545 and the controller was set to AHCI mode. I set it to ATA mode and tried to boot with the same drive and got the same result as on the Precision M90. Switching back to AHCI allowed the machine to boot correctly again. I checked the BIOS on the Precision M90 and it doesn't seem to support AHCI mode, although it is a SATA controller onboard. The BIOS is the latest A08 version available from Dell. Is there any way I can get this drive to boot in the M90 without reformatting it?

  Read the article

• Volume licenced copy of MS Office 2007 shows "Non Commercial Use" in title bar

  - by Linker3000

  I have just removed the demo copy of Office 2007 preinstalled on a new laptop and replaced it with an install of the full professional edition downloaded from the MS Volume Licensing site and installed one of our volume licence keys, yet the apps (Word etc.) show "Non Commercial Use" in the title bar, which is what usually happens in the Home and Student edition. I have tried: Deleting the Office registration keys in the registry and using one of our other Office 2007 volume licence keys (we have 7) when prompted to re-register Uninstalling Office completely and reinstalling it from a newly-downloaded ISO burned to CD and also from a compressed file that installs from hard disk/USB stick (both from Microsoft - no dodgy stuff) Yet the non-commercial message persists. Although it's a cosmetic issue, the laptop is going to be used for customer presentations and so the sales person is rightly concerned about the image this portrays. I presume there may be something floating around the registry or in a file somewhere but I can't find it. Articles I have found elsewhere just refer to the message being related to the use of a Home and Student licence key, which is 100% not the case. Any thoughts? Thanks.

  Read the article

• Windows 2008 Print Server issue

  - by HokieMike

  I have a dedicated windows 2008 server I use as a file server and print server at my home office. Whenever I print documents from one of my clients, I see the document hit the queue on the server immediately (says its in "printing" status), but it takes FOREVER to print out (like over 5 minutes). But, printing the same document locally from the server takes 4 seconds. It's an HP 1006P laser printer. I am running 32-bit 2008 Server. Installed the Vista drivers ( updated to latest version ). Tried updating the drivers on the clients too and no dice. Any ideas on how to troubleshoot?

  Read the article

• Vista WHS Client stopped resolving local names

  - by andrewcr

  I’m running Windows Home Server PP2 in my home, with 3 client computers: two XP and one Vista. I have a router that provides my local DHCP and the server has a static IP address. The other day the Vista machine hung, and on reboot stopped resolving local names. It will show the green home server client icon in the system tray, but if I attempt to log in to the console, I get a “This computer cannot connect to your home server” message. If I ping the server name from the command line, it does not resolve, and gives a “could not find host” message. Oddly enough, if I browse the network, I can see the server, but double clicking on it fails. The other machines on the local network have no problems seeing the server, and the Vista machine has no problems resolving names from the internet, it just can’t see any local machines. I’m aware that I can work around this by adding entries to my HOSTS file (it does work), but I’d like this to work the way it’s “supposed” to. I’m an experienced computer user and developer, but not a networking whiz. Can anyone tell me how local name resolution is supposed to work in my environment and/or suggest ways to troubleshoot this? Thanks, Andy

  Read the article

• Keep printed documents on Windows Server 2008 R2 Print Server

  - by MadBoy

  I've setup Windows 2008 R2 as print server. I have checked option Keep printed document option for all printers and it works fine. Users print their stuff and i can see what they are doing. Problem is everyone sees all documents that are getting printed which is not always the best idea. Is there a way to: Limit print jobs to be only seen by people who printed them and admins Limit print jobs to be only seen on server (from within Server Manager) and so print jobs dissapear when print job is done from user queue (but then admins are still able to see it and track what's printed and when for reporting purposes). Create some kind of access level list so that some people can see everything geting printed, some people see their print jobs and some people see nothing :-)

  Read the article

• Backup solution, or, how Duplicati duped me

  - by blarghmaster

  TL/DR version: Mono + Duplicati.commandline.exe restore etc. etc. spits this out for several files regardless of what I try. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Any advice here, or an idea of where to look for a better solution? FULL STORY: Ive recently put together an nice clean, friendly backup solution for several servers, predominantly Linux, but occasionally a windows box is added too. The solution as is meets all my requirements and does it well... save 1: cross-compatibility The solution is based on a combination of several elements, but eventually comes done to using Duplicity and Duplicati for the actual storage of files. The entire solution was ready to go before i realized that Duplicati, does not, in fact allow me to restore my files to a Linux box, regardless of what the commandline under Mono might tell you. It just spits out errors on random zip and image files, for apparently no good reason as i have tried several options to get it to restore, and several versions of Mono including installing it pretty much lib-for-lib. There is no effective log file for the reasons for these errors, and even the "--debug-output=true" flag does nothing. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Now i could most likely use the friendly instructions on Duplicati's site and script a bash equivalent of the restore, but that's not exactly ideal. Any advice on this? or possibly an alternative solution that presents the same benefits of Duplicati/Duplicity but that actually works across platforms?

  Read the article

• Uninstall Perl 5.10 and Install 5.8 on Ubuntu 10.04

  - by user48848

  I was using Ubuntu 8.04 with installed Perl 5.8.8. I had installed Bugzilla 3.4.4 with some custom scripts and it was working fine. I had to upgrade Ubuntu from 8.04 to 10.04 and automatically Perl is also upgraded from Perl 5.8 to 5.10. Now, accessing Bugzilla displays an error message related to Perl module. While trying to run checksetup.pl, I am getting the following error message: root@cvsnew:/var/www/bugzilla-3.4# perl checksetup.pl * This is Bugzilla 3.4.3 on perl 5.10.1 * Running on Linux 2.6.32-24-generic-pae #39-Ubuntu SMP Wed Jul 28 07:39:26 UTC 2010 Checking perl modules... Checking for CGI.pm (v3.33) ok: found v3.48 perl: symbol lookup error: lib/i486-linux-gnu-thread-multi/auto/Digest/SHA/SHA.so: undefined symbol: Perl_Tstack_sp_ptr Accessing Bugzilla throws : "500 Internal Server Error". I explored this issue and found that this issue has come up because upgrading Ubuntu upgrades Perl 5.8 to 5.10 automatically. It seems like Perl 5.10.1 isn't binary compatible with the previous. Now, I want to uninstall Perl 5.10.1 and Install Perl 5.8.8 on my Ubuntu 10.04 box. I will appreciate if someone has already done that or share the required steps/commands to do it.

  Read the article

• Lenovo L440 won't boot into Debian installation CD or Debian-installed HDD

  - by Spencer B Liberto

  I have a Lenovo L440 and a Lenovo X61. I want to install Debian Wheezy on thee L440. This morning, the L440 could successfully boot into Windows 8 from it's hard drive. I created an installation of Wheezy on a USB flash drive with Unetbootin. I created an installation CD of Wheezy with Unetbootin. The X61 can successfully boot into the flash drive. The X61 does not have a CD drive. I have attempted to boot from the live CD and the flash drive from the L440's boot menu. In both cases, the screen fades to black, and then returns me to the boot menu with no error message. I removed the L440's hard drive, and installed it in the X61. I then successfully installed Wheezy onto the hard drive from the flash drive. I'm able to boot into the Wheezy hard drive on the L440. After replacing the hard drive into the L440. I booted from the hard drive from the boot menu. Once again, the screen fades to black, and then returns me to the boot menu with no error message. What's the deal?

  Read the article

• Error when starting qpidd as a service

  - by Sparks

  I have recently swapped from CENTOS 5 to FEDORA 17. Previously I have created my own init.d scripts successfully (albeit not for qpidd) however, in FEDORA I cannot get it to work. I have created the following script (called qpidd) in the init.d directory: #!/bin/bash # # /etc/rc.d/init.d/qpidd # # QPID/AMQP Broker scripts # # # chkconfig: 2345 20 80 # description: QPID/AMQP Broker service # processname: qpidd # pidfile: /var/lock/subsys/qpidd # Source function library. . /etc/init.d/functions SERVICENAME=qpidd start() { echo -n "Starting $SERVICENAME: " daemon qpidd -d & retval=$? touch /var/lock/subsys/$SERVICENAME return $retval } stop() { echo -n "Shutting down $SERVICENAME: " qpidd -q & retval=$? rm -f /var/lock/subsys/$SERVICENAME return $retval } case "$1" in start) start ;; stop) stop ;; status) status qpidd ;; restart) stop start ;; condrestart) [ -f /var/lock/subsys/<service> ] && restart || : ;; *) echo "Usage: $SERVICENAME {start|stop|status|restart" exit 1 ;; esac exit $? After this, I ran chkconfig --add qpidd, however, now when I run sudo service qpidd start I get the following message: Starting qpidd (via systemctl): Job failed. See system journal and 'systemctl status' for details. If I then run systemctl status qpidd I get the following message: Failed to issue method call: Unit name qpidd is not valid. I am now lost, I have search the web and Stack Overflow but cannot find anybody with similar problem, any help or direction to a website that can help would be much appreciated Sparks :)

  Read the article

• application monitoring tools

  - by Shachar

  we're an ISV about to deploy our SaaS application over the internet to our end users, and are currently looking for an application monitoring solution. In addition to monitoring the usual OS-level suspects (I/O, disk space, logs, CPU, RAM, swapping, etc.), we're also looking to monitor, alert and report on internal application events, conditions, and counters (think queue size for internal service, or latency of a service we're getting from a third party via custom APIs). We're started looking at Nagios, Zenoss, etc., but found out those do only low-level stuff, and are currently looking at MOM and ManageEngine. Still, they are far from being an custom app monitoring tool. So - do you have anything to suggest?

  Read the article

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >