Search Results

Search found 2154 results on 87 pages for 'bios'.

Page 3/87 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Computer hangs at BIOS screen. Cannot enter setup

  - by d2jxp

  I have an HP Pavilion a6500f (it's a year out of warranty) and it's hanging on the blue HP BIOS screen. If I mash F10 while it's starting up, it will say "Entering Setup..." but I will see no results. It will hang there and not do anything. If I actually wait until I can see the screen and then hit F10, there's no response at all and the computer will sit at the BIOS menu. I've dusted and cleaned it out, reseated the memory, switched the RAM slots, and reset the CMOS battery using the reset jumper. I'm out of ideas. I'm pretty sure it's not a hard drive issue, since my problem is at the BIOS. After this post, I'll disconnect the hard drive and try to just boot without it. Anyone have any other ideas? Edit: Okay, so I tried disconnecting the hard drive and now I can get back into the BIOS. I reconnected it and I'm locked out again. So the problem is my hard drive.. I guess I should delete this post unless someone has any ideas as to what's wrong with the drive?

  Read the article

• I can't connect to internet via lan cable because 2032 battery died and my bios bios info is now empty [closed]

  - by Rand Om Guy

  I have a compaq CQ61-112SL from about 5 years now... the main battery is almost dead, doesn't keep more then 10 minutes. anyway my problem is that my motherboard battery didn't have any more energy left a few days ago and since then I can't access internet through lan cable but only via wifi. I need cable though. I saw that on my BIOS setup page there were a bunch of parameters missing like serial number, UUID, product number and stuff like that. Also when I start the notebook it prints something like : No serial found. or something like that. I don't really know if the reason why my lan cable doesn't work is the empty BIOS but i assume that's it. If it's not please enlighten me. Or anyway tell me how to update the serial number and product number to the real ones (instead of the 0000000000000 that is now in my bios). I downloaded HP DMI which should make it possible to set these variables on the BIOS but i'm on Windows 8 64bit and the executable file that I need to open for my laptop model says it can't run on 64 bit.

  Read the article

• Can't update BIOS on Dell E6530

  - by hasgarion

  I have a problem with the video output on my E6530. It does not show anything during POST on my external screens. As it seems this is related to A09 BIOS which is currently installed. I wanted to upgrade to A11 BIOS and downloaded the installer from the Dell Website. The installer launches correctly and displays the current version, the update versions and reboots the system afterwards. Bit the BIOS version remains A09. I have no idea where to start troubleshooting. Any hints? Thank you very much. System Spec: OS: Windows 7 x64 SP1 AV: Kaspersky Endpoint Security 8.1 UAC: Disabled, my user is in the Administrators group

  Read the article

• What is the purpose of a boot priority sequence or order in BIOS

  - by rbeede

  A BIOS provides multiple options for specifying an order/priority to search for boot devices. Is there really much of a purpose now to have to specify more than one possible boot device? It would seem to me it is only useful when popping in an CD/DVD to install an OS after which the common scenario is to always boot from the hard drive unless something is broken. I'm curious as to why not simply have 1 option/device to set in the BIOS and expect the user to press a key to do alternate boot instead? Is there still a scenario for having the BIOS try multiple devices in a configured order?

  Read the article

• Create a CDROM Bootdisk to update BIOS

  - by osij2is

  So, I have a Tyan Opteron board with a very old BIOS version. I realize Opteron's aren't exactly common like Athlons, Phenoms, Intel CPUs, etc. but my question revolves around updating the BIOS, however I don't have a floppy drive and there's no option to boot off of a USB key. Tyan has incomplete instructions on their website (link) on how to flash the BIOS via USB. So my second tactic has been to create a Windows 98 boot-able CDROM with the flash utilities on it. It's been years since I've made one but after going to sites like bootdisk.com and such I haven't had any success. Can anyone tell me step-by-step how to make a boot-able Windows 98 CDROM? I can't believe I'm having such a hard time doing this but I've failed on four different attempts and I must be doing something wrong or I'm not accounting for something.

  Read the article

• Problem with bios update on Intel S3420GP

  - by wurlog

  I am using the Intel Develepment Assistant CD, but after choosing the newest update I can see a red text but just for a second. Afterwards it tells me to reboot, but it is still the same bios version as before. I can't find access the error message. The whole software seams to be a linux. Maybe I can access a console and look into the log files?? Or are there other solutions to update the bios? EDIT: I tried to download the bios/firmware update packages (using it via network share, because the usb stick wouldn't work), but the software wont use it.

  Read the article

• Bios wont post unless I restart power supply.

  - by remy

  I have an annoying problem with a computer. The BIOS wont post after it has been turned off and started again unless I turn the switch off/on on the power supply. The fans, cdrom hdd and everything starts running but the bios never beeps and the monitor stays black. I HAVE TRIED: reinstalling windows xp, flashed bios to latest, cmos clear, new power supply, other hdd, new memory sticks, graphics card. I also removed the motherboard from the computer case and laid it on a cardboard box and only connected the PSU, RAM and CPU. Other than this the computer works great but its annoying having to off/on the power supply switch before turning it on after its been off. My guess is that the motherboard is faulty but I would just like to hear what you guys think. Sorry for my english / Remy

  Read the article

• Laptop wont start after BIOS update

  - by Maven

  I have a HP Probook 4540s i recently update its BIOS from HP's site after the installation the notebook re started but since after that there is no display i waited for an hour until the battery ran off after when i plugged in its same: Capslock is contunously blinking Fan is running faster than the usual speed i can tell this from the sound And no display i waited for more than hour for any response but no gain. Searched Internet and find out that alot people fails to update their BIOS in HP laptop i dont know why official HP sites has such updates even avaialble. Is there a way i can reset the BIOS, Hard reset, through USB of something i have another PC over which i can download anything if its required? Can anyone please help.

  Read the article

• Vostro 1520 crash during bios update

  - by Deadmilkman

  My Vostro 1520 (P8700 C2D) originally came with BIOS A02. This bios version have known problems with VT, so I had to upgrade to A05. During the upgrade, the notebook crashed. Needless to say, it won't boot anymore. The simple question is: is there a way to access the bios boot block to recover the bad flash with a crisis disk? I know that the MINI and the ALIENWARE models have this feature, but I can't seem to find anything about it in the Vostro machines. Any help will be much appreciated. PS: Dell's solution is to change the motherboard, but it will take several days, as the board isn't available in my country :( Regards, Deadmilkman

  Read the article

• After installing Windows 8, boot hangs before BIOS setup

  - by Joe Purvis

  I have an Alienware M15x, 940MX processor, 16 GB RAM, 512GB M4 SSD, and I was running Win7 64bit. I backed up the disk and ran Win 8 setup. Setup appeared to go well through multiple reboots. After the last reboot, it simply stopped after POST at "Press F2 for bios setup". I have tried powering off, reducing RAM to one stick, removing MOS battery. Now, it gets to the screen with "Press F2 for setup" and "Press F12 for boot options". If I press F2, I get a single beep only. If I press F12, nothing. I cannot get into the BIOS to change boot options to boot from another disk and restore. I do have the latest BIOS. I am going to try replacing the CMOS battery, but I don't think that is likely to help. The computer has been fast and very reliable until now.

  Read the article

• samsung NP530 laptop cannot enter bios setup

  - by Tony

  Hi my friend has a samsung NP530U3C and he has changed the bios to CSM only now it stuck on a loop and will not boot up, the options "F2 setup" "F4 recovery" are there but they do nothing.I have a bootable USB with win 8 that "installs" right up to restart then....back to the loop or in stall.Please can some one help its been driving me mad i just need to get tothe bios and change it back to EFI/CSM. Thanks.

  Read the article

• Laptop Bios password removing !!

  - by Mr-Right

  hi, I have a dell D620 (Laptop), My younger brother set password by mistake on BIOS Setup and forgot it. Now I want to reset BIOS Setup program so that password can be reset.Any other alternative is appriciated as well. thanks in advance.

  Read the article

• Removing the BIOS password on a Dell Laptop

  - by Mr-Right

  I have a Dell D620 laptop. My younger brother set password by mistake on BIOS Setup and forgot it. Now I want to reset BIOS Setup program so that password can be reset.Any other alternative is appreciated as well. Thanks in advance.

  Read the article

• "Bios Not fully ACPI compatible"

  - by C. Ross

  Why would a computer that has been working for month's suddenly start having a "Bios not fully ACPI compatible" blue screen error, when the bios has not changed?

  Read the article

• Booting from USB when BIOS doesn't support it?

  - by Dexter

  I'm pretty sure my BIOS doesn't support booting from a flash drive. I know my flash drive is bootable and already has installed Ubuntu on it. Is there any way to get my computer to boot from the flash drive without flashing the BIOS?

  Read the article

• Motherboard jumper setting: BIOS flash write protection.

  - by Wesley

  I have an ECS P4M800PRO-M478 motherboard and I'm just setting up the jumpers right now, of which there are only two sets. One is the CLR_CMOS jumper, which is set to Normal, of course. However, there is another set called BIOS_WP which controls whether BIOS flash writing is protected or unprotected. Which setting should I have it set at and would this affect any BIOS flashes in the future?

  Read the article

• After Windows 8 installation I can't access BIOS settings anymore

  - by Diogo

  Today I installed Windows 8 Consumer Preview on one of my notebook machines and I noticed that I can't access BIOS settings if I use the "Shut down" Windows option on Settings/Power menu. If I use the "Restart" option, my BIOS allow me to enter on it's settings over "F2" again. Is this happening to someone else? I looked over Windows 8 oficial forum and couldn't find such event. Is this something foreseeable to the new Windows 8?

  Read the article

• Windows 7 detects DVD, BIOS doesn't [duplicate]

  - by frankie3

  This question already has an answer here: Asus UEFI/BIOS options - How to boot from DVD? 2 answers That's what's happening, my Windows 7 detects the DVD and i can read and burn DVDs and CDs but if I want to boot from DVD in BIOS, DVD doesn't appear. It appears my SSD, my HD, my pendrive... all except DVD :( My motherboard is: http://es.gigabyte.com/products/page/mb/ga-z87x-ud4hrev_10

  Read the article

• Enabling AHCI in BIOS for SSD

  - by Robert

  I am trying to help a friend with a desktop upgrade. It is an old machine with an Intel DG31 main board. The board has 1 IDE port to which a DVD-ROM drive is connected, and 2 SATA ports. 1 SATA port had a hard drive with XP on it. I have made that the secondary drive now and wiped the OS as requested, so it is just for data. The new SSD has been installed but I read that for best results one must enable AHCI in the BIOS? So I checked and in the BIOS there is a SATA Mode setting with 2 options - Native and Legacy. I think Native means AHCI? After setting to Native, I installed Windows 7 Home Premium and all the latest drivers from Intel's website and all Windows Updates. Now when I check Device Manager I see this: Also Microsoft says HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start and HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV\Start should have value 0 for AHCI but I see that the value is 3 for both. So does this mean that Native mode is not AHCI? Or Windows 7 ignored BIOS setting and installed in IDE mode, maybe because both cables are present? Please help me enable AHCI on this system. Thanks!

  Read the article

• K8NDRE motherboard in server fails to complete BIOS load with error 0078

  - by John

  K8NDRE motherboard with 4 sata drives, was running fine. Drives had raid-0 and raid-1 partitions, using mdadm. The onboard raid is disabled. Upon reformatting the drives, setting a new partition structure and new raid partitions, the bios fails to finish loading, with 0078 in the bottom right corner. Tried using completely new set of drives, and bios worked fine. Able to boot from a usb, format the drives, partition them, start raid, and then installed os. Reboot and received the same error from the bios, 0078. Works fine if I unplug the sata drives. Any thoughts? Physical inspection reveals no damage cables, connectors, or capacitors. Server was running happily for over a year, and this is the first problem it has had. Per Michael Hampton's answer: The drives, unjumpered and supporting sata III worked fine originally, and worked fine for formatting and having new partitions and raid installed on them. I did try jumpering one, with no change. If I put a brand new unformatted drive in, the motherboard recognizes it and I can proceed with formatting and installing. When I reboot, I get the 0078. I have 4 sata cables-the board supports 4 drives, so I tried each and no change. I am close to calling the motherboard done.

  Read the article

• BIOS flash XP, 1 long beep, 2 short beeps, over&over

  - by Paul

  BIOS issue on HP dv9233cl laptop, wiped drive of Vista, loaded XP, not all the drives loaded. Went to the HP website, downloaded all drivers for this laptop. Started loading them. Loaded WIN Flash HP Network System BIOS Window SP42187. After a minute a low resolution screen appeared stating "It is now safe to turn off the computer" I waited a minute and half. Turned it off. Let it set 10 seconds try to start and No screen images at all and a nasty loud long beep 2 short beeps, 2 seconds of silence and it happens over & over again. I have unplugged/removed battery, still same problem, Any sugg.... Thx.. Paul

  Read the article

• fedora 11 server won't boot from SATA disk, won't boot from CD, BIOS configuration problems

  - by Tom

  Hi all, Yesterday our fc11 file/print server didn't boot, and had stopped on the BIOS page with a configuration problem. (with a distinct lack of foresight) I reset the BIOS settings to default without recording the message and booted the server. The server ran until it was to be booted this morning, and it was failing to mount the root partition from the SATA disk. It also failed to boot from a known good diagnostics CD. After a few more tries, it now fails part way through the Phoenix - AwardBIOS screen where it is listing the SATA/IDE devices, and it is showing garbage for the identity of one of the disks, which should actually be "none" It looks like the motherboard has gone kaput. The motherboard is an EVGA NF790i, are there any diagnostic tools that I can use to determine this? (as I would prefer to not send the motherboard back, only to discover that it is the RAM or the CPU) ps I can't get it to boot from the memTest disk, so I can't run that diagnostic. Thanks!

  Read the article

• Find BIOS update for HP Pavilion xt966

  - by NitroxDM

  I installed FreeNAS on a HP Pavilion xt966. Every three seconds or so I message comes up on the console. acpi_tz0: _TMP value is absurd, ignored (-270.2C) From what I have been able to find this is because of a bug in the BIOS... but I have yet to find an update for it. HP's site only shows drivers. FreeNAS is build on BSD. Anyone know where to find a BIOS update for this unit?

  Read the article

• My HP Laptop shows bios error

  - by Precious Tijesunimi

  Sometimes, when I startup my HP Laptop I get a message like this (I am not accurately sure of the message but it is something like this) HP Bios Startup error The selected bios file was not found. It is either corrupt or missing Please visit http://hp.com/go/techcenter/startup Please Press ENTER - to Continue. When I press enter nothing bad happens, My System Just starts up normally. I have had a similar problem with my desktop but whenever I press enter, The computer restarts and doesn't startup. I was told that a Virus had attacked my system. I am very worried. Is the same thing happening here?, How will it affect my system? and What can I do?

  Read the article

• Remote access to BIOS?

  - by j-g-faustus

  I have a home server running headless (i.e. without a monitor), using ssh for remote access. This works fine most of the time, but I still need a graphics card and still need to drag out a monitor whenever I have to access BIOS, (re-)install the OS and similar. I know that there are business servers that let you control everything remotely (over Ethernet), including power up and BIOS access. Is this type of functionality available for "prosumer" class hardware? If so, where does it sit - should I look for motherboard support, a PCI-e card or an external device? And does this type of functionality have a name, so I know what to google for?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >