Search Results

Search found 15966 results on 639 pages for 'connection'.

Page 3/639 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Ethernet connection for Internet

    - by user103173
    I have just installed the Ubuntu 11.10 and facing challenges connecting to Internet using Ethernet connection. Below is the configuration details: IP address: 172.19.40.16 Subnet mask: 255.255.255.0 Default gateway: 172.19.40.1 When I run the command ifconfig I don't find the IP address in inet addr: Even when I try to change the Network device to "Ethernet" in Network tools, the changes are not getting saved. Please help. Let me know if you want further information.

    Read the article

  • WiFi connected to router, but no internet connection

    - by Quetzacotl
    I just got a new notebook, a ThinkPad Edge E530, and installed Ubuntu on it. I'm pretty new to Ubuntu. On the same laptop, running Windows 7, the Wi-Fi connection works fine. Ethernet connection works both on Win7 and on Ubuntu. Only Wi-Fi on Ubuntu does not work; it connects to the Wi-Fi access point but I don't have Internet access. My wireless card is Intel Centrino Wireless-N 2230. What can fix the problem? EDIT: ifconfig -a eth0 Link encap:Ethernet HWaddr b8:88:e3:30:72:34 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:163 errors:0 dropped:0 overruns:0 frame:0 TX packets:163 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10124 (10.1 KB) TX bytes:10124 (10.1 KB) usb0 Link encap:Ethernet HWaddr 02:15:e0:ec:01:00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 68:5d:43:43:71:e1 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::6a5d:43ff:fe43:71e1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2801 (2.8 KB) TX bytes:26230 (26.2 KB) route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 127.0.0.1 iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"SATELITE" Mode:Managed Frequency:2.462 GHz Access Point: 00:1F:1F:8D:CC:08 Bit Rate=1 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=60/70 Signal level=-50 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:93 Invalid misc:243 Missed beacon:0 eth0 no wireless extensions.

    Read the article

  • How to use a Network adapter only for a specific Connection on Win7?

    - by Tokk
    Hey, Guys I've got several network adapter in my PC (from LAN, WLAN, VPN etc...) and what I want to accomplish is that some specific adresses use the VPN adapter, while all others use eiter LAN or WLAN. (So for example http://win-server/ is using VPN, while www.google still uses LAN connection.) I've want to solve this with the Windows settings and not the VPN settings to make sure I can do it with every VPN-Provider. Thank You

    Read the article

  • How to stabilize a disconnecting internet connection?

    - by All
    My internet connection is very interrupting, but it is not sensible for web surfing, as the connection dies for a few seconds and everything is OK. The IP is NOT changing, and just a halt in data transfer. However, it is very annoying for applications needing contact connection like SSH. Since it seems disconnection, SSH closes. Is there any way to stabilize this kind of interrupting connection to keep the connection with zero transfer data to persevere any connection like SSH? I am using Linux (Debian/Ubuntu).

    Read the article

  • iphone app crashing when url connection connection timed out is coming

    - by satyam
    I'm creating iphone app. In that, when the app starts, it connects to server and downloads few images and then proceeds with app. When app is downloading, it will show the initial splash screen. as long as my server is able to ping my iphone, its working well. but the trouble starts when my server is taking much time to respond for the NSURL request. The app is crashing with following error: Mon May 14 13:56:34 unknown Springboard[24] <Warning>: com.xxxx.xxx failed to launch in time I understood that when such issues happen with application, iphone crashes the appliation. I would like to know how much max time iphone allows app to respond to such instances. Is there any max value for that?

    Read the article

  • Wireless Connected But No Internet Connection (Ubuntu 12.04)

    - by Zxy
    I am using same network for 2 days and everything was normal. However, today even though it shows me as connected to the network, I do not have internet connection. If I use ethernet cable instead of wireless, I am still able to connect to the internet. Also my friends are able to connect to the wireless network and they can get internet connection. I did not update or install anything since yesterday. Therefore I do not have any idea why it is happening. Here is some information about my connection: I will be appreciate to any kind of help. root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 hid 77367 2 hid_logitech_dj,usbhid ideapad_laptop 17890 0 sparse_keymap 13658 2 acer_wmi,ideapad_laptop lib80211_crypt_tkip 17275 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event wl 2646601 0 wmi 18744 1 acer_wmi i915 414672 3 drm_kms_helper 45466 1 i915 snd_timer 28931 2 snd_pcm,snd_seq mac_hid 13077 0 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq lib80211 14040 2 lib80211_crypt_tkip,wl drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 snd 62064 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_se q,snd_timer,snd_seq_device video 19068 1 i915 mei 36570 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp atl1c 36718 0 root@ghostrider:/etc/resolvconf# nm-tool NetworkManager Tool State: connected (global) - Device: eth1 [PoliTekno] ---------------------------------------------------- Type: 802.11 WiFi Driver: wl State: connected Default: yes HW Address: AC:81:12:7F:6B:B2 Capabilities: Speed: 54 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) CnDStudios: Infra, 00:12:BF:3F:0A:8A, Freq 2412 MHz, Rate 54 Mb/s, Strength 85 WPA AIR_TIES: Infra, 00:1C:A8:6E:84:32, Freq 2462 MHz, Rate 54 Mb/s, Strength 72 WPA2 VKSS: Infra, 00:E0:4D:01:0D:47, Freq 2452 MHz, Rate 54 Mb/s, Strength 62 WPA2 PROGEDA: Infra, 00:1A:2A:60:BF:61, Freq 2462 MHz, Rate 54 Mb/s, Strength 47 WPA MobilAtolye: Infra, 72:2B:C1:65:75:3C, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 AIRTIES_WAR-141: Infra, 00:1C:A8:AB:AA:48, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 tilda_biri_yeni: Infra, 54:E6:FC:B0:3C:E9, Freq 2437 MHz, Rate 0 Mb/s, Strength 34 WEP *PoliTekno: Infra, 00:16:E3:40:C3:E4, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WPA2 AIRTIES_RJY: Infra, 00:1A:2A:BD:85:16, Freq 2462 MHz, Rate 54 Mb/s, Strength 55 WEP IPv4 Settings: Address: 0.0.0.0 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: F0:DE:F1:6C:90:65 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off root@ghostrider:/etc/resolvconf# sudo iwlist scan lo Interface doesn't support scanning. eth1 Scan completed : Cell 01 - Address: 00:16:E3:40:C3:E4 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-48 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: 00:E0:4D:01:0D:47 ESSID:"VKSS" Mode:Managed Frequency:2.452 GHz (Channel 9) Quality:4/5 Signal level:-64 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Cell 03 - Address: 00:1C:A8:AB:AA:48 ESSID:"AIRTIES_WAR-141" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-77 dBm Noise level:-95 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DDB20050F204104A0001101049001E007FC5100018DE7CF0D8B70223A62711C18926AC290E30303030303139631044000102103B0001031047001076B31BC241E953CB99C3872554425A28102100194169725469657320576972656C657373204E6574776F726B73102300074169723534343010240008312E322E302E31321042000F4154303939313131383030323832351054000800060050F20400011011000741697235343430100800020084103C000103 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 04 - Address: 72:2B:C1:65:75:3C ESSID:"MobilAtolye" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-78 dBm Noise level:-92 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: Unknown: DDA20050F204104A0001101044000102103B00010310470010BC329E001DD811B28601722BC165753C1021001D48756177656920546563686E6F6C6F6769657320436F2E2C204C74642E1023001C48756177656920576972656C6573732041636365737320506F696E74102400065254323836301042000831323334353637381054000800060050F204000110110009487561776569415053100800020084103C000100 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 12 Mb/s 24 Mb/s; 48 Mb/s Cell 05 - Address: 00:12:BF:3F:0A:8A ESSID:"CnDStudios" Mode:Managed Frequency:2.412 GHz (Channel 1) Quality:5/5 Signal level:-47 dBm Noise level:-95 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 06 - Address: 00:1C:A8:6E:84:32 ESSID:"AIR_TIES" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-56 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 07 - Address: 54:E6:FC:B0:3C:E9 ESSID:"tilda_biri_yeni" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-85 dBm Noise level:-99 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Cell 08 - Address: 18:28:61:16:57:C3 ESSID:"obilet" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-88 dBm Noise level:-99 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 09 - Address: 00:1A:2A:60:BF:61 ESSID:"PROGEDA" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-75 dBm Noise level:-98 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s eth0 Interface doesn't support scanning.

    Read the article

  • Folding at home refusing connection?

    - by user49191
    I am having a slight problem. I love contributing to folding at home, if some of you dont know what it is, it's a program that downloads work from the stanford university servers, has your computer process it (takes about 12 hours for 1 assignment depending on the processor, and then uploads it back. The problem with mine is that when I run FAHControl in terminal, it says Error 111 connection refused. This doesnt happen when i run folding at home on windows. Can someone tell me how to fix this? Thanks.

    Read the article

  • System update and now no wireless connection in Ubuntu 10.04

    - by Alphaeuphemia
    I'm running an older version of Ubuntu (10.04), and updated yesterday through the update manager. The system informed me I needed to restart, so I did, then immediately shut down the system and went to work. When I rebooted later in the evening, I couldn't connect to my wireless router. I could find my connection and had the passcode and all that usual business, but could this be a kernel or driver issue caused by the update? If so, how can I fix it? I've attempted to go through the troubleshooter, but to no avail. Additionally, I put off upgrading to the next stage of Ubuntu for so long that I can no longer prompt the system to ask me if I'd like to. Any way to change this?

    Read the article

  • wired connection not working in ubuntu 12.04 on lenovo G580 laptop

    - by shravankumar
    I found solution in http://www.zyxware.com/articles/2680/solved-wired-connection-eth0-not-detected-in-ubuntu-12-04 I downloaded compact-wireless-2012-07-03-p.tar.bz2 Here the steps i followed along with output 1. shravankumar@shravankumar-Lenovo-G580:~/Desktop/compat-wireless-2012-07-03-p$ scripts/driver-select alx Output: Processing new driver-select request... Backup exists: Makefile.bk Backup exists: Makefile.bk Backup exists: drivers/net/ethernet/broadcom/Makefile.bk Backup exists: drivers/net/ethernet/atheros/Makefile.bk Backup exists: Makefile.bk Backup exists: Makefile.bk Backup exists: drivers/net/ethernet/broadcom/Makefile.bk 2.shravankumar@shravankumar-Lenovo-G580:~/Desktop/compat-wireless-2012-07-03-p$ make output: make -C /lib/modules/3.2.0-23-generic/build M=/home/shravankumar/Desktop/compat-wireless-2012-07-03-p modules make[1]: Entering directory `/usr/src/linux-headers-3.2.0-23-generic' scripts/Makefile.build:44: /home/shravankumar/Desktop/compat-wireless-2012-07-03-p/drivers/net/ethernet/atheros/alx/Makefile: No such file or directory make[4]: *** No rule to make target `/home/shravankumar/Desktop/compat-wireless-2012-07-03-p/drivers/net/ethernet/atheros/alx/Makefile'. Stop. make[3]: *** [/home/shravankumar/Desktop/compat-wireless-2012-07-03-p/drivers/net/ethernet/atheros/alx] Error 2 make[2]: *** [/home/shravankumar/Desktop/compat-wireless-2012-07-03-p/drivers/net/ethernet/atheros] Error 2 make[1]: *** [_module_/home/shravankumar/Desktop/compat-wireless-2012-07-03-p] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.2.0-23-generic' make: *** [modules] Error 2 3. hravankumar@shravankumar-Lenovo-G580:~/Desktop/compat-wireless-2012-07-03-p$ make install output: FATAL: Could not open /lib/modules/3.2.0-23-generic/modules.dep.temp for writing: Permission denied make: *** [uninstall] Error 1 4. shravankumar@shravankumar-Lenovo-G580:~/Desktop/compat-wireless-2012-07-03-p$ modeprobe alx output: No command 'modeprobe' found, did you mean: Command 'modprobe' from package 'module-init-tools' (main) modeprobe: command not found I am new to Ubuntu ,Please help me. Thanks in advance

    Read the article

  • Connection timeout when accessing Github

    - by Felipe Micaroni Lalli
    I have exactly the same problem as described here: http://stackoverflow.com/questions/12849986/connection-timeout-when-accessing-github So I'll just copy & paste: I have some weird problems. When I try to log in my Github account, I get a "net::ERR_EMPTY_RESPONSE" error. I tried with Chrome, Firefox and Opera. In Firefox, if a clean the cache and offline data, it works for a while. Then I can log in, but I still can't create a Github repository, even if I clear the cache again. My friend, in the same network, with Windows, can do whatever he wants on Github's web site, but I can't. I tried many DNS servers, I tried not to set it (my friend doesn't), but it's still not working. My OS: Ubuntu x64 12.04 Ideas, please. And thanks. Also, I can clone any repo but I can't push. I had to change to https://codeplane.com/ due to this problem, but I want to understand why it happens. EDIT: I could clone one repo, but the other one just hangs at this point: felipelalli@felipelalli-Studio-XPS-8100:~/wa$ git clone [email protected]:felipelalli/micaroni.git Cloning into 'micaroni'... remote: Counting objects: 5238, done. remote: Compressing objects: 100% (3257/3257), done. Receiving objects: 92% (4839/5238), 43.29 MiB | 902 KiB/s

    Read the article

  • Mouse doesn't work & internet connection not made in Ubuntu 12.04 LTS

    - by David Skare
    Yesterday, Nov 15, 2012, I booted into my Ubuntu 12.04 LTS system. It has resided on a Crucial 128 GB SSD with about 90% free space since early summer. I also have Windows 7 loaded on another Crucial 256 GB SSD. Ubuntu has set up a dual boot system for me even though each OS has its own SSD. I have been using this setup without problems since summer. Yesterday, when the boot process finished, my Microsoft Comfort Mouse 3000 did not work and there was a message that Ubuntu was not connected to the internet. So w/o the mouse I was forced to turn the machine off manually. About 4 days ago Ubuntu worked fine and booting into Win 7 also works fine. I have a backup machine with the same style mouse on it so I swapped the mouse onto this system. Same results. But both mice work when booting into Win 7. Today I removed both SSDs and installed my Ubuntu 12.04 HD which has not been used since I moved Ubuntu to the SSD from it. Same results. Between the last time I used Ubuntu 12.04 on the SSD and when I tried to use it again I made no changes to my machine, either hardware or software. My machines specs are: AMD FX-6100, MSI 990FXA-GD65 AM3+ format with latest BIOS (Ver 19.9), Corsair Vengeance 1866 MHz memory - 16 GB (4GB X 4 sticks), MSI N580GTX video card (nVidia 306.97 drivers), Sony Bravia 32" HD TV as a monitor, Pioneer BluRay DVD-RW, DSL connection to internet thru a router (10 mps), Crucial 128 GB SSD (90% free space), Microsoft Comfort Mouse 3000 I try to maintain current BIOS and drivers for all devices. I mostly use my Ubuntu system for programming in GCC and OpenCOBOL, surfing the internet and e-mailing. No games are installed. I'm stumped! If anyone has experienced this same problem I'd appreciate knowing how you solved it. TIA, Dave

    Read the article

  • ZTE USB Modem AC2736, connection not possible in Ubuntu 12.04.1 LTS

    - by Fredo
    It's a long post but nearly covers all my experiments and changes I did to my NM. Hope the information is complete and if there are still question, more information can be provided. I've a ZTE AC2736 USB Modem (CDMA modem) which worked fine in Ubuntu 10.04 /11.10. I recently switched to 12.04.1 (precise pangolin). after the switch the first issue I faced was to connect to internet using my USB modem (ISP: Reliance Brand: Netconnect). Tried to run the drivers provided by Reliance but they are old and won't support Kernel 2.6.30 above. since the code was not downloaded with ISO image (of 12.04) i couldn't compile the files provided in such driver. lsusb does detect it as Modem with output similar to 19d2:fff1 ZTE CDMA technologies inc. (or similar as i didn't note it down) If it is detected as USB storage it shows 19d2:fff5 (as per few online forums, i may be wrong here). I used the network Manager and configured the modem to dial #777 (default) and the ISP provided username:password combination. It tries to connect to internet (3-4 times automatically)but fails to get online. once I was able to connect in the monring hours and the message was flashed 'registered on CDMA home network'. I was able to run an update. the kernel was updated with 3.0.2 -pae OR something similar (can find out if required). I surfed the net for about 2 hours later before restarting. After the restart, again the Modem was not able to get me online. I kept trying for many times. I tried changing the setting in NM. One evening after dark I was able to connect to network with same message flash 'registered on CDMA home network' (the message was similar, i'm not precise here,sorry). I was able to surf the net for nearly 3 hours before I switched off my Laptop. I'm not able to get online after that day, It's been 3 days now. I'll try the observered theory of late/early hours sometime soon as mentioned below. Laptop configuration : Make: Lenovo Model: B480 Processor: Intel B950 RAM: 4G DDR3 HDD: 500 G Broadcom Wireless/Bluetooth/Ethernet LAN OS: FreeDOS / Ubuntu 12.04 LTS (dualboot) Kernel 3.0.2-pae Obeservation : I'm able to connect to internet in those hours when generally the speed is high (low usage by other network (wireless) users). like in early mornings or late nights. This is strange as connection should not be dependent on bandwidth usage. Any help would be appraciated to fix this issue. before I decide to cahnge the OS or ISP.

    Read the article

  • Software to Monitor the Stability of Internet Connection

    - by Ngu Soon Hui
    Thanks to the excellent internet connection service offered by one of the best ISP in the world, the internet connection in my area is very, very unstable. I can connect some of the time, but MOST of the time the connection will just drop off ( with the error message unable to resolve host) and after a few minutes, it will resume back. If I ping the domain name directly (i.e., ping www.google.com -t in cmd command), I will get a cannot ping message. Because of the flickery nature of the connection, it's pretty hard to prove to the support staff that internet connection is unstable. So I am thinking about using one software to record down the connection situation, so that I can present to the technical staff and make sure that they have no excuse not to fix my problem. Any such software available? Edit: Of course, such software should not record my browsing habit, and must be able to monitor and record the internet connection condition even when I am not online.

    Read the article

  • 13.10 - Weird WiFi connection problems - WMP300N - Broadcom BCM4321

    - by user1898041
    Just installed 13.10 on my desktop and I really like it. After having problems with getting the wifi to work, I installed it connected to the internet with an ethernet cable and added in the 3rd party software and updates as per the installation procedure. After installation was completed, I saw the wifi icon in the upper right hand corner, but it was not seeing any wifi networks. Some Googling brought me to use the 'Additional Drivers' application. It found the WMP300N Broadcom BDM4321 based pci wifi card and installed the proprietary Broadcom STA wireless driver, which may have been installed before. I'm not sure. Here is the weird part: when I start my system, wifi seems to be in some sort of suspended state where the system sees that the card exists but the card will not detect any wifi networks. It will work after booting once I 'Additional Drivers' application and then start FireFox. I know it seems weird, but this is the process I've got down to get the card to recognize wifi networks. After those applications are open for a few seconds, the card starts to function like normal (although maintaining the wifi connection is problem but most likely a seperate issue). The reason this is a problem is because this is supposed to just be a headless box managed through SSH. Here are the readouts from the common network diagnosis programs BEFORE I open 'Additional Drivers' and 'FireFox'. All commands were done with sudo. lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) - iwconfig eth1 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off - iwlist scan eth1 No scan results - Here are the various commands AFTER I open 'Additional Drivers' and 'FireFox' lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.103 latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:85 errors:0 dropped:0 overruns:0 frame:11901 TX packets:132 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52641 (52.6 KB) TX bytes:19058 (19.0 KB) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6084 (6.0 KB) TX bytes:6084 (6.0 KB) - iwconfig eth1 IEEE 802.11abg ESSID:"BU" Mode:Managed Frequency:2.447 GHz Access Point: 00:26:F2:1F:81:02 Bit Rate=54 Mb/s Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=59/70 Signal level=-51 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 - iwlist scan A LOT OF SSIDs FOUND! - I'd like to have this problem fixed, but I'm not quite sure where to go. Been Googling a lot and can't seem to find anyone else with this problem.

    Read the article

  • Docking Station Disabling/Enabling Network Connection

    - by bryan_cook
    Whenever I dock my laptop onto my docking station, Windows disables my Wireless Network Connection and enables my Wired Network Connection. Whenever I undock my laptop, Windows disables my Wired Network Connection and enables my Wireless Network Connection. Is there a way to disable this feature? After Windows performs the automatic disabling/enabling, I run into errors when I try to disable the now-enabled connection, specifically "It is not possible to disable the connection at this time. This connection may be using one or more protocols that do not support Plug-and-Play, or it may have been initiated by another user or the system account." I'm assuming the latter portion of the error is true ... my network connections are being enabled/disabled under a system account. Regardless, I'd just like to disable the feature altogether. For reference, I'm working with Windows XP Professional on a Dell Latitude D630. Thanks in advance!

    Read the article

  • Selecting primary Internet connection in Windows XP

    - by Mariusz
    There is a computer that has access to the Internet both via the local network and by a GSM modem. As far as I know, when both connections are active, the modem connection is the primary one and all data is transmitted by the modem. Because of the fact that the slow modem connection is supposed to be used as a backup connection, I want Windows to use it only when the connection via LAN is unavailable. At the same time I want the GSM modem connection to be active constantly. Is it possible to make Windows not use modem connection when there is a working LAN Internet connection? Thanks for your help in advance, Mariusz.

    Read the article

  • Sql Server 2005 Connection Unstable When Sharing Connection

    - by intermension
    When connecting to a customers hosting service via Sql Server Management Studio on an internet connection that also has other activity on it, the Sql Server connection to the hosting service is often dropped. An obvious work around to this problem is to NOT have additional traffic on the connection but it still begs the question "Why the Sql Server connection is so unstable?". If there is, for arguments sake, 100kb of bandwidth and a couple of downloads running that are being serviced at 35kB each then there is 30kB bandwidth spare capacity. If a 3rd download is started, that can be serviced at 35kB by the server, it will top out at 30kB and leave zero spare capacity. This is fine and all downloads get along nicely. However it seems that with Sql Server connections it doesn't matter if there is spare bandwidth. Sql Server regularly times out if there is any additional activity on the connection even if i have 1024kB spare bandwidth capacity. This has been experienced across different customer hosting providers over the years and so the assumption is that it's Sql Server related. Why does Sql Server (apparently) require exclusive access to the internet connection in order to maintain a connection... even if that connection has plenty of spare capacity over and above any additional activity on the connection?

    Read the article

  • Basic question on Internet Connection Sharing

    - by Apps
    I've basic question on Internet Connection Sharing in Windows XP. I've a Internet Connection through LAN and I've created an Ad-hoc network that is supposed to share the internet connection. My question is on which connection should I enable "Internet Connection Sharing"? Is it on LAN Connection'Settings > Advanced of Ad-hoc network Connections' Settings > Advanced ? Can you please help me?

    Read the article

  • The wireless connection could not be detected by other computer

    - by Rienna
    i tried to configure router pc in my linux ubuntu 10.04 . I use 2 connection to connect 2 client. 1st computer use LAN connection and 2nd use wireless connection. when i make new wireless connection in my ubuntu, the wireless that i make could not be detected by other computer that use wireless connection.i have tried to use windows and ubuntu as a client but it doesn't work. Maybe there's someone who know about it. Please share :)

    Read the article

  • A New Threat To Web Applications: Connection String Parameter Pollution (CSPP)

    - by eric.maurice
    Hi, this is Shaomin Wang. I am a security analyst in Oracle's Security Alerts Group. My primary responsibility is to evaluate the security vulnerabilities reported externally by security researchers on Oracle Fusion Middleware and to ensure timely resolution through the Critical Patch Update. Today, I am going to talk about a serious type of attack: Connection String Parameter Pollution (CSPP). Earlier this year, at the Black Hat DC 2010 Conference, two Spanish security researchers, Jose Palazon and Chema Alonso, unveiled a new class of security vulnerabilities, which target insecure dynamic connections between web applications and databases. The attack called Connection String Parameter Pollution (CSPP) exploits specifically the semicolon delimited database connection strings that are constructed dynamically based on the user inputs from web applications. CSPP, if carried out successfully, can be used to steal user identities and hijack web credentials. CSPP is a high risk attack because of the relative ease with which it can be carried out (low access complexity) and the potential results it can have (high impact). In today's blog, we are going to first look at what connection strings are and then review the different ways connection string injections can be leveraged by malicious hackers. We will then discuss how CSPP differs from traditional connection string injection, and the measures organizations can take to prevent this kind of attacks. In web applications, a connection string is a set of values that specifies information to connect to backend data repositories, in most cases, databases. The connection string is passed to a provider or driver to initiate a connection. Vendors or manufacturers write their own providers for different databases. Since there are many different providers and each provider has multiple ways to make a connection, there are many different ways to write a connection string. Here are some examples of connection strings from Oracle Data Provider for .Net/ODP.Net: Oracle Data Provider for .Net / ODP.Net; Manufacturer: Oracle; Type: .NET Framework Class Library: - Using TNS Data Source = orcl; User ID = myUsername; Password = myPassword; - Using integrated security Data Source = orcl; Integrated Security = SSPI; - Using the Easy Connect Naming Method Data Source = username/password@//myserver:1521/my.server.com - Specifying Pooling parameters Data Source=myOracleDB; User Id=myUsername; Password=myPassword; Min Pool Size=10; Connection Lifetime=120; Connection Timeout=60; Incr Pool Size=5; Decr Pool Size=2; There are many variations of the connection strings, but the majority of connection strings are key value pairs delimited by semicolons. Attacks on connection strings are not new (see for example, this SANS White Paper on Securing SQL Connection String). Connection strings are vulnerable to injection attacks when dynamic string concatenation is used to build connection strings based on user input. When the user input is not validated or filtered, and malicious text or characters are not properly escaped, an attacker can potentially access sensitive data or resources. For a number of years now, vendors, including Oracle, have created connection string builder class tools to help developers generate valid connection strings and potentially prevent this kind of vulnerability. Unfortunately, not all application developers use these utilities because they are not aware of the danger posed by this kind of attacks. So how are Connection String parameter Pollution (CSPP) attacks different from traditional Connection String Injection attacks? First, let's look at what parameter pollution attacks are. Parameter pollution is a technique, which typically involves appending repeating parameters to the request strings to attack the receiving end. Much of the public attention around parameter pollution was initiated as a result of a presentation on HTTP Parameter Pollution attacks by Stefano Di Paola and Luca Carettoni delivered at the 2009 Appsec OWASP Conference in Poland. In HTTP Parameter Pollution attacks, an attacker submits additional parameters in HTTP GET/POST to a web application, and if these parameters have the same name as an existing parameter, the web application may react in different ways depends on how the web application and web server deal with multiple parameters with the same name. When applied to connections strings, the rule for the majority of database providers is the "last one wins" algorithm. If a KEYWORD=VALUE pair occurs more than once in the connection string, the value associated with the LAST occurrence is used. This opens the door to some serious attacks. By way of example, in a web application, a user enters username and password; a subsequent connection string is generated to connect to the back end database. Data Source = myDataSource; Initial Catalog = db; Integrated Security = no; User ID = myUsername; Password = XXX; In the password field, if the attacker enters "xxx; Integrated Security = true", the connection string becomes, Data Source = myDataSource; Initial Catalog = db; Integrated Security = no; User ID = myUsername; Password = XXX; Intergrated Security = true; Under the "last one wins" principle, the web application will then try to connect to the database using the operating system account under which the application is running to bypass normal authentication. CSPP poses serious risks for unprepared organizations. It can be particularly dangerous if an Enterprise Systems Management web front-end is compromised, because attackers can then gain access to control panels to configure databases, systems accounts, etc. Fortunately, organizations can take steps to prevent this kind of attacks. CSPP falls into the Injection category of attacks like Cross Site Scripting or SQL Injection, which are made possible when inputs from users are not properly escaped or sanitized. Escaping is a technique used to ensure that characters (mostly from user inputs) are treated as data, not as characters, that is relevant to the interpreter's parser. Software developers need to become aware of the danger of these attacks and learn about the defenses mechanism they need to introduce in their code. As well, software vendors need to provide templates or classes to facilitate coding and eliminate developers' guesswork for protecting against such vulnerabilities. Oracle has introduced the OracleConnectionStringBuilder class in Oracle Data Provider for .NET. Using this class, developers can employ a configuration file to provide the connection string and/or dynamically set the values through key/value pairs. It makes creating connection strings less error-prone and easier to manager, and ultimately using the OracleConnectionStringBuilder class provides better security against injection into connection strings. For More Information: - The OracleConnectionStringBuilder is located at http://download.oracle.com/docs/cd/B28359_01/win.111/b28375/OracleConnectionStringBuilderClass.htm - Oracle has developed a publicly available course on preventing SQL Injections. The Server Technologies Curriculum course "Defending Against SQL Injection Attacks!" is located at http://st-curriculum.oracle.com/tutorial/SQLInjection/index.htm - The OWASP web site also provides a number of useful resources. It is located at http://www.owasp.org/index.php/Main_Page

    Read the article

  • Wireless Connection Troubles

    - by James
    I just recently switched from Windows 7 over to Ubuntu 12.04 and have been experiencing some issues connecting to my home's wireless network. The only way I can get it to connect to the network is by disabling IPv4 and IPv6 settings. Even then while it says its connected to the network (3 bars), I'm unable to access the Internet. It connected for a little while after I first installed Ubuntu, but after the first reboot I haven't been able to access the web at all. I have very basic knowledge when it comes to computers and barely any when dealing with Ubuntu and Linux. I'm very happy with Ubuntu apart from this one issue, as before my computer was overheating and crashing, I've yet to experience any of those problems since installing Ubuntu. The information I can give may be very limited since I'm having to use my cell phone to figure out the solution to this. Any help would be greatly appreciated. Thanks in advance!

    Read the article

  • Ubuntu 12.04 Network Connection Unavailable

    - by user211315
    I recently added a EDIMAX EW-7811Un to my computer to allow wireless networking. That was working. Now after a reboot I am unable to connect to either wireless or wired network. the result of ifconfig is ifconfig eth0 Link encap:Ethernet HWaddr bc:ae:c5:46:19:6d inet6 addr: fe80::beae:c5ff:fe46:196d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:231 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:62615 (62.6 KB) Interrupt:51 Base address:0x4000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:664 errors:0 dropped:0 overruns:0 frame:0 TX packets:664 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:52639 (52.6 KB) TX bytes:52639 (52.6 KB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

    Read the article

  • System crashes when internet connection is unplugged

    - by Rincewind
    When i first tried to install any ubuntu newer than 10.04 on my netbook (Acer aspire one 722 11,6" WXGA - C-60 Dual Core APU - AMD Radeon HD 6250 - 1x HDMI - 2GB DDR3 - 320GB - 802.11bgN - 6CELL2.2 - BT 3.0 - VGA Webcam), it would fail to boot. I found out that the only fix to this was linking it to the internet via lan-cable during the installation. However, after installing ubuntu 12.04 successfully my system is crashing everytime i unplug the lan-cable. My first thought was disabling the netbook´s w-lan (via the band at the top) but it was not fixing the problem. Looking on the taskmanager ('top') during the process brought no further insight, no process was exploding or something like that. As i am out of guesses help would be really appreaciated. Lg Rincewind

    Read the article

  • Ubuntu 12.04 LTS - Apple iPad 3 (iOS 7 non-jailbroken) USB connection problem

    - by Eldian
    I've bought an Apple iPad 3 (iOS 7 non-jailbroken), and I'm trying to connect it to my PC running Ubuntu 12.04 through the original USB cable. After I plugged in the cable, I got this message on the PC: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. Slide to unlock on iPad, it's OK, I got this message on the PC again: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. iPad: Trust this computer? TRUST/DON'T TRUST I've selected TRUST. PC: Unable to mount - DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) OK, I've read some forums, everywhere there was this solution: "Install: ifuse, libimobiledevice-utils, Rhythmbox OK, I've installed them through terminal, and used the idevicepair unpair && idevicepair pair command also in the terminal. Then I got this message: Device is not paired with this host. I don't know what to do. Please help!

    Read the article

  • Lose internet connection, yet online games continue

    - by Mike
    For the past week or so, my internet connection has been anything but stable. Restarting my modem/router always fixes the problems, but since it has occurred so often, I'm noticing confusing patterns which I was hoping someone could help answer. My internet connection kicks out about 4-5 times a day. The sure-fire way to fix it is to restart my all-in-one modem/router. Sometimes I can diagnose the problem on my laptop which resets my wireless network adapter and fixes the problem, but not always. If that doesn't fix the problem, it usually reports that the connection between the modem and internet is the problem which requires a restart of the router. The odd thing which baffles me is that my connection is supposedly lost such that no browsers can connect to sites, yet things like online games still continue to play without issue. How is this possible? I thought maybe the game was running locally on my PC but that couldn't be the answer because I was still getting messages from other players. So my real question is: How can my internet browsers (firefox, chrome, even IE) lose connection to the internet, but other applications like online games not? Am I actually losing connection or am I mistaken? Edit: I'd also like to add that netflix on my PS3 which is directly connected to the same access point will also lose connection. So internet browsers and netflix lose their internet connection while online games continue without an issue.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >