Search Results

Search found 654 results on 27 pages for 'hdmi'.

Page 3/27 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• video/audio output via HDMI Ubuntu 12.04

  - by lostNfound

  I've been out of the Ubuntu loop for quite a while now and have a completely new laptop now. Just installed Ubuntu 12.04 64-bit and would like to output my video and my audio via HDMI to my television. the following is the lspci | grep VGA for my computer. please tell me if there is any additional information needed and preferably how to obtain it and i will be more than happy to oblige. thank you in advance for your time and assistance in this matter. 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) Edit: every time i restart my computer, after a short moment, i get an error message stating something along the lines "sorry, jockey needed to close unexpectedly." after researching, i discovered jockey is the name of the "additional drivers," which after initial installation, ubuntu informed me of proprietary drivers available. those are no longer available, and this error continues to occur.

  Read the article

• How do I get HDMI out working on an Acer AC700 HDMI?

  - by Kyle

  I have installed Ubuntu on my Acer AC700 (Chromebook) using both the Cr-48 method and the script method both of which I think are the same. The only thing that does not work is HDMI out. I assume this is because it uses the Chrome OS kernel to boot so I have hoped that eventually it would update and work. I'm currently running 12.04 with Kernel 3.4.0 and still no luck. I've tried booting in recovery for Ubuntu and attempting to get Xorg to generate a new config but I don't know enough to do anything else and that didn't work. Am I the only one out there? Is there no one else who wants this to be possible Any help is greatly appreciated.

  Read the article

• graphics cards with no HDMI output

  - by Noam Gal

  I am currently looking at Gainward GTX260 896MB GS GLH, but I've seen it also on the x275 version - the card doesn't have an HDMI output, only two dvi and one tv out (s-video?). They claim they support HDMI using a dvi-HDMI converter. Will I get a true high definition quality on my TV (assuming it supports it) like that? Or is it not as good, and I should stick to cards that have an HDMI output (ATI), or pay way too much for x295? What about connecting the audio? The x260 comes with an internal spdif cable - does that mean I can connect my soundcard to my graphics card, and have the audio come out through the dvi, and into the HDMI cable? Or am I mixing it all up here, and I have to somehow connect the sound to the TV using a seperate cable (Hoping it has a seperate audio-in for the HDMI channel)?

  Read the article

• No picture on HDMI Output from a Pioneer 921 AV Receiver to a Projector

  - by Alexey Kulikov

  I am trying hard to tackle a what seemed to be simple problem if wiring my setup together. The setup: Mac Mini (2011) with HDMI Output Pioneer 921 K AV Receiver Acer HD Projector (HDMI) When I hook up my Mac Mini directly to the Projector with a 30 foot (10 meter) HDMI Cable everything is just fine. The picture is sharp and the colors brilliant. However, when I send HDMI to the receiver (into the BD HDMI Input) then I get absolutely no HDMI output to the projector, it keeps saying "no signal". Is there perhaps some magic combination of setup buttons that may help me resolve this problem?

  Read the article

• Cannot connect my Ubuntu to TV with HDMI

  - by Hannes Johannes

  Another problem in my way to Ubuntu world.. Trying to make things work Linux way, day 4, problem #5321: I have a Compaq laptop and Nvidia graphic adapter. I also have Panasonic TV, which I thought I could use as a second screen just like I used to to when I was still using Windows Vista with my laptop. Plug the screen to the comp and voilá, I can watch my videos on big screen. And a boll***s I can, not with ubuntu anyways. Nvidia x server (or whatever it's called) does recognize my tv. It's very badly designed gui as I can never be sure has it saved my changes or not (most often not), but I recon I've got that one sorted out. I haven't found a way to set a primary monitor there, but it does see there are two monitors, my laptop and the tv. So far so good. But then? Ubuntu's own monitor setting only sees the laptop screen. If I reboot (with the HDMI cable connected) I end up having a black screen. Then I have to take the cable away, cut the power off and restart the comp.. Please, help, any help would be appreciated! I would so much love to like this linux more than windows but it surely takes a lot of trying...

  Read the article

• Wrong resolution for Lightdm/GDM on Ubuntu 13.04 using HDMI

  - by f03lipe

  I've tried all the solution I could find on the matter so far, but the error persists. My problem is that the login screen (both under gdm and lightdm) runs with the wrong resolution, even though all is fine when I log in. The error occurs solely when I have my HDMI cable connected to my other screen. The login screen resolution becomes 1024x768 (for my 1366x768 laptop screen) and mirrored on my screen, which is 1920x1080. I've had this issue on version 12.04 (the last one before I upgraded to 13.04), but I got it fixed by adding the xrandr commands on the begining of the /etc/gdm/Init/Default file. This doesn't seem to work anymore. I've also tried telling lightdm to run a script fixing the resolution with xrandr (by editing /etc/lightdm/lightdm.conf), but lightdm crashes, and I'm forced to log in with low graphic settigs. Hint: when ubuntu is loading, the resolution starts OK, then goes bad right before the login screen is initialized. Does that mean that there's nothing wrong with my graphic cards? What do you think? Cheers!

  Read the article

• PC -> TV HDMI suddenly doesn't work, any other option does

  - by XSlicer

  So my parents wanted to connect their PC to their TV, so they bought a 10m (35 ft) cable. It all worked perfectly. Then my mom tripped over the cable, breaking it. She somehow got a free replacement, but at the same time some more expensive one from an uncle. Now the problem is that this suddenly doesn't work anymore (TV saying "Format not supported"). I've tried several other things to pinpoint the actual problem, but none brought me something conslusive: PC (hdmi) to TV doesn't work (both cables) PC (hdmi) to TV doesn't work (short cable) Laptop (hdmi) to TV work (same cables) BluRay (hdmi) to TV works (same cables) PC (hdmi) to monitor works (same cables) PC (DVI w/ adapter HDMI) to TV works (same cables) I've tried different ports, tried Linux, reinstalling drivers (the graphics card is internal using an i5 sandy bridge. Normally it's running Windows 7 Home Prem, the TV being a Philips 37PFL7605H). So basically, everything works, except that thing what we want. The only things I am thinking of is that the sound is interfering or that the HDMI-output is somehow broken. Or is it anything else? I'm kind of lost.

  Read the article

• Laptop HDMI out to monitor DVI in

  - by Roy Rico

  I have a laptop that i'm trying to fix, and it has HDMI out. I have a cable i bought for my HTPC which does DVI out to HDMI in, which worked fine. Was hoping to be able to use this same cable for HDMI out to DVI in, is it possible? UPDATE: Point of clarification, The laptop's display doesn't work (it was dropped) and I'm trying to figure out what's working and what isn't. in addition to HDMI out, it has VGA out, but that seems to have a short in it, and doesn't display properly (sometimes it works, sometimes, it shows stuff in 256 colors in 800x640). I can tell the LCD screen works (comes on) so i think it's whatever is carrying the data to it that doesn't work. I know more often than know, the display is what breaks... The cable i'm using is a standard HDMI to DVI cable, there are no audio connections or anything. Thanks!

  Read the article

• Revo 3610 not doing hdmi handshake

  - by DoomStone

  I am having a problem with my Revo 3610 witch is connected to my tv via hdmi. For some reason will it not do the hdmi handshake with the tv, so my tv does not think that there are anything in the hdmi port. I have tested the tv and it works find, with my laptop and dvd. It dose work some times, but this time have it failed for 2 days in a row, and i have tried rebooting, turning the tv off and on, and so on nothing helps. I can trick the TV to listen to the HDMI with connecting with my laptop and then change the hdmi back to my revo, this on the other hand results in the image going thoug nicely but there are a big fat "Check signal cable." on the screen. I have also tryed changing the resolution in the revo but this dose not help ether. Have any one had this problem before, and if so how did you fix it? Example: http://i.imgur.com/gguZ4.jpg

  Read the article

• Converting DisplayPort and/or HDMI to DVI-D?

  - by Jeff Atwood

  Newer Radeon video cards come with four ports standard: DVI (x2) HDMI DisplayPort If I want to run three 24" monitors, all of which are DVI only, from this video card -- is it possible to convert either the HDMI or DisplayPort to DVI? If so, how? And which one is easier/cheaper to convert? I did a little research and it looks like there isn't a simple "dongle" method. I found this DisplayPort to DVI-D Dual Link Adapter but it's $120; almost cheaper to buy a new monitor that supports HDMI or DisplayPort inputs at that point! There's also a HDMI to DVI-D adapter at Monoprice but I'm not sure it will work, either. AnandTech seems to imply that you do need the DisplayPort-to-DVI: The only catch to this specific port layout is that the card still only has enough TMDS transmitters for two ports. So you can use 2x DVI or 1x DVI + HDMI, but not 2x DVI + HDMI. For 3 DVI-derived ports, you will need an active DisplayPort-to-DVI adapter.

  Read the article

• Triple monitor setting in Linux with USB-HDMI adapter

  - by Oscar Carballal

  I'm trying to set up a triple monitor desktop at my office using Fedora 17, but it seems impossible, let me explain the setting: Laptop ASUS K53SD with 2 graphic cards, Intel and nVidia (Screen controled by Intel card) 24" Full HD monitor connected to the HDMI output (controlled by Intel card) 23" Full HD monitor connected to an USB-HDMI adapter (via framebuffer in /dev/fb2, apparently) VGA output (not used) controlled by nVidia card First of all, the USB-HDMI adapter works perfectly, it gives me a green screen (which means the communication is OK) and I can make it work if I set up a single monitor setting via framebuffer in Xorg. Here I leave the page where I got the instructions: http://plugable.com/2011/12/23/usb-graphics-and-linux Now I'm trying to set up the the two main monitors (laptop and 24") with the intel driver and the 23" with the framebuffer, but the most succesful configuration I get is the two main monitors working and the third disconnected. Do you have any idea what can I do to make this work? Here I leave my xRandr output and my Xorg conf: -> xrandr Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA2 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 531mm x 299mm 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) 1920x1080_60.00 60.0 The Xorg file: # Xorg configuration file for using a tri-head display Section "ServerLayout" Identifier "Layout0" Screen 0 "HDMI" 0 0 Screen 1 "USB" RightOf "HDMI" Option "Xinerama" "on" EndSection ########### MONITORS ################ Section "Monitor" Identifier "USB1" VendorName "Unknown" ModelName "Acer 24as" Option "DPMS" EndSection Section "Monitor" Identifier "HDMI1" VendorName "Unknown" ModelName "Acer 23SH" Option "DPMS" EndSection ########### DEVICES ################## Section "Device" Identifier "Device 0" Driver "intel" BoardName "GeForce" BusID "PCI:0:02:0" Screen 0 EndSection Section "Device" Identifier "USB Device 0" driver "fbdev" Option "fbdev" "/dev/fb2" Option "ShadowFB" "off" EndSection ############## SCREENS ###################### Section "Screen" Identifier "HDMI" Device "Device 0" Monitor "HDMI1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "USB" Device "USB Device 0" Monitor "USB1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• 13.04 - Extenal monitor plugged on laptop HDMI shows image but lags a lot

  - by Thiago Fassina

  It uses an Nvidia GeForce GTS 250M. When I plug in the monitor, it shows some images but with bad FPS and lagging a lot. For example, when I move the mouse pointer, it leaves a trail that vanishes from time to time. I didn't install Nvidia drivers because every time I did this on past versions I ended up with an unbootable system. On past versions I just gave up trying to use the monitor cause it never showed anything regardless of what driver I installed. But since 13.04 ALMOST made it, I'll make another tries. ps.: Works perfectlty on Windows 7/8

  Read the article

• Output Audio via HDMI and Analog Out Simultaneously

  - by Alex Miller

  I need to output the system audio from a desktop to both the HDMI output (sending to the display that functions as the room speakers) and via the analog stereo output (to feed the reference input on a microphone array for Skype). The only solution I've found so far for this is an HDMI Audio De-Embedder, but I'd really like to avoid buying another piece of hardware, so I'm hoping there's a way to do this inside software. So: Is there any way to make Windows 7 output all audio over both HDMI and Analog outs, simultaneously?

  Read the article

• Intel motherboard drops HDMI output after Windows boots

  - by Nick

  I have an Intel motherboard (DH67CL) that uses Intel HD 3000 video. It has two video output ports: HDMI and DVI. Both my monitors are DVI, so I have two cables: a DVI-DVI and an HDMI-DVI. If I plug a monitor into just one of these ports, things work fine. But if I plug monitors into each of the ports, the system startup screens show on both monitors, along with the "Starting Windows..." screen, but as soon as the system boots into Windows, the HDMI-connected monitor goes to sleep. When I use the Intel video control panel, the HDMI-connected monitor is not detected. How do I get a dual-monitor setup to work?

  Read the article

• HDMI Sound for HTPC

  - by Brent Arias

  I have the (perhaps) the same problem as stated in this other HDMI sound to HTPC question. I tried the advice of clicking on the speaker in the system tray. I can see the HDMI audio device I want to use. That device claims to be functioning properly. But there is no sound, and it won't let me select it as the active audio device. When I click on the troubleshooter, it says that there are no speakers connected. I would think this is because my computer us unable to pipe sound through the video card (preventing the HDMI from carrying it), except that it truly claims that it has an HDMI sound device that is working correctly. So I'm not sure what is wrong at this point. Thoughts? My system is Windows 7 x64. In case it makes a difference, the video card I'm using is this GeForce GTX 560

  Read the article

• HDMI Audio drops out when display enters powersave

  - by Jared Tritsch

  I have a Windows 8 machine with an AMD APU attached to my Home Theater system through HDMI (HDMI routes through a Home Theater AMP, then into the TV). Here's my problem, Whenever the display is interrupted, usually by the TV being turned off or into powersave mode, the audio device lists as "Disconnected" in windows audio devices and I cant get it to re-recognize that the HDMI audio is, in fact, plugged in. The only solution I have found so far is to restart the machine, which will then recognize the device without any problems, until the next time the TV turns off and the problem once again resurfaces. Has anyone else seen this phenomenon? I have no idea if its the GPU, the HDMI interface, the AMP, or even the TV itself, as there really isn't much a way to tell...

  Read the article

• HDMI connection does not support HDCP

  - by mroggi

  Hi, My problem: error message when playing blu-ray movies stating that the HDCP encryption could not be established. My setup: A new projector (EPSON EMP TW700) with a HDCP-compliant HDMI port a PC with a brand-new graphics adapter (Sapphire HD 4350 512MB DDR2) supporting HDCP Connection made with a DVI cable (it's installed in my wall) and a DVI-HDMI adapter to connect the projector Latest drivers and software My questions: What can I do to establish the HDCP connection? Would it help to use the HDMI output of the graphics adapter instead of the DVI (could it be that the HDCP chip is only supported on HDMI?) Any other ideas? I am very thankful for any hint.

  Read the article

• Ubuntu 9.10 freezes when HDMI port is connected

  - by Felipe Hummel

  Hi, I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

  Read the article

• Can I use only a HDMI monitor?

  - by Felix

  I recently found out there are such things as PC monitors with TV capabilities (or TVs that can be PC monitors), and the idea kind of tickles my fancy. I'm thinking of getting one of these gadgets, and if I do, I will connect it to my PC via HDMI (my graphics card has builtin HDMI), so that I also get sound to the TV. The reason for this is because I have a 2.1 sound system which I want to use both on the PC and the TV. Basically, I want the configuration to look like this: Cable --------> TV --> 2.1 Sound System PC --HDMI--> TV --> 2.1 Sound System My question is: can I use a setup like this? Can I not have a classic VGA monitor? Will I be able to see non-graphical interfaces (such as the BIOS, GRUB, a Linux terminal, ...) through HDMI on the TV? I use Windows 7 and Ubuntu.

  Read the article

• Ubuntu 9.10 freezes when HDMI port is connected

  - by Felipe Hummel

  I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. The laptop has a Intel 4500 video card. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

  Read the article

• windows-7 hdmi audio

  - by YDG

  Hello, I am using windows 7 and here is my question : Is there a way for windows to swtich my audio output to HDMI automatically when a HDMI cable is plugged in ? Right now, to switch the audio output I need to go specify my default output to HDMI everytime I plug it in and set it back to speakers once I plug it out. Cheers !

  Read the article

• hdmi output of windows 7 does not stay alive

  - by sjors miltenburg

  I have built a server that is connected to ONLY my tv (with hdmi). If I switch my tv to hdmi and boot my server I get the expected result (windows is displayed on my tv) and I can fully interact with it, no problem. However when "some time" passes the image on my tv dissapears and it seems the server is not outputting any hdmi signal anymore. It does not wake up on mousemove or keyboard presses. I can still interact with my server through a remote desktop session. The only way to get the hdmi output back is to reboot the server. I tried to prevent the computer from "sleeping" but this did not work. I tried upgrading from windows vista to windows 7 but this also did not work. Do you guys have any other ideas?

  Read the article

• My Linux desktop sees my HDMI-connected monitor, but my monitor says "No signal"

  - by hrunting

  I have a Gigabyte H55M-UD2H motherboard and an Acer S271HL monitor. When I connect the monitor to the motherboard via VGA, signal works perfectly. When I connect the monitor via HDMI, the system "sees" the connection, but the monitor receives no signal (the monitor shows a blue box which reads "No Signal" and then the monitor goes into power-saving state). Some fun facts about this: if I hook a different monitor to this box via HDMI, the monitor receives the output without issue (same computer/motherboard, same cable, different monitor) if I connect a different computer to the monitor via HDMI, the monitor receives the output without issue (different computer, same cable, same monitor) no signal is received whether in the OS or in the BIOS there are no BIOS options for controlling video output other than for selection of onboard vs. PCI/PCI-E-based video card (the system has no dedicated video card installed) The box is running Linux, so I have the output of xrandr which shows the connection and the monitor modes detected via DDC: ~$ xrandr --prop Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm EDID: 00ffffffffffff000472ca028d128022 1c160103803c2278ca7b45a4554aa227 0b5054bfef80714f8140818081c08100 9500b300d1c0023a801871382d40582c 450056502100001e000000fd00384c1f 5311000a202020202020000000fc0053 323731484c0a202020202020000000ff 004c55573044303130383531300a01e5 020324f14f0102030405060790111213 1415161f230907078301000067030c00 1000382d023a801871382d40582c4500 56502100001f011d8018711c1620582c 250056502100009f011d007251d01e20 6e28550056502100001e8c0ad08a20e0 2d10103e960056502100001800000000 000000000000000000000000000000de Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 HDMI3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on How do I get this monitor to recognize the output from this HDMI socket?

  Read the article

• Using Toshiba 22EL833 as PC display through HDMI input

  - by Oleg V. Volkov

  I had another Toshiba TV - 19SL738 - connected to this same PC and video card (GTX 8800) through DVI<-HDMI (DVI on PC side, HDMI on TV) before, that was working perfectly at it's native resolution 1360x768. Some time ago I had to change to 22EL833 and immediately faced problem with Windows 7 control panel and NVIDIA control panel both reporting native resolution for new TV as 1080i, 1920x1280, despite TV documentation saying that it have same 1360x768 as previous one. Practical tests confirmed that true native resolution is indeed 1360x768, because plugging in through DVI<-VGA and setting custom resolution through NVIDIA panel shown clear colors and crisp image, while setting anything different with either DVI<-VGA or DVI<-HDMI produced horribly distorted or squished images, with almost unreadable slim lines (as in letters, for example). Now, my problem is that there's no drivers for this TV and I'm unable to get good image while connecting it through DVI<-HDMI directly. The best I've achieved is editing EDID/driver manually, to persuade system that native resolution should be 1360x768, and while image became mostly clear, colors turned to some strange washed out effect, with pools of pure yellow, cyan and magenta there and there filling place of other colors. Gradients also became noticeably stripped as well. Somehow it looks like dithering gone bad and makes me suspect that image is still down/upscaled several times internally somewhere along the line. How can I connect this TV to DVI output of my video card to get best possible clear image, correct colors and correct native resolution?

  Read the article

• 1080p monitor: connected through VGA - perfect, HDMI - awful

  - by develroot

  When I connect my 23" monitor (1920x1080) to my pc through HDMI, I encourage some problems. It's not full screen That's it. There are ~1cm black borders on right and left side and ~0,5cm black borders on the top and the bottom of the monitor. That's pretty frustrating. I tried adjusting overscan, but I can't mannualy type the % of overscan that I need. I can only select between ex. 8 and 10% in AMD Vision Engine Control center, but what I need is 9%. Next, even if i select 10% and the image fits all the corners, but after log off all the settings are lost and I have to do it again and again. Text, images, everything looks blurry That surprised me a lot. Should'nt HDMI quality be better than VGA's one? When connected through HDMI, the text isn't readable. It's like a very low refresh rate, although i'm running at 60Hz. Also the text has something like little shadows, very very annoying. Are there any tips to get the same quality as with VGA, with HDMI ? (running on integrated ATI Radeon HD4200, which, appearently, is the best card I have ever seen in terms of integrated ones)

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >