Search Results

Search found 289 results on 12 pages for 'ipconfig'.

Page 3/12 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• How to make Windows 7 use the internet connection that I specify

  - by user138957

  I have a LAN adapter and a USB wireless internet connection. When both connected windows 7 always uses the USB. I tried changing the metric values but no luck. Let me explains the steps I took. Currently automatic metric on all adapters. LAN connected. ipconfig shows that it is connected to the correct ip/dns/gateway etc. IPv4 Route table shows Metric 24 Then connected USB. ipconfig shows USB connectivity then LAN in that order. Internet is now through USB. IPv4 Route table shows Metric 4249 for LAN and USB is 41. Gateway for USB shows "on-link". netstat -rn shows USBDEVICE on top. Changed LAN metric to 5 and now the route table shows LAN as 9 (not sure why it added 4) and USB as 41. netstat shows LAN then USB. ipconfig shows LAN then USB. But still connection is through USB. How do I know? Task manager shows utilization only through USB as well as speed is showing around 1mbps rather than LANs 10mbps. How can I get win7 use LAN while USB is connected. I am just trying to use USB as a backup just in case I lose LAN connection. Please help!! I thought i will make USB metric manually to say 10. But it says I have to reconnect for it to be effective. Currently USB still shows below LAN and still has 9 and 41 in the table. Disconnected USB. Table shows LAN metric as 24 (Not sure why it got changed from 9 and setting got reverted by to automatic) Reconnected USB. Now in the setting still shows 10 and the route table shows 11 for USB and LAN shows 4249 (settings shows 4245, 4 less)) For some reason restarting USB is resetting LAN setting when reconnected. Thanks

  Read the article

• How can I get windows to release an IPv6 address

  - by Mark Robinson

  I have a windows system with an IPv4 address and an IPv6 address and I'm trying to figure out how to release my IPv6 address. I've tried ipconfig /release6 and I get this error An error occurred while releasing interface Local Area Connection : The system cannot find the file specified. An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified. No operation can be performed on isatap.{6B874193-B28A-4446-B6E6-8ADAC22E5090} while it has its media disconnected. No operation can be performed on IP6Tunnel while it has its media disconnected. I still have my IPv6 address at the end. I can release IPv4 address using ipconfig /release

  Read the article

• Network card dies when trying to wake up laptop from sleep

  - by Bugmaster

  I have a Dell XPS 1640 laptop (aka Dell Studio XPS 16), running Vista. Whenever the laptop wakes up from sleep, my Broadcomm LAN card immediately dies. Any attempt to access it completely locks up whichever program I use to access it. There appears to be no way to re-awaken the card, other than rebooting; note that Vista does not even shut down properly if some program is waiting for the card. So far, I have tried the following: Disabled the "allow your computer to shut down this device to save power" in the device properties. This had no effect. Attempted to disable and then enable the card in the device properties. No effect. Tried ipconfig /renew: this locks up ipconfig to the point where I can't even kill its process. Force-install updated drivers from broadcomm: no effect. Does anyone have any other ideas ?

  Read the article

• How do I run multiple commands on one line in Powershell?

  - by David

  In cmd prompt, you can run two commands on one line like so: ipconfig /release & ipconfig /renew When I run this command in PowerShell, I get: Ampersand not allowed. The & operator is reserved for future use Does PowerShell have an operator that allows me to quickly produce the equivalent of & in cmd prompt? Any method of running two commands in one line will do. I know that I can make a script, but I'm looking for something a little more off the cuff.

  Read the article

• Wrong Connection-specific DNS Suffix

  - by mydoghasworms

  I am on a Windows network with a Windows 7 machine. For some strange reason, when I run ipconfig, I see that I have the wrong DNS suffix for my network adapters, e.g. def.companyname.com as oppsed to abc.companyname.com. My colleagues next to me, who are on the same network, have the correct suffix. Where does the problem originate, and is it something I can fix on my machine (and if so, how?), or is this something a network administrator must resolve? (I did ipconfig /release and /renew, but that did not help).

  Read the article

• DNSCache excesive memory usage Windows Server 2008 R2

  - by MikeT

  We are having an issue with the dnscache service where its memory usage is becoming excessive (~6GB) after a week or two. Restarting the service frees this memory but performing ipconfig /flushdns does not, an ipconfig /displaydns shows aprox 15-20 entries in the cache. We have checked and there appears to be aprox 150 DNS queries per second taking place but I would not expect this to have the effect of causing this memory issue. I have tried to search MSDN for hotfixes or bug reports but I could only find a reference to a memory leak in windows 2003. can anyone suggest how to proceed.

  Read the article

• How to Find Your IP Address in Ubuntu Linux

  - by Trevor Bekolay

  In Windows, we use the command-line program ipconfig to find out our IP address. How do you find it in Ubuntu? We will show you two locations easily accessible through the GUI and, of course, a terminal command that will get your IP address in no time. The first location, and the easiest in most cases, is found by right clicking the network icon in the notification area and clicking Connection Information. This brings up a window which has a bunch of information, including your IP address. The second location, which shows you more detail than this first method, is at System > Administration > Network Tools. Select the right network device, and you’ve got a ton of information at your fingertips. Finally, if you can’t tear yourself away from a terminal window, the command to type in is: ifconfig Yes, it’s only one character different than ipconfig. Who would have guessed? As it turns out, you’re always a few clicks or keystrokes away from finding your IP address in Ubuntu. Isn’t choice great? Similar Articles Productive Geek Tips Change Ubuntu Desktop from DHCP to a Static IP AddressAdding extra Repositories on UbuntuClear the Auto-Complete Email Address Cache in OutlookMake Firefox Display Large Images Full SizeChange Ubuntu Server from DHCP to a Static IP Address TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics

  Read the article

• Mobile Device emulator cannot access localhost

  - by Diana

  I am using Windows Mobile 6 Professional Emulator and Windows Mobile Device Center. I connected and cradled the emulator to my computer. I am trying to connect from the browser of the emulator to a webservice that is deployed in the IIS of my computer (same machine where the emulator is installed). If I connect my computer to the internet, I can access any website, including my local WS (using the IP returned by ipConfig). The problem is when I disconnect the computer from the Internet: I cannot access my local web service using the IP (internal one returned by ipconfig), or machine name. Do you have any ideea what settings am I missing? I am sure this it's possible somehow, I just don't know how... PS: The goal is to access the WS from a mobile application, but until I cannot access it from the browser, I cannot access it from the application either. Thank you!

  Read the article

• deploying a simple html website with eclipse EE & tomcat 7 & router for pc not in LAN

  - by hawkeye

  Hello everyone and thanks for your time, first of all - I want to make a note - I can see the website from my own pc which is the only one connected to the (netgear dgn1000) router, and I can do so with several browsers on my pc, but - when I try and do a port forwarding so that I could access this simple html file (which in the way would use a simple servlet class) I can't seem to view it I have configured my router (both the "services" and the "firewall" sections), and I have also changed my LAN properties according to my ISP's explanation (via phone) : instead of choosing the "obtain an IP address automatically" I have chosen the "use the following IP address, with IP address of 10.0.0.1 (this was also set in the router's port forwarding), Subnet mask of 255.255.255.0, default gateway by checking the same value as seen in the cmd when executing the command ipconfig /all after doing so I've changed the DNS to use the address (just the preferred and not the alternate one) given with the ipconfig /all and still - nothing :/ is it something in my network settings or in my deployment of the eclipse/tomcat ? any help would be greatly appreciated, thanks :)

  Read the article

• Windows 2003 DNS or IIS6 Problem?

  - by Mario

  Weird DNS problem... We have an intranet located internally on a windows 2003 / iis6 server - DNS handled internally on another windows 2003 server. The intranet, amongst other functions, hosts a ecommerce store I wrote that sells nike apparel embroidered with our company logo. Up until recently, it would send an email to payroll and the cost would be deducted from the employees paycheck. lets say this store is located at http://mydomain.com (only available internally) Now, we've been told by the accountants that we can no longer auto deduct from payroll and the employee needs to pay with a credit card or cash. So i went to thawte.com and ordered an SSL cert to be on the safe side (even though the CC gateway is secure) and they told me i need to drop the .com from the domain name Not wanting to mess with a system thats perfectly functional, i created another DNS entry that just points to mydomain (no .com) and left the old one in there. so they would go to http://mydomain On my Mac (OS X 10.6) i can hit either one just fine On Windows XP / Windows XP Embedded or Windows 7 (the vast majority of the pc's on our network) http://mydomain - returns nothing http://mydomain.com still works https://mydomain.com works but says the cert is invalid (as it should, it was issued to mydomain - not mydomain.com) my question is: why does it work on my Mac and not on a Windows PC (i get dhcp and dns just like any other pc on the network) and will removing the .com one from the DNS server resolve this? I've done all the usual attempts - ipconfig /flushdns, ipconfig /renew and release even going so far as to stop and restart DNS client on my Windows 7 box; rebooting and shutting down - adding a regedit entry something along the lines of SecureResponses and rebooting nothing works... I think its the .com and the not conflicting in DNS but i'm not sure - and why not on OS X We're closed on sunday and i'm going to remote in and see what happens if i remove the .com from DNS but any other ideas? -Mario

  Read the article

• why adding router will hide all share folders

  - by user1285419

  I have several computers running winxp installed in my office, they are all connecting to the WAN providing by the building (wall socket) (DHCP, mask 255.255.252.0). I setup a shared folder in my computer so all other computer in the same group could access it. This configuration have been using for long time. Recently, I am trying to setup a router. I have the WAN port of the router go to the wall socket, connect the NIC to the LAN port of the router, setup the router in DHCP mode (192.168.0.100/255.255.255.0 to 192.168.0.110 /255.255.255.0), I turn off all the firewall (windows one and router's builtin one), the NIC has ip set as DHCP. If I ipconfig/all, I see that the NIC was assigned ip 192.168.0.100. I can access the internal, email whatever. However, the shared folder can no longer be accessed by other computers in the same group. I think it is the problem of ip. But what's really weird is if I turn off the DHCP function in the router, ipconfig/all always give 0.0.0.0/255.255.255.255 and I cannot access the internet. I have no idea what's going on. Anyone know how to fix it and allow the shared folder in application of router? Thanks.

  Read the article

• Linksys WAP54G v3.1 no access, power and link LED solid

  - by user142113

  I'm managing the Network of a small enterprise. A Linksys WAP54G v3.1 used to provide the WiFi network. I was called, because the device did not provide a WiFi network anymore. I first of all tried to ping the device via LAN, but there was no reaction. I've frequently reconnected the AP to the mains and always the POWER and the LINK LED keep solid, even if no network cable is connected. What I've done yet: Reset as documented: Pressed the RESET button for 10 seconds. After that I have tried to access the AP with a direct cable connection to my computer, that I've set to a static ip of 192.168.1.240, but i got no ping response on the default IP 192.168.1.245. Furthermore ipconfig reports "media disconnected". More complex reset method as described here http://bruceshankle.blogspot.de/2005/12/how-to-reset-linksys-wap54g.html as well had no effect. also tried to ping 192.168.1.1 without success Tried this method: http://www.daniweb.com/hardware-and-software/networking/threads/142437/linksys-wireless-access-point-problem#post680245 but there was no ping response when powering up. As well the tftp transfer timed out Finally tried to short pin 15 and 16 of the flash chip on the bottom side of the AP mainboard while booting to provoke a Checksum error. This should lead to the possibility to upload a firmware with tftp, as the AP stops booting and waits for a tftp connection on 192.168.1.1. But I've had no success. As well i've put pin 15 and 16 to ground while booting, also without an effect. After all that I still can't ping the AP, ipconfig still tells me "media disconnected". The POWER and LINK LED are solid. I would appreciate your answers

  Read the article

• Suspected Router problems, [closed]

  - by jordon_user

  I am new to this forum. I appreciate any help you can offer. I have been troubleshooting an error with both my WIRED Internet Connection I have 3 desktops running through this working connection (Router) with no problems. Two computers, one laptop and desktop experience the issue. If I connect directly to the Modem, on either, no problem on the internet. Through the Router, my computer connects for a period of time but if ever awaking my comp, or restarting, the yellow explanation mark returns. The only way I can get the connection up = cmd. ipconfig /release, ipconfig /renew. This constant command is annoying and was hoping for a permanent fix. Audio is also not working. I know its likely a driver error, but its an old comp we put together and if there's an easy fix itd be great to hear from you! If you need any more info just let me know. Thanks! THanks guys!

  Read the article

• windows 2003 under Hyper-V - can't send/receive ping

  - by glaucon

  I've installed Windows 2003 x64 R2 SP2 under Hyper-V (the Windows Pro 8 edition). I have a NIC configured but I can't move any traffic on it. In particular I can't send or receive Pings. Scoreboard There is a second VM running Ubuntu under the Windows 8 host which is able to send and receive pings from the host O/S . When I try to ping from Windows 2003 guest to Windows 8 host I get 'Request Timed Out'. When I try to ping from Windows 8 host to Windows 2003 guest I get 'Reply from 192.168.10.107 Destination Host Unreachable'. There's no problem pinging from the Ubuntu guest to the Windows 8 host and no problem pinging from the Windows 8 host to the Unbuntu guest. Environment Integration services are installed on Windows 2003. The windows 2003 needs a static IP address of 192.168.10.15. The Windows 2003 ipconfig output looks like this : While the host o/s ipconfig output looks like this : Event Logs The only things I can see in the event logs which is (a) looks signifcant and (b) is not related to the lack of networking is this : I'm not sure if that's significant or not. Hyper-V and NICs When the Windows 2003 guest was first booted it had no NIC; I subsequently added a 'Legacy Network Connector' which I couldn't get Windows 2003 to recognise; I subsequently removed that and added a 'Standard Network Connector' and at least on the surface this works ... only it doesn't. 'Virtual Network Type' is external. Although I've only mentioned ping there's no other evidence of network activity. 'Allow incoming echo request' is enabled on the Windows 2003 guest. HELP ? What else should I look at or do to resolve this problem ? EDIT 1: I should have said that I turned off the firewall on the W2003 server for a while and retested the pings; same result.

  Read the article

• windows clients cannot get dns resolution until you open and close ipv4 properties page

  - by GC78

  This strange problem has started recently. Some windows clients cannot seem to get dns resolution to the internet after boot, and sometimes again at some point in the day. Internal hosts are also slow to resolve. trying to ping an interal host by name will take a long time for the hostname to resolve to ip address and trying to ping a website by name will fail to resolve. If you go into the tcp/ip v4 properties and view but not change anything, ok/close out of that then the client starts working fine, hostnames will resolve quickly. I have seen this happen on both Vista and W7 clients. ipconfig /all at a client experiencing this problem shows everything in order. proper ip addr, gateway, dns server, dns suffix ect.. ipconfig /dnsflush will not fix them, neither will /release and /renew the clients get their ip address, mask and dns server info from either one of 2 OES dhcp servers that assign addresses in different scopes in the same subnet. the internal dns server is a different OES dns server the default gateway is not assigned by the OES server but is statically put in at the client (only for those who need to get to the Internet for their job) flat network topology What can I do to get to the bottom of this? It only happens to a few of the client machines and typically the same ones. It started happening when we made a change to one of the DHCP scopes in iManager. Strangly this problem only happens to clients that get an IP address from the scope that we didn't make any changes to.

  Read the article

• Why can't I renew my dynamic IP address?

  - by qwerty

  So, I'm going to explain this from the start. I've started a project with a friend of mine which includes a webspider, that crawls through all pages on a site and stores them in a DB. Since I've never done this before, I didn't think about the amount of requests I was actually sending to the site, and after a day or two I finally got my IP blocked. I need to be able to visit that site as it's very important to me. Not only for my project, but for other reasons too. (and if I'm able to renew my IP I'm going to set a delay on the crawler so I don't get blocked & DDOS the site) I have a dynamic IP address, at least that's what my router settings say. I've tried ipconfig /flushdns, ipconfig /release, restart computer. No result. I end up with the same IP address. I've also tried renewing it from the router, however, I think it uses the same method which isn't working. Is it possible that site has blocked my mac address? Can a site even access my mac address?

  Read the article

• Bridging my laptop's wireless and wired adaptors

  - by stacey.richards

  I would like to be able to connect a desktop computer that does not have a wireless adapter to my wireless network. I could just run a network cable from my ADSL/wireless router to the desktop computer but sometimes this is not practical. What I would really like to do is bridge my laptop's wireless and wired adapters in such a way that I can run a network cable from my laptop to a switch and another network cable from the switch to a desktop computer so that the desktop computer can access the Internet through my ADSL/wireless router via my latop: +--------------------+ |ADSL/wireless router| +--------------------+ | +-------------------------+ |laptop's wireless adaptor| | | |laptop's wired adaptor | +-------------------------+ | +------+ |switch| +------+ | +-----------------------+ |desktop's wired adapter| +-----------------------+ A bit of Googling suggests that I can do this by bridging my laptop's wireless and wired adapters. In Windows XP's Network Connections I select both the Local Area Connection and the Wireless Network Connection, right click and select Bridge Connections. From what I gather, this (layer 2?) bridge will examine the MAC address of traffic coming from the wireless network and pass it through to the wired network if it suspects that a network adapter with that MAC address may be on the wired side, and vice-versa. If this is the case, I would assume that when the desktop computer attempts to get an IP address from a DHCP server (which is running on the ADSL/wireless router), it would send a DHCP broadcast packet which would pass through the laptop's bridge to the router and the reply would return through the laptop's bridge back to the desktop. This doesn't happen. With some more Googling I find some instruction how this can be done with Linux. I reboot to Ubuntu 9.10 and type the following: sudo apt-get install bridge-utils sudo brctl addbr br0 sudo brctl addif br0 wlan0 sudo brctl addif br0 eth0 sudo ipconfig wlan0 0.0.0.0 sudo ipconfig eth0 0.0.0.0 Once again, the desktop cannot reach the ADSL/wireless router. I suspect that I'm missing some simple important step. Can anyone shed some light on this for me?

  Read the article

• Certain websites redirect to 127.0.0.1. How do I fix this?

  - by Dian

  Facebook and Youtube in particular. Tried nslookup the address shows as 127.0.0.1. Checked the HOSTS file, it's fine. Ran Malwarebytes' Anti-Malware (didn't find any problems) and SpyBot Search and Destroy (found 1 problem). (Not sure if the Spybot made this improvement) now pinging youtube shows the correct address (74.125.71.91) but the browser still says: Connection to 127.0.0.1 Failed The system returned: (111) Connection refused Tried ipconfig /flushdns but there are no changes. Switched to another user but the results are the same. hosts file: # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself. # 127.0.0.1 localhost # ::1 localhost ipconfig all: Connection-specific DNS Suffix: DNS Servers: 10.1.1.30 208.67.220.220

  Read the article

• Command prompt cannot find PATH variable

  - by davidXYZ

  Sometimes, my command prompt cannot find the PATH variable. I have this occasional problem at work where when I open command-prompt and run commands like ipconfig or subst, I get an error saying something like 'ipconfig' is not recognized as an internal or external command. When I try this echo %path%, it prints out %path% instead of the PATH value. If I look at my Environment Variables window, the PATH is defined right there but I don't know why CMD can't find it. At this point, I understand why the other commands were not being recognized since their paths are in PATH variable. However, I cannot understand why the PATH variable is not being found. If I restart the computer, everything is back to normal. In a few days, I might have the same experience again. I tried using this answer. It suggested changing a registry value but mine already had the value that was suggested yet it wasn't working. (The restart step at the end would have solved it as usual but that's not the point.) Any suggestions regarding why the PATH variable may become invisible every now and then and how I can prevent it from happening again?

  Read the article

• List of all TCP/IP and WinSock Repair commands

  - by Niepojety

  I am building a C# application and I am looking for all a list of TCP/IP and WinSock Repair commands. ipconfig /flushdns netsh int reset all netsh int ipv4 reset netsh int ipv6 reset netsh int ip reset netsh int ip reset c:\ipreset.log netsh int ip reset resetlog.txt netsh int ip reset c:\resetlog.txt netsh int ip reset c:\network-connection.log netsh int 6to4 reset all netsh int httpstunnel reset all netsh int isatap reset all netsh int tcp reset all netsh int teredo reset all netsh int portproxy reset all netsh branchcache reset netsh winhttp reset netsh winsock reset c:\winsock.log netsh winsock reset netsh winsock reset all netsh winsock reset catalog

  Read the article

• Does USB modem have its MAC Address???

  - by sahil

  Hi friends, MY USB modem is now showing its MAC address in ipconfig /all. So does USB modem have its MAC address ?????? sahil.

  Read the article

• Does a USB modem have its own MAC Address?

  - by sahil

  My USB modem is now showing its MAC address in ipconfig /all. So does that mean that a USB modem has its own MAC address?

  Read the article

• internet disconnects

  - by Smokezzaj

  Internet disconnects and reconnects, computer is in a peer to peer workstation with two other computers XP o/s. Only one computer has this problem the other two don't disconnect. Computer's connect to switch no router is being used. Ipconfig shows a DHCP connection, local area connection status shows packets being sent out but packets are not being received or being received at a extremely slow rate. Tried Winstock tool, reinstalling network card driver, restored to previous date, checked ethernet cable and release/renew IP.

  Read the article

• How to access VMWare localhost from my mac?

  - by Abe Miessler

  I have developed a asp.net application on my VMWare virtual machine that I can access (on my VM) by going to http://localhost:1044 How can I access this from safari on my Mac that is running the VM? I tried running ipconfig on my VM and then using the IP address that was given for "Ethernet adapter Local Area Connection", something like this: http://192.168.179.139:1044/ but this throws a not found error. I am currently using NAT. How can I get to localhost on my VM from my mac?

  Read the article

• Why is my router not routing?

  - by dwj

  Starting a week and half ago my router stopped working with my cable modem. I went to sleep with it working and woke up with it not. I swapped in another router and am still having issues; I was gone for 10 days so now I'm back to trying to figure it out. While I was gone I left everything (cable modem, router, and computer) powered off. My setup: Comcast Ambit cable modem (from Comcast) Netgear WGR614 v4 router -- replaced with Linksys WRT54GS v1.1 Windows XP SP3 other computers, all currently unplugged The modem is using the firmware (ver 2.105.2001) provided by Comcast; hardware version 1.3 The Linksys router is using FW ver 4.71.4 (latest for this release of HW), factory defaults I am only using the wired connections; no wireless. I have swapped out all of the cat5 cable. If I plug my computer directly into the cable modem, I can ping by name or number. Everything works perfectly. If I plug my computer into the router and the router into the modem, I cannot access anything outside of my local network. This is the exact setup I've used for the past 5 years; there were no changes in the past year. Now here's the interesting part: I can log into the Linksys router and get status information from it; everything appears good. Using the Diagnostics, I can run ping and traceroute to any site on the internet. These work perfectly. From my computer, I can ping the router and the modem. However, I cannot ping anything on the internet by with name or number. If I plug in another computer, I can ping it successfully. I've included two transcripts below that show these two attempts. Addresses, DNS, gateways, etc. look good. I cannot access the internet through either router. I am at a loss here. Suggestions? Help! Computer to Router to Cable Modem C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:21:55 PM Lease Expires . . . . . . . . . . : Tuesday, March 23, 2010 10:21:55 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Ping request could not find host google.com. Please check the name and try again . C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\ Computer to Cable Modem Directly C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 DHCP Server . . . . . . . . . . . : 68.87.76.10 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:18:50 PM Lease Expires . . . . . . . . . . : Monday, March 22, 2010 11:12:31 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Pinging google.com [74.125.19.99] with 32 bytes of data: Reply from 74.125.19.99: bytes=32 time=20ms TTL=55 Reply from 74.125.19.99: bytes=32 time=17ms TTL=55 Reply from 74.125.19.99: bytes=32 time=28ms TTL=55 Reply from 74.125.19.99: bytes=32 time=18ms TTL=55 Ping statistics for 74.125.19.99: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 17ms, Maximum = 28ms, Average = 20ms C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=17ms TTL=55 Reply from 74.125.19.104: bytes=32 time=16ms TTL=55 Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 16ms, Maximum = 18ms, Average = 17ms C:\

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >