Search Results

Search found 4775 results on 191 pages for 'permissions'.

Page 3/191 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Samba network sharing NTFS drives and root permissions from local drives

  - by Bill

  I'm able to share my internal 2ndry NTFS drives (sdb1,2 and 3) on the network with Windows computers now but even though Samba read/write is enabled, Windows network computers can only open files "read-only" and can't save files to the samba shared drives/folders. I try to set permissions in Ubuntu via folder and/or file properties even logged in root via Nautilus but all the samba shared folders and files are set as owner = root, accessible and does not allow me to change them to read/write, it just resets to root, accessible, in other words, I can't change permissions. I'm running Ubuntu 11.04 Gnome on an old Dell Dimension 2400. Also, in order to for me to copy or move any files from the Ubuntu drive to the sdb1,2 or 3 drives, I have to gksu nautilus. This consequently prevents me from copying .ISO files to my "Multisys" thumb drive too.

  Read the article

• Permissions depending on parameters passed to application

  - by Engineiro

  I have a java app that writes to a very important table I have. This is sudo protected, but this app takes a parameters for where the output should go. The default is the REAL DEAL but the "output" parameter takes priority over the default, so if a user provides a path that they have write permission for, say: /home/username/mystuff then I would like for users to be allowed to write to these directories. The app is launched in a shell script, so I am wondering if I can check that the string does not equal /path/to/real/deal and not empty (since /path/to/real/deal is the default) and allow users to write to places they have permissions for. My impression of linux permissions is that it is tied to the application itself and cannot be conditionally approved, but I wonder if there is some bash fu or alternative method I can perform to get me my desired result. Using Ubuntu 10.04.4 LTS

  Read the article

• Give permissions for packages downloaded from the internet and lock them in Ubuntu 12.04 sidebar

  - by JuninhoDG

  I downloaded NetBeans IDE and Eclipse IDE from the internet and installed then. Well, the Eclipse IDE works fine, but when I execute NetBeans IDE directly from the link, without sudo permission, it shows me lots of error telling that some files are read only. This does not happens when I'm using the terminal to call the .sh script with sudo permissions. Another thing that bothers me: How can I fix my shortcuts in the Ubuntu's 12.04 sidebar? I want to combine a launcher with enough permissions to do everything it's needing and fix it in my sidebar. Is it possible?

  Read the article

• Permissions scheme not working

  - by ReaZem

  I am currently building a home server and I am trying to give minimal permissions to every service. I am new to permissions management and this is an awesome learning experience for me :). drwxr----- 7 reazem enter-home 4096 Sep 9 21:43 reazem drwxrws--- 3 reazem minidlna 4096 Sep 9 21:36 media reazem is my home folder and media is my media folder, it is situated directly inside my home. The minidlna user is part of the following groups : minidlna, enter-home. I get the following error: Media directory not accessible! [/home/reazem/media] I was hoping that because the minidlna user is part of the enter-home group, it could get inside the home folder, and then inside the media folder because it is in the minidlna group. Where is my mistake? Edit: I found out that chmod g+x /home/reazem solved the problem, but why? Why would you need the execute permission to get inside another directory? Thank you!

  Read the article

• Setting up fastcgi on an Ubunutu server (socket file permissions issue)

  - by gray alien

  I am trying to set up mod_fcgid on my server. Part of the requirement is that Apache needs to create a socket file for mod_fcgid. I specified the folder for Apache to write the socket data to: /var/run/apache2/fcgid I then specified this file in my fcgid.conf file as follows: SocketPath /var/run/apache2/fcgid/sock I then changed the owner of the folder to www-data (the apache user) and gave the owner full permissions to the folder and its contents. I was able to run my test fcgi app then. When I rebooted the machine, y fastcgi app no longer worked. After some investigation, I found that ownership of /var/run/apache2/fcgid has been reset to root, and with permission reset to 700 I have the following questions: Is there something specific about the /var/run folder? why is the permissions being reset after a reboot? Should I move my socket file to another location (in case root automatically takes ownership of contents in this folder for security reasons?) I am running Ubuntu 10.0.4 LTS 64 bit

  Read the article

• Unix Permissions: Enable access to files no matter the user?

  - by TK Kocheran

  I've been using Linux for a long time and I still am completely in the dark about how file permissions really work. With that in mind, does anyone have any books or thorough guides I could read to really understand things completely? I've done my fair share of sysadminning, so I know the easy stuff like making directories readable and writable, making files executable, and changing the owner of a file, but on sharing files across users, I'm lost. Here's my main problem. I have a number of machines across which I intend to synchronize my music library. I've been using Unison for a while now and it's a great choice as I can easily run it over SSH on my local network which I just set up. Win-win. Up until this point, I've been synchronizing computers using a 2TB external hard drive. (computer 1 unisons to HD, computer 2 unisons to HD, etc.) This is tedious at best, especially since I encrypted the drive, making it a huge hassle to hook it up to all of my machines and sync it. Anyway, the drive is running ext4 (in TrueCrypt), so it maintains all Unix filesystem info like owners and groups. I just set up a new machine and just Unison'd it to get the music on it, and I realized that now, all of my permissions are fubar. I had to run Unison as root since that was the only way I could get the files to come off of the external drive. Apparently, since I'm using a different user name on this machine than my usual "rfkrocktk" across all machines, this essentially throws a huge wrench in the gears. Here's my use case. This laptop has two effective users, "leandra" and "rfkrocktk". I want to share music between these two users, so I symlinked /home/rfkrocktk/Music to point to /home/leandra/Music. How do I (a) allow both users access to read/write/delete files in this folder, and (b) keep everything nicely in sync without messing up file ownership?

  Read the article

• Media Drive Permissions

  - by Wade Wofford

  I just switched from a Hackintosh to Linux, and am trying to make sense of it. On my hackintosh, I partitioned a big drive into 3 parts--1 which holds music, 1 for film/tv, and one for the OS. I installed Ubuntu onto the OS partition, and am now trying to make it so I can write to the media drives. I've searched around and tried several things. I tried gksu nautilus in Terminal, which brought me into root permissions. When I select a folder and try to change permissions, I get "The owner could not be changed...Error setting owner: Read-only file system" Ultimately, I have two specific aims: - I want to make it so I can write to the film/tv drive from the ubuntu machine only - I want to make it so I can write to the music drive from the ubuntu machine, or any other machine on the network (all Macs). That is, I want a single music library (an iTunes file) that will serve all Mac laptops/iPads/iPhones on the network, but which XBMC on the Ubuntu machine can also see / read from. Music will be added to the iTunes library via a single Mac laptop, but all other devices should be able to see the music drive.

  Read the article

• Insufficient permissions when calling flickr.auth.oauth.checkToken

  - by Designer 17

  This is a follow up on another question I had asked on stackoverflow a day or so ago. I'm working on trying to call flickr.people.getPhotos... but no matter what I do I keep getting this... jsonFlickrApi({"stat":"fail", "code":99, "message":"Insufficient permissions. Method requires read privileges; none granted."}); but if you were to look at my "Apps You're Using" page (on flickr) you'd see this. So, even though I've authorized the max permissions... flickr says I don't have any granted!? I even used flickr.auth.oauth.checkToken to double check that my access token was right, this was the value returned; jsonFlickrApi({"oauth":{"token":{"_content":"my-access-token"}, "perms":{"_content":"delete"}, "user":{"nsid":"my-user-nsid", "username":"designerseventeen", "fullname":"Designer Seventeen"}}, "stat":"ok"}) Here's how I'm attempting to call flickr.people.getPhotos... <?php // Attempt to call flickr.people.getPhotos $method = "flickr.people.getPhotos"; $format = 'json'; $nsid = 'my-user-nsid'; $sig_string = "{$api_secret}api_key{$api_key}format{$format}method{$method}user_id{$nsid}"; $api_sig = md5( $sig_string ); $flickr_call = "http://api.flickr.com/services/rest/?"; $url = "method=" . $method; $url .= "&api_key=" . $api_key; $url .= "&user_id=" . $nsid; $url .= "&format=" . $format; $url .= "&api_sig=" . $api_sig; $url = $flickr_call . $url; $results = file_get_contents( $url ); $rsp_arr = explode( '&',$results ); print "<pre>"; print_r($rsp_arr); print "</pre>"; I am officially stumped... and in need of help. Thanks!

  Read the article

• Handling permissions in a MVP application

  - by Chathuranga

  In a windows forms payroll application employing MVP pattern (for a small scale client) I'm planing user permission handling as follows (permission based) as basically its implementation should be less complicated and straight forward. NOTE : System could be simultaneously used by few users (maximum 3) and the database is at the server side. This is my UserModel. Each user has a list of permissions given for them. class User { string UserID { get; set; } string Name { get; set; } string NIC {get;set;} string Designation { get; set; } string PassWord { get; set; } List <string> PermissionList = new List<string>(); bool status { get; set; } DateTime EnteredDate { get; set; } } When user login to the system it will keep the current user in memory. For example in BankAccountDetailEntering view I control the controller permission as follows. public partial class BankAccountDetailEntering : Form { bool AccountEditable {get; set;} private void BankAccountDetailEntering_Load(object sender, EventArgs e) { cmdEditAccount.enabled = false; OnLoadForm (sender, e); // Event fires... If (AccountEditable ) { cmdEditAccount.enabled=true; } } } In this purpose my all relevant presenters (like BankAccountDetailPresenter) should aware of UserModel as well in addition to the corresponding business Model it is presenting to the View. class BankAccountDetailPresenter { BankAccountDetailEntering _View; BankAccount _Model; User _UserModel; DataService _DataService; BankAccountDetailPresenter( BankAccountDetailEntering view, BankAccount model, User userModel, DataService dataService ) { _View=view; _Model = model; _UserModel = userModel; _DataService = dataService; WireUpEvents(); } private void WireUpEvents() { _View.OnLoadForm += new EventHandler(_View_OnLoadForm); } private void _View_OnLoadForm(Object sender, EventArgs e) { foreach(string s in _UserModel.PermissionList) { If( s =="CanEditAccount") { _View.AccountEditable =true; return; } } } public Show() { _View.ShowDialog(); } } So I'm handling the user permissions in the presenter iterating through the list. Should this be performed in the Presenter or View? Any other more promising ways to do this? Thanks.

  Read the article

• What permissions are required for SET IDENTITY_INSERT ON?

  - by AaronBertrand

  SQL Server 2000's SET IDENTITY_INSERT ON topic says: Execute permissions default to the sysadmin fixed server role, and the db_owner and db_ddladmin fixed database roles, and the object owner. While the SET IDENTITY_INSERT topic for SQL Server 2005 (and up) says: User must own the object, or be a member of the sysadmin fixed server role, or the db_owner and db_ddladmin fixed database roles. This was clearly adapted from the 2000 books online and re-written by someone who misinterpreted "db_owner...(read more)

  Read the article

• Correct permissions for /var/www and wordpress

  - by dpbklyn

  Hello and thank you in advance! I am relatively new to ubuntu, so please excuse the newbie-ness of this question... I have set up a LAMP server (ubuntu server 11.10) and I have access via SSH and to the "it works" page from a web browser from inside my network (via ip address) and from outside using dyndns. I have a couple of projects in development with some outside developers and I want to use this server as a development server for testing and for client approvals. We have some Wordpress projects that sit in subdirectories in /var/www/wordpress1 /var/www/wordpress2, etc. I cannot access these sub directories from a browser in order to set up WP--or (I assume) to see the content on a browser. I get a 403 Forbidden error on my browser. I assume that this is a permissions problem. Can you please tell me the proper settings for the permissions to: 1) Allow the developers and me to read/write. 2) to allow WP set up and do its thing 3) Allow visitors to access the site(s) via the web. I should also mention that the subfolder are actually simlinks to folder on another internal hdd--I don't think this will make a difference, but I thought I should disclose. Since I am a newbie to ubuntu, step-by-step directions are greatly appreciated! Thank you for taking the time! dp total 12 drwxr-xr-x 2 root root 4096 2012-07-12 10:55 . drwxr-xr-x 13 root root 4096 2012-07-11 20:02 .. lrwxrwxrwx 1 root root 43 2012-07-11 20:45 admin_media -> /root/django_src/django/contrib/admin/media -rw-r--r-- 1 root root 177 2012-07-11 17:50 index.html lrwxrwxrwx 1 root root 14 2012-07-11 20:42 media -> /hdd/web/media lrwxrwxrwx 1 root root 18 2012-07-12 10:55 wordpress -> /hdd/web/wordpress Here is the result of using chown -R www-data:www-data /var/www total 12 drwxr-xr-x 2 www-data www-data 4096 2012-07-12 10:55 . drwxr-xr-x 13 root root 4096 2012-07-11 20:02 .. lrwxrwxrwx 1 www-data www-data 43 2012-07-11 20:45 admin_media -> /root/django_src/django/contrib/admin/media -rw-r--r-- 1 www-data www-data 177 2012-07-11 17:50 index.html lrwxrwxrwx 1 www-data www-data 14 2012-07-11 20:42 media -> /hdd/web/media lrwxrwxrwx 1 www-data www-data 18 2012-07-12 10:55 wordpress -> /hdd/web/wordpress I am still unable to access via browser...

  Read the article

• Help recovering broken OS (permissions issue)

  - by Guandalino

  (At the bottom there is an important update.) I was doing experiments in order to backup a remote account to my local system, Ubuntu 12.04 LTS. I'm not confident with duplicity and probably, due to wrong syntax, some local files have been replaced with remote files. This is just a supposition, I'm not sure this is the real cause of OS corruption. The corruption happened after experimenting with backups, so I think I did something wrong at this regard. I was aware there was a problem when I tried to access a command using sudo: $ sudo ls sudo: unable to open /etc/sudoers: Permission denied sudo: no valid sudoers sources found, quitting sudo: unable to initialize policy plugin This is how /etc/sudoers looks like: $ ls -ald /etc/sudoers -r--r----- 1 root root 788 Oct 2 18:30 /etc/sudoers At this point I tried to reboot and now this is the message I get: The system is running in low graphics mode. Your screen, graphics card and input device settings could not be detected correctly. You will need to configure these yourself. I tried to follow the wizard to configure these settings, but without luck (the system prevents me going on when I press "Next"). The thing that makes me a bit less worried is that all the data on the disk seems readable and I'm able to access them using a live cd. I run memtest and RAM seems to be OK. Do you have any idea about how to recover my system? I'm very glad to provide further information, just let me know what info could be helpful. UPDATE. The issue is about wrong permissions and this is how I discovered: I mounted the root partition of the broken OS on /mnt/broken/ (live CD) and did ls /mnt/broken/. I got a permission denied error, while I expected to have the directory listing. I had to do sudo ls /mnt/broken/ and this worked. Thus without having root permission via sudo it's impossible to access the root of broken os. The current output of ls -ld /mnt/broken/ is: drwxr-x--- 29 1000 812 4096 2012-12-08 21:58 /mnt/broken Any thoughts on how to restore the old (working) set of permissions?

  Read the article

• Plesk file permissions - Apache/PHP conflicting with user accounts.

  - by hfidgen

  Hiya, I'm building a Drupal site which performs various automatic disk operations using the apache user (id=40). The problem is that the site was set up on a subdomain belonging to user ID 10001 (ie my main FTP account) so the filesystem belongs to that user ID. So I keep getting errors like this: warning: move_uploaded_file() [function.move-uploaded-file]: SAFE MODE Restriction in effect. The script whose uid is 10001 is not allowed to access /var/www/vhosts/domain.com/httpdocs/sites/default/files/images/user owned by uid 48 in /var/www/vhosts/domain.com/httpdocs/includes/file.inc on line 579. I've tried changing the apache group in httpd.conf to apache:psacln, psacln being the default group for all web users but that's not helped. The situation now is: ..../files/images/ = 777 and chown = ftplogin:psacln ..../files/images/user = 775 and chown = apache:psacln ..../files/tmp = 777 and chown = ftplogin:psacln So apparently uid 40 and 10001 both have permissions to write to any of the 3 directories involved, but still can't. Am i missing something here? Can anyone help? Thanks!

  Read the article

• local wordpress installation, plugin installation and file permissions

  - by user1205935

  I have a local wordpress installation and got everything working, until I tried to install a new plugin. Trying to activate the plugin, wordpress asked me for FTP connection information, which I understood to be a failure of write-access to the plugins directory. Apache runs as www-data, so I ran sudo chown -R www-data: /var/www/wordpress to make the wordpress directory writable for Apache. But now, I cannot edit the files as user anymore. Changing file permissions back to chown -R user: /var/www/wordpress/wp-content/themes, the wordpress dashboard complains again, that it doesn't have sufficient access. I tried various "solutions" online, but none have worked so far. Do I really need to install something like proftp and create an FTP user & password for my local server? Or can I circumvent the problem with some nifty file permission settings, which allow both me and Apache to access/write the files?

  Read the article

• Changing permissions on serial port

  - by Terrik

  I'm using the Arduino IDE in Ubuntu, and am having issues with the serial port. It has worked in the past, but for reasons that may be unnecesary, I felt the need to change the ownership of some of the files from root ownership to my users ownership. This made the IDE work correctly, but I lost the ability to use the correct serial port. In the dev folder, the port I need is listed as permission 166. Someone (who is no longer in the area to help me) swapped the permissions to 666, which made it all work gloriously. However, it reverted back as soon as I restarted my computer, and if I now try to use the command: sudo chmod 666 ttyACM0 nothing happens. No error messages, but no permission change either. How can I change it, and how can I get it to change permanently. I apologize if this question is overly simplistic or unclear, I'm an ubuntu noob, and I wouldn't begrudge feedback!

  Read the article

• Changing file permissions on USB external hard drive

  - by pacomet

  I am using an external USB hard drive for a long time in Ubuntu 10.04, both at work and at home. Now I've installed 12.04 at home. Today I used the USB drive for the first time. I can read the disk but can't change the permissions of a file I wanted. Output of "mount" /dev/sdb1 on /media/FREECOM HDD type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077, utf8=1,showexec,flush,uhelper=udisks) What I try sudo chmod u+w bsst-hdf_to_bsst-h5 and what I get -rw-r--r-- 1 paco paco 2956 dic 19 10:27 bsst-hdf_to_bsst-h5 Any idea would be appreciated. Thanks in advance

  Read the article

• Folder Permissions for new partition - can't move files

  - by user292743

  I'm using Ubuntu 14.04. I used the install CD to repartition my HD by resizing /dev/sda1 and creating /dev/sda3 as a Primary Partition. I named it "Media". When I reboot from HD, when I try to move files from the home directory to the new partition, I get an error message "Error while copying. The folder “TV” cannot be copied because you do not have permissions to create it in the destination." The new partition shows up in Gparted as locked, with mount point /media/ian/Media and Label Media. I want to move my media files from the boot partition to a separate partition. Any advice?

  Read the article

• How file permissions are stored in inode?

  - by Debadyuti Maiti

  Suppose there's two pc - "A" and "B". Then if A downloads a files from B , then what would be the file permission of that downloaded file? Is it possible that the downloaded file in A will have an Inode entry with all it's permissions from B & store B's user account as the owner ? If that's the case then is it impossible to change that files permission on A if "others" [as in user-group-others] doesn't have the right to write on that file? e.g. if this is the case , __x __x __x file.txt [On B] then what would be the file permission on A of that same file downloaded from B [e.g. through vsftpd]? __x __x __x file.txt [On A] or rw_x rw_x rw_x file.txt [On A] [i.e. defined by A's default umask value]

  Read the article

• Auto mount USB drive with permissions for all users

  - by oneaustin

  I have an Ubuntu 14.04 based Media Center and I store the media files on a USB HDD. I add files to drive directly on a Mac so I have it formatted as FAT32. The problem is that after reconnecting the drive to the Ubuntu, it mounts at /media/user/drivename and only the root user is allowed access. I need several applications to have full access to this drive. I can change file permissions in the terminal but it doesn't change because of the /media/user location. I am able to manually sudo mount /dev/sdc1 /media/drivename & sudo chmod 777 /media/drivename but the mount point changes each time. Is there a way to make this drive always mount where root and other applications have access?

  Read the article

• I need to get past my permissions to recover data

  - by adsmz

  Due to some mishaps, I am unable to boot into Kubuntu at all. However, my data is still on the hard drive. I managed to get one of the other two computers to which I have access to read the disk by booting into a liveCD session of kubuntu. The only storage medium to which I have access is a 30 GB data stick. Here's where the trouble starts: In music alone, I have to back up about 60 GB. Obviously this is going to have to be split into chunks and moved over to the second spare PC until I can reinstall Kubuntu on my laptop. All of the data that needs backed up is behind a permissions wall, so while I can view it, I can't interact with it directly. I know copying and moving through the terminal can get around this with sudo cp or sudo mv, but is there a way to first compress multiple folders in a single archive, then move it? (While we're on the subject, what compression method would be best for large volumes of music in MP3, WAV, and OGG format?)

  Read the article

• DFSR NTFS Permissions Not Working!??!

  - by megadood

  I have two windwos 2008 standard servers running DFSR okay. I can create a file on one server, it is replicated to the other okay etc. I have the namespace shared folder on each server shared with full control administrators / everyone change/read permissions. I then browse to the folder on server 1 e.g.\server1\namespace\share\folder1. I right click the folder, and configure the NTFS permissions as I would like for example Adminsitrators Full Control / One User Read/Write Access / No other users in the user list. I save this and then double check the second server e.g. \server2\namespace\share\folder1. I right click the same folder name as before and can see the NTFS permissions have replicated accordingly. I right click the folder and go to properties - security - advanced - effective permissions and select a user that shouldnt be able to get into that folder e.g. testuser. It agrees with the NTFS permissions and shows that testuser has no ticks next to any permissions so should be denied access. I logon to any network PC or the server as testuser. Browse to \server1\namespace\share\folder1. It lets me straight in, no access denied messages. The same applies to server2. It seems as thought all my NTFS permissions are being ignored. I have 1 DFS share and then all the subfolders are a mixture of private folders and public folders so need the NTFS permissions to work ideally. Any idea whats going on? Is this normal? From my tests all users can access any DFSR folder under the namespace\share which is quite worrying. Thanks

  Read the article

• Permissions problem running Apache ActiveMQ

  - by Edd

  I'm wanting to use Apache ActiveMQ on Ubuntu 12.04 LTS, but am running into what looks like a permissions problem when I try to run it as follows: edd:~$ sudo activemq --version INFO: Loading '/usr/share/activemq/activemq-options' INFO: Using java '/usr/lib/jvm/java-6-openjdk//bin/java' INFO: changing to user 'activemq' to invoke java Java Runtime: Sun Microsystems Inc. 1.6.0_24 /usr/lib/jvm/java-6-openjdk-amd64/jre Heap sizes: current=502464k free=499842k max=502464k JVM args: -Xms512M -Xmx512M -Dorg.apache.activemq.UseDedicatedTaskRunner=true -Dactivemq.classpath=/var/lib/activemq//conf;; -Dactivemq.home=/usr/share/activemq -Dactivemq.base=/var/lib/activemq/ ACTIVEMQ_HOME: /usr/share/activemq ACTIVEMQ_BASE: /var/lib/activemq ActiveMQ 5.5.0 For help or more information please see: http://activemq.apache.org edd:~$ sudo activemq start INFO: Loading '/usr/share/activemq/activemq-options' INFO: Using java '/usr/lib/jvm/java-6-openjdk//bin/java' INFO: Starting - inspect logfiles specified in logging.properties and log4j.properties to get details INFO: changing to user 'activemq' to invoke java -su: line 2: /var/run/activemq.pid: Permission denied INFO: pidfile created : '/var/run/activemq.pid' (pid '7811') edd:~$ sudo activemq status INFO: Loading '/usr/share/activemq/activemq-options' INFO: Using java '/usr/lib/jvm/java-6-openjdk//bin/java' ActiveMQ not running edd:~$ ps ax | grep 'activemq' 8040 pts/0 S+ 0:00 grep --color=auto activemq I installed ActiveMQ using sudo apt-get install activemq. Apologies if there's any additional information missing - I'm fairly new to Linux as you may well have guessed!

  Read the article

• Samba Server Make Multiple User Permissions Profiles

  - by Scriptonaut

  I have a Samba file server running, and I was wondering how I could make multiple user accounts that have different permissions. For example, at the moment I have a user, smbusr, but when I ssh to the share, I can read, write, execute, and even navigate out of the samba directory and do stuff on the actual computer. This is bad because I want to be able to give out my IP so friends/family can use the server, but I don't want them to be able to do just anything. I want to lock the user in the samba share directory(and all the sub directories). Eventually I would like several profiles such as (smbusr_R, smbusr_RW, smbguest_R, smbguest_RW). I also have a second question related to this, is SSH the best method to connect from other unix machines? What about VPN? Or simply mounting like this: mount -t ext3 -o user=username //ipaddr/share /mnt/mountpoint Is that mounting command above the same thing as a vpn? This is really confusing me. Thanks for the help guys, let me know if you need to see any files, or need anymore information.

  Read the article

• Samba new file ownership, permissions configuration

  - by Martin Melka

  I have recently installed Samba on my server. Now I have a question about permissions and how to set it up. Currently I mount the Samba shared drive to my laptop with this line in /etc/fstab: //<host>/share /mnt/melka-server-data/ cifs username=<usrname> password=<passwd> _netdev 0 0 This works, as I can read from the files and create them (as root). The problem is when I want to create files as a regular user. I always get a Permission Denied error. These are ll outputs of the mounted folder: magicmaster@magicmaster-kubuntu:/mnt$ ll total 8 drwxr-xr-x 3 root root 4096 lis 11 14:15 ./ drwxr-xr-x 26 root root 4096 ríj 26 11:01 ../ drwxrwxrwx 8 magicmaster magicmaster 0 lis 12 22:12 melka-server-data/ and the inside: magicmaster@magicmaster-kubuntu:/mnt/melka-server-data$ ll total 4 drwxrwxrwx 8 magicmaster magicmaster 0 lis 12 22:12 ./ drwxr-xr-x 3 root root 4096 lis 11 14:15 ../ drwxrwxrwx 5 magicmaster magicmaster 0 lis 12 09:35 downloads/ drwxrwxrwx 2 magicmaster magicmaster 0 ríj 28 12:57 lost+found/ drwxrwxrwx 15 magicmaster magicmaster 0 lis 12 09:45 movies/ drwxrwxrwx 2 magicmaster magicmaster 0 lis 1 21:15 newest/ drwxrwxrwx 3 magicmaster magicmaster 0 lis 2 23:14 photos/ drwxrwxrwx 2 magicmaster magicmaster 0 ríj 30 12:44 software/ -rw-r--r-- 1 nobody nogroup 0 lis 12 22:12 zdar I called sudo chown -R magicmaster:magicmaster melka-server-data/ to try and change all the files to belong to me. Then the file zdar was created by magicmaster just by calling touch. I got the Permission Denied, but it was still created, though it belongs to nobody and I can't write into it. When I create a file as root, it still belongs to nobody, but at least I can write into it. What am I missing? I didn't notice anything in Samba config that would be related to this and I don't like the idea of having to log on as root in order to copy files.. Thanks

  Read the article

• Localhost permissions given different values in fireftp and cs4 dreamweaver

  - by YsoL8

  While testing a file uploader on my localhost ( mamp on mac ) I've hit a problem. Trying to fix a folder permissions problem, I used CS4 Dreamweaver's permissions screen to set 0777 permissions. However these wouldn't apply and stayed stuck on 0, so I opened fireftp and accessed the folder in the local panel. The permissions there are 0777. So I have a folder that has permissions of 0 and 0777 at the same time. How can I resolve this and make sure the permissions are 0777?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >