Search Results

Search found 430 results on 18 pages for 'realtek'.

Page 3/18 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • realtek lan driver problem - win 7

    - by tango _123
    Hi, my new notebook (ACER TM 8371) with Win 7(x32) professional as OS, has strage behaviour with respect to LAN. when I plug or unplug my charger cable, or my notebook goes in stad-by, or just a do nothing, the netwrok connection is lost. All the energy savings functionbality have been in-activated. if i check the network adapter information, it says "a network cabel is unplugged or corrupted", but it is not true.....the cable is in and it is not corrupted (i tried several which works on other machines). if a tried to di-habilitate and hence re-habilitate, it allows di-habilitation and not to further re-habilitate (it says "no driver for the network card" are available). in some cases, also, the driver disappears (i cannot see it anylonger). if i restart the notebook, everything comes back to normality, but.....today in 3 hours i had to restart 6 times!!! can anyone help me? win 7 says the driver is the last one, so no need to update it. here are some techinical information aboiut network card and driver: Name [00000015] Realtek PCIe GBE Family Controller Adapter type Ethernet 802.3 Product type Realtek PCIe GBE Family Controller Installated YES ID device PNP PCI\VEN_10EC&DEV_8168&SUBSYS_02831025&REV_02\4&266E4C4F&0&00E2 last reset 20/11/2009 11:27 Index 15 Service name RTL8167 I/O Port 0x0000FF00-0x0000FFFF Memory address 0xE2500000-0xE2500FFF Memory address 0xE1400000-0xE140FFFF IRQ Channel IRQ 18 Driver c:\windows\system32\drivers\rt86win7.sys (7.3.522.2009, 164,00 KB (167.936 Byte), 28/08/2009 22:12)

    Read the article

  • How to get wireless (Alfa) operate in full power and speed up wireless Internet?

    - by MahboobeAlam
    I am using Wireless to connect to the internet (router). My laptop has Atheros wireless (AR 242x/542x) adapter but the router is a little bit far-away from my room so I have to use an external wireless adapter i.e. Alfa (Realtek 8187) for connectivity. However, since I have started using Ubuntu I noticed that Alfa is not working in full power, internet speed in Ubuntu is much slower than in Windows on my laptop. When I am using Windows 7 the LED (bulb) on Alfa blinks as it should, but when in Ubuntu, it doesn't blink rather it is on but very dim. Connection using Atheros adapter is also the same (slow)... I have tried 4 methods (I found on the Internet) to troubleshoot this matter but no success. It seems to me that Ubuntu/Linux is not letting these wireless adapters to operate in full strength. iwconfig shows that power management is off for both. So what's the problem? Details: ifconfig eth0 Link encap:Ethernet HWaddr 00:1f:16:1e:36:ec UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1657 errors:0 dropped:0 overruns:0 frame:0 TX packets:1657 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:241697 (241.6 KB) TX bytes:241697 (241.6 KB) wlan0 Link encap:Ethernet HWaddr 00:22:5f:9b:24:b5 inet6 addr: fe80::222:5fff:fe9b:24b5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:715460 errors:0 dropped:0 overruns:0 frame:0 TX packets:694246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:493539292 (493.5 MB) TX bytes:235159393 (235.1 MB) wlan1 Link encap:Ethernet HWaddr 00:c0:ca:42:14:62 inet addr:192.168.100.102 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::2c0:caff:fe42:1462/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:171053 errors:0 dropped:0 overruns:0 frame:0 TX packets:181363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:74094659 (74.0 MB) TX bytes:59474204 (59.4 MB) iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off wlan1 IEEE 802.11bg ESSID:"Zia" Mode:Managed Frequency:2.412 GHz Access Point: 00:0D:F0:9C:A6:18 Bit Rate=54 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-31 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:204 Invalid misc:6610 Missed beacon:0

    Read the article

  • kubuntu: wireless manager can't find any networks

    - by timuçin
    I just installed Kubuntu 12.10 and as I knew my wireless driver would not be recognized, I installed it manually through here. I suppose I shall mention that I also had to do this. The driver worked just fine until I restarted my system. Since then I can't even start over. My wireless card is realtek 8723 The oly lead I have is this piece of log: 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> wpa_supplicant started 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0) supports 4 scan SSIDs 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): supplicant interface state: starting -> ready 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <warn> Trying to remove a non-existant call id. 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0): supplicant interface state: ready -> inactive 11/14/12 07:35:21 AM timucin-W150ER NetworkManager[989] <info> (wlan0) supports 4 scan SSIDs I feel really bad that I have been trying so many things and even while I am trying them I get a problem at every step. I am really frustrated. You can the time in the logs, I didn't get up early. Just needed to share my feelings. Even the ethernet cable I have use is short for God's sake, I have had to sit at this massively uncomfortable posture for hours. edit: I discovered something interesting. When I boot my windows I see that my wireless manager says "disconnected" now. However when I start ubuntu after windows and modprobe rtl8723e wireless works just fine. Then again, when I restart ubuntu I am back where I have started. So now I have to start windows, restart my machine and do the modprobe thing to see wireless networks.

    Read the article

  • Realtek RTL8201 CL/PL NETWORK DRIVER

    - by Marin
    Can anyone help me please?I had to formate my friends computer & she didn't have the motherboard cd so I have to download the Network Driver from internet! I need Realtek RTL8201 CL/PL NETWORK DRIVER but I can't find the right link to download it!Can you please help me?Thank you;)

    Read the article

  • WOL for Asus M5A97 built in Realtek Network Adapter

    - by madphp
    I cant get wake on lan to work for my built in network adapter. Its a ASUS M5A97 motherboard, and the network adapter is a Realtek PCIe GBE. I have Shutdown WakeOnLan - Enabled Wake on Magic Packet - Enabled Wake on Pattern Match - Enabled WOL & Shutdown Link Speed - 10 Mbps First I have set up a magic packet client to listen, and the packet is getting through. I have also checked these in Power Management for the network adapter. Allow the computer to turn off this device to save power Allow this device to wake the computer Allow a magic packet to wake the computer.

    Read the article

  • Realtek HD Audio playing weird with certain video formats

    - by dyasny
    Hi, I have a Gigabyte motherboard with an onboard Realtek HD sound card. The card is working perfectly everywhere, except for a single video format, where the voice is distorted, sounds as if it's been passed through a metal tube. Been googling for this, but couldn't find an answer anywhere. The movie plays fine on other systems (got Linux everywhere else), but on this one (winXP-x64-sp2) it just doesn't. Here are some details: MPC: Type: KLCP WMV File Audio: 0x000a 22050Hz mono 20Kbps [Raw Audio 0] Video: Windows Media Video 9 400x300 29.97fps 227Kbps [Raw Video 1] VLC: Codec: wmas Sample rate: 22050 Bits per sample: 16 Bitrate: 20kb/s

    Read the article

  • 5.1 Surround Channels are Jumbled

    - by stickynips
    I had this exact setup working previously, but after a reformat it went screwy on me. I have an Onkyo A/V Receiver hooked up to my PC, via optical S/PDIF. Attached to the receiver is a 5.1 speaker setup (tested and working fine with my Xbox via the receiver). It seems to me that the audio channels are getting mixed up somehow between the PC and the receiver. I have a 5.1 test file which plays a sounds through each speaker individually. The channels are mixed as such: "Left Front" plays through my Right Front speaker "Center" plays through my Left Front speaker "Right Front" plays through my Center speaker "Left Rear" plays through my Subwoofer "Right Rear" plays through my Left Rear speaker I've tried downloading the latest Realtek HD Audio Drivers and the Realtek HD Audio Manager, but neither makes any difference. If there's a way I can manually rearrange the channels I believe it would fix the problem, but as far as I know this is impossible. edit: Sorry, I've forgotten some basic info. I'm running Windows 7 x64. The sound card is Realtek ALC892 embedded in a GIGABYTE GA-890GPA-UD3H AM3 motherboard.

    Read the article

  • Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169 with 2.6.39 kernel

    - by Dean Thomson
    I've been getting an issue since upgrading to 2.6.39 in Natty from the Kernel-PPA repository. When I do a sudo update-initramfs -u I get the following error message. update-initramfs: Generating /boot/initrd.img-2.6.39-0-generic-pae W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169 I did notice that firmware wasn't in the allocated directory. Does anyone know where to get the firmware files for this.

    Read the article

  • Toshiba Satellite C850, Wlan, rtl8188ce not working

    - by Hans
    I installed Ubunto 12.04 onto a brand new Toshiba Satellite C850 64 bit laptop. Wlan does not work, Tries to connect, gives up after some time. $Windows7 works 100%. There appears to be a problem with the driver. The actual hardware is a rtl8188ce chip. The firmware & driver loaded by Ubunto is for the rtl8192ce chip. How can I get and install a driver and firmware for Ubunto 12.04 and rtl8188ce?

    Read the article

  • Wifi speed with driver rtl8187 drops

    - by Peter
    I am using lucid lynx with this USB adapter and drivers rtl8187. When I start a download, it starts at 1500kpbs (if i use "iwconfig wlan0 rate [more than 11MB]" it starts at a lower speed), it transfers a few kbs but then the speed starts to drop constantly and nothing is being transferred. I've also tried the driver r8187, but I have the same speed problem only that with this driver the download starts at only 10kbps, and drops from there. What can I try to identify the cause and fix this problem?

    Read the article

  • Internet Timeouts with TP-Link TL-WN821N wireless usb stick - existing solutions dont work

    - by Sheena
    I'm running Ubuntu12.04 and I'm trying to get a TP-Link TL-WN821N to work. The solution from Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick didn't work for me. Neither has anything else... I've installed rtl8192cu as per instructions I found elsewhere to no avail. The symptoms I am experiencing are: When I plug in the device the PC can see and connect to wireless networks fine. The network I'm using has internet access and the signal strength is pretty strong. I can't ping and I can't browse the internet (timeout). Any ideas? I'm not sure what the next step would be or what information would be useful at this point.

    Read the article

  • Wireless USB Adapter driver configuration

    - by Jones
    First I would like agree one thing that this is fully for Ubuntu, not for BackTrack. However I'm posting my BackTrack question here since I find similar problems in backtrack forum are being unanswered and Linux/Unix site of StackExchange has very low attraction. I'm having USB wifi adapter (iBall Baton), having chipset RTL8191SU. It displays available wifi networks in Wicd manager. But while trying to connect it gives me bad password. When I'm trying to run airmon-ng it didn't returned me the monitor mode. I tried to replace with Ubuntu 12.10 drivers. But it totally nulled the device functionality. However I restored the drivers. I'm interested to compile drivers as if anyone indicate the methods. Awaiting ideas!

    Read the article

  • Need a few reboots to connect to wireless

    - by Debajyoti Nandi
    I am running xubuntu 12.10 on my msi wind U100 netbook. I have a problem with the wireless connection. Whether the wireless connects automatically to a known wifi hotspot (both at home and starbucks) is temperamental. Sometimes I need to reboot one or more times to get it connected. Otherwise, it tries and keep asking me to enter the password (which is saved and when it works it does, so the problem is not with the password). Every time my computer awakes up from sleep the same problem. I have to do a reboot to connect to wireless. I searched everywhere but found no solution. I would greatly appreciate if someone has any solution. I will gladly share the hardware/software or config info, if asked, but I don't know exactly what to share and where to find them. Thanks you for any help.

    Read the article

  • rt2800 wireless keeps disconnecting

    - by Matthew Fumi
    My HP dm1 laptop has a rt2800sta wlan driver. My wireless doesn't usually have a problem connecting to a network, yet sometimes it does. The biggest issue I have found is that when it does connect, it doesn't stay connected. It continually connects and disconnects to the network. Does anyone know why this is happening, and how I would go about fixing the issue? Thank you and look forward to trying your solutions.

    Read the article

  • Removing a module when I add a new better one?

    - by yinon
    I'm using this guide to install my TL-WN822N (Wireless/Wifi). I need to add 8192cu at the end of /etc/modules, but I see another module there (Copy-Paste file): # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. # Parameters can be specified after the module name. lp 8192cuvhba vhba Should I remove it or is that unnecessary? Thanks for any help!

    Read the article

  • Slow internet connection with a Digicom Wireless 11n 300m (rt2800)

    - by beboka8
    After upgrading to ubuntu 11.10 the speed of my internet connection has considerably reduced. I surf on internet using a wireless usb adapter Digicom Wireless 11n 300m which works with rt2800usb driver. The fact is, on the installation cd there's no tracks of that driver but instead of it there is another one called rt2870 which I tried to load using ndiswraper, but it did not recognize any hardware. I'm not sure the solution of my problem is simply changing the driver, but I have no other ideas. Can anyone help me?

    Read the article

  • Bluetooth radio device is not available

    - by Mike
    I reinstalled my Windows 7 operating system, and have since been unable to detect my Logitech m555b bluetooth mouse. Here is some info about my system: I have have a working connection with a bluetooth printer. I have a message in the "My Bluetooth" section of explorer stating "Bluetooth radio device is not available". The Device Manager indicates that the Generic Bluetooth radio is working correctly. The bluetooth "F12" switch is on. Mouse batteries are new and the right way around. I'm presuming that I need a bluetooth driver which is non generic. The computer is a Clevo P150HMx (the version with the GTX485 GPU) with the default WLAN / bluetooth combo card manufactured by Realtek (I think it's a Realtek RTL8188CE card). I think I have the drivers installed, but I still get the generic driver in the Device Manager. I'm confused. Please help, I'm going mad on the touchpad. (Thanks for the touchup wizlog)

    Read the article

  • RTL8192SU + RTL8191E Linux Issue Installing Driver

    - by s32ialx
    OK I've read tons of fourms of people getting the onboard RTL8191E working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? new in Mandriva Linux Control Center 2010.0 it shows up in Other/Unknown as RTL8191S WLAN Adapter and on the right pane this shows up Identification Vendor: ?Manufacturer Realtek Description: ?RTL8191S WLAN Adapter Media class: ? Connection Bus: ?USB Bus PCI #: ?1 PCI device #: ?5 Vendor ID: ?0x0bda Device ID: ?0x8172 Sub vendor ID: ?0x0000 Sub device ID: ?0x0000 Misc Module: ?rtl819xU In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

    Read the article

  • Youtube has no voice but the music continues just fine?

    - by Prix
    PC CONFIG: gigabyte EP45C UD3R with the realtek HD onboard 4gb dual channel Qcore 2.83ghz When i watch to videos on youtube now the voice some times is in static and some times so low that you can hear it while the sound continues just fine... For example if can hear to things like guitar or a train etc but the voice of whoever is speaking is gone or very low or pure static when watching the videos. I know some videos have a really great quality and some are HD 1080p so this was something not expected to happen. I can aswell play videos on my WMP11 just fine i have ccc-p installed also tried k-lite, both on the latest stable avaiable. I havent tried anything else related to flash but something is either wrong with my drivers or youtube. I have installed the latest drivers to make sure they are up-to-date but this didnt help either. What i have tried so far: removed the audio drivers and re-installed remove any codec pack i had and re-installed k-lite, test, didnt worked remove any codec pack i had and re-installed cccp, test, didnt worked checked the control panel sound configurations, tried chaging to phone stereo, to 5.1 which is what my headphone is. checked the realtek manager, tried changing the sound channels from 2CH to 6CH to reflect my headphone, didnt work. rebooted after every change of the above tries. tried chrome, firefox and internet explorer with the same results didnt w

    Read the article

  • Realtek "Microphone Effects" no longer working

    - by abc
    I have a mic plugged into my computer, and I was able to use the "microphone effects" tab here to enable/disable noise suppression and acoustic echo cancellation. Noise suppression off and acoustic echo cancellation on were the most recent settings I had on before the problem occurred. I disabled my mic in the windows 7 "recording devices" tab, then re-enabled it. When it came back, these options were grayed out, and remained so even after a reboot. I am not sure why this is or how to fix it, all other options are still the same (Settings are identical to when it was working). Any ideas whats wrong or how to fix it? edit: can't post image due to being new.

    Read the article

  • Why maximum 1.0 Gbit Ethernet connection an old notebook, and only 100 Mbit on newer faster computer

    - by Sam
    Strange problem about Ethernet speed: recently we bought an i7 core computer running Win7 64 bit with an onboard Gigabit Ethernet controller (Realtek PCIe Gbit Ethernet Family controller). Connecting this new fast pc directly to our brand new ASUS Gigabit Ethernet router via CAT6 cable(!) shows up the adapter status (see picture attached) only 100mbit, while the router is capable of 1000 mbit. More facts: Connecting an 8 year old IBM notebook with gigabit ethernet to the same cable end shows 1.0 Gbit connection in its adapter status. Speedtest.net shows 35 mbit/s down on the new computer Speedtest.net shows 78 mbit/s down on the old rusty IBM notebook. We have an 120 mbit down internet connection, which we we truly receive on another pc (also directly connected to the router) How to get the 1.0 Gbit going in the new pc ?

    Read the article

  • How would you diagnose an integrated network card that doesn't show up on the device list?

    - by Tomer Gabel
    I've been setting up a server based around a Gigabyte GA-G33M-DS2R motherboard (G33, PCH9R with integrated Realtek 811B network device. I've enabled it in the BIOS, but it doesn't show up in the pre-boot PCI device list, isn't recognized by Windows (even after installing the chipset and networking drivers) and doesn't even show up via lspci. I've tried cycling power, disabling, cycling again, enabling, cycling again etc. to no avail. I'm sort of at a loss at this point; the board isn't under warranty anymore, but I'd rather not have to replace it. Any advice would be greatly appreciated...

    Read the article

  • Ubuntu/Linux version recommendation for HP dv6 3122TX?

    - by sanjayav
    I purchased a HP dv6 3122TX recently and after installing Ubuntu 10.10 64 bit I ran into multiple issues like, The wireless driver is not supported by Uubntu. (1) [The driver is RaLink RT3090 ] The ethernet stopped working sometimes for no reason [The driver is Realtek RTL8111/8168B ] "Corrupted low memory at ..." issue which is described as a kernel bug in Ubuntu support forums. (It started to take me to a terminal instead of the GUI and couldn't start x server after that) As I'm not an expert Ubuntu user I got fed up of all these issue and got back to Windows 7. But I need an Ubuntu installation up and running for my development work. What are your suggestions about a reasonable Ubuntu version that I should try? Or a different Linux variation? Should I stick to a 32-bit version? It'd be great anyone can give some advice on this issue.

    Read the article

  • No audio driver for ECS 7050-M v1.0a for Windows 7?

    - by NudeRaider
    I have an Elitegroup 7050-M v1.0a motherboard and I've used the Realtek HD audio driver it came with for years under Windows XP. There was a nice mixer panel, an equalizer and sound profiles that added effects. All of these menus are gone now that I've moved on to Windows 7 64 Bit. All I have is the basic settings under system control - sound, but they are not nearly as detailed. To clarify: Sound works, but the advanced settings I got when using older OS's are gone. Older drivers don't seem to work under Win7 and I can't find one for Win7. So how can I fully utilize the capabilities of my HD sound chip under Win7?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >