Search Results

Search found 276 results on 12 pages for 'vaio'.

Page 3/12 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• How yo set up a Sony Vaio PCG-4121EM 3G modem?

  - by Ivan

  We've bought a Sony Vaio PCG-4121EM supposed to have a built-in 3G modem. It has a SIM-card slot at its bottom. We've inserted a newly-bought SIM-card but nothing happened and the modem is still not visible among the computer devices (neither in Windows device manager nor in "Modems" Control Panel applet). How to turn it on? I would usually seek to turn a built-in device in the BIOS setup, but there seem to be no BIOS setup on this Vaio - Windows 7 splash screen appears immediately as I turn the computer on.

  Read the article

• Special keyboard keys?

  - by Hailwood

  I have a new laptop, It has the icon for toggling the touchpad on fn+f1 so I would like to assign this shortcut, I have a working script, and I can assign the script to any other combination, but it appears that ubuntu does not pick up the fn+f1 combination? how can I correct this? The other one is, My laptop has three extra buttons, Assist, Web, and Vaio. These map to Help, Homepage, and nothing respectively. the Web button is working perfectly. The assist button if I am setting up a keyboard shortcut for something it binds fine, but then pressing it does nothing? The Vaio button seems to not be listened to much like the combination I posted above. How can i correct the assist and Vaio buttons?

  Read the article

• Attempting to dual boot Ubuntu and Windows 7 on Sony Vaio with Insyde H2O BIOS

  - by zach

  My situation is the same that is addressed here Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI and here http://www.hackourlife.com/sony-vaio-with-insyde-h2o-efi-bios-ubuntu-12-04-dual-boot I tried to install Ubuntu 12.04 from the Live CD alongside my current Windows 7. I have to switch my BIOS to legacy mode in order to boot from CD. If I were to do a normal installation and remain in legacy mode, the BIOS will display "operating system not found". If I switch back then the BIOS just boots to windows. To solve the problem, I tried following the steps in the previous two articles. My drive is partitioned as: sda1 FAT32 Location of Windows EFI files (flagged as boot in Ubuntu install) sda2 unknown sda3 NFTS Windows C: sda4 ext4 Ubuntu root sda5 swap sda6 ext4 Ubuntu home I was a little confused by the requirement in the second article to "be careful to install Grub bootloader in /dev/sda3" In my case, the relevant partition is sda1. I have tried three things: setting the sda1 mount point as /boot, as /boot/efi, and as the special reserved grub partition. In each install I indicated that grub should be installed in sda1. After each install I reboot to the live CD and look in the sda1. I see EFI/Boot and EFI/Windows, but no EFI/Ubuntu and consequently no grubx64.efi. I understand the recommended procedure of moving grubx64.efi into the EFI/Boot directory and replacing the present bootx64.efi file, but I see no grubx64.efi and I don't know where it should be.

  Read the article

• How to restart boot Windows 7 after upgrading to a SSHD on SONY VAIO with recovery discs?

  - by Boris Okun

  The original HDD on my Sony VAIO still works, but has a damaged sector 0 and I was constantly prompted to replace the HDD because of the imminent failure. I created recovery discs as instructed, used a USB external HDD for complete back up (including Windows image back up). After installing the SSHD and using recovery discs to upload Windows and boot, I am getting the Windows welcome screen. Right after that, I'm getting the following message: Windows couldn't complete the installation. To install Windows on this computer, restart the installation. I have tried repeating the process many times all kinds of different ways and I still receive the same message. Also, when I tried to change to partitioning as the other option offered, I get the message: Windows Setup could not configure Windows to run on this computer's hardware. All troubleshooting for hardware and PCU came out solid. I tried to load the image back up from the external drive, but can't load the driver. The computer doesn't see it. Does anyone have a clue or has encountered something similar?

  Read the article

• Sony Vaio VPCS111FM

  I recently got Sony Vaio VPCS111FM/S and I have to say, this is the best laptop I have ever hand in my life. I highly recommend it. Read more...

  Read the article

• Turn off keyboard back-light Sony (VAIO SVF1521DCXW)

  - by KasiyA

  I have a Sony laptop and I want to turn keyboard back-light off. It doesn't have a shortcut function key for doing this on the keyboard . I can turn off it with VAIO Control Center in Windows but I don't know how can I turn it off in Ubuntu 14.04. There isn't available to me: /sys/devices/platform/sony-laptop/kbd_backlight doesn't exist on my machine. I have this folder /sys/devices/platform/sony-laptop/ and there is three folder one power folder and two shortcut-ed folder driver , subsystem and five file contains battery_care_health , battery_care_limiter , modalias , touchpad and event This is the output of running sudo modinfo sony-laptop: filename: /lib/modules/3.13.0-34-generic/kernel/drivers/platform/x86/sony-laptop.ko version: 0.6 license: GPL description: Sony laptop extras driver (SPIC and SNC ACPI device) author: Stelian Pop, Mattia Dongili srcversion: 5C6E050349475558A231C59 alias: acpi*:SNY6001:* alias: acpi*:SNY5001:* depends: intree: Y vermagic: 3.13.0-34-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 50:0B:C5:C8:7D:4B:11:5C:F3:C1:50:4F:7A:92:E2:33:C6:14:3D:58 sig_hashalgo: sha512 parm: debug:set this to 1 (and RTFM) if you want to help the development of this driver (int) parm: no_spic:set this if you don't want to enable the SPIC device (int) parm: compat:set this if you want to enable backward compatibility mode (int) parm: mask:set this to the mask of event you want to enable (see doc) (ulong) parm: camera:set this to 1 to enable Motion Eye camera controls (only use it if you have a C1VE or C1VN model) (int) parm: minor:minor number of the misc device for the SPIC compatibility code, default is -1 (automatic) (int) parm: kbd_backlight:set this to 0 to disable keyboard backlight, 1 to enable it (default: no change from current value) (int) parm: kbd_backlight_timeout:meaningful values vary from 0 to 3 and their meaning depends on the model (default: no change from current value) (int) With the suggested command: sudo modprobe -r sony_laptop sudo modprobe -v sony_laptop kbd_backlight=0 Output was: insmod /lib/modules/3.13.0-34-generic/kernel/drivers/platform/x86/sony-laptop.ko kbd_backlight=0 It doesn't seem to affect the keyboard backlight. And also trying this command: sudo modprobe -v sony_laptop kbd_backlight_timeout=3 kbd_backlight=0 and doesn't seem to effect the keyboard backlight I also test it after restart laptop, And I didn't see any effect too. Important : By default, keyboard backlight is off; when I press a key it turns on and after 15 seconds it turns off again. It's the same result on battery and AC power I followed also http://ubuntuforums.org/showthread.php?t=2139597 and Keyboard backlighting not working on a Vaio VPCSB11FX but didn't work so.

  Read the article

• unable to change brightness settings in sony vaio e series laptop

  - by yashwanth

  I am using Sony Vaio E Series VPCEH25EN laptop. I installed ubuntu 12.04 64 bit version and I couldn't change my brightness level. Always it is showing max brightness, I tried to change by using echo 0 | sudo tee /sys/class/backlight/acpi_video0/brightness command. When I run the above cmd it showing output as 0 but there is no change in brightness level. please help out how to change brightness levels.

  Read the article

• Backlight screen flickering on a Sony Vaio VPCYB15AL

  - by Mario Zavala

  I've just installed Ubuntu 11.10, and everything went just now when the computer got into suspension, when it got back the screen started flickering, specially on the dashboard, it trends to disappear when i turn down the backlight, at first it was fixed by rebooting the system and now, every time that I start Ubuntu as soon as the desktod loads it starts flickering again, please help! I have a Sony VAIO VPCYB15AL AMD Dual Core E350 with an ATI HD 6310.

  Read the article

• Sony Vaio Webcam

  - by Martin H

  I have a in-built webcam in my Sony Vaio VGN-FE21M. lsusb shows me the device Bus 001 Device 003: ID 0ac8:c002 Z-Star Microelectronics Corp. Visual Communication Camera VGP-VCC1 and it is working within Skype most of the time. Sometimes, however, lsusb shows me the exact same output, but trying to test my cam in v4l2ucp I get the error Unable to open file /dev/video0 No such file or directory A reboot fixes the problem but I just can't pinpoint what the difference is between a working and a not working webcam and the time/instance this occurs. It would probably be a fix if i could unmount and remount the cam, but how can I do this with in-built devices? Any other advice is welcome as well.

  Read the article

• HDMI port not recognized on Sony Vaio

  - by julio

  I am running Ubuntu 11.10 64bit with a Sony VAIO VPC F11. It has an NVIDIA GeForce 310M video card, with the latest Nvidia drivers for the 64 bit linux, and a Windows partition with Win7 64bit. NVIDIA driver version is NVIDIA-Linux-x86_64-280.13 External monitor is Samsung SyncMaster P2770 If I boot into the Windows partition, the HDMI works as expected, with sound and video-- under linux, the HDMI port is not recognized at all, apparently, and provides no signal to the attached monitor. The nividia-settings tool does not recognize any monitor connected to the HDMI port. Disper is installed and cannot recognize an attached external monitor. Can anyone help me diagnose this issue and fix it if possible? The laptop has only the one HDMI port to connect any external monitor, so it I can't get this working I'm stuck using either the laptop screen or Windows. Thanks

  Read the article

• Battery icon constantly empty when discharging Vaio VGN-FZ210CE

  - by Alex

  I have a Sony Vaio VGN-210CE laptop, and its battery does not report the drain rate properly. In 11.10 and earlier, the battery icon would update with the percentage, not the estimated time. In 12.04 and 12.10, it estimates by time, which is always some very low value because the estimated drain rate is 700W. I currently have 89% in my battery but the icon is red and empty. If there is an application I should install, or a setting I should change, please let me know. Thanks!

  Read the article

• Sony VAIO wireless card not connecting intel 4965AGN

  - by marcski55

  I'm running a Sony VAIO VGN-CR410E, and recently moved it to Ubuntu from Windows 7. Both my home and work networks (which I maintain) run WPA/WPA2-PSK authentication for security. My wireless network card (intel 4965AGN) will not connect to them unless I am in the same room (kind of defeats the purpose of wireless). The PC is 4 years old and the routers are brand new (last month or so). Had no problems with it with Win7, but Ubuntu just doesn't like the networks. As an IT manager, my laptop needs to work, so any help is appreciated. If this is a duplicate, please let me know of what. I've spent hours searching and nothing has worked. Thanks for your help. (This is my first experience fully relying on Ubuntu). I can see the networks and attempt connection, but it fails authentication. Let me know of any code you need.

  Read the article

• How do I get wireless and video working on a Sony Vaio vpc-z21x9r

  - by Alex

  OS: Ubuntu 11.10 Kernel: 2.6.37.6 Laptop: sony vaio vpc-z21x9r The problem: I can't change level of screen backlight; also can't enable wi-fi. While using 3.0 kernel everything is ok, but the laptop discharges too quickly. Results for lspci 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 5f) VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) there is no wlan0 in ifconfig -a too. I've fount that kernel should already have drivers for this graphics controller, but when i load up in restore mode, it writes "fall" while trying to load up some video drivers. To change the level of backlight i've alrady tried: xbacklight -set XX , smartdimmer -s XX and got this init_ nvclock() failed! also sudo setpci -s 00:02.0 F4.B=XX with no results. As for wi-fi, i've found driver but i don't understand how to install it. Here it is How can I fix these problems? Thank you for your help and time! Also tried to fix problems with backlight writing GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset acpi_backlight=vendor Still no results. Is there any sense in recompiling kernel, I mean 2.6.37.6. Can it make any improvements in the situation?

  Read the article

• Operating System not Found after installing Ubuntu in a Sony Vaio

  - by diego8arock

  I just bought a Sony Vaio SVS15115FLB that came with Windows 7, after enjoying the PC graphic power for a little, I decided it was time to install Ubuntu 12.04. First, I inserted a USB stick, reboot, press F11 but a message saying that no OS was found on the USB, so then I used a live CD. It booted fine and I installed Ubuntu, then when it was time to restart the PC, it didn't boot to GRUB but it went straight to Windows and it began an startup error and was looking for a solution, after it was done, it restarted and then it booted again to Windows and to the same start up error solution thing. I freaked out, so I booted again the Ubuntu live CD, and installed Ubuntu over everything, after it installed I rebooted and then a message appeared saying Operating system Not Found, and I have no idea why. So I Googled again and found this post on Boot Partition, I did everything exactly on that post, but it didn't work (by the way, this was the message): The boot files of [Ubuntu 12.04 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. It appeared the first time, then I did it all again and then it was gone. I rebooted and nothing, the same Operating System not found message appeared. So I decided to create a partition for Windows, hoping for something, but the message still appears. I really have no idea what to do, but there is something odd, if I insert the USB stick containing Ubuntu 11.10, the message that says that there is no OS in the PendDrive flashes for a fraction of a second and the boot straight to Ubuntu 12.04 without problems (and booted to Windows when I installed it, ignoring Ubuntu), right now I'm using it like that, but its pretty annoying. Can anyone advise me how to fix this? I'm no expert on this kind of things (boot, GRUB, recovery and stuff like that).

  Read the article

• grubx64.efi cannot find grub config or grub files, boots to grub console

  - by endor43

  Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI The answer to this question was immensely helpful to me and my new Vaio Z3. The issue that I am having now is that after replacing bootmgfw.efi with grubx64.efi and renaming, it boots directly to grub console. I dont even get a menu where i can chose ubuntu. I tried putting a grub.cfg file next to the new bootmgfw.efi(grubx64.efi), no go? Any ideas how i can get the renamed grubx64.efi to find all the rest of the grub stuff outside of the ESP in my linux parition? Or do i have to move all grub files to /EFI/Microsoft/Boot on ESP? Thank you!

  Read the article

• Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI

  - by Rohan Dhruva

  I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

  Read the article

• Sony VAIO is booting directly into Windows without showing grub

  - by Rohan Dhruva

  I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

  Read the article

• How to boot with Intel GMA500 Poulsbo graphics

  - by Seyed Mohammad

  I have a Sony VAIO netbook with Intel GMA-500 Poulsbo Graphics and I'm trying to boot the latest Ubuntu-12.04 Beta-2 using a bootable USB. According to this Ubuntu-Wiki, support for Intel GMA-500 Poulsbo graphics is promising in Precise-Beta2 and should work out of the box. Of course the wiki talks about a problem when booting from USB and states that restarting X using: sudo service lightdm restart will bring a functional graphical desktop, but nothing happens for me! Any help is highly appreciated.

  Read the article

• Problem booting 12.04-Beta2 with Intel GMA500 Poulsbo graphics

  - by Seyed Mohammad

  I have a Sony VAIO netbook with Intel GMA-500 Poulsbo Graphics and I'm trying to boot the latest Ubuntu-12.04 Beta-2 using a bootable USB. According to this Ubuntu-Wiki, support for Intel GMA-500 Poulsbo graphics is promising in Precise-Beta2 and should work out of the box. Of course the wiki talks about a problem when booting from USB and states that restarting X using: sudo service lightdm restart will bring a functional graphical desktop, but nothing happens for me! Any help is highly appreciated.

  Read the article

• How can light sensor be enabled for control brightness and keyboard back-light automatically?

  - by Eng.amr19

  I have A Sony VAIO laptop F-series () Nvidia and it has light sensor. When I was using Windows, this light sensor controlled the brightness and the keyboard backlight automatically due to the surroundings state. But when using Ubuntu 12.04, it only controls the backlight without automatically adjusting the brightness. How can I enable light sensor to automatically adjustment the LCD brightness without losing the keyboard backlight adjustment due to surrounding state?

  Read the article

• Brightness doesn't change on Sony laptop

  - by Eng.amr19

  I installed ubuntu 12.04 on my laptop for first time and every thing work well but the only thing doesn't work is the brightness doesn't change when i press F5 and F6 with Fn So i can't adjust the Brightness and sometimes i need to decrease it for more time working on battery and the bubble appear that it changed but nothing happen my laptop is Sony VAIO series F with NVIDIA GEFORCE ... and NVADIA accelerated graphic driver is activated

  Read the article

• I can't modify the screen brightness on Xubuntu 13.10

  - by linuxer

  I got this problem with brightness on my fresh xubuntu 13.10 install.. It ain't inc/decrease the screen brightness when pressing Fn+F5/F6 !! I've tried some solutions like setting these values in the /etc/default/grub file and sudo updating grub (this worked for me on my previous xubuntu 13.04 install) GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor" GRUB_CMDLINE_LINUX="acpi_osi=Linux acpi_backlight=vendor" But still not working though :/ I got a Sony VAIO VPCEJ3B1E running xubuntu 13.10 x64bit and an NVidia GeForce 410M and using the propritory drivers 319 Thanks in advace!

  Read the article

• Geforce(410m with CUDA) screen resolution on Ubuntu 12.04 issue

  - by Marco K

  I made a succesful installation of Ubuntu 12.04 64-bit on my Sony Vaio PCG-71811M. I have a Geforce 410M with CUDA,it seems works fine and i have already installed packages nvidia-current and nvidia-settings at version 302.17 (I think it's the latest in this moment), but my maximum screen resolution is 1366x768(and in the native display settings it's the same thing). How can I switch it to an highest resolution, like 1920x1080?

  Read the article

• Unable to access other Volume in Vaio E series

  - by Rahul Ravi Kumar Shah

  Error mounting /dev/sda6 at /media/ravi/New Volume: mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sda6" "/media/ravi/New Volume" Exited with: non-zero exit status 14: The disk contains an unclean file system (0, 0). Metadata kept in Windows cache, refused to mount. Failed to mount '/dev/sda6': Operation not permitted The NTFS partition is in an unsafe state. Please resume and shutdown Windows fully (no hibernation or fast restarting), or mount the volume read-only with the 'ro' mount option.

  Read the article

• Ubuntu 10.10 netbook Screen Resolution Sony Vaio FS315

  - by Fatos

  Hello, I've just installed ubuntu 10.10 on my laptop its all great but the screen resolution is a bit crap i have it set 1200:800 and when i do xrandr it indicates that the i can have a bigger screen resolution but i dont seem to to be able to increase it more 1200:800 through monitor tool. another interesting thing is that xorg.conf does not exist on the /etc/X11/ is there a way to increase the screen resolution for Sony laptops? The graphics card is Intel Graphics Please help! I didnt think it would be so hard to change the screen resolution

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >