Search Results

Search found 1543 results on 62 pages for 'motherboard'.

Page 30/62 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• Can't install Ubuntu on a Z68xP-UD3p board

  - by Carl

  I have tried to install Ubuntu version 10, 11 and 12 64 bit on my Gigabyte Z68XP-UD3P motherboard using live CD and placing the DVD in the drive and starting the machine. When I go to install Ubuntu I get a dark screen and no text at all. When I go with Live CD I reboot and then I go right into the install from the boot menu and still get darkness. Nothing appears. I have a i7 intel CPU with Nvida Gefore GTX 560 Ti video board.

  Read the article

• SPDIF Input not working

  - by BiggJJ

  One of my motherboard has two SPDIF sockets. One input and one output. Under windows these work fine and I am able to achieve what I'm trying here. I want to set Ubuntu up so it will play the Digital input out the Analogue output(normal headphone jack). Under my input devices there is no digital options, and under configuration there is no option for Digital Stereo input I only have options for Digital output and Analogue input, when really I want it the other way around. Can anyone shed any light? error when starting gnome-alsamixer:

  Read the article

• Sound muted in milliseconds after unmute

  - by Yash Gupta

  I installed Ubuntu 11.10 recently, and sound doesn't work properly. Whenever I try to play a sound (from any software), the sound is muted, and when I unmute it, it stats there for a fraction of second and mutes itself. After trying various things, I plugged in a headphone in the front microphone jack of my computer, and magecally, the sound started to come out from my speakers (Which are connected to the line-out in the rear panel). I have analog stereo speakers. The sound card (intel HDA as shown in alsamixer) is detected properly. I have ecs G41T-M7 motherboard and nVidia GT240 (with graphics drivers installed)

  Read the article

• Internet problems

  - by user288636

  I have a strange problem. When I copy/paste via ethernet everything is working fine. But when I go to youtube or downloading some files via internet, connection is freezing very often. Just stop downloading and after few minutes continue and than again stop and etc... Could it be hardware problem with network card or motherboard (network is integrated on board)? I am using Ubuntu 14.04 but it happens on live cd distribution of Mint. There is no restrictions cose when I using on same switch my other laptop with linux installed everything working fine.

  Read the article

• Recycle Old Hardware into a Showcase Table

  - by Jason Fitzpatrick

  If you have a plethora of old hardware laying around, especially motherboard and expansion cards, this obsolete-hardware-to-table hack is just the ticket for your office or geek cave. The table’s design is simple. They took a regular coffee table, affixed old mother boards to it and then, over the motherboards and elevated by acrylic standoffs, they put a heavy sheet of acrylic to serve as the table top. You could replicate the design with any sort of old hardware that is interesting to look at: memory modules your company is sending off to be recycled, old digital cameras, mechanisms from peripherals headed for the scrap heap, etc. Hit up the link below to see more photos of the table. Circuit Table [Chris Harrison] How to Make and Install an Electric Outlet in a Cabinet or DeskHow To Recover After Your Email Password Is CompromisedHow to Clean Your Filthy Keyboard in the Dishwasher (Without Ruining it)

  Read the article

• I can't get Ubuntu installation to start

  - by tyler

  I have a computer with the following configuration: AZUS Sabertooth Motherboard Intel I5 2500 CPU Windows 7 installed I'm trying to install linux. I first attempted to install pin guy. I burned the ISO, booted from it, got the initial menu; attempting to either run the live version from DVD, or install to system. However the process stops at a blank screen with the blinking cursor in left corner. So I downloaded Ubuntu and got the same results. Then I tried wubi and ended up in the same position. EDIT: UEFI might be part of the problem? Based on the link below I have determined that the process will be too time consuming and or risky so I'm giving up. https://help.ubuntu.com/community/UEFIBooting

  Read the article

• What You Said: Your Tech Spring Cleaning Routines

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your tech spring cleaning routine; now we’re back to highlight your tips, tricks, and techniques. What tools rule the spring cleaning roost? Compressed air and microfiber cloths are the tools of choice by a wide margin. D^Angelo highlights the software and physicals tools he uses: Backup all the important stuff just to be safe (c:/, my documents, desktop, drivers) Cleaning the dust with some office depot compressed air, avoiding spinning the fans. Use a brush for that small places (fans, memory, capacitors, etc). Use some dielectric spray on the motherboard. If the pc turned on without problems its time to use ccleaner, Check if there is a toolbar installed or another unusual software that I don’t want. Run my antivirus software or malwarebytes; some defraggler maybe. Make Your Own Windows 8 Start Button with Zero Memory Usage Reader Request: How To Repair Blurry Photos HTG Explains: What Can You Find in an Email Header?

  Read the article

• Mouse and Keyboard Freeze

  - by kev

  I installed Ubuntu 10.10 today and have had mouse problem since. Symptoms: At some arbitrary point in time (frequency: 2-3 times per hour), the mouse and keyboard stops working for ever(may be). I start System monitor, I found out network was shutdown just before mouse freeze. Some time my keyboard keep typing one key. For example:77777777777777777777777777777777777777777777777777777.....(it keep typing for 20 sec) I found out a script just solve the freeze problem:(I hit Powerbutton) -----------------/etc/acpi/powerbtn.sh------------------------ event=button[ /]power action=/usr/sbin/fix_mouse.sh -----------------/usr/sbin/fix_mouse.sh------------------------ rmmod psmouse modprobe psmouse Yesterday I install Ubuntu 10.04 FAILED also have mouse problem. When I switch back to Windows XP. The network card is down. It kept connecting and disconnecting 1 time per sec. CPU: i5 Motherboard: ASUS P7P55D OS: Windows XP + Ubuntu 10.10 Video Card: ATI 5770 Mouse,Keyboard: PS/2

  Read the article

• Hard drive and DVD drive are not being detected by the BIOS

  - by Shah Nsd

  My hard drive and DVD drive are not being detected by the BIOS when I go in to the boot option menu by pressing F12. When I put the hard drive in a different computer it's being detected. I am assuming it's either the mother board or the BIOS. Since the HDD is not being detected I have installed Ubuntu on a flash drive, but even that has become so slow, that it takes around 5 minutes for it to boot. I want to flash the BIOS before I think of changing the motherboard. I have downloaded the updated file and it has a flash.bat and a afudos.exe. I have to run the .bat file. I downloaded the Dos in a box and went to the DOS directory where the .bat file is and tried to run it, but it gives me the error message "This program cannot run under this operating system" Any help would be appreciated

  Read the article

• How can I switch memory modules to 1600 Mhz?

  - by Salvador

  Some months ago I bought 4 Memory modules of 4GB DDR3 1600 KINGSTON HYPERX. The official Kingston manual says: *This module has been tested to run at DDR3-1600 at a low latency timing of 9-9-9-27 at 1.65V.The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9. I cannot find which is the real speed of my memory modules. I normally get from several tools that the real speed is 1333 Mhz srs@ubuntu:~$ sudo dmidecode -t memory # dmidecode 2.9 SMBIOS 2.6 present. Handle 0x005D, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 32 GB Error Information Handle: 0x005F Number Of Devices: 4 Handle 0x005C, DMI type 17, 28 bytes Memory Device Array Handle: 0x005D Error Information Handle: 0x0060 Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: ChannelA-DIMM0 Bank Locator: BANK 0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz (0.8 ns) Manufacturer: Kingston Serial Number: 07288F23 Asset Tag: 9876543210 Part Number: 9905403-439.A00LF How can I switch memory modules to 1600 Mhz?

  Read the article

• Nvidia problems. I think.

  - by Nate D.

  Let me start off by saying, I've been trying to run Ubuntu on my custom PC for about 2 years. From 10.04 to 12.04, this problem persists. When I try to boot Ubuntu from either a USB stick or a CD, I see the normal Ubuntu splash screen. It looks like it's working, orange dots are moving, but then the screen glitches and freezes. I'm assuming this happens because there are no drivers for my graphics card (Nvidia GeForce 8800, I think). My motherboard has no onboard graphics, nor does it have a VGA out. So, how can I get this working on my system? Can I somehow put the drivers along side the .img on the USB stick? I can boot from my Ubuntu USB stick on my MacBook. In case that helps anyone...

  Read the article

• Ubunti 12.10 wake on lan not working with Realtek 8139

  - by f.cipriani

  My pc doesn't wake up when receiving a magic packet from a pc connected to the same router. ethtool: fcipriani@ubuntu:~$ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes I have enabled all the wake up features in my bios, and I have verified the magic packet gets to the pc. I suspect the main problem is that the NIC light is completely turned off after the shutdown, but even after spending a lot of time researching I can't understand if this is a limit of my network card, my mobo, or something in the OS which needs to be configured correctly in order to leave the NIC in stand by mode with the light flashing. the NIC is Realtek 8139, the motherboard Asus P5L13L-X

  Read the article

• Suitable Ubuntu distribution

  - by Dr AMD

  I need help choosing a suitable distrbution for my PC. I am using an HP d530 CMT with: ?• CPU Type: Intel Pentium 4, 3000 MHz (15 x 200) ?• Motherboard Chipset: Intel Springdale-G i865G ?• System Memory: 1015 MB (PC3200 DDR SDRAM) ?• Video Adapter: Intel(R) 82865G Graphics Controller (96 MB) ?• 3D Accelerator: Intel Extreme Graphics 2 ?• Audio Adapter: Analog Devices AD1981B(L) @ Intel 82801EB ICH5 - AC'97 Audio Controller ?• Network Adapter: Broadcom NetXtreme Gigabit Ethernet I have tried to install Ubuntu 13.10 and 12.04 LTS. Everything is OK on Ubuntu 12.04 except, that the video card was not recognized and the media player, YouTube,etc. did not work properly.

  Read the article

• I can't get ubunutu installation to start

  - by tyler

  AZUS Sabertooth Motherboard, Intel I5 2500 CPU, Windows 7 installed I'm trying to install linux. I first attempted to install pin guy. I burned the ISO; booted from it; got the initial menu; attempting either run the live version from DVD, or install to system; the process stops at a blank screen with the blinking cursor in left corner. So I downloaded Ubuntu and got the same results. Then tried wubi, and ended up in the same position; blinking cursor in left corner.

  Read the article

• How to design application for scaling the application?

  - by Muhammad

  I have one application which handles hardware events connected on the same computer's PCIe slots. The maximum number of PCIe slots on motherboard are two. I have utilized both slots. Now for scaling the application I need either more PCIe slots in same computer or I use another computer. So consider I am using another computer with same application and hardware connected on the PCIe Slots. Now my problem is that I want to design application over it which can access both computers hardware devices and does the process on it. The processed data should be send back to the respective PC's hardware. Please refer the attached diagram for expansion.

  Read the article

• JavaOne - Java SE Embedded Booth - Digi - Home Health Hub (HHH)

  - by David Clack

  Hi All,  So another exciting platform we will have in the booth at JavaOne is the Digi  Home Health Hub (HHH) platform. http://www.digi.com/products/wireless-wired-embedded-solutions/single-board-computers/idigi-telehealth-application-kit#overview This is a Freescale reference design that has been built by Digi, the system is powered by a Freescale i.MX28 ARM SOC, what's really exciting me is it has every wireless protocol you could ever want on a single motherboard. Ethernet, 802.11b/g/n Wi-Fi, Bluetooth, ZigBee, configurable Sub-GHz radio, NFC plus USB, audio and LCD/touch screen option. I've been experimenting with lots of wireless capable healthcare products in the last few months, plus some Bluetooth Pulse / Oxy meters, we have been looking at how the actual healthcare wireless protocols work. Steve Popovich - Vice President, Digi Internationalwill be doing a talk at the Java Embedded @ JavaOne conference in the Hotel Nikko, right next door to the JavaOne show in the Hilton. If you are registered at JavaOne you can come over to the Java Embedded @ JavaOne for $100 Come see us in booth 5605 See you there Dave

  Read the article

• Installing Ubuntu on a Windows CE 6.0 EzBook PC (ez-72a)

  - by nmacholl

  I recently inherited a cheap EzBook PC and decided it might be fun to throw Ubuntu on it. I have a USB all setup but for the life of me can't get it to boot from USB! I've looked online and can't seem to find the motherboard details anywhere to access the BIOS and more applications won't work on Windows CE so I'm stuck. Is there an obscure Windows CE installer out there? It's really frustrating when I can't get to the BIOS - and I don't have a manual. If anyone knows anything I'd appreciate it!

  Read the article

• Windows 8 fresh install and 12.10 dual boot

  - by Sir Linuxalot

  I have a question concerning Windows 8 and dual booting with Ubuntu 12.10. I've researched answers here, but haven't seen a question that resembles mine exactly: Ubuntu install and dual Boot with Windows 8 UEFI UEFI hardware and dual booting with windows Ubuntu 12.10 wont boot Specifically, I'm pondering installing a fresh install of Windows 8 (for game purposes), and a fresh install of 12.10 and dual booting them. I'm not sure if UEFI is hardware specific or software specific, and I'm worried if I try to implement the dual boot I'm going to run into UEFI issues and have to go through the grief of getting things up and running by following a long and tedious procedure. Can I, starting with Windows 8, then install 12.10 without too much hassle? My current hardware config is: Microstar Motherboard 7514 with an Intel Core 2 Duo processor. The drive I'm thinking of using is a Western Digital TB drive, new out of the box. As always, any help would be appreciated. Thanks.

  Read the article

• Blank Screen After Ubuntu 12 installation

  - by Atul

  On my dell laptop, running with windows 7, I installed Ubuntu 12. I used it for sometime, then i re-started to switch to windows. First time it got boot up with windows but then it got hanged. I re-started again and then blank screen with blinking cursor came and beep sounds also started to came. I read in few forums and this seems like a common issue with Ubuntu. I tried using the bootable USB for both windows 7 and Ubuntu but none of these are even getting detected. Please let me know if any of know the work-around. Below is configuration" Machine: Dell Studio BIOS: Phoenix OS: Windows 7 Motherboard: Intel

  Read the article

• Wrong audio volume at boot

  - by skerit

  When I boot my computer and login the volume level is always way too loud. Unfortunately the only way to change it is a physical knob on my speaker. As soon as I can change the volume using my keyboard the volume immediately drops. Say the volume is at 100%, as soon as I turn the dial on my keyboard a little bit it drops to a normal level like 40% How do I get this to work in a clear way, like having it remember the audio level it was on at shutdown? Here's my audio card model: 82801JI (ICH10 Family) HD Audio Controller An Intel card on a Asus motherboard

  Read the article

• I need acpi=off to boot, but this seems to disable wifi

  - by TheExp3rt

  To boot my computer, I have to use acpi=off in kernel options. Doing this apparently causes my wifi adapter to be switched off and prevents my mouse and USB keyboard to not work. If I change acpi=off to nomodeset, it fixes these problems. But then it sets my computer at a lower resolution. I am currently running Kubuntu 13.10, although none of the updates, starting from 12.04, changed the need for acpi=off. I assume I need acpi=off in because I have an oldish computer with an intel motherboard How can I boot without acpi=off? Output of uname -a: 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• Unable to Install GRUB in /dev/sda on raid drives

  - by Henry

  I'm trying to install 12.04LTS on a server but keep running into the unable to install grub error like so "Unable to Install GRUB in /dev/sda". The drives are in raid1 and I'm using fakeraid on a supermicro motherboard, which according to the manual is fully supported. I've tried installing both from USB and CD-R but still no luck. I'm not dual booting with any other OS, just using 2x320gb drives and have been choosing to install using the entire disk. Any ideas what I'm doing wrong or can do to fix this? Thanks

  Read the article

• Installed Ubuntu In a low Specs PC and it is too slow, even with LXDE

  - by Herudae

  I'm new with Linux and started with Ubuntu 11.10, I installed it in my PC (Core2Duo 2Ghz, 512Mb Ram DDR2, integrated video in Motherboard), I know the requirements for Unity are 1Gb Ram so I decided to download a Desktop environment more lightweight, so I Installed LXDE, it loads very fast, compared to the 3.5 min from login screen to open desktop in Unity, but it freezes every time I open a single program, I can't even navigate in Internet, it freezes, sometimes for a pair of minutes and the graph at bottom right is all green as if iyt were using 100% CPU, it happens with every program. As additional data it takes 3+ min to get from boot system selection screen to Login screen and 3.5 Min more to get into Ubuntu with Unity, with LXDE it turns to 30 secs aproximately. Is Ubuntu + LXDE Desktop Environment Package = Lubuntu? or should I download Lubuntu directly instead? I installed some other desktop environments, as Gnome but it doesn't log in, the screen just turns grey. Should I get an older Ubuntu version? I'm thinking about uninstalling Ubuntu but I'll try to deplete the options, thanks for your support.

  Read the article

• Kernel panic: "Machine check: processor context corrupt" after install

  - by Red

  I am new to Linux and I am having issues installing. I have tried multiple versions and all seem to give me the same issue. The LiveCD worked and I used it to install Ubuntu alongside Windows 7. Here's a few screen shots of what I get. I am currently trying to install most the most recent version of Ubuntu. System specs: x58 motherboard 12GB RAM Core i7 processor 2 Nvidia GTX 580 video cards in SLI configuration Thanks in advance and please feel free to simplify your answers as I am pretty new at this.

  Read the article

• front usb wont mount harddrives, internal usb ports do

  - by Thesgsuser

  I have noticed something in my new build, i am using Ubuntu desktop newest version my motherboard is the asus f1a75-m pro R2.0 with the usb ports in the back all my NTFS hard disks or usb sticks work fine, but then.. when i put them in the front usb ports of my chassis (silverstone milo ml-03) they wont mount... I have 2 usb 3.0 ports in front of the case connected with a internal usb 3.0 header. But i verified that the usb 3.0 ports on the back do mount the harddisk so it has nothing to do with usb 3.0 i think. The strange thing is, my mouse works fine on the front usb ports. Every usb hardware piece seems to work except if it has any memory inside it :( What seems to be the problem?

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >