Search Results

Search found 10033 results on 402 pages for 'execution speed'.

Page 300/402 | < Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >

• Multiple IP's using one NIC connectivity problem - Windows

  - by Vincent

  I have a frame relay network that is directly connected to a GPRS network. I also have a ADSL high speed network and recently I have been trying to achieve the following network configuration using windows 7 (Also tried XP) with no success to date. On one server I have two NIC's NIC1 I would like the following two static IP address's 10.0.1.110 and 10.0.1.200 the cisco router has a default gateway of 10.0.1.1 the ADSL is DHCP. NIC1 and the cisco router do not have access to the internet. NIC2 is setup for DHCP with a primary DNS and secondary DNS configured to enable internet connectivity. With NIC1 all incoming TCP connections are from IP address's starting with 10.192.x.x I cannot establish a TCP connection to both 10.0.1.110 and 10.0.1.200. Its either one or the other. I have a static route implemented in windows of: route -p 10.192.0.0 mask 255.255.0.0 10.0.1.1 metric 1 I have tried leaving out the gateway in the NIC1 and many other combinations with no success. Can anyone please help? What am I doing wrong?

  Read the article

• Ubuntu 12.04 - HP ProLiant DL380 G4 - Load Maxes Out / Unresponsive

  - by Brian S

  Trying to post this question on here. I've posted it on the Ubuntu forums as well with no replies. Recently I upgraded an HP ProLiant DL380 G4 server from Ubuntu 10.04 server to Ubuntu 12.04 server. Upon doing so, the server will not - at random times - get to a load of 400+ and then become completely non-responsive. I use an SNMP graphing program (cacti) and the load steadily increases by about 10 every five minutes until it gets over 400 and the graphing stops. The graphs may not be accurate, but the CPU load averages about 3% before this happens - and right when the load starts increasing, it jumps to about 25% for 15 minutes and dramatically dips down to less than 1% (about 0.3%) until the graphing stops. I'm not able to open a SSH tunnel to the server to do anything. I've checked the /var/log/syslog and all logging stops at that time as well - with nothing else in there. The odd thing is - the server still responds to DNS queries for the zones it is authoritative on during this time - and at normal speed. Just not sure what the next step would be in order to find out what is going on - and how this issue can be corrected. The server cannot stay with Ubuntu 10.04 Server and needs to stay upgraded.

  Read the article

• Is StoreJet Transcend (0x2329) an Advanced Format drive?

  - by Graham Perrin

  I use a 640 GB StoreJet Transcend (0x2329) with ZEVO Community Edition 1.1.1 on OS X 10.8.2. Question Is this drive Advanced Format? Background I submitted a request for technical support to Transcend but the first response was gibberish so I don't expect a reasonable follow-up. Models at http://www.transcend-info.com/Products/CatList.asp?LangNo=0&ModNo=293 are similar but different sizes (not 640 GB). Mine is probably 25M2 (TS640GSJ25M2): Unless I'm missing something, nothing currently in the Transcend support area tells me whether the drive is Advanced Format. From System Information in OS X 10.8.2: StoreJet Transcend: Capacity: 640.14 GB (640,135,028,736 bytes) Removable Media: Yes Detachable Drive: Yes BSD Name: disk3 Product ID: 0x2329 Vendor ID: 0x152d (JMicron Technology Corp.) Version: 0.00 Serial Number: 322549FBA004 Speed: Up to 480 Mb/sec Manufacturer: JMicron History for the ZFS pool shows creation in March 2012 –  macbookpro08-centrim:~ gjp22$ zpool history zhandy | grep create 2012-03-14.17:29:37 zpool create -f -O compression=off -O copies=1 -O casesensitivity=insensitive -O snapdir=visible zhandy /dev/dsk/GPTE_1928482A-7FE4-482D-B692-3EC6B03159BA 2012-06-22.15:51:16 zfs create zhandy/Pocket Time Machine At that time I almost certainly used ZEVO Setup Assistant to create the pool. macbookpro08-centrim:~ gjp22$ zpool get ashift zhandy NAME PROPERTY VALUE SOURCE zhandy ashift 0 default If I discover that the drive is Advanced Format, a different ashift value will be appropriate.

  Read the article

• ios7 loops on the "trust this computer" dialog

  - by gcb

  trying to transfer files to the work ipad via my debian7 box. When i plug it on the computer usb port, it shows the dialog about trusting this computer, and the computer shows a gnome alert about the ipad being locked and that i should unlock it and try again. i press "trust" on the ipad and try again on gnome. and it starts again. over and over. endlessly. there are dozen threads about this on apple support forums. no solution. just dozens of "me too" flags. e.g. https://discussions.apple.com/message/23082859#23082859 (44 me-too, 2k views) here is the log/messages i get Oct 23 21:17:39 dotmatrix kernel: [ 1928.517766] usb 2-1.7: USB disconnect, device number 16 Oct 23 21:17:39 dotmatrix kernel: [ 1928.715441] usb 2-1.7: new high-speed USB device number 17 using ehci_hcd Oct 23 21:17:40 dotmatrix kernel: [ 1928.811031] usb 2-1.7: New USB device found, idVendor=05ac, idProduct=12ab Oct 23 21:17:40 dotmatrix kernel: [ 1928.811036] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 23 21:17:40 dotmatrix kernel: [ 1928.811039] usb 2-1.7: Product: iPad Oct 23 21:17:40 dotmatrix kernel: [ 1928.811041] usb 2-1.7: Manufacturer: Apple Inc. Oct 23 21:17:40 dotmatrix kernel: [ 1928.811043] usb 2-1.7: SerialNumber: fec5e0f6a6fa18a936de3c53af661051d290275e Oct 23 21:17:40 dotmatrix mtp-probe: checking bus 2, device 17: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7" Oct 23 21:17:40 dotmatrix mtp-probe: bus: 2, device: 17 was not an MTP device Oct 23 21:17:43 dotmatrix kernel: [ 1932.346505] usb 2-1.7: USB disconnect, device number 17 If i never press the trust dialog it will stay there until i remove the cable. but the logs shows that it gave up 3sec after the cable was connected.

  Read the article

• Serving and caching content from Amazon S3 with Tomcat

  - by Rob

  Hi all, We're looking to serve a range of content using Amazon S3 as a store for the content and Tomcat to host the web application. The content is divided into free and paid for content. We intend to authenticate the users when they access the web application running in Tomcat. Based around their authentication we are able to tell if the user has access to paid for content or simply free stuff. So I envision the flow of a request being something like this: Authenticated request to Tomcat If user is "paid" user, display links to premium content Direct requests for paid content back through Tomcat to prevent direct access to it by non-paying users. Tomcat makes request to S3 through a web cache to keep our costs down Content is returned to user. As we have to pay for each request to S3, I'd ideally like to cache content locally to the Tomcat instance after it has been requested for the first time to keep costs to a minimum and to speed things up. I would also like to be able to invalidate this cache if we publish fresh content to S3. So to confirm my proposal: Client Request - Tomcat - Web Cache - S3 To invalidate the cache, I was thinking of using something like PubSubHubbub with the cache waiting for updates to the feed for content that it should invalidate. I'd appreciate some general feedback on this approach as I've no real experience of caching and I'm sure I've made some invalid assumptions. I'd also appreciate any recommendations for caching technologies. Thanks.

  Read the article

• USB 3.0 hard disk not detected on a particular host controller?

  - by Alvin Wong

  I have a USB 3.0 hard disk which has always been working on my desktop with an XHCI. Now I just bought a notebook with an XHCI (something with Intel's Ivy Bridge setup). The first time I plug the hard disk in its 3.0 port it is detected and working. A few hours later I try to connect it again, but seems that the notebook just ignored it! The light on the hard disk didn't blink as usual (instead it is hold at on). I then tested it with my desktop again and it is working perfectly. It gets trickier when I plug it in the USB 2.0 port of that notebook it is detected and working perfectly (despite the slower speed). Then I try to plug in an USB 2.0 USB flash drive to that USB 3.0 port, and it is detected (of course as USB 2.0). So, there are two USB 3.0 ports on my notebook's XHCI. Both of them are not working with my hard disk but working perfectly fine with my USB 2.0 UFD. What's wrong with it? When I plug in the hard disk, device manager doesn't change. I've tried re-installing the driver for the XHCI, but it changes nothing. Had I broke the USB 3.0-specific pins of both USB 3.0 ports?

  Read the article

• What is the quickest reliable way to backup a NAS drive to a USB drive?

  - by Tim Murphy

  How would you backup 600+ GB of data on a NAS (Network-Attached Storage) drive to a USB external drive? The NAS drive does not contain mission critical data nonetheless I wish to make weekly copies of it just in case. The NAS drive is almost exclusively used as an archive dump and is rarely updated. However the backup strategy used must have a simple restore procedure so I can confidently say the data now on the NAS drive is exactly how it was at the time of backup. I did try xcopy but seemed like it would take many-many hours and eventually crashed with insufficient memory. http://www.ctunion.com/node/114 suggests I would need to use xxcopy instead due to folder/file name lengths. My concern with xcopy/xxcopy is the length of time it takes. Hoping something else is faster. NAS drive is DLink DNS-313. 1TB drive installed. Connected to router via Ethernet cable. USB drive is Seagate 1TB. Can be connected to Windows Vista (preferred) or Windows 7 PCs. Both PCs are usually connected Wirelessly however ethernet cable can be used during backup to speed up the process.

  Read the article

• hard drive recognized by bios but not by windows

  - by tehgeekmeister

  I'm adding a new hard drive (A seagate ST31000340NS; I had links in here but I don't have enough reputation to post them. Interestingly, the bios recognizes it as a ST31000340AS, but it was bought as the other number...) to a friend's hp pavilion d4650e (mobo specs; google the model if you want the rest of the info, can't do more than one link.). Have had a hell of a time with it. Finally figured out that the hard drive needed a jumper set to limit the speed to 1.5gbps so the mobo would recognize it, and the bios DOES recognize it now. But not windows (using windows 7), using add new hardware or diskmgmt.msc. According to my friend, who was at the computer when it first booted after adding the jumper, a new hardware found dealio popped up saying something about raid, but I can't provide more info then that since I didn't see it. Ubuntu livecd recognized the drive before we changed the jumper. Haven't checked since then. XP didn't recognize it, that's the OS we started with. Upgraded to 7 hoping it might fix the problem. The only other info I can think of that might be immediately relevant is that the drive is plugged into the fifth sata channel, and the first channel is empty. Is this a problem? I assume not, because the two other drives (in a raid 0) and the cd and dvd drives are also on channels past the first one, and are recognized. Ask questions and I'll update with info!

  Read the article

• Wireless to Wireless Transfer Slow on a Linksys WRT54GL

  - by Kyle Brandt

  The Situation: When I try to transfer a file from one computer to another that are both connected via wireless on a WRT54GL (in a office) with dd-wrt firmware I often get bad speeds. In generally they average around 100 kilobytes a second. Either computer can download via wireless from the Internet at at about 2 megabytes a second. The speed is slow with the transfer of one large file. There are about 20 other wireless networks that the computers can see, so there is a lot of noise, but I don't have the equipment to really monitor the frequencies well. But that still seems pretty slow. I thought maybe it was the transmit on each card, but even when they are 5 feet away with a line of sight I still get these speeds. According to Linux both cards are operating at 54g. My Questions: Is this normal for this sort of consumer level wireless equipment? Anything I can do to improve it? why is wireless to wireless transfer slow when everything else isn't? Whats steps might I take to figure out what is happening? For example, are lots of packets not making to the access point requiring retransmissions? Above all, I want to find out what the problem actually is. This may seem odd, but at this point I am more interested in understanding what the problem is than fixing it. What I have tried: I have tried messing with lots of settings. Different channels, xmit power, G-Only, none of which has made anything any better. I've also tried upgrading to newer dd-wrt firmware version and doing a reset to wipe out the settings.

  Read the article

• What is the best VM for developing WPF apps from within OS X?

  - by MarqueIV

  All of my machines are Macs (Mac Pro, MacBook Pro, MacBook Air and Mac Mini (and Apple TV 2.0 too! :) ) but for my day-job, I develop .NET/WPF applications. Normally I just boot into Boot Camp and develop that way, which of course works great, but there are times when I need to simultaneously get to things on my Mac-side of the equation, so I've bought both VMware 3.1 and Parallels 6. Both work, however, even on my Mac Pro where I paid to upgrade to the better video cards (the NVidia 8600s I think vs. the stock ATI cards) the WPF performance bites!! Now this confuses me since both boast that they support not only hardware-accelerated OpenGL 2.1, but also hardware-accelerated DirectX 9 (VMware even allegedly supports DirectX 10!) via their respective virtual drivers and both can run 3D games just fine, even in a window. But even the simple act of resizing a WPF window that has a tiled background results in some HIDEOUS repainting and resizing behaviors. It's damn near closer to what you'd expect over RDP let alone a software-only renderer (forget accelerated hardware completely!) So... can anyone please tell me WTF WPF is doing differently? More importantly, how can I speed up the WPF performance? Should I switch to VirtualBox that also has support for DirectX? Or am I just gonna have to 'byte' the bullet (sorry... had to. So I like puns! Thank Jon Stewart!) and continue using Boot Camp?

  Read the article

• RDP problem with Vista and Windows 7 destination

  - by MadBison

  I use a server a home to host a bunch of concurrently running Hyper-V VM's with different OS's and software for testing. I have Vista on the laptop, all latest SP's and patches. The server is Server 2008 R2, fully patched. The guests are a mix of XP, Vista, Server 2008 and Windows 7. If I connect to the Win XP or Server 2008 guest using RDP, it is always good. Very quick, no speed issues. If I connect to the Vista or Win 7 guests, the response time is so slow it is unusable. Usually 6 or 8 seconds, and at times it is to long to measure! This happens from both the laptop running Vista, and the server running Server 2008 R2. Does anyone know what the issue is with RDP on Vista and Windows 7 destinations? I did read this: http://blog.tmcnet.com/blog/tom-keating/microsoft/remote-desktop-slow-problem-solved.asp and that is not the problem I have applied that change to all PC's.

  Read the article

• Wake OSX 10.8 over WiFi (WoWL - Wake on WiFi Lan)

  - by WrinkledCheese

  I have a stack of Apple Mac minis running SSH servers for remote login. The problem is that I can't seem to get them to wake up. From what I gathered, as of Mac OSX 10.7 you required to have a boot time option set - darkwake=0 10.7 and darkwake=no 10.8. So I tried this and then I came to the realization that this will probably work for a wired connection but I'm using WiFi. My wired connections are used for another local subnet without Internet access, so I have to get it to wake on WiFi. I realize that I can just set the stack of Mac minis to just not sleep, but I'm looking for a sleep enabled option. These services don't require initial response speed as once the connection is made they will be active and once they are no longer active they will hopefully go back to sleep. I have a FreeBSD box running avahi-daemon in order to try and wake the Macs with the Bonjour Service but it doesn't seem to work. I tried registering the service as Gordon suggested in the below post, but that just makes it so that there isn't a timeout when discovering services and resolving them. It still doesn't allow ssh connections to port 22 when it's asleep. For reference, I want what seems like what Gordon Davisson explained on this question: Wake on Demand for Apache server in OS X 10.8

  Read the article

• Network card very slow, only on Windows

  - by J Penguin

  This only happens to 1 of my machine, and only when booting into Windows 7. No matter what network card I put in, Windows would default its mode to 10Mbps full duplex. Transfer speed is approximately 1 MB/s. If I set it to 100Mbps, the transfer drops to 100-200K/s. If I set it to 1000Mbps, the connection is lost completely. I've tried swapping in different cards, both PCI-E and PCI. I'v etried update the windows, I've tried reinstalling the drivers... On this very same machine, if I boot into Fedora, it can use the card at its full capacity 1000Mbps transfering 80+ MB/s And all the cards work just fine when plugging into other machines on the same network. I'm very curious. What could be the reason for this? The only different software that this machine has is virtual box with a VPN emulator, but disabling that VPN doesn't seem to do anything. I would like to get this fixed, hopefully, without reinstalling windows _< Will that be possible?

  Read the article

• Desktop PC does not power up on power button

  - by hIpPy

  When I press the power button on my desktop, it does not power up completely. Before I press the power button, I see lights on the motherboard. Everything is normal. On power button press, the fans on the cpu, graphics card and motherboard start to spin a little for a second or two and then they stop. No beeps during this process. It has been doing this for a while now but it used to start up after some trials. Once it starts up, I have NO issues at all like random shutdowns so it is not an issue with OS. I'm just guessing here but it seems as if the PSU (Antec TP2-550ATX) is dying out and does not have enough power now - just a guess. It's an old desktop assembled in 2005 but I have maintained it well. Any ideas? Please help. Thanks. Below is the complete configuration. DFI LAN-Party UT NF4 Ultra-D 6/23 {6.70}, Evercool EC-VC-RE 41/47C, AMD Opteron 170 2.0GHz {1.3.2.16} 1.312V 36/41C, ThermalRight SI-120, Panaflo 120×38mm OCZ Platinum 2×1GB 200MHz 2.66V 3-3-2-7 1T XFX 7800GTX 256MB 475/1250MHz {91.31}, Zalman VF900 Cu led 41/56C WD Caviar 320GB 7200RPM 16MB SATA 3Gb/s Antec TP2-550ATX Antec P180 WinXP sp2 KB896256 Logitech MX310 Razer Mantis Speed BenQ FP91G+ 19" LCD 8ms DVI Creative Audigy2 ZS {4.42} BenQ DW1640 Logitech z-5300e 5.1 280W Legend: Driver versions: {} User settings: [] Voltage: V Wattage: W Temperature: C (Celsius) min/max

  Read the article

• Jenkins shell command isn't executing

  - by Dmitro

  In Jenkins project I add command for executiong rm /var/www/ru.liveyurist.ru/tmp/* But when I build project I get error: Started by user anonymous Building in workspace /var/www/ru.myproject.ru Updating https://subversion.assembla.com/svn/myproject/trunk At revision 1168 no change for https://subversion.assembla.com/svn/liveexpert/trunk since the previous build [ru.myproject.ru] $ /bin/sh -xe /tmp/hudson7189633355149866134.sh FATAL: command execution failed java.io.IOException: Cannot run program "/bin/sh" (in directory "/var/www/ru.myproject.ru"): java.io.IOException: error=12, Cannot allocate memory at java.lang.ProcessBuilder.start(ProcessBuilder.java:475) at hudson.Proc$LocalProc.<init>(Proc.java:244) at hudson.Proc$LocalProc.<init>(Proc.java:216) at hudson.Launcher$LocalLauncher.launch(Launcher.java:709) at hudson.Launcher$ProcStarter.start(Launcher.java:338) at hudson.Launcher$ProcStarter.join(Launcher.java:345) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:82) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:58) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:703) at hudson.model.Build$RunnerImpl.build(Build.java:178) at hudson.model.Build$RunnerImpl.doRun(Build.java:139) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:473) at hudson.model.Run.run(Run.java:1410) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:238) Caused by: java.io.IOException: java.io.IOException: error=12, Cannot allocate memory at java.lang.UNIXProcess.<init>(UNIXProcess.java:164) at java.lang.ProcessImpl.start(ProcessImpl.java:81) at java.lang.ProcessBuilder.start(ProcessBuilder.java:468) ... 16 more Build step 'Execute shell' marked build as failure Finished: FAILURE I started Jenkins from root user. Please advise what can be reason of this error?

  Read the article

• Can Current Backflow from Powered Hub's Adapter & cause PC Damage?

  - by SuperUserMan

  Getting this short: Can current flow from a powered USB hub's power adapter (lying 10 Meter away) back to computer via usb port and cause damage to Computer components like mobo, etc? What should be my concerns? Using a 2 Amp 5V Power adapter to power a 10m Long Active Repeater USB extension cable with 4 port HUB & plugging into PC's Front port, causes PC Chassis fan to keep running (thought slower than regular speed) Front Chassis HDD & power LED to turn on (though bit dim) may be other things which i cant detect/see at chip level, in motherboard?? All this even after PC is shut down (bit scary) More detail (in case still want to read): To run 4 High power (needing 450 mAmps) Wifi Adapters, far away from PC, Bought Active Repeater USB Extension Cable with 4 Ports & power port at far end http://www.ebay.com/itm/33FT-USB-2-0-Male-to-Female-Extension-Cable-Hub-Splitter-Adapter-with-4-USB-Port-/390846115254 Then added a locally bought 2 Amp 240V AC to 5V DC Power Adapter and plugged into USB hub which is a part of & situated at far end of a 10 Meter Active Repeater usb extension cable. Even 4 Wifi Adapters run fine (appear to) using this setup, but running chassis fan, dimly lighted Power & HDD LED, even when PC is switched off is bit scary and surely mean 5V & some current is flowing all though that 10 meter extension cable into my USB port & powering stuff. Can this cause damage? and what should be my concerns. Of course I can't switch off the power adapter (lying 10 meters away from PC) every time I switch off my PC to prevent this.

  Read the article

• What is causing sudden freezing during running real-time program?

  - by Trevor Boyd Smith

  So I run a high intensive (CPU/GPU) real-time program. During normal execution suddenly everything freezes for 1-4 seconds. I opened "Process Explorer" in the background to help gain insight and maybe identify something. Here is what the CPU/GPU graphs looks like when I align them in time: Notice the 4 distinct drops in both the CPU/GPU. You can see that it goes from some sort of positive CPU/GPU usage to almost zero. These drops in the graph align with when the real-time program suddenly freezes. How do I find what is causing these sudden drops? NOTE: When you put your mouse over the graph it tells you the time, accurate to the second, for where your cursor is. Maybe this mouse over feature could be helpful in some way (e.g. what if you had a log of all processes every 100ms). EDIT: The real-time program is a video game and so I can't watch some sort of instrumentation while the video game is running. I need a solution that let's you look back in time somehow to see what was happening when the slow down occurred. EDIT: RE - Recording Data vs using real-time monitor: So the windows performance recorder is for some reason not recording what I expect it to record. So I switched to using "perfmon" and then opening it's "resource monitor". RE - Setting it up so I can view real-time monitor: In the video game I set it to spectate and then put the video game in "windowed" mode so that I can view the real time display that Resource Monitor has. Now that I can get semi-real time (only once per second... how do you get more than once per second?) I started looking at the various real time data readouts. Getting to the cause: I noticed a strong correlation in high disk IO and low CPU usage (which is also seen by having in-game freezing). How do you use resource monitor to find out who is doing all this offending disk IO?

  Read the article

• pfSense router on a LAN with two gateways

  - by JohnCC

  I have a LAN with an ADSL modem/router on it. We have just gained an alternative high-speed internet connection at our location, and I want to connect the LAN to it, eventually dropping the ADSL. I've chosen to use a small PFSense box to connect the LAN to the new WAN connection. Two servers on the LAN run services accessible to the outside via NAT using the single ADSL WAN IP. We have DNS records which point to this IP. I want to do the same via the new connection, using the WAN IP there. That connection permits multiple IPs, so I have configured pfSense using virtual IP's, 1:1 NAT and appropriate firewall rules. When I change the servers' default gateway settings to the pfSense box, I can access the services via the new WAN IPs without a problem. However, I can no longer access them via the old WAN IP. If I set the servers' default gateway back to the ADSL router, then the opposite is true - I can access the services via the ADSL IP, but not via the new one. In the first case, I believe this is because an incoming SYN packet arrives at the ADSL WAN IP, and is NAT'd and sent to the internal IP of the server. The server responds with a SYN/ACK which it sends via its default gateway, the pfSense box. The pfSense box sees a SYN/ACK that it saw no SYN for and drops the packet. Is there any sensible way around this? I would like the services to be accessible via both IPs for a short period at least, since once I change the DNS it will take a while before everyone picks up the new address.

  Read the article

• Burn .srt subtitles to AVC encoded video (transcoding with hardsubs) [closed]

  - by Saxtus

  Possible Duplicate: How do I hard code a movie with subtitles? I am looking for a software (or combination of software) that will allow me to hard burn subtitles from an .srt file, that has italics and bold typefaces, to an H.264/AVC encoded video so it can played from a desktop player that can't display external subtitles correctly. Ideally it could use Directshow as input as DirectVobSub makes nice job showing the subtitles as they should (allowing me to globally adjust font and size). CUDA use, to speed up encoding, will be great but not necessary. Video source is also H.264/AVC encoded. Audio is AC-3 5.1 and should be retained too but I have no problem re-muxin it later as long as it keeps synced. Until now I've unsuccessfully tested: Avisynth 2.58 Unable to make Direcvobsub to launch through it TextSub() command renders subtitles with fixed font/size and doesn't decode tags Malformed audio TMPGEnc 4.0 XPress 4.7.4.299 Audio downmixed to 2.0 Importing of subtitles doesn't decode tags Badaboom 1.2.1.7 No importing of subtitles at all SUPER © 2010.build.37 "Directshow decode" has similar effect as Avisynth above Other modes doesn't appear to allow any subtitles in Thank you.

  Read the article

• Hyper-v on 2012R2 startup gen1 vm causes the host to freeze up

  - by sputnik

  I've searched a lot to resolve the following issue, but nothing helped me. My problem is, that starting up a first-gen vm locks up the whole host. Only a hard reset helps. Second-gen vm starts and runs perfectly. The freezes happened on 3 different vms. FreeBSD, Ubuntu, Windows Server 2008R2, while Windows 8.1 on second gen config works perfectly. Im using this pc mainly as a workstation. No eventlog errors nor dumps are generated. My system: Windows Server 2012R2 FX-8350, non OC ASRock 870 Extreme R2 (Crappy board imho) 32GB DDR3 1866@1600 (My motherboard, against the "support" for 1866ram won't work with full speed) 120GB SSD 4.5TB Storage space device I dont think that its due to my system, because vmware workstation was running without problems. Did I forget to configure something? Any help is appreciated. P.S: Even deactivating C1E, C6, C&Q didnt work. P.P.S: With no virtual network adapter set, the system still locks up. Creating a first gen vm without any hdds and network and launching works. Attaching a boot dvd causes the host to freeze. The host freezes as the gen1 vm begins to boot, doesn't matter if from dvd or hdd

  Read the article

• Unable to specify parameters to cvlc in a script

  - by VxJasonxV

  I'm creating a script that issues a few curl commands in order to access a time-protected mms stream link, then set up a relay using cvlc (vlc's command line interface) for my own use on an unencumbered player. The curl aspect of this is working, as I can run as a browser and curl side by side and get the same access url. (It's time locked meaning the stream will work forever, but you have to connect quickly or the URL will time out.) The very end of the script prints the command I will run, which is then followed up by "exec $CMD". When I echo $CMD I get: cvlc --sout '#standard{access=http,mux=asf,dst=0.0.0.0:58194}' mms://[...] Manually Copy/Pasting this command in, verbatim, works perfectly fine, but as part of a script, the cvlc execution output says: [0x9743d0] main interface error: no suitable interface module [0x962120] main libvlc error: interface "globalhotkeys,none" initialization failed [0x9743d0] dummy interface: using the dummy interface module... [0xb16e30] stream_out_standard stream out error: no mux specified or found by extension [0xb16ad0] main stream output error: stream chain failed for `standard{mux="",access="",dst="'#standard{access=http,mux=asf,dst=0.0.0.0:58194}'"}' [0xb11cd0] main input error: cannot start stream output instance, aborting [0xb11f70] signals interface error: Caught Interrupt signal, exiting... Why is --sout behaving one way in a script (non-interactive shell?) vs. another way in the foreground (interactive shell) ?

  Read the article

• RDP Connection to Windows 7 stays really slow

  - by Pavlo

  I have an Issue with connecting to Windows 7 via RDP. I can open an RDP Session, but regardless of any settings, the responce times are really long. This in particulary is the case when opening a web page in a browser. I've tried IE, Firefox and Google Chrome. I also use RDP connection to a Windows 2008 Server from the same client machine, and the speed is very normal with all features turned on. We have Gigabit Ethernet here. So I think it can not be the client's fault. What concerns Windows 7 Machine, I've tried shutting all the sraphic features off and turning the color levels to 256 colors. Result - the same. If I work locally on the machine - I can not see any lags. What else have I tried: Using old RDP 5 Client from Microsoft Setting network autotuninglevel as seen here Do You have some ideas? Thanks in advance! Update the problem seems to be with rendering window contents. All the window borders and pannes are rendered pretty quickly, but the content shows up very slowly. Also mouse movements are recognised by the Win 7 box only after some period. Are there some hidden settings in the RDP, where one could turn some advanced features off or turn some caching on? I use Bitmap Caching, but this apparently doesn't help.

  Read the article

• ADFS Relying Party

  - by user49607

  I'm trying to set up an Active Directory Federation Service Relying Party and I get the following error. I've tried modifying the page to allow <pages validateRequest="false"> to web.config and it doesn't make a difference. Can someone help me out? Server Error in '/test' Application. A potentially dangerous Request.Form value was detected from the client (wresult="<t:RequestSecurityTo..."). Description: Request Validation has detected a potentially dangerous client input value, and processing of the request has been aborted. This value may indicate an attempt to compromise the security of your application, such as a cross-site scripting attack. To allow pages to override application request validation settings, set the requestValidationMode attribute in the httpRuntime configuration section to requestValidationMode="2.0". Example: <httpRuntime requestValidationMode="2.0" />. After setting this value, you can then disable request validation by setting validateRequest="false" in the Page directive or in the <pages> configuration section. However, it is strongly recommended that your application explicitly check all inputs in this case. For more information, see http://go.microsoft.com/fwlink/?LinkId=153133. Exception Details: System.Web.HttpRequestValidationException: A potentially dangerous Request.Form value was detected from the client (wresult="<t:RequestSecurityTo..."). Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [HttpRequestValidationException (0x80004005): A potentially dangerous Request.Form value was detected from the client (wresult="<t:RequestSecurityTo...").] System.Web.HttpRequest.ValidateString(String value, String collectionKey, RequestValidationSource requestCollection) +11309476 System.Web.HttpRequest.ValidateNameValueCollection(NameValueCollection nvc, RequestValidationSource requestCollection) +82 System.Web.HttpRequest.get_Form() +186 Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.IsSignInResponse(HttpRequest request) +26 Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.CanReadSignInResponse(HttpRequest request, Boolean onPage) +145 Microsoft.IdentityModel.Web.WSFederationAuthenticationModule.OnAuthenticateRequest(Object sender, EventArgs args) +108 System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +266 `

  Read the article

• Clarification on signals (sighup), jobs, and the controlling terminal

  - by asolberg

  So I've read two different perspectives and I'm trying to figure out which one is right. 1) Some sources online say that signals sent from the controlling terminal are ONLY sent to the foreground process group. That means if want a process to continue running in the background when you logout it is sufficient to simply suspend the job (ctrl-Z) and resume it in the background (bg). Then you can log out and it will continue to run because SIGHUP is only sent to the foreground job. See: http://blog.nelhage.com/2010/01/a-brief-introduction-to-termios-signaling-and-job-control/ ...In addition, if any signal-generating character is read by a terminal, it generates the appropriate signal to the foreground process group.... 2) Other sources claim you need to use the "nohup" command at the time the program is executed, or failing that, issue a "disown" command during execution to remove it from the jobs table that listens for SIGHUP. They say if you don't do this when you logout your process will also exit even if its running in a background process group. For example: http://docstore.mik.ua/orelly/unix3/upt/ch23_11.htm ...If I log out anyway, the shell sends my background job a HUP signal... In my own experiments with Ubuntu linux it seems like 1) is correct. I executed a command: "sleep 20 &" then logged out, logged back in and pressed did a "ps aux". Sure enough the sleep command was still running. So then why is it that so many people seem to believe number 2? And if all you have to do is place a job in the background to keep it running why do so many people use "nohup" and "disown?"

  Read the article

• tod to avi mpg wmv, convert tod (.mpeg-2) to avi mpg wmv for Movie Maker.

  - by yearofhao

  Need to convert .tod (mpeg-2) to avi mpg wmv download from JVC Everio to PC with tod to avi mpg wmv converter convert tod to uncompressed/raw avi, mpg wmv Have a JVC Everio camcorder? Then you may encounter problems when saving the .tod files to your computer windows movie maker says it can't recognize and edit them to make videos. You may play them using media player but the problem is how to edit them? The bundled software Power cinema could be annoying, since you can only edit when the camera is plugged in to the PC - Power cinema can’t seem to edit from the saved clips alone. So, how do you save them to PC so that you can edit them without the camera and also using windows movie maker? JVC Everio Tod to avi mpg wmv converter costs you a penny to but help you perfectly convert tod file to AVI, MPG, WMV, YouTube FLV, MP4, DV, QuickTime.MOV or other common video formats with fast speed and while keeping the original HD quality. High definition TOD recordings from JVC Camcorders can playback fluidly, convert smoothly and edit professionally on with iOrgsoft TOD file converter iOrgsoft tod to avi mpg wmv Converter has been mostly used by Windows users who use Windows 7 or Vista, after the .tod (mpeg-2 the same codec) downloaded from JVC Everio to PC, it’s best to convert tod to avi, convert to xvid divx, convert tod to uncompressed avi or convert tod to raw avi, tod to mpg, tod to wmv, which are three Windows movie maker best formats to import. TOD to avi mpg wmv converter is a competent video-editing program that allows you to clip/cut TOD video clip, crop the video to encode, and help transfers video to devices like iPhone, iPod, to HDTV connected with Apple TV.

  Read the article

< Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >