Search Results

Search found 9409 results on 377 pages for 'boot loader'.

Page 301/377 | < Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >

  • 4TB HGST SATA drive only shows 1.62 TB in Windows Server 2012

    - by user136085
    I'm using a Supermicro X9SRE-3F motherboard with the latest BIOS and 2x 4TB drives connected to the on-board SATA controller. If I set the BIOS to RAID and create a RAID 1 array, the array shows up in the BIOS as 3.6TB. However when I boot Windows (on a separate RAID 1 array), the 4TB drives show up individually in disk manager as 2x 1.62TB drives. I could use Windows 2012 to set up software RAID 1, but when I set the BIOS back to 2x individual drives, they still show up in Windows as 2x 1.62TB drives. How do I access the full capacity of these drives? Thanks, Brian Bulaw

    Read the article

  • Update a war on Tomcat start up

    - by pater
    I want to setup an update process for an application running on Tomcat. The server which hosts tomcat is only open during working hours (it is an intraner application for a small company). I was thinking that I could upload the new war to the server and set up "something" to run on the next server boot. This something could be a bat file that will be executed on server start up but before the start up of the Tomcat service and it will delete the old war and its exploded folder. When I update manually the war I also delete the work folder of Tomcat (just to be sure). I know about hot deployment but I do not consider it an option since I am not very sure for the implications it might have on the users current working sessions. Is there a way to run such a bat file before Tomcat start up or an alternative way to do this update? Tomcat version isn't an issue. Now is running Tomcat 6 but I can upgrade to version 7 if needed.

    Read the article

  • Ubuntu PowerEdge T110

    - by Josh
    I just got a Dell PowerEdge T110 server. I moved the boot order to CD - HDD - NIC, then installed Ubuntu 10.10, Desktop Ed. I chose install alongside other OS (even though there was none), then chose use entire partition. It showed that Ubuntu would use 160 of the 160 available GB. It installed, updated (while installing), then said, need to eject and restart, as usual. It restarted, but to a blank screen. No output whatsoever. Not even BIOS. Just blank. The monitor isn't even woken from sleep. Power cycled, still doing it. Tested the monitor with a laptop, and it is fine. What on earth is going on here?

    Read the article

  • Function key emulator for Dell inspiron 6400 on external keyboard

    - by hardik988
    I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

    Read the article

  • Prevent Windows 7 from unpluging External HDD

    - by marverix
    I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

    Read the article

  • Browser-based Operating System

    - by Ross Peoples
    I have a bunch of touchscreen machines that I want to display a webpage on and have users interact with the webpage via the touchscreen. Right now, this is done with a full-blown OS with a browser set to run at startup. I think maybe the ideal solution is to use a Linux-based OS that boots up, starts X, then starts a web browser (Chrome, Firefox, or whatever) in full screen mode. What kind of options do I have? I really want to avoid using a full-blown OS like I do now. It looks unprofessional and takes a while to boot up. I was thinking maybe Chrome OS or something, but I wouldn't know how to set it up for my purposes, since it's still designed to be used as a desktop OS instead of a kiosk-type OS.

    Read the article

  • Weird problem, special characters after formatting the hard drive, computer not starting 0_o

    - by m3taspl0it
    Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

    Read the article

  • Restore iPod Touch

    - by Jason
    Ok.... So I'm part of the iOS developer program and downloaded iOS 6.0 Beta to my iPod Touch. But, I was having troubles getting XCode Beta to run so I tried to downgrade back to the current 5.1.1. Halfway through the downgrade, the process encountered an error. Now my iPod won't boot. I tried restoring it in iTunes, but I think it's trying to restore it to version 6.0, not finding it on the Apple website since it's not out yet, and failing. Any ideas on how to restore my ipod??

    Read the article

  • Clone a 2TB WD Green internal drive with bad sectors to a 3TB partitioned external

    - by ron
    I have a 2TB WD Black drive and would like to simply do a straight clone from a failing 3TB drive to it. Both are SATA. Will I be able to just install the new drive alongside the faulty one and then do the clone/rescue attempt with ddrescue or is there a better method? The faulty internal drive mentioned has bed sectors although am usually able to boot into Windows 7 Ultimate with it and navigate and access all my programs. I have been attempting some trials with an Ubuntu Live CD using ddrescue but am not sure I'm doing it right. I have a 3TB WD my book essential external which is GPT and have created a separate 2TB partition on it which I am trying to clone to. I assume I need to format the new drive first to NTFS? Can I do that via the Ubuntu Rescue Remix 12-04 live DVD that I've been booting with?

    Read the article

  • Computers "applying computer settings" for a long time on start-up...why?

    - by tombull89
    Hello. Might be a bit of a slong shot but I'm stumped, along with the ICT Manager for the school I'm working it. In one of the IT rooms when you switch a computer on it will boot through BIOS fine, but when it gets to "applying computer settings" it can hang for a long time (~15 minutes). If you unplug the computer from the network it starts up fine, gets to the login screen, then you can plug the network cable in and it will work fine. I don't think it's anything to do with the fact we've been coming close to running out of IP addresses or a problem with our DHCP. Microsoft KB says apply the latest service pack, which we've done, and check a service. Servers and domian controllers are S2003, Computers and Desktops are XP. Does anybody have any thoughts on what to try?

    Read the article

  • How do I import Outlook 2007 accounts and rules and IE usernames and stored passwords from old HD?

    - by raya
    I had an older PC running Win7 and the motherboard died on me. I've since updated my PC to another Win7 machine running a RAID 0 along with my old HDD installed as an extra drive. The problem is, I need to somehow import my Outlook email accounts (10) and rules along with my IE usernames and adjacent stored passwords for all the sites I've visited. I don't want to have to recreate the wheel for all this data. What I've found is that I have to run regedit in order to do so, but I cannot seem to boot to the old drive in order to run regedit and export the files. Can someone please help me?

    Read the article

  • Hibernate speed, and hard drive temperature

    - by cometbill
    My computer is taking in the region of 4 minutes or so, to hibernate 4GB of RAM. Also, resting my hand on the top of it is rather hot to the touch, so I ran CrystalDisk Info and that is reporting a temperature of 49 degrees C. I It's a Western Digital 5400 rpm drive, I've had it in the laptop since I bought it for most of the 2.75 years I've had it. Power on Count is 1219 Power on Hours is 3940 hours Boot up time is quicker than resuming from hibernate, too. Is there anything I can / should check ? Advice is greatly appreciated.

    Read the article

  • Windows 7 just corrupted Microsoft F# and now won't fix itself.

    - by user225626
    I lost half a year's worth of custom CGAL/GMP/LEDA/Qt3/Qt4/MPFR/MPFI/Visual Studio/Boost/blahblahblah open source nonsense with DLLs that are scattered in various parts of the OS that I had gotten to finally work. All because F#, which came with .NET 4 and which I never, ever used, is now "corrupted" one day for reasons only Windows 7 knows, and now Windows 7 won't even boot. Of course none--none--of the above setup works as accessed from the USB port. How do I remove a corrupted file that prevents a Windows 7 from booting, or even being fixed by an external CD mount of the Windows 7? Thanks for any help.

    Read the article

  • Create a Windows 7 System Repair ISO?

    - by MaDMaD Mad
    According to the Microsoft website I can run "Create a system repair disc" from the start menu to burn a recovery Disc. However, there are many situations (including not having a disk drive) where this cannot be done. My goal is to create a bootable USB drive according to this guide but their method to do so without burning a physical disc includes downloading an ISO from "somebody's" website. I don't know who "somebody" is and I feel it is reasonable to not boot something I can't verify as being untampered with. To the best of my knowledge, Microsoft does not host a recovery disc ISO for download as this would be the easiest solution. So my problem is that I'd like to circumvent Microsofts "burn to disc" option with a "burn to ISO" through any reasonable means.

    Read the article

  • User reduced LVM logical volume without resizing filesystem

    - by Matthew
    I received an email yesterday that one of our users was trying to make room for a heartbeat/clustering package which requires its own partition to act as a voting disk. To do this, he attempted to reduce the size of the root partition's logical volume, and then create a new logical volume for this purpose. However, he forgot to resize the filesystem first (or include the -r switch in the command). He also forgot to unmount the root partition by running this process from a rescue cd. The system is now refusing to boot into the OS with the following error: Either the superblock or the partition table is likely to be corrupt! Unexpected Inconsistency; run fsck manually. The system them drops the user into single user mode. Is it possible to rescue the filesystem, or is it hosed? Its running ext3.

    Read the article

  • Newbie: VirtualBox "no bootable medium found"

    - by Newton Falls
    My first foray into VM land so please excuse the stupidity expressed below. Running VirtualBox on Kubuntu 9.10 and trying to set up a VM running Windows 7. Windows 7 came installed and is functional as a dual-boot but I want to stay in kubuntu hence the VM. Received "Fatal: no bootable medium found" when trying to start a VM. Not surprising since VBox never gave me an option (that I recognized anyway) to tell it to look on the hard drive. I did not receive a CD of Windows 7 with the machine. How can I tell VirtualBox to grab what it needs from the hard drive? Or am I out of luck because I don't have a CD? Update: This might not be possible. The installed Windows 7 is useful only to pull the installation key. It is easier to just to download or get an ISO from a friend and enter in your own key.

    Read the article

  • Pygrub with DRBD on Xen 3.2

    - by Joril
    Hi all, we have a two-node cluster using DRBD 8.2 on CentOS 5.2 64bit. The cluster runs a few VMs on top of Xen 3.2.1, here's the configuration for an Ubuntu Jaunty VM: name = 'dev' bootloader = '/usr/bin/pygrub' memory = '512' vif = [ 'ip=192.168.1.217,mac=00:16:3E:CD:60:80' ] disk = [ 'phy:/dev/drbd24,xvda1,w', 'phy:/dev/drbd25,xvda2,w' ] As you can see, the disks are specified like "phy:", and as such pygrub doesn't know a thing about the underlying drbd device... So my problem is that even though the VM boots just fine, it doesn't handle the state of the drbd device. As a result, when for some reason the device gets to a secondary/secondary state, the VM won't boot, and I have to manually specify which node is primary. I read that starting with Xen 3.3 pygrub understands the "drbd:" specification, and I think that it would fix my problem, but I can't upgrade Xen at the moment... Is there a workaround? For example, could I use the 3.3 version of pygrub? Thanks!

    Read the article

  • Reboot loop after Windows XP Service Pack 3 update

    - by espais
    Recently I upgraded to Service Pack 3, and now it seems that something has gone terribly wrong with the update. After logging in, my computer will blue screen after about 5 minutes and then go into a reboot loop (I don't have the exact error message handy). I have a Sager NP2092 notebook, running an Intel chipset. I'd rather avoid having to reformat my XP, especially with my copy of Windows 7 arriving right around the corner. After doing some Googling, I came across this article: Does your AMD-based computer boot after installing XP SP3? However, it deals with the AMD chips, and specifically states not to use its fix on Intel based systems. EDIT After killing the reboot, this is the error that pops up: STOP: 0x000000F4 (0x00000003, 0x8A187118, 0x8A18728C, 0x80604438) EDIT2 I have run Memtest86, and it reported 0 errors.

    Read the article

  • Windows XP - Repairing Corrupt System32\Config\System File

    - by SimonTewsi
    My apologies for this long post. I would like to describe the mess I'm in then ask some questions about how to fix it: Starting up my Windows XP SP1 machine I got the following message: Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM Tried restarting several times with same results then Googled the problem. Tried the fix described here: http://icrontic.com/articles/repair%5Fwindows%5Fxp (since my CPU does not have XD buffer overflow protection I did not set /NOEXECUTE=OPTIN as OS Load Option). This did not work. I then found another fix for the problem on hardwareanalysis.com: Basically, boot to dos prompt (or recovery console if available) and make backups of the following files:- c:\windows\system32\config\system (to c:\windows\tmp\system.bak) c:\windows\system32\config\software (to c:\windows\tmp\software.bak) c:\windows\system32\config\sam (to c:\windows\tmp\sam.bak) c:\windows\system32\config\security (to c:\windows\tmp\security.bak) c:\windows\system32\config\default (to c:\windows\tmp\default.bak) then delete the above files (not the backups!) then copy the above files in c:\windows\repair to the c:\windows\system32\config directory restart your computer This did work (and I wish I'd done it first, since it was completely reversible, unlike the first method). However, afterwards I found that all the user accounts on the PC were gone. I resurrected them by copying the backed up security file back into the system32\config folder (I may have copied the SAM file from backup as well, I cannot remember clearly now). Now the PC boots up and I can log in. However things are still not right. I tried to alter one of the user accounts and found I could not access the User Accounts in the Control Panel. Microsoft KB 919292 had a fix for the problem. However, the fix failed with a Windows Installer error: The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer 3.1 was already installed. I reinstalled it but continued to get the Windows Installer error whenever I tried to run the fix in KB 919292. I have since noticed another three problems: 1) Several applications on the PC no longer run, eg Microsoft Word. Shortcuts no longer seem to do anything and if I run the executables directly (eg for Word by running C:\Program Files\Microsoft Office\Office10\Winword.exe) I get a message similar to: "Microsoft Word has not been installed for the current user. Please run setup to install the application." even though the executable is clearly visible in Windows Explorer (and even though Word actually opens - the error dialog appears after Word has opened. Clicking OK to the error dialog closes Word). 2) One or the other of the two fixes I tried for the original problem caused new user profiles to be created. eg My old user profile under the Documents and Settings folder was Simon. The old one still exists but there is now a new one called Simon.DBQ2515. Obviously the new one is being used because Opera (my browser that still works) no longer sees the bookmarks file under my old profile. 3) Probably as a result of fooling around with the Security file, when I try to boot off the Windows XP CD and run the Recovery Console I am now asked for the administrator password. The only problem is there is no administrator account on the PC. There is one account, LocalAdmin, that has administrative rights but when I entered the password for that account it did not work. It is so long since I originally set up the PC that I cannot remember if the original administrator account ever had a password and, if so, what it was. So, my question is: How can I fix this mess? In particular: 1) Having tried the two fixes linked to above, have I irrepairably damaged the Windows instance, requiring a clean reinstallation of Windows + all applications, or should it be possible to get the machine working correctly again without such drastic measures? 2) Is there any way to get around the administrator password so I can use the Recovery Console again, given that there is no account called "administrator" and the password for the one account with admin privileges does not work (and that, before I started the second fix, I was not asked for an administrator password)? 3) Is there any easy way to fix the problem with the applications that think they are not installed? 4) Is there any easy way to fix the problem of the Windows Installer that does not work, even if reinstalled? Cheers Simon

    Read the article

  • GNOME/KDE Linux entirely in RAM?

    - by František Žiacik
    Hi. I'd like to have very responsive linux but I also like modern, elegant and functional desktops like gnome or kde, not the lightweight ones like xfce or lxde. Once I tried PuppyLinux and was impressed by the responsivity when I clicked an application. In my Ubuntu, it bothers me much when I click chromium and must wait 5 seconds of disk flashing until main window appears. Or evolution or anything else. Is it possible to make GNOME or KDE run entirely in RAM like PuppyLinux (of course, I mean frequently used applications and services, not all) if you have enough of it? I don't care if boot time is longer. I tried using "preload" but it didn't help much.

    Read the article

  • What did Emolator do with My Laptop?

    - by Garry
    I played SEGA with my KEGA.exe (Sega Emulator) and it made my right key to be malfunctioned. Befor that day, I had played it, too in my notebook with fullscreen mode, and suddenly my ACER Aspire One notebook restarted during that emulator was running and before the screen was black (boot), my screen was blue with many words but I couldn't read them, but I remember that there was a word like 000000 x 0000000 x 000000 and bla bla bla. And when I played without fullscreen mode, It didn't happened but it made my right key to be malfunctioned until when I went to Bot setup, my right key doesn't work. Do U know what is the problem of my emulator? Can U explain me for that?

    Read the article

  • How do you persist installed software & configurations on an Amazon EC2 instance?

    - by Richard
    I've gotten a base Debian AMI up and running and now I need to know the best way to maintain it. I've ran the updates (aptitude update/upgrade) and installed/configured my software (Apache, Ruby, etc.) but if I reboot the instance or start a new one I'll have to do all this work over again. How do you persist these types of things over a reboot? Do you build a new AMI every time you adjust some tiny piece of the system? Or is there some way to feed it a script on startup that configures it in "real-time"? I know I could go all the way with a Reductive Labs Puppet style setup but that's a bit too much for my needs right now (1-2 servers). Any best practices on this? Update: I found a bit of information on using User-Data to run scripts at instance boot time.

    Read the article

  • What is a good motherboard for the Intel i7 series processor?

    - by jasondavis
    I am lost on choosing a good miotherboard at a decent price for my Intel i7-930 CPU. I have read bad things about all of them so far. Issues with RAM not working correctly, Windows not loading with USB keyboards plugged in and all kinds of nightmare stories. Here is my needs. - 6g/b SATA 3 - USB 3.0 - Cheaper is better - Support for up to 24gb of RAM, I will start out with only 12gb though - I will use 64bit v. of Windows 7 so the 4gb RAM limit should not be a problem from my OS - Should be able to boot even if I have a USB keyboard plugged in. If you have experience with a motherboard that meets these specs, please do tell about it. I appreciate any help, I am stuck right now on picking a good board.

    Read the article

  • apache not starting in vagrant vm

    - by jimmyjambles
    I used Puphpet.com to create a Vagrant VM to be used for web development. The problem I am having is that the VM cannot start apache on boot. $ sudo /etc/init.d/apache2 start * Starting web server apache2 * * The apache2 configtest failed. Output of config test was: apache2: Syntax error on line 36 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/authz_default.load: Cannot load /usr/lib/apache2/modules/mod_authz_default.so into server: /usr/lib/apache2/modules/mod_authz_default.so: cannot open shared object file: No such file or directory Action 'configtest' failed. The Apache error log may have more information. the system is ubuntu 12, not sure what modifications I have to make to the puppet config to fix the problem.

    Read the article

  • How can I guess if a USB cable will power my devices?

    - by rsanchez
    I've had problems with one long (4 meter) USB Mini-B to USB Type-A cable not being able to boot a 2.5'' external hard disc due to not supplying enough current. On top of that, the cable used a Type-A to Mini-B adapter for the Mini-B part, which probably made things worse. Three different shorter cables I got around made the hard disk work without extra current, so it was definitively the cable's fault. However, if I plugged the hard disk to the power, and used the long cable just for data it worked. Here is some related information on powering through USB cables: http://www.girr.org/mac_stuff/usb_stuff.html I have not any long cables that don't have an intermediary Type-A to Mini-B adapter to try them out. My question is: is there a way to guess if a cable will provide enough power for charge/disk drive power? Is it related to the length of the cable, to the build quality of the cable, or the fact that uses intermediary adapters?

    Read the article

< Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >