Search Results

Search found 32459 results on 1299 pages for 'internet connection'.

Page 301/1299 | < Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >

  • Virtual Machine Network Architecture, Isolating Public and Private Networks

    - by Mark
    I'm looking for some insight into best practices for network traffic isolation within a virtual environment, specifically under VMWARE ESXi. Currently I have (in testing) 1 hardware server running ESXi but i expect to expand this to multiple pieces of hardware. The current setup is as follows: 1 pfsense VM, this VM accepts all outside (WAN/internet) traffic and performs firewall/port forwarding/NAT functionality. I have multiple public IP addresses sent to the this VM that are used for access to individual servers (via per incoming IP port forwarding rules). This VM is attached to the private (virtual) network that all other VMs are on. It also manages a VPN link into the private network with some access restrictions. This isn't the perimeter firewall but rather the firewall for this virtual pool only. I have 3 VMs that communicate with each other, as well as have some public access requirements: 1 LAMP server running an eCommerce site, public internet accessible 1 accounting server, access via windows server 2008 RDS services for remote access by users 1 inventory/warehouse management server, VPN to client terminals in warehouses These servers constantly talk with each other for data synchronization. Currently all the servers are on the same subnet/virtual network and connected to the internet through the pfsense VM. The pfsense firewall uses port forwarding and NAT to allow outside access to the servers for services and for server access to the internet. My main question is this: Is there a security benefit to adding a second virtual network adapter to each server and controlling traffic such that all server to server communication is on one separate virtual network, while any access to the outside world is routed through the other network adapter, through the firewall, and on the the internet. This is the type of architecture i would use if these were all physical servers, but i'm unsure if the networks being virtual changes the way i should approach locking down this system. Thank you for any thoughts or direction to any appropriate literature.

    Read the article

  • Setting a Preferred Network Adapter for browsing

    - by ala
    My PC at work is connected to 2 networks; LAN: local corporate network for remote desktop access and very slow internet connection WAN: wireless faster internet browsing Is there a way to setup the default/preferred network adapter for the internet browsing?

    Read the article

  • Accessing localhost via IIS 7.5 on Windows 7 very slow

    - by Ian Devlin
    (I've asked this over on stackoverflow already, but thought I'd ask here as well) I'm currently running an ASP.NET application on IIS 7.5 on Windows 7. When I access this application on Internet Explorer (either 6, 7 or 8) it is incredible slow and often fails to load at all. There are messages at the bottom saying: Waiting for http://localhost/....... or sometimes waiting for about:blank (I've read that this can be a virus, but I've run all the usual checks and it's not). constantly, but it returns with the usual: "Internet Explorer cannot display the webpage" I've also tried this by using 127.0.0.1 and the machine name, with the same results. I've tried the same application on the latest Firefox, Safari, Chrome and Opera and they all work fine. I've also installed the same application on a Windows Server 2003 machine, and it all works fine via Internet Explorer. I've also turned off the IPv6 setting on the LAN connection. Soes anyone have any ideas why this doesn't work with Internet Explorer and yet does with other browsers?

    Read the article

  • Maximizing TCP connections on HAProxy load balancer

    - by imaginative
    I am currently using HAProxy in order to load balance tcp connections from clients to my Erlang app server. The connection is persistent, which means I'm limited to roughly 64K clients on an optimized server (I'm currently running HAProxy on an m1.large EC2 instance). My app server is designed to horizontally scale based on the number of TCP connections. What's worrying me though is I'll need an equal number of HAProxy servers as app servers since it's a 1:1 connection. Is there currently a way to "proxy" the tcp connection to the app server so that once HAProxy sends the client off to my Erlang server, it can free up the connection, ready to serve another client? Are there any papers, existing solutions out there I can read so that I only have to worry about the 64K limit on my app servers, and not on the load balancing servers themselves?

    Read the article

  • ISA 2000 and COD MW2 Steam

    - by twlichty
    OK, so maybe not the "proper use" of network resources, but we enjoy the odd COD game during lunch hours. When we played COD4, we had a dedicated server setup at the back of the server room. With MW2, we need to be able to connect to steam to be able to play multi-player. I've found this support article here: https://support.steampowered.com/kb%5Farticle.php?ref=8571-GLVN-8711 Which outlines all the ports I need to open. I went through and created the following rules in ISA 2000 (I'm stuck with 2000 for now). Protocol Definition: Steam Primary connection: Port 27000, UDP, Send Receive Secondary Connection: Port range 27001-27030 Send Receive Protocol Definition: Steam TCP In Primary connection: 27014, TCP, Inbound Secondary Connection: Port range: 27015-27050, Inbound Protocol Definition: Steam 4380 Primary connection: 4380, UDP, Send Receive When I start steam on my local workstation (I did add an exception to the Vista Firewall to allow steam), the steam client sits on "Updating Steam" for 5 minutes then errors out with: You must connect to the internet first. Any ideas? I assume I missed something. Thanks for your help.

    Read the article

  • freeradius maximum session time problem

    - by haw3d
    hello I'm using openvpn and free-radius for control user accounts. for maximum session time for an user, free-radius has sqlcounter.conf that control that, but after a connection has disconnected that is useful and cannot destroy a connection. for control account time dynamically i need another script that do that. but should anytime that a connection has established a trigger run. is anyway to fire a custom trigger or script when a connection has established? or any way to control session time dynamically?

    Read the article

  • SSL certificate selection based on host-header: is it possible?

    - by DrStalker
    Is it possible for a web server to select an SSL certificate to use based on the host-header of the incoming connection, or is that information that is only available after the SSL connection is established? That is, can my webserver listed on port 443 and use the foo.com certificate if https://foo.com is requested, and the bar.com certificate if https://bar.com is requested or am I trying to do something impossible because the server has to establish an SSL connection before it knows what the client wants?

    Read the article

  • Route through site-to-site VPN not working

    - by Jonathan
    I'm trying to set up a site-to-site VPN using RRAS on two 2K8r2 servers since yesterday. The connection is working at this point, but I can't get it to send traffic from one site to the other one. Set up: the set up is the same on both sites: the server is connected to a router that's connected to a modem. The routers act like a DHCP-server and assign IP addresses from the range subnet.21-subnet-.100. Both servers use a static IP address, subnet.11, and are set up as DMZ. Configuration: the servers are configured using the wizard to set up a site-to-site connection. This works with a demand-dial interface and a PPTP VPN connection. As mentioned, the VPN connection work properly. Problem: I can't get the servers to send the traffic for the other site, to be sent through the VPN connection. I added a static route on both server (home, office 1) and I can see the result in the IP routing table (home, office 1). I did this because the route didn't show up automatically. My guess is that this last step isn't right, for example because the routing table states "non demand-dial", which seems not correct. Home: Subnet: 10.0.1.0/24 Router: 10.0.1.1 Server: 10.0.1.11 (DMZ) DHCP: 10.0.1.21-10.0.1.100 RRAS DHCP: 10.0.1.101-10.0.1.150 Office 1: Subnet: 10.0.2.0/24 Router: 10.0.2.1 Server: 10.0.2.11 (DMZ) DHCP: 10.0.2.21-10.0.2.100 RRAS DHCP: 10.0.2.101-10.0.2.150 I hope someone has an idea to get this route working!

    Read the article

  • Create a wifi hotspot in a place where an authentication is required

    - by SoftTimur
    I live in a residence where Internet is provided via cable. Once the computer is connected to the cable, launching a browser will trigger an authentication, I have a username and password to enter, then the internet will be connected. With a gateway (e.g. Wireless Cable Voice Gateway Model CBVG834G) and 2 cables, two PCs can connect to the Internet with my account at the same time. Now the question is, I don't like the cable, and would like to create a wifi hotspot. It seems realizable with the same gateway. According to the instruction on page 2-4 of the manual: Enter http://192.168.0.1 in the address field of your Internet browser. Log in to the gateway with either of the default user names, MSO or admin... However, while connecting to the Internet successfully via cable and the gateway (e.g. google works), opening 192.168.0.1 oddly gives me an error on the browser: Does anyone know what happened? Is it due to the authentication required by my residence? Is there any other way to build a hotspot of wifi? PS: My system is MAC OS

    Read the article

  • How do I configure dual WAN links for failover on a Cisco 891?

    - by Donjo
    I have a Cisco 891 that is going to be connected to 2 WAN links, a DSL connection and a cable connection. I'm not so concerned with load balancing between them because the DSL connection speed is a drop in the bucket when compared to the cable speed though it would be nice if it worked that way. I mainly just want to force all traffic through the cable WAN link unless it goes down. I'm not really sure what feature set I should be researching.

    Read the article

  • 12.04 GPU lockup

    - by soandos
    I was able to install Ubuntu 12.04 using the alternative version of the image, (64 bit) but when I start the system it tells me the GPU locked up, and instead presents a text only screen. I understand that this site is not for bug reports, but at the same time, I know that there are some versions of the installer than have to be compatible with my graphics card (Nvidia GTS 360M). I assumed that the mere fact that the alternative installer ran was an indication that I could get some sort of graphical interface running after the install. Is there some way of getting some type of graphical interface running on my machine? Even better would be is there a way to get the rest of the system running as normal (i.e. GPU up and running)? If an internet connection is required to download driver support or something similar, directions for how to configure a wireless connection with WPA2-Personal protection from the text-only interface (bash). Any help would be appreciated. Note: I was able to find this which tells me that the card is supported. Note 2: In the install software stage of the install, I was unable to install anything (no internet connection) Update: The exact error message is [8.591394] [drm] 0000:01:00.0: GPU Lockup - switching to software fbcon Update 2: If I try to install with the regular version of Ubuntu, the screen goes staticy. This also happens if I install with Wubi (distasteful I know) and then try to use Ubuntu. Update 3: I've tried xforcevesa, nomodeset and xforcevesa nomodeset as my wubi boot options. Update 4: Thanks to jokerdino, I can now connect to the internet, so internet tools would now be a possibility.

    Read the article

  • How to get wireless working (properly) with Sitecom Wireless USB micro adapter 300N on Windows 7?

    - by Timo
    The question says it all, but more detail follows ;) I've got a new computer that runs Windows 7 64-bits (Home Edition) and I'd like to connect it to my wireless home network (Sitecom wireless gigabit router 300N wl-352 v1 002) with a Sitecom wireless USB micro adaptapter 300 wl-352 V2 001. After installing the router (i.e. connected to the modem and power) and ensuring that wireless is indeed enabled, I've installed the driver of the USB adapter on the new computer described above. After the installation (drivers and utility on CD) completes successfull I rebooted my computer and inserted the USB adapter. After discovering the right network and connecting to it using the network key, a connection is succesfully made. (Using the Sitecom 300N USB Wireless LAN utility). In the LAN utility I can see that the signal strength is approximately 50% and connection quality is approximately 80%. Judging from these numbers I assumed that all was fine and started to use the connection (reading news on nu.nl, a dutch news site), but noticed that the connection was lost several times in a very short time span, but each time the connections was resumed, resulting in the 50/80 percent numbers described above. However, the website was not loaded completely and often a timeout would be reported. When inspecting the drivers through Device Management (Windows' Apparaatbeheer in dutch) there were no errors/warnings; everything seemed to be in order. In an attempt to solve this, I downloaded the latest drivers for the USB adapter, but the problems remained. Finally I tried to connect the computer with a Siemens Gigaset USB Adapter 108. This process was a troublesome since I had to download a driver (from the site above) and tell Windows (7) to use the Windows Vista driver when installing the new hardware, since there is (was) no Windows 7 driver available. This resulted in a usable connection, although not very stable when reconfiguring the router. Which took the form of selecting a different wireless channel on the router, even using the Sitecom utility mentioned above to check if there were other networks communicating on that channel (and thus picking a channel that was not used by other networks). Again no result when changing back to the Sitecom USB adapter. Note that this means (I think) that I could use the internet connection with the Siemens adapter, meaning the problem was not in the router. So: How to get wireless working (properly) with Sitecom Wireless USB micro adapter 300N on Windows 7? PS Sorry, but should be able to post one link, while I had links in place for the USB adapter, router and the siemens adapter in place as well, but I'm not (yet) allowed to post these... (The site says I can post one link, but only when no links are present will it allow me to post the question...)

    Read the article

  • Accessing SQL with the PC name not the IP

    - by Cornelius
    I'm trying to connect to a SQL instance (default instance) on a machine. When using the IP of the machine it connects to the machine. Using the name of the machine on that machine you are able to establish a connection to the SQL instance but using the machine name on another PC the connection cannot be established. And gives the error A network-related or instance-specific error occurred while establishing a connection to SQL Server. ... (Microsoft Server, Error: 10060) The machine that I am trying to establish the connection from can ping the machine with the SQL instance both on the IP and on the name. Why would this be and how can I fix it? Edit: pinging the name does resolve the correct IP. Pinging the FQDN also works correctly.

    Read the article

  • Connect using sqlplus to db server through multiple tunnels

    - by Samuel Lindblom
    I would like to create an SQL Developer connection to a database through a couple of tunnels. The steps right now are: Connect to server A - connect to server B - run sqlplus against tnsname on a server that I do not have ssh access to. Is there an easy way of using SQL Developer instead of sqlplus? I have read through 20 articles on the subject and still have no idea how to actually make the connection. I understand that you can chain ssh -L commands to get the server connection, but I don't know how to use that connection in SQL Developer.

    Read the article

  • background jobs and ssh connections

    - by petrelharp
    This question has come up quite a lot (really a lot), but I'm finding the answers to be generally incomplete. The general question is "Why does/doesn't my job get killed when I exit/kill ssh?", and here's what I've found. The first question is: How general is the following information? The following seems to be true for modern Debian linux, but I am missing some bits; and what do others need to know? All child processes, backgrounded or not of a shell opened over an ssh connection are killed with SIGHUP when the ssh connection is closed only if the huponexit option is set: run shopt huponexit to see if this is true. If huponexit is true, then you can use nohup or disown to dissociate the process from the shell so it does not get killed when you exit. If huponexit is false, which is the default on at least some linuxes these days, then backgrounded jobs will not be killed on normal logout. But even if huponexit is false, then if the ssh connection gets killed, or drops (different than normal logout), then backgrounded processes will still get killed. This can be avoided by disown or nohup as in (2). There is some distinction between (a) processes whose parent process is the terminal and (b) processes that have stdin, stdout, or stderr connected to the terminal. I don't know what happens to processes that are (a) and not (b), or vice versa. Final question: How can I avoid behavior (3)? In other words, by default in Debian backgrounded processes run along merrily by themselves after logout but not after the ssh connection is killed. I'd like the same thing to happen to processes regardless of whether the connection was closed normally or killed. Or, is this a bad idea?

    Read the article

  • Configuring network route between two routers on home network

    - by Paul
    I have a home network - the main router connected to the internet (and has wifi) is a Netopia box. Connected to it is a Linksys router. Everything currently works - I can connect via the wireless network and get to the internet. Machines connected to the Linksys can connect with each other and connect to the internet. Both routers are configured to serve addresses via DHCP (Netopia 192.168.1.1 - 192.168.1.99), Linksys (192.168.0.1 - 192.168.0.100). Here's how they are connected: Internet <-> Netopia w/wifi (192.168.1.254) <-> Linksys (192.168.0.1) I decided I really need to allow wireless connections to also communicate with machines behind the Linksys router. Currently the Linksys is configured to obtain an IP address via DHCP. I thought this would be straightforward. I configured the Linksys to have a static IP address: IP: 192.168.1.100 Mask: 255.255.255.0 GW: 192.168.1.254 Then I configured a static route on the Netopia: Network: 192.168.0.0 Mask: 255.255.255.0 GW: 192.168.1.100 So it should now look like this: Internet <-> Netopia w/wifi (192.168.1.254) <-> (192.168.1.100) Linksys (192.168.0.1) I reset both routers. I cannot ping the Netopia (192.168.1.254) from inside the Linksys network, and if I attempt to ping 192.168.0.1 from a wifi connection I get a "Destination host not available" error. Obviously I'm missing something, but I'm not sure where. Any ideas on what I'm missing?

    Read the article

  • Can / how to install openSUSE as a GUI-less home server with only wifi?

    - by Dougal
    Hello there, I'm following an article to set up openSUSE as a commandline server (http://www.howtoforge.com/perfect-server-opensuse-11.1). It seems to only work for wired internet connections. Is there any way to install openSUSE as a commandline server in my home network but using a wifi internet connection? Preferably from the get-go and not simply installing with LAN cable internet and then installing some wifi things later. Or, perhaps, to rephrase the question "How can I get the openSUSE install / post-install procedure to recognize my wifi internet connection?" Kind regards, Dougal

    Read the article

  • Keep source IP after NAT

    - by John Miller
    Until today I used a cheapy router so I can share my internet connection and keep a webserver online too, while using NAT. Users IP ($_SERVER['REMOTE_ADDR']) was fine, I was seeing class A IPs of users. But as traffic grown up everyday, I had to install a Linux Server (Debian) to share my Internet Connection, because my old router couldn't keep the traffic anymore. I shared the internet via IPTABLES using NAT, but now, after forwarding port 80 to my webserver, now instead of seeing real users IP, I see my Gateway IP (Linux Internal IP) as any user IP Address. How to solve this issue? I edited my post, so I can paste the rules I'm currently using. #!/bin/sh #I made a script to set the rules #I flush everything here. iptables --flush iptables --table nat --flush iptables --delete-chain iptables --table nat --delete-chain iptables -F iptables -X # I drop everything as a general rule, but this is disabled under testing # iptables -P INPUT DROP # iptables -P OUTPUT DROP # these are the loopback rules iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # here I set the SSH port rules, so I can connect to my server iptables -A INPUT -p tcp --sport 513:65535 --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 --dport 513:65535 -m state --state ESTABLISHED -j ACCEPT # These are the forwards for 80 port iptables -t nat -A PREROUTING -p tcp -s 0/0 -d xx.xx.xx.xx --dport 80 -j DNAT --to 192.168.42.3:80 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p tcp -s 192.168.42.3 --sport 80 -j ACCEPT # These are the forwards for bind/dns iptables -t nat -A PREROUTING -p udp -s 0/0 -d xx.xx.xx.xx --dport 53 -j DNAT --to 192.168.42.3:53 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p udp -s 192.168.42.3 --sport 53 -j ACCEPT # And these are the rules so I can share my internet connection iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0:1 -j ACCEPT If I delete the MASQUERADE part, I see my real IP while echoing it with PHP, but I don't have internet. How to do, to have internet and see my real IP while ports are forwarded too? ** xx.xx.xx.xx - is my public IP. I hid it for security reasons.

    Read the article

  • How do I set up a bridge on Ubuntu GNOME 14.04

    - by NJRandy
    I found a guide for setting up a bridge in Fedora and was trying this: $ nmcli connection delete p33p1 $ nmcli connection add con-name br0 type bridge ifname br0 autoconnect yes $ nmcli connection add con-name p33p1 type bridge-slave ifname p33p1 master br0 autoconnect yes I found that $ nmcli con delete uuid [uuid here] accomplished the first step. nmcli connection does not have an 'add' action in this distribution. Please help me do the 2nd and 3rd steps. Context: I am trying to set up a virtual machine. I believe this is a necessary step for the VM to access my network and the internet. Please feel free to correct me if I am wrong! BTW, I am a linux newbie, tech oldie. Thank you.

    Read the article

  • http port 80 slow, while other ports are fine

    - by lydonchandra
    I am using ADSL2+, and the sustained connection can go up to 1.3MB/s, but recently the HTTP connection has been quite slow ( other port i.e. ftp, torrent, etc are fine). I am using Netgear modem/router for my ADSL connection, and am using Netgear switches for my LAN (connected to the modem). What can go wrong and how can I investigate?

    Read the article

  • Turn my machine in a hotspot/proxy

    - by Leonardo
    My workplace does not provide a wifi... only wired connection... but my machine has a working wifi card... is there a way to "bridge" my wired connection, making my iphone connect to it and use it as if the own machine is being used? (the idea is to make my machine provide a wifi-connection and route it through my wired connection) Details: My machine OS is win 2012 server I have full admin rights to my machine There is a corporate-proxy PS: If more details needed pls ask!

    Read the article

  • linux routing issue

    - by Duc To
    Hi! I have 2 linksys routers which has linux running on it and using tomato firmware.. both has internet lines plugged on but only 1 acts as DHCP server (router 1) What I am having to achieve is that all packets goes to router 1 from internal IPs want to access internet will go out to that internet line but from 1 specific port, if router 1 detects packets from a specific source port (for ex: http port: 80), it will redirect that packet to router 2 and goes out to the internet from there.. I have found some documents which give solution that I will need a linux servers with 2 ethernet cards and then we plug both internet lines on that server and routing base on it but I do not want to do that because my boss does not want to have an extra work mantaining that server, besides, he says that the router itself already a linux one so why.. I tend to agree his points.. Can it be done or a seperate linux server acting as a router is a must? Thank you all in advance and really look forward in your replies.. I am newbie to linux network and it seems to be something out of my capacity to solve :( Your sincerely! Duc To

    Read the article

  • Client unable to access OWA website after temporarily changing SSL certificate on the server

    - by Lorenz Meyer
    I have the following issue: One client computer (Windows XP) cannot access the OWA website. All other client computers can (Except another one in the same remote office). How this happened: I temporarily changed the SSL certificate on the Exchange Server yesterday. After a few minutes, I reverted back, an now the same certificate that was installed for years is back again. During these few minutes, they were in OWA on this computer and got a certificate error. What exactly happens: Internet Explorer displays the error Internet Explorer cannot display the webpage, Firefox displays The connection was reset and Crome shows This webpage is not available. The connection to ... was interrupted. What I already did to try to get this working: Restart the client computer Restart the exchange server Deleted Internet Explorer browsing history In IE, Internet Options, tab Content, under Certificates deletes SSL cache Restored Internet Explorer to the default parameters I looked into certmgr.msc, but did not find a certificate related to the issue What could I do else to narrow down the origin of this problem (or better: resolve it) ? Can you give any advice ?

    Read the article

  • How could I resolve the following configuration on airport express?

    - by poz2k4444
    I've tried to configure my airport express in order to make a private network and also get access to internet, the thing is my linksys just has broken and all I have is the airport express, I've managed my DHCP to provide IP directions, but the internet connection is not working, is it something with the NAT?? or how can I access internet with my configuration, if the airport is reset to factory settings everything works fine, so, what is the problem?? My computer is going to be DHCP and DNS server

    Read the article

  • Object construction design

    - by James
    I recently started to use c# to interface with a database, and there was one part of the process that appeared odd to me. When creating a SqlCommand, the method I was lead to took the form: SqlCommand myCommand = new SqlCommand("Command String", myConnection); Coming from a Java background, I was expecting something more similar to SqlCommand myCommand = myConnection.createCommand("Command String"); I am asking, in terms of design, what is the difference between the two? The phrase "single responsibility" has been used to suggest that a connection should not be responsible for creating SqlCommands, but I would also say that, in my mind, the difference between the two is partly a mental one of the difference between a connection executing a command and a command acting on a connection, the latter of which seems less like what I have been lead to believe OOP should be. There is also a part of me wondering if the two should be completely separate, and should only come together in some sort of connection.execute(command) method. Can anyone help clear up these differences? Are any of these methods "more correct" than the others from an OO point of view? (P.S. the fact that c# is used is completely irrelevant. It just highlighted to me that different approaches were used)

    Read the article

< Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >