Search Results

Search found 12844 results on 514 pages for 'manual testing'.

Page 301/514 | < Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >

• Building uEFI bootable ISO and USB for Windows 7 deployment

  - by Darragh

  I have been trying to build up a window's 7 and 2k8 EFI deployment ISO or USB. But struggling to to even get an ISO to boot from even VMware Workstation EFI implementation. The problem is there is no clear requirement to what the EFI bootloader is looking for, "e.g EFI boot file" even ISO's and USB's that are bootable don't find the required .efi file. I'd like to know what is the process EFI bootloader follows to boot the EFI file. e.g; in a EFI windows system its; C:\Windows\Boot\EFI\bootmgfw.efi From DVD it's; F:\efi\microsoft\boot\cdboot.efi from what people tell me it's on USB; G:\efi\boot\bootx64.efi (bootmgfw.efi renamed) I've been testing on a HP notebook with EFI 2.0 and VMware Workstation 8.0 with .vmx file firmware = "efi"

  Read the article

• Wrong Sound Blaster's PCI ID within Windows

  - by pavian

  I own Sound Blaster X-Fi Titanium, it was working with no problems under Linux or Windows 7. It's original PCI ID is 1102:000b but now I see different within MS Windows. BIOS setup: 1102:000b GNU/Linux: 1102:000b Windows 7: 1102:000d Windows 8: 1102:000d In last days I'm experimenting with IOMMU PCI passthrough in Xen and I tried to pass this device to virtual Windows 7 and 8. Here I found this problem. I don't know if this is just coincidence or reason of my problem but it's wrong even in physical system. Windows detects 1102:000d as a High Definition Audio sound device (I guess this name, I have localized Windows, but this is general name, the same was with Realtek HDA before drivers), it's playing but it's unstable (Windows speaker testing can crash that application) and I can't install Creative software. Used driver is hdaudio.sys. Booting in BIOS or UEFI mode doesn't change anything. Nor CMOS clean. Someone met the same problem.

  Read the article

• Connection Reset by Peer error with Apache and JBoss 7.1.1

  - by vikingz

  We are seeing errors on some of our QA testing scripts that intermittently throw Connection Reset By Peer errors. The Test scripts submit requests via F5 which forwards requests to Apache (2.2.21) with a mod_jk load_balancer with the following setting for each worker in the worker.property worker1 props worker.worker1.type=ajp13 worker.worker1.port=8109 worker.worker1.lbfactor=1 worker.worker1.host=skunkhost1.com worker.worker1.connection_pool_timeout=30 and here is what is in the JBoss domain.xml for the AJP port from JBoss 7.1.1 <unbounded-queue-thread-pool name="SKUNKY.APP.AJP"> <max-threads count="300"/> <keepalive-time time="3" unit="minutes"/> </unbounded-queue-thread-pool> Here is httpd.conf Timeout 300 KeepAlive On KeepAliveTimeout 15 MaxKeepAliveRequests 100 TraceEnable Off My question is that is it posisbe that apache times out and closes the connection while jboss is still ready and working on the request? What might be causing the Connection Reset By Peer error?what am i missing here? Any help is majorly appreciated!! Sincerely KK

  Read the article

• Strange email coming from/to my computer

  - by Micah

  I'm running smtp4dev on my machine to trap anything going in/out of my computer on port 25 for testing purposes. Every so often this email gets trapped and I have no idea what it's from. I have Microsoft Security Essentials running on my machine and it hasn't identified and viruses or anything so I'm not sure what's going on. Here's the content of the message: Received: from [125.180.72.4] by 173.162.7.130 SMTP id O2Ncv62Ghig1vR for <[email protected]>; Fri, 24 Jun 2011 20:36:15 +0200 Received: from [125.180.72.4] by 173.162.7.130 SMTP id O2Ncv62Ghig1vR for <[email protected]>; Fri, 24 Jun 2011 20:36:15 +0200 Message-ID: <[email protected]> From: "" <[email protected]> To: <[email protected]> Subject: BC_173.162.7.130 Date: Fri, 24 Jun 11 20:36:15 GMT MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000D_01C2CC60.49F4EC70"

  Read the article

• How do I delete a differential backup?

  - by BlueMonkMN

  I often like to create backups when testing the software I work on, and will sometimes create a differential backup if I want to be able to get back to multiple previous states. However, sometimes I realize that I forgot one thing I wanted to include in a differential backup, or I no longer need a previous differential backup. Sometimes I simply want to create a new scenario from the original base image and start working with a new series of differential backups. So I'd like to be able to delete some older differential backups so I don't get confused about which ones I'm using. But I can't find any way to delete just the differential backups, selectively or all at once.

  Read the article

• Mantaining Wordpress website with subversion

  - by Geries

  I want to setup a website using wordpress, which we can modified locally and then via subversion commit the site and make it public. This means to installing new plugins, changing the content, testing updates of wordpress to see if they work with the theme, etc. The idea is to control the development on the site, in case we need to keep track of the dev or roll back, because of unexpected bugs in a the plugins, theme, etc. I've read this article in codex, however I'm not sure how this is done when, we want to include the content and changes on the options of worpdress and plugins (which is in the mysql). Thanks

  Read the article

• Looking for a free or open-source burner emulator [closed]

  - by Jared Harley

  Possible Duplicate: Virtual CDR driver I am looking for a free or open-source virtual CD/DVD emulator to run in a Windows environment. What I want is similar to what SlySoft's Virtual Clone Drive or Daemon Tools provides, but the emulated drive needs to be a burner of some type. The burner should be able to save disc images (.iso, .ccd, etc) to my harddrive - basically, the same as if I burned the files to a CD-R, and then ripped them back to a disc image. I have already looked around some and come across 2 - DVD neXt COPY iTurns and NoteBurner M4P. Both of these programs create a virtual CD-RW drive, but they are integrated into their product (for burning from iTunes to create mp3 files) and cannot create disc images. I am currently writing a piece of software that will have the capability to burn disc images onto CDs/DVDs, and I don't want to end up with a 100 coasters while I'm testing my software. Anyone have any ideas? Related ServerFault queston: Create netbook recovery image without DVD burner (virtual burner?)

  Read the article

• What is the harm in giving developers read access to application server application event logs?

  - by Jim Anderson

  I am a developer working on an ASP.NET application. The application writes logging messages to the Windows event log - a custom application log just for this application. However, I do not have any access to testing or staging web/application servers. I thought an admin could just give me read access to this event log to help in debugging problems (currently a service that is working in dev is not working in test environment and I have no idea why) but that is against my client's (I'm a consultant) policy. I feel silly to keep asking an admin to look at the event log for me. What is the harm in giving developers read access to application server application event logs? Is there a different method of application logging that sysadmins prefer programmers use? Surely, admins don't want to be fetching logging messages for developers all the time.

  Read the article

• Strange performance from RAID5 using WD RE4 disks

  - by Howard

  I've noticed a bit of a performance issue with some WD RE4 drives I'm using under AMD's hardware RAID solution. First a bit of background: Environment: Windows 7 home premium x64 HDD's: 3x 1TB WD Raid Edition 4 in a RAID 5 setup with 128 kbyte stripe (2TB usable space) Testing Tool: HD Tune, process set to "High Priority" Processor: AMD Phenom II x6 1100T Ram: 16GB DDR3/1600mhz Motherboard: MSI 970A-G45 The image below pretty much depicts the issue I'm having. Every test has the same thing, a period of similar length where the performance drops to a few megabytes a second. This can't be a TLER issue as the purpose of RE4's is to work around that. Any help would be greatly appreciated.

  Read the article

• periodically overridding NTP for simulation purposes

  - by Gerard

  I have this situation: NTP is used to sync time on a set of Windows 7 and Server 2008 machines. Nothing out of the ordinary about this. periodically on this system, the time needs to be changed for testing/training purposes (it is a training simulation system that has a lot of time-dependent operations). My question: As NTP in general does not really like big time jumps or changes AFAIK, is there a standard way this could be set up to allow the clock to be changed at the root NTP server in the system and have it propagate through the system in a reasonable amount of time (a minute or two?) It is not acceptable to disable and/or restart all NTP client services to achieve this. Any ideas? It would be nice to do this without writing some kind of custom script to disable services and update clocks all over the place. Thanks in advance.

  Read the article

• MySQL replicate multiple places

  - by Frederik Nielsen

  Very trick task to find a good title for this question, but here goes the q: I have a few development machines, where I develop my PHP applications on, and testing via a local webserver. This works out pretty well for each machine. However, I would like to replicate the DB from my machines to a central location. So, to sum up: DEV1 - CENTRAL DEV2 - CENTRAL DEV3 - CENTRAL CENTRAL - DEV1 CENTRAL - DEV2 CENTRAL - DEV3 I hope this makes sense, as I cannot find an easy way to tell it. Basically, it is a 2-way replication, where all 4 databases contain the same info, and each of them can be updated locally, to then be pushed out to the others. Is this actually doable? All my dev machines are running Windows 7, and my central DB server is running CentOS 6.

  Read the article

• Windows IIS test server setup

  - by chopps

  hello everyone, I picked up a new server to do some testing and need of a little help in setting up my environment at home. Here is what I would like to do: The test server will be used to test new code and configurations for a SaaS product. I would like from my laptop to enter www.acme.com and have it hit the server. The server is connected to a wireless router. I have windows server 2008 with IIS running on an an IP of 192.168.1.4. What is the best way to set this up? I want to hit the test server for www.acme.com and not go out to the internet. Do i need to mess with the LMHosts file? Thanks for the help. Im sure its easy but have never done this before.

  Read the article

• Monitoring bandwidth/latency/jitter between 2 sites?

  - by TheCleaner

  I have 2 sites connected via an MPLS network and I'd like to do the following: setup a host on each end that can "talk" back and forth between each other and somehow report/log what kind of throughput, jitter, latency, etc. they are experiencing between each other in 5 minute intervals. Something similar to Qcheck but that can be automated. Bottom line is I'm trying to determine if the WAN network is "stable" throughout the day or if something is wrong. We have video conferences between these sites and even at 1024kbps calls we are experiencing delays and jitter. I'm hoping to exonerate the network with some testing.

  Read the article

• Toshiba Satellite error 10053A0000 when re installing windows xp home on an existing windows 7 [closed]

  - by Jayapal Chandran

  I had installed windows 7 for testing. Now i want to re-install windows xp home original. I am using the toshiba installation(recovery) disk. The installation process asked a few questions. I selected the option to retain other partitions and to delete only c drive. In the next step i got this error. http://web1.toshiba.ca/support//techsupport/tsbs/all/-tsb001404.htm So, what should i do to retain my files in d drive and only allow the installation to delete c drive?

  Read the article

• Belkin router issue

  - by walr1

  Hi, My cousin and I bought a wireless Belkin router for testing purposes. Please keep in mind for all of our tests there is no ethernet cable plugged in, just the router's power cord. We have been trying to "flood" it with PING requests on its default address 192.168.2.1, but it isn't doing a thing; not even logging any attempts of too many requests. I've disabled the firewall, disabled PING request block, etc. Any idea why this thing isn't being affected? We sent 4 million packets and it hasn't done a thing. Quite odd! Thanks.

  Read the article

• Couldn't dual boot Vista and Centos 5.4

  - by jack sparrow

  Hi all, Today I have installed Centos 5.4 with dual boot with Vista. Everything was fine, but after testing Centos 5.4, when I tried to load Vista, it did not load. After selecting vista from grub menu, it shows the following message: rootnoverify (hd0, 1) chainloader +1 No bootmgr found I googled and try to fix the boot but failed, Then I restart my machine, boot with vista cd and in rescue option, restore my bootmgr by typing bootrec /fixmbr What happened after that, I can load at vista now, but no grub menu shows :P It seems the Centos went totally invisible. I am using dual booting Ubuntu 9.10 and vista in my laptop and its working fine and with no error from the beginning. But installed Centos for one of my project needs and I need it running asap. So I am feeling very helpless. Please help me anyone out there. I know there are many people knows how to fix it. Please help me.. Thanks in advance.

  Read the article

• MySQL on Windows - how do I set the wait_timeout for connections using named pipes?

  - by gustafc

  I use a MySQL database running on a Windows box, and for performance reasons I'm connecting to it using named pipes. The (Java) application using the database (through Hibernate) can let the connection lie idle for quite a long time, which causes the connection to fail with the following message: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: The last packet successfully received from the server was 33 558 297 milliseconds ago. The last packet sent successfully to the server was 33 558 297 milliseconds ago. is longer than the server configured value of 'wait_timeout'. You should consider either expiring and/or testing connection validity before use in your application, increasing the server configured values for client timeouts, or using the Connector/J connection property 'autoReconnect=true' to avoid this problem. autoReconnect unfortunately has no effect (and neither does autoReconnectForPools), but the wait_timeout docs state that wait_timeout only applies "to TCP/IP and Unix socket file connections, not to connections made via named pipes, or shared memory". How can I change the wait_timeout for named pipes?

  Read the article

• chmod -R 777 /. - RHEL 5.5

  - by user1263746

  A shell script testing went bad and it issued chmod -R 777 /. to the system, instead of chmod -R 777 ./ and as expected it wiped the critical meta data. We have turned off the system and it will not function properly the next time it is turned on. I am told that rpm --setperms -a rpm --setugids -a should atleast fix the permission of the packages maintained by rpm. Is it worth doing? And is there any script available which will copy the permission from an identical system? To atleast get the box working. The Box is running RHEL5.5 Thanks!

  Read the article

• Most suitable high availability solution

  - by Alex Bagnolini

  My company is hosting a website in a server with IIS, SQL Server and a 3rd party windows service (written in C#, source code available for amendments). We bought a new identical server, composed by: 1x Quad Core, 12GB RAM, 4x160GB SATA Raid 5, Windows Server 2008 R2 Datacenter, Public IP. We aim to put all webpages and the 3rd party windows service in an high-availability state. After some lab-testing on how to configure Failover Clustering and Hyper-V, we have deep doubts on what the "best" solution would be, by "best" meaning maintainable and able to correctly handle a physical server failure. Any suggestion on how we should configure the two servers? We don't need all the configuration's step, just an hint on the right direction to follow.

  Read the article

• Keepalived takes several minutes to recover in a particular situation

  - by NathanE

  I've setup Keepalived for a master-slave style virtual IP and it seems to work well. Both are hosted in almost identical VMs. If I "pause" the VM that is running the Master. The Slave will take over, as expected, almost instantly. However if I then "unpause" the VM that runs the Master. The virtual IP will stop responding the pings. And it takes a good 4 or 5 minutes for it to start pinging again. It seems to be getting desynchronised due to the nature of the way I'm testing it (by pausing/unpausing the VMs). I admit that pausing and unpausing VMs is a slightly dodgy way to test this. But it has raised a concern for me that there could be other scenarios that cause the same undesirable behaviour. Is this expected / by design? Is there anything I can do to the config to improve it? Thanks.

  Read the article

• How to determine which source files are required for an Eclipse run configuration

  - by isme

  When writing code in an Eclipse project, I'm usually quite messy and undisciplined in how I create and organize my classes, at least in the early hacky and experimental stages. In particular, I create more than one class with a main method for testing different ideas that share most of the same classes. If I come up with something like a useful app, I can export it to a runnable jar so I can share it with friends. But this simply packs up the whole project, which can become several megabytes big if I'm relying on large library such as httpclient. Also, if I decide to refactor my lump of code into several projects once I work out what works, and I can't remember which source files are used in a particular run configuration, all I can do it copy the main class to a new project and then keep copying missing types till the new project compiles. Is there a way in Eclipse to determine which classes are actually used in a particular run configuration?

  Read the article

• How do I unmount a tmpfs that is missing from /etc/mtab?

  - by vrinek

  I have the following line in /etc/fstab: none /home/hydra/tmp tmpfs user,noauto,size=1000M,uid=1001,gid=1001 0 0 I can do mount ~/tmp as user hydra and it gets mounted ok. The only problem is that even thought it gets added to /proc/mounts, it does not get added to /etc/mtab. When I try a umount ~/tmp (again as hydra) it complains: umount: /home/hydra/tmp is not mounted (according to mtab) And when I try -f or -n, it complains that I am not root. Some more info on the system that manifests this problem: On sudo umount /home/hydra/tmp, the fs gets unmounted (I think I needed to used -f too) Debian version is testing mount --version - mount from util-linux 2.19.1 (with libblkid and selinux support) ls -l /etc/mtab - -rw-r--r-- 1 root root 921 Nov 14 09:08 /etc/mtab cat /proc/mounts | grep rootfs - rootfs / rootfs rw 0 0 /home, /home/hydra nor /home/hydra/tmp are symbolic links

  Read the article

• PowerShell Remoting: No credentials are available in the security package

  - by TheSciz

  I'm trying to use the following script: $password = ConvertTo-SecureString "xxxx" -AsPlainText -Force $cred = New-Object System.Management.Automation.PSCredential("domain\Administrator", $password) $session = New-PSSession 192.168.xxx.xxx -Credential $cred Invoke-Command -Session $session -ScriptBlock { New-Cluster -Name "ClusterTest" -Node HOSTNAME } To remotely create a cluster (it's for testing purposes) on a Windows Server 2012 VM. I'm getting the following error: An error occurred while performing the operation. An error occurred while creating the cluster 'ClusterTest'. An error occurred creating cluster 'ClusterTest'. No credentials are available in the security package + CategoryInfo : NotSpecified: (:) [New-Cluster], ClusterCmdletException + FullyQualifiedErrorId : New-Cluster,Microsoft.FailoverClusters.PowerShell.NewClusterCommand All of my other remote commands (installing/making changes to DNS, DHCP, NPAS, GP, etc) work without an issue. Why is this one any different? The only difference is in the -ScriptBlock tag. Help!

  Read the article

• replace windows xp with ubuntu no usb boot option and no cd?

  - by kristian nissen

  I have an old laptop running windows xp, I want to replace it with the latest version of ubuntu. The problem is that the laptop does not support boot from usb - I checked the BIOS but the option is not working, I tried http://www.pendrivelinux.com/testing-your-system-for-usb-boot-compatibility/ but with no luck. I also tried burning the iso on a dvd but the burn process keeps failing. What options do I have? Isn't it possible to install ubuntu somehow by downloading it and replacing it with the current OS?

  Read the article

• Outlook 2010 + Move IMAP PST file = Outlook data file cannot be accessed.

  - by GWB

  I set up a new IMAP account in Outlook 2010. It works but creates IMAP PST file in C:\Users\User\AppData\Local\Microsoft\Outlook. I want the file on my data drive in D:\Users\User\Documents\Outlook Files (the same folder where outlook automatically creates the local Outlook PST. I followed the instructions here to move the IMAP PST. Testing the account (send/receive) works fine, but if I try to manually send an email I get error 0x8004010F Outlook data file cannot be accessed. I've tried repairing the PST using SCANPST (it always finds errors), and deleting and recreating the account but I get the same error. If I move the PST file back, it works again, but this is not ideal. Note: I don't think this is a duplicate of this question as the cause is different and the solution does not help.

  Read the article

< Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >