Search Results

Search found 9015 results on 361 pages for 'wireless range'.

Page 301/361 | < Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >

• How to fix massive lag on ZyXEL HomePlug AV powerline adapters?

  - by Tim Abell

  I have 3 ZyXEL Homeplug AV powerline adapters as per the one in the review below. I have two plugged in currently, one into my Be / Thompson wireless router, and one into my desktop pc (box1). every now and then the link indicator on the adapters (the mains link, not the ethernet link) goes nutty, and performance falls off a cliff (see below). http://www.gadgetspeak.com/gadget/article.rhtm/753/479266/ZyXEL_PowerLine_HomePlug_AV_PLA401.html 64 bytes from box1 (192.168.1.101): icmp_seq=1064 ttl=64 time=996 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1065 ttl=64 time=549 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1066 ttl=64 time=6.15 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1067 ttl=64 time=1400 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1068 ttl=64 time=812 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1069 ttl=64 time=11.1 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1070 ttl=64 time=1185 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1071 ttl=64 time=501 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1072 ttl=64 time=1975 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1073 ttl=64 time=970 ms ^C --- box1 ping statistics --- 1074 packets transmitted, 394 received, +487 errors, 63% packet loss, time 1082497ms rtt min/avg/max/mdev = 5.945/598.452/3526.454/639.768 ms, pipe 4 Any idea how to diagnose/fix? I'm on linux so installing the windoze software that came with them is not something I'm terribly keen to do.

  Read the article

• Add IPv6 support to DirectAdmin server

  - by George Boot

  I just set up an new DirectAdmin, and I want to prepare it for IPv6 use. My ISP have gave me an range of IPv6 addresses that I can use. Lets say that address is 2a01:7c8:**:1f::. My neworkadapter user DHCP to resolves its IP-addresses. When i type ifoncig eth0 I get the following result: eth0 Link encap:Ethernet HWaddr 52:**:**:**:ce:f3 inet addr:37.**.**.44 Bcast:37.**.**.255 Mask:255.255.255.0 inet6 addr: 2a01:7c8:****:1f::/64 Scope:Global inet6 addr: fe80::5054:ff:fe87:cef3/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:38941 errors:0 dropped:0 overruns:0 frame:0 TX packets:29439 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3779534 (3.6 MiB) TX bytes:5089379 (4.8 MiB) As you can see, I have an IPv6 address set, but I can't ping6 an IPv6 host. I get the error: connect: Network is unreachable. I decided that I needed an gateway, so I tryed to add one: ip -6 route add default via 2a01:7c8:****::1 dev eth0 (2a01:7c8:**::1 is the gateway of my ISP). But it trows an error: RTNETLINK answers: No route to host. Does somebody know what to do, and how to solve this issue? Thanks a lot!

  Read the article

• How to get a new-pssession in PowerShell to talk to my ICS-connected laptop for Remoting

  - by Scott Bilas

  If I have my laptop on the LAN, then Powershell remoting works fine from my workstation to the laptop. However, the LAN is wireless, and so sometimes I will connect on a wire to my workstation. It has two ethernet ports so I have the secondary wired up to share to the laptop using Win7's Internet Connection Sharing. (Btw I know that avoiding ICS would solve the problem, but that's not an option right now.) So my question is: what magic registry bits or command line options do I need to flip to get remoting to work to my laptop through ICS? Here's what happens when I try it: new-pssession -computername 192.168.137.161 [192.168.137.161] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Default authentication may be used with an IP address under the following conditions: the transport is HTTPS or the destination is in the TrustedHosts list, and explicit credentials are provided. Use winrm.cmd to configure TrustedHosts. Note that computers in the TrustedHosts list might not be authenticated. For more information on how to set TrustedHosts run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException + FullyQualifiedErrorId : PSSessionOpenFailed I'm having a hard time understanding the documentation for PowerShell and WinRM. I've tried messing with allowing ports in the firewall and setting TrustedHosts to * on my workstation (don't think this is a good idea on the laptop). I have no idea where to go from here, would appreciate any help.

  Read the article

• Single computer on network cannot connect to internet.

  - by user34630

  Hi All, I hope you can help me out! :) I have 3 computers and one device (Xbox) on my home network; 2 running XP and one on Vista. The computer that can't connect to the internet (XP) is old and failing, and shows no warning before it completely runs out of battery. Thus today, I started it up forgetting that I had unplugged it the night before, and it just ran out of battery entirely whilst I was using it and died. I think that before this I had been browsing the internet, but I can't remember for certain. (i.e. The problem I am having may or may not have been caused by this 'hard' power off). Anyway, now when I start the computer up it takes 5-10 minutes after logging on to display the start bar and icons. Also, I cannot browse the internet. The computer seems to connect to the network OK (I have tried both wired and wireless), but I can't visit sites and can't ping web addresses. Pinging the router fails, as does pinging another of my computers on the network. I have never encountered something like this before, and whilst I am no noob I am also not a sysadmin, haha. :( Any help is greatly appreciated, thank you for your time. P.S. I have tried a system restore (newbie move?).

  Read the article

• How do hdparm's -S and -B options interact?

  - by user697683

  These two options seem confusing. For example: according to the man page -B 254 "does not permit spin-down". However, testing with -B 254 -S 1 the drive does spin down after 5 seconds. -B Query/set Advanced Power Management feature, if the drive supports it. A low value means aggressive power management and a high value means better performance. Possible settings range from values 1 through 127 (which permit spin-down), and values 128 through 254 (which do not permit spin-down). The highest degree of power management is attained with a setting of 1, and the highest I/O performance with a setting of 254. A value of 255 tells hdparm to disable Advanced Power Management altogether on the drive (not all drives support disabling it, but most do). -S Put the drive into idle (low-power) mode, and also set the standby (spindown) timeout for the drive. This timeout value is used by the drive to determine how long to wait (with no disk activity) before turning off the spindle motor to save power. Under such circumstances, the drive may take as long as 30 seconds to respond to a subsequent disk access, though most drives are much quicker. The encoding of the timeout value is somewhat peculiar. A value of zero means "timeouts are disabled": the device will not automatically enter standby mode. Values from 1 to 240 specify multiples of 5 seconds, yielding timeouts from 5 seconds to 20 minutes. Values from 241 to 251 specify from 1 to 11 units of 30 minutes, yielding timeouts from 30 minutes to 5.5 hours. A value of 252 signifies a timeout of 21 minutes. A value of 253 sets a vendor-defined timeout period between 8 and 12 hours, and the value 254 is reserved. 255 is interpreted as 21 minutes plus 15 seconds. Note that some older drives may have very different interpretations of these values.

  Read the article

• Mac OS X - configuring ntpd server with on LAN with D-Link DIR-655

  - by Mark C

  Hey all, This question is pretty specific, but I hope someone will have seen this error elsewhere. I a configuring a machine running OS X 10.5.8 to be an NTP server for machines connected to a LAN that is not connected to the Internet. I am not too worried about knowing the "right" time on all the machines, but rather worried about making sure everyone has the same notion of time. I configured the NTP daemon on Mac by turning on the Set date and time automatically in System Preferences, using the server's clock, 127.127.1.0 as the reference clock. I figured I should see if the server can NTP query itself before proceeding to the clients. The weird part is when I run the ntpq -p command in a command-prompt when connected to my D-Link DIR-655 (firmware: 1.33), it hangs for about a minute or so each time before finally giving me some output. I thought the problem might have to do with Port Forwarding, so I configured the router to forward port 123 for the IP of the server, but that did not improve the situation. When I run the ntpq -p command on my school's network, on a Linksys WRT54G router, or with the wireless Airport card turned off - I have absolutely no problems - the command returns a response instantly. Is this normal? I can see why a query might take a minute or so, but I don't understand why one router does it faster than the other. I tried messing around with the ntp.conf file adding the burst, minpoll, and maxpoll options: server 127.127.1.0 burst minpoll 4 maxpoll 5 Figuring that perhaps I am polling too often and the configuration file is slowing me down, but even with this, the ntpq still hangs on the D-Link DIR-655, but does just fine on the other routers. Any thoughts on where the lag is coming from or if the lag is even a problem?

  Read the article

• What is the point of PPPoE?

  - by aaa90210

  I am trying to expand my knowledge of networking beyond the basics. I have started reading about PPP, and how it is used in DSL modems with PPPoE and PPPoA. My first impression of PPP was "well that seems pretty similar to Ethernet". They are both data link layer protocols. They both have fields to identify the encapsulated protocol (e.g. IP). They both have related protocols to assign IP addresses (DHCP and NCP). So my first question was "so what's the point of PPP, why not just use Ethernet?". The answer to that was fairly straightforward - Ethernet is not supported over a wide range of media like serial lines, and is a fairly specific technology to LAN's using CAT5 or similar. HOWEVER - then I was reading about PPPoE, and the obvious thought was "well if we are doing something over Ethernet, then Ethernet must be available and in use, so why not just use it?". In other words, PPPoE seems to be encapsulating one data-link layer protocol in another very similar protocol. Why do IP-inside-PPP-inside-Ethernet when we could just be doing IP-inside-Ethernet, and use DHCP rather than NCP to assign the IP address to the home router? Thanks

  Read the article

• Painfully slow login to AD bound Mac OS X Leopard machine when off home network

  - by GeeBee

  Dear all Just looking for a little help with this problem that seems to trip a lot of people up and is causing me no end of grief. I have a number of fully patched OS X Leopard machines that are bound to my AD (Server 2003). When on the home network, logging in seems swift and works as expected. When users take the machines off site, login can take 5 minutes or more. The user adds correct credentials but the desktop does not appear for a very long time. Outside the office, I have tried logging in using a local Admin account, switching off Airport and then logging in using an AD account. In this situation login is immediate again. It all seems as if Leopard is finding a suitable wireless network, spending far too long looking for the Domain before eventually giving up and using the cached credentials instead. I have read that disabling Bonjour on the machine will stop this problem (i have not yet tested) http://www.macwindows.com/leopardAD.html#111607z ...but I am reluctant to use this "Solution" as I would like to be able to use Bonjour on the local network as well as having AD-bound machines. However, is disabling Bonjour really the only answer? Is there not some time-out setting somewhere that could be amended to stop Leopard spending forever looking for home? Any help would be very gratefully received Thanks Gordon

  Read the article

• One Active Directory, Multiple Remote Desktop Services (Server 2012 solution)

  - by Trinitrotoluene

  What I am trying to do is quite complex, so I figured I'd throw it out to a wider audience to see if anyone can find a flaw. What I am trying to do (as an MSP/VAR) is design a solution that will give multiple companies a session based remote desktop (companies that need to be kept completely seperate), using only a handful of servers. This is how I imagine it at the moment: CORE SERVER - Server 2012 Datacentre (All below are HyperV servers) Server1: Cloud-DC01 (Active Directory Domain Services for mycloud.local) Server2: Cloud-EX01 (Exchange Server 2010 running multi tenant mode) Server3: Cloud-SG01 (Remote Desktop Gateway) CORE SERVER 2 - Server 2012 Datacentre (All below are HyperV servers) Server1: Cloud-DC02 (Active Directory Domain Services for mycloud.local) Server2: Cloud-TS01 (Remote Desktop Session Host for Company A) Server3: Cloud-TS02 (Remote Desktop Session Host for Company B) Server4: Cloud-TS03 (Remote Desktop Session Host for Company C) What I thought about doing was setting up each Organisation in their own OU (perhaps creating their OU structure based on the Excahnge 2010 tenant OU structure so the accounts are linked). Each company would get a Remote Desktop Session Host server that would also serve as a file server. This server would be seperated from the rest on its own range. The server Cloud-SG01 would have access to all these networks and route the traffic to the appropriate network when a client connects and authenticated so they are pushed onto the correct server (Based on session collections in 2012). I won't lie this is something I have come up with quite quickly so there may well be something gapingly obvious that I am missing. Any feedback would be appreciated.

  Read the article

• Xmodmap fails to remap modifier keys

  - by ZyX

  When I try to move keys, so that I have CapsLock on escape, Control on CapsLock and Escape on left control, I get the following error: % xmodmap ~/.Xmodmap X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 118 (X_SetModifierMapping) Value in failed request: 0x17 Serial number of failed request: 15 Current serial number in output stream: 15 That is the code that fails: remove Lock = Caps_Lock ! ESC keycode 9 = Caps_Lock add Lock = Caps_Lock remove Control = Control_L ! CapsLock keycode 66 = Control_L add control = Control_L ! Control_R keycode 37 = Escape ! 2*Meta_L keycode 148 = Meta_L add mod1 = Meta_L If I comment out all lines that start with either add or remove it runs without any errors, but does not do what I want. Program versions (Gentoo x86 (stable)): xorg-server-1.7.6 xmodmap-1.0.4 xf86-input-evdev-2.3.2 Xorg.conf: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Evdev Keyboard" "CoreKeyboard" InputDevice "Evdev Mouse" "CorePointer" EndSection Section "Module" Disable "dri" Disable "dri2" Disable "record" EndSection Section "InputDevice" Identifier "Evdev Keyboard" Driver "evdev" Option "Device" "/dev/input/event2" Option "CoreKeyboard" Option "AutoRepeat" "500 25" Option "XkbRules" "xorg" Option "xkb_rules" "xorg" Option "XkbModel" "yahoo" Option "xkb_model" "yahoo" Option "XkbLayout" "dvp2" # ,ru2 Option "xkb_layout" "dvp2" # ,ru2 # Option "XkbVariant" "" # ,winkeys Option "XkbOption" "grp_led:scroll,grp:rctrl_toggle,compose:rwin,grp:lwin_switch" # grp:lwin_switch EndSection Section "InputDevice" Identifier "Evdev Mouse" Driver "evdev" Option "CorePointer" Option "Device" "/dev/input/event3" Option "Name" "Genius Ergo Mouse" Option "HWHEELRelativeAxisButtons" "7 6" Option "WHEELRelativeAxizButtons" "4 5" Option "SendCoreEvents" "true" Option "Buttons" "11" EndSection Section "Files" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/terminus" # FontPath "/usr/share/fonts/intlfonts" FontPath "/usr/share/fonts/ttf-bitstream-vera" # FontPath "/usr/share/fonts/ttf" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/paratype" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Section "ServerFlags" # Option "XkbDisable" "false" # Option "AutoAddDevices" "false" Option "DontVTSwitch" "false" Option "DontZap" "false" # Option "DontZoom" "true" EndSection Everything worked before update.

  Read the article

• Linux DHCPD Mac-Address based Groups

  - by GruffTech

  Our Current DHCPD.conf looks like the following. subnet 10.0.32.0 netmask 255.255.255.0 { range 10.0.32.100 10.0.32.254; option subnet-mask 255.255.255.0; option broadcast-address 10.0.32.255; option domain-name-servers 208.67.222.222,208.67.220.220; option routers 10.0.32.5; host Dev-ABaird-W { hardware ethernet 00:1D:09:3E:49:13; fixed-address 10.0.32.94; } ... more static hosts .... } About as basic as it gets. The old router is 10.0.32.1, our company wanted to implement a squid proxy to better monitor web traffic while at work, and if necessary block large time-wasters, IE Facebook.com. However, we've quickly realized that this change has played a mean prank on our Polycom SIP Phones. Occasionally our phones will not ring, the end recipient hears ringing (this is artificially created by our PBX) however the handset never rings. The ONLY thing that has changed in our network is the option routers line. So, Since all Polycom MAC addresses begin with 00:04:F2 would it be possible in DHCP to say any 00:04:F2:::* MAC addresses get option routers 10.0.32.1, and anything else must talk with our Gateway?

  Read the article

• Serving and caching content from Amazon S3 with Tomcat

  - by Rob

  Hi all, We're looking to serve a range of content using Amazon S3 as a store for the content and Tomcat to host the web application. The content is divided into free and paid for content. We intend to authenticate the users when they access the web application running in Tomcat. Based around their authentication we are able to tell if the user has access to paid for content or simply free stuff. So I envision the flow of a request being something like this: Authenticated request to Tomcat If user is "paid" user, display links to premium content Direct requests for paid content back through Tomcat to prevent direct access to it by non-paying users. Tomcat makes request to S3 through a web cache to keep our costs down Content is returned to user. As we have to pay for each request to S3, I'd ideally like to cache content locally to the Tomcat instance after it has been requested for the first time to keep costs to a minimum and to speed things up. I would also like to be able to invalidate this cache if we publish fresh content to S3. So to confirm my proposal: Client Request - Tomcat - Web Cache - S3 To invalidate the cache, I was thinking of using something like PubSubHubbub with the cache waiting for updates to the feed for content that it should invalidate. I'd appreciate some general feedback on this approach as I've no real experience of caching and I'm sure I've made some invalid assumptions. I'd also appreciate any recommendations for caching technologies. Thanks.

  Read the article

• Why can't I route to some sites from my MacBook Pro that I can see from my iPad? [closed]

  - by Robert Atkins

  I am on M1 Cable (residential) broadband in Singapore. I have an intermittent problem routing to some sites from my MacBook Pro—often Google-related sites (arduino.googlecode.com and ajax.googleapis.com right now, but sometimes even gmail.com.) This prevents StackExchange chat from working, for instance. Funny thing is, my iPad can route to those sites and they're on the same wireless network! I can ping the sites, but not traceroute to them which I find odd. That I can get through via the iPad implies the problem is with the MBP. In any case, calling M1 support is... not helpful. I get the same behaviour when I bypass the Airport Express entirely and plug the MBP directly into the cable modem. Can anybody explain a) how this is even possible and b) how to fix it? mella:~ ratkins$ ping ajax.googleapis.com PING googleapis.l.google.com (209.85.132.95): 56 data bytes 64 bytes from 209.85.132.95: icmp_seq=0 ttl=50 time=11.488 ms 64 bytes from 209.85.132.95: icmp_seq=1 ttl=53 time=13.012 ms 64 bytes from 209.85.132.95: icmp_seq=2 ttl=53 time=13.048 ms ^C --- googleapis.l.google.com ping statistics --- 3 packets transmitted, 3 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 11.488/12.516/13.048/0.727 ms mella:~ ratkins$ traceroute ajax.googleapis.com traceroute to googleapis.l.google.com (209.85.132.95), 64 hops max, 52 byte packets traceroute: sendto: No route to host 1 traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 *traceroute: sendto: No route to host traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 ^C mella:~ ratkins$ The traceroute from the iPad goes (and I'm copying this by hand): 10.0.1.1 119.56.34.1 172.20.8.222 172.31.253.11 202.65.245.1 202.65.245.142 209.85.243.156 72.14.233.145 209.85.132.82 From the MBP, I can't traceroute to any of the IPs from 172.20.8.222 onwards. [For extra flavour, not being able to access the above appears to stop me logging in to Server Fault via OpenID and formatting the above traceroutes correctly. Anyone with sufficient rep here to do so, I'd be much obliged.]

  Read the article

• GA 8KNXP Rev1.0: 4 GB installed, only 3.5 GB recognized by BIOS

  - by hurikhan77

  I've installed 2x 1 GB and 4x 512 MB memory into my GA-8KNXP system which would sum up to 4 GB. The specification from the manual says: Maximum memory support: 4 GB. If all six slots are utilized, slot 5+6 may only equipped with single-sided RAM modules. And so I did. Anyway: The BIOS counts up to 3.5 GB and finishes there. Also my Linux system reports only 3.5 GB of memory although 4 GB memory support is activated in the kernel. So I suppose this is a memory mapping issue or a hardware issue. I've tried removing only on of the 512 MB memory modules leaving 5 modules in place. But that just stopped the system from powering on correctly (screen stays black although fans and leds come to live). Dual Channel was detected and enabled so the system technically found all 6 modules. "dmidecode" in Linux reports only memory in slots 1 to 4 and ignores slots 5+6, so it only detects 3 GB of memory. It also says the system would support up to 16 GB of memory with 4 GB modules per slot. I think technically the chipset should be able to offer and utilize the complete 4 GB memory range. Any clues what else I could check? Or do I have just to live with 0.5 GB wasted memory?

  Read the article

• VirtualBox communication from Linux to/from Windows 7

  - by J. Otto Tennant

  VirtualBox is running in Windows 7 as the host. VirtualBox has the two modifications (one is called Guest Additions; don't remember the other). The Virtual machine has "bridged" networking selected. I have SAMBA set up (now, the problem may be here; it has been three or four years since I last did this) on the Linux guest machine. Neither guest nor host sees the other. From the Windows 7 command prompt, the IP address of the Linux guest pings. The IP address of another computer (a separate Windows 7 on the wireless network) pings from the Linux guest. (I have no idea what IP address the Windows 7 host itself has. The output of "netstat" does not seem to be useful.) So, it seem to me that something should be working. The only workgroup on the LAN is inventively named WORKGROUP. SMB4K should be seeing something. There must be a simple setup step that I am missing. (FWIW, there are two processes running smbd, and no process is running nmbd. YaST says that nmbd is set to run. I am not sure what this means.)

  Read the article

• Can I autoregister my clients/servers in local DNS?

  - by Christian Wattengård

  Right now I have a W2k12 server at home that I run as a domain controller. This has the extra benefit of registering every "subordinate" computers name in it's DNS so that I don't have to go around remembering IP's all the time. (And it let's me easily run dhcp also on my servers). I need to rework my home network for several odd reasons, and in this new scenario there is no place for a big honking W2k12 server box. I have a RasPI, and I have other smallish linux boxen I can use. (In a worst case scenario I'll use my NUC, but then I'll be forced to use my home cinema's UPnP-client for media... The HORROR!!) Is it possible to set up a DNS-server-"appliance" that somehow autoregisters it's own hostname.. Scenario: Router (N66u) on 172.20.20.1. Runs DHCP on 172.20.20.100-200 range. Server [verdant] of a *nix flavor on 172.20.20.2 Laptop [speedy] of W8 flavor on DHCP assigned Laptop [canary] of W8 flavor on DHCP assigned Desktop [lianyu] of Ubunto flavor on DHCP assigned What I would like is that all of the above servers (except possibly the router) would be available on verdant.starling.lan and canary.starling.lan and so on. This is how it works right now (except the Ubuntu box... I haven't cracked that one yet) because Windows just does this for you.. I would also be able to do this without any manual labor on the server. When I tell my box it's name is smoak it should "immediately" be available as smoak.starling.lan without any extra configuration on my part. How can I do this in a Linux (Ubuntu) environment? (Bonus comment upvote for naming the naming scheme :P )

  Read the article

• Problem IIS 7.0 Locking files durring upload

  - by viscious

  I am running a server 2008 with iis7 and the ftp addon on to iis 7.0 I have the ftp site configured and mostly working Except that about 70% of the time when transferring a file the upload will hang forever. If I disconnect the ftp client and reconnect and try to upload the same file I will get an error on the client saying the file is locked. I have to restart the ftp service to clear the lock. I fired up process explorer and did a search on the file in question and sure enough the ftp service has a lock on the file and it takes around 20 minutes to release the lock on its own (and sometimes longer). This lock stays around even after I disconnect the client. Like I said this only happens about 70% of the time, the other 30% of the time it goes through just fine. Things i have verified. -Not a firewall issue. Server is using passive port range 8000-9000 which is allowed on the firewall. -Not a nat issue, server has a globally rout-able ip address -all recommended/required updates installed I have 5 other servers in a very similar configuration and this is the only one i have problems with.

  Read the article

• Test server on a local network with XAMPP

  - by hopscotch1978

  Hi, I'm not very proficient with networks and could use some help. I've got a Win 7 desktop with XAMPP which acts as my local dev machine. I've configured a virtual host on the desktop which I'm able to access fine. If I'm understanding things correctly, the virtual host uses port 80 (<VirtualHost 127.0.0.1:80>). I've just tried to configure a separate Win XP laptop on the local wireless network to connect to the main desktop for testing purposes. I've added the IP address and virtual host name to my Hosts file on the laptop. My virtual host is imaginatively named "virtualhost1". When I type this into my laptop browser, it connects correctly to the main desktop and I get the XAMPP welcome screen. But I can't seem to get to the actual site, just the XAMPP welcome screen. It kind of jumps the browser to http://virtualhost1/xampp/. I think it's a port issue of some sort but I have no idea how to resolve it. I would get the same XAMPP welcome screen on my desktop if I omitted ":80" from the virtual host declaration. On my main desktop, typing "virtualhost1" to the browser address bar gives me the site correctly, not the XAMPP welcome screen. Help would be appreciated. Thank you.

  Read the article

• Valid IP address but can't surf without rebooting

  - by Kat

  I periodically lose internet and router connection at home. When this happens, others are using the router just fine. I am connecting directly through a wired connection to a Belkin router. I can release and renew the IP (and the IP addresses change to 0.0.0.0 and to an IP in my router's range beginning with 192.168.2. as they should) but still can't surf, can't access the router interface. Cycling the router doesn't help, and again, others are able to access the router fine at this time. Only rebooting the computer resolves the issue, and everything is wonderful for a few hours- and then I lose connection again. I have several ideas where to go from here, but I'd like to get some advice first. (Using Windows XP SP3, hardwired connection) Update As stated in the originally, releasing and renewing doesn't solve the issue. However, I have an update. I can ping localhost and my router IP with no problem at all when the issue occurs. However, repairing the network connection does not help. I AM able to get back on by disabling and then re-enabling the network connection in XP. What does that tell us?

  Read the article

• Cable management techniques

  - by cornjuliox

  How do you manage the giant jungle of cables behind your PC? When you have 2 or more PCs next to each other, you wind up with this giant mess cables that's a pain in the neck to clean especially when both computers are running 24/7 and any fidgeting with the cables is likely to cause data loss and/or angry users. So far I've tried masking tape, cable ties and plain old string but none have been very effective. The masking tape kept the cables in place, but over time they ended up leaving this awful sticky residue on the sides of the cables that just won't come off gets all over your fingers and is horrible horrible horrible. I have nightmares about that stuff. We used cable ties and 'folded' up some of the longer cables so that they weren't any longer than they needed to be, but this meant that the position of some of our devices like the keyboard and the mouse were essentially 'fixed' until we removed the ties. The string didn't work much differently and required that we tie them properly or risk it coming loose. I would switch to a wireless keyboard and mouse, but I don't want to have to deal with the added expense of batteries, even the rechargable ones. Plus I don't want them to die on me at a crucial moment (happened to me once while playing Firearms _<). How do large offices and data centers manage their masses of cable?

  Read the article

• Cable management techniques

  - by cornjuliox

  How do you manage the giant jungle of cables behind your PC? When you have 2 or more PCs next to each other, you wind up with this giant mess cables that's a pain in the neck to clean especially when both computers are running 24/7 and any fidgeting with the cables is likely to cause data loss and/or angry users. So far I've tried masking tape, cable ties and plain old string but none have been very effective. The masking tape kept the cables in place, but over time they ended up leaving this awful sticky residue on the sides of the cables that just won't come off gets all over your fingers and is horrible horrible horrible. I have nightmares about that stuff. We used cable ties and 'folded' up some of the longer cables so that they weren't any longer than they needed to be, but this meant that the position of some of our devices like the keyboard and the mouse were essentially 'fixed' until we removed the ties. The string didn't work much differently and required that we tie them properly or risk it coming loose. I would switch to a wireless keyboard and mouse, but I don't want to have to deal with the added expense of batteries, even the rechargable ones. Plus I don't want them to die on me at a crucial moment (happened to me once while playing Firearms _<). I know that there are people out there with home/office networks a thousand times more convoluted than mine, so

  Read the article

• Diagnosing PCI issues

  - by dtsazza

  I'm upgrading a PC for a friend, and have run into a problem with upgrading the motherboard. I've been assembling custom PCs for the best part of a decade now, so I'm happy enough with the basics at the very least. The motherboard, CPU and graphics card were all updated at once - after this was done, the machine POSTs but the PCI wireless card, as well as the PCI-E graphics card, do not seem to be recognised at all by the system. No trace of them anywhere in the BIOS, or the POST output, or in Windows. I booted into Linux and ran an lspci which also showed up no sign of them. What is the best step to go about diagnosing this? Is it likely/feasible that the motherboard's PCI bus is just defective and it needs to be RMAed? Are there any other common gotchas that might cause these symptoms? For reference, the components in question are: CPU: Celeron E1400 Motherboard: Gigabyte GA-G31M-ES2L Graphics card: TBC (a low end card from a couple of years ago; worked flawlessly before the mobo change) PCI WNIC: Edimax 7128G Thanks in advance for any help.

  Read the article

• RRAS with DHCP when the IP pool is on a different subnet

  - by John B

  I run a small business network and the last couple of days I have been setting up some equipment to add VPN capabilities to our network. I've got the following set up: Windows 2008 R2 with RRAS - 172.22.200.50 Cisco RV082 router - 172.22.100.1 / 172.22.200.1 The Cisco router only support DHCP on a single class C network; 172.22.100.0/24. On the Cisco router I have set up an additional subnet; 172.22.200.0/24. The DHCP range is 172.22.100.200-254 When a PPTP connection comes in to the router, it is forwarded to my RRAS at 172.22.200.50. If I configure RRAS to assign IPs from a static pool on the 172.22.200.0/24 subnet everything works fine except the DNS suffix / search domain. However, if I set RRAS to use DHCP I am no longer able to contact any devices on the network. The IP I receive is on a different subnet (172.22.100.0/24). Is it possible to still use DHCP as the method of ip assignment in RRAS, even when the IP adresses assigned are in a different subnet? If yes, what piece of configuration am I missing to fix the VPN connection issues mentioned in the paragraph above. The reason I want RRAS with DHCP to work is because from what I have understood, this is the "only" way to hand out a DNS suffix to VPN clients. Any help on this matter is greatly appreciated!

  Read the article

• ospfd over an OpenVPN link - strange error in logs

  - by Alex

  I am trying to set up Quagga ospfd on two hosts connected by an OpenVPN link. These hosts have VPN IPs 10.31.0.1 and 10.31.0.13. ospfd config is pretty simple: hostname bizon password xxxxxxxxx enable password xxxxxxxxx ! log file /var/log/quagga/ospfd.log ! interface lo ! interface tun0 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 interface tun1 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 interface tun2 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 ! router ospf ospf router-id 10.31.0.1 network 10.31.0.0/16 area 0.0.0.0 network 10.119.2.0/24 area 0.0.0.0 redistribute connected area 0.0.0.0 range 10.0.0.0/8 ! line vty ! debug ospf event debug ospf packet all I am getting the following error in the ospfd.log (the log is from 10.31.0.13): 2012/10/05 01:25:28 OSPF: ip_v 4 2012/10/05 01:25:28 OSPF: ip_hl 5 2012/10/05 01:25:28 OSPF: ip_tos 192 2012/10/05 01:25:28 OSPF: ip_len 64 2012/10/05 01:25:28 OSPF: ip_id 64666 2012/10/05 01:25:28 OSPF: ip_off 0 2012/10/05 01:25:28 OSPF: ip_ttl 1 2012/10/05 01:25:28 OSPF: ip_p 89 2012/10/05 01:25:28 OSPF: ip_sum 0xe5d1 2012/10/05 01:25:28 OSPF: ip_src 10.31.0.1 2012/10/05 01:25:28 OSPF: ip_dst 224.0.0.5 2012/10/05 01:25:28 OSPF: Packet from [10.31.0.1] received on link tun1 but no ospf_interface I'm not sure what to do next. I have set up ospfd over OpenVPN several times but I used Debian and I am on CentOS 6 now. Quagga version is 0.99.15. Should I try to get more recent version?

  Read the article

• (Zywall USG 300) NAT bypassed when accessing in-house-server From LAN Via domain name

  - by mschr

  My situations is like this; i host a number of websites from within our joint network solution. On the network is basically 3 categories: the known public, registered via mac, given static dhcp lease the anonymous lan connections, given lease from specific dhcp range switches, unix hosts firewall Now, consider following hosts which are of interest 111.111.111.111 (Zywall USG 300 WAN) 192.168.1.1 (ZyWall USG 300 LAN) load balances and bw monitors plus handles NAT 192.168.1.2 (Linux www) serves mydomain1.tld and mydomain2.tld 192.168.123.123 (Random LAN client) accesses mydomain1.tld from LAN 23.234.12.253 (Random External client) accesses mydomain1.tld via WAN DNS A records are setup so that both mydomain1.tld and mydomain2.tld points to 111.111.111.111 - and the Linux www serves the http parts with VirtualHost configurations, setting up the document roots pr ServerName, this is not so interesting though.. NAT rule translates 111.111.111.111:80 to 192.168.1.2:80 (1:1 NAT) Our problem follows; When accessing http://mydomain1.tld from outside (23.234.12.253 example host) the joint network - everything is fine, zywall receives requests via port 80 and maps it to the linux host' httpd. However - once trying to go through the NAT from LAN side (in-house, 192.168.123.123 example host) then one gets filtered in the Zywall port 80 firewall. I know this only because port 443 is open for administration interface and https://mydomain1.tld prompts for zywall login. So my conclusion is, that the LAN that accesses 111.111.111.111 in fact are routed to 192.168.1.1 whilst bypassing the NAT table. I need to know how to setup NAT / Policy Route, so that LAN WAN LAN will function with proper network translations instead of doing the 'quick nameserver lookup' or whatever this might be.

  Read the article

< Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >