Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 302/534 | < Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >

  • Unable to mount 1TB USB external HDD - Error

    - by superbDeveloper
    Hi, I'm getting an error when I plug in my 1TB USB external HDD, the wierd thing about this is that it was working fine before and I've been using it for about a couple of months now. yesterday I compressed one of the folders which had about 120GB of data but the compression failed after an hour and I decided to unmount the drive and shut everything down. Today when I tried to plug in the drive I got the following error: Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdc, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so output of cat /proc/partitions below muzikayise@muzikayise-supercom:~$ sudo fdisk -l /dev/sdc Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x39dcba64 Device Boot Start End Blocks Id System please will someone kindly assist with this? thanks in advance,

    Read the article

  • Balancing agressive invites

    - by Nils Munch
    I am designing a trading card game for mobiles, with the possibility to add cards to your collection using Gems, aquired through victories and inapp purchases. I am thinking to increase the spread of the game with a tracking system on game invites, enabling the user to invite a friend to play the game. If the friend doesn't own the game client (which is free) he will be offered to download it. If he joins the game, the original player earns X amount of gems as an reward. There can only be one player per mobile device, which should rule out some harvesting. My question is, how do you think the structure of this would be recieved ? All invites are mail based, unless the player already exists in the game world (then he gets a ingame invitation.) I have set a flood filter, so a player can only invite a friend (without the client installed) once a month.

    Read the article

  • How to install Netgear N-300 UAB adapter WNA3100 on Ubuntu 12.04

    - by JacobusR
    After a fresh install of Ubuntu 12.04, the first thing I'm trying to do, is to setup my wireless adapter. I can see it using lsusb: beer@beer-linux:~$ lsusb ... Bus 002 Device 006: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] ... I have found a lot of dated instructions on the net and just wanted to know what the right way is to set it up on 12.04. I don't want to mess up a brand new install by tweaking things that don't need tweaking. According to most posts, you have to install the Windows drivers using the ndiswrapper package. Is this still the right way to go? If so, it would be great if someone could write down the steps to do this under 12.04

    Read the article

  • Ubuntu doesn't find hdds with higher clock rates

    - by user136243
    I dual boot windows 7 64-bit and ubuntu 13.10 64-bit on separate disks, and utilize some overclocking from the BIOS. Windows works fine, however ubuntu can't seem to find any hard drives, except for at stock cpu speeds. While attempting to boot it says Gave up waiting for root device... and ALERT! /dev/sdb7 does not exist. Dropping to shell! A bootable usb stick still works, but gparted doesn't detect any other drives. Have tried: Boot-repair Changing SATA mode in BIOS Newer kernels Older ubuntu versions Not sure it's relevant, but the motherboard is a Gigabyte GA-A75M-UD2H with the newest BIOS version, the CPU an AMD Llano. This is hardly a fatal error, but it's inconvenient to change BIOS settings whenever I want to switch OS, and furthermore I'm quite curious about why it won't work. I'd appreciate any insight into what the actual problem is. So how can I resolve this issue ?

    Read the article

  • Ubuntu 14.04 doesn't detect my discrete GPU

    - by user258887
    I recently purchased a laptop with an Nvidia GeForce 860m, and have installed Ubuntu 14.04. On my old laptop I had 12.04, which automatically filled Additional Drivers with Nvidia drivers. But on this computer, the only thing in Additional Drivers is Qualcomm. So I manually installed Nvidia, but X Server Settings doesn't seem to detect any GPU... lspci | grep VGA reports only my integrated Intel GPU, but lspci -v reports many things, including the Nvidia GPU: 01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2) Subsystem: ASUSTeK Computer Inc. Device 157d Flags: fast devsel, IRQ 16 Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at ed000000 [disabled] [size=512K] Capabilities: access denied Don't know what any of that means. Not sure if it's supposed to say 'access denied'... I need my GPU to do CUDA and OpenGL programming. What else can I do to figure out why this isn't working?

    Read the article

  • IDirect3DDevice9Ex and D3DPOOL_MANAGED?

    - by bluescrn
    So I wanted to switch to IDirect3DDevice9Ex, purely for the SetFrameLatency function, as fullscreen vsynced D3D seemed to produce noticable input lag. But then it tells me 'ha ha ha! now you can't use D3DPOOL_MANAGED!': Direct3D9: (ERROR) :D3DPOOL_MANAGED is not valid with IDirect3DDevice9Ex Is this really as unpleasant as it looks (when you're relying quite heavily on managed resources) - or is there a simple solution? If it really does mean manual management of everything (reloading all static textures, VBs, and IBs on a device reset), is it worth the hassle, will IDirect3DDevice9Ex bring enough benefit to make it worth writing a new resource manager? Starting to think I must be doing something wrong, due to this: Direct3D9: (ERROR) :Lock is not supported for textures allocated with POOL_DEFAULT unless they are marked D3DUSAGE_DYNAMIC. So if I put my (static) textures in POOL_DEFAULT, they need flagging as D3DUSAGE_DYNAMIC, just because I lock them once to load the data in?

    Read the article

  • Server 2012R2 – PowerShell Web Access

    - by Waclaw Chrabaszcz
    Originally posted on: http://geekswithblogs.net/Wchrabaszcz/archive/2014/05/17/server-2012r2--powershell-web-access.aspxHaha … Sometimes I'm joking that there is nothing worse than Linux fanboi imprisoned in Windows engineer's body. Maybe someday I will start blogging about my noob's experiences. However let's stick to the point. Sometimes the easiest solutions are the best. After couple of tries how to reach left pocket using right hand I'm going to follow easy path. Today's plan is very easy, I'm going to take advantage of Server 2012 and install Web gateway to PowerShell console. After that I would be able execute PoSH from any device including Linux. Install-WindowsFeature –Name WindowsPowerShellWebAccess –IncludeManagementToolsInstall-PswaWebApplication –UseTestCertificateAdd-PswaAuthorizationRule –UserName * -ComputerName * -ConfigurationName *  Let's test it …

    Read the article

  • Building Enterprise Smartphone App &ndash; Part 2: Platforms and Features

    - by Tim Murphy
    This is part 2 in a series of posts based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. In the previous post I discussed what reasons a company might have for creating a smartphone application.  In this installment I will cover some of history and state of the different platforms as well as features that can be leveraged for building enterprise smartphone applications. Platforms Before you start choosing a platform to develop your solutions on it is good to understand how we got here and what features you can leverage. History To my memory we owe all of this to a product called the Apple Newton that came out in 1987. It was the first PDA and back then I was much more of an Apple fan.  I was very impressed with this device even though it never really went anywhere.  The Palm Pilot by US Robotics was the next major advancement in PDA. It had a simple short hand window that allowed for quick stylus entry.. Later, Windows CE came out and started the broadening of the PDA market. After that it was the Palm and CE operating systems that started showing up on cell phones and for some time these were the two dominant operating systems that were distributed with devices from multiple hardware vendors. Current The iPhone was the first smartphone to take away the stylus and give us a multi-touch interface.  It was a revolution in usability and really changed the attractiveness of smartphones for the general public.  This brought us to the beginning of the current state of the market with the concept of an online store that makes it easy for customers to get new features and functionality on demand. With Android, Google made this more than a one horse race.  Not only did they come to compete, their low cost actually made them the leading OS.  Of course what made Android so attractive also is its major fault.  It is so open that it has been a target for malware which leaves consumers exposed.  Fortunately for Google though, most consumers aren’t aware of the threat that they are under. Although Microsoft had put out one of the first smart phone operating systems with CE it had to play catch up and finally came out with the Windows Phone.  They have gone for a market approach between those of iOS and Android.  They support multiple hardware vendors like Google, but they kept a certification process for applications that is similar to Apple.  They also created a user interface that was different enough to give it a clear separation from the other two platforms. The result of all this is hundreds of millions of smartphones being sold monthly across all three platforms giving us a wide range of choices and challenges when it comes to developing solutions. Features So what are the features that make these devices flexible enough be considered for use in the enterprise? The biggest advantage of today's devices is network connectivity.  The ability to access information from multiple sources at a moment’s notice is critical for businesses.  Add to that the ability to communicate over a variety of text, voice and video modes and we have a powerful starting point. Every smartphone has a cameras and they are not just useful for posting to Instagram. We are seeing more applications such as Bing vision that allow us to scan just about any printed code or text to find information.  These capabilities have been made available to developers in the form of standard libraries for reading barcodes of just about an flavor and optical character recognition (OCR) interpretation. Bluetooth give us the ability to communicate with multiple devices. Whether these are headsets, keyboard or printers the wireless communication capabilities are just starting to evolve.  The more these wireless communication protocols grow, the more opportunities we will see to transfer data between users and a variety of devices. Local storage of information that can be called up even when the device cannot reach the network is the other big capability.  This give users the ability to work offline as well and transmit information when connections are restored. These are the tools that we have to work with to build applications that can be leveraged to gain a competitive advantage for companies that implement them. Coming Up In the third installment I will cover key concerns that you face when building enterprise smartphone apps. del.icio.us Tags: smartphones,enterprise smartphone Apps,architecture,iOS,Android,Windows Phone

    Read the article

  • How to Disable or Uninstall Android Bloatware

    - by Chris Hoffman
    Manufacturers and carriers often load Android phones with their own apps. If you don’t use them, they just clutter your system and sometimes in the background, draining resources. Take control of your device and stop the bloatware. We’ll be focusing on disabling – also known as “freezing” bloatware here. It’s a safer process than uninstalling the bloatware completely, and is also easier to accomplish with free apps. HTG Explains: Learn How Websites Are Tracking You Online Here’s How to Download Windows 8 Release Preview Right Now HTG Explains: Why Linux Doesn’t Need Defragmenting

    Read the article

  • How to set up bridged networking in Xen?

    - by Joe Carr
    I have 2 domU virtual machines installed on a 11.10 Oneiric Dom0. My internal network is on the 192.168.1 subnet, and when the domU's start, they get ips on the 192.168.122 subnet. I have attempted to follow the instructions here : http://wiki.kartbuilding.net/index.php/Xen_Networking xend-config.sxp is configured correctly, but neither of my domU's have a config file in /etc/xen to modify. ifconfig reports that I have the following devices : eth0, lo, tap3.0, vif3.0, vif4.0, virbr0 bridge-utils is installed. I also just attempted to follow these steps : http://serverfault.com/questions/233201/bringing-the-xenbr0-interface-up-on-xen-under-ubuntu-8-04 sudo brctl addbr xenbr0 sudo brctl addif xenbr0 vif3.0 device vif3.0 is already a member of a bridge; can't enslave it to bridge xenbr0. Any ideas on next steps are greatly appreciated!

    Read the article

  • Oracle ADF Mobile is Now Available!

    - by Michelle Kimihira
    We are happy to announce availability of Oracle ADF Mobile, part of Oracle ADF (Application Development Framework). Oracle ADF is an HTML5 & Java-based framework that enables developers to build and deploy to iOS and Android devices from one application code base. By using open standards like HTML5 for a cross-platform consistent interface and Java for the application logic, companies can readily leverage existing skill and resources to develop mobile applications for iOS and Android.  There’s no need to learn a new platform specific programming language for each device.  With Oracle ADF Mobile -  you simply write once, deploy to many! Read the press release here.     On Wednesday, we will be featuring a blog on developing mobile applications and exploring the different options: Web, Native, or Hybrid. Additional Information Blog: ADF Blog Product Information on OTN: ADF Mobile Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

    Read the article

  • How to Restrict Android App Permissions

    - by Chris Hoffman
    Android forces you to agree to every permission an app wants, assuming you want to use the app. After rooting your device, you can manage permissions on a per-app basis. Restricting permissions allows you to protect your contacts and other private data from apps that demand access you’d rather not allow. Many apps will continue working properly after you revoke the permissions. HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

    Read the article

  • fix pavucontrol Alsa mixer with creative card

    - by schwiz
    I have been desperately trying to get my creative x-fi soundcard to work with my 10.10 install and I am almost there! I have 1 speaker working and when I open volume control I see that my device is Creative X-fi (Also mixer). However, it appears to be stuck on mono. When I open pavucontrol I get a message that says Connection failed: Connection refused and it exits. Before it closes I can see that playback is set to mono but it won't let me change before it closes. Can someone help me over this last hump? I am running 32 bit 10.10 any advice is much appreciated.

    Read the article

  • Ubuntu 10.10 USB drive not showing

    - by Ben
    USB is detecting but not showing the drives or mount details. Nothing there inside my /media folder and /mnt folder. I already enabled automatic mount and give privilege to user also. My sudo fdisk -l shows like: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d3ba7 Device Boot Start End Blocks Id System /dev/sda1 * 1 29637 238053376 83 Linux /dev/sda2 29637 30402 6142977 5 Extended /dev/sda5 29637 30402 6142976 82 Linux swap / Solaris Any idea?

    Read the article

  • choppy sound with random popping 13.04

    - by Goddard
    I was hoping some one could help me figure out why my audio is popping randomly. I just got some new speakers and it was popping previously, but I was using monitor speakers so it wasn't really noticeable. Now I have some Bose speakers hooked up via an analog cable. It is not the speakers because my Android phone plays audio fine. When I open the sound settings window the popping happens at exactly the same time a third sound device is displayed very quickly and then disappears. This keeps happening at about 30 second intervals. Any help is appreciate. If you need more details just let me know how to get them.

    Read the article

  • Mouse and keyboard stop working after suspend or screensaver lock

    - by LEo
    If I leave the computer and let it run into screensaver and lock the screen, the mouse left click won't go back to work. If I suspend the computer, the keyboard won't get back to work. It started after upgrading to Ubuntu 11.04. Any tips to solve this problem? The follwing lines I got on dmesg after the problem happened [30536.564415] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [30536.565725] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [30536.568466] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [30536.569790] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [30536.571123] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [30536.571126] psmouse.c: issuing reconnect request and that after I tried to plug again my USB mouse: [31570.040088] usb 6-1: USB disconnect, address 2 [31573.490095] usb 6-1: new low speed USB device using uhci_hcd and address 3 [31573.687376] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input12 [31573.687544] generic-usb 0003:045E:0084.0002: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.1-1/input0

    Read the article

  • Tp_smapi on Thinkpad T440

    - by user2597381
    I have a Thinkpad T440 with Ubuntu 14.04 (using i3wm). I have had trouble installing tp_smapi. I successfully installed it with dpkg -- can't remember whether I used apt or just downloaded it somewhere -- but I can't load the module. When I use modprobe on tp_smapi, I get this: "modprobe: ERROR: could not insert 'tp_smapi': No such device or address" Note that this is different from the error I get when I mistype the module name. I read somewhere that I might have to rebuild my kernel for it to work, but I'd thought that the kernel I was using (3.13.0-24) had that already set up. Has anyone gotten it to work? I hate how Lenovo manages the batteries!

    Read the article

  • trouble detecing huawei EC156 in ubuntu 12.04

    - by naina
    the data card is never detected automatically...its detected only when i fire a lsusb. Later i give modeswitch commands etc etc...then the device works fine..i can easily use internet...but once i disconnect from the net, its impossible to reestablish the connection...to reconnect i have to type all the commands, starting with lsusb, in the terminal again..ie every time i want a connection i have to sit and type 5-6 commands in the terminal before i can get through. what can be done to get automatic net connection as soon as i plug in the data card...please help...

    Read the article

  • How can I get wireless working on an HP-Mini 110-3150?

    - by jfmessier
    I just got an HP Mini 110-3150, and booting from an external hard disk with Ubuntu 10.10 works all fine, except that there is no wireless detected. I noticed that the Wireless indicator is red under Ubuntu, but is enabled under whatever Windows 7 I got on it. So, I understand that it may not get detected at all by Ubuntu at startup time, and there is no manual switch that I can simply slide to turn on/off. How can I get the Wireless device turned ON by default at startup time, and is there any special driver I need to install (proprietary or not) to get it working ? Merci :-) Update: When actually installing on the computer, as a new install, the NIC is not detected at first, but upon restarting, I get a notification of a closed driver available for the wireless. Once installed, updated and restarted, it works fine.

    Read the article

  • How do i use latest Pulseaudio in 11.10?

    - by YumYumYum
    Ubuntu 11.04 i had pulseaudio from source compiled and i used it to learn, it always worked (git versions). But since i have Ubuntu 11.10, i can install it but i can not use it anymore like i do in 11.04 before. Everytime i play something its throwing this: $ speaker-test speaker-test 1.0.24.2 Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Rate set to 48000Hz (requested 48000Hz) Buffer size range from 192 to 2097152 Period size range from 64 to 699051 Using max buffer size 2097152 Periods = 4 ALSA lib pcm_pulse.c:746:(pulse_prepare) PulseAudio: Unable to create stream: Invalid argument Unable to set hw params for playback: Input/output error Setting of hwparams failed: Input/output error How to make pulseaudio work in 11.10 from source?

    Read the article

  • KDE's Dolphin Can't See Connected devices such as Nikon, Canon Cameras

    - by Swapnil
    I have noticed this problem across all distros including Kubuntu and openSUSE. Many times my Nikon D 7000 and Canon HF 11 are not seen or mounted by Dolphin. When I connect the Cameras I don't get any notification in the tray which otherwise shows connected device. Ironically when I open Nautilus then I can clearly see the cameras mounted. I also have a request that what these devices don't appear on Dolphin's side panel automatically. It makes life easier for a users. https://bugs.launchpad.net/ubuntu/+source/dolphin/+bug/956806/+attachment/2879913/+files/dolphin.png

    Read the article

  • TechEd 2010 Schedule and Twitter Tool

    - by Scott Dorman
    If you’re going to TechEd 2010* (North America), be sure to check out the TechEd 2010 Schedule and Twitter Tool. If you have a mobile device (Windows Mobile 6.5, Android, iPhone), a tablet (Windows 7, iPad), or even a laptop (Windows Vista or Windows 7 gadgets) then this tool is essential. It allows you to view all of the session details and build your own customized schedule. You can also keep up with all of the TechEd related Twitter traffic from the same application. By default, the #TechEd hashtag is tracked, but you can add your own favorite hash tags as well. You can also send tweets using SMS. Technorati Tags: TechEd

    Read the article

  • How to control fan speed and temperatures on Asus A8Js laptop running Ubuntu Server?

    - by Azeworai
    Hi, I have tried installing asusfan and lm-sensors but I'm unable to control my fans to cool my laptop down sufficiently. Currently it overheats at about 100 degrees celsius and my sensors output somehow does not have any fan information on it: jackson@OLYMPIA:~$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +69.0°C (crit = +110.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +66.0°C (high = +100.0°C, crit = +100.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +66.0°C (high = +100.0°C, crit = +100.0°C) I have checked my bios and there isn't any fan settings there. I can consistently overheat just by converting a video via Handbrake. I have ubuntu-desktop installed for a GUI. Is there a way for me to control my fans to start spinning before it reaches a critical temperature and kills itself?

    Read the article

  • USB modem could not mount on 12.04

    - by maz
    I have a usb wimax modem. If I connect it at ubuntu 10.04 it has been detected and mounted as cd see here. From there I got that it is "iso96660" type and device location is /dev/sr1. But when I connect this usb modem in Ubuntu 12.04, it could not be mounted. So I have tried to find the file sr1 in this location /dev/ and could not found any-thing. But if disconnect and then re-connect the usb modem at this path /dev/, I saw a flickering of "sr1" named file for a certain time (1 sec) then it's dis-appear. Can anyone guide me to connect it step-by-step in Ubuntu 12.04?

    Read the article

  • Using RSYNC to Replicate Synology NAS DS710+ to Windows 7 Hard Drive

    Learn how to use a local backup drive on your windows 7 system to replicate the data on any or all of your directories on your Synology NAS (Network Hard Drive Device) DS710+.  This post will... This site is a resource for asp.net web programming. It has examples by Peter Kellner of techniques for high performance programming...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

< Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >