Search Results

Search found 7955 results on 319 pages for 'signal processing'.

Page 302/319 | < Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >

• Getting a null reference exception exporting a slightly complex rdlc report to excel

  - by George Handlin

  Have an issue in exporting a slightly complex report to excel from an rdlc. Exporting a simple tabular report works fine, but getting a null reference exception with a more complex one. As is usually the case, it works on the server in the development environment, but not in the test environment. The server in the development environment has iis, sql and sql reporting services on it and test only has iis (I didn't set them up). I'm guessing there is something that gets installed with SSRS that is not installed with just the report viewer. The report has several parameters going into it and a few generic lists going in for datasources. Some tables for display as well as a list. Working with the 2005 version. Exception follows: [NullReferenceException: Object reference not set to an instance of an object.] Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageLayout(PageLayout pageLayout, Int32& currentPageNumber, Stack& stack) +91 Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageCollection(PageCollection pageCollection, Int32& currentPageNumber, Stack& stack, PageLayout& lastPageLayout) +607 Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GenerateWorkSheets() +150 Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GenerateMainSheet() +358 Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderExcelWorkBook(CreateAndRegisterStream createAndRegisterStream) +158 Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.ProcessReport(CreateAndRegisterStream createAndRegisterStream) +385 Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream) +230 [ReportRenderingException: An error occurred during rendering of the report.] Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream) +296 Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(IRenderingExtension renderer, CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) +1124 [WrapperReportRenderingException: An error occurred during rendering of the report.] Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(IRenderingExtension renderer, CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) +1681 Microsoft.Reporting.LocalService.RenderWithDataCache(PreviewItemContext itemContext, ParameterInfoCollection reportParameters, IEnumerable dataSources, DatasourceCredentialsCollection credentials, IRenderingExtension renderer, ReportProcessing repProc, CreateAndRegisterStream createStreamCallback, ReportRuntimeSetup runtimeSetup) +1693 Microsoft.Reporting.LocalService.Render(PreviewItemContext itemContext, Boolean allowInternalRenderers, ParameterInfoCollection reportParameters, IEnumerable dataSources, DatasourceCredentialsCollection credentials, CreateAndRegisterStream createStreamCallback, ReportRuntimeSetup runtimeSetup, ProcessingMessageList& warnings) +227 Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, CreateAndRegisterStream createStreamCallback, Warning[]& warnings) +235 [LocalProcessingException: An error occurred during local report processing.] Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, CreateAndRegisterStream createStreamCallback, Warning[]& warnings) +276 Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings) +189 Microsoft.Reporting.WebForms.LocalReport.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings) +28 Microsoft.Reporting.WebForms.LocalReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileNameExtension) +52 Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +153 Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +202 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64

  Read the article

• Installing MySQL on Ubuntu 12 fails on a clean installation

  - by Keenora Fluffball

  I do have the problem, that even if I uninstall mysql completely and do a restart, it still doesn't install mysql. This is the error I get: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Statusinformationen werden eingelesen... Fertig Die folgenden zusätzlichen Pakete werden installiert: libdbd-mysql-perl libmysqlclient18 mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server-5.5 mysql-server-core-5.5 Vorgeschlagene Pakete: tinyca mailx Die folgenden NEUEN Pakete werden installiert: libdbd-mysql-perl libmysqlclient18 mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server mysql-server-5.5 mysql-server-core-5.5 0 aktualisiert, 8 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 26,2 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 94,2 MB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren [J/n]? J Hole:1 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-common all 5.5.28-0ubuntu0.12.10.1 [13,4 kB] Hole:2 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main libmysqlclient18 amd64 5.5.28-0ubuntu0.12.10.1 [949 kB] Hole:3 http://de.archive.ubuntu.com/ubuntu/ quantal/main libdbd-mysql-perl amd64 4.021-1 [97,7 kB] Hole:4 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-client-core-5.5 amd64 5.5.28-0ubuntu0.12.10.1 [1.941 kB] Hole:5 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-client-5.5 amd64 5.5.28-0ubuntu0.12.10.1 [8.332 kB] Hole:6 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-server-core-5.5 amd64 5.5.28-0ubuntu0.12.10.1 [5.983 kB] Hole:7 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-server-5.5 amd64 5.5.28-0ubuntu0.12.10.1 [8.842 kB] Hole:8 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-server all 5.5.28-0ubuntu0.12.10.1 [11,6 kB] Es wurden 26,2 MB in 1 min 5 s geholt (399 kB/s) Vorkonfiguration der Pakete ... Vormals nicht ausgewähltes Paket mysql-common wird gewählt. (Lese Datenbank ... 68073 Dateien und Verzeichnisse sind derzeit installiert.) Entpacken von mysql-common (aus .../mysql-common_5.5.28-0ubuntu0.12.10.1_all.deb) ... Vormals nicht ausgewähltes Paket libmysqlclient18:amd64 wird gewählt. Entpacken von libmysqlclient18:amd64 (aus .../libmysqlclient18_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Vormals nicht ausgewähltes Paket libdbd-mysql-perl wird gewählt. Entpacken von libdbd-mysql-perl (aus .../libdbd-mysql-perl_4.021-1_amd64.deb) ... Vormals nicht ausgewähltes Paket mysql-client-core-5.5 wird gewählt. Entpacken von mysql-client-core-5.5 (aus .../mysql-client-core-5.5_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Vormals nicht ausgewähltes Paket mysql-client-5.5 wird gewählt. Entpacken von mysql-client-5.5 (aus .../mysql-client-5.5_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Vormals nicht ausgewähltes Paket mysql-server-core-5.5 wird gewählt. Entpacken von mysql-server-core-5.5 (aus .../mysql-server-core-5.5_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Trigger für man-db werden verarbeitet ... mysql-common (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... Vormals nicht ausgewähltes Paket mysql-server-5.5 wird gewählt. (Lese Datenbank ... 68251 Dateien und Verzeichnisse sind derzeit installiert.) Entpacken von mysql-server-5.5 (aus .../mysql-server-5.5_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Vormals nicht ausgewähltes Paket mysql-server wird gewählt. Entpacken von mysql-server (aus .../mysql-server_5.5.28-0ubuntu0.12.10.1_all.deb) ... Trigger für man-db werden verarbeitet ... Trigger für ureadahead werden verarbeitet ... libmysqlclient18:amd64 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... libdbd-mysql-perl (4.021-1) wird eingerichtet ... mysql-client-core-5.5 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... mysql-client-5.5 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... mysql-server-core-5.5 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... mysql-server-5.5 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld in /etc/apparmor.d/usr.sbin.mysqld at line 9: >>abstractions/mysql<< konnte nicht ge?ffnet werden start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: Fehler beim Bearbeiten von mysql-server-5.5 (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück dpkg: Abhängigkeitsprobleme verhindern Konfiguration von mysql-server: mysql-server hängt ab von mysql-server-5.5; aber: Paket mysql-server-5.5 ist noch nicht konfiguriert. dpkg: Fehler beim Bearbeiten von mysql-server (--configure): Abhängigkeitsprobleme - verbleibt unkonfiguriert Trigger für libc-bin werden verarbeitet ... ldconfig deferred processing now taking place Es wurde kein Apport-Bericht verfasst, da die Fehlermeldung darauf hindeutet, dass dies lediglich ein Folgefehler eines vorherigen Problems ist. Fehler traten auf beim Bearbeiten von: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) Do you have any clue, whats going on here?

  Read the article

• WCF security via message headers

  - by exalted

  I'm trying to implement "some sort of" server-client & zero-config security for some WCF service. The best (as well as easiest to me) solution that I found on www is the one described at http://www.dotnetjack.com/post/Automate-passing-valuable-information-in-WCF-headers.aspx (client-side) and http://www.dotnetjack.com/post/Processing-custom-WCF-header-values-at-server-side.aspx (corrisponding server-side). Below is my implementation for RequestAuth (descibed in the first link above): using System; using System.Diagnostics; using System.ServiceModel; using System.ServiceModel.Configuration; using System.ServiceModel.Dispatcher; using System.ServiceModel.Description; using System.ServiceModel.Channels; namespace AuthLibrary { /// <summary> /// Ref: http://www.dotnetjack.com/post/Automate-passing-valuable-information-in-WCF-headers.aspx /// </summary> public class RequestAuth : BehaviorExtensionElement, IClientMessageInspector, IEndpointBehavior { [DebuggerBrowsable(DebuggerBrowsableState.Never)] private string headerName = "AuthKey"; [DebuggerBrowsable(DebuggerBrowsableState.Never)] private string headerNamespace = "http://some.url"; public override Type BehaviorType { get { return typeof(RequestAuth); } } protected override object CreateBehavior() { return new RequestAuth(); } #region IClientMessageInspector Members // Keeping in mind that I am SENDING something to the server, // I only need to implement the BeforeSendRequest method public void AfterReceiveReply(ref System.ServiceModel.Channels.Message reply, object correlationState) { throw new NotImplementedException(); } public object BeforeSendRequest(ref System.ServiceModel.Channels.Message request, System.ServiceModel.IClientChannel channel) { MessageHeader<string> header = new MessageHeader<string>(); header.Actor = "Anyone"; header.Content = "TopSecretKey"; //Creating an untyped header to add to the WCF context MessageHeader unTypedHeader = header.GetUntypedHeader(headerName, headerNamespace); //Add the header to the current request request.Headers.Add(unTypedHeader); return null; } #endregion #region IEndpointBehavior Members public void AddBindingParameters(ServiceEndpoint endpoint, System.ServiceModel.Channels.BindingParameterCollection bindingParameters) { throw new NotImplementedException(); } public void ApplyClientBehavior(ServiceEndpoint endpoint, ClientRuntime clientRuntime) { clientRuntime.MessageInspectors.Add(this); } public void ApplyDispatchBehavior(ServiceEndpoint endpoint, EndpointDispatcher endpointDispatcher) { throw new NotImplementedException(); } public void Validate(ServiceEndpoint endpoint) { throw new NotImplementedException(); } #endregion } } So first I put this code in my client WinForms application, but then I had problems signing it, because I had to sign also all third-party references eventhough http://msdn.microsoft.com/en-us/library/h4fa028b(v=VS.80).aspx at section "What Should Not Be Strong-Named" states: In general, you should avoid strong-naming application EXE assemblies. A strongly named application or component cannot reference a weak-named component, so strong-naming an EXE prevents the EXE from referencing weak-named DLLs that are deployed with the application. For this reason, the Visual Studio project system does not strong-name application EXEs. Instead, it strong-names the Application manifest, which internally points to the weak-named application EXE. I expected VS to avoid this problem, but I had no luck there, it complained about all the unsigned references, so I created a separate "WCF Service Library" project inside my solution containing only code above and signed that one. At this point entire solution compiled just okay. And here's my problem: When I fired up "WCF Service Configuration Editor" I was able to add new behavior element extension (say "AuthExtension"), but then when I tried to add that extension to my end point behavior it gives me: Exception has been thrown by the target of an invocation. So I'm stuck here. Any ideas?

  Read the article

• How to populate a core data store programmatically?

  - by jdmuys

  I have ran out of hairs to pull with a crash in this routine that populates a core data store from a 9000+ line plist file. The crash happened at the very end of the routine inside the call to [managedObjectContext save:&error]. While if I save after every object insertion, the crash doesn't happen. Of course, saving after every object insertion totally kills the performance (from less than a second to many minutes). I modified my code so that it saves every K insertions, and the crash happens as soon as K = 2. The crash is an out-of-bound exception for an NSArray: Serious application error. Exception was caught during Core Data change processing: *** -[NSCFArray objectAtIndex:]: index (1) beyond bounds (1) with userInfo (null) Also maybe relevant, when the exception happen, my fetch result controller controllerDidChangeContent: delegate routine is in the call stack. It simply calls my table view endUpdate routine. I am now running out of ideas. How am I supposed to populate a core data store with a table view? Here is the call stack: #0 0x901ca4e6 in objc_exception_throw #1 0x01d86c3b in +[NSException raise:format:arguments:] #2 0x01d86b9a in +[NSException raise:format:] #3 0x00072cb9 in _NSArrayRaiseBoundException #4 0x00010217 in -[NSCFArray objectAtIndex:] #5 0x002eaaa7 in -[UITableView(_UITableViewPrivate) _endCellAnimationsWithContext:] #6 0x002def02 in -[UITableView endUpdates] #7 0x00004863 in -[AirportViewController controllerDidChangeContent:] at AirportViewController.m:463 #8 0x01c43be1 in -[NSFetchedResultsController(PrivateMethods) _managedObjectContextDidChange:] #9 0x0001462a in _nsnote_callback #10 0x01d31005 in _CFXNotificationPostNotification #11 0x00011ee0 in -[NSNotificationCenter postNotificationName:object:userInfo:] #12 0x01ba417d in -[NSManagedObjectContext(_NSInternalNotificationHandling) _postObjectsDidChangeNotificationWithUserInfo:] #13 0x01c03763 in -[NSManagedObjectContext(_NSInternalChangeProcessing) _createAndPostChangeNotification:withDeletions:withUpdates:withRefreshes:] #14 0x01b885ea in -[NSManagedObjectContext(_NSInternalChangeProcessing) _processRecentChanges:] #15 0x01bbe728 in -[NSManagedObjectContext save:] #16 0x000039ea in -[AirportViewController populateAirports] at AirportViewController.m:112 Here is the code to the routine. I apologize because a number of lines are probably irrelevant, but I'd rather err on that side. The crash happens the very first time it calls [managedObjectContext save:&error]: - (void) populateAirports { NSBundle *meBundle = [NSBundle mainBundle]; NSString *dbPath = [meBundle pathForResource:@"DuckAirportsBin" ofType:@"plist"]; NSArray *initialAirports = [[NSArray alloc] initWithContentsOfFile:dbPath]; //********************************************************************************* // get existing countries NSMutableDictionary *countries = [[NSMutableDictionary alloc] initWithCapacity:200]; NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Country" inManagedObjectContext:managedObjectContext]; [fetchRequest setEntity:entity]; NSError *error = nil; NSArray *values = [managedObjectContext executeFetchRequest:fetchRequest error:&error]; if (!values) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } int numCountries = [values count]; NSLog(@"We have %d countries in store", numCountries); for (Country *aCountry in values) { [countries setObject:aCountry forKey:aCountry.code]; } [fetchRequest release]; //********************************************************************************* // read airports int numAirports = 0; int numUnsavedAirports = 0; #define MAX_UNSAVED_AIRPORTS_BEFORE_SAVE 2 numCountries = 0; for (NSDictionary *anAirport in initialAirports) { NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; NSString *countryCode = [anAirport objectForKey:@"country"]; Country *thatCountry = [countries objectForKey:countryCode]; if (!thatCountry) { thatCountry = [NSEntityDescription insertNewObjectForEntityForName:@"Country" inManagedObjectContext:managedObjectContext]; thatCountry.code = countryCode; thatCountry.name = [anAirport objectForKey:@"country_name"]; thatCountry.population = 0; [countries setObject:thatCountry forKey:countryCode]; numCountries++; NSLog(@"Found %dth country %@=%@", numCountries, countryCode, thatCountry.name); } // now that we have the country, we create the airport Airport *newAirport = [NSEntityDescription insertNewObjectForEntityForName:@"Airport" inManagedObjectContext:managedObjectContext]; newAirport.city = [anAirport objectForKey:@"city"]; newAirport.code = [anAirport objectForKey:@"code"]; newAirport.name = [anAirport objectForKey:@"name"]; newAirport.country_name = [anAirport objectForKey:@"country_name"]; newAirport.latitude = [NSNumber numberWithDouble:[[anAirport objectForKey:@"latitude"] doubleValue]]; newAirport.longitude = [NSNumber numberWithDouble:[[anAirport objectForKey:@"longitude"] doubleValue]]; newAirport.altitude = [NSNumber numberWithDouble:[[anAirport objectForKey:@"altitude"] doubleValue]]; newAirport.country = thatCountry; // [thatCountry addAirportsObject:newAirport]; numAirports++; numUnsavedAirports++; if (numUnsavedAirports >= MAX_UNSAVED_AIRPORTS_BEFORE_SAVE) { if (![managedObjectContext save:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } numUnsavedAirports = 0; } [pool release]; }

  Read the article

• Droid's mediaserver dies on camera.takePicture()

  - by SirBoss

  On Motorola Droid, Firmware 2.1-update1, Kernel 2.9.29-omap1, Build # ESE81 When attempting to take a picture, mediaserver dies with a segmentation fault. I've tried putting takePicture in a timer and running it a few seconds after camera initialization to check for race conditions, but no change. Just calling Camera.open() doesn't cause the crash. Also, calling Camera.open() causes what I think is the autofocus motor to make a sort of ticking sound. Code that breaks: import android.app.Activity; import android.os.Bundle; public final class ChopperMain extends Activity { public void onCreate(Bundle savedInstanceState) { try { Camera camera = Camera.open(); catch (Exception e) { e.printStackTrace(); } camera.takePicture( new Camera.ShutterCallback() { public void onShutter() { ; } }, new Camera.PictureCallback() { public void onPictureTaken(byte[] data, Camera camera) { ; } }, new Camera.PictureCallback() { public void onPictureTaken(byte[] data, Camera camera) { ; } }, new PictureCallback() { public void onPictureTaken(byte[] data, Camera camera) { System.out.println("Ta da."); } } }); } catch (Exception e) { e.printStackTrace(); } } } Debug Log: D/CameraHal(10158): CameraSettings constructor D/CameraHal(10158): CameraHal constructor D/CameraHal(10158): Model ID: Droid D/CameraHal(10158): Software ID 2.1-update1 D/dalvikvm( 988): GC freed 2 objects / 56 bytes in 215ms D/ViewFlipper( 1074): updateRunning() mVisible=false, mStarted=true, mUserPresent=false, mRunning=false I/HPAndroidHAL(10158): Version 2988. Build Time: Oct 26 2009:11:21:55. D/CameraHal(10158): 19 default parameters D/CameraHal(10158): Immediate Zoom/1:0. Current zoom level/1:0 D/CameraHal(10158): CameraHal constructor exited ok D/CameraService(10158): Client::Client X (pid 10400) D/CameraService(10158): CameraService::connect X D/CameraService(10158): takePicture (pid 10400) I/DEBUG (10159): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** I/DEBUG (10159): Build fingerprint: 'verizon/voles/sholes/sholes:2.1-update1/ESE81/29593:user/release-keys' I/DEBUG (10159): pid: 10158, tid: 10158 >>> /system/bin/mediaserver <<< I/DEBUG (10159): signal 11 (SIGSEGV), fault addr 00000008 I/DEBUG (10159): r0 00000000 r1 00000000 r2 a969030c r3 a9d1bfe0 I/DEBUG (10159): r4 00045eb0 r5 0000eb10 r6 000153a0 r7 a9c89fd2 I/DEBUG (10159): r8 00000000 r9 00000000 10 00000000 fp 00000000 I/DEBUG (10159): ip a969085c sp bec4fba0 lr a9689c65 pc a9d1bfde cpsr 60000030 I/DEBUG (10159): #00 pc 0001bfde /system/lib/libutils.so I/DEBUG (10159): #01 pc 00009c62 /system/lib/libcamera.so I/DEBUG (10159): #02 pc 00007b0c /system/lib/libcameraservice.so I/DEBUG (10159): #03 pc 00021f98 /system/lib/libui.so I/DEBUG (10159): #04 pc 00015514 /system/lib/libbinder.so I/DEBUG (10159): #05 pc 00018dd8 /system/lib/libbinder.so I/DEBUG (10159): #06 pc 00018fa6 /system/lib/libbinder.so I/DEBUG (10159): #07 pc 000087d2 /system/bin/mediaserver I/DEBUG (10159): #08 pc 0000c228 /system/lib/libc.so I/DEBUG (10159): I/DEBUG (10159): code around pc: I/DEBUG (10159): a9d1bfcc bd1061e3 f7f3b510 bd10e97e 4d17b570 I/DEBUG (10159): a9d1bfdc 6886a300 460418ed fff4f7ff d10a4286 I/DEBUG (10159): a9d1bfec 46234913 20054a13 f06f1869 18aa040a I/DEBUG (10159): I/DEBUG (10159): code around lr: I/DEBUG (10159): a9689c54 e0240412 0204f8d0 050cf104 edf0f7fd I/DEBUG (10159): a9689c64 f7fd4628 f8d4ecf2 b1533204 f852681a I/DEBUG (10159): a9689c74 18581c0c 7101f504 ed82f7fd f8c42000 I/DEBUG (10159): I/DEBUG (10159): stack: I/DEBUG (10159): bec4fb60 4000902c /dev/binder I/DEBUG (10159): bec4fb64 a9d19675 /system/lib/libutils.so I/DEBUG (10159): bec4fb68 00002bb4 I/DEBUG (10159): bec4fb6c a9d1b26f /system/lib/libutils.so I/DEBUG (10159): bec4fb70 bec4fbbc [stack] I/DEBUG (10159): bec4fb74 00095080 [heap] I/DEBUG (10159): bec4fb78 a9c8c028 /system/lib/libcameraservice.so I/DEBUG (10159): bec4fb7c a9c8c028 /system/lib/libcameraservice.so I/DEBUG (10159): bec4fb80 00015390 [heap] I/DEBUG (10159): bec4fb84 a9c89fd2 /system/lib/libcameraservice.so I/DEBUG (10159): bec4fb88 00045ebc [heap] I/DEBUG (10159): bec4fb8c afe0f110 /system/lib/libc.so I/DEBUG (10159): bec4fb90 00000000 I/DEBUG (10159): bec4fb94 afe0f028 /system/lib/libc.so I/DEBUG (10159): bec4fb98 df002777 I/DEBUG (10159): bec4fb9c e3a070ad I/DEBUG (10159): #00 bec4fba0 00045eb0 [heap] I/DEBUG (10159): bec4fba4 00045ebc [heap] I/DEBUG (10159): bec4fba8 000153a0 [heap] I/DEBUG (10159): bec4fbac a9689c65 /system/lib/libcamera.so I/DEBUG (10159): #01 bec4fbb0 a9c8c028 /system/lib/libcameraservice.so I/DEBUG (10159): bec4fbb4 00015390 [heap] I/DEBUG (10159): bec4fbb8 000153a0 [heap] I/DEBUG (10159): bec4fbbc a9c87b0f /system/lib/libcameraservice.so I/DEBUG (10159): debuggerd committing suicide to free the zombie! I/DEBUG (10426): debuggerd: Mar 22 2010 17:31:05 W/MediaPlayer( 1021): MediaPlayer server died! I/ServiceManager( 984): service 'media.audio_flinger' died I/ServiceManager( 984): service 'media.player' died I/ServiceManager( 984): service 'media.camera' died I/ServiceManager( 984): service 'media.audio_policy' died W/Camera (10400): Camera server died! W/Camera (10400): ICamera died E/Camera (10400): Error 100 I/System.out(10400): Camera error, code 100 W/AudioSystem( 1021): AudioFlinger server died! W/AudioSystem( 1021): AudioPolicyService server died! I/ (10425): ServiceManager: 0xad08 E/AudioPostProcessor(10425): E/AudioPostProcessor(10425): AudioMgr Error:Failed to open gains file /data/ap_gain.bin E/AudioPostProcessor(10425): E/AudioPostProcessor(10425): AudioMgr Error:Failed to read gains/coeffs from /data E/AudioPostProcessor(10425): Audio coeffs init success. I/CameraService(10425): CameraService started: pid=10425 D/Audio_Unsolicited(10425): in readyToRun D/Audio_Unsolicited(10425): Create socket successful 10 I/AudioFlinger(10425): AudioFlinger's thread 0x11c30 ready to run E/AudioService( 1021): Media server died. E/AudioService( 1021): Media server started. W/AudioPolicyManager(10425): setPhoneState() setting same state 0

  Read the article

• How to Zip one IEnumerable with itself

  - by wageoghe

  I am implementing some math algorithms based on lists of points, like Distance, Area, Centroid, etc. Just like in this post: http://stackoverflow.com/questions/2227828/find-the-distance-required-to-navigate-a-list-of-points-using-linq That post describes how to calculate the total distance of a sequence of points (taken in order) by essentially zipping the sequence "with itself", generating the sequence for Zip by offsetting the start position of the original IEnumerable by 1. So, given the Zip extension in .Net 4.0, assuming Point for the point type, and a reasonable Distance formula, you can make calls like this to generate a sequence of distances from one point to the next and then to sum the distances: var distances = points.Zip(points.Skip(1),Distance); double totalDistance = distances.Sum(); Area and Centroid calculations are similar in that they need to iterate over the sequence, processing each pair of points (points[i] and points[i+1]). I thought of making a generic IEnumerable extension suitable for implementing these (and possibly other) algorithms that operate over sequences, taking two items at a time (points[0] and points[1], points[1] and points[2], ..., points[n-1] and points[n] (or is it n-2 and n-1 ...) and applying a function. My generic iterator would have a similar signature to Zip, but it would not receive a second sequence to zip with as it is really just going to zip with itself. My first try looks like this: public static IEnumerable<TResult> ZipMyself<TSequence, TResult>(this IEnumerable<TSequence> seq, Func<TSequence, TSequence, TResult> resultSelector) { return seq.Zip(seq.Skip(1),resultSelector); } With my generic iterator in place, I can write functions like this: public static double Length(this IEnumerable<Point> points) { return points.ZipMyself(Distance).Sum(); } and call it like this: double d = points.Length(); and double GreensTheorem(Point p1, Point p1) { return p1.X * p2.Y - p1.Y * p2.X; } public static double SignedArea(this IEnumerable<Point> points) { return points.ZipMyself(GreensTheorem).Sum() / 2.0 } public static double Area(this IEnumerable<Point> points) { return Math.Abs(points.SignedArea()); } public static bool IsClockwise(this IEnumerable<Point> points) { return SignedArea(points) < 0; } and call them like this: double a = points.Area(); bool isClockwise = points.IsClockwise(); In this case, is there any reason NOT to implement "ZipMyself" in terms of Zip and Skip(1)? Is there already something in LINQ that automates this (zipping a list with itself) - not that it needs to be made that much easier ;-) Also, is there better name for the extension that might reflect that it is a well-known pattern (if, indeed it is a well-known pattern)? Had a link here for a StackOverflow question about area calculation. It is question 2432428. Also had a link to Wikipedia article on Centroid. Just go to Wikipedia and search for Centroid if interested. Just starting out, so don't have enough rep to post more than one link,

  Read the article

• Spring 3 simple extentionless url mappings with annotation-based mapping - impossible?

  - by caerphilly

  Hi, I'm using Spring 3, and trying to set up a simple web-app using annotations to define controller mappings. This seems to be incredibly difficult without peppering all the urls with *.form or *.do Because part of the site needs to be password protected, these urls are all under /secure. There is a <security-constraint> in the web.xml protecting everything under that root. I want to map all the Spring controllers to /secure/app/. Example URLs would be: /secure/app/landingpage /secure/app/edit/customer/{id} each of which I would handle with an appropriate jsp/xml/whatever. So, in web.xml I have this: <servlet> <servlet-name>dispatcher</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>dispatcher</servlet-name> <url-pattern>/secure/app/*</url-pattern> </servlet-mapping> And in despatcher-servlet.xml I have this: <context:component-scan base-package="controller" /> In the Controller package I have a controller class: package controller; import org.springframework.stereotype.Controller; import org.springframework.web.bind.annotation.RequestMapping; import org.springframework.web.bind.annotation.RequestMethod; import org.springframework.web.servlet.ModelAndView; import javax.servlet.http.HttpServletRequest; @Controller @RequestMapping("/secure/app/main") public class HomePageController { public HomePageController() { } @RequestMapping(method = RequestMethod.GET) public ModelAndView getPage(HttpServletRequest request) { ModelAndView mav = new ModelAndView(); mav.setViewName("main"); return mav; } } Under /WEB-INF/jsp I have a "main.jsp", and a suitable view resolver set up to point to this. I had things working when mapping the despatcher using *.form, but can't get anything working using the above code. When Spring starts up it appears to map everything correctly: 13:22:36,762 INFO main annotation.DefaultAnnotationHandlerMapping:399 - Mapped URL path [/secure/app/main] onto handler [controller.HomePageController@2a8ab08f] I also noticed this line, which looked suspicious: 13:25:49,578 DEBUG main servlet.DispatcherServlet:443 - No HandlerMappings found in servlet 'dispatcher': using default And at run time any attempt to view /secure/app/main just returns a 404 error in Tomcat, with this log output: 13:25:53,382 DEBUG http-8080-1 servlet.DispatcherServlet:842 - DispatcherServlet with name 'dispatcher' determining Last-Modified value for [/secure/app/main] 13:25:53,383 DEBUG http-8080-1 servlet.DispatcherServlet:850 - No handler found in getLastModified 13:25:53,390 DEBUG http-8080-1 servlet.DispatcherServlet:690 - DispatcherServlet with name 'dispatcher' processing GET request for [/secure/app/main] 13:25:53,393 WARN http-8080-1 servlet.PageNotFound:962 - No mapping found for HTTP request with URI [/secure/app/main] in DispatcherServlet with name 'dispatcher' 13:25:53,393 DEBUG http-8080-1 servlet.DispatcherServlet:677 - Successfully completed request So... Spring maps a URL, and then "forgets" about that mapping a second later? What is going on? Thanks.

  Read the article

• Using windows command line from Pascal

  - by Jordan

  I'm trying to use some windows command line tools from within a short Pascal program. To make it easier, I'm writing a function called DoShell which takes a command line string as an argument and returns a record type called ShellResult, with one field for the process's exitcode and one field for the process's output text. I'm having major problems with some standard library functions not working as expected. The DOS Exec() function is not actually carrying out the command i pass to it. The Reset() procedure gives me a runtime error RunError(2) unless i set the compiler mode {I-}. In that case i get no runtime error, but the Readln() functions that i use on that file afterwards don't actually read anything, and furthermore the Writeln() functions used after that point in the code execution do nothing as well. Here's the source code of my program so far. I'm using Lazarus 0.9.28.2 beta, with Free Pascal Compiler 2.24 program project1; {$mode objfpc}{$H+} uses Classes, SysUtils, StrUtils, Dos { you can add units after this }; {$IFDEF WINDOWS}{$R project1.rc}{$ENDIF} type ShellResult = record output : AnsiString; exitcode : Integer; end; function DoShell(command: AnsiString): ShellResult; var exitcode: Integer; output: AnsiString; exepath: AnsiString; exeargs: AnsiString; splitat: Integer; F: Text; readbuffer: AnsiString; begin //Initialize variables exitcode := 0; output := ''; exepath := ''; exeargs := ''; splitat := 0; readbuffer := ''; Result.exitcode := 0; Result.output := ''; //Split command for processing splitat := NPos(' ', command, 1); exepath := Copy(command, 1, Pred(splitat)); exeargs := Copy(command, Succ(splitat), Length(command)); //Run command and put output in temporary file Exec(FExpand(exepath), exeargs + ' __output'); exitcode := DosExitCode(); //Get output from file Assign(F, '__output'); Reset(F); Repeat Readln(F, readbuffer); output := output + readbuffer; readbuffer := ''; Until Eof(F); //Set Result Result.exitcode := exitcode; Result.output := output; end; var I : AnsiString; R : ShellResult; begin Writeln('Enter a command line to run.'); Readln(I); R := DoShell(I); Writeln('Command Exit Code:'); Writeln(R.exitcode); Writeln('Command Output:'); Writeln(R.output); end.

  Read the article

• Serial Port Not getting closed. I want to release the COM port ...

  - by sunil

  Serial Port Not getting closed. I want to release the COM port ... Below is my code.... import java.io.*; import java.util.*; import gnu.io.*; public class ReadCommPort implements SerialPortEventListener { static CommPortIdentifier portId; static Enumeration portList; InputStream inputStream; OutputStream outputStream; public SerialPort serialPort; List byteList = new ArrayList(); public static Message message = null; public void readData() { boolean portFound = false; String defaultPort = "COM1"; portList = CommPortIdentifier.getPortIdentifiers(); while ( portList.hasMoreElements() ) { portId = ( CommPortIdentifier )portList.nextElement(); if ( portId.getPortType() == CommPortIdentifier.PORT_SERIAL ) { if ( portId.getName().equals( defaultPort ) ) { System.out.println( "Found port: " + defaultPort ); portFound = true; buildSerialPort(); } } } if ( ! portFound ) { System.out.println( "port " + defaultPort + " not found." ); } } public void buildSerialPort() { try { serialPort = (SerialPort) portId.open( "ReadCommPort", 1 ); inputStream = serialPort.getInputStream(); outputStream = serialPort.getOutputStream(); serialPort.addEventListener( this ); serialPort.notifyOnDataAvailable(true); serialPort.setSerialPortParams( 2400, SerialPort.DATABITS_7, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE ); } catch ( Exception e ) { e.printStackTrace(); } } @SuppressWarnings("unchecked") public void serialEvent( SerialPortEvent event ) { switch ( event.getEventType() ) { case SerialPortEvent.BI: System.out.println( "BI"); break; case SerialPortEvent.OE: System.out.println( "OE"); break; case SerialPortEvent.FE: System.out.println( "FE"); break; case SerialPortEvent.PE: System.out.println( "PE"); break; case SerialPortEvent.CD: System.out.println( "CD"); break; case SerialPortEvent.CTS: System.out.println( "CTS"); break; case SerialPortEvent.DSR: System.out.println( "DSR"); break; case SerialPortEvent.RI: System.out.println( "RI"); break; case SerialPortEvent.OUTPUT_BUFFER_EMPTY: System.out.println( "OUTPUT_BUFFER_EMPTY"); break; case SerialPortEvent.DATA_AVAILABLE : try { int len = inputStream.available(); byte[] readBuffer = new byte[ len ]; // processing data code.. // close the port // release all resources... serialPort.removeEventListener(); try { serialPort.addEventListener( null ); } catch (TooManyListenersException e) { e.printStackTrace(); } inputStream.close(); outputStream.close(); serialPort.close(); } catch ( IOException e ) { e.printStackTrace(); } break; } } public static void main(String[] args) { new ReadCommPort().readData(); } }

  Read the article

• OpenSwan IPsec connection drops after 30 seconds

  - by drcore

  I'm trying to connection from my Linux Mint 16 box to a CloudStack server. Building up the connection works (pings work across the tunnel). However 30 seconds later the IPsec tunnel gets terminated out of the blue. What could cause this consistent behaviour and how to fix it? The tunnel is setup using OpenSwan (U2.6.38/K(no kernel code presently loaded)) with the L2TP IPsec VPN manager from Werner Jaeger 1.0.9. The client is behind a NAT'ed router and the server is on public IP (CloudStack 4.2) Running ipsec verify complains about IPsec support in kernel. Not sure if this is a problem as the connection is being build up: Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K(no kernel code presently loaded) Checking for IPsec support in kernel [FAILED] SAref kernel support [N/A] Checking that pluto is running [FAILED] whack: Pluto is not running (no "/var/run/pluto/pluto.ctl") Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] Tunnel config: version 2.0 # conforms to second version of ipsec.conf specification config setup # plutodebug="parsing emitting control private" plutodebug=none strictcrlpolicy=no nat_traversal=yes interfaces=%defaultroute oe=off # which IPsec stack to use. netkey,klips,mast,auto or none protostack=netkey conn %default keyingtries=3 pfs=no rekey=yes type=transport left=%defaultroute leftprotoport=17/1701 rightprotoport=17/1701 conn Tunnel1 authby=secret right=37.48.75.97 rightid="" auto=add Log file of VPN connection build up: aug. 23 17:12:54.708 ipsec_setup: Starting Openswan IPsec U2.6.38/K3.11.0-12-generic... aug. 23 17:12:55.155 ipsec_setup: multiple ip addresses, using 192.168.178.32 on eth0 aug. 23 17:12:55.165 ipsec__plutorun: Starting Pluto subsystem... aug. 23 17:12:55.174 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d aug. 23 17:12:55.177 recvref[30]: Protocol not available aug. 23 17:12:55.177 xl2tpd[14339]: This binary does not support kernel L2TP. aug. 23 17:12:55.178 Starting xl2tpd: xl2tpd. aug. 23 17:12:55.178 xl2tpd[14345]: xl2tpd version xl2tpd-1.3.1 started on desktopmint PID:14345 aug. 23 17:12:55.178 xl2tpd[14345]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. aug. 23 17:12:55.179 xl2tpd[14345]: Forked by Scott Balmos and David Stipp, (C) 2001 aug. 23 17:12:55.179 xl2tpd[14345]: Inherited by Jeff McAdams, (C) 2002 aug. 23 17:12:55.179 xl2tpd[14345]: Forked again by Xelerance (www.xelerance.com) (C) 2006 aug. 23 17:12:55.180 xl2tpd[14345]: Listening on IP address 0.0.0.0, port 1701 aug. 23 17:12:55.214 ipsec__plutorun: 002 added connection description "Tunnel1" aug. 23 17:13:15.532 104 "Tunnel1" #1: STATE_MAIN_I1: initiate aug. 23 17:13:15.532 003 "Tunnel1" #1: ignoring unknown Vendor ID payload [4f45755c645c6a795c5c6170] aug. 23 17:13:15.532 003 "Tunnel1" #1: received Vendor ID payload [Dead Peer Detection] aug. 23 17:13:15.533 003 "Tunnel1" #1: received Vendor ID payload [RFC 3947] method set to=115 aug. 23 17:13:15.533 106 "Tunnel1" #1: STATE_MAIN_I2: sent MI2, expecting MR2 aug. 23 17:13:15.534 003 "Tunnel1" #1: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): i am NATed aug. 23 17:13:15.534 108 "Tunnel1" #1: STATE_MAIN_I3: sent MI3, expecting MR3 aug. 23 17:13:15.534 010 "Tunnel1" #1: STATE_MAIN_I3: retransmission; will wait 20s for response aug. 23 17:13:15.545 003 "Tunnel1" #1: received Vendor ID payload [CAN-IKEv2] aug. 23 17:13:15.547 004 "Tunnel1" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_128 prf=oakley_sha group=modp2048} aug. 23 17:13:15.547 117 "Tunnel1" #2: STATE_QUICK_I1: initiate aug. 23 17:13:15.547 010 "Tunnel1" #2: STATE_QUICK_I1: retransmission; will wait 20s for response aug. 23 17:13:15.548 004 "Tunnel1" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x0ecef28b <0x3e1fbe3b xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} aug. 23 17:13:16.549 xl2tpd[14345]: Connecting to host <VPN gateway>, port 1701 aug. 23 17:13:18.576 xl2tpd[14345]: Connection established to <VPN gateway>, 1701. Local: 21163, Remote: 12074 (ref=0/0). aug. 23 17:13:18.576 xl2tpd[14345]: Calling on tunnel 21163 aug. 23 17:13:18.577 xl2tpd[14345]: check_control: Received out of order control packet on tunnel 12074 (got 0, expected 1) aug. 23 17:13:18.577 xl2tpd[14345]: handle_packet: bad control packet! aug. 23 17:13:18.577 xl2tpd[14345]: check_control: Received out of order control packet on tunnel 12074 (got 0, expected 1) aug. 23 17:13:18.577 xl2tpd[14345]: handle_packet: bad control packet! aug. 23 17:13:18.599 xl2tpd[14345]: Call established with <VPN gateway>, Local: 39035, Remote: 57266, Serial: 1 (ref=0/0) aug. 23 17:13:18.605 xl2tpd[14345]: start_pppd: I'm running: aug. 23 17:13:18.605 xl2tpd[14345]: "/usr/sbin/pppd" aug. 23 17:13:18.606 xl2tpd[14345]: "passive" aug. 23 17:13:18.606 xl2tpd[14345]: "nodetach" aug. 23 17:13:18.606 xl2tpd[14345]: ":" aug. 23 17:13:18.606 xl2tpd[14345]: "file" aug. 23 17:13:18.606 xl2tpd[14345]: "/etc/ppp/Tunnel1.options.xl2tpd" aug. 23 17:13:18.606 xl2tpd[14345]: "ipparam" aug. 23 17:13:18.607 xl2tpd[14345]: "<VPN gateway>" aug. 23 17:13:18.607 xl2tpd[14345]: "/dev/pts/4" aug. 23 17:13:18.607 pppd[14438]: Plugin passprompt.so loaded. aug. 23 17:13:18.607 pppd[14438]: pppd 2.4.5 started by root, uid 0 aug. 23 17:13:18.608 pppd[14438]: Using interface ppp0 aug. 23 17:13:18.608 pppd[14438]: Connect: ppp0 <--> /dev/pts/4 aug. 23 17:13:21.650 pppd[14438]: CHAP authentication succeeded: Access granted aug. 23 17:13:21.651 pppd[14438]: CHAP authentication succeeded aug. 23 17:13:21.692 pppd[14438]: local IP address 10.1.2.2 aug. 23 17:13:21.693 pppd[14438]: remote IP address 10.1.2.1 aug. 23 17:13:21.693 pppd[14438]: primary DNS address 10.1.2.1 aug. 23 17:13:21.694 pppd[14438]: secondary DNS address 10.1.2.1 aug. 23 17:13:46.528 Stopping xl2tpd: xl2tpd. aug. 23 17:13:46.528 xl2tpd[14345]: death_handler: Fatal signal 15 received aug. 23 17:13:46.529 pppd[14438]: Modem hangup aug. 23 17:13:46.529 pppd[14438]: Connect time 0.5 minutes. aug. 23 17:13:46.529 pppd[14438]: Sent 1866 bytes, received 1241 bytes. aug. 23 17:13:46.529 pppd[14438]: Connection terminated. aug. 23 17:13:46.562 ipsec_setup: Stopping Openswan IPsec... aug. 23 17:13:46.576 pppd[14438]: Exit.

  Read the article

• Thread scheduling Round Robin / scheduling dispatch

  - by MRP

  #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <semaphore.h> #define NUM_THREADS 4 #define COUNT_LIMIT 13 int done = 0; int count = 0; int quantum = 2; int thread_ids[4] = {0,1,2,3}; int thread_runtime[4] = {0,5,4,7}; pthread_mutex_t count_mutex; pthread_cond_t count_threshold_cv; void * inc_count(void * arg); static sem_t count_sem; int quit = 0; ///////// Inc_Count//////////////// void *inc_count(void *t) { long my_id = (long)t; int i; sem_wait(&count_sem); /////////////CRIT SECTION////////////////////////////////// printf("run_thread = %d\n",my_id); printf("%d \n",thread_runtime[my_id]); for( i=0; i < thread_runtime[my_id];i++) { printf("runtime= %d\n",thread_runtime[my_id]); pthread_mutex_lock(&count_mutex); count++; if (count == COUNT_LIMIT) { pthread_cond_signal(&count_threshold_cv); printf("inc_count(): thread %ld, count = %d Threshold reached.\n", my_id, count); } printf("inc_count(): thread %ld, count = %d, unlocking mutex\n",my_id, count); pthread_mutex_unlock(&count_mutex); sleep(1) ; }//End For sem_post(&count_sem); // Next Thread Enters Crit Section pthread_exit(NULL); } /////////// Count_Watch //////////////// void *watch_count(void *t) { long my_id = (long)t; printf("Starting watch_count(): thread %ld\n", my_id); pthread_mutex_lock(&count_mutex); if (count<COUNT_LIMIT) { pthread_cond_wait(&count_threshold_cv, &count_mutex); printf("watch_count(): thread %ld Condition signal received.\n", my_id); printf("watch_count(): thread %ld count now = %d.\n", my_id, count); } pthread_mutex_unlock(&count_mutex); pthread_exit(NULL); } ////////////////// Main //////////////// int main (int argc, char *argv[]) { int i; long t1=0, t2=1, t3=2, t4=3; pthread_t threads[4]; pthread_attr_t attr; sem_init(&count_sem, 0, 1); /* Initialize mutex and condition variable objects */ pthread_mutex_init(&count_mutex, NULL); pthread_cond_init (&count_threshold_cv, NULL); /* For portability, explicitly create threads in a joinable state */ pthread_attr_init(&attr); pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE); pthread_create(&threads[0], &attr, watch_count, (void *)t1); pthread_create(&threads[1], &attr, inc_count, (void *)t2); pthread_create(&threads[2], &attr, inc_count, (void *)t3); pthread_create(&threads[3], &attr, inc_count, (void *)t4); /* Wait for all threads to complete */ for (i=0; i<NUM_THREADS; i++) { pthread_join(threads[i], NULL); } printf ("Main(): Waited on %d threads. Done.\n", NUM_THREADS); /* Clean up and exit */ pthread_attr_destroy(&attr); pthread_mutex_destroy(&count_mutex); pthread_cond_destroy(&count_threshold_cv); pthread_exit(NULL); } I am trying to learn thread scheduling, there is a lot of technical coding that I don't know. I do know in theory how it should work, but having trouble getting started in code... I know, at least I think, this program is not real time and its not meant to be. Some how I need to create a scheduler dispatch to control the threads in the order they should run... RR FCFS SJF ect. Right now I don't have a dispatcher. What I do have is semaphores/ mutex to control the threads. This code does run FCFS... and I have been trying to use semaphores to create a RR.. but having a lot of trouble. I believe it would be easier to create a dispatcher but I dont know how. I need help, I am not looking for answers just direction.. some sample code will help to understand a bit more. Thank you.

  Read the article

• Exim mail server slow on sending through SMTP

  - by catalint

  It takes about 30 seconds for the server to send me the banner, but initial connection is done instantly only happens when I am at the office, from home it works fine at the office I have a rRns set-up for my client ip that it's not working. Server: Exim, public fixed ip, rDNS, no ports blocked, in a datacenter Config: hostlist loopback = <; 127.0.0.0/8 ; 0.0.0.0 ; ::1 ; 0000:0000:0000:0000:0000:ffff:7f00:0000/8 hostlist senderverifybypass_hosts = net-iplsearch;/etc/senderverifybypasshosts hostlist skipsmtpcheck_hosts = net-iplsearch;/etc/skipsmtpcheckhosts hostlist spammeripblocks = net-iplsearch;/etc/spammeripblocks hostlist backupmx_hosts = lsearch;/etc/backupmxhosts hostlist trustedmailhosts = lsearch;/etc/trustedmailhosts domainlist user_domains = ${if exists{/etc/userdomains} {lsearch;/etc/userdomains} fail} This happens super fast on the server: 30132 ident connection to 89.238.207.49 failed: Connection refused 30132 sender_fullhost = [89.238.207.49] 30132 sender_rcvhost = [89.238.207.49] 30132 Process 30132 is handling incoming connection from [89.238.207.49] 30132 host in host_lookup? no (option unset) 30132 set_process_info: 30132 handling incoming connection from [89.238.207.49] 30132 host in host_reject_connection? no (option unset) 30132 host in sender_unqualified_hosts? no (option unset) 30132 host in recipient_unqualified_hosts? no (option unset) 30132 host in helo_verify_hosts? no (option unset) 30132 host in helo_try_verify_hosts? no (option unset) 30132 host in helo_accept_junk_hosts? yes (matched "*") 30132 using ACL "acl_connect" 30132 processing "accept" 30132 check hosts = +trustedmailhosts 30132 sender host name required, to match against lsearch;/etc/trustedmailhosts 30132 looking up host name for 89.238.207.49 30132 IP address lookup yielded relay.easycomm.ro Client side 2011.09.14 13:08:13 SMTP (mail.server.ro): Begin execution 2011.09.14 13:08:13 SMTP (mail.server.ro): Port: 465, Secure: SSL, SPA: no 2011.09.14 13:08:13 SMTP (mail.server.ro): Finding host 2011.09.14 13:08:13 SMTP (mail.server.ro): Connecting to host 2011.09.14 13:08:13 SMTP (mail.server.ro): Securing connection 2011.09.14 13:08:13 SMTP (mail.server.ro): Connected to host ---> This is a 1 minute 5 seconds gap 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 220-genius.filipnet.ro ESMTP Exim 4.69 #1 Wed, 14 Sep 2011 13:09:26 +0300 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 220-We do not authorize the use of this system to transport unsolicited, 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 220 and/or bulk e-mail. 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] EHLO CatalinDell 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-genius.filipnet.ro Hello CatalinDell [89.238.207.49] 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-SIZE 52428800 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-PIPELINING 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250-AUTH PLAIN LOGIN 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250 HELP 2011.09.14 13:09:18 SMTP (mail.server.ro): Authorizing to server 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] AUTH LOGIN 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 334 VXNlcm5hbWU6 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] dGVzdEBzcG9ydGd1cnUucm8= 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 334 UGFzc3dvcmQ6 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] ***** 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 235 Authentication succeeded 2011.09.14 13:09:18 SMTP (mail.server.ro): Authorized to host 2011.09.14 13:09:18 SMTP (mail.server.ro): Connected to host 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] MAIL FROM: <*****> 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250 OK 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] RCPT TO: <*****> 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 250 Accepted 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] DATA 2011.09.14 13:09:18 SMTP (mail.server.ro): <rx> 354 Enter message, ending with "." on a line by itself 2011.09.14 13:09:18 SMTP (mail.server.ro): [tx] . ---> This is a 1 minute 10 seconds gap 2011.09.14 13:10:28 SMTP (mail.server.ro): <rx> 250 OK id=1R3mPG-0004T4-7Q 2011.09.14 13:10:28 SMTP (mail.server.ro): End execution --- Initial info I've setup an email account on "Windows Live Mail" that comes with Windows 7 Receiving is super fast, but for some reason sending is very slow, I had to increase the outgoing timeout to 3 minutes in order to make it work. Server software is Exim / Dovecot / cPanel. Do you have any ideeas why there is a slow sending process? Thank you!

  Read the article

• Java ThreadPoolExecutor getting stuck while using ArrayBlockingQueue

  - by Ravi Rao

  Hi, I'm working on some application and using ThreadPoolExecutor for handling various tasks. ThreadPoolExecutor is getting stuck after some duration. To simulate this in a simpler environment, I've written a simple code where I'm able to simulate the issue. import java.util.concurrent.ArrayBlockingQueue; import java.util.concurrent.RejectedExecutionHandler; import java.util.concurrent.ThreadPoolExecutor; import java.util.concurrent.TimeUnit; public class MyThreadPoolExecutor { private int poolSize = 10; private int maxPoolSize = 50; private long keepAliveTime = 10; private ThreadPoolExecutor threadPool = null; private final ArrayBlockingQueue&lt;Runnable&gt; queue = new ArrayBlockingQueue&lt;Runnable&gt;( 100000); public MyThreadPoolExecutor() { threadPool = new ThreadPoolExecutor(poolSize, maxPoolSize, keepAliveTime, TimeUnit.SECONDS, queue); threadPool.setRejectedExecutionHandler(new RejectedExecutionHandler() { @Override public void rejectedExecution(Runnable runnable, ThreadPoolExecutor threadPoolExecutor) { System.out .println(&quot;Execution rejected. Please try restarting the application.&quot;); } }); } public void runTask(Runnable task) { threadPool.execute(task); } public void shutDown() { threadPool.shutdownNow(); } public ThreadPoolExecutor getThreadPool() { return threadPool; } public void setThreadPool(ThreadPoolExecutor threadPool) { this.threadPool = threadPool; } public static void main(String[] args) { MyThreadPoolExecutor mtpe = new MyThreadPoolExecutor(); for (int i = 0; i &lt; 1000; i++) { final int j = i; mtpe.runTask(new Runnable() { @Override public void run() { System.out.println(j); } }); } } } Try executing this code a few times. It normally print outs the number on console and when all threads end, it exists. But at times, it finished all task and then is not getting terminated. The thread dump is as follows: MyThreadPoolExecutor [Java Application] MyThreadPoolExecutor at localhost:2619 (Suspended) Daemon System Thread [Attach Listener] (Suspended) Daemon System Thread [Signal Dispatcher] (Suspended) Daemon System Thread [Finalizer] (Suspended) Object.wait(long) line: not available [native method] ReferenceQueue&lt;T&gt;.remove(long) line: not available ReferenceQueue&lt;T&gt;.remove() line: not available Finalizer$FinalizerThread.run() line: not available Daemon System Thread [Reference Handler] (Suspended) Object.wait(long) line: not available [native method] Reference$Lock(Object).wait() line: 485 Reference$ReferenceHandler.run() line: not available Thread [pool-1-thread-1] (Suspended) Unsafe.park(boolean, long) line: not available [native method] LockSupport.park(Object) line: not available AbstractQueuedSynchronizer$ConditionObject.await() line: not available ArrayBlockingQueue&lt;E&gt;.take() line: not available ThreadPoolExecutor.getTask() line: not available ThreadPoolExecutor$Worker.run() line: not available Thread.run() line: not available Thread [pool-1-thread-2] (Suspended) Unsafe.park(boolean, long) line: not available [native method] LockSupport.park(Object) line: not available AbstractQueuedSynchronizer$ConditionObject.await() line: not available ArrayBlockingQueue&lt;E&gt;.take() line: not available ThreadPoolExecutor.getTask() line: not available ThreadPoolExecutor$Worker.run() line: not available Thread.run() line: not available Thread [pool-1-thread-3] (Suspended) Unsafe.park(boolean, long) line: not available [native method] LockSupport.park(Object) line: not available AbstractQueuedSynchronizer$ConditionObject.await() line: not available ArrayBlockingQueue&lt;E&gt;.take() line: not available ThreadPoolExecutor.getTask() line: not available ThreadPoolExecutor$Worker.run() line: not available Thread.run() line: not available Thread [pool-1-thread-4] (Suspended) Unsafe.park(boolean, long) line: not available [native method] LockSupport.park(Object) line: not available AbstractQueuedSynchronizer$ConditionObject.await() line: not available ArrayBlockingQueue&lt;E&gt;.take() line: not available ThreadPoolExecutor.getTask() line: not available ThreadPoolExecutor$Worker.run() line: not available Thread.run() line: not available Thread [pool-1-thread-6] (Suspended) Unsafe.park(boolean, long) line: not available [native method] LockSupport.park(Object) line: not available AbstractQueuedSynchronizer$ConditionObject.await() line: not available ArrayBlockingQueue&lt;E&gt;.take() line: not available ThreadPoolExecutor.getTask() line: not available ThreadPoolExecutor$Worker.run() line: not available Thread.run() line: not available Thread [pool-1-thread-8] (Suspended) Unsafe.park(boolean, long) line: not available [native method] LockSupport.park(Object) line: not available AbstractQueuedSynchronizer$ConditionObject.await() line: not available ArrayBlockingQueue&lt;E&gt;.take() line: not available ThreadPoolExecutor.getTask() line: not available ThreadPoolExecutor$Worker.run() line: not available Thread.run() line: not available Thread [pool-1-thread-5] (Suspended) Unsafe.park(boolean, long) line: not available [native method] LockSupport.park(Object) line: not available AbstractQueuedSynchronizer$ConditionObject.await() line: not available ArrayBlockingQueue&lt;E&gt;.take() line: not available ThreadPoolExecutor.getTask() line: not available ThreadPoolExecutor$Worker.run() line: not available Thread.run() line: not available Thread [pool-1-thread-10] (Suspended) Unsafe.park(boolean, long) line: not available [native method] LockSupport.park(Object) line: not available AbstractQueuedSynchronizer$ConditionObject.await() line: not available ArrayBlockingQueue&lt;E&gt;.take() line: not available ThreadPoolExecutor.getTask() line: not available ThreadPoolExecutor$Worker.run() line: not available Thread.run() line: not available Thread [pool-1-thread-9] (Suspended) Unsafe.park(boolean, long) line: not available [native method] LockSupport.park(Object) line: not available AbstractQueuedSynchronizer$ConditionObject.await() line: not available ArrayBlockingQueue&lt;E&gt;.take() line: not available ThreadPoolExecutor.getTask() line: not available ThreadPoolExecutor$Worker.run() line: not available Thread.run() line: not available Thread [pool-1-thread-7] (Suspended) Unsafe.park(boolean, long) line: not available [native method] LockSupport.park(Object) line: not available AbstractQueuedSynchronizer$ConditionObject.await() line: not available ArrayBlockingQueue&lt;E&gt;.take() line: not available ThreadPoolExecutor.getTask() line: not available ThreadPoolExecutor$Worker.run() line: not available Thread.run() line: not available Thread [DestroyJavaVM] (Suspended) C:\Program Files\Java\jre1.6.0_07\bin\javaw.exe (Jun 17, 2010 10:42:33 AM) In my actual application,ThreadPoolExecutor threads go in this state and then it stops responding. Regards, Ravi Rao

  Read the article

• Crash when trying to get NSManagedObject from NSFetchedResultsController after 25 objects?

  - by Jeremy

  Hey everyone, I'm relatively new to Core Data on iOS, but I think I've been getting better with it. I've been experiencing a bizarre crash, however, in one of my applications and have not been able to figure it out. I have approximately 40 objects in Core Data, presented in a UITableView. When tapping on a cell, a UIActionSheet appears, presenting the user with a UIActionSheet with options related to the cell that was selected. So that I can reference the selected object, I declare an NSIndexPath in my header called "lastSelection" and do the following when the UIActionSheet is presented: // Each cell has a tag based on its row number (i.e. first row has tag 0) lastSelection = [NSIndexPath indexPathForRow:[sender tag] inSection:0]; NSManagedObject *managedObject = [self.fetchedResultsController objectAtIndexPath:lastSelection]; BOOL onDuty = [[managedObject valueForKey:@"onDuty"] boolValue]; UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:@"Status" delegate:self cancelButtonTitle:nil destructiveButtonTitle:nil otherButtonTitles:nil]; if(onDuty) { [actionSheet addButtonWithTitle:@"Off Duty"]; } else { [actionSheet addButtonWithTitle:@"On Duty"]; } actionSheet.actionSheetStyle = UIActionSheetStyleBlackOpaque; // Override the typical UIActionSheet behavior by presenting it overlapping the sender's frame. This makes it more clear which cell is selected. CGRect senderFrame = [sender frame]; CGPoint point = CGPointMake(senderFrame.origin.x + (senderFrame.size.width / 2), senderFrame.origin.y + (senderFrame.size.height / 2)); CGRect popoverRect = CGRectMake(point.x, point.y, 1, 1); [actionSheet showFromRect:popoverRect inView:[sender superview] animated:NO]; [actionSheet release]; When the UIActionSheet is dismissed with a button, the following code is called: - (void)actionSheet:(UIActionSheet *)actionSheet willDismissWithButtonIndex:(NSInteger)buttonIndex { // Set status based on UIActionSheet button pressed if(buttonIndex == -1) { return; } NSManagedObject *managedObject = [self.fetchedResultsController objectAtIndexPath:lastSelection]; if([actionSheet.title isEqualToString:@"Status"]) { if([[actionSheet buttonTitleAtIndex:buttonIndex] isEqualToString:@"On Duty"]) { [managedObject setValue:[NSNumber numberWithBool:YES] forKey:@"onDuty"]; [managedObject setValue:@"onDuty" forKey:@"status"]; } else { [managedObject setValue:[NSNumber numberWithBool:NO] forKey:@"onDuty"]; [managedObject setValue:@"offDuty" forKey:@"status"]; } } NSError *error; [self.managedObjectContext save:&error]; [tableView reloadData]; } This might not be the most efficient code (sorry, I'm new!), but it does work. That is, for the first 25 items in the list. Selecting the 26th item or beyond, the UIActionSheet will appear, but if it is dismissed with a button, I get a variety of errors, including any one of the following: [__NSCFArray section]: unrecognized selector sent to instance 0x4c6bf90 Program received signal: “EXC_BAD_ACCESS” [_NSObjectID_48_0 section]: unrecognized selector sent to instance 0x4c54710 [__NSArrayM section]: unrecognized selector sent to instance 0x4c619a0 [NSComparisonPredicate section]: unrecognized selector sent to instance 0x6088790 [NSKeyPathExpression section]: unrecognized selector sent to instance 0x4c18950 If I comment out NSManagedObject *managedObject = [self.fetchedResultsController objectAtIndexPath:lastSelection]; it doesn't crash anymore, so I believe it has something do do with that. Can anyone offer any insight? Please let me know if I need to include any other information. Thanks! EDIT: Interestingly, my fetchedResultsController code returns a different object every time. Is this expected, or could this be a cause of my issue? The code looks like this: - (NSFetchedResultsController *)fetchedResultsController { /* Set up the fetched results controller. */ // Create the fetch request for the entity. NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init]; // Edit the entity name as appropriate. NSEntityDescription *entity = [NSEntityDescription entityForName:@"Employee" inManagedObjectContext:self.managedObjectContext]; [fetchRequest setEntity:entity]; // Set the batch size to a suitable number. [fetchRequest setFetchBatchSize:80]; // Edit the sort key as appropriate. NSString *sortKey; BOOL ascending; if(sortControl.selectedSegmentIndex == 0) { sortKey = @"startTime"; ascending = YES; } else if(sortControl.selectedSegmentIndex == 1) { sortKey = @"name"; ascending = YES; } else { sortKey = @"onDuty"; ascending = NO; } NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:sortKey ascending:ascending]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [fetchRequest setSortDescriptors:sortDescriptors]; // Edit the section name key path and cache name if appropriate. NSFetchedResultsController *aFetchedResultsController = [[NSFetchedResultsController alloc] initWithFetchRequest:fetchRequest managedObjectContext:self.managedObjectContext sectionNameKeyPath:nil cacheName:@"Root"]; aFetchedResultsController.delegate = self; self.fetchedResultsController = aFetchedResultsController; [aFetchedResultsController release]; [fetchRequest release]; [sortDescriptor release]; [sortDescriptors release]; NSError *error = nil; if (![fetchedResultsController_ performFetch:&error]) { /* Replace this implementation with code to handle the error appropriately. abort() causes the application to generate a crash log and terminate. You should not use this function in a shipping application, although it may be useful during development. If it is not possible to recover from the error, display an alert panel that instructs the user to quit the application by pressing the Home button. */ //NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } return fetchedResultsController_; } This happens when I set a breakpoint: (gdb) po [self fetchedResultsController] <NSFetchedResultsController: 0x61567c0> (gdb) po [self fetchedResultsController] <NSFetchedResultsController: 0x4c83630>

  Read the article

• Solving Slow Query

  - by Chris

  We are installing a new forum (yaf) for our site. One of the stored procedures is extremely slow - in fact it always times out in the browser. If I run it in MSSMS it takes nearly 10 minutes to complete. Is there a way to find out what part of this query if taking so long? The Query: DECLARE @BoardID int DECLARE @UserID int DECLARE @CategoryID int = null DECLARE @ParentID int = null SET @BoardID = 1 SET @UserID = 2 select a.CategoryID, Category = a.Name, ForumID = b.ForumID, Forum = b.Name, Description, Topics = [dbo].[yaf_forum_topics](b.ForumID), Posts = [dbo].[yaf_forum_posts](b.ForumID), Subforums = [dbo].[yaf_forum_subforums](b.ForumID, @UserID), LastPosted = t.LastPosted, LastMessageID = t.LastMessageID, LastUserID = t.LastUserID, LastUser = IsNull(t.LastUserName,(select Name from [dbo].[yaf_User] x where x.UserID=t.LastUserID)), LastTopicID = t.TopicID, LastTopicName = t.Topic, b.Flags, Viewing = (select count(1) from [dbo].[yaf_Active] x JOIN [dbo].[yaf_User] usr ON x.UserID = usr.UserID where x.ForumID=b.ForumID AND usr.IsActiveExcluded = 0), b.RemoteURL, x.ReadAccess from [dbo].[yaf_Category] a join [dbo].[yaf_Forum] b on b.CategoryID=a.CategoryID join [dbo].[yaf_vaccess] x on x.ForumID=b.ForumID left outer join [dbo].[yaf_Topic] t ON t.TopicID = [dbo].[yaf_forum_lasttopic](b.ForumID,@UserID,b.LastTopicID,b.LastPosted) where a.BoardID = @BoardID and ((b.Flags & 2)=0 or x.ReadAccess<>0) and (@CategoryID is null or a.CategoryID=@CategoryID) and ((@ParentID is null and b.ParentID is null) or b.ParentID=@ParentID) and x.UserID = @UserID order by a.SortOrder, b.SortOrder IO Statistics: Table 'Worktable'. Scan count 0, logical reads 0, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'yaf_Active'. Scan count 14, logical reads 28, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'yaf_User'. Scan count 0, logical reads 3, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'yaf_Topic'. Scan count 0, logical reads 0, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'yaf_Category'. Scan count 0, logical reads 28, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'yaf_Forum'. Scan count 0, logical reads 488, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'yaf_UserGroup'. Scan count 231, logical reads 693, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'Worktable'. Scan count 0, logical reads 0, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'yaf_ForumAccess'. Scan count 1, logical reads 2, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'yaf_AccessMask'. Scan count 1, logical reads 2, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'yaf_UserForum'. Scan count 1, logical reads 0, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Client Statistics: Client Execution Time 11:54:01 Query Profile Statistics Number of INSERT, DELETE and UPDATE statements 0 0.0000 Rows affected by INSERT, DELETE, or UPDATE statements 0 0.0000 Number of SELECT statements 8 8.0000 Rows returned by SELECT statements 19 19.0000 Number of transactions 0 0.0000 Network Statistics Number of server roundtrips 3 3.0000 TDS packets sent from client 3 3.0000 TDS packets received from server 34 34.0000 Bytes sent from client 3166 3166.0000 Bytes received from server 128802 128802.0000 Time Statistics Client processing time 156478 156478.0000 Total execution time 572009 572009.0000 Wait time on server replies 415531 415531.0000 Execution Plan

  Read the article

• Ethernet Communication Error

  - by SivaKumar

  Hi, I wrote a program to query the status of the Ethernet printer for that i created a TCP Stream Socket and i send the query command to the printer.In case of Error less condition it returns No error status but in error case its getting hang at recv command.Even i used Non blocking now the recv command returns nothing and error set as Resource temporarily unavailable. code: #include <stdio.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <netdb.h> #include <string.h> #include <unistd.h> #include <arpa/inet.h> #include <errno.h> #include <stdlib.h> #include <fcntl.h> #include <sys/ioctl.h> #include <sys/socket.h> #include <signal.h> #include <termios.h> #include <poll.h> #include <netinet/tcp.h> #include <stdarg.h> int main() { int ConnectSocket,ConnectSocket1,select_err,err,nRet,nBytesRead; struct timeval waitTime = {10,30}; fd_set socket_set; unsigned char * dataBuf = NULL; unsigned char tempVar, tempVar1, tempVar2, tempVar3; char reset[] = "\033E 2\r"; char print[] = "\033A 1\r"; char buf[1024]={0}; ConnectSocket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); printf("The Socket ID is %d\n",ConnectSocket); if (ConnectSocket < 0) { perror("socket()"); return 0; } struct sockaddr_in clientService; clientService.sin_family = AF_INET; clientService.sin_addr.s_addr = inet_addr("192.168.0.129"); //Printer IP clientService.sin_port = htons( 9100); // Printer Port if ( connect( ConnectSocket, (struct sockaddr*) &clientService, sizeof(clientService) ) == -1) { perror("connect()"); close(ConnectSocket); return -1; } /* if((nRet = ioctl(ConnectSocket , FIONREAD, &nBytesRead) == -1)) { perror("ioctl()"); } perror("ioctl()"); */ FD_ZERO(&socket_set); FD_SET(ConnectSocket, &socket_set); do { errno=0; select_err = select(ConnectSocket+1, NULL, &socket_set, NULL, &waitTime); }while(errno==EINPROGRESS); if (-1 == select_err || 0 == select_err) { int optVal = 0; int optLen = sizeof(optVal); if(select_err == -1) { perror("select() write-side"); } else { //Timeout errno=0; err = getsockopt(ConnectSocket, SOL_SOCKET, SO_ERROR, (char*)&optVal, &optLen); printf("the return of the getsockopt is %d\n",err); printf("the opt val is %s\n",(char*)optVal); perror("getsockopt()"); if(err == -1) { perror("getsockopt() write-side"); } } printf("Select Failed during write - ConnectSocket: %d\n", ConnectSocket); //close(ConnectSocket); return -1; } err = send(ConnectSocket,print,sizeof(print)-1, 0); printf("\n No of Bytes Send is %d\n",err); if(err == -1 || err ==0) { perror("send()"); //close(ConnectSocket); return -1; } FD_ZERO(&socket_set); FD_SET(ConnectSocket, &socket_set); do { errno=0; select_err = select(ConnectSocket+1, NULL, &socket_set, NULL, &waitTime); }while(errno==EINPROGRESS); if (-1 == select_err || 0 == select_err) { printf("Select Failed during write - ConnectSocket: %d\n", ConnectSocket); return -1; } err = send(ConnectSocket,reset,sizeof(reset)-1, 0); printf("\n No of Bytes Send is %d\n",err); if(err == -1 || err ==0) { perror("send()"); //close(ConnectSocket); return -1; } FD_ZERO(&socket_set); FD_SET(ConnectSocket, &socket_set); printf("i am in reading \n"); select_err = select(ConnectSocket+1, &socket_set, NULL, NULL, &waitTime); printf("the retun of the read side select is %d \n",select_err); perror("select()"); if (-1 == select_err|| 0 == select_err) { printf("Read timeout; ConnectSocket: %d\n", ConnectSocket); close(ConnectSocket); perror("close()"); return -1; } printf("Before Recv\n"); nBytesRead = recv(ConnectSocket , buf, 1024, 0); printf("No of Bytes read is %d\n",nBytesRead); printf("%s\n",buf); if(nBytesRead == -1) { perror("recv()"); close(ConnectSocket); perror("clode()"); return -1; } close(ConnectSocket); return 1; }

  Read the article

• Can't get heroku work with rails 3.x postgresql

  - by framomo86

  I followed Heroku official guides to push rails project to heroku. The application.rb file is ok, I added pg gem and database.yml in the right way. When I push to heroku I get: -----> Preparing app for Rails asset pipeline Detected manifest.yml, assuming assets were compiled locally But when I open heroku via heroku open I get an error. I put heroku logs and get this. Started GET "/" for 93.45.227.255 at 2012-10-11 13:28:04 +0000 2012-10-11T13:28:04+00:00 app[web.1]: Processing by ProductsController#index as HTML 2012-10-11T13:28:04+00:00 app[web.1]: : SELECT a.attname, format_type(a.atttypid, a.atttypmod), d.adsrc, a.attnotnull 2012-10-11T13:28:04+00:00 app[web.1]: ActiveRecord::StatementInvalid (PG::Error: ERROR: relation "products" does not exist 2012-10-11T13:28:04+00:00 app[web.1]: LINE 4: WHERE a.attrelid = '"products"'::regclass 2012-10-11T13:28:04+00:00 heroku[router]: GET gift4.herokuapp.com/ dyno=web.1 queue=0 wait=0ms service=203ms status=500 bytes=643 2012-10-11T13:28:04+00:00 app[web.1]: ): 2012-10-11T13:28:04+00:00 app[web.1]: ON a.attrelid = d.adrelid AND a.attnum = d.adnum 2012-10-11T13:28:04+00:00 app[web.1]: 2012-10-11T13:28:04+00:00 app[web.1]: 2012-10-11T13:28:04+00:00 app[web.1]: ^ 2012-10-11T13:28:04+00:00 app[web.1]: 2012-10-11T13:28:04+00:00 app[web.1]: Completed 500 Internal Server Error in 72ms 2012-10-11T13:28:04+00:00 app[web.1]: FROM pg_attribute a LEFT JOIN pg_attrdef d 2012-10-11T13:28:04+00:00 app[web.1]: WHERE a.attrelid = '"products"'::regclass 2012-10-11T13:28:04+00:00 app[web.1]: AND a.attnum > 0 AND NOT a.attisdropped 2012-10-11T13:28:04+00:00 app[web.1]: ORDER BY a.attnum 2012-10-11T13:28:04+00:00 app[web.1]: app/controllers/products_controller.rb:5:in `index' 2012-10-11T13:28:04+00:00 heroku[router]: GET gift4.herokuapp.com/favicon.ico d So I tried heroku run rake db:reset And get this Heroku client internal error. ! Search for help at: https://help.heroku.com ! Or report a bug at: https://github.com/heroku/heroku/issues/new Error: Operation timed out - connect(2) (Errno::ETIMEDOUT) Backtrace: /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/client/rendezvous.rb:39:in `initialize' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/client/rendezvous.rb:39:in `open' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/client/rendezvous.rb:39:in `block in start' /Users/francescochecco/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/timeout.rb:68:in `timeout' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/client/rendezvous.rb:31:in `start' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/command/run.rb:125:in `rendezvous_session' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/command/run.rb:112:in `run_attached' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/command/run.rb:21:in `index' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/command.rb:206:in `run' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/cli.rb:28:in `start' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/bin/heroku:16:in `<top (required)>' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/bin/heroku:19:in `load' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/bin/heroku:19:in `<main>' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/bin/ruby_noexec_wrapper:14:in `eval' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/bin/ruby_noexec_wrapper:14:in `<main>' Command: heroku run rake db:reset Version: heroku-gem/2.32.6 (x86_64-darwin11.3.0) ruby/1.9.3 autoupdate I tried everything. Anyone could help?

  Read the article

• HttpWebRequest: How to find a postal code at Canada Post through a WebRequest with x-www-form-enclos

  - by Will Marcouiller

  I'm currently writing some tests so that I may improve my skills with the Internet interaction through Windows Forms. One of those tests is to find a postal code which should be returned by Canada Post website. My default URL setting is set to: http://www.canadapost.ca/cpotools/apps/fpc/personal/findByCity?execution=e4s1 The required form fields are: streetNumber, streetName, city, province The contentType is "application/x-www-form-enclosed" EDIT: Please consider the value "application/x-www-form-encoded" instead of point 3 value as the contentType. (Thanks EricLaw-MSFT!) The result I get is not the result expected. I get the HTML source code of the page where I could manually enter the information to find the postal code, but not the HTML source code with the found postal code. Any idea of what I'm doing wrong? Shall I consider going the XML way? Is it first of all possible to search on Canada Post anonymously? Here's a code sample for better description: public static string FindPostalCode(ICanadadianAddress address) { var postData = string.Concat(string.Format("&streetNumber={0}", address.StreetNumber) , string.Format("&streetName={0}", address.StreetName) , string.Format("&city={0}", address.City) , string.Format("&province={0}", address.Province)); var encoding = new ASCIIEncoding(); byte[] postDataBytes = encoding.GetBytes(postData); request = (HttpWebRequest)WebRequest.Create(DefaultUrlSettings); request.ImpersonationLevel = System.Security.Principal.TokenImpersonationLevel.Anonymous; request.Container = new CookieContainer(); request.Timeout = 10000; request.ContentType = contentType; request.ContentLength = postDataBytes.LongLength; request.Method = @"post"; var senderStream = new StreamWriter(request.GetRequestStream()); senderStream.Write(postDataBytes, 0, postDataBytes.Length); senderStream.Close(); string htmlResponse = new StreamReader(request.GetResponse().GetResponseStream()).ReadToEnd(); return processedResult(htmlResponse); // Processing the HTML source code parsing, etc. } I seem stuck in a bottle neck in my point of view. I find no way out to the desired result. EDIT: There seems to have to parameters as for the ContentType of this site. Let me explain. There's one with the "meta"-variables which stipulates the following: meta http-equiv="Content-Type" content="application/xhtml+xml, text/xml, text/html; charset=utf-8" And another one later down the code that is read as: form id="fpcByAdvancedSearch:fpcSearch" name="fpcByAdvancedSearch:fpcSearch" method="post" action="/cpotools/apps/fpc/personal/findByCity?execution=e1s1" enctype="application/x-www-form-urlencoded" My question is the following: With which one do I have to stick? Let me guess, the first ContentType is to be considered as the second is only for another request to a function or so when the data is posted? EDIT: As per request, the closer to the solution I am is listed under this question: WebRequest: How to find a postal code using a WebRequest against this ContentType=”application/xhtml+xml, text/xml, text/html; charset=utf-8”? Thanks for any help! :-)

  Read the article

• Web service using Data Dynamics ActiveReports occasionally slows down

  - by Swoop

  My company is running into a problem with a web service that is written in C#/ASP.Net. The service receives an identity key for data in SQL Server and a path to generate and save a PDF report for this data. In most cases, this web service returns results to the calling web pages very quickly, usually within a few seconds max. However, it seems to occasionally hit a significant slowdown. The web application calling the web service will generate a timeout error when this slowdown occurs. We have checked and the PDF does get created and saved to the server, so it looks like the web service eventually finishes executing. It seems to take about 1 to 2 minutes for processing to have completed. The PDF is generated using ActiveReports from Data Dynamics. Wwhen this problem occurs, making a small change to the web service's config file (ie, adding a blank space to a connection string line) seems to restart the web service and everything is perfectly ok for a period of time afterwards. Other web applications that are running on the same web server do not seem to experience this type of behavior, only this particular web service. I have added the code for the web service below. It is basic calls to 3rd party libraries. We are not able to recreate this problem in test. I am wondering what might be causing this issue? [WebMethod] public string Publish(int identity, string transactionType, string directory, string filename) { try { AdpConnection Conn = new AdpConnection(ConfigurationManager.AppSettings["myDBConnString"]); AdpCommand Cmd = new AdpCommand("storedproc_GetData", oConn); AdpParameter Param; Cmd.CommandType = CommandType.StoredProcedure; Param = Cmd.CreateParameter("@Identity", DbType.Int32); Param.Value = identity; Cmd.Parameters.Add(oParam); Conn.Open(); string aResponse = Cmd.ExecuteScalar().ToString(); Conn.Close(); if (transactionType == "typeA") { //Parse response DataSet dsResponse = ParseDataResponse(aResponse); //dsResponse.WriteXml(@ConfigurationManager.AppSettings["DocsDir"] + identity.ToString() + ".xml"); DataDynamics.ActiveReports.ActiveReport3 rpt = new DataDynamics.ActiveReports.ActiveReport3(); rpt.LoadLayout(@ConfigurationManager.AppSettings["myReportPath"] + "TypeA.rpx"); rpt.AddNamedItem("ReportPath", @ConfigurationManager.AppSettings["myReportPath"]); rpt.AddNamedItem("XMLSTRING", FormatXML(dsResponse.GetXml())); DataDynamics.ActiveReports.DataSources.XMLDataSource xmlds = new DataDynamics.ActiveReports.DataSources.XMLDataSource(); xmlds.FileURL = null; xmlds.RecordsetPattern = "//DataPatternA"; xmlds.LoadXML(FormatXML(dsResponse.GetXml())); if (!System.IO.Directory.Exists(@ConfigurationManager.AppSettings["DocsDir"] + directory + @"\")) { System.IO.Directory.CreateDirectory(@ConfigurationManager.AppSettings["DocsDir"] + directory + @"\"); } string sXML = FormatXML(dsResponse.GetXml()); StreamWriter sw = new StreamWriter(@ConfigurationManager.AppSettings["DocsDir"] + directory + @"\" + filename + ".xml", false); sw.Write(sXML); sw.Close(); rpt.DataSource = xmlds; rpt.Run(true); DataDynamics.ActiveReports.Export.Pdf.PdfExport xPdf = new DataDynamics.ActiveReports.Export.Pdf.PdfExport(); xPdf.Export(rpt.Document, @ConfigurationManager.AppSettings["DocsDir"] + directory + @"\" + filename + ".pdf"); } } catch(Exception ex) { return "Error: " + ex.ToString(); } return @ConfigurationManager.AppSettings["DocsDir"] + directory + @"\" + filename + ".pdf"; }

  Read the article

• Block filters using fragment shaders

  - by Nils

  I was following this tutorial using Apple's OpenGL Shader Builder (tool similar to Nvidia's fx composer, but simpler). I could easily apply the filters, but I don't understand if they worked correct (and if so how can I improve the output). For example the blur filter: OpenGL itself does some image processing on the textures, so if they are displayed in a higher resolution than the original image, they are blurred already by OpenGL. Second the blurred part is brighter then the part not processed, I think this does not make sense, since it just takes pixels from the direct neighborhood. This is defined by float step_w = (1.0/width); Which I don't quite understand: The pixels are indexed using floating point values?? Edit: I forgot to attach the exact code I used: Fragment Shader // Originally taken from: http://www.ozone3d.net/tutorials/image_filtering_p2.php#part_2 #define KERNEL_SIZE 9 float kernel[KERNEL_SIZE]; uniform sampler2D colorMap; uniform float width; uniform float height; float step_w = (1.0/width); float step_h = (1.0/height); // float step_w = 20.0; // float step_h = 20.0; vec2 offset[KERNEL_SIZE]; void main(void) { int i = 0; vec4 sum = vec4(0.0); offset[0] = vec2(-step_w, -step_h); // south west offset[1] = vec2(0.0, -step_h); // south offset[2] = vec2(step_w, -step_h); // south east offset[3] = vec2(-step_w, 0.0); // west offset[4] = vec2(0.0, 0.0); // center offset[5] = vec2(step_w, 0.0); // east offset[6] = vec2(-step_w, step_h); // north west offset[7] = vec2(0.0, step_h); // north offset[8] = vec2(step_w, step_h); // north east // Gaussian kernel // 1 2 1 // 2 4 2 // 1 2 1 kernel[0] = 1.0; kernel[1] = 2.0; kernel[2] = 1.0; kernel[3] = 2.0; kernel[4] = 4.0; kernel[5] = 2.0; kernel[6] = 1.0; kernel[7] = 2.0; kernel[8] = 1.0; // TODO make grayscale first // Laplacian Filter // 0 1 0 // 1 -4 1 // 0 1 0 /* kernel[0] = 0.0; kernel[1] = 1.0; kernel[2] = 0.0; kernel[3] = 1.0; kernel[4] = -4.0; kernel[5] = 1.0; kernel[6] = 0.0; kernel[7] = 2.0; kernel[8] = 0.0; */ // Mean Filter // 1 1 1 // 1 1 1 // 1 1 1 /* kernel[0] = 1.0; kernel[1] = 1.0; kernel[2] = 1.0; kernel[3] = 1.0; kernel[4] = 1.0; kernel[5] = 1.0; kernel[6] = 1.0; kernel[7] = 1.0; kernel[8] = 1.0; */ if(gl_TexCoord[0].s<0.5) { // For every pixel sample the neighbor pixels and sum up for( i=0; i<KERNEL_SIZE; i++ ) { // select the pixel with the concerning offset vec4 tmp = texture2D(colorMap, gl_TexCoord[0].st + offset[i]); sum += tmp * kernel[i]; } sum /= 16.0; } else if( gl_TexCoord[0].s>0.51 ) { sum = texture2D(colorMap, gl_TexCoord[0].xy); } else // Draw a red line { sum = vec4(1.0, 0.0, 0.0, 1.0); } gl_FragColor = sum; } Vertex Shader void main(void) { gl_TexCoord[0] = gl_MultiTexCoord0; gl_Position = ftransform(); }

  Read the article

• Neo4j OutOfMemory problem

  - by Edward83

  Hi! This is my source code of Main.java. It was grabbed from neo4j-apoc-1.0 examples. The goal of modification to store 1M records of 2 nodes and 1 relation: package javaapplication2; import org.neo4j.graphdb.GraphDatabaseService; import org.neo4j.graphdb.Node; import org.neo4j.graphdb.RelationshipType; import org.neo4j.graphdb.Transaction; import org.neo4j.kernel.EmbeddedGraphDatabase; public class Main { private static final String DB_PATH = "neo4j-store-1M"; private static final String NAME_KEY = "name"; private static enum ExampleRelationshipTypes implements RelationshipType { EXAMPLE } public static void main(String[] args) { GraphDatabaseService graphDb = null; try { System.out.println( "Init database..." ); graphDb = new EmbeddedGraphDatabase( DB_PATH ); registerShutdownHook( graphDb ); System.out.println( "Start of creating database..." ); int valIndex = 0; for(int i=0; i<1000; ++i) { for(int j=0; j<1000; ++j) { Transaction tx = graphDb.beginTx(); try { Node firstNode = graphDb.createNode(); firstNode.setProperty( NAME_KEY, "Hello" + valIndex ); Node secondNode = graphDb.createNode(); secondNode.setProperty( NAME_KEY, "World" + valIndex ); firstNode.createRelationshipTo( secondNode, ExampleRelationshipTypes.EXAMPLE ); tx.success(); ++valIndex; } finally { tx.finish(); } } } System.out.println("Ok, client processing finished!"); } finally { System.out.println( "Shutting down database ..." ); graphDb.shutdown(); } } private static void registerShutdownHook( final GraphDatabaseService graphDb ) { // Registers a shutdown hook for the Neo4j instance so that it // shuts down nicely when the VM exits (even if you "Ctrl-C" the // running example before it's completed) Runtime.getRuntime().addShutdownHook( new Thread() { @Override public void run() { graphDb.shutdown(); } } ); } } After a few iterations (around 150K) I got error message: "java.lang.OutOfMemoryError: Java heap space at java.nio.HeapByteBuffer.(HeapByteBuffer.java:39) at java.nio.ByteBuffer.allocate(ByteBuffer.java:312) at org.neo4j.kernel.impl.nioneo.store.PlainPersistenceWindow.(PlainPersistenceWindow.java:30) at org.neo4j.kernel.impl.nioneo.store.PersistenceWindowPool.allocateNewWindow(PersistenceWindowPool.java:534) at org.neo4j.kernel.impl.nioneo.store.PersistenceWindowPool.refreshBricks(PersistenceWindowPool.java:430) at org.neo4j.kernel.impl.nioneo.store.PersistenceWindowPool.acquire(PersistenceWindowPool.java:122) at org.neo4j.kernel.impl.nioneo.store.CommonAbstractStore.acquireWindow(CommonAbstractStore.java:459) at org.neo4j.kernel.impl.nioneo.store.AbstractDynamicStore.updateRecord(AbstractDynamicStore.java:240) at org.neo4j.kernel.impl.nioneo.store.PropertyStore.updateRecord(PropertyStore.java:209) at org.neo4j.kernel.impl.nioneo.xa.Command$PropertyCommand.execute(Command.java:513) at org.neo4j.kernel.impl.nioneo.xa.NeoTransaction.doCommit(NeoTransaction.java:443) at org.neo4j.kernel.impl.transaction.xaframework.XaTransaction.commit(XaTransaction.java:316) at org.neo4j.kernel.impl.transaction.xaframework.XaResourceManager.commit(XaResourceManager.java:399) at org.neo4j.kernel.impl.transaction.xaframework.XaResourceHelpImpl.commit(XaResourceHelpImpl.java:64) at org.neo4j.kernel.impl.transaction.TransactionImpl.doCommit(TransactionImpl.java:514) at org.neo4j.kernel.impl.transaction.TxManager.commit(TxManager.java:571) at org.neo4j.kernel.impl.transaction.TxManager.commit(TxManager.java:543) at org.neo4j.kernel.impl.transaction.TransactionImpl.commit(TransactionImpl.java:102) at org.neo4j.kernel.EmbeddedGraphDbImpl$TransactionImpl.finish(EmbeddedGraphDbImpl.java:329) at javaapplication2.Main.main(Main.java:62) 28.05.2010 9:52:14 org.neo4j.kernel.impl.nioneo.store.PersistenceWindowPool logWarn WARNING: [neo4j-store-1M\neostore.propertystore.db.strings] Unable to allocate direct buffer" Guys! Help me plzzz, what I did wrong, how can I repair it? Tested on platform Windows XP 32bit SP3. Maybe solution within creation custom configuration? thnx 4 every advice!

  Read the article

• Mobile App Data Syncronization

  - by Matt Rogish

  Let's say I have a mobile app that uses HTML5 SQLite DB (and/or the HTML5 key-value store). Assets (media files, PDFs, etc.) are stored locally on the mobile device. Luckily enough, the mobile device is a read-only copy of the "centralized" storage, so the mobile device won't have to propagate changes upstream. However, as the server changes assets (creates new ones, modifies existing, deletes old ones) I need to propagate those changes back to the mobile app. Assume that server changes are grouped into changesets (version number n) that contain some information (added element XYZ, deleted id = 45, etc.) and that the mobile device has limited CPU/bandwidth, so most of the processing has to take place on the server. I can think of a couple of methods to do this. All have trade-offs and at this point, I'm unsure which is the right course of action... Method 1: For change set n, store the "diff" of the current n and previous n-1. When a client with version y asks if there have been any changes, send the change sets from version y up to the current version. e.g. added item 334, contents: xxx. Deleted picture 44. Deleted PDF 11. Changed 33. added picture 99. Characteristics: Diffs take up space, although in theory would be kept small. However, all diffs must be kept around indefinitely (should a v1 app have not been updated for a year, must apply v2..v100). High latency devices (mobile apps) will incur a penalty to send lots of small files (assume cannot be zipped or tarr'd up into one file) Very few server CPU resources required, as all it does is send the client a list of files "Dumb" - if I change an item in change set 3, and change it to something else in 4, the client is going to perform both actions, even though #3 is rendered moot by #4. Or, if an asset is added in #4 and removed in #5 - the client will download a file just to delete it later. Method 2: Very similar to method 1 except on the server, do some sort of a diff between the change sets represented by the app version and server version. Package that up and send that single change set to the client. Characteristics: Client-efficient: The client only has to process one file, duplicate or irrelevant changes are stripped out. Server CPU/space intensive. The change sets must be diff'd and then written out to a file that is then sent to the client. Makes diff server scalability an issue. Possibly ways to cache the results and re-use them, but in the wild there's likely to be a lot of different versions so the diff re-use has a limit Diff algorithm is complicated. The change sets must be structured in such a way that an efficient and effective diff can be performed. Method 3: Instead of keeping diffs, write out the entire versioned asset collection to a mobile-database import file. When client requests an update, send the entire database to client and have them update their assets appropriately. Characteristics: Conceptually simple -- easy to develop and deploy Very inefficient as the client database is restored every update. If only one new thing was added, the whole database is refreshed. Server space and CPU efficient. Only the latest version DB needs kept around and the server just throws the file to the client. Others?? Thoughts? Thanks!!

  Read the article

• Correct XML serialization and deserialization of "mixed" types in .NET

  - by Stefan

  My current task involves writing a class library for processing HL7 CDA files. These HL7 CDA files are XML files with a defined XML schema, so I used xsd.exe to generate .NET classes for XML serialization and deserialization. The XML Schema contains various types which contain the mixed="true" attribute, specifying that an XML node of this type may contain normal text mixed with other XML nodes. The relevant part of the XML schema for one of these types looks like this: <xs:complexType name="StrucDoc.Paragraph" mixed="true"> <xs:sequence> <xs:element name="caption" type="StrucDoc.Caption" minOccurs="0"/> <xs:choice minOccurs="0" maxOccurs="unbounded"> <xs:element name="br" type="StrucDoc.Br"/> <xs:element name="sub" type="StrucDoc.Sub"/> <xs:element name="sup" type="StrucDoc.Sup"/> <!-- ...other possible nodes... --> </xs:choice> </xs:sequence> <xs:attribute name="ID" type="xs:ID"/> <!-- ...other attributes... --> </xs:complexType> The generated code for this type looks like this: /// <remarks/> [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "2.0.50727.3038")] [System.SerializableAttribute()] [System.Diagnostics.DebuggerStepThroughAttribute()] [System.ComponentModel.DesignerCategoryAttribute("code")] [System.Xml.Serialization.XmlTypeAttribute(TypeName="StrucDoc.Paragraph", Namespace="urn:hl7-org:v3")] public partial class StrucDocParagraph { private StrucDocCaption captionField; private object[] itemsField; private string[] textField; private string idField; // ...fields for other attributes... /// <remarks/> public StrucDocCaption caption { get { return this.captionField; } set { this.captionField = value; } } /// <remarks/> [System.Xml.Serialization.XmlElementAttribute("br", typeof(StrucDocBr))] [System.Xml.Serialization.XmlElementAttribute("sub", typeof(StrucDocSub))] [System.Xml.Serialization.XmlElementAttribute("sup", typeof(StrucDocSup))] // ...other possible nodes... public object[] Items { get { return this.itemsField; } set { this.itemsField = value; } } /// <remarks/> [System.Xml.Serialization.XmlTextAttribute()] public string[] Text { get { return this.textField; } set { this.textField = value; } } /// <remarks/> [System.Xml.Serialization.XmlAttributeAttribute(DataType="ID")] public string ID { get { return this.idField; } set { this.idField = value; } } // ...properties for other attributes... } If I deserialize an XML element where the paragraph node looks like this: <paragraph>first line<br /><br />third line</paragraph> The result is that the item and text arrays are read like this: itemsField = new object[] { new StrucDocBr(), new StrucDocBr(), }; textField = new string[] { "first line", "third line", }; From this there is no possible way to determine the exact order of the text and the other nodes. If I serialize this again, the result looks exactly like this: <paragraph> <br /> <br />first linethird line </paragraph> The default serializer just serializes the items first and then the text. I tried implementing IXmlSerializable on the StrucDocParagraph class so that I could control the deserialization and serialization of the content, but it's rather complex since there are so many classes involved and I didn't come to a solution yet because I don't know if the effort pays off. Is there some kind of easy workaround to this problem, or is it even possible by doing custom serialization via IXmlSerializable? Or should I just use XmlDocument or XmlReader/XmlWriter to process these documents?

  Read the article

• Why is Apache seg faulting?

  - by Jamie Howard

  We have a production server that seems to Seg Fault a few times every day. The fault is picked up by Apache and logged in the error log - but there seems to be no traffic around the time. If it's a request generating the fault then it looks like it happens before any other logging is made so I can't see how it's happening so it's very hard to debug. Our setup is Linux 64 bit Centos 5.3 Apache is loaded with the following modules apachectl -t -D DUMP_MODULES | more Loaded Modules: core_module (static) mpm_prefork_module (static) http_module (static) so_module (static) auth_basic_module (shared) auth_digest_module (shared) authn_file_module (shared) authn_alias_module (shared) authn_anon_module (shared) authn_dbm_module (shared) authn_default_module (shared) authz_host_module (shared) authz_user_module (shared) authz_owner_module (shared) authz_groupfile_module (shared) authz_dbm_module (shared) authz_default_module (shared) ldap_module (shared) authnz_ldap_module (shared) include_module (shared) log_config_module (shared) logio_module (shared) env_module (shared) ext_filter_module (shared) mime_magic_module (shared) expires_module (shared) deflate_module (shared) headers_module (shared) usertrack_module (shared) setenvif_module (shared) mime_module (shared) dav_module (shared) status_module (shared) autoindex_module (shared) info_module (shared) dav_fs_module (shared) vhost_alias_module (shared) negotiation_module (shared) dir_module (shared) actions_module (shared) speling_module (shared) userdir_module (shared) alias_module (shared) rewrite_module (shared) proxy_module (shared) proxy_balancer_module (shared) proxy_ftp_module (shared) proxy_http_module (shared) proxy_connect_module (shared) cache_module (shared) suexec_module (shared) disk_cache_module (shared) file_cache_module (shared) mem_cache_module (shared) cgi_module (shared) version_module (shared) security2_module (shared) unique_id_module (shared) fcgid_module (shared) php5_module (shared) proxy_ajp_module (shared) ssl_module (shared) Here's an exert from the Apache error log: [Mon Mar 15 06:39:25 2010] [error] [client 213.246.222.74] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Mon Mar 15 07:41:31 2010] [error] [client 213.246.222.74] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Mon Mar 15 08:24:16 2010] [error] [client 67.19.250.146] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Mon Mar 15 08:43:46 2010] [error] [client 213.246.222.74] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Mon Mar 15 08:54:02 2010] [error] [client 74.208.123.71] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Mon Mar 15 09:09:51 2010] [notice] child pid 2138 exit signal Segmentation fault (11), possible coredump in /tmp [Mon Mar 15 09:45:27 2010] [error] [client 213.246.222.74] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Mon Mar 15 09:49:05 2010] [error] [client 190.12.113.196] File does not exist: /var/www/vhosts/default/htdocs/phpMyAdmin [Mon Mar 15 09:49:06 2010] [error] [client 190.12.113.196] File does not exist: /var/www/vhosts/default/htdocs/PMA And the Access log around the same time (09:09:51): 213.246.222.74 - - [15/Mar/2010:08:43:46 +0000] "GET /" 400 561 "-" "-" 208.80.193.28 - - [15/Mar/2010:08:52:20 +0000] "GET / HTTP/1.0" 301 313 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; SU 2.009)" 74.208.123.71 - - [15/Mar/2010:08:54:02 +0000] "GET /w00tw00t.at.ISC.SANS.DFind:) HTTP/1.1" 400 298 "-" "-" 81.149.146.231 - - [15/Mar/2010:09:15:18 +0000] "GET /zabbix/ HTTP/1.1" 200 3565 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_2; en-us) AppleWebKit/531.21.8 (KHTML, like Gecko) Version/4.0.4 Safari/531.21.10" 81.158.71.196 - - [15/Mar/2010:09:16:06 +0000] "GET / HTTP/1.1" 301 313 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.4; en-US; rv:1.9.0.18) Gecko/2010020219 Firefox/3.0.18" 213.246.222.74 - - [15/Mar/2010:09:45:27 +0000] "GET /" 400 561 "-" "-" 213.246.222.74 - - [15/Mar/2010:09:45:27 +0000] "GET /w00tw00t.at.ISC.SANS.DFind:) HTTP/1.1" 400 298 "-" "-" 190.12.113.196 - - [15/Mar/2010:09:49:05 +0000] "GET /phpMyAdmin/main.php HTTP/1.0" 404 295 "-" "-" So As you can see, there's no access logged around the time of the fault!! How annoying :s I enabled core dumps and here is the backtrace: #0 0x00007f9c8c8a858b in memcpy () from /lib64/libc.so.6 No symbol table info available. #1 0x00007f9c8cfb066d in apr_pstrcat (a=<value optimized out>) at strings/apr_strings.c:165 cp = 0x1fa6b "\205¦H\211¦t`¦\003" argp = 0x7f9c9ad790e8 "Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Referer, Re"... res = 0x0 saved_lengths = {129643, 2, 43, 140310399395576, 0, 140310394592712} nargs = <value optimized out> len = <value optimized out> adummy = {{gp_offset = 16, fp_offset = 32668, overflow_arg_area = 0x7fff968a0ec0, reg_save_area = 0x7fff968a0de0}} #2 0x00007f9c8cfb1bf9 in apr_table_merge (t=0x7f9c8f83b148, key=0x7f9c85a465fe "Vary", val=0x7f9c9ad99070 "Referer, Referer, Referer, Referer, Referer") at tables/apr_tables.c:688 next_elt = (apr_table_entry_t *) 0x7f9c8f83b270 end_elt = (apr_table_entry_t *) 0x7f9c8f83b270 checksum = <value optimized out> hash = 22 #3 0x00007f9c85a42cfa in ?? () from /etc/httpd/modules/mod_rewrite.so No symbol table info available. #4 0x00007f9c85a44022 in ?? () from /etc/httpd/modules/mod_rewrite.so No symbol table info available. #5 0x00007f9c8e87bd1a in ap_run_fixups () from /usr/sbin/httpd No symbol table info available. #6 0x00007f9c8e88e8f8 in ap_process_request () from /usr/sbin/httpd No symbol table info available. #7 0x00007f9c8e88bb40 in ?? () from /usr/sbin/httpd No symbol table info available. #8 0x00007f9c8e887ca2 in ap_run_process_connection () from /usr/sbin/httpd No symbol table info available. #9 0x00007f9c8e892849 in ?? () from /usr/sbin/httpd No symbol table info available. #10 0x00007f9c8e892ada in ?? () from /usr/sbin/httpd No symbol table info available. #11 0x00007f9c8e892b90 in ?? () from /usr/sbin/httpd No symbol table info available. #12 0x00007f9c8e89387b in ap_mpm_run () from /usr/sbin/httpd No symbol table info available. #13 0x00007f9c8e86de48 in main () from /usr/sbin/httpd No symbol table info available. Can anyone shed any light on how to move forward with this? I can confirm that the server is operational and doesn't appear to be misbehaving - the failures are so infrequent that I haven't seen it do one while making a request myself. Really appreciate any help! Cheers!

  Read the article

• Error when pushing to Heroku - StatementInvalid - Ruby on Rails

  - by bgadoci

  I am trying to deploy my first rails app to Heroku and seem to be having a problem. After git push heroku master I get an error saying that relation "tags does not exist. I understand that without knowledge of my application it will be hard to help but I am wondering if someone can point me in the right direction. I have checked the schema.rb file and also been over all my migrations and there doesn't seem to be a problem there. The error message lead me to believe that I left something out of my routes.rb file but can't seem to find anything there either. Perhaps just some help deciphering this message. Processing PostsController#index (for 99.7.50.140 at 2010-04-21 12:28:59) [GET] ActiveRecord::StatementInvalid (PGError: ERROR: relation "tags" does not exist : SELECT a.attname, format_type(a.atttypid, a.atttypmod), d.adsrc, a.attnotnull FROM pg_attribute a LEFT JOIN pg_attrdef d ON a.attrelid = d.adrelid AND a.attnum = d.adnum WHERE a.attrelid = '"tags"'::regclass AND a.attnum > 0 AND NOT a.attisdropped ORDER BY a.attnum ): app/controllers/posts_controller.rb:9:in `index' /home/heroku_rack/lib/static_assets.rb:9:in `call' /home/heroku_rack/lib/last_access.rb:25:in `call' /home/heroku_rack/lib/date_header.rb:14:in `call' thin (1.0.1) lib/thin/connection.rb:80:in `pre_process' thin (1.0.1) lib/thin/connection.rb:78:in `catch' thin (1.0.1) lib/thin/connection.rb:78:in `pre_process' thin (1.0.1) lib/thin/connection.rb:57:in `process' thin (1.0.1) lib/thin/connection.rb:42:in `receive_data' eventmachine (0.12.6) lib/eventmachine.rb:240:in `run_machine' eventmachine (0.12.6) lib/eventmachine.rb:240:in `run' thin (1.0.1) lib/thin/backends/base.rb:57:in `start' thin (1.0.1) lib/thin/server.rb:150:in `start' thin (1.0.1) lib/thin/controllers/controller.rb:80:in `start' thin (1.0.1) lib/thin/runner.rb:173:in `send' thin (1.0.1) lib/thin/runner.rb:173:in `run_command' thin (1.0.1) lib/thin/runner.rb:139:in `run!' thin (1.0.1) bin/thin:6 /usr/local/bin/thin:20:in `load' /usr/local/bin/thin:20 Also, here is my routes.rb file if that helps at all. ActionController::Routing::Routes.draw do |map| map.resources :ugtags map.resources :wysihat_files map.resources :users map.resources :votes map.resources :votes, :belongs_to => :user map.resources :tags, :belongs_to => :user map.resources :ugtags, :belongs_to => :user map.resources :posts, :collection => {:auto_complete_for_tag_tag_name => :get } map.resources :posts, :sessions map.resources :posts, :has_many => :comments map.resources :posts, :has_many => :tags map.resources :posts, :has_many => :ugtags map.resources :posts, :has_many => :votes map.resources :posts, :belongs_to => :user map.resources :tags, :collection => {:auto_complete_for_tag_tag_name => :get } map.resources :ugtags, :collection => {:auto_complete_for_ugtag_ugctag_name => :get } map.login 'login', :controller => 'sessions', :action => 'new' map.logout 'logout', :controller => 'sessions', :action => 'destroy' map.root :controller => "posts" map.connect ':controller/:action/:id' map.connect ':controller/:action/:id.:format' end

  Read the article

< Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >