Search Results

Search found 15231 results on 610 pages for 'presentation model'.

Page 304/610 | < Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >

  • Citrix XenDesktop create an image to work across multiple hardware devices

    - by JohnyV
    I have created an image using this guide http://support.citrix.com/article/CTX119877. However this only works for virtual and the model that I made the image on how can i extend compatibility to another device? I am just using it for a vdisk that I can then also use as a virtual device but I wasnt the vdisk to be available over multiple devices. Using Win 7 on the client. Thanks

    Read the article

  • Best bang for buck, pivotable, non-TN, >= 1920*1200, LCD screen ? [closed]

    - by julien
    I was almost set on getting a Samsung - SyncMaster 2343BW PIVOT, due to the high resolution, pivot and uber-cheapness. But after reading the comment on this SU question, I was bummed to realize it's a TN screen, which apparently would be a pain for my inteded use ; i.e. portrait mode for reading/coding. Do you know of a comparable model that is "IPS or PVA/MVA", but won't break the bank ? cheers

    Read the article

  • No WiFi networks - Fujitsu Lifebook on Windows 7

    - by Sergey Osypchuk
    I lost ability to see WiFi networks on my laptop. I already tryied: reinstall wifi driver reboot disable/enable from windows and from bios check for latest driver both by Windows and Fukitsu driver update When i Use windows Network Diagnostic, I am getting recomendation "Turn on Wireless capability". There is no switch or keyboard combination for this laptop model (or I do not know any one). Any ideas?

    Read the article

  • Modelling interiors with Google Sketchup PhotoMatching

    - by rzlines
    I have come across multiple tutorials explaining how to model structures with Google SketchUp. Are there any tutorial series explaining how to do interiors using Photo Matching and multiple photos. The tutorial should ideally cover the entire process, including the right way to take the photos of the place to modelling the furniture and the walls. Does anyone know of any video series or any literature on the same. Please direct me to the right place

    Read the article

  • How can I make my livebox route to my external IP address for a computer in the DMZ?

    - by Noli
    I have a sagem livebox 2 (Fiber optic model), and have placed my computer in a DMZ. People from outside of my network can access my comp fine via its external dyndns.org address, yet when I try to call the public dyndns.org address from inside my network, I get redirected to the internal admin site on the router. How can I make it so that I can see my comp from the public address like everyone else? What kinds of questions should I be asking or looking into? Thanks

    Read the article

  • iMac memory limit

    - by Mike
    I have an iMac that was from the first generation of aluminum iMacs. The reported model is "iMac 7,1". This iMac's manual says I can put 2 2GB modules, but when this manual was made we don't have modules with more than 2GB and also we had Leopard then, that I suppose can handle less memory than Snow leopard. Today we have 4GB modules, so can I put two 4GB modules and make it 8GB? thanks.

    Read the article

  • Is Tripp Lite a trusted brand for a UPS?

    - by David
    I am looking to buy a rack mounted UPS that can take in 208V power and serve up 120V power. A basic APC unit that can do this is $4k. I have found a Tripp Lite model that will work for $2.5k. Is the extra $1.5k for the APC just for the brand? Or will the Tripp Lite serve me just as well? Thanks!

    Read the article

  • Is there a way to set windows 2008 file and folder sharing permission so you only get prompted for a

    - by Matt
    Is there a way to set windows 2008 file and folder sharing permission so you only get prompted for a password on certain shares? That is, right now, when I got to \theserver\ I get prompted for a password despite having some shared folders that permit anonymous access. Is there a way, asides from setting the policy sharing model to guest rather than Classic to allow a user from a non-domain pc to go to \theserver\ and see the shares and permit him or her to enter a folder with anonymous access without having to enter a username or password?

    Read the article

  • Recommendation for Wiki that supports WYSIWYG?

    - by Kylotan
    Currently we use a MediaWiki installation for writing documentation, but several of us find the markup format horribly arbitrary and awkward, with a mixture of Wiki tags and XML in the text, and the lack of any quick formatting buttons for things like ordered or unordered lists, different heading levels, quick embedding of images, tables, code samples, etc. Sites like LiveJournal provide most or all of this while still generating backwards-compatible markup so it's not like there's a technological impediment here. There are other niceties that we'd like to see, such as being able to pick a category from a list (ala Wordpress) or maybe being able to apply syntax highlighting to code samples, etc. Do Wikis exist that provide a decent range of these features to make life easier on the editor? Something with the features and presentation of WordPress but the page organisation of a Wiki would be perfect. (WikiMatrix returns several candidates, but among them is MediaWiki, which quite clearly is not a WYSIWYG interface except in the most tenuous fashion. I'd rather not dig through each one if it's plain that WikiMatrix is not being entirely stringent about its criteria.)

    Read the article

  • How to work with code examples in Apple's Keynote?

    - by Michael Easter
    I'm creating a presentation in Keynote on the Mac. It is intended for an audience of Java developers, and has some slides that contain blocks of Java code. Even with a monospaced font, I find the TextBox feature to be difficult in terms of formatting. Crazy Bob has an article on how he handled it in 2004 (he creates PDFs from the code samples and then includes those). However, I would like to know if there have been any changes since then. How do you work with code examples (Java, C#, Javascript, whatever) in Keynote?

    Read the article

  • How to dynamically insert text from an external file in a Powerpoint slide?

    - by Xavier Nodet
    My goal is to ensure that the C++ code I insert in my presentation compiles correctly. I therefore thought I'd have each example in a separate file (so that I can compile it), and include the text from those files in the Powerpoint slides... I want this 'inclusion' to be dynamic, so that if I change the code in a file, the slides are automatically updated. Is it possible? Will I have to use LaTeX instead of Powerpoint? Any other suggestion about how to solve this problem? Thanks.

    Read the article

  • I am building a computer, will these components work? [closed]

    - by david
    Case: Coolermaster HAF 912 Graphic card: Sapphire RADEON HD 6850 Optical Drive: SONY SATA DVD-ROM PSU: Corsair CX500 RAM: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBXL Motherboard: MSI Z77A-G43 Processor: Intel core i3 2120 Still don't know which harddrive to use, neither if i should buy a cpu cooler fan... so if you can help me, please

    Read the article

  • Some Memory Slots Not Working on MSI FM2-A85XA-G65 Motherboard

    - by Mike Ciaraldi
    Short version of question: Does anyone have an MSI FM2-A85XA-G65 motherboard, who can confirm that all four memory slots work? Long version: Several months ago I bought an MSI FM2-A85XA-G65 motherboard at Newegg. At that point I installed an AMD A8-5500 processor and two sticks of Corsair Vengeance 8 GB DDR3-1866 memory, and put it into my file server. I installed the RAM in slots 1 and 3, as directed in the manual, to enable dual-channel memory access. It seemed to work fine, so I bought a second identical mobo (which arrived dead, but was quickly replaced by Newegg) and set of RAM, installed an A10-5800K, and put that into my production Linux machine. Again, it seemed to work well. Eventually I happened to notice that on the server only 8 GB of RAM appeared in the BIOS. I tried each of the slots and memory modules individually and in various combinations. I even swapped processors with the production machine. The result was that putting memory in slots 1 and 2 worked (showing a total of 16 GB), but any memory in slots 3 or 4 was not recognized. However, all four memory slots in the production machine worked, and I confirmed this with both processors. I contacted MSI and arranged to ship the defective mobo back to them for replacement under warranty. I did not want my file server to be down in the interim, and I had another machine I wanted to upgrade, so I bought a third identical mobo to use. That one had the same problem -- only memory slots 1 and 2 worked. I tested it thoroughly with multiple processors and memory sticks. I sent the defective mobo back to MSI and they sent me a new one. This has the same memory slot problem. So I sent it back. The replacement arrived the other day and shows the same problem. I contacted MSI yet again and they said that nobody else has reported memory slot problems on this board and it must be my processor. So my score so far is, out of six boards of this model, I have: One where all four slots work. One which was dead on arrival. Four where only memory slots 1 and 2 work. Before I tear my other machines apart and start swapping processors again I thought I would ask if anyone else has this exact model motherboard and could confirm that all four memory slots either do or do not work. According to MSI you should be able to just plug a single memory module into any of the slots and it will work (and it does on the one mobo I have which works correctly). If you have not yet used all four slots, this is a good time to test them so you know if you can expand your memory in the future. Thanks in advance to anyone who can help.

    Read the article

  • WindowsXP with no drivers

    - by user38008
    So I formatted my windows XP and reinstalled it. But forsome reason my drivers disk is for the wrong Dell Model..... So I can't connect to the internet because I think I'm missing the ethernet driver. Am i screwed or can I obtain theses drivers elsewhere....

    Read the article

  • update nokia app installed via ovi

    - by Ryan Fernandes
    I've installed a version of a very handy application (Nokia Battery Monitor 1.1) and was quite pleased to see a v1.2 out recently. The problem is that I cant seem to update this app on my phone via the ovi app; the 'download' link is disabled. Also tried the 'sw update' app, but it reports that all applications are up-to-date. Any idea how do this without installing/reinstalling the app? The phone model is Nokia 5800

    Read the article

  • Can I back-up to partition to restore my computer to factory settings?

    - by leaf68
    I have a VAIO model VPC-F11JFX/B. I want to restore it to factory settings (instead of formatting it so I can keep the programs it comes with like VAIO Care). I have like 20 GB of data so I can't copy it into my flash drive and it would take up like 7 of my CD's so I can't do that either. So can I make a new partition (called D) and move the files to D from C. Because I don't know if restoring to factory settings is going to wipe the entire drive or just the partition.

    Read the article

  • HP Proliant G7 hardware RAID configuration automation with ribcl

    - by karthik
    I have been trying to automate hardware RAID configuration of HP proliant machines before OS installation (So I can not use hpacucli) ssh into iLO3 doesn't have option for RAID configuration I use ribcl but there is no command for RAID config, however I see this under the command GET_EMBEDDED_HEALTH. <STORAGE> <CONTROLLER> <LABEL VALUE="Controller on System Board"/> <STATUS VALUE="OK"/> <CONTROLLER_STATUS VALUE="OK"/> <SERIAL_NUMBER VALUE="50014380215F0070"/> <MODEL VALUE="HP Smart Array P420i Controller"/> <FW_VERSION VALUE="3.41"/> <DRIVE_ENCLOSURE> <LABEL VALUE="Port 1I Box 1"/> <STATUS VALUE="OK"/> <DRIVE_BAY VALUE="04"/> </DRIVE_ENCLOSURE> <DRIVE_ENCLOSURE> <LABEL VALUE="Port 2I Box 0"/> <STATUS VALUE="OK"/> <DRIVE_BAY VALUE="01"/> </DRIVE_ENCLOSURE> <LOGICAL_DRIVE> <LABEL VALUE="01"/> <STATUS VALUE="OK"/> <CAPACITY VALUE="68 GB"/> <FAULT_TOLERANCE VALUE="RAID 0"/> <PHYSICAL_DRIVE> <LABEL VALUE="Port 1I Box 1 Bay 3"/> <STATUS VALUE="OK"/> <SERIAL_NUMBER VALUE="6TA0N3SZ0000B231CYDT"/> <MODEL VALUE="EH0072FAWJA"/> <CAPACITY VALUE="68 GB"/> <LOCATION VALUE="Port 1I Box 1 Bay 3"/> <FW_VERSION VALUE="HPDH"/> <DRIVE_CONFIGURATION VALUE="Configured"/> </PHYSICAL_DRIVE> </LOGICAL_DRIVE> </CONTROLLER> </STORAGE> My question is, is there a way I modify/create this xml piece (say I have 2 Logical drive with one spare) and reboot the server it takes effect ? If this approach is not correct are there any other ways to automate hardware raid config ?

    Read the article

  • I have 2 identical windows 2008 r2 servers with 32G RAM, one shows "Installed Memory(Ram): 32.0GB" a

    - by c0m4
    the server model: HP Poliant DL160 G5, both servers have identical product ID. for some reason one of the servers have 4GB ram reserved. it shows in the memory tab on the Resource monitor as "Hardware Reserved". I've googled it a bit and found some post related to msconfig boot parameters (but mine are properly set) and some post related to memory remap option in the bios but it is not available in my servers bios so in a bit lost... help?

    Read the article

  • How to make local apache server public/visible ?

    - by George
    Hello. I am running an Apache2 server on a Fedora 13. I'd like to make it publicly accessible(visible).For example I'd like when somebody types http://my.ip.numbes/ that they would see what I have in my document root folder. Just for a presentation of a course work at university. Permissions are set to 755. User owning the document root is apache. SELinux is temporarily disabled. But port 80 is closed. I tried to open it by adding an entry to iptables and restarting them, no change. I guess I am missing something big here. Help would be greatly appreciated. Note: I have a static (public, real) IP address.

    Read the article

  • Refurbished vs. Used monitors

    - by Timur Sadykov
    I am looking for additional monitor, I'm trying to save some money by looking on used and refurbished ones. Used monitors are usually noticeably cheaper, but it is quite difficult to find something close to the desired model. Their condition also vary significantly. Refurbished ones eliminate these problems for some additional money. Is there anything to look out for with refurbished monitors? Do many of the have lots of broken pixels etc?

    Read the article

  • PowerPoint 2007 animated slides are only partially converted to PDF

    - by Tim
    I have recently encountered a problem with PowerPoint 2007. When I use "Save as PDF/XPS" to create a PDF version of my presentation, some slides are only partially included in the resulting PDF file. For example, this: is reduced to this: So far, I have only encountered this with slides that contain animation elements, but which part of the elements remain in the PDF version appears not to have anything to do with the order in which the animated elements appear, so that might just be a coincidence. When viewing the affected slides in Acrobat Reader, it complains about this file containing invalid elements, and that I should complain to whoever generated the PDF file... Perhaps it has something to do with the Office 2007 Service Pack 3, because these problems started only after it had been installed. Has anyone noticed something similar? Is there a workaround?

    Read the article

  • What desktop boards support VT-D or IOMMU?

    - by Jeff Shattock
    I'm looking for a desktop board that supports either VT-D (Intel) or IOMMU (AMD) technology. This is the IO virtualization technology, not VT-x for CPU virtualization. I've found a list of chipsets that are purported to have this, but every board I look at, the vendor has decided to not support that feature. I would really prefer a desktop board over a server board for this. Does anyone have a specific model that is known to support this technology?

    Read the article

  • centos freezes with this error kernel: ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x0

    - by lakshman
    0 down vote favorite share [fb] share [tw] I am using centOs 5.5 version with raid 1 configuration the server freezes and goes to non response . the only thing i found on messages file is kernel: ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x0 The server is built recently Please let us know what is the problem the hard disk details are Model Number: ST500NM0011 Serial Number: Z1M02LT7 Firmware Revision: SN02

    Read the article

< Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >