Search Results

Search found 10878 results on 436 pages for 'changed'.

Page 305/436 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

• Multiple copies off the same printer on Windows 7 from PrintUIEntry

  - by Kev

  I currently have a number of bat files which work perfectly fine on Windows XP which install the same printer multiple times with a number of finisher options set - e.g. after running the bat file below I would end up with four printers in the printer drop down called Sharp Kits Printer - A4 Single Sided Sharp Kits Printer - A4 Single Sided Stapled Sharp Kits Printer - A4 Duplex Stapled Sharp Kits Printer - A4 Duplex which all have there options configured in the relevant way. I have amended on Windows 7 to point to correct INF file and printer name in the INF files - a single printer installs fine. However when I run the complete batch file only the first printer in it is installed - occassionally the later ones flash up in the GUI but then vanish when you press F5 and are still missing after a reboot. SET QUEUENAME=http://192.168.7.123:631/printers/Sharp700 SET PPD=J:\DRIVERS\Printers\MX700-Win7-64\SJ1JWENG.INF SET PPDENTRYNAME=SHARP MX-M700U PPD J: cd "\DRIVERS\Printers\MX700-Win7-64" SET NICENAME="Sharp Kits Printer - A4 Single Sided" SET PREFS="J:\SCRIPTS\Printers-Win7-64bit\Sharp_SINGLE_SETTINGS.dat" %SYSTEMDRIVE%\WINDOWS\system32\rundll32.exe %SYSTEMDRIVE%\WINDOWS\system32\printui.dll,PrintUIEntry /w /b %NICENAME% /x /n "part of the n switch" /f "%PPD%" /if /r "%QUEUENAME%" /m "%PPDENTRYNAME%" rem restore settings go here... SET NICENAME="Sharp Kits Printer - A4 Duplex" SET PREFS="J:\SCRIPTS\Printers\Sharp_DUPLEX_SETTINGS.dat" %SYSTEMDRIVE%\WINDOWS\system32\rundll32.exe %SYSTEMDRIVE%\WINDOWS\system32\printui.dll,PrintUIEntry /w /b %NICENAME% /x /n "part of the n switch" /f "%PPD%" /if /r "%QUEUENAME%" /m "%PPDENTRYNAME%" rem restore settings go here... I have tried adding the "/u" paramater to the end, I have changed the "/n" paramater to be different (e.g. n1, n2,n3 etc) - both of these result in the same. I have also tried to change the port (/r) to have "_1" (etc) on the end like the GUI would but this errors as the port doesn't exist. Is it possible to do this on Windows 7, and if so how?

  Read the article

• Running WAMP (XAMPP) and LAMP from One SSD, On 64-bit Windows and Linux Machines

  - by nicorellius

  I have an solid state drive that I develop websites on. The reason I do this is because I work on a few different computers. Historically, I created separate developing environments to use for each machine. This was OK, but if the system changed for some reason, eg, new OS install, it was a pain. So I bought a USB 3.0 enclosure and put a solid state drive in there and it's pretty darn fast, which is good. I was working with three Windows machines and I could simply hook up the drive, launch my XAMPP server and away I went, developing websites: using Dreamweaver, Komodo, Notepad++, Eclipse, etc. Recently, however, one of my Windows machines' hard drive went down and instead of going back to Windows in this case, I went with Ububntu 12.04. I have several Ubuntu workstations and servers and I like Linux, so I thought his was a great opportunity to transition. I went to work installing and trying to set up a LAMP server and, besides from XAMPP 64-bit compatibility out of the box, I'm seeing other issues with getting this Linux server running. I will keep trying to resolve this, but in the meantime... my question is, has anyone ever successfully run both WAMP and LAMP from the same SSD (formatted to NTFS)? I'm sure there are lots of barriers to this happening, like local file system, OS libraries, dependencies, etc. But I was thinking it would be cool if it could be done. I'm no expert, so if this is just plain old stupid, please don't hesitate to let me know.

  Read the article

• IP Masquerade and forwarding

  - by poelinca

  Hi all , i got a dedicated server running ubuntu server 10.10 with 3 ip adresses on the same eth card ( example: eth0 192.168.0.1 , eth0:0 188.78.45.0 , eth0:1 ... ) with a 3 virtual machines running ( virtualization technologi used is lxc but i don't think this matters too much ) . Now i need to redirect all ports opened ( using ufw to close/open ports ) from the ip 188.78.54.0 ( eth0:0 ) to a virtual machine ip ( let's say for example 192.168.2.3 ) , all requests made by a virtual machine should be redirected back to the virtual machine that made the request ( in this example 192.168.2.3 ) . Lets say the second vm has the ip 192.168.2.4 now i need to redirect all opened ports to from eth0:1 to this ip and viceversa . And so on and so on , what are the iptables/ufw rules to get this done ? and where to save them ( witch config file ) so they stay the same after reboot . In a few words redirect all requests comming from/to eth0:0 to a certan ip , all requests comming from/to eth0:1 to another ip ... Remember i'm saying all ports opened becouse they might be dynamicly changed . p.s. please excuse my bad english

  Read the article

• can't register a soft phone to asterisk11

  - by Tom

  I have a VM (on oracle vbox) running Fedora17. I've installed asterisk 11 on it from sources. I've followed the wiki for installation (https://wiki.asterisk.org/wiki/display/AST/Creating+SIP+Accounts) to the letter. The ip on the VM machine running fedora is 192.168.1.7 and I can ping it from the host machine (Ubuntu 12.04), which is at 192.168.1.2 I've tried registering with ekiga with the following settings: user: [email protected]. Password: verysecretpassword registar: 192.168.1.7 but I'm getting an error "transport fail". Also, while trying to register I'm logged in to the asterisk CLI with verbose level 3 and debug level 4 and nothing appears. some more relevant data: I've added the following code to the end of my sip.conf.sample file: [demo-alice] type=friend host=dynamic secret=verysecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 [demo-bob] type=friend host=dynamic secret=othersecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 After I changed the sip.conf.sample file, I've created a copy of it and named it sip.conf. then I logged in to the asterisk CLI and typed sip reload. Then I'm trying to register and ekiga client from my host machine at 192.168.1.2 but it doesn't work and nothing appears on the asterisk CLI while in verbose mode level 3. BTW, If there is missing information about my question, please don't close it. comment about what you need to know and I'll edit it in to the question. tnx.

  Read the article

• WIN7 constant BSOD 0x7B on boot, not producing any dump files where to go from here?

  - by prayingpantis

  So my one win 7 pc has been getting a BSOD on boot (roughly a sec after load screen starts) after a power failure. The complete stop code is 0x0000007B (0x80786B58, 0xC0000034,0x00000000,0x00000000) I've searched for quite a while now on the net and it seems like most people gave up after gettting 0x7B and no dump files. What I've tried so far: startup repair - reports it cannot repair computer automatically. BadPatch is reported somewhere in a problem signature contained in the problem details. startup repair with a WIN 7 CD - also fails, I can't recall what the error was, but it was not the same as the error produced with the start up tool shipped with the version of WIN 7 installed on my machine (I think the text had something ACL-ish contained in it) used a boot disk (Hiren's boot iso) - I used it to enable the CrashDump registry key and then after BSOD, read the HDD's dump locations but it was empty. Note, I'm quite sure the registry keys I edited are the correct ones, since the reboot on BSOD option was enabled by default and after I changed the regkey controlling this functionalitty to 0 the BSOD stayed after I booted again. check disk - works and returns no problems, also it seems I'm able to access all my files on the HDD. mem test - works and returns no errors So I'm not sure what else I can do to figure out what is the problem here. I read somewhere that you can use WINDBG to remote debug another PC, but I'm not sure if this is possible since the OS isn't even loaded yet? Also the last driver change I made on the system was installing a video driver, but I had no problems with it and were able to reboot several times until the power outage happened and the BSOD appeared. Any help or guidance for a way to DEBUG this problem would really be appreciated (I'm not really that keen to try a whole bunch of random fixes, I'd rather try and narrow down the problem first).

  Read the article

• How to change password on RAR archive w/o modifying arch. files attributes (modified/created)?

  - by Larry78

  How do I change the password of an .RAR archive, without changing the date/time attributes of the files in the archive? Unfortunately you can't directly change the password of the archive with WinRAR, you have to extract the files, and then make a new archive with the new password. So the created/modified attributes of the files in the archive get changed. I know you can manually change the attributes of a file with available utilities - but there are hundreds of files in the archive, each with unique attributes, so it would take a very long time to "fix" each file before re-archiving it. I'm using WinRAR 3.51, the last free version. Windows XP Pro SP3. Update: I don't care if the output is a .RAR file or a ZIP file IZArc4.1 will convert the RAR to a ZIP, and it keeps the dates. The problem is it compresses the file - there isn't a "store" option, and setting the default to store in the main configuration doesn't effect conversions. The RAR contains uncompressed files. None of these other archiving programs will even do a conversion. A couple claim to, or try to, but the errors returned indicate a very lousy application. So far I've tried PeaZip, 7-Zip, FilZip, TugZip, SimplyZipSE, QuickZip, and WinShrink (from downloads.cnet.com). WinRAR gives the error "skipping encryped archive" when I try the conversion. It asks for the password first, and I know it's right, as I opened the archive, and I can read/view all the files in it. It works on non-encrypted files.

  Read the article

• "Error 5: Access denied" when installing programs with UAC turned off

  - by Aero

  I'm having some trouble installing msysgit 1.7.3.1preview on Windows 7 Home Premium. I downloaded the setup file from the Google Code and then ran it. Upon running, I got the following error: I have tried downloading and running different older versions of msysgit with no luck. For the record, I have administrative privileges and there are no other user accounts on this Windows machine. Any help would be greatly appreciated. Thanks. UPDATE: I have managed to semi-fix this problem. I turned on User Account Control back to the default setting and and then ran the setup file as an administrator. I successfully managed to install Git. However, this means I have to keep UAC turned on whenever I want to install a new program (I realised that it persists over all programs; not just Git). So it's quite a nuisance. If anybody knows how I could keep UAC disabled whilst still being able to install programs without running their setup files as an administrator, I would be eternally grateful. UPDATE: I have changed the question title to better suit the new situation.

  Read the article

• Save and restore multiple layers within a Photoshop action that flattens

  - by SuitCase

  I'm editing comic pages with layers - "background", "foreground", "lineart" and "over lineart". I have a Photoshop action that includes a Mode-Bitmap command, which requires the image to be flattened. I need this part of the action because I use the Halftone Screen method of reducing the greyscale image to bitmap on the "background" layer, creating a certain effect. I am pretty sure there is no filter or anything else that gives the same effect. After the mode is changed to bitmap, my action changes things back to greyscale for further changes. This poses a problem. I only want to do the bitmap mode change on the background layer, and after I do the change I want to restore the layer structure as it was - with the foreground, lineart and over lineart layers back above the now-halftoned background. My current method of saving these layers and restoring them is clumsy. My action is able to automatically save the "foreground" layer by selecting it, cutting it, then pasting it back in after the mode changing is over. But, for the "ink" and "over ink" layers, I have to manually cut these layers, paste them into a new document, and later re-cut and re-paste after running my action. This is so clunky! What I would like to know is if it's possible to set aside my layers in an automated way, and then bring them back in, also in an automated way. An ugly (but functional) solution would be to replicate my actions of creating new documents and pasting them temporarily there, but I don't think Photoshop allows you to do things outside of your current document with an action. It seems to me that the only way to do what I want is to use the "hack" of incorporating the clipboard into the action as a clever hack, but that leaves me stuck as I have two more layers that can't fit onto that same clipboard. Help or suggestions would be appreciated. I can keep on doing it manually, but to have a comprehensive action would save me a ton of time.

  Read the article

• Have to run auto-negotiate between clients and switch - "old" switch works fine - "new" switch results in "port flapping"?

  - by ConfusedAboutSwitching

  I need some help understanding a problem we're having at work: We run Altiris/Deployment Solution and have to use auto-negotiate between client systems and our switches (Altiris apparently requires this for imaging, PXE boot and other functions). We have several areas with old wiring (Cat 3 & Cat 5) that have old 10/100 Cisco switches in them - and we can set these systems up to "auto/auto" (auto-negotiate on both the NIC and the switch port), and everything has been working fine. But - our networking crew changed out a couple of old switches for 10/100/1000 Cisco switches, and now - they are claiming that "auto/auto" won't work because the switches can't auto-negotiate the way the old 10/100 switches did - and that if we try to set the new gig switches to auto-negotiate, the switch port starts "port flapping", and shuts the port down. But - if we put the old switch back in - they work using "auto/auto" just fine - no port flapping. The networking crew is telling me that the problem is that we're putting "new switches" on "old wire", and that the old cabling can't/won't support the auto-negotiation with these new switches....??? There's something about this that doesn't make sense to me - can someone explain this to me? Or is our networking crew just doing something wrong in the configuration of these new switches? While will the old switches work "auto/auto", but the new switches won't?? HELP!!....and Thanks!! M

  Read the article

• glassfish timeout

  - by Stefano

  Environment: Windows 2008 Server Edition Netbeans 6.7.1 Glassfish 2.1 Apache 2.2.15 for win32 Original problem (almost fixed): The HTTP/1.1 GET method to send data fails if I wait for more than 30 seconds. What I did: I added to the http.conf file of Apache these lines: # # Timeout: The number of seconds before receives and sends time out. # Timeout 9000 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On I went to the Glassfish panel (localhost:4848) and in Configuration HTTP services and I put: Timeout request: 9000 seconds (it was 30) Standby time: -1 (it was 30 seconds) Problem: I am not able to put for glassfish a timeout bigger than 2 minutes to send a GET method. I found this article about glassfish settings, but i'm not able to find WHERE I should put those parameters, and if they could work. Can anybody help try to set this timeout to a higher limit? Maybe it's even a different setting? New tried solution: I went to the glassfish panel control, and to Configuration Subprocesses "Thread-pool-name" and changed the idle timeout from 120 seconds to 1200 seconds. Then I restarted the glassfish service (both from the administrative tools and from asadmin), but still it waits 120 seconds to go idle. I even tried restarting the whole server, still no results. Maybe some setting in postgres? Or the connection of netbeans to postgres through glassfish?

  Read the article

• Cron job checking for changes in Git repository

  - by HNygard

  We have just moved our server configs to a Git repository. Therefore there should not be any changes in any of the repository folders. I was thinking about how I could set up a cron job to check for any uncommited changes. How could a cron job be set up to check for changes in a Git repository? Greping the output of the git status command might just do it. Grep and cron jobs are not my strong side. Here are some sample outputs from git status: Standing the folder containing the git repository (e.g. /path/gitrepo/) with changed files: $ git status # On branch master # Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # # modified: apache2/sites-enabled/000-default # # Untracked files: # (use "git add <file>..." to include in what will be committed) # # apache2/conf.d/test no changes added to commit (use "git add" and/or "git commit -a") Standing in the folder when there is no changes: $ git status # On branch master nothing to commit (working directory clean) Update: Synced up with origin is not important. There should be no local changes. Local files that must be in place go into the .gitignore file. In addition to the server configs there are also git repos for content (static web sites, web apps, wordpress, etc). None of the repositories should have local changes. We might use Puppet in the long run since its being used for development of one of the web apps.

  Read the article

• linux automatic change permissions in resolv.file

  - by rikr

  In various linux servers I see how the permissions of the /etc/resolv.conf file change automatically. In state normal: -r--r--r-- 1 root root 103 Jul 4 11:50 resolv.conf In changed state: -r--r----- 1 root root 103 Jul 4 11:50 resolv.conf I installed auditd for monitoring it, and these are the two entries between the change: type=PATH msg=audit(07/04/2012 12:20:02.719:303) : item=0 name=/etc/resolv.conf inode=137102 dev=fe:00 mode=file,644 ouid=root ogid=root rdev=00:00 type=CWD msg=audit(07/04/2012 12:20:02.719:303) : cwd=/ type=SYSCALL msg=audit(07/04/2012 12:20:02.719:303) : arch=x86_64 syscall=open success=yes exit=3 a0=7feeb1405dec a1=0 a2=1b6 a3=0 items=1 ppid=1585 pid=3445 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=4294967295 comm=hostid exe=/usr/bin/hostid key=(null) type=PATH msg=audit(07/04/2012 12:50:03.727:304) : item=0 name=/etc/resolv.conf inode=137102 dev=fe:00 mode=file,440 ouid=root ogid=root rdev=00:00 type=CWD msg=audit(07/04/2012 12:50:03.727:304) : cwd=/ type=SYSCALL msg=audit(07/04/2012 12:50:03.727:304) : arch=x86_64 syscall=open success=yes exit=3 a0=7f2bcf7abdec a1=0 a2=1b6 a3=0 items=1 ppid=1585 pid=3610 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=4294967295 comm=hostid exe=/usr/bin/hostid key=(null) any ideas?

  Read the article

• Is domain-transfer inherently safe for downtime when the name servers remain the same?

  - by jlmt

  I've been reading around this topic towards understanding whether there's some or no chance of downtime during an upcoming domain transfer for 15 live and very critical domains. In our case there are three companies involved: CompanyA is the original registrar and DNS host, CompanyB is the new DNS host, and CompanyC is the new registrar. I've already changed the nameservers for all domains to those of CompanyB. We suffered some downtime because CompanyA deleted their hosted DNS for our domains directly after the change, but the changes propagated and we're now able to configure our DNS with CompanyB. From what I understand (please correct where wrong!): There exists an SOA record that points oneofourdomains.com to ns.companyb.com. That record is maintained and authoritatively hosted by the ccTLD registry for the domain (eg. Verisign for .com). CompanyA currently has the ability to change the SOA record because they're the registrar. There exist NS records for oneofourdomains.com, which are also related to the link from domain name to nameserver, are similarly hosted by the ccTLD, and which CompanyA are also able to change while acting as registrar. Neither CompanyB nor CompanyC currently have any control over the SOA or NS records. CompanyA are unable to cause us (DNS) problems during the transfer by dropping service early, because they are not the authoritative source for the SOA and NS records. When we transfer the domains, it's administrative control of the SOA and NS records that will be transferred to CompanyC. As long as we advise CompanyC that the SOA and NS records must not change (as regards pointing to CompanyB's nameservers), there's no need for any kind of DNS change, and therefore no possibility of downtime. Is my understanding of this correct? My fear is that CompanyA will somehow cut us off again, and their support dept hasn't given me much confidence in their understanding of the topic.

  Read the article

• ubuntu suspend works, but then immediately starts

  - by Yoav Aner

  Having a strange problem after upgrading from Ubuntu 11.04 to 12.04. Previously I could suspend just fine, the computer will switch itself off. Pressing the ON button will switch it on and it will resume. After upgrading to 12.04 however, when I suspend it does (almost) the same, turns itself off, but about 2 seconds later, the computer turns itself on again, and it goes back to life from suspend. I haven't changed any of the hardware or BIOS and it was working before just fine. Also tried every possible switch of pm-suspend ; setting acpi_sleep=nonvs in /etc/default/grub and also this suggestion but nothing seems to make a difference... UPDATE: just tested suspend using the 12.04 liveCD and it was working perfectly fine... but when I boot normally it doesn't. ANOTHER UPDATE: After re-installing I noticed that I can suspend. However, after restoring my home folder - the strange suspend problem happens again. I then created a new user account. When I login to the other account I can suspend without a problem... So This seems specific to my account only. How/What can cause this in my own user settings?

  Read the article

• SSH attcack CentOS Amazon EC2

  - by user37143

  Hi, I run a few Rightscale CentOS AMI based instances on Amazon EC2. Two months back I found that our SSHD security is compromised( I had added host.allow and host.deny for ssh). So I created new instances and done an IP based ssh that allows only our IPs through AWS Firewall(ec2-authorize) and chnaged the ssh 22 default port to some other port but two days back I found I was not able to login to the server and when I tried on 22 port the ssh got connected and I found that sshd_conf was changed and when I tried to edit sshd_config I found root had no write permission on the file. So I tried a chmod and it said access denied for 'root' user. This is very strange. I checked secure log and history and found nothing informative. I have PHP, Ruby On Rails, Java, Wordpress apps running on these server. This time I did a chkrootkit scan and found nothing. I renamed the /etc/ssh folder and reinstalled openssh through yum. I had faced this on 3 instances on CentOS(5.2, 5.4) I have instances on Debian as well those working fine. Is this a CentOS/Rightscale issue. Guys, what security measures I should take to prevent this. Please support me this is very critical. Thanks

  Read the article

• S3sync not working

  - by user57833

  Hello, I managed to get s3sync to upload my test folder to Amazon S3 and can see it in the MWS Managment Console. Downloading the data back to a test folder results in the following error message: root@mybucketname:/var/s3sync# ./week_download.sh s3Prefix backups/weekly localPrefix /var/s3sync/testdown/weekly s3TreeRecurse mybucketname backups/weekly Creating new connection Trying command list_bucket mybucketname prefix backups/weekly max-keys 200 delimiter / with 100 retries le ft Response code: 200 prefix found: / s3TreeRecurse mybucketname backups/weekly / Trying command list_bucket mybucketname prefix backups/weekly/ max-keys 200 delimiter / with 100 retries l eft Response code: 200 S3 item backups/weekly/ s3 node object init. Name: Path:backups/weekly Size:0 Tag:d41d8cd98f00b204e9800998ecf8427e Date:Fri O ct 29 14:21:53 UTC 2010 local node object init. Name: Path:/var/s3sync/testdown/weekly/ Size: Tag: Date: source: dest: Update node s3sync.rb:638:in initialize': No such file or directory - /var/s3sync/testdown/weekly/.s3syncTemp (E rrno::ENOENT) from s3sync.rb:638:inopen' from s3sync.rb:638:in updateFrom' from s3sync.rb:393:inmain' from s3sync.rb:735 I am using the following download script: !/bin/bash script to download local directory upto s3 cd /var/s3sync/ export AWS_ACCESS_KEY_ID=nothing to see here export AWS_SECRET_ACCESS_KEY=nothing to see here export SSL_CERT_DIR=/var/s3sync/certs ruby s3sync.rb -r -v -d --progress --make-dirs mybucket:backups/weekly /var/s3sync/testdown copy and modify line above for each additional folder to be synced Any idea's? Does the download script need to download to the source of Amazon S3 i.e testup folder? Was hoping on the instance of a complete failure and the original folders won't exist that it would just download everything from me. Note: changed my bucket names to "mybucketname" so that it is not public!

  Read the article

• 2 Computers, same network, different outgoing speeds when uploading to internet?

  - by user117339

  I have 2 work machines in my office, a PowerMac G5 and a MacBook Air. Both behind an IPCop firewall. The PowerMac is connected through a gigabit switch, the MacBook Air is connected through a Netgear 802.11g access point that is then plugged into the gigabit switch. There is also a FreeNAS box, both machines are able to read and write files to it at close to their pipe speeds. The main problem is when I am trying to upload files to the internet at large. The G5 is only hitting 0.1 - 0.25 Mbps. The Macbook is able to hit 2-3 Mbps. The setup (G5 / IPCop / Network) has been the same for 5 years. The issues with the internet speed started about 3 months ago. I hadn't tested on the Macbook at this point. I had complained to the ISP, they said their modem needed a firmware update, did that nothing changed. Reset IPCop, turned off squid, etc. No changes. The ISP switched the office over to a better plan with a theoretical 6 Mbps up, still no change. At this point I tried testing the Macbook, and lo and behold there's the speed. But why? I have tried changing out everything, cables, switches, using another ethernet port on the G5, wiping the system, using DHCP, using manual IPs, changing DNS servers, etc. Nothing works. I figured that if there was something horribly wrong with the network, then internally I would find a similar issue, but that is perfect. iperf, ping, etc show no dropped packets and near saturation of the internal network. I'm at a loss as to what the heck is going on. Any ideas would be appreciated! Below are some screenshots of speedtest.net: G5: Macbook Air:

  Read the article

• Windows 7 'Unidentified Network'

  - by Throdne

  So my internet was working last night before I went to bed and woke up to a computer that is showing unidentified network. I have tried multiple ways of fixing it. > route delete 0.0.0.0 > uninstalling drivers - restart - reinstall from downloaded drivers > ipconfig /release - /renew > static IP > speed & duplex from auto negotiation to 1.0gbps full duplex > and also changed my network address to no value to 1234567890ab (not in that order) nothing seems to work. I have Comcast internet and when I connect the computer to the modem it works perfectly. but when I connect it to my router again, Unidentified network. I know my router isn't faulty, because my macbook pro, server, NAS, iPhones, and iPads are still working. I have also tried moving the port on the router, still same problem. my router is a: Cisco Small Business RVS4000 motherboard: GIGABYTE GA-990FXA-UD3

  Read the article

• Netbook thinks it is a desktop

  - by Narcolapser

  Question: Are, and if so what, there packages for download that I can get netbook to understand it is not a desktop and that it is a netbook. Info: I'm running an Acer Aspire One with ubuntu desktop 9.10. I tried Ubuntu Netbook Remix first but it has graphics issues with the aspire one. So I changed to Ubuntu Desktop. It was the only distro (after debian, centOS, Fedora, and Knoppix all failed me) that I managed to get working. The only thing is that it is having issues doing things that a netbook/laptop should be doing. most notably is that it will run it's battery dead if I close the screen and throw it into my back pack. It seems to just stay fully on and runs it's self to death. also it will lock up some times if I close the screen and come back to it 10 or 20 minutes later. It also won't retain volume settings when I reboot, as well as screen brightness. and just a couple of other things that I can't quite put my finger on, but just seem amiss. like I said, Essentially my netbook thinks it is a desktop, how can I fix this? ~N

  Read the article

• VMWare Server modifying files related to paused VMs, is this expected?

  - by David Spillett

  While refreshing the backup of a VM used for testing, I experienced the following warning from tar: tar: /VMsR0/cli_noddyco_test/VM2K8_32_web.vmem: file changed as we read it The VMs in question were paused at the time. My first though was that I'd mixed up the machines and was trying to backup something that was still actively running. To be sure I unpaused and properly shut down the VM, and the vmem files that tar reported changing vanished as I would expect. Is it normal for VMWare Server to touch or alter files for paused VMs like this, or is there likely something amiss with our setup? If this is expected behaviour, is just touching the vmem file (and so altering the last modification date without actually changing content)? If it is normal for files relating to paused VMs to be updated I shall have to revise our backup procedures to make sure the VMs are fully shut down fully rather than just pausing them (this isn't a problem, but it seems strange and I'd prefer to understand what VMWare is doing and why instead of just dismissing it as "one of those things" and working around it). For further detail: the host in question is VMWare Server version 2.0.2 running on 64-bit Debian/Lenny, and that VM did not have a snapshots at the time. We have backed up paused VMs this way in the past with no such warnings from tar.

  Read the article

• linux networking: how to redirect incoming connections from old server to new server?

  - by aliz

  hi I'm in the process of moving my old server to a new server, but i will keep the old server running for database replication and load balancing, etc. each server has a separate internet connection with a static ip, and they are connected through a local Ethernet connection. I've got Ubuntu 8.04 32-bit running on old server and Debian 6.0 64-bit on new one. shorewall firewall is installed on both servers. there are some outdoor devices which are periodically sending data to port 43597 for old server IP address. I can run multiple instances of the network service which is responsible for receiving data from devices on a server but on different ports. here's the question: how can I run the service on new server and have connections coming to old server redirected to it, and new devices can still connect to new server's IP address preferably on the same port and same service? until all devices get updated to send to new server. I've tried a shorewall DNAT rule, but seems like new server's default route should be changed to ethernet connection, which breaks other things. I also found about redir utility, but still haven't tried it. is there any best practice or simple solution for such a scenario, i'm not aware of? thanks in advance.

  Read the article

• Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks.

  - by A302

  Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

  Read the article

• Repairing Windows 7 boot after Ubuntu 10.10 install

  - by Ted

  I've read various threads on this after googling, including one on this site. I had Windows 7 installed on an SSD. I wanted to try Ubuntu so I created a partition for it on the SSD and booted with the live CD to install Ubuntu. Went through the install and somehow Ubuntu carved out another partition on the SSD rather than using the one I had already created. Windows 7 would then not boot but Ubuntu would. I booted with my 7 cd and ran the automatic startup repair, it didn't find any problems. I then ran the bootsect command on the drive with 7. It said it repaired the bootmgr but Windows still would not boot and now Ubuntu won't either. I read somewhere else that it may be due to the partition that 7 was on being changed during the install. I don't care about the Ubuntu installation but I don't want to lose the 7 install, can I delete the ubuntu partition through booting with the 7 cd? Will that do any good? Thank you all! I'm stumped even though I've done startup repairs before, just not after Ubuntu install.

  Read the article

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Hi, Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• "Server not found" errors all over after Wordpress installation

  - by picardo

  I uploaded my Wordpress blog from my local machine to Slicehost and then pointed the domain name to the IP address. Then I installed the blog as normal. Once I went to wp-login.php to login, though, I started getting "Server not found" errors. That was strange because the server process was still running, and I checked many times. I can't see anything wrong in the error log, or the access log either. This doesn't only affect Wordpress. I can't access phpmyadmin either now, which was mapped to a subdirectory of the same domain address. What is going on? Can anyone help? Edit: the blog is located on a subdomain. It's still accessible from IP address. The virtual host configs are ServerName and ServerAlias, both set to blog.mysite.com. When I changed those and restarted apache, phpmyadmin came back. Edit: also it's not a propagation issue because I installed the blog from the domain name. It's only when I tried to log into the admin section, I started getting these errors.

  Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >