Search Results

Search found 12423 results on 497 pages for 'dynamic controls'.

Page 305/497 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

• Minimize VirtualBox Hard Drive disk

  - by Aviv

  I have Ubuntu Server 10.04 TLS installed on a Virtual Machine in a VirtualBox. The size of the Hard Drive is dynamic growing hard drive and the maximum is 32GB. At the beginning i had 4GB on the Hard Drive and the size of the .vdi was 4GB. Lately the size of data on the disk is 15GB but the size of the .vdi is almost 32GB. Why is that? How can i pack / optimize / defrag the HD so it will be the same size of the data on the disk? Thanks.

  Read the article

• Very slow loading pages with router

  - by user984621

  I bought new router - this one: http://www.tp-link.com/en/products/details/?model=TL-WR841ND and the problem is, that the loading pages is so slow, even sometimes the pages aren't loaded at all. Is the same, when I have on the Mac OS or Windows. Below are the informations from the router-admin section: LAN IP Address: 192.168.2.1 Subnet Mask: 255.255.255.0 WAN IP Address: 192.168.1.100 Dynamic IP Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.254 DNS Server: 89.203.178.2 , 10.14.2.1 How can I fix this problem? Is almost impossible to use the internet this way.

  Read the article

• win2008 R2 server core software RAID

  - by shimonyk

  I am trying to set up software raid on a win2008 R2 server core. I have the disks configured as dynamic. In the server manager gui, i can see the disks, but when i right click, the option to set up "new mirrored volume" is not listed. I tried it with the command line using diskpart, and it gives the error "Virtual Disk Service Error: The size of the extent is less than the minimum." The drive are a new pair of 1Tb disks. Is this not supported in server core, or am i missing something else? Thank you

  Read the article

• ssh: which side is running the SOCKS proxy?

  - by Barry Brown

  When I set up a tunnel using dynamic forwarding (ssh -D), which side is running the SOCKS proxy? That is, is the proxy running on the local end (client) or the remote end (server)? Here's the situation: I want to set up several tunnels chained together using -L. Should the -D tunnel be the last one in the chain or the first one? Edit: I found the answer to the second paragraph on Super User (the -D tunnel should be at the remotest end). But I'd still like to know where the proxy code is running.

  Read the article

• Cannot SSH into Amazon EC2 instance

  - by edelwater

  I read: Cannot connect to ec2 instance http://stackoverflow.com/questions/5635640/cannot-ssh-into-amazon-ec2-instance Amazon EC2 instance ssh problems etc... But could not fix it: suddenly (after a year of service, no changes on my winscp settings) it gives me "network error connection timed out" (im using ec2-user) (also from the amazon console). Log FILE: http://pastebin.com/vNq6YQvN All Sites that run on it run fine port 22 is allowed (never changed it) (security group) using the correct ec2-user and domain via my winscp / putty i can connect to other hosting (via ssh) update: SOLVED. I spend 2 days without looking at my own IP address .... (since it did not change the past 3 years....). Your comments made the spark in my brain. thank you so much. (and only now i find dozens of discussions from angry users that the static addresses from my provider are changed to dynamic ones: http://gathering.tweakers.net/forum/list_messages/1501005/12 ...)

  Read the article

• Can Ping but Cannot Telnet directly to SQL Server 2012 Cluster Nodes

  - by tresstylez

  We have a monitoring tool (Solarwinds Orion) that needs to connect to a 2-node failover SQL Server Cluster. For reasons outside of our control -- we cannot monitor the CLUSTER IP directly at this time, so we have fallen back to monitoring each cluster node IP directly. This is not working. Upon troubleshooting, we tried to test that the cluster node was listening on the proper (fixed) port by using telnet to the cluster node IP/port -- and the telnet failed. However, telnet'ing to the Cluster IP/Port was SUCCESSFUL! Each node has its own IP. Each node is listening on the identical FIXED port. Each node has Dynamic Ports disabled. Each node can be PINGED successfully from the monitoring tool. Windows Firewall is DISABLED. How can I troubleshoot why I cannot telnet to the listening port on the cluster nodes?

  Read the article

• How to dynamically insert text from an external file in a Powerpoint slide?

  - by Xavier Nodet

  My goal is to ensure that the C++ code I insert in my presentation compiles correctly. I therefore thought I'd have each example in a separate file (so that I can compile it), and include the text from those files in the Powerpoint slides... I want this 'inclusion' to be dynamic, so that if I change the code in a file, the slides are automatically updated. Is it possible? Will I have to use LaTeX instead of Powerpoint? Any other suggestion about how to solve this problem? Thanks.

  Read the article

• How do I turn off caching in IIS7?

  - by jammus

  Hello. I'm developing an ASP classic site under Windows 7 (form a queue ladies). The problem is IIS seems to be heavily making use of its cache for both static and dynamic content which really conflicts with my 'make a small change, alt-tab, hit ctrl-F5' development style. Changes made to .asp files may take two or three refreshes to show up where as changes to .js files can take 20 times as many. How do I go about turning the caching off on my development machine? Cheers. in b4 stop using asp classic

  Read the article

• Excel - add target line to stacked bar chart

  - by Chris W

  I've got a stacked bar chart. I'm displaying a set of floating bars to represent hi/low ranges for some metrics, by using a transparent fill on the bottom section of the bar I achieve the desired look. What I now need to do is add a horizontal line across the chart to indicate how a particular users score relates to all of these hi/low ranges therefore the placement of this line needs to be dynamic based on a value in a cell. Is there anyway to do this as I can't find an easy option. If this was a simple bar chart I could add the target scores as new series and use the line chart type but I don't seem able to overlay a second series on the stacked bar chart. I'm using 2003 at the moment but run this in 2007 if that helps.

  Read the article

• Ubuntu 12.04 host lookups extremely slow

  - by tubaguy50035

  I'm having issues with one of my servers taking a long time to look up host names. This is an Ubuntu 12.04 box, so I've tried following the new resolvconf directives. In my /etc/network/interfaces file, I defined my name servers like this: auto eth0 iface eth0 inet static address someaddress netmask 255.255.255.0 gateway 198.58.103.1 dns-nameservers 74.14.179.5 72.14.188.5 In my /etc/resolv.conf, I see these name servers, like this: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 74.14.179.5 nameserver 72.14.188.5 On another box, I edited the resolv.conf directly as directed by my hosts' setup help files. It looks like this: domain members.linode.com search members.linode.com nameserver 72.14.179.5 nameserver 72.14.188.5 options rotate This second box has no issues with host name look ups and responds quite quickly. Could not having the domain and search directives make my look ups slow? By slow, I mean it's taking anywhere from 5 to 15 seconds to find the IP address of a host.

  Read the article

• Is there a way to automate testing for a GNS3 network topology?

  - by Chedy2149

  I'm working on an MPLS backbone topology using GNS3, this topology includes configuration of several networking technologies such as IPv6, BGP, OSPF, IPv6 to IPv4 dynamic tunneling, MPLS based VPNs, MPLS based traffic engineering... So I'm a beginner with basic knowledge in networking (Ipv4 addressing, basic routing and switching) and I can't just easly test if my topology works or not, moreover fiddling with configuration I've noticed that sometimes when getting MPLS config right and missing BGP config all my topology is messed up. Given that I use Cisco 7200 series routers, is there any way to build a test harness for my topology in order to guarentee correctness with a single push button automated process?

  Read the article

• How to change hybrid disk to basic disk in windows 7?

  - by Marco

  I created a partition E and then deleted the partition. After that I extended my partition C (where OS was installed) to take the space. My partition C became hybrid drive. My hp notebook does not have DVD rom and the notebook only came with an recovery image (I also have a paragon disc image). My computer has some problems now and I want to recover it by either the factory format or the paragon disc image. However, none of them works. I know it is because my disc has become hybrid disk. My question is how to fix the dynamic disk problem?

  Read the article

• How do I turn on bluetooth on a Dell Latitude E6410?

  - by Rob Stevenson-Leggett

  I have recently acquired a Dell Latitude E6410. It's great but I can't get Bluetooth to work. I have enabled bluetooth for the Wireless Switch in the BIOS. However whenever I try and install the bluetooth driver from the CD I get the message: Activate Bluetooth using the Wireless Switch. There is only a cancel button on this dialog. There is no bluetooth icon on any function key and I have tried switching the what I assume to be the Wireless Switch (the switch which controls wireless internet, on the right side of the laptop) to on and off positions to no avail. Does anyone know what the problem is?

  Read the article

• Do you know of any ways to effectively manage a triple screen setup brightness?

  - by nizm0

  I use a desktop with multiple monitors I have tried F.lux and it is a great app for changing the color from 3500k-6500k... but doesn't adjust screen brightness. (I recommend you try it) I've googled for hours trying to find an app that will work to let me easily manage screen brightness either by a "dim when idle" or a dynamically updating screen brightness based on the time of day. Windows 7 desktop doesn't seem to have options for me to adjust brightness on the system, and manually changing three separate monitors is too much of a chore? Anybody have some recommendations? Perhaps a way to script this, knowledge of how to use the supposed dynamic screen brightness functions that Windows was supposed to add in Windows 7?

  Read the article

• How to play two or more videos side by side in a syncronized fashion in Linux?

  - by Grumbel

  I have two (or more) video files that I want to play side by side. I could do that simply by opening them in two seperate windows, but that would also seperate all the controls (play/pause/forward/...). I want to play them in a synchronized fashion so that pause/forwarding/... works on both videos simultaneously so that they always stay at the same timecode and they don't go out of sync. How would I accomplish that in Linux? This is needed for viewing only, so compositing them into a new video file first should be avoided if possible, but if there isn't an easy way to do that, I welcome answers doing it with composition as well.

  Read the article

• Psexec issue when running an application on a Windows Server 2008 R2 machine from a 2003 R2 machine

  - by Vermin

  I am trying to run an application on a Windows Server 2008 R2 machine from a Windows Server 2003 R2 machine using a batch file with the following line of code in a batch file: psexec \\nightmachine -u DOMAIN\User -p Password -i "C:\FilePath\Application.exe" argument1 argument2 The application fails to run correctly when started using psexec, but the application will run correctly if I have logged into the nightmachine with the same user and started it from its file path via cmd. I have been able to get hold of the error returned in the application from its log and the exception returned is the following: System.DllNotFoundException: Unable to load DLL 'rasapi32.dll': A dynamic link library (DLL) initialization routine failed. (Exception from HRESULT: 0x8007045A) After searching for that error code on the net, there are a lot of posts saying that this is caused by file corruption, but I cant see why that would be the case as the application will run normally when not being run from psexec. (the user is an administrator on both machines) Can anyone please help me on this? If any more information is needed to help solve this issue then please ask and I will do my best to post it.

  Read the article

• automated printouts from a wireless printer

  - by Piotr

  I have a wireless printer which is always on, and an always on fanless linux server. Looking at the mprinter project on Kickstarter I started to wonder if there is an app somewhere in the internet already that will allow to prepare an automated daily printout based on some settings. things to be printed could include - weather forecast for my locations, todo`s scheduled for that day, a "quote of a day" or "word of the day", stats from google analytics for my site, and many more ... I would set a printout at 6:15 every work day so its on my printer when I am already up, having a coffee. anyone knows something that can be used for such purpose? While I know this can be done by combining the power of TeX, cron and a script language to manage the dynamic part of the PDF I believe this is a use case someone has already addressed.

  Read the article

• Thunderbird is unable to find server in DHCP controlled network.

  - by Skizz

  I have a network which consists of linux server and a combination of WinXP, Win7 and linux clients. All the systems are given dynamic IP addresses by the router which connects them all together. The server hosts an IMAP mail server. On Win7 and WinXP Thunderbird can access the IMAP server without any problems. On the linux client, using the same IMAP parameters, Thunderbird is unable to connect to the server. How do I get Thunderbird to find the server? I'm not sure if this is a linux system configuration problem or a Thunderbird issue. Additional note: The linux client is running Gnome, the server has a series of Samba shares defined. In the client, doing Places-Connect to Server and selecting Windows Share and specifying the server name, the Samba share is mounted OK.

  Read the article

• Have Free website Hosting with Google App Engine

  - by mickthompson

  I'm reading about Google App Engine. I'm creating a bunch of simple dynamic websites in java. I'm considering to use Google App Engine and setup my clients' website on it. In this way I've only to register a domain www.myclietdomain.com and then point that to the GoogleAppEngine application... In this way I plan to avoid hosting costs. Infact I'm paying even for hosting few static html pages... Do you think that is possible to use Google App Engine for this scope?

  Read the article

• How to make a server check it's own availability on the web?

  - by Javawag

  Hi all, Just a quick question – my server is running at my house serving www pages at www.javawag.com. The problem is that my home internet connection keeps dropping randomly - for about 10 mins at a time. This is only an intermittent problem and will go away soon I hope. However, my server doesn't recover properly - when the connection comes back, I can still access it at 192.168.0.8 (locally) without any issue, but at www.javawag.com there's no reply! (Just an aside - my home internet connection is dynamic ISP, the domain www.javawag.com points to javawag.dyndns.org which in turn points to my IP, updated every minute by ddclient on the server) Is there some way for the server to check if it's accessible from the outside world periodically, and if not restart Apache/reboot? Oh, and if I reboot the problem fixes itself also! Javawag

  Read the article

• What are possible causes of keyboard lag on my desktop machine?

  - by Jer

  I am running Windows 7 and began experiencing keyboard lag in most applications, and it seems to be getting worse. Certain websites are the worst - on some, I can type a sentence, take my hands off the keyboard, and watch the characters continue to appear on the screen for several seconds. Others are not as bad, but still noticeable and annoying. I just started noticing it in non-browser applications (e.g. Outlook) as well. I've disabled all extensions in Firefox, rebooted my machine, and that did nothing. There is nothing using much memory or cpu cycles, even when the lag is occurring. This is a machine at work with very strict controls over what can be installed, so the chances of any kind of malware are very slim. I don't believe anything as been installed since before the problem started. What could be causing this, and/or what can I do to debug?

  Read the article

• Two routers, one off-site, same ISP-assigned static IP. A recipe for conflict?

  - by boost

  This is the situation I've inherited: There are two routers, one off-site. Both are connected to the ISP. The ISP assigns both of them the same static IP (or so it seems). Presumably, the network problems we're having are related to the idea that you can't have two instances of the same IP. So we rang up the folk off-site and told them to turn off the router. Now everything's working okay here. How do I get around this? Get another static IP? Figure out how to get the router to ask for a dynamic IP (as we're not using the static IP for anything)?

  Read the article

• virtual box strectch to fit resolution

  - by Scarface

  Hey guys I have a really annoying problem, that I hope someone has figured out. I just installed ubuntu on virtual box and installed the guest additions so everything was great. I had a resolution that stretched across my screen from left to right and the only virtual box components that were visible were the windows vista title bar : minimize/exit/maximize buttons and virtual box controls at the bottom. Now all of a sudden now that I have installed the ubuntu 170mb of automatic updates, I see vertical and horizontal scroll bars that are part of virtual box and the ubuntu resolution will not stretch across my screen anymore. What I want is a ubuntu resolution that will stretch to fit the maximized window of virtual box, and remove the scroll bars. If anyone has any ideas, I would really appreciate it.

  Read the article

• Using DNS entries to determine location

  - by Raphink

  I'm trying to think of a clean way to determine the location of machines (mainly, which datacenter they belong to) based on their network settings. I would like it to be dynamic, and I'm thinking of using special DNS records that would be specific to the DNS server in each datacenter. For example, you could have: root@machine1# dig TXT mysite ... mysite 3600 IN TXT "DC1" ... root@machine2# dig TXT mysite ... mysite 3600 IN TXT "DC2" ... etc. I know that DNS has a special LOC record for location, but it takes coordinates, so it doesn't help in my case. Is there a standard way of addressing this issue, another special type of record for it, or some standard entries in TXT records?

  Read the article

• Word 2007 "Out of Memory or Disk Space" Error on launch

  - by Adam

  Word 2007 is installed on a Vista Home Premium machine and whenever it starts up it opens what appears to be a dynamic installer to do something and then throws up the "Out of Memory or Disk Space" error. Word 2007 never completes starting up. Reinstalling Word hasn't helped and if I can avoid reinstalling Windows until Windows 7 is released and get Word working in the mean time, that would be ideal. I've been looking around for a solution, once of which seemed to point to a problem with the user account. I created a second user on the machine and Word still had the same problem. The other solution that seems possible is a corrupted normal.dot/normal.dotm file. However, even in the location it should be, I can't seem to find it. Am I going in the right direction with this? Is there another solution I haven't come across that will fix this? If it is possible that renaming normal.dot/normal.dotm how can I find it?

  Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >