Search Results

Search found 11954 results on 479 pages for 'gets'.

Page 305/479 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

  • Cisco ASA: Routing packets based on where the connections started from

    - by DrStalker
    We have a Cisco ASA 5505 (version 8.2(2)) with three interfaces: outside: IP address 11.11.11.11, this is the default route inside: IP address 10.1.1.1, this is the local subnet newlink: 22.22.22.22, this is a new internet connection. We need to move VPN users from the 11.11.11.11 address to the 22.22.22.22 address, and we're using SSH on the ASA as to test and sort out the routing. The problem we have is this: If we define a particular IP as being on a static route out the newlink interface then it can SSH to 22.22.22.22 fine. If we do not define a static route then the traffic hits the ASA, but the return traffic does not come back over newlink; presumably it gets sent over the outside interfcae as that is the default route. We can't define a static route for each remote endpoint because there are dialup VPN users, who obviously change IP a lot What we need to do is configure the ASA so if a connection comes in on the newlink interface then the outgoing packets for that go over the newlink interface, not the default route. With iptables this should be do-able by marking the connection and doing mark-routing, but what is the equivalent for a Cisco ASA?

    Read the article

  • org-sort multi: date/time (?d ?t) | priority (?p) | title (?a)

    - by lawlist
    Is anyone aware of an org-sort function / modification that can refile / organize a group of TODO so that it sorts them by three (3) criteria: first sort by due date, second sort by priority, and third sort by by title of the task? EDIT: I believe that org-sort by deadline (?d) has a bug that cannot properly handle undated tasks. I am working on a workaround (i.e., moving the undated todo to a different heading before the deadline (?d) sort occurs), but perhaps the best thing to do would be to try and fix the original sorting function. Development of the workaround can be found in this thread (i.e., moving the undated tasks to a different heading in one fell swoop): How to automate org-refile for multiple todo EDIT: Apparently, the following code (ancient history) that I found on the internet was eventually modified and included as a part of org-sort-entries. Unfortunately, undated todo are not properly sorted when sorting by deadline -- i.e., they are mixed in with the dated todo. ;; multiple sort (defun org-sort-multi (&rest sort-types) "Multiple sorts on a certain level of an outline tree, or plain list items. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Example: To sort first by TODO status, then by priority, then by date, then alphabetically (case-sensitive) use the following call: (org-sort-multi '(?d ?p ?t (t . ?a)))" (interactive) (dolist (x (nreverse sort-types)) (when (char-valid-p x) (setq x (cons nil x))) (condition-case nil (org-sort-entries (car x) (cdr x)) (error nil)))) ;; sort current level (defun lawlist-sort (&rest sort-types) "Sort the current org level. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Defaults to \"?o ?p\" which is sorted by TODO status, then by priority" (interactive) (when (equal mode-name "Org") (let ((sort-types (or sort-types (if (or (org-entry-get nil "TODO") (org-entry-get nil "PRIORITY")) '(?d ?t ?p) ;; date, time, priority '((nil . ?a)))))) (save-excursion (outline-up-heading 1) (let ((start (point)) end) (while (and (not (bobp)) (not (eobp)) (<= (point) start)) (condition-case nil (outline-forward-same-level 1) (error (outline-up-heading 1)))) (unless (> (point) start) (goto-char (point-max))) (setq end (point)) (goto-char start) (apply 'org-sort-multi sort-types) (goto-char end) (when (eobp) (forward-line -1)) (when (looking-at "^\\s-*$") ;; (delete-line) ) (goto-char start) ;; (dotimes (x ) (org-cycle)) ))))) EDIT: Here is a more modern version of multi-sort, which is likely based upon further development of the above-code: (defun org-sort-all () (interactive) (save-excursion (goto-char (point-min)) (while (re-search-forward "^\* " nil t) (goto-char (match-beginning 0)) (condition-case err (progn (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o) (forward-line)) (error nil))) (goto-char (point-min)) (while (re-search-forward "\* PROJECT " nil t) (goto-char (line-beginning-position)) (ignore-errors (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o)) (forward-line)))) EDIT: The best option will be to fix sorting of deadlines (?d) so that undated todo are moved to the bottom of the outline, instead of mixed in with the dated todo. Here is an excerpt from the current org.el included within Emacs Trunk (as of July 1, 2013): (defun org-sort (with-case) "Call `org-sort-entries', `org-table-sort-lines' or `org-sort-list'. Optional argument WITH-CASE means sort case-sensitively." (interactive "P") (cond ((org-at-table-p) (org-call-with-arg 'org-table-sort-lines with-case)) ((org-at-item-p) (org-call-with-arg 'org-sort-list with-case)) (t (org-call-with-arg 'org-sort-entries with-case)))) (defun org-sort-remove-invisible (s) (remove-text-properties 0 (length s) org-rm-props s) (while (string-match org-bracket-link-regexp s) (setq s (replace-match (if (match-end 2) (match-string 3 s) (match-string 1 s)) t t s))) s) (defvar org-priority-regexp) ; defined later in the file (defvar org-after-sorting-entries-or-items-hook nil "Hook that is run after a bunch of entries or items have been sorted. When children are sorted, the cursor is in the parent line when this hook gets called. When a region or a plain list is sorted, the cursor will be in the first entry of the sorted region/list.") (defun org-sort-entries (&optional with-case sorting-type getkey-func compare-func property) "Sort entries on a certain level of an outline tree. If there is an active region, the entries in the region are sorted. Else, if the cursor is before the first entry, sort the top-level items. Else, the children of the entry at point are sorted. Sorting can be alphabetically, numerically, by date/time as given by a time stamp, by a property or by priority. The command prompts for the sorting type unless it has been given to the function through the SORTING-TYPE argument, which needs to be a character, \(?n ?N ?a ?A ?t ?T ?s ?S ?d ?D ?p ?P ?o ?O ?r ?R ?f ?F). Here is the precise meaning of each character: n Numerically, by converting the beginning of the entry/item to a number. a Alphabetically, ignoring the TODO keyword and the priority, if any. o By order of TODO keywords. t By date/time, either the first active time stamp in the entry, or, if none exist, by the first inactive one. s By the scheduled date/time. d By deadline date/time. c By creation time, which is assumed to be the first inactive time stamp at the beginning of a line. p By priority according to the cookie. r By the value of a property. Capital letters will reverse the sort order. If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies a function to be called with point at the beginning of the record. It must return either a string or a number that should serve as the sorting key for that record. Comparing entries ignores case by default. However, with an optional argument WITH-CASE, the sorting considers case as well." (interactive "P") (let ((case-func (if with-case 'identity 'downcase)) (cmstr ;; The clock marker is lost when using `sort-subr', let's ;; store the clocking string. (when (equal (marker-buffer org-clock-marker) (current-buffer)) (save-excursion (goto-char org-clock-marker) (looking-back "^.*") (match-string-no-properties 0)))) start beg end stars re re2 txt what tmp) ;; Find beginning and end of region to sort (cond ((org-region-active-p) ;; we will sort the region (setq end (region-end) what "region") (goto-char (region-beginning)) (if (not (org-at-heading-p)) (outline-next-heading)) (setq start (point))) ((or (org-at-heading-p) (condition-case nil (progn (org-back-to-heading) t) (error nil))) ;; we will sort the children of the current headline (org-back-to-heading) (setq start (point) end (progn (org-end-of-subtree t t) (or (bolp) (insert "\n")) (org-back-over-empty-lines) (point)) what "children") (goto-char start) (show-subtree) (outline-next-heading)) (t ;; we will sort the top-level entries in this file (goto-char (point-min)) (or (org-at-heading-p) (outline-next-heading)) (setq start (point)) (goto-char (point-max)) (beginning-of-line 1) (when (looking-at ".*?\\S-") ;; File ends in a non-white line (end-of-line 1) (insert "\n")) (setq end (point-max)) (setq what "top-level") (goto-char start) (show-all))) (setq beg (point)) (if (>= beg end) (error "Nothing to sort")) (looking-at "\\(\\*+\\)") (setq stars (match-string 1) re (concat "^" (regexp-quote stars) " +") re2 (concat "^" (regexp-quote (substring stars 0 -1)) "[ \t\n]") txt (buffer-substring beg end)) (if (not (equal (substring txt -1) "\n")) (setq txt (concat txt "\n"))) (if (and (not (equal stars "*")) (string-match re2 txt)) (error "Region to sort contains a level above the first entry")) (unless sorting-type (message "Sort %s: [a]lpha [n]umeric [p]riority p[r]operty todo[o]rder [f]unc [t]ime [s]cheduled [d]eadline [c]reated A/N/P/R/O/F/T/S/D/C means reversed:" what) (setq sorting-type (read-char-exclusive)) (and (= (downcase sorting-type) ?f) (setq getkey-func (org-icompleting-read "Sort using function: " obarray 'fboundp t nil nil)) (setq getkey-func (intern getkey-func))) (and (= (downcase sorting-type) ?r) (setq property (org-icompleting-read "Property: " (mapcar 'list (org-buffer-property-keys t)) nil t)))) (message "Sorting entries...") (save-restriction (narrow-to-region start end) (let ((dcst (downcase sorting-type)) (case-fold-search nil) (now (current-time))) (sort-subr (/= dcst sorting-type) ;; This function moves to the beginning character of the "record" to ;; be sorted. (lambda nil (if (re-search-forward re nil t) (goto-char (match-beginning 0)) (goto-char (point-max)))) ;; This function moves to the last character of the "record" being ;; sorted. (lambda nil (save-match-data (condition-case nil (outline-forward-same-level 1) (error (goto-char (point-max)))))) ;; This function returns the value that gets sorted against. (lambda nil (cond ((= dcst ?n) (if (looking-at org-complex-heading-regexp) (string-to-number (match-string 4)) nil)) ((= dcst ?a) (if (looking-at org-complex-heading-regexp) (funcall case-func (match-string 4)) nil)) ((= dcst ?t) (let ((end (save-excursion (outline-next-heading) (point)))) (if (or (re-search-forward org-ts-regexp end t) (re-search-forward org-ts-regexp-both end t)) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?c) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward (concat "^[ \t]*\\[" org-ts-regexp1 "\\]") end t) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?s) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-scheduled-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?d) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-deadline-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?p) (if (re-search-forward org-priority-regexp (point-at-eol) t) (string-to-char (match-string 2)) org-default-priority)) ((= dcst ?r) (or (org-entry-get nil property) "")) ((= dcst ?o) (if (looking-at org-complex-heading-regexp) (- 9999 (length (member (match-string 2) org-todo-keywords-1))))) ((= dcst ?f) (if getkey-func (progn (setq tmp (funcall getkey-func)) (if (stringp tmp) (setq tmp (funcall case-func tmp))) tmp) (error "Invalid key function `%s'" getkey-func))) (t (error "Invalid sorting type `%c'" sorting-type)))) nil (cond ((= dcst ?a) 'string<) ((= dcst ?f) compare-func) ((member dcst '(?p ?t ?s ?d ?c)) '<))))) (run-hooks 'org-after-sorting-entries-or-items-hook) ;; Reset the clock marker if needed (when cmstr (save-excursion (goto-char start) (search-forward cmstr nil t) (move-marker org-clock-marker (point)))) (message "Sorting entries...done"))) (defun org-do-sort (table what &optional with-case sorting-type) "Sort TABLE of WHAT according to SORTING-TYPE. The user will be prompted for the SORTING-TYPE if the call to this function does not specify it. WHAT is only for the prompt, to indicate what is being sorted. The sorting key will be extracted from the car of the elements of the table. If WITH-CASE is non-nil, the sorting will be case-sensitive." (unless sorting-type (message "Sort %s: [a]lphabetic, [n]umeric, [t]ime. A/N/T means reversed:" what) (setq sorting-type (read-char-exclusive))) (let ((dcst (downcase sorting-type)) extractfun comparefun) ;; Define the appropriate functions (cond ((= dcst ?n) (setq extractfun 'string-to-number comparefun (if (= dcst sorting-type) '< '>))) ((= dcst ?a) (setq extractfun (if with-case (lambda(x) (org-sort-remove-invisible x)) (lambda(x) (downcase (org-sort-remove-invisible x)))) comparefun (if (= dcst sorting-type) 'string< (lambda (a b) (and (not (string< a b)) (not (string= a b))))))) ((= dcst ?t) (setq extractfun (lambda (x) (if (or (string-match org-ts-regexp x) (string-match org-ts-regexp-both x)) (org-float-time (org-time-string-to-time (match-string 0 x))) 0)) comparefun (if (= dcst sorting-type) '< '>))) (t (error "Invalid sorting type `%c'" sorting-type))) (sort (mapcar (lambda (x) (cons (funcall extractfun (car x)) (cdr x))) table) (lambda (a b) (funcall comparefun (car a) (car b))))))

    Read the article

  • Swap space maxing out - JVM dying

    - by travega
    I have a server running 3 WordPress instances, MySql, Apache and the play framework 2.0 on 64m initial & max heap. If I increase the max heap of the JVM that play is running in even by 16m I see the 128m of swap space steadily fill up until the the JVM dies. I notice that it is only when I am plugging away at the wordpress sites that the JVM will die. I assume this is because the JVM is not asking for memory at the time so gets collected. I notice that when I restart Apache I reclaim about half of my swap and RAM. So is there some way I can configure apache to consume less memory? Also what could be causing the swap space to get so heavily thrashed with just 16m added to the max heap size of the JVM? Server running: Ubuntu 12.04 RAM: 408m Swap: 128m Apache mods: alias.conf alias.load auth_basic.load authn_file.load authz_default.load authz_groupfile.load authz_host.load authz_user.load autoindex.conf autoindex.load cgi.load deflate.conf deflate.load dir.conf dir.load env.load mime.conf mime.load negotiation.conf negotiation.load php5.conf php5.load proxy_ajp.load proxy_balancer.conf proxy_balancer.load proxy.conf proxy_connect.load proxy_ftp.conf proxy_ftp.load proxy_http.load proxy.load reqtimeout.conf reqtimeout.load rewrite.load setenvif.conf setenvif.load status.conf status.load

    Read the article

  • Logic behind SCCM 2012 required PXE deployments

    - by Omnomnomnom
    I'm in the process of setting up Windows 7 deployment through PXE boot, with Microsoft SCCM 2012. The imaging itself works very well, but I have a question about the logic behind PXE deployments. My setup is the following: My Windows 7 deployment task sequence is deployed to the unknown computers group. (not required, press F12 to start installing) OSDComputerName variable is also set on the unknown computers group, so unknown computers that are being imaged will prompt for a pc name. The computer then becomes known in SCCM and is added to the correct collection(s). But if I want to reïnstall windows on a known computer things are different: I can do a required deployment of the imaging task sequence to the collection of computers. Then windows installs through PXE, without any human interaction, keeping the original computer name. But because the initial deployment was not required, the "required PXE deployment" flag is not set. So as soon as I add a new computer to a collection with a required PXE deployment, it will start to reïnstall windows again. I can also deploy the imaging task sequence to the new unknown computers as required, so the flag gets set initially. But then it does not prompt for a computer name. (and it generates a name like MININT-xxx) Which is also sort of what I want. Because when i want to re-install a machine, I want it to install without interaction. How can I solve this?

    Read the article

  • How to configure amavisd-new for only scanning on particular senders/servers?

    - by mailq
    I'd like to know how to configure amavisd-new to only scan for Spam on particular clients (IPs, CIDRs or hostnames) or alternatively sender's email domain. I know that it is possible to do it on a recipient's mail address but not on how to do it for the sender's mail address. It is even possible to do it on a recipient's IP address with policy banks. But my approach should be to be independent of recipient and only relay on the sender. What I want to accomplish is to only scan mails originating from Yahoo, Google, Hotmail and the other big senders. So it is easier to configure which senders should be observed than the ones that shouldn't. I known that it is easier to achieve on the MTA side, but that is not part of the question because I already go a solution on the MTA side. I want to do it on amavisd-new. And it doesn't help to know how to put senders on a whitelist, as this still means that the mail goes through all the scanning but then gets a high negative score. The mail shouldn't be scanned at all unless sent by the big players. So which parameters in amavisd-new is the right one to enable scanning for particular senders and only for these?

    Read the article

  • Apache2, making my site publicly available

    - by Shackler
    Hello, I want to make my apache 2 development server public to the internet, it is a Django based website. Here is my apache2 config: <VirtualHost *:80> Alias /media /home/user/myproject/statics Alias /admin_media /home/myuser/django/Django-1.1.1/django/contrib/admin/media WSGIScriptAlias / /home/myuser/myproject/myproject_wsgi.py WSGIDaemonProcess myproject user=myuser group=myuser threads=25 WSGIProcessGroup myproject </VirtualHost> When I do netstat -lntup I get: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN - tcp6 0 0 :::80 :::* LISTEN - tcp6 0 0 :::22 :::* LISTEN - tcp6 0 0 ::1:631 :::* LISTEN - udp 0 0 0.0.0.0:5353 0.0.0.0:* - udp 0 0 0.0.0.0:38582 0.0.0.0:* I connect with ADSL thus I am behind a router. For this I have made my computer DMZ enabled to my machine. What can be the problem? When I try to login with my ip, I get my routers config page, when a friend tries to connect to me from internet, he gets "not authorized".

    Read the article

  • Alternatives to Splunk?

    - by MichaelGG
    I'm pretty impressed with Splunk, especially version 4. Pretty graphs, alerting (Enterprise only), and fast, accurate, searching. It's a great product. However, the cost just way too high to consider for full production use for our company. All we really need is to be able to index different logs in a central place, and have reasonable searching on that. Having alerts based on a saved search is also really nice. We don't really go beyond that. In fact, our biggest usage has been in deploying new applications. Everything gets logged via log4net to either the Event log on Windows or a text file on Linux. Splunk makes it pretty easy to quickly search across those to make sure all the parts of the app are working ok -- that's saved us tons of time versus hunting down individual logging sources. What alternatives exist in this market? I have a sinking feeling Splunk's pricing is so high because they have the best product by far, and they know it. We want the server to run on Windows. I'd be open to a split model, using one product for general logs (collect via syslog/Snare), and a dedicated product for our custom apps (like Log4Net Dashboard). Would using a simple syslog server such as Kiwi, sent to SQL Server (perhaps with fulltext enabled) work? I'd hope the cost should be well under 5 figures, USD. (And yes, I know, we're cheap. We're a startup with little money, and BizSpark takes care of all our MS licensing.) Edit: I should add, we have about 10 physical servers, 20 VMs, and a couple firewalls and switches. 90% is Windows.

    Read the article

  • With a username passed to a script, find the user's home directory

    - by Clinton Blackmore
    I am writing a script that gets called when a user logs in and check if a certain folder exists or is a broken symlink. (This is on a Mac OS X system, but the question is purely bash). It is not elegant, and it is not working, but right now it looks like this: #!/bin/bash # Often users have a messed up cache folder -- one that was redirected # but now is just a broken symlink. This script checks to see if # the cache folder is all right, and if not, deletes it # so that the system can recreate it. USERNAME=$3 if [ "$USERNAME" == "" ] ; then echo "This script must be run at login!" >&2 exit 1 fi DIR="~$USERNAME/Library/Caches" cd $DIR || rm $DIR && echo "Removed misdirected Cache folder" && exit 0 echo "Cache folder was fine." The crux of the problem is that the tilde expansion is not working as I'd like. Let us say that I have a user named george, and that his home folder is /a/path/to/georges_home. If, at a shell, I type: cd ~george it takes me to the appropriate directory. If I type: HOME_DIR=~george echo $HOME_DIR It gives me: /a/path/to/georges_home However, if I try to use a variable, it does not work: USERNAME="george" cd ~$USERNAME -bash: cd: ~george: No such file or directory I've tried using quotes and backticks, but can't figure out how to make it expand properly. How do I make this work?

    Read the article

  • apache2 defaultsite redirect but not virtual host

    - by MMM
    I'm trying to set up a new server with several virtual hosts but also such that if the requested fqdn doesn't match a virtual host then the request is redirected to http://example.com/log.php?url=fqdn I have got the default host redirecting as desired however the virtual host that I have defined doesn't work. I'm testing using a different host and curl -I http://hostname.example.com:8080/ on the command line to read the html headers to check for the redirect header directly rather than following it with a browser (to avoid any caching issues). I have defined a virtualhost as the fqdn of the server but when I use curl to request that virtualhost I get redirected. If I request the server by any other name which doesn't have a virtualhost defined I also get redirected. apache version is 2.2.16 on ubuntu The config (concatenated together in order from a couple of different files) is as follows: Listen 8080 NameVirtualHost * <VirtualHost _default_> ServerAdmin [email protected] RewriteEngine On RewriteRule ^(.*)$ http://example.com/log.php?url=%{HTTP_HOST}$1 [R=302,L] </VirtualHost> <VirtualHost *> <Directory "/var/www"> allow from all Options Indexes </Directory> DocumentRoot /var/www ServerName hostname.example.com </VirtualHost> I've also tried ServerName values of hostname.example.com:* and hostname.example.com:8080 In case I wasn't clear enough: anything.anything.any/something requested from my server should redirect to example.com/log.php?url=anything.anything.any/something foo.example.com (not defined as a VirtualHost) requested from my server should redirect to example.com/log.php?url=foo.example.com hostname.example.com (defined as a VirtualHost) requested from my server should return an html document anothername.example.com (also defined as a VirtualHost) requested from my server should return an html document It turns out that because the servers own fqdn is hostname.example.com that gets redirected to the Default VirtualHost even if there is a named VirtualHost for it. Other fqdn's that are not the same as the servers fqdn work as I intended.

    Read the article

  • Problems sending email using .Net's SmtpClient

    - by Jason Haley
    I've been looking through questions on Stackoverflow and Serverfault but haven't found the same problem mentioned - though that may be because I just don't know enough about how email works to understand that some of the questions are really the same as mine ... here's my situation: I have a web application that uses .Net's SmtpClient to send email. The configuration of the SmtpClient uses a smtp server, username and password. The SmtpClient code executes on a server that has an ip address not in the domain the smtp server is in. In most cases the emails go without a problem - but not AOL (and maybe others - but that is one we know for sure right now). When I look at the headers in the message that was kicked back from AOL it has one less line than the successful messages hotmail gets: AOL Bad Message: Received: from WEBSVRNAME ([##.###.###.###]) by domainofsmtp.com with MailEnable ESMTP; Mon, 18 Jun 2012 09:48:24 -0500 MIME-Version: 1.0 From: "[email protected]" <[email protected]> ... Good Hotmail Message: Received: from mail.domainofsmtp.com ([###.###.###.###]) by subdomainsof.hotmail.com with Microsoft SMTPSVC(6.0.3790.4900); Thu, 21 Jun 2012 09:29:13 -0700 Received: from WEBSVRNAME ([##.###.###.###]) by domainofsmtp.com with MailEnable ESMTP; Thu, 21 Jun 2012 11:29:03 -0500 MIME-Version: 1.0 From: "[email protected]" <[email protected]> ... Notice the hotmail message headers has an additional line. I'm confused as to why the Web server's name and ip address are even in the headers since I thought I was using the SmtpClient to go through the smtp server (hence the need for the username and password of a valid email box). I've read about SPFs, DKIM and SenderID's but at this point I'm not sure if I would need to do something with the web server (and its ip/domain) or the domain the smtp is coming from. Has anyone had to do anything similiar before? Am I using the smtp server as a relay? Any help on how to describe what I'm doing would also help.

    Read the article

  • configuring vsftpd anonymous upload. Creates files but freezes at 0 bytes

    - by Wayne
    vsftpd on ubuntu after sudo apt-get install vsftpd Then did configuration as in the attached /etc/vsftpd.conf file. Anonymous ftp allows cd to the upload directly and allows put myfile.txt which gets created on the server but then the client hangs and never proceeds. The file on the server remains at 0 bytes. Here's the folders and permissions: root@support:/home/ftp# ls -ld . drwxr-xr-x 3 root root 4096 Jun 22 00:00 . root@support:/home/ftp# ls -ld pub drwxr-xr-x 3 root root 4096 Jun 21 23:59 pub root@support:/home/ftp# ls -ld pub/upload drwxr-xr-x 2 ftp ftp 4096 Jun 22 00:06 pub/upload root@support:/home/ftp# Here's the vsftpd.conf file: root@support:/home/ftp# grep -v '#' /etc/vsftpd.conf listen=YES anonymous_enable=YES write_enable=YES anon_upload_enable=YES dirmessage_enable=YES xferlog_enable=YES anon_root=/home/ftp/pub/ connect_from_port_20=YES chown_uploads=YES chown_username=ftp nopriv_user=ftp secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Here's a file example that attempted to upload: root@support:/home/ftp/pub/upload# ls -l total 0 -rw------- 1 ftp nogroup 0 Jun 22 00:06 build.out This is the client attempting to upload...it is frozen at this point: $ ftp 173.203.89.78 Connected to 173.203.89.78. 220 (vsFTPd 2.0.6) User (173.203.89.78:(none)): ftp 331 Please specify the password. Password: 230 Login successful. ftp> put build.out 200 PORT command successful. Consider using PASV. 553 Could not create file. ftp> cd upload 250 Directory successfully changed. ftp> put build.out 200 PORT command successful. Consider using PASV. 150 Ok to send data.

    Read the article

  • High Apache CPU usage, but low nginx - Configured correctly?

    - by Buckers
    We've just moved a website of ours over to a brand new high-spec Linux server (1x Intel Xeon E3-1230 v2 @ 3.30GHz, 8GB DDR3 ECC, 2x 128GB SATA SSD RAID1). The server has been configured to use nginx but we're not sure if its working correctly. The site always loads very fast to us (http://www.onedirection.net), but Plesk often sends us reports that the Apache CPU usage percentage reaches high leves, yet when we look at the nginx percentage it's always very low. We've come from a Windows background so are very new to Linux, but shouldn't nginx run INSTEAD of apache? Here's a screenshot from Plesk showing the CPU usage: http://www.pixelkicks.co.uk/_download/plesk.JPG The website gets around 20,000 visitors per day, and we use W3 Total Cache to get it running as fast as possible. MySQL has been optimised well. Memory usage is only running at 2GB of the 8GB. Does this look right? How can we tell that nginx is doing most of the work? Thanks, Chris.

    Read the article

  • AD server within another network - DNS issues

    - by Harry Muscle
    Here's a quick summary of the environment I support: we have a domain (domain A) that has about 20 client computers. The domain server for this domain and all the clients sit within the network infrastructure of a larger domain (domain B). All the computers get their network settings via DHCP from domain B's servers. I have no control and am unable to make changes to anything to do with domain B. The problem I have is that currently in order for my domain's (domain A) clients to be able to resolve the domain server and the shares on it they have their DNS server IP address set to domain A's domain server (via the default GPO). Unfortunately when a laptop (windows and mac) gets taken home, they are still looking for the domain server as their DNS server and obviously can't access the internet correctly outside of our environment. Ideally I need a solution where the machines use domain A's domain server as their DNS when inside the office and use what ever DNS server DHCP gives them when they are outside the office. However, since I have no control over the office DHCP server, I'm not sure how this can be accomplished. Any help and advice that anyone can offer is highly appreciated. Thanks, Harry P.S. The solution I'm trying to find needs to require no involvement from the user.

    Read the article

  • Ballooning Mac OS X kernel_task and Wired memory usage. How to diagnose / fix?

    - by user28930
    I have a very strange issue, which I'm having a hard time diagnosing as to the root cause. I have a Mac Pro (2008, 8-core 2.8 GHz, 8800GT) with 14 GB of RAM (recently upgraded because of this issue!). When I boot my system and log in, vm_stat / top / Activity Monitor will show that kernel_task has about 150 MB allocated, and the machine has about 800 MB of Wired memory being allocated. Even initially, 800 MB seems an awful lot of wired memory to be allocated with no applications running - but, it gets worse. (NB: Wired is locked, unswappable memory) After a very short time, sometimes triggered by something as simple as launching a terminal, kernel_task will balloon to 8-900 MB of Real Mem (RSIZE), and Wired Memory will accelerate to 1.6 GB (implying that all the extra memory requests are for wired RAM in the kernel). If I quit everything (I.E: no running applications, bar an activity monitor or terminal to view top), there is no appreciable reduction in either kernel_task RSIZE, or Wired Memory usage. Going the opposite way, and loading the system with tasks also shows that wired memory does not get reduced - and that importantly it is not reduced in preference to heavy swapping. If I log out and log back in again, it reduces a bit (450 MB kernel_task, 1.28 GB Wired), but not back to the start. I'm not running any wacky kexts - and futhermore, kextstat shows no huge memory allocations there; the largest being com.apple.nvidia.nv50hal at about 4 MB of Memory. The machine feels overall more sluggish when this has happened - unsurprisingly because such a huge amount of RAM has been marked as non-pageable. So I have a few questions: 1) Is there a good way to diagnose what has allocated all of this wired memory? It's often over 2 times the kernel_task size, running no applications. The real memory total doesn't seem to add up - it seems that there is a bunch of RAM that isn't being accounted for anywhere. 2) What is happening to cause the kernel to suddenly require 6 times as much memory?

    Read the article

  • IIS8 behind a VPN + Windows Server 2012 - how to properly bind IP+Port

    - by ryugen
    This is my first question so I hope I'm going to give you enough information. I'm running Windows Server 2012 within the Hyper-V environment of my Windows 8 machine. Within Windows Server 2012 I'm running a VPN tool based on openVPN to hide my real IP. When I run IIS8 with the VPN disconnected it works flawlessly through the Internet (port 80 forwarded correctly). But as soon as I connect to the VPN I can't reach my site through the domain anymore. Now I tried basically everything I know which is why I'm asking you guys. I tried binding IIS8 to the IP of my virtual ethernet card. I tried changing the priority of the NIC through the "Network and sharing center" via the advanced tab. I used ipconfig /flushdns in case there was something wrong in the DNS handling. Hell, I even turned off the Windows firewall. I also used a port scanner to verify the problem. The webserver is reachable on port 80 with VPN disconnected and immediately gets unreachable on connect. Theoretically both IPs (my regular one AND the VPN) should be reachable or at least not impair the other one right? Do you have any other suggestion? Do I have to route something somewhere somehow?

    Read the article

  • Get details / solve issue with a kernel panic?

    - by Joseph
    I have a Lenovo T430 running Linux Mint 13 (MATE): joseph:~$ uname -a Linux joseph-T430-LM 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I installed Mint immediately after getting the laptop about two weeks ago, and have noticed that about once a day, the computer will completely freeze up- I can't use Ctrl+Alt+Backspace to restart X, I can't use Ctrl+Alt+F1 to get a text only terminal, can't move mouse, can't type, and if any music was playing it just gets stuck in about a 1-second loop. There is a Windows partition, but I haven't had any issues in Windows. I couldn't find a common thread between the freezes, they were seemingly random (sometimes right after I clicked the mouse, sometimes not; sometimes with Pandora/flash being used, sometimes not, etc). I assume they're kernel panics since it completely locks up, but the laptop doesn't have a capslock or scroll lock LED. It is on a dock and I do have a USB keyboard, but the scroll lock/capslock lights do not flash when it happens (not sure if this is indicating its not a kernel panic, or if the kernel panic just wouldn't illuminate the LEDs on a usb keyboard attached to a laptop dock). This was annoying but not terrible. However, I've found a way to reproduce it. I have a particular CSV file that when I open up in LibreOffice Calc and scroll around, the same thing happens- complete lock up. I really need to use this file, so I'd like to fix the issue, but at the least it's given me a test case to work with. So, having a case where I can cause this issue, what can I do to better find out what's going on? I've looked in /var/log/syslog but haven't found anything seemingly useful. Any thoughts?

    Read the article

  • access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

    - by Joel Alenchery
    Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely Accessing IP restricted server from dynamic IP which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was Static IP for dynamic IP the first answer seems exactly what I need but I dont know how I would go about doing the same on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

    Read the article

  • access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

    - by Joel Alenchery
    Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely http://serverfault.com/questions/187231/accessing-ip-restricted-server-from-dynamic-ip which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was http://serverfault.com/questions/136806/static-ip-for-dynamic-ip the first answer seems exactly what I need but I dont know how I would go about on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

    Read the article

  • Windows 7 Black Screen On Boot, Seperate Bootable VHD Works Fine

    - by David Osborn
    I have a Window 7 x64 install with a bootable VHD (also Windows 7 x64). I was having problems getting my homeserver to do backups (VSS erred) so I ran check disk and used a tool from MS (cleanc2r.exe) to remove an empty Q drive from the VHD that I believe was a result of installing Office 2010 Beta. (All of this was done on the bootable VHD, not the main install.) Now I can't boot into the main install. It gets past the Starting Windows screen and then goes black. I can still boot into the bootable VHD and everything works fine from there. I have tried to boot the main install in Safe Mode/Safe Mode with Networking/and Safe Mode command prompt and it has the same issue. I ran chkdsk /r on the main install and after doing all the work there was a message about correcting some free space that was marked as allocated and also that it was unable to make an entry into the event log. I tried the startup repair utility and it found no problems. I don't see the setting for restore to last know good configuration so I couldn't do that. I don't recall installing anything new to the main install nor having hooked up any new hardware recently.

    Read the article

  • XP CD doesn't offer repair option

    - by SLaks
    I'm fixing an IBM Thinkpad laptop running XP Pro which doesn't boot all the way (It gets past the XP logo boot screen, a movable mouse cursor appears, and it doesn't get any further, even in safe mode) after being bumped a bit. I'd like to do a repair install. I booted it to an XP Pro CD, but the Repair install option (not recovery console) doesn't appear. After pressing F8 to accept the EULA, it says, Loading setupp.ini, then immediately goes to a partition list (it never says Searching for previous installations of Microsoft Windows). If I select the partition, it warns me that there is already a Windows installation in that partition, and that it will be completely obliterated if I continue. (So I know that it does see the contents of the hard disk) I booted the same CD in an XP virtual machine, and it offered to repair the XP installtion in the virtual machine, so the problem isn't with the CD. Does anyone know how make it do a repair install (or have any other ideas to solve the problem?) It might not show up because it's an OEM installation (but not an OEM CD), but that's just a guess.

    Read the article

  • win8: access denied to external USB disk; update access rights fails

    - by Gerard
    I use to work with 2 laptops (vista and win7), my work being files on an external usb disk. My oldest laptop broke down, so I bought a new one. I had no option other than take win8. 1/ I suspect something changed with access rights, as my external disk suffered some "access denied" problem on win8. I was prompted (by win8) somehow to fix the access rights, which I tried to do, getting to the properties - security. This process was very slow and ended up saying "disk is not ready". Additonnally, the usb somehow was not recognized anymore. 2/ Back to win7, I was warned that my disk needed to be verified, which I did. In this process, some files were lost (most of them i could recover from the folder found00x, but I have some backup anyway). Also, I don't know why, but under win7, all the folder showed with a lock. 3/ Then back again to win8. Same problem : access denied to my disk + no way to change access rights as it gets stuck "disk is not ready". Now I am pretty sure there is some kind of bug or inconsistence in win8 / win7. I did 2/ and 3/ a few times. At some point, I also got an access denied in win7. I could restore access rigths to the disk to "system" (properties - security - EDIT for full control to group "system" ...). But then I still get the same access right pb on win8, and getting stuck in the process to restore full control to "system" -- and "admin" groups. Now, after I tried for more than 3 days, I am losing my patience with that bloody win8 which I did not want to buy but had no choice. I upgraded win8 with the windows updates available. Does not help. Anybody can help me ?

    Read the article

  • A complicated nginx/php-fpm chroot setup

    - by Rsaesha
    I'm running nginx and php-fpm, and I want to set up jails for each host. My setup is a little complicated, so following tutorials on the web gets me nowhere. Each site has a directory /var/www/domain.name/ Inside that directory, there will be a public/ directory which will be the website root, a logs/ directory which will store nginx logs for that site specifically, and the chroot filesystem (etc/, usr/, etc.) The first problem I've run into is that nomatter how I configure it, PHP-FPM cannot find the files that are passed to it via nginx. They result in a "Primary script unknown" error, and to make matters worse, the error messages from PHP-FPM are no more verbose than that, so I can't figure out what path is being passed by nginx. A php-fpm pool configuration for a host looks like this: [host] user = host group = www-data chroot = /var/www/domain.name chdir = /public listen = 127.0.0.1:900x 'x' is incremented for each pool. The nginx config for this host looks like this: server { listen 80; server_name domain.name *.domain.name; root /var/www/domain.name/public; index index.php index.html index.html; location ~ \.php$ { expires epoch; fastcgi_split_path_info ^(.+\.php)(/.+)$; include fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_pass 127.0.0.1:9001; } } I'm guessing that the problem is the SCRIPT_FILENAME parameter, but I've changed it to just $fastcgi_script_name, and various other combinations, but to no avail. Can anyone help?

    Read the article

  • Splitting Servers into Two Groups

    - by Matt Hanson
    At our organization, we're looking at implementing some sort of informal internal policy for server maintenance. What we're looking at doing is completing maintenance on our entire server pool every two months; each month we'll do half of the servers. What I'm trying to figure out is some way to split the servers into the two groups. Our naming convention isn't much to be desired (but getting better) so by name or number doesn't really work. I can easily take a list of all the servers and split them in two, but with new servers are being added constantly, and old ones retired, that list would be a headache to maintain. I'd like to look at any given server and know if it should have its maintenance done this month or next. For example, it would be nice to look at the serial number. If it started with an even number, then it gets maintenance done on even months and vice-versa. This example won't work though as a little over half of the servers are virtual. Any ideas?

    Read the article

  • how to run multiple shell scripts in parallel

    - by tom smith
    I've got a few test scripts, each of which runs a test php app. Each script runs forever. So, cat.sh, dog.sh, and foo.sh, each run a php script, and each shell script runs the php app in a loop, so it runs forever, sleeping after each run. I'm trying to figure out how to run the scripts in parallel, and at the same time, see the output of the php apps in the stdout/term window. I thought, simply doing something like foo.sh > &2 dog.sh > &2 cat.sh > &2 in a shell script would be sufficient, but it's not working. foo.sh, runs foo.php once, and it runs correctly dog.sh, runs dog.php in a never ending loop. it runs as expected cat.sh, runs cat.php in a never ending loop *** this never runs!!! it appears that the shell script never gets to run cat.sh. if i run cat.sh by itself in a separate window/term, it runs as expected... thoughts/comments

    Read the article

  • What is the most likely cause to a Blue Screen of Death when the user presses Ctrl-Alt-Delete?

    - by Jay
    My wife is experiencing this with her work laptop--she presses Ctrl-Alt-Delete to lock and she gets the BSOD. The first troubleshooting step is usually to "re-image", and it's locked down. So with this question, I am asking whether the behavior is unique enough that someone in the stack-universe knows exactly what this is (something I can tell her to tell her help desk support). Update: help desk said to order more RAM. Alt-tabbing caused the same behavior today. And...she learned that multiple users are affected. I'm not sure I'll be able to clean any additional info that will help w/ troubleshooting. I'll leave the question here for a bit and if an answer ends up being the actual solution, I'll accept it. If not, I think I should probably remove the question (i'll check meta). Update #2.5: The cause appears to be a ctrl-alt-delete keystroke while Sales Team Configurator is open. This can either be to lock the screen (there are workaround in answers already present) or to unlock the screen (no workaround for that).

    Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >