Search Results

Search found 13494 results on 540 pages for 'board game'.

Page 306/540 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

  • Making AI jump on a spot effectively

    - by Pasquale Sada
    How to calculate, in 3D environment, the closest point, from which an AI character can jump onto a platform? Setup I have an initial velocity V(Vx,Vy,VZ) and a spot where the character stands still at S(Sx,Sy,Sz). What I'm trying to achieve is a successful jump on a spot E(Ex,Ey,Ez) where you have clicked on(only lower or higher spot, because I've in place a simple steering behavior for even terrains). There are no obstacles around. I've implemented a formula that can make him jump in a precise way on a spot but you need to declare an angle: the problem arise when the selected spot is straight above your head. It' pretty lame that the char hang there and can reach a thing that is 1cm above is head. I'll share the code I'm using: Vector3 dir = target - transform.position; // get target direction float h = dir.y; // get height difference dir.y = 0; // retain only the horizontal direction float dist = dir.magnitude ; // get horizontal distance float a = angle * Mathf.Deg2Rad; // convert angle to radians dir.y = dist * Mathf.Tan(a); // set dir to the elevation angle dist += h / Mathf.Tan(a); // correct for small height differences // calculate the velocity magnitude float vel = Mathf.Sqrt(dist * Physics.gravity.magnitude / Mathf.Sin(2 *a)); return vel * dir.normalized; Ended up using the lowest angle (20 degree) and checking for collision on the trajectory. If found any increase the angle. Here some code (to improve the code maybe must stop the check at the highest point of the curve): Vector3 BallisticVel(Vector3 target, float angle) { Vector3 dir = target - transform.position; // get target direction float h = dir.y; // get height difference dir.y = 0; // retain only the horizontal direction float dist = dir.magnitude ; // get horizontal distance float a = angle * Mathf.Deg2Rad; // convert angle to radians dir.y = dist * Mathf.Tan(a); // set dir to the elevation angle dist += h / Mathf.Tan(a); // correct for small height differences // calculate the velocity magnitude float vel = Mathf.Sqrt(dist * Physics.gravity.magnitude / Mathf.Sin(2 * a)); return vel * dir.normalized; } Vector3 TrajectoryPoint(Vector3 startingPosition, Vector3 startingVelocity, float n ) { float t = 1/60 ; // seconds per time step Vector3 stepVelocity = t * startingVelocity; // m/s Vector3 stepGravity = t * t * Physics.gravity; // m/s/s return startingPosition + n * stepVelocity + 0.5f * (n*n+n) * stepGravity; } bool CheckTrajectory(Vector3 startingPosition,Vector3 target, float angle_jump) { Debug.Log("checking"); if(angle_jump < 80f) { Debug.Log("if"); Vector3 startingVelocity = BallisticVel(target, angle_jump); for (int i = 0; i < 180; i++) { //Debug.Log(i); Vector3 trajectoryPosition = TrajectoryPoint( startingPosition, startingVelocity, i ); if(Physics.Raycast(trajectoryPosition,Vector3.forward,safeDistance)) { angle_jump += 10; break; // restart loop with the new angle } else continue; } return true; JumpVelocity = BallisticVel(target, angle_jump); } return false; }

    Read the article

  • How to implement an intelligent enemy in a shoot-em-up?

    - by bummzack
    Imagine a very simple shoot-em-up, something we all know: You're the player (green). Your movement is restricted to the X axis. Our enemy (or enemies) is at the top of the screen, his movement is also restricted to the X axis. The player fires bullets (yellow) at the enemy. I'd like to implement an A.I. for the enemy that should be really good at avoiding the players bullets. My first idea was to divide the screen into discrete sections and assign weights to them: There are two weights: The "bullet-weight" (grey) is the danger imposed by a bullet. The closer the bullet is to the enemy, the higher the "bullet-weight" (0..1, where 1 is highest danger). Lanes without a bullet have a weight of 0. The second weight is the "distance-weight" (lime-green). For every lane I add 0.2 movement cost (this value is kinda arbitrary now and could be tweaked). Then I simply add the weights (white) and go to the lane with the lowest weight (red). But this approach has an obvious flaw, because it can easily miss local minima as the optimal place to go would be simply between two incoming bullets (as denoted with the white arrow). So here's what I'm looking for: Should find a way through bullet-storm, even when there's no place that doesn't impose a threat of a bullet. Enemy can reliably dodge bullets by picking an optimal (or almost optimal) solution. Algorithm should be able to factor in bullet movement speed (as they might move with different velocities). Ways to tweak the algorithm so that different levels of difficulty can be applied (dumb to super-intelligent enemies). Algorithm should allow different goals, as the enemy doesn't only want to evade bullets, he should also be able to shoot the player. That means that positions where the enemy can fire at the player should be preferred when dodging bullets. So how would you tackle this? Contrary to other games of this genre, I'd like to have only a few, but very "skilled" enemies instead of masses of dumb enemies.

    Read the article

  • Move the location of the XYZ pivot point on a mesh in UDK

    - by WebDevHobo
    When working with any mesh, you get an XYZ point somewhere on it. If you just want to move the mesh in any direction, it doesn't matter where this point is located. However, I want to rotate a door. This requires the point of rotation to be very specific. I can't find anywhere how to change the location of the point. Can anyone help? EDIT: solved, to change the pivot point, right click on the mesh, go to "Pivot" and move it. Then right click again and this time select "Save PrePivot to Pivot"

    Read the article

  • glsl demo suggestions ?

    - by brainydexter
    In a lot of places I interviewed recently, I have been asked many a times if I have worked with shaders. Even though, I have read and understand the pipeline, the answer to that question has been no. Recently, one of the places asked me if I can send them a sample of 'something' that is "visually polished". So, I decided to take the plunge and wrote some simple shader in GLSL(with opengl).I now have a basic setup where I can use vbos with glsl shaders. I have a very short window left to send something to them and I was wondering if someone with experience, could suggest an idea that is interesting enough to grab someone's attention. Thanks

    Read the article

  • Moving while doing loop animation in RPGMaker

    - by AzDesign
    I made a custom class to display character portrait in RPGMaker XP Here is the class : class Poser attr_accessor :images def initialize @images = Sprite.new @images.bitmap = RPG::Cache.picture('Character.png') #100x300 @images.x = 540 #place it on the bottom right corner of the screen @images.y = 180 end end Create an event on the map to create an instance as global variable, tada! image popped out. Ok nice. But Im not satisfied, Now I want it to have bobbing-head animation-like (just like when we breathe, sometimes bob our head up and down) so I added another method : def move(x,y) @images.x += x @images.y += y end def animate(x,y,step,delay) forward = true 2.times { step.times { wait(delay) if forward move(x/step,y/step) else move(-x/step,-y/step) end } wait(delay*3) forward = false } end def wait(time) while time > 0 time -= 1 Graphics.update end end I called the method to run the animation and it works, so far so good, but the problem is, WHILE the portrait goes up and down, I cannot move my character until the animation is finished. So that's it, I'm stuck in the loop block, what I want is to watch the portrait moving up and down while I walk around village, talk to npc, etc. Anyone can solve my problem ? Or better solution ? Thanks in advance

    Read the article

  • Check if an object is facing another based on angles

    - by Isaiah
    I already have something that calculates the bearing angle to get one object to face another. You give it the positions and it returns the angle to get one to face the other. Now I need to figure out how tell if on object is facing toward another object within a specified field and I can't find any information about how to do this. The objects are obj1 and obj2. Their angles are at obj1.angle and obj2.angle. Their vectors are at obj1.pos and obj2.pos. It's in the format [x,y]. The angle to have one face directly at another is found with direction(obj1.pos,obj2.pos). I want to set the function up like this: isfacing(obj1,obj2,area){...} and return true/false depending if it's in the specified field area to the angle to directly see it. I've got a base like this: var isfacing = function (obj1,obj2,area){ var toface = direction(obj1.pos,obj2.pos); if(toface+area >= obj1.angle && ob1.angle >= toface-area){ return true; } return false; } But my problem is that the angles are in 360 degrees, never above 360 and never below 0. How can I account for that in this? If the first object's angle is say at 0 and say I subtract a field area of 20 or so. It'll check if it's less than -20! If I fix the -20 it becomes 340 but x < 340 isn't what I want, I'd have to x 340 in that case. Is there someone out there with more sleep than I that can help a new dev pulling an all-nighter just to get enemies to know if they're attacking in the right direction? I hope I'm making this harder than it seems. I'd just make them always face the main char if the producer didn't want attacks from behind to work while blocking. In which case I'll need the function above anyways. I've tried to give as much info as I can think would help. Also this is in 2d.

    Read the article

  • Change collision action

    - by PatrickR
    I have a collision detection and its working fine, the problem is, that whenever my "bird" is hitting a "cloud", the cloud dissapers and i get some points. The same happens for the "sol" which it should, but not with the clouds. How can this be changed ? ive tryed a lot, but can seem to figger it out. Collision Code - (void)update:(ccTime)dt { bird.position = ccpAdd(bird.position, skyVelocity); NSMutableArray *projectilesToDelete = [[NSMutableArray alloc] init]; for (CCSprite *bird in _projectiles) { bird.anchorPoint = ccp(0, 0); CGRect absoluteBox = CGRectMake(bird.position.x, bird.position.y, [bird boundingBox].size.width, [bird boundingBox].size.height); NSMutableArray *targetsToDelete = [[NSMutableArray alloc] init]; for (CCSprite *cloudSprite in _targets) { cloudSprite.anchorPoint = ccp(0, 0); CGRect absoluteBox = CGRectMake(cloudSprite.position.x, cloudSprite.position.y, [cloudSprite boundingBox].size.width, [cloudSprite boundingBox].size.height); if (CGRectIntersectsRect([bird boundingBox], [cloudSprite boundingBox])) { [targetsToDelete addObject:cloudSprite]; } } for (CCSprite *solSprite in _targets) { solSprite.anchorPoint = ccp(0, 0); CGRect absoluteBox = CGRectMake(solSprite.position.x, solSprite.position.y, [solSprite boundingBox].size.width, [solSprite boundingBox].size.height); if (CGRectIntersectsRect([bird boundingBox], [solSprite boundingBox])) { [targetsToDelete addObject:solSprite]; score += 50/2; [scoreLabel setString:[NSString stringWithFormat:@"%d", score]]; } } // NÅR SKYEN BLIVER RAMT AF FUGLEN for (CCSprite *cloudSprite in targetsToDelete) { //[_targets removeObject:cloudSprite]; //[self removeChild:cloudSprite cleanup:YES]; } // NÅR SOLEN BLIVER RAMT AF FUGLEN for (CCSprite *solSprite in targetsToDelete) { [_targets removeObject:solSprite]; [self removeChild:solSprite cleanup:YES]; } if (targetsToDelete.count > 0) { [projectilesToDelete addObject:bird]; } [targetsToDelete release]; } // NÅR FUGLEN BLIVER RAMT AF ALT ANDET for (CCSprite *bird in projectilesToDelete) { //[_projectiles removeObject:bird]; //[self removeChild:bird cleanup:YES]; } [projectilesToDelete release]; }

    Read the article

  • OpenGL error LNK2019

    - by Ghilliedrone
    I'm trying to compile a basic OpenGL program. I linked opengl32.lib and glu32.lib but I'm getting errors. The errors I get are: error LNK1120: 7 unresolved externals error LNK2019: unresolved external symbol _main referenced in function ___tmainCRTStartup error LNK2019: unresolved external symbol "public: float __thiscall GLWindow::getElapsedSeconds(void)" (?getElapsedSeconds@GLWindow@@QAEMXZ) referenced in function _WinMain@16 error LNK2019: unresolved external symbol "public: bool __thiscall GLWindow::isRunning(void)" (?isRunning@GLWindow@@QAE_NXZ) referenced in function _WinMain@16 error LNK2019: unresolved external symbol "public: void __thiscall GLWindow::attachExample(class Example *)" (?attachExample@GLWindow@@QAEXPAVExample@@@Z) referenced in function _WinMain@16 error LNK2019: unresolved external symbol "public: void __thiscall GLWindow::destroy(void)" (?destroy@GLWindow@@QAEXXZ) referenced in function _WinMain@16 error LNK2019: unresolved external symbol "public: __thiscall GLWindow::GLWindow(struct HINSTANCE__ *)" (??0GLWindow@@QAE@PAUHINSTANCE__@@@Z) referenced in function _WinMain@16 error LNK2019: unresolved external symbol "private: void __thiscall GLWindow::setupPixelFormat(void)" (?setupPixelFormat@GLWindow@@AAEXXZ) referenced in function "public: long __stdcall GLWindow::WndProc(struct HWND__ *,unsigned int,unsigned int,long)" (?WndProc@GLWindow@@QAGJPAUHWND__@@IIJ@Z)

    Read the article

  • Does anybody know of any resources to achieve this particular "2.5D" isometric engine effect?

    - by Craig Whitley
    I understand this is a little vague, but I was hoping somebody might be able to describe a high-level workflow or link to a resource to be able to achieve a specific isometric "2.5D" tile engine effect. I fell in love with http://www.youtube.com/watch?v=-Q6ISVaM5Ww this engine. Especially with the lighting and the shaders! He has a brief description of how he achieved what he did, but I could really use a brief flow of where you would start, what you would read up on and learn and the logical order to implement these things. A few specific questions: 1) Is there a heightmap on the ground texture that lets the light reflect brighter on certain parts of it? 2) "..using a special material which calculates the world-space normal vectors of every pixel.." - is this some "magic" special material he has created himself, or can you hazard a guess at what he means? 3) with relation to the above quote - what does he mean by 'world-space normal vectors of every pixel'? 4) I'm guessing I'm being a little bit optimistic when I ask if there's any 'all-in-one' tutorial out there? :)

    Read the article

  • GLSL: Strange light reflections

    - by Tom
    According to this tutorial I'm trying to make a normal mapping using GLSL, but something is wrong and I can't find the solution. The output render is in this image: Image1 in this image is a plane with two triangles and each of it is different illuminated (that is bad). The plane has 6 vertices. In the upper left side of this plane are 2 identical vertices (same in the lower right). Here are some vectors same for each vertice: normal vector = 0, 1, 0 (red lines on image) tangent vector = 0, 0,-1 (green lines on image) bitangent vector = -1, 0, 0 (blue lines on image) here I have one question: The two identical vertices does need to have the same tangent and bitangent? I have tried to make other values to the tangents but the effect was still similar. Here are my shaders Vertex shader: #version 130 // Input vertex data, different for all executions of this shader. in vec3 vertexPosition_modelspace; in vec2 vertexUV; in vec3 vertexNormal_modelspace; in vec3 vertexTangent_modelspace; in vec3 vertexBitangent_modelspace; // Output data ; will be interpolated for each fragment. out vec2 UV; out vec3 Position_worldspace; out vec3 EyeDirection_cameraspace; out vec3 LightDirection_cameraspace; out vec3 LightDirection_tangentspace; out vec3 EyeDirection_tangentspace; // Values that stay constant for the whole mesh. uniform mat4 MVP; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Output position of the vertex, in clip space : MVP * position gl_Position = MVP * vec4(vertexPosition_modelspace,1); // Position of the vertex, in worldspace : M * position Position_worldspace = (M * vec4(vertexPosition_modelspace,1)).xyz; // Vector that goes from the vertex to the camera, in camera space. // In camera space, the camera is at the origin (0,0,0). vec3 vertexPosition_cameraspace = ( V * M * vec4(vertexPosition_modelspace,1)).xyz; EyeDirection_cameraspace = vec3(0,0,0) - vertexPosition_cameraspace; // Vector that goes from the vertex to the light, in camera space. M is ommited because it's identity. vec3 LightPosition_cameraspace = ( V * vec4(LightPosition_worldspace,1)).xyz; LightDirection_cameraspace = LightPosition_cameraspace + EyeDirection_cameraspace; // UV of the vertex. No special space for this one. UV = vertexUV; // model to camera = ModelView vec3 vertexTangent_cameraspace = MV3x3 * vertexTangent_modelspace; vec3 vertexBitangent_cameraspace = MV3x3 * vertexBitangent_modelspace; vec3 vertexNormal_cameraspace = MV3x3 * vertexNormal_modelspace; mat3 TBN = transpose(mat3( vertexTangent_cameraspace, vertexBitangent_cameraspace, vertexNormal_cameraspace )); // You can use dot products instead of building this matrix and transposing it. See References for details. LightDirection_tangentspace = TBN * LightDirection_cameraspace; EyeDirection_tangentspace = TBN * EyeDirection_cameraspace; } Fragment shader: #version 130 // Interpolated values from the vertex shaders in vec2 UV; in vec3 Position_worldspace; in vec3 EyeDirection_cameraspace; in vec3 LightDirection_cameraspace; in vec3 LightDirection_tangentspace; in vec3 EyeDirection_tangentspace; // Ouput data out vec3 color; // Values that stay constant for the whole mesh. uniform sampler2D DiffuseTextureSampler; uniform sampler2D NormalTextureSampler; uniform sampler2D SpecularTextureSampler; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Light emission properties // You probably want to put them as uniforms vec3 LightColor = vec3(1,1,1); float LightPower = 40.0; // Material properties vec3 MaterialDiffuseColor = texture2D( DiffuseTextureSampler, vec2(UV.x,-UV.y) ).rgb; vec3 MaterialAmbientColor = vec3(0.1,0.1,0.1) * MaterialDiffuseColor; //vec3 MaterialSpecularColor = texture2D( SpecularTextureSampler, UV ).rgb * 0.3; vec3 MaterialSpecularColor = vec3(0.5,0.5,0.5); // Local normal, in tangent space. V tex coordinate is inverted because normal map is in TGA (not in DDS) for better quality vec3 TextureNormal_tangentspace = normalize(texture2D( NormalTextureSampler, vec2(UV.x,-UV.y) ).rgb*2.0 - 1.0); // Distance to the light float distance = length( LightPosition_worldspace - Position_worldspace ); // Normal of the computed fragment, in camera space vec3 n = TextureNormal_tangentspace; // Direction of the light (from the fragment to the light) vec3 l = normalize(LightDirection_tangentspace); // Cosine of the angle between the normal and the light direction, // clamped above 0 // - light is at the vertical of the triangle -> 1 // - light is perpendicular to the triangle -> 0 // - light is behind the triangle -> 0 float cosTheta = clamp( dot( n,l ), 0,1 ); // Eye vector (towards the camera) vec3 E = normalize(EyeDirection_tangentspace); // Direction in which the triangle reflects the light vec3 R = reflect(-l,n); // Cosine of the angle between the Eye vector and the Reflect vector, // clamped to 0 // - Looking into the reflection -> 1 // - Looking elsewhere -> < 1 float cosAlpha = clamp( dot( E,R ), 0,1 ); color = // Ambient : simulates indirect lighting MaterialAmbientColor + // Diffuse : "color" of the object MaterialDiffuseColor * LightColor * LightPower * cosTheta / (distance*distance) + // Specular : reflective highlight, like a mirror MaterialSpecularColor * LightColor * LightPower * pow(cosAlpha,5) / (distance*distance); //color.xyz = E; //color.xyz = LightDirection_tangentspace; //color.xyz = EyeDirection_tangentspace; } I have replaced the original color value by EyeDirection_tangentspace vector and then I got other strange effect but I can not link the image (not eunogh reputation) Is it possible that with this shaders is something wrong, or maybe in other place in my code e.g with my matrices? SOLVED Solved... 3 days needed for changing one letter from this: glBindBuffer(GL_ARRAY_BUFFER, vbo); glVertexAttribPointer ( 4, // attribute 3, // size GL_FLOAT, // type GL_FALSE, // normalized? sizeof(VboVertex), // stride (void*)(12*sizeof(float)) // array buffer offset ); to this: glBindBuffer(GL_ARRAY_BUFFER, vbo); glVertexAttribPointer ( 4, // attribute 3, // size GL_FLOAT, // type GL_FALSE, // normalized? sizeof(VboVertex), // stride (void*)(11*sizeof(float)) // array buffer offset ); see difference? :)

    Read the article

  • How to optimise mesh data

    - by Wardy
    So i have some procedurally generated mesh data and i want to reduce it down to its minimum number of verts. In case it matters this is a unity project. Working on the basis of a simple example, lets assume a typical flat surface of points 2 by 3. The point / vertex at [1,1] is used in many triangles. I've generated mesh for a voxel type engine that adds verts to a list based on face visiblility and now I want to remove all the duplicates. Can anyone come up with an efficient way of doing this because what i have is sooo bad its not even funny (and i don't even think it's logically correct) ... private void Optimize() { Vector3 v; Vector3 v2; for (int i = 0; i < Vertices.Count; i++) { v = Vertices[i]; for (int j = i+1; j < Vertices.Count; j++) { v2 = Vertices[j]; if (v.x == v2.x && v.y == v2.y && v.z == v2.z) { for (int ind = 0; ind < Indices.Count; ind++) { if (Indices[ind] == j) { Indices[ind] = i; } else if (Indices[ind] > j && Indices[ind] > 0) Indices[ind]--; } Vertices.RemoveAt(j); Uvs.RemoveAt(j); Normals.RemoveAt(j); } } } } EDIT: Ok i managed to get this (code sample above updated) to render an "optimised" set of verts but the UV data is all wrong now, which would make sense because i'm basically just removing any UV Vector that represents a UV coord for a removed vert and not actually considering what I need to do to "fix the tri" so to speak. The code now seemingly does work but its quite time consuming, still looking to further optimise.

    Read the article

  • Triangulating a partially triangulated mesh (2D)

    - by teodron
    Referring to the above exhibits, this is the scenario I am working with: starting with a planar graph (in my case, a 2D mesh) with a given triangulation, based on a certain criterion, the graph nodes are labeled as RED and BLACK. (A) a subgraph containing all the RED nodes (with edges between only the directly connected neighbours) is formed (note: although this figure shows a tree forming, it may well happen that the subgraph contain loops) (B) Problem: I need to quickly build a triangulation around the subgraph (e.g. as shown in figure C), but under the constraint that I have to keep the already present edges in the final result. Question: Is there a fast way of achieving this given a partially triangulated mesh? Ideally, the complexity should be in the O(n) class. Some side-remarks: it would be nice for the triangulation algorithm to take into account a certain vertex priority when adding edges (e.g. it should always try to build a "1-ring" structure around the most important nodes first - I can implement iteratively such a routine, but it's O(n^2) ). it would also be nice to reflect somehow the "hop distance" when adding edges: add edges first between the nodes that were "closer" to each other given the start topology. Nevertheless, disregarding the remarks, is there an already known scenario similar to this one where a triangulation is built upon a partially given set of triangles/edges?

    Read the article

  • Why the clip space in OpenGL has 4 dimensions?

    - by user827992
    I will use this as a generic reference, but the more i browser online docs and books, the less i understand about this. const float vertexPositions[] = { 0.75f, 0.75f, 0.0f, 1.0f, 0.75f, -0.75f, 0.0f, 1.0f, -0.75f, -0.75f, 0.0f, 1.0f, }; in this online book there is an example about how to draw the first and classic hello world for OpenGL about making a triangle. The vertex structure for the triangle is declared as stated in the code above. The book, as all the other sources about this, stress the point that the Clip Space is a 4D structure that is used to basically decide what will be rasterized and rendered to the screen. Here I have my questions: i can't imagine something in 4D, i don't think that a human can do that, what is a 4D for this Clip space ? the most human-readable doc that i have read speaks about a camera, which is just an abstraction over the clipping concept, and i get that, the problem is, why not using the concept of a camera in the first place which is a more familiar 3D structure? The only problem with the concept of a camera is that you need to define the prospective in other way and so you basically have to add another statement about what kind of camera you wish to have. How i'm supposed to read this 0.75f, 0.75f, 0.0f, 1.0f ? All i get is that they are all float values and i get the meaning of the first 3 values, what does it mean the last one?

    Read the article

  • Build a view frustum from angles

    - by MulletDevil
    I have 4 angles, left, right, top & bottom. These angles are in degrees. They define the angle between the forward vector and the corresponding side. I am trying to use these to calculate the required values for Perseective Off Centre function found here http://docs.unity3d.com/Documentation/ScriptReference/Camera-projectionMatrix.html I tried doing (near plane-far plane) * Tan(angle) But that didn't give the correct results.

    Read the article

  • Position Reconstruction from Depth by inverting Perspective Projection

    - by user1294203
    I had some trouble reconstructing position from depth sampled from the depth buffer. I use the equivalent of gluPerspective in GLM. The code in GLM is: template GLM_FUNC_QUALIFIER detail::tmat4x4 perspective ( valType const & fovy, valType const & aspect, valType const & zNear, valType const & zFar ) { valType range = tan(radians(fovy / valType(2))) * zNear; valType left = -range * aspect; valType right = range * aspect; valType bottom = -range; valType top = range; detail::tmat4x4 Result(valType(0)); Result[0][0] = (valType(2) * zNear) / (right - left); Result[1][2] = (valType(2) * zNear) / (top - bottom); Result[2][3] = - (zFar + zNear) / (zFar - zNear); Result[2][4] = - valType(1); Result[3][5] = - (valType(2) * zFar * zNear) / (zFar - zNear); return Result; } There doesn't seem to be any errors in the code. So I tried to invert the projection, the formula for the z and w coordinates after projection are: and dividing z' with w' gives the post-projective depth (which lies in the depth buffer), so I need to solve for z, which finally gives: Now, the problem is I don't get the correct position (I have compared the one reconstructed with a rendered position). I then tried using the respective formula I get by doing the same for this Matrix. The corresponding formula is: For some reason, using the above formula gives me the correct position. I really don't understand why this is the case. Have I done something wrong? Could someone enlighten me please?

    Read the article

  • Rotation and translation like in GTA 1 OpenGL

    - by user1876377
    Okay, so I have a figure in XZ plain. I want to move it forward/backward and rotate at it's own Y axis, then move forward again in the rotation's direction, like the character in GTA 1. Code so far: Init: spaceship_position = glm::vec3(0,0,0); spaceship_rotation = glm::vec3(0,0,0); spaceship_scale = glm::vec3(1, 1, 1); Draw: glm::mat4 transform = glm::scale<float>(spaceship_scale) * glm::rotate<float>(spaceship_rotation.x, 1, 0, 0) * glm::rotate<float>(spaceship_rotation.y, 0, 1, 0) * glm::rotate<float>(spaceship_rotation.z, 0, 0, 1) * glm::translate<float>(spaceship_position); drawMesh(spaceship, texture, transform); Update: switch (key.keysym.sym) { case SDLK_UP: spaceship_position.z += 0.1; break; case SDLK_DOWN: spaceship_position.z -= 0.1; break; case SDLK_LEFT: spaceship_rotation.y += 1; break; case SDLK_RIGHT: spaceship_rotation.y -= 1; break; } So this only moves on the Z axis, but how can I move the object on both Z and X axis where the object is facing?

    Read the article

  • Sorting objects before rendering

    - by dreta
    I'm trying to implement a scene graph and in all the articles i've come across there is talk about object sorting. So you'd sort your objects by "material" for example. Now untill i sat down and started implementing it, i kind of took this for granted, because it made sense. But now i'm wondering what does sorting actually change? In my engine, i have a manager for UBOs, i use those to store data that'll be shared between programs, at the moment that only involves time, camera and projection matrices and lights (i'm not worrying about managing which lights affect which objects ATM). Now for each model i have to change the model to world matrix uniform, no sorting is going to change that. So is the jump from changing this matrix to also setting a material for each object that bad? I vaguely remember reading somewhere that each time you change something in the pipeline, it has to get flushed and that can cause performance issues. But for each drawing call i'm setting up a model to world matrix anyway, so what sense does it make to ever be concerned about this? BTW is there any information about whether changing a uniform and calling glBufferSubData is more (or less) expensive.

    Read the article

  • Calculate the intersection depth between a rectangle and a right triangle

    - by Celarix
    all. I'm working on a 2D platformer built in C#/XNA, and I'm having a lot of problems calculating the intersection depth between a standard rectangle (used for sprites) and a right triangle (used for sloping tiles). Ideally, the rectangle will collide with the solid edges of the triangle, and its bottom-center point will collide with the sloped edge. I've been fighting with this for a couple of days now, and I can't make sense of it. So far, the method detects intersections (somewhat), but it reports wildly wrong depths. How does one properly calculate the depth? Is there something I'm missing? Thanks!

    Read the article

  • Projecting onto different size screens by cropping

    - by Jason
    Hi, I am building a phone application which will display a shape on screen. The shape should look the same on different screen sizes. I. Decided the best way to do this is to show more of the background on larger screen keeping the shapes proportion the same on all screens. My problem is I am not sure how to achieve this, I can query the screen size at runtime and calculate how different it is from the six is designed for but I am not sure what to do with this value. What kind of projection should I use for my orthographic matrix an hour will I display more on larger screens and not loose information on smaller screens? Thanks, Jason.

    Read the article

  • Parenting Opengl with Groups in LibGDX

    - by Rudy_TM
    I am trying to make an object child of a Group, but this object has a draw method that calls opengl to draw in the screen. Its class its this public class OpenGLSquare extends Actor { private static final ImmediateModeRenderer renderer = new ImmediateModeRenderer10(); private static Matrix4 matrix = null; private static Vector2 temp = new Vector2(); public static void setMatrix4(Matrix4 mat) { matrix = mat; } @Override public void draw(SpriteBatch batch, float arg1) { // TODO Auto-generated method stub renderer.begin(matrix, GL10.GL_TRIANGLES); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y0, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y0, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y0, 0f); renderer.end(); } } In my screen class I have this, i call it in the constructor MyGroupClass spriteLab = new MyGroupClass(spriteSheetLab); OpenGLSquare square = new OpenGLSquare(); square.setX0(100); square.setY0(200); square.setX1(400); square.setY1(280); square.color.set(Color.BLUE); square.setSize(); //spriteLab.addActorAt(0, clock); spriteLab.addActor(square); stage.addActor(spriteLab); And the render in the screen I have @Override public void render(float arg0) { this.gl.glClear(GL10.GL_COLOR_BUFFER_BIT |GL10.GL_DEPTH_BUFFER_BIT); stage.draw(); stage.act(Gdx.graphics.getDeltaTime()); } The problem its that when i use opengl with parent, it resets all the other chldren to position 0,0 and the opengl renderer paints the square in the exact position of the screen and not relative to the parent. I tried using batch.enableBlending() and batch.disableBlending() that fixes the position problem of the other children, but not the relative position of the opengl drawing and it also puts alpha to the glDrawing. What am i doing wrong?:/

    Read the article

  • Help understand GLSL directional light on iOS (left handed coord system)

    - by Robse
    I now have changed from GLKBaseEffect to a own shader implementation. I have a shader management, which compiles and applies a shader to the right time and does some shader setup like lights. Please have a look at my vertex shader code. Now, light direction should be provided in eye space, but I think there is something I don't get right. After I setup my view with camera I save a lightMatrix to transform the light from global space to eye space. My modelview and projection setup: - (void)setupViewWithWidth:(int)width height:(int)height camera:(N3DCamera *)aCamera { aCamera.aspect = (float)width / (float)height; float aspect = aCamera.aspect; float far = aCamera.far; float near = aCamera.near; float vFOV = aCamera.fieldOfView; float top = near * tanf(M_PI * vFOV / 360.0f); float bottom = -top; float right = aspect * top; float left = -right; // projection GLKMatrixStackLoadMatrix4(projectionStack, GLKMatrix4MakeFrustum(left, right, bottom, top, near, far)); // identity modelview GLKMatrixStackLoadMatrix4(modelviewStack, GLKMatrix4Identity); // switch to left handed coord system (forward = z+) GLKMatrixStackMultiplyMatrix4(modelviewStack, GLKMatrix4MakeScale(1, 1, -1)); // transform camera GLKMatrixStackMultiplyMatrix4(modelviewStack, GLKMatrix4MakeWithMatrix3(GLKMatrix3Transpose(aCamera.orientation))); GLKMatrixStackTranslate(modelviewStack, -aCamera.position.x, -aCamera.position.y, -aCamera.position.z); } - (GLKMatrix4)modelviewMatrix { return GLKMatrixStackGetMatrix4(modelviewStack); } - (GLKMatrix4)projectionMatrix { return GLKMatrixStackGetMatrix4(projectionStack); } - (GLKMatrix4)modelviewProjectionMatrix { return GLKMatrix4Multiply([self projectionMatrix], [self modelviewMatrix]); } - (GLKMatrix3)normalMatrix { return GLKMatrix3InvertAndTranspose(GLKMatrix4GetMatrix3([self modelviewProjectionMatrix]), NULL); } After that, I save the lightMatrix like this: [self.renderer setupViewWithWidth:view.drawableWidth height:view.drawableHeight camera:self.camera]; self.lightMatrix = [self.renderer modelviewProjectionMatrix]; And just before I render a 3d entity of the scene graph, I setup the light config for its shader with the lightMatrix like this: - (N3DLight)transformedLight:(N3DLight)light transformation:(GLKMatrix4)matrix { N3DLight transformedLight = N3DLightMakeDisabled(); if (N3DLightIsDirectional(light)) { GLKVector3 direction = GLKVector3MakeWithArray(GLKMatrix4MultiplyVector4(matrix, light.position).v); direction = GLKVector3Negate(direction); // HACK -> TODO: get lightMatrix right! transformedLight = N3DLightMakeDirectional(direction, light.diffuse, light.specular); } else { ... } return transformedLight; } You see the line, where I negate the direction!? I can't explain why I need to do that, but if I do, the lights are correct as far as I can tell. Please help me, to get rid of the hack. I'am scared that this has something to do, with my switch to left handed coord system. My vertex shader looks like this: attribute highp vec4 inPosition; attribute lowp vec4 inNormal; ... uniform highp mat4 MVP; uniform highp mat4 MV; uniform lowp mat3 N; uniform lowp vec4 constantColor; uniform lowp vec4 ambient; uniform lowp vec4 light0Position; uniform lowp vec4 light0Diffuse; uniform lowp vec4 light0Specular; varying lowp vec4 vColor; varying lowp vec3 vTexCoord0; vec4 calcDirectional(vec3 dir, vec4 diffuse, vec4 specular, vec3 normal) { float NdotL = max(dot(normal, dir), 0.0); return NdotL * diffuse; } ... vec4 calcLight(vec4 pos, vec4 diffuse, vec4 specular, vec3 normal) { if (pos.w == 0.0) { // Directional Light return calcDirectional(normalize(pos.xyz), diffuse, specular, normal); } else { ... } } void main(void) { // position highp vec4 position = MVP * inPosition; gl_Position = position; // normal lowp vec3 normal = inNormal.xyz / inNormal.w; normal = N * normal; normal = normalize(normal); // colors vColor = constantColor * ambient; // add lights vColor += calcLight(light0Position, light0Diffuse, light0Specular, normal); ... }

    Read the article

  • Android how to get opengl 3D coordinates in ontouch event

    - by Sandy
    I created a cube in opengl and it rotates in ontouch event. To to this I created a CustomSurfaceView as follows public class CustomSurfaceView extends GLSurfaceView { @Override public boolean onTouchEvent(MotionEvent e) { float x = e.getX() float y = e.getY(); } } Here x and y are screen coordinates. How can I get 3D coordinated from this? I have already looked gluProject and NeHe. But I dont know how to implement this in my project, it shows that there is no GLdouble,GLfloat class.

    Read the article

  • The purpose of using invert and transpose

    - by user699215
    In openGl ES and the World of 3D - why use the invers matrix? The thing is that I dont have any intuition to, why it is used, therefore please correct me: As fare as I understand, it is used in shaders - and can help you to figure out the opposite direction of the normals? Invers in ordinary numbers is like; The product of a number and its multiplicative inverse is 1. Observe that 3/5 * 5/3 = 1. In a matrix this will give you the Identity Matrix, which is the base coordinate system or the orion of the World space - right. But the invers is - some other coordinate system? You can use the transpose(Row-major order to Column-major order) of a square matrix to find the inverted matrix, as calculating the invers is process heavy - and the transpose is giving you the inverted matrix as a bi product? Again, I am looking for getting some intuition of this - and therefore be able to use it as intended. Thank you for any reply that will guide me in the right direction. Regards

    Read the article

  • libgdx collision detection / bounding the object

    - by johnny-b
    i am trying to get collision detection so i am drawing a red rectangle to see if it is working, and when i do the code below in the update method. to check if it is going to work. the position is not in the right place. the red rectangle starts from the middle and not at the x and y point?Huh so it draws it wrong. i also have a getter method so nothing wrong there. bullet.set(getX(), getY(), getOriginX(), getOriginY()); this is for the render shapeRenderer.begin(ShapeType.Filled); shapeRenderer.setColor(Color.RED); shapeRenderer.rect(bullet.getX(), bullet.getY(), bullet.getOriginX(), bullet.getOriginY(), 15, 5, bullet.getRotation()); shapeRenderer.end(); i have tried to do it with a circle but the circle draws in the middle and i want it to be at the tip of the bullet. at the front of the bullet. x, y point. boundingCircle.set(getX() + getOriginX(), getY() + getOriginY(), 4.0f); shapeRenderer.begin(ShapeType.Filled); shapeRenderer.setColor(Color.RED); shapeRenderer.circle(bullet.getBoundingCircle().x, bullet.getBoundingCircle().y, bullet.getBoundingCircle().radius); shapeRenderer.end(); thank you need it to be of the x and y as the bullet is in the middle of the sprite when drawn originally via paint.

    Read the article

  • Creating a voxel chunk with a VBO - How to translate the coordinates of each block and add it to the VBO chunk?

    - by sunsunsunsunsun
    Im trying to make a voxel engine similar to minecraft as a little learning experience and a way to learn some opengl. I have created a chunk class and I want to put all of the vertices for the whole chunk into a single VBO. I was previously only putting each block into a vbo and making a call to render each block. Anyways, I am a bit confused about how I can translate the coordinates of each block in the chunk when I'm putting all vertices into one vbo. This is what I have at the moment. public void putVertices(float tx, float ty, float tz) { float l_length = 1.0f; float l_height = 1.0f; float l_width = 1.0f; vertexPositionData.put(new float[]{ xOffset + l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, l_height + ty,zOffset + l_width + tz, xOffset + -l_length + tx, -l_height + ty,zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, -l_height + ty,zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, -l_height + ty,zOffset + l_width + tz, xOffset + l_length + tx, l_height + ty,zOffset + -l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + -l_width + tz }); } public void createChunk() { vertexPositionData = BufferUtils.createFloatBuffer((24*3)*activateBlocks); Random random = new Random(); for (int x = 0; x < CHUNK_SIZE; x++) { for (int y = 0; y < CHUNK_SIZE; y++) { for (int z = 0; z < CHUNK_SIZE; z++) { if(blocks[x][y][z].getActive()) { putVertices(x*2.0f, y*2.0f, z*2.0f); } } } } Whats any easy way to translate the vertices of each block into its correct position? I was previously using glTranslatef with each call to render block but this wont work now. What I am doing now also does not work, the blocks all render in stacks on top of each other and it looks like this: http://i.imgur.com/NyFtBTI.png Thanks

    Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >