Search Results

Search found 10789 results on 432 pages for 'cpu upgrade'.

Page 306/432 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

• Internet is far slower in Ubuntu than Windows 7 on dual-booted machine

  - by Tim

  Edit: I'll leave the original post as-is, but after further investigation, it appears that the problem is something to do with my wi-fi card. Speeds are normal when I connect via cable. Edit 2: Problem was solved. It was something to do with the wireless card drivers. I normally use Windows 7 on my laptop and have internet speeds that are normally about 15-20 Mb/s. I have recently dual-booted with Ubuntu 12.10, and have noticed that internet speeds are drastically slower in Ubuntu. When tested, speeds range from 0.2-2 Mb/s, although occasionally being significantly faster than that or even stopping completely for short periods of time. I've also noticed that when first booting into Ubuntu, speeds start fairly fast, and drop to incredibly slow with a few seconds to a few minutes. There's still some possibility that the issue may be with my ISP, as things seem slower than usual even in Windows, but I suspect that it is related to Ubuntu, as things are far slower in Ubuntu than in Windows. I'm wondering, what could be the cause of this? Potentially relevant information: -I've dual booted before on this machine with earlier versions of Ubuntu (different ISP at the time) with no problem. ISP: Rogers (Major Canadian ISP) System info (Gateway NV53a Laptop): Operating System MS Windows 7 Home Premium 64-bit CPU AMD Phenom II N970 Caspian 45nm Technology RAM 6.00 GB Dual-Channel DDR3 @ 664MHz (9-9-9-24) Motherboard Gateway SJV51_DN (Socket S1G4) Graphics Generic PnP Monitor (1366x768@60Hz) ATI Mobility Radeon HD 4250 (Acer Incorporated [ALI]) Hard Drives 733GB TOSHIBA TOSHIBA MK7559GSXP ATA Device (SATA) Networking info: Connected through Wi-Fi Atheros AR5B97 Wireless Network A

  Read the article

• Ubuntu 12.04 LTS won't install - never finishes please help

  - by Richard Higgins

  Want to try Ubuntu after using Windows for 30 years. Tried to install it 5 times on a Lenovo X120e notebook and twice on a Lenovo M57 desktop. No luck, worse than what Microsoft puts you through. I burned 12.04 LTS to disc. It installs up to the "Who Are You?" screen, then stops. Accepted the recommended computer name and lower case user name. I chose "log me in automatically." After that there is no progress bar, no rotating or pulsing button, nothing to indicate the Ubuntu has not died or fallen asleep. Is that how it is written? Never heard of a program that would take a long time to install while a user looked at a locked, dead screen. I just bought the M57 desktop for my son. It came with Ubuntu 10 something. I wanted to upgrade to 12.04 but it crashed, twice, to a DOS screen saying the pc lacked a certain "init" file. Various help screen commands did not help. On the X120e, I thought a partial-failed Ubuntu install was causing the problem, so I removed the drive and deleted the Ubuntu partition and replaced it. But same result. After I fill in my name, accept computer and user name, the "continue" button does not appear to work. I can go "back" but not forward. I have waited torturous hours. It doesn't take more than two hours to install, does it?any It is my own fault because of the high expectations I had for a sensible, hassle-free installation, but I am immensely disappointed. Thank you for any response

  Read the article

• Accessing second hard drive

  - by Jonathan

  Hi, So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris

  Read the article

• CodePlex Daily Summary for Tuesday, June 10, 2014

  CodePlex Daily Summary for Tuesday, June 10, 2014Popular ReleasesBell Open Imaging package: 1.0: First release at Codeplex.Australia Income and Tax Calculator: Australia Income and Tax Calculator 1.4: 1. added 2014 financial year 2. refactored the codeCS-Script Source: Release v3.8.1: Improved ConfigConsole AdvancedShell extensions support cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationPapercut: Papercut v3.0.0.0: Papercut has switched to semantic versioning! That means you will have to uninstall old "clickonce" versions to get the latest as it will see it as an older version. Latest Has Tons of New Features: Modern UI MVVM Architecture Watch Directories for New Messages Optional Backend Papercut Service Load on Windows Startup Attachments/Mime SectionsExperfwiz (Exchange Performance Data Collection tool): Experfwiz 1.3.8: List of updates in 1.3.8 Added support for Windows 2012 & 2012 R2 (for future use) Added support for Exchange 2013 Full is now enabled by default. To disable full mode, use 'nofull'. Exchange 2013 requires full. Added "\Processor Information()\" counters to Exchange 2010 full Blocked Exmon execution on Exchange 2013BugNET Issue Tracker: BugNET 1.6: Version 1.6 is a major upgrade to the latest frameworks and components by Microsoft. It includes a major UI overhaul using the bootstrap framework to have a modern, mobile friendly and easily customized layout. Upgrade to .NET 4.5 ASP.NET social auth Add script bundling and optimization Improvements for mobile devices Bootstrap (UI overhaul) Rewritten / friendly URL's Please read our release notes for BugNET 1.6: http://blog.bugnetproject.com/2014/06/08/bugnet-1-6-and-bugnet-pro-1...NDataTable: NDataTable Source Code: Source codeWindows System API in Visual Basic: DataTools Merged Beta 2.4: Added FileSystemWatcher and demonstration to this release..NET Memory Tools: DataTools Merged Beta 2.4: Added FileSystemWatcher and demonstration to this release.freeasyExplorer: 3. Alpha: This is the 3th alpha release. Please inform me if you find some issues or problems. Fixes: - add assembly informations - set list view to list mode and add custom icon - add settings window - update Mahapp.Metro Framework - add drag&drop functionality - change target .net versionkbvault-mysql: V0.16a: Additions for SEO friendly pages,printer friendly view option and tag cloud on landing pageSFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun Einstellbarbabelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...ClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedNew ProjectsATC FSX Console: Flight Simulator CodeCRM 2011 Duplicate Detection Sample: CRM 2011 Duplicate Detection Plug-in SampleCustomisation tool for Visual Studio projects: This tool is used to speedup the setting up of a Visual Studio projects and suppress any repetitive manual tasks.D3 Focus: A basic tool for people with trouble deciding what to do with their time in Diablo 3.EPS - PowerShell templating: EPS (Embedded PowerShell), inspired by erb, is a templating system that embeds PowerShell code into a text document such as HTML files. Export Bugs: Export Bugs is an application using the TFS API. Killer Bytes Pack: project of class visual studioMagickViewer: An application that uses the Magick.NET library to display images.Mario Card: https://drive.google.com/?authuser=0#folders/0B0VMM5klwOkwLXptMVV6b3NhRVEOZone: OZonePlexApp PowerShell Module: PoSH4PlexApp is an in-development PowerShell module for querying and managing PlexApp libraries via Plex Media Server's HTTP listener. Contributions welcomeProduct Usage Tracker: This project is about creating a tool/mechanism to capture and record the usage volume and usage patterns of any application.Project C²: A simple lightweight C-style programming language for near-hardware system development using GNU GAS as a back-end.Random Execute: Random Execute is a command wrapper that randomizes the start time of a processes execution.RuLaw.NET: .NET library for official Russian State Duma API web service for querying and searching information of laws, deputies, authorities, sessions, votings, etcTest_DB_Name_Check: Latestweb_gioman_proyecto: proyecto de lucas gioiaWPF Globalization and Multi-language Application: Multilingual User Interfaces providing support for switching UIs from one language to another. ??????-??????【??】: ????????,??????:?????,?????,??????,??????????,????????。????????!??????-??????【??】: ?????????????????????????????,??????????,????,????,?????????、??????,??????。?????-?????【??】: ???????????????????,??????????,????????、????,??????????,??????????。?????-?????【??】: ?????????????????、????,??100%????,??????,????????????,???????????!?????-?????【??】: ??????????????????????:????、????、??????????????,????????。????????!??????-??????【??】: ??????????????????????????,????,????,??????????。???????????????,??,??,??????????,????????????-??????【??】: ???????????????????,?????????????,????,?????????,?????????????,?????,?????!??????-??????【??】: ??????????????????,???????????,??????????????,??????????，??????????????！?????-?????【??】: ????【??:13406937288 ??? QQ:798761615】???????????????,???,??????????、???????????????????。??????,????、????，??????！ ?????-?????【??】: ???????????????,?????????????? ??。????????、????、????、?????????? ???????。?????-?????【??】: ????????????????,???????????????。???????????,??????:????、????、????????????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】?????????????????,????,????“???、???、???”?????,?????,?????????????????。??????！?????-?????【??】: ?????????【??:13406937288 ??? QQ:798761615】,???????????,??????????,????:??,????,???????? ??????????,????????。??????！?????-?????【??】: ?????【??:13406937288 ??? QQ:798761615】????:?????,??????!???????????????,???????、?????、??????“??”????,????,????!?????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】???????,??????,??????,??????、??????,??????、??，????，????????????-??????【??】: ?????????【??:13406937288 ??? QQ:798761615】????????????????????,???????????,??????,??????????????...????????。??????！?????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】?????????、?????????,??????、??????????????????,???????.??????????,????????。??????-??????【??】: ?????????????????,??????????、??????,??????????、????、????、???????。??????-??????【??】: ??????????????????????,???????????????,???????,?????,?????,????? !!!?????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】????????,????,?????、???、?????,???????,?????,???????????100%。??????！????-????【??】: ???????????、??????????????????,????????,?????,??????,????,????,????!?????-?????【??】: ?????????????????????,???????????????,????????????????????!?????-?????【??】: ?????????【??:13406937288 ??? QQ:798761615】???2005?,????????????????????,??????????,??????。?????,???????????????????，??????！?????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】???????:??????!?????!???:????、????、????、????。??,??????????!??????.?????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】??????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】: ?????????????????:??????!?????!???:????、????、????、????。??,??????????!??????.?????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】 ?????????????????,????,????“???、???、???”?????,?????,?????????????????。??????！?????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】?????????????,??????,???????????,????????????????,????????.??????.?????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】???1992?,????????????????。??????????????????????。????????????,????，????????！?????-?????【??】: ?????【??:13406937288 ??? QQ:798761615】??????:?????,??????!???????????????,???????、?????、??????“??”????,????,????! ?????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】????????,????,?????、???、?????,???????,?????,???????????100%。??????！??????-??????【??】: ????????【??:13406937288 ??? QQ:798761615】?????????、?????????,??????、??????????????????,???????.??????????,????????。?????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】???1992?,????????????????。??????????????????????。????????????,????，????????！ ?????-?????【??】: ?????????【??:13406937288 ??? QQ:798761615】???2005?,????????????????????,??????????,??????。?????,???????????????????，??????！?????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】??????????????????,???????????,??????,??????????????...????????。??????！?????-?????【??】: ?????????????【??:13406937288 ??? QQ:798761615】?????????????,??????,???????????,????????????????,????????.??????.??????-??????【??】: ???????????,?????,???????????,???????,????,????,????,?????。??????-??????【??】: ????????????????8?，????????,????????,??????????,?????,????? ,????????!??????-??????【??】: ????????????????6?,???????????????????????????,??????????????,?????????！?????-?????【??】: ?????????????【??:13406937288 ??? QQ:798761615】???????,??????,??????,??????、??????,??????、??，????，??????！?????-?????【??】: ???????????、???、??、??????????????????????????????,????????????????!?????-?????【??】: ????????????????????????????、????、????、???????????,????,????!?????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】?????????????????,????,????“???、???、???”?????,?????,?????????????????。??????！?????-?????【??】: ???????【??:13406937288 ??? QQ:798761615】??????????,????????????,????????,???,???????????,????,????。?????,??????.

  Read the article

• Data Management Business Continuity Planning

  Business Continuity Governance In order to ensure data continuity for an organization, they need to ensure they know how to handle a data or network emergency because all systems have the potential to fail. Data Continuity Checklist: Disaster Recovery Plan/Policy Backups Redundancy Trained Staff Business Continuity Policies In order to protect data in case of any emergency a company needs to put in place a Disaster recovery plan and policies that can be executed by IT staff to ensure the continuity of the existing data and/or limit the amount of data that is not contiguous.  A disaster recovery plan is a comprehensive statement of consistent actions to be taken before, during and after a disaster, according to Geoffrey H. Wold. He also states that the primary objective of disaster recovery planning is to protect the organization in the event that all or parts of its operations and/or computer services are rendered unusable. Furthermore, companies can mandate through policies that IT must maintain redundant hardware in case of any hardware failures and redundant network connectivity incase the primary internet service provider goes down.  Additionally, they can require that all staff be trained in regards to the Disaster recovery policy to ensure that all parties evolved are knowledgeable to execute the recovery plan. Business Continuity Procedures Business continuity procedure vary from organization to origination, however there are standard procedures that most originations should follow. Standard Business Continuity Procedures Backup and Test Backups to ensure that they work Hire knowledgeable and trainable staff  Offer training on new and existing systems Regularly monitor, test, maintain, and upgrade existing system hardware and applications Maintain redundancy regarding all data, and critical business functionality

  Read the article

• Docker vs ESXi for Startup Projects - Deploying Code for Dev Testing

  - by JasonG

  Why hello there little programmer dude! I have a question for you and all of your experience and knowledge. I have an ESXi whitebox that I built which is an 8 dude that sits in the corner. I made a mistake recently and took the key that had ESXi, formatted it and used it for something else. No big deal because the last project I worked on had stalled out. I'm about to pick up another project and now I need to spin up a whole bunch of stuff for CI, qa + db, ticket tracker, wikis etc etc. I've been hearing a lot about Docker recently and as this is just a consumer grade machine, I'm wondering if it may make more sense for me to use Docker on OpenOS and then put everything there - bamboo or hudson, jira, confluence, postgress for the tools to use, then a qa env. I can't really seem to find any documents that directly compare traditional VM infrastructure vs docker solutions and I'm wondering if it is fair to compare. Is there any reason why CoreOS w/ containers would be a strictly worse solution? Or do you have any insight into why I may want to stick with ESXi? I've looked on multiple occasions and can't find a good reason not to. I'm not going to run a production env on the server so I don't need to have HA if updating security or OS for example where esxi would allow me to restart one vm at a time. I can just shut the thing down and bring it back up if I need a reboot no problem. So what's up with this container stuff? Is it a fair replacement for ESXi? I'm guessing the atlassian products would run much better and my ram would go a lot farther using docker. Probably the CPU would run much cooler too and my expensive HDD space would be better utilized.

  Read the article

• print jobs are held until the VirtualBox guest OS is reboot

  - by broiyan

  Here is the setup: VirtualBox 4.1.20 (which the Help window describes as 4.1.12_Ubuntu) Extension Pack 4.1.20 (for USB support) Windows 7 Home Premium as a guest operating system on VirtualBox Ubuntu 12.04 with dist-upgrade's to September 2012 as the host operating system. Fuji Xerox DocuPrint P205b, which I believe is a GDI printer, connected via USB. The problem is that often print jobs will sit in the print queue and nothing comes out of the printer. The printer status for the first item in the queue will be Printing even though nothing happens. Then upon rebooting Windows, the print jobs get printed, seemingly simultaneous to the rebooting process; that is as Windows reloads. One way to avoid this problem is to reboot Windows with the printer cable attached, and then submit the print jobs. The print jobs get printed in a timely manner. Perhaps VirtualBox has a problem with USB being plug-n-play and hot pluggable. It's not convenient to have the printer plugged in when Windows boots because: One, this is a laptop, and Two, I may be boot Windows for a purpose other than printing and not anticipate needing to print. Are there any recommendable fixes for this problem?

  Read the article

• Oracle Business Intelligence Applications 10g Bootcamp

  - by mseika

  Oracle Business Intelligence Applications 10g Bootcamp 12th - 15th February 2012, Reading (UK) The Oracle Business Intelligence Applications offer out-of-the-box integration with Siebel CRM and Oracle eBusiness Suite and provide pre-built Operational BI solutions for eBusiness Suite, Peoplesoft, Siebel, and SAP. This training will provide attendees with an in-depth working understanding of the architecture, the technical and the functional content of the Oracle Business Intelligence Applications, whilst also providing an understanding of their installation, configuration and extension. The course will cover the following topics:• Overview of Oracle Business Intelligence Applications• Oracle BI Applications Fundamentals and Features• Configuring BI Applications for Oracle E-Business Suite• Understanding BI Applications Architecture• Fundamentals of BI Applications Security REGISTER NOW Partner Registration Guide Price: FREE Cookham RoomOracle Corporation UK LtdOracle ParkwayThames Valley ParkReading, Berkshire RG6 1RA12th - 15th February 20129:30 am – 5:00 pm BST AudienceThe seminar is aimed at BI Consultants and Implementation Consultants within Oracle's Gold and Platinum Partners. Prerequisites• Good understanding of basic data warehousing concepts• Hands on experience in Oracle Business Intelligence Enterprise Edition• Hands on experience in Informatica• Some understanding of Oracle BI Applications is required (See Sales & Technical Tutorials for OBI, BI-Apps and Hyperion EPM) • Good understanding of any of the following Oracle EBS modules: General Ledger, Accounts Receivables, Accounts Payables System Requirements Please note that attendees are required to have a laptop. Laptop• 4GB RAM-Recognized by Windows 64 bits• 80GB free space in Hard drive or External Device• CPU Core 2 Duo or HigherOperating System Requirements• Windows 7, Windows XP, Windows 2003• NOT ALLOWED with Windows Vista• An Administrator User For more information please contact [email protected].

  Read the article

• Installation problems with Gimp 2.8 on Kubuntu 12

  - by Martyn

  I've just upgraded to Kubuntu 12.04 and having problems installing Gimp 2.8, I was wondering if anyone can help me? I've followed these instructions: sudo add-apt-repository ppa:otto-kesselgulasch/gimp sudo apt-get update sudo apt-get install gimp but get this error: The following packages have unmet dependencies. gimp : Depends: libwebkitgtk-1.0-0 (>= 1.3.10) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I've tried running these and trying again with the same problems: sudo apt-get clean sudo apt-get autoremove sudo apt-get update sudo apt-get upgrade sudo apt-get -f install also running sudo apt-get install libwebkitgtk-1.0-0 gives me this error The following packages have unmet dependencies. libwebkitgtk-1.0-0 : Depends: libgail18 (>= 1.18.0) but it is not going to be installed E: Unable to correct problems, you have held broken packages. and then running sudo apt-get install libgail18 gives me this error The following packages have unmet dependencies. libgail18 : Depends: libgtk2.0-0 (= 2.24.10-0ubuntu6) but 2.24.10-1oneiric6~ppa is to be installed E: Unable to correct problems, you have held broken packages. The bit that caught my attention was but 2.24.10-1oneiric6~ppa is to be installed - but I don't know what to do with this. I've rebooted and the error messages are the same. Can anyone help? ** EDIT ** I've found someone with the same problem, unfortunately the link is in German so I can't completely understand what the solution (last post) is - here's the google translated link : http://translate.google.com/translate?sl=auto&tl=en&js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fwebcache.googleusercontent.com%2Fsearch%3Fq%3Dcache%3A1U2Uat6XqUsJ%3Aforum.ubuntuusers.de%2Ftopic%2Fprobleme-nach-update-fehlerhafte-pakete-aus-on%2F%2B%26cd%3D3%26hl%3Den%26ct%3Dclnk%26gl%3Duk&act=url

  Read the article

• 12.04 update crash, now cannot boot

  - by EdW

  Boot now freezes the system at the "Ubuntu purple screen" with the 5 dots under it. I cannot even CTRL-ALT-F1 to get to an alternate console. Have to push reset button on computer to reboot. After the 12.04 update crash, the system would boot, but I had no icons and no launch bar and errors about missing dependencies. CTRL-ALT-F1 and ran apt-get -f install and it appeared to get the missing packages. I followed with a apt-get update; apt-get upgrade. It appeared to install all of the remaining 12.04 update packages. Rebooted to same blank screen - no icons, but got a compiz error. In console I tried "unity --reset" rebooted ... Nothing ... It's dead in the water. Tried to boot into Recovery Mode - black screen - I cannot even CTRL-ALT-Del - have to push reboot button. Fortunately, I have Mint on another partition and I can access the broken 12.04 partition. Ideas? I can back up all of my folders using Mint, but I would hate to have to do a new install.

  Read the article

• Ubuntu 12.04 server froze during the first boot after it was installed.

  - by user69021

  I installed Ubuntu server 12.04 to my new server and it failed on the first boot. It just stopped and I can't proceed any further. Server's specifications: Dell PowerEdge T620 CPU : Xeon E5-2665 2.4G x 2 RAM : 8GB RDIMM, 1333MHz x 12 HDD : 3TB Near Line SAS 7.2K x 8 RAID controller : PERC H710 GPU : NVIDIA Tesla C2075 x 4 I have a screenshot of the screen it stopped on but I cannot attach it because my privilege level is currently too low. ![freeze on boot][1] Here are the last messages while booting. [5.048743] Freeing unused kernel memory : 920k freed [5.049046] Write protecting the kernel read-only data : 12288k [5.052973] Freeing unused kernel memory : 1608k freed [5.056132] Freeing unused kernel memory : 1196k freed Loading, please wait... [5.070236] udevd[218]: starting version 175 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [5.089030] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011 [5.089518] megasas: 0x1000:0x005b:0x1028:0x1f35: bus 1:slot 0:func 0 [5.089739] megaraid_sas 0000:01:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 [5.089937] megasas: FW now in Ready state [5.090427] dca service started, version 1.12.1 [5.091463] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k [5.091578] Copyright (c) 2007-2011 Intel Corporation. [5.091712] igb 0000:06:00.0: PCI INT A -> GSI 16 (level,low) -> IRQ 16 [5.111090] megasas:IOC Init cmd success [5.123124] usb 1-1:new high-speed USB device number 2 using ehci_hcd What can I do about this?

  Read the article

• Fun Upgrading to .Net 4.0

  - by Sam Abraham

  We are currently in the process of upgrading one of our applications to .Net 4.0. Aside from us geeks wanting to always use latest and greatest technologies, an immediate business need for Silverlight 4.0 features justified our upgrade endeavor. The following is a summary of some issues we ran into with our web project:   For security purposes, the IIS 7 .Net 4.0 ISAPI filter is disabled. “Allow” it from the ISAPI and CGI Restrictions screen as shown:   Figure 1 - Allowing ASP.Net 4.0 ISAPI Filter   By default the Web Setup Project only requires the .Net Framework 4 Client Profile to be installed on target system, which offers a lighter weight install for client machines consuming .Net 4.0 applications. However, using certain .Net 4.0 features requires the full .Net 4.0 Framework as outlined in this link: http://msdn.microsoft.com/en-us/library/cc656912.aspx. We hence needed to update the installer to require the complete .Net 4.0 Framework on the target machine and to prompt for its installation if needed.   To accomplish this goal, we updated the installer’s launch conditions to check for .Net 4.0 as well as the installer prerequisites as shown:     Figure 2- Ensure Web Setup Project runs on full .Net 4.0 version Figure 3 - Launch Conditions screen Figure 4 - Set launch condition to .Net 4.0. Figure 5 -Changing installer prerequisites Figure 6 -Changing installer prerequisites

  Read the article

• Recommended storage scheme for home server? (LVM/JBOD/RAID 5...)

  - by j-g-faustus

  Are there any guidelines for which storage scheme(s) makes most sense for a multiple-disk home server? I am assuming a separate boot/OS disk (so bootability is not a concern, this is for data storage only) and 4-6 storage disks of 1-2 TB each, for a total storage capacity in the range 4-12 TB. The file system is ext4, I expect there will be only one big partition spanning all disks. As far as I can tell, the alternatives are individual disks pros: works with any combination of disk sizes; losing a disk loses only the data on that disk; no need for volume management. cons: data management is clumsy when logical units (like a "movies" folder) are larger than the capacity of any single drive. JBOD span pros: can merge disks of any size. cons: losing a disk loses all data on all disks LVM pros: can merge disks of any size; relatively simple to add and remove disks. cons: losing a disk loses all data on all disks RAID 0 pros: speed cons: losing one drive loses all data; disks must be same size RAID 5 pros: data survives losing one disk cons: gives up one disk worth of capacity; disks must be same size RAID 6 pros: data survives losing two disks cons: gives up two disks worth of capacity; disks must be same size I'm primarily considering either LVM or JBOD span simply because it will let me reuse older, smaller-capacity disks when I upgrade the system. The runner-up is RAID 0 for speed. I'm planning on having full backups to a separate system, so I expect the extra redundancy from RAID levels 5 or 6 won't be important. Is this a fair representation of the alternatives? Are there other considerations or alternatives I have missed? And what would you recommend?

  Read the article

• Fresh install on SSD with Ubuntu and Windows Vista, using whole disk encryption for Ubuntu

  - by nategator

  I would like to do a fresh install on a OCZ Vertex Plus R2 SSD 60GB drive I purchased on the cheap. Since the AES-encryption looks like it may not work optimally for this drive, I would like to set up a dual-boot to Windows Vista (the only Windows copy I have for clean install purposes) and Ubuntu 12.04 with the best encryption scheme possible. My plan is to have Windows around just in case I need to use a program that won't work with Wine and Ubuntu as my daily OS with all of my information secured in case the laptop is ever stolen or sold. Although this setup will not provide a lot of space, I think I can squeeze both OSes and have enough for second-computer office tasks. So, my questions are: Which OS should I install first, Ubuntu or Vista? Any special considerations when partitioning the drive? How should I install Ubuntu to ensure full disk encryption for the Linux partition(s) and or my daily computing? Is there a significant performance upgrade with doing a solo install of Ubuntu instead of a dual boot setup? Will TRIM, for example, work correctly? Are there any significant security concerns with going the route of a dual-boot, other than the fact that any activity on Windows may be fully recoverable if the drive is stolen or sold? Thanks in advance!

  Read the article

• Price Drop for Processor based License on Exalytics

  - by Mike.Hallett(at)Oracle-BI&EPM

  ·       33% reduction in the list `per processor` license pricing for the Oracle BI Foundation Suite ·       New capacity-based licensing which allows customers to think big & start small, significantly lowering the entry price point for an Exalytics. Oracle BI Software List Price changes In response to new powerful platforms like the in-memory Oracle Exalytics with 40 cpu cores (counted under Oracle pricing policy as 20 “processors”), the list price of “Oracle BI Foundation Suite” (BIFS) is reduced by 33% from $450K per processor to $300K per processor. Capacity-based licensing on Exalytics (Trusted Partitions) “Capacity-based pricing” for the BIFS, Endeca, Essbase and Times Ten for Exalytics software is now available for Exalytics systems. This is delivered using “Oracle VM” (OVM).  We still ship a full Exalytics machine to all customers, but they may choose to only use and license a subset of the processors installed in the machine.   Customers can license Exalytics software in units of 5 “processors”: 5, 10, 15 or the full capacity 20.   As the customer’s implementation and workload increases, it is a simple matter to license additional processors and, using OVM, make them available to the BI or EPM application. Endeca Information Discovery now available on Exalytics Oracle has also announced the certification of “Oracle Endeca Information Discovery” (EID) on the Exalytics machine.    EID can be licensed alone or in combination with the BIFS & Times Ten for an Exalytics stack, and also participates in the capacity based pricing outlined above.   The Exalytics hardware is the perfect platform for EID, and provides superb power and performance for this in-memory hybrid text-search-analytics.   For more information : Oracle Price lists Oracle Partitioning Policy Discussion by Mark Rittman (Rittman Mead Consulting ltd.) on Oracle Trusted Partitions for Oracle Engineered Systems, Oracle Exalytics and Updated BI Foundation Pricing.

  Read the article

• Free space in tmpfs partition not adding up

  - by Dean Herbert

  I have had my /tmp/ partition filling up recently when it should not be anywhere near full. On further investigation, I found that the partition was listing free space a lot lower than it should be. I am guessing a remount will fix this, but am very curious as to why this has happened and where this space has gone. du output: root@odoroki:/tmp# du --summarize -h 3.3M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.3G 653M 84% /tmp Update: after deleting some files it has happened again. du output: root@odoroki:/tmp# du -h --summarize 11M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.9G 0 100% /tmp I have a feeling this has started since a recent apt-get upgrade, but it still seems like strange behaviour. I did do a quick scan over lsof output and couldn't see any open/stuck file handles. Unfortunately due to the seriousness of the issue I had to reboot the server, after which usage seems to match correctly.

  Read the article

• Further question on Intel graphics driver

  - by Thomas Byers

  Ok, Josh answered almost immed.! I need to know specifically, now that I am using Nvidia card effectively, do I need to allow update manager to update the intel gr. drivers? I must add, I believe I know why Update Manager is telling me I need to update those Intel gr. drivers. It probably happened because I tried to update my nvidia drivers and got a buggy install, which let to to a black screen. I shut the system down manually after that and rebooted to a black screen and upon a further reboot I ascertained that I could still dual-boot(windows 7) into the other os. Then I went through the restart process and at the grub2 menu chose other options and it was probably, at that time, that Linux was smart enough to know that nvidia drivers as installed weren't cutting it, and reverted to the onboard Intel graphics system...does that make sense? Anyway, after successfully getting up and running, I reinstalled my old but successful nvidia drivers and all was well again, except now upon running Update Manager, I am offered the Intel graphics driver upgrade each time, which, up til now I have unchecked...my question is now more obvious. Should I accept the Intel driver update and if I do, will it once again override my nvidia drivers?

  Read the article

• Why does running this program on 11.10 give a 'GLIBC_2.15 not found' error?

  - by RafLance

  I am trying to install Absinthe 2.0.4 on Ubuntu 11.10 on a netbook. When I try to run the install file, this keeps on happening: rafael@RafLaptop:~/Desktop/absinthe-linux-2.0.4$ ./absinthe.x86 ./absinthe.x86: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by ./absinthe.x86) Do I need to upgrade GLIBC? If so, how do I do that? Since I'm on a netbook I can't use a LiveCD so I wanted to know if there was a way I could fix this issue without reinstalling my whole OS. Any explanations about what GLIBC is exactly would be great too since this is a learning experience for me. I know that GLIBC is a part of libc.so.6 and so I tried to run sudo apt-get install libc.so.6 but was told that it was up to date. But GLIBC isn't? I hope this articulates my problem well, if there are any pieces of missing info or questions to clarity my question, please let me know! ~-~ EDIT/UPDATE: So after some help on the AskUbuntu chat room from user izx, I have gathered the following information/understanding: -I need to run this program with Ubuntu 12.04 or recompile it from source -Upgrading libc on Oneiric to 2.15 while possible, is not an easy task and is not officially supported.

  Read the article

• Can't enable bluetooth because of adapter

  - by Eray

  I can't use my Bluetooth with Ubuntu 12.04 64bit . I have installed bluetooth, gnome-bluetooth and blueman packages. But i'm getting No adapter found error. eray@eray-vaio-ubuntu:~$ sudo hciconfig hci0 reset [sudo] password for eray: Can't init device hci0: Connection timed out (110) eray@eray-vaio-ubuntu:~$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: sony-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: sony-bluetooth: Bluetooth Soft blocked: no Hard blocked: no eray@eray-vaio-ubuntu:~$ sudo hciconfig sony-bluetooth reset Can't init device hci0: Connection timed out (110) eray@eray-vaio-ubuntu:~$ I'm remambering, i was able to use my bluetooth with Ubuntu, about 7-8 months ago. So Ubuntu supporting my bluetooth device. How can i install my bluetooth and solve this problem ? NOTE , I've read a lots of question about this. Generally there are 3 answers. Upgrade to 12.04 execute sudo hciconfig hci0 reset command unblock your device if it's blocked. But as you seen, none of them helped me. Because of this, i'm asking this question.It's not a duplicated question.

  Read the article

• Really impossible to have Gimp 2.8 on Ubuntu 11.10?

  - by ubuntico

  For days, I have been trying to find a solution and repositories to install Gimp 2.8 on Ubuntu 11.10. Each time I get this error: Tried to update pango via sudo apt-get install pango-graphite [sudo] password for xxx: Reading package lists... Done Building dependency tree Reading state information... Done pango-graphite is already the newest version. Then also tried sudo apt-get install libgdk-pixbuf2* Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'libgdk-pixbuf2.0-0' for regex 'libgdk-pixbuf2*' Note, selecting 'libgdk-pixbuf2.0-dev' for regex 'libgdk-pixbuf2*' Note, selecting 'libgdk-pixbuf2.0-doc' for regex 'libgdk-pixbuf2*' Note, selecting 'libgdk-pixbuf2-ruby' for regex 'libgdk-pixbuf2*' Note, selecting 'libgdk-pixbuf2-ruby1.8' for regex 'libgdk-pixbuf2*' Note, selecting 'libgdk-pixbuf2-ruby1.8-dbg' for regex 'libgdk-pixbuf2*' Note, selecting 'libgdk-pixbuf2.0-common' for regex 'libgdk-pixbuf2*' libgdk-pixbuf2-ruby is already the newest version. libgdk-pixbuf2-ruby1.8 is already the newest version. libgdk-pixbuf2-ruby1.8-dbg is already the newest version. libgdk-pixbuf2.0-doc is already the newest version. libgdk-pixbuf2.0-0 is already the newest version. libgdk-pixbuf2.0-dev is already the newest version. libgdk-pixbuf2.0-common is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 31 not upgraded. And still error :(. Please help as I do not want to upgrade to Ubuntu 12.04 just to have Gimp. Really a mission impossible????

  Read the article

• Using EC2 instance as main development platform

  - by David

  My problem I am working as a consultant for various companies. Each company provides me with a laptop where with their software on and I also have my own where I have my development environment. I tend to buy a new laptop every second year and find myself spending lots of time configuring and installing software. I also sometimes spend a lot of time waiting for my laptop to process things. To solve all these issues, I am now considering using EC2 (running windows instances) as my main development platform and just access this from any PC I happen to be at. I calculated that running the High-CPU On-Demand Instances (medium) for 8 hours a day for a year costs me 580$, which is acceptable. I imagine that when I approach the workplace each day, I will make a single click my phone to fire up the instance, so it is ready when I get to work. I should have different icons on my phone to fire up the various instance types. The same software should of course automatically be loaded on the various hardware (sometimes I would even need their instance with 68.4 GB of memory). Another advantage is that if I am having a specific problem with my instance, I could fire up another instance and have someone look into the problem and update the image. My question: Does anyone have experience with such a setup on EC2? What kind of problems do you forsee?

  Read the article

• MSDN Live 2010 &ndash; Delivered : 24 sessions (4 x 6) on Visual Studio and Team Foundation Server

  - by terje

  We (Mikael Nitell and me) got a whole track on the Norwegian MSDN Live tour this year.  We did these as a pair, and covered 4 cities over 4 days, 6 sessions per day, taking 8 hours to come through it.  The Islandic volcano made the travels a bit rough, but we managed 6 flights out of 8. The first one had to go by van instead, 7-8 hour drive each way together with other MSDN Live presenters – a memorable tour! Oslo was the absolute top point.  We had to change hall to a bigger one. People were crowding, and even the big hall was packed!  The presentations were mostly based on demos, but we had a few slides as well.  They have been uploaded to my SkyDrive.  Info to aliens – some of the text may be Norwegian. The sessions were as follows: Overview of news in Visual Studio and Team Foundation server 2010 Ensuring Quality with VS/TFS 2010 Releasing products with VS/TFS 2010 No More No Repro with VS/TFS 2010 Performance Testing and Parallel Programming with VS/TFS 2010 Migrating to VS/TFS 2010 Tips, tricks, news and some best practices with VS/TFS 2010   In the coming days, I will post up examples from the demos too, with explanations of how they are intended to work. These entries will also contain stuff we had to remove from the actual presentations due to the time constraints. We managed to create recordings of two of the sessions, which will be uploaded to Channel 9 by Microsoft, afaik.   I will update this blog with information about exact locations when that is done. Also note we’re (read:Osiris Data AS) running both Upgrade and Deep Dive courses  on VS/TFS 2010 now in May.  Please look here for more info. If you want to be informed, follow me on Twitter.  All blog entries will be announced on twitter.

  Read the article

• Ubuntu 12.04 stopped recognizing my BenQ monitor and reduced resolution to 1024x768

  - by Omri

  A few days ago I installed Ubuntu 12.04 32bit Desktop. It recognized my hardware without a problem (at least that I know of) and all worked fine. I left my system running (it is at work) through the night because it is also working as a database server and when I came today to work the resolution was 1024x768 (the monitor recommends 1920x1080) even though in the Display section of the System Settings it was recognized as BenQ, and no higher resolution was offered. After a restart, the monitor name changed from BenQ to Unknown. This is a desktop computer. I also installed gtk-redshift and f.lux. I checked Additional Drivers to see if there is something I can install but it didn't find anything. I tried to Google it but I didn't find anything about a monitor stopping being recognized after it was already working. I did enable some PPAs yesterday, namely webupd8, mozillateam/thunderbird-stable and some other, and I also followed the instructions to patch the NotifyOSD to be more friendly: sudo add-apt-repository ppa:caffeine-developers/ppa sudo add-apt-repository ppa:leolik/leolik sudo apt-get update sudo apt-get upgrade sudo apt-get install libnotify-bin pkill notify-osd sudo add-apt-repository ppa:nilarimogard/webupd8 sudo apt-get update sudo apt-get install notifyosdconfig I now purged both caffeine-developers and leolik PPAs in the hope it will help, but no change. Has there been a change in the packages that could introduce this problem? Any help will be very appreciated :-) Omri

  Read the article

• How do I source a shell script for Node Version Manager?

  - by Matthew Patrick Cashatt

  Hi and thanks for looking! I am new to Linux/Ubuntu, but I have set up an Ubuntu box on which to run Node.js. I have had moderate success, but now I need to be able to easily upgrade my version of Node. Many folks recommend using Node Version Manager. I followed the directions, but when I try to do something like this: nvm ls I get a messaging stating that No command NVM found I have gone back to check the steps I followed to install NVM, but there is one part that is tricky for may and I think to be the culprit: sourcing the file for bash. From the instructions: To activate nvm, you need to source it from your bash shell . ~/nvm/nvm.sh I always add this line to my ~/.bashrc or ~/.profile file to have it automatically sources upon login. Often I also put in a line to use a specific version of node. So which file should I add this to? I am guessing profile since it's ubuntu?? Also, where in the file do I add this line? After I have added this line, do I need to reboot or anything? Any help would be deeply appreciated--especially if you can show me an example profile file with . ~/nvm/nvm.sh integrated so that I can see usage. Thanks, Matt

  Read the article

• apt-get issue after upgrading to 12.04

  - by user83906

  I have recently upgraded my cluster from 11.10 to 12.04. After the upgrade, I am having trouble running apt-get on the cluster nodes. I can ssh between the nodes (client-to-client; client-to-head; client-to-external etc.). However, sudo apt-get update produces the following errors: Ign http://us.archive.ubuntu.com precise InRelease Ign http://security.ubuntu.com precise-security InRelease Ign http://www.openfoam.org maverick InRelease Ign http://us.archive.ubuntu.com precise-updates InRelease Err http://security.ubuntu.com precise-security Release.gpg Something wicked happened resolving 'security.ubuntu.com:http' (-5 - No address associated with hostname) Err http://www.openfoam.org maverick Release.gpg Something wicked happened resolving 'www.openfoam.org:http' (-5 - No address associated with hostname) Ign http://us.archive.ubuntu.com precise-backports InRelease Ign http://www.openfoam.org maverick Release Ign http://security.ubuntu.com precise-security Release Err http://us.archive.ubuntu.com precise Release.gpg Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) Ign http://security.ubuntu.com precise-security/main Sources/DiffIndex Err http://us.archive.ubuntu.com precise-updates Release.gpg Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) Ign http://security.ubuntu.com precise-security/restricted Sources/DiffIndex 15% [Connecting to us.archive.ubuntu.com] [Connecting to security.ubuntu.com] [Connecting to www.openfoam.org] On the headnode, I have in /etc/network/iterfaces: auto eth0 iface eth0 inet static address 192.168.0.1/24 On the client nodes, I have /etc/network/iterfaces: auto eth0 iface eth0 inet static address 192.168.0.101 netmask 255.255.255.0 gateway 192.168.0.1 Please advise.

  Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >