Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 306/421 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

• erratic audio levels on windows vista

  - by old retired dude

  I'm somewhat hard of hearing. I've been listening to my windows Vista machine with a pair of headphones so I don't annoy the others. I have 2 issues: 1) the volume varies enormously depending on the source. Having a windows alert occur while I am listening to a DVD or Youtube is a painful experience. Is there a preferred way to set all the different audio controls so I have a more constant volume? I already have lowered the volumes of the windows alerts. 2)Is there a way to limit the volume of my headphones to protect what is left of my hearing? Is there a software solution or should I be going for a hardware limiter? thanks retired dude

  Read the article

• Windows 7 on 1st Gen Macbook Pro (Q4-2008), power management problems.

  - by typemismatch

  I have the first generation macbook pro, purchased Q4 2008. I've been trying to run Windows 7 and can get it all installed great with the BootCamp 3.1 64 bit drivers however ... power management isn't great. The screen and keyboard don't automatically dim - the laptop gets too hot. I noticed on some newer macbook pros that windows 7 works perfectly and the above doesn't happen. Does anyone know if there really is a hardware issue with this 1st gen or is there some firmware update I can use to fix this? Thanks!

  Read the article

• Why has ESXi 5.0 not used the software RAID configuration on my test server?

  - by kafka

  I've got a test server which was running WS 2008 Enterprise on the bare metal. It was correctly using the software RAID 1 configuration (2x250 GB disks which appeared as one disk), setup on the Dell Poweredge T110 (which meets compatibility requirements) without requiring any extra setup from me. (As an aside I'm fairly sure it's software RAID, as we didn't spec a hardware RAID controller, if that's of any importance in this situation). I am now testing installing ESXi 5.0 on this server to run some VMs. I've successfully installed ESXi, and imported a VM fine, but it's showing 2 x 250 GB disks available as datastores. However they should be appearing as one volume. When I boot the server, there is a RAID configuration screen you can enter, and I'm guessing this is what I'll have to do at some stage, but now need to be very careful because there is one disk which contains data that I want to be mirrored on the other disk. What is the best thing to do in this situation?

  Read the article

• Tracking costs within one AWS account

  - by caius howcroft

  I have what I'm sure is a very common problem. Our company has many projects and groups working for different clients. We do a lot of our development work in the cloud and deploy our solutions there. We have a VPC set up that isolates projects from each other in their own subnet and that VPC is getting a hardware VPN connection back to HQ. We need to keep track of the cost run up by every project. The way I currently implement this is by providing my own tools for starting and stopping instances which log which user (and thus which project) to bill the instance too. This works okay for BoxUsage costs but not for other costs. I could create a separate account for each project and use consolidated billing, this I think would allow me to pay once but track costs per "project", but I would then not be able to share common resources (like bring account B's running instances inside the same VPC). Does anyone have any suggestions? Cheers C

  Read the article

• Filtering serial port io

  - by mr odus

  I am currently working on a project where I communicate with hardware via a com port on its respective pc(win xp or 7) It is a fairly large project and sifting through the log file can be a bit of pain. This is my current setup. I use putty to do the actual serial communication, and write it to a log file. Then using MinGW Msys I filter it using tail -f "puttyLog" | grep -i "search term" Is there a better way to do this? I mean specifically filtering the input in realtime. Not that mine is terrible, but it still involves having to read from a log and sometimes there have been hangups where it will be delayed for a minute or 2. I have used software in the past with a main io window and then internal filter panels, but can no longer remember or find it.

  Read the article

• Remote access to BIOS?

  - by j-g-faustus

  I have a home server running headless (i.e. without a monitor), using ssh for remote access. This works fine most of the time, but I still need a graphics card and still need to drag out a monitor whenever I have to access BIOS, (re-)install the OS and similar. I know that there are business servers that let you control everything remotely (over Ethernet), including power up and BIOS access. Is this type of functionality available for "prosumer" class hardware? If so, where does it sit - should I look for motherboard support, a PCI-e card or an external device? And does this type of functionality have a name, so I know what to google for?

  Read the article

• How can I troubleshoot SSD disconnection problems on Windows 7?

  - by 0xC0000022L

  I have a small SSD (Transcend StoreJet TS256GESD200K) which I am using on several computers. The drive is formatted with NTFS and recently I started noticing disconnects. Normally one probably wouldn't notice (you don't even get the notification sound in Windows when it disconnects), but since I use USBDLM and run a VM from that SSD, I get to see this first-hand. How could I best figure out whether the problem is the hardware (SSD, USB socket, USB cable or something in the PC) or software? In short: how can I locate the source of the disruption so that I can work on removing the problem? Side-note: SMART status for the SSD is clean.

  Read the article

• Cisco redundancy modes

  - by user974896

  I am using a Cisco 6500 series with an SSO redundancy configuration. The show redundancy output is as follows: Hardware Mode = Duplex Configured Redundancy Mode = sso Operating Redundancy Mode = rpr Maintenance Mode = Disabled Communications = Up I would assume the device is operating in RPR mode although SSO is configured. What could cause this? Shouldn't the operating mode be SSO? EDIT (show redundancy states): my state = 13 -ACTIVE peer state = 4 -STANDBY COLD Mode = Duplex Unit = Primary Unit ID = 5 Redundancy Mode (Operational) = rpr Redundancy Mode (Configured) = sso Redundancy State = rpr Split Mode = Disabled Manual Swact = Enabled Communications = Up client count = 60 client_notification_TMR = 30000 milliseconds keep_alive TMR = 9000 milliseconds keep_alive count = 1 keep_alive threshold = 18 RF debug mask = 0x0

  Read the article

• Can I use the voice & SMS features of my GSM SIM through my laptop?

  - by i..

  My laptop (a Lenovo T410s) has an internal GSM modem (device manager calls it a Qualcomm Gobi 2000 HS-USB Modem 9205) that I'm currently using a regular (voice, data, text, etc) 3G SIM in. The data functionality works great through the Lenovo software & Windows 7 but I was wondering if I can use the other features (specifically voice & SMS) through Windows. Is it posisble to use the non-data features of my 3G SIM through my Qualcomm GSM modem? If so, what software is available to this end? If not, where is the restriction? (e.g. hardware, OS, driver, software) Thanks!

  Read the article

• How to set up my network/bridging using Apple Airport equipment?

  - by John

  I'd like to set up my network like this, and I want to make sure it's possible using the hardware I have. I think it should be... I've got my cable modem in one room. I want to plug it into an Apple Airport Express and create my wireless my wireless network here. The airport express will do the NAT and DHCP. By my TV there are a few things to be networked (Xbox and Tivo). I have an airport extreme here. I'd like to have the airport extreme join the wireless network and share the connection to the ethernet ports. Can anyone provide some assistance on the best way to configure to do this? Thanks!

  Read the article

• Virtual system drive is split between separate LUNs

  - by Tigran

  My hardware VMWare guy told me that a Win2008R2 server I have has a D drive that is split between two separate LUNs. He could not tell me if that's a good thing or bad just that it's not standard practice for him. Would you please explain the benefits or drawbacks of this setup? Thanks EDIT Some additional info. What happened was I had D drive already allocated. Then I asked for more. They said there's no more space on whatever LUN my D drive is on so the option they gave me was that part of the D drive will be on one LUN and other part will be on another LUN. Hope that helps

  Read the article

• Win 7: Share internet connection via Ethernet and WiFi

  - by Anvaka

  I have the following configuration: Box 1. Running Win 7, connected to the Internet via Eth0. Has one wireless network adapter and one another ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration.

  Read the article

• Win 7: Share internet connection via Ethernet and WiFi

  - by Anvaka

  I have the following configuration: Box 1. Running Win 7, connected to the internet via Eth0. Has one wireless network adapter and one more ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration

  Read the article

• Which SATA controller is better to use with Windows Server 2008 R2 64 bit?

  - by at8eqeq3

  We're preforming some hardware upgrade on our server machines. As a part of this process, we have to install some additional disk drives. Unfortunately, total number of drives will become 7 or 8, while all of our motherboards have only 6 SATA ports. Obviously, we need additional disk controllers. For now, we've tested Silicon Image (actually, no-name) and Adaptec controllers, both on SiI3132 chip, and got some problems with drivers for them: Silicon Image drivers are not installing at all, and Adaptec ones are installing, but the system says they're not signed and becomes unbootable. We're tryed both drivers from controllers' CD's and latest versions from manufacturers' websites, and no luck. So, can you recommend some SATA controllers that will really work without tambourine dances on mentioned OS (we need just 2 SATA ports and PCI-E, while RAID and any other features are no-matter)? Thanks for any help.

  Read the article

• Windows 7 upgrade advisor issue

  - by Groo

  I am preparing to migrate a pretty old XP machine to Windows 7. I ran the Windows 7 Upgrade Advisor and got a couple of smaller issues (low 512Mb RAM complaints and similar stuff). Apart from that, everything else was shown as compatible, including my old ATI Radeon 9550/X1050 card: ATI Radeon 9550/X1550 Series: This device is compatible with Windows 7. The thing that concerns me is that people around the web seem to be unable to actually find a Windows 7 driver for this card. Even the ATI web page states that this is a legacy device: If the user chooses to, they can install the ATI Catalyst Windows Vista graphics driver under Windows 7. [...] Using the ATI Catalyst Windows Vista driver under Windows 7 is not officially supported by AMD [...] Should I trust the Advisor and continue with the update? Does this mean Microsoft will provide at least a generic driver which will allow hardware acceleration with this card?

  Read the article

• some keyboard keys not working properly

  - by surfmadpig

  I'm using Windows 7. All of a sudden, a couple of hours ago, this happened: My keyboard number keys [above the letters] stopped working properly, both as numbers and as symbols. Only 5 and 6 are functional. Also, I've noticed that the End key isn't working either, and perhaps a couple more from that group. I'm pretty sure it has something to do with those evil Sticky Keys/Filter Keys/ whatever those ease of access things are, BUT I've turned off all the ease of access keyboard options and nothing has changed. Is it possible that something is still turned on while I unchecked it? Are the on/off checkboxes to control WHEN it happens or IF it happens? I also tried rebooting and uninstalling/reinstalling keyboard from device manager, to no avail. It's certainly a software issue and not a hardware issue, as I've tried another keyboard and the problem persists. And, predictably enough, it's annoying. Any ideas?

  Read the article

• Do all domains on the same shared hosting server have the same IP or ID

  - by silow

  Here's what I've got: siteA.com and siteB.com are hosted on hostgator. They're hosted on the same account of a shared hosting server (not VPS or dedicated). script.php is an external site that each of these 2 sites are accessing. I noticed that when siteA.com or siteB.com access the outside script.php, the script identifies them both as 1a.12.12ab.static.theplanet.com (apparently because hostgator uses theplanet.com servers). The fact that they're identified as the same value isn't surprising because after all they're hosted on the same account /home/user123/public_html. What I'm wondering about is how about other websites that are hosted on the same shared hosting server, but under other accounts. Basically other websites that are under another developer's control, but just happen to share the same hardware (hosting server). Do they also have the exact same identifier 1a.12.12ab.static.theplanet.com or that changes by account?

  Read the article

• What would you use to keep track of all the random information about your LAN/Enviroment?

  - by agnul

  Say you work in your average anarchy... no appointed IT guy, no Office-Manager whatsoever, just developers working in free-for-all mode and a couple of non technical people around for admin (non IT) stuff. What would you use to keep track of Hardware / Software inventory Backups of OS images, Drivers, and all that LAN configuration information Passwords for all the systems Currently I'm thinking of having some sort of wiki + web server on our only ''server-class'' machine, but then I fear I'd be the only one who would go through the hassle of adding information in the wiki... So, have you been through that? What would you suggest?

  Read the article

• Feeding the kernels entropy source from other machines and/or increasing its maximum size

  - by David Spillett

  We have has a little trouble with a small box that acts as a VPN end-point and mail relay for our network, caused by the available entropy for /dev/random being too low (which causes TLS connection attempts by exim to fail). The machine doesn't do anything else, so the normal feed into the entropy pool (interrupt timings from things like disk access) is not enough. As a quick hack I've set a looping script that reads from /dev/hda at a couple of Mbyte/sec which keeps it topped up. Other than buying a hardware RNG, is there a clean way of piping data for entry from elsewhere, such as a copy of the data our file server uses for its entropy source? I've spotted several tips for using rng-tools to feed it from /dev/urandom on the same machine but that "feels dirty". Also, is it possible to increase the maximum pool size? It currently seems to max out at 3585.

  Read the article

• Can i create a virtual machine on my laptop to be used with another monitor?

  - by Ranhiru

  OK, the scenario is like this... I have my laptop... and I have another user without a unit. He has only a keyboard, mouse and a monitor. Is there anyway that I can make him use my computer by creating a virtual environment which he will access, BUT, without interfering with my work. I use my laptop and view my OS from the laptop monitor. I create a virtual environment (some OS probably XP) and run it. The virtual environment is displayed in the connected monitor and the other user uses it using the extra keyboard/mouse and the monitor but without interfering my screen! Is this possible? Stupid? Futuristic? Need more hardware?

  Read the article

• How do you keep up with Nagios/Capistrano configs when using EC2?

  - by imaginative

  I use Amazon EC2 for my mobile app. Depending on load of the application at a given time, I might spawn new instances and then take them down when load is lower to save costs. How does one keep up with Nagios configurations for such a dynamic environment? When one deals with managed hardware, configuration files are predictable. In this case Nagios, Capistrano and a bunch of other configuration files would need to be added. Capistrano needs to know where to deploy a new build to for an app server. Nagios needs to know to remove an existing instance or add a new instance for monitoring. Nagios also needs to know if a node was intentionally taken down or if the host is down due to error. How is this done with the wonderful world of VPS/dynamic instances?

  Read the article

• Q: MySQL Cluster - Data insertion in NDBCLUSTER table - error out after 5 million rows

  - by Mata

  MysqlCluster version: mysql-5.6.11 ndb-7.3.2 Insertload = 50 M dataset Datanodes = 3 LOAD DATA INFILE '/input_50m/Table_1_sorted.csv' IGNORE INTO TABLE nw_ndb FIELDS TERMINATED BY ',' LINES TERMINATED BY '\n' We recently setup a new mySQL cluster and trying to load data from a flat file. But getting error “Got temporary error 4010 'Node failure caused abort of transaction' from NDBCLUSTER" when inserting 5 million rows in a single table in MySQL Cluster. We are using "LOAD DATA INFILE" command to load the data in the table from csv file. Server (musqld, ndb nodes) has good hardware: 126 GB RAM, 32 Gb allocated to mysqld tried below settings with no effect: SET autocommit=0; SET FOREIGN_KEY_CHECKS=0; SET unique_checks=0; SET GLOBAL ndb_batch_size=8*1024*1024; SET GLOBAL ndb_cache_check_time = 1000; SET GLOBAL ndb_index_stat_cache_entries = 10000000; SET SESSION BULK_INSERT_BUFFER_SIZE=256217728; SET GLOBAL KEY_BUFFER_SIZE=256217728; Any clues?

  Read the article

• Default Webcam Driver Issues

  - by Omegaclawe

  I'm having troubles getting my monitor-attached webcam (ASUS VK248H) to install on my new computer. On the old computer, it was a matter of not using a USB 3.0 port, but I can't get anything to work on the new one. I have tried all manner of uninstalling/reinstalling the driver and resetting the computer, as well as literally every USB port on the computer (14 in total). It's not that windows isn't recognizing the device; it most certainly is. However, comparing it to the old computer's driver details, on the new computer, it is not using the ksthunk.sys driver in addition to the usbvideo.sys driver, like on the old (working) computer. Naturally, I figured the way ahead was to simply get this other driver to work with the hardware, but haven't really found out a way to do that. Does anyone know of a way I can force it to use ksthunk.sys? It seems rather difficult to get it to install anything when Windows is feeling that everything is peachy.

  Read the article

• What rights does an employer have to the employee's computer?

  - by Terrence Brannon

  What access rights should an employee grant an employer for a work computer? For instance, let's assume that the business people come to the IT lab late at night for discussions with the CIO and they use my computer for reading email and general web surfing. In a sense, this means that they are taking full or partial responsibility for any security issues that crop up that get traced back to the employee's machine. Perhaps the proper way to provide a computer to an employee is to give him full and exclusive use of it while employed. Only supervised access (such as hardware/software maintenance) should be acceptable.

  Read the article

• Which one is better deal: iPed or Apple iPad?

  - by Evan Carroll

  The Chinese knockoff iPed is now in the wild and receiving a lot of attention? Does anyone know how the Android distribution it ships with compares with Apple iPad's software pack? How does the look-and-feel of the iPed fit with the Apple iPad? Quite frankly, I have little interest in Apple products because of the company policy. But, cheaper comparable hardware running open-source software is pretty interesting... Anything useful to add.. Here are the Apple iPad specs for comparison. The iPed is priced at $199.00, the Apple iPad starts at $499.00 .

  Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >