Search Results

Search found 22499 results on 900 pages for 'boot screen'.

Page 307/900 | < Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >

• Serious 64-bit laptop

  - by Daniel Gehriger

  For the past couple of years, I have been using an IBM Thinkpad T60p for daily work (software development, desktop & embedded). I am extremely satisfied with this machine, due to its robustness. It also has a few features I depend on: a high resolution display: 15.0" TFT FlexView display with 1600x1200 (UXGA); excellent keyboard; decent graphics and CPU performance. Some of the software I develop benefits from larger amounts of RAM, and 3GB (Windows 7 32-bit) or 4GB (Windows 7 64-bit on T60p) are no longer sufficient. My customers run desktop computers with 20GB and more, and I need to have at least 8GB to at least be able to run reasonable test cases. So I'm shopping around for a new laptop, but I'm struggling to find anything that matches my requirements: must run Windows 7 64-bit Pro or higher; must support at least 8GB of RAM (more is better) high screen resolution! While I prefer 4:3 I can live with wide screen. But I really hope to find something with a vertical screen resolution similar to what I have now... portable, so < 16" but = 14" I realize that FlexView isn't available anymore, but I'd like to avoid a glossy screen if possible. decent (not more) graphics performance, ideally hybrid (I'm doing a lot of CAD, never games). good keyboard reasonable CPU -- but I'm still fine with my current Core 2 Duo, so that shouldn't be too complicated. The T60p fits all those requirements, except the 8GB of RAM. Can you help me find a current notebook that would match most of them? I don't mind changing brand. Thanks!

  Read the article

• Grub Setup(hd0) Error Cannot mount selected partition

  - by MA1

  I have created a NTFS Partition(/dev/sda3) and copy the grub files in it in the following path: /dev/sda3/boot/grub/ then tried to install the grub by using following commands: grub root (hd0,2) Filesystem unknown, partition type 0x7 grub setup (hd0) Error : cannot mount selected partition The partition is present and i created it with gparted. i also tried the following command: find (hd0,2)/boot/grub/stage1 Error 15: File not found All the files were there as copied them. So, where is the problem and what i am doing wrong?

  Read the article

• Virtual Hard Drive not booting - VMWare

  - by Chloraphil

  I have a .vmdk (VMWare hard disk) file that I cannot use as the lone disk in a new virtual machine. If I attach it to an existing virtual machine then it works fine. It has Windows Server 2003 on it. When I attempt to boot the new VM it attempts a network boot. EDIT: VMWare Workstation 6.5 I could not find a PXE option in the settings, and I did look in the VM config file for "PXE" but did not find one.

  Read the article

• How to monitor IO svctm with every 5 mins frequency using nagios?

  - by sabya

  I want to collect samples of iostat's svctm, await every 5 mins from all of my servers and store them in nagios. I want to get the values for what is happening in every 5 minutes (not since boot time, iostat's first output gives values since boot time). How can I do it in nagios? EDIT The tps should NOT be calculated #of transactions happened since reboot divided by uptime. What I want is # of transferred happened in last X mins divided X*60.

  Read the article

• Data recovery for Mac

  - by josh3736

  I've got a Mac that won't boot and I'd like to recover whatever data I can before wiping the hard drive and reinstalling. I'm looking for something similar to TRK (which is Windows-centric) — boot from CD, mount the hard drive, and copy to a network share. I just noticed TRK does appear to support HFS+; has anyone had success with this?

  Read the article

• Chameleon 2 RC4 with some more kexts

  - by user36912

  My Lan is working when i am booting from Empire EFI boot CD, but its not working when i am booting from Chameleon 2 RC4. How can i add kext from EFI boot CD to Chameleon? so that chameleon also can auto load the kext necessary for LAN to work. Chameleon 2 RC is installed on my Partition.

  Read the article

• FreeBSD with 64 CPUs

  - by Brett

  I have a quad socket octo-core system running FreeBSD. Currently, I need to turn off HyperThreading to get it to boot, as FreeBSD only supports 32 CPUs. There were some patches made awhile ago against a trunk version of 8.1, but even after modifying them slightly to work and compile with 8.1-RELEASE, the machine wouldn't boot. Has there been any progress here? I can't find much good information about it, Google thinks I'm talking about 64-bit architecture and not literally 64 CPUs.

  Read the article

• What's the reason to break HDD to few partitions for MDADM+LVM2?

  - by archer

  I'm using 2 HDDs each 1TB in size. I'm going to create MDADM+LVM2 over them. Initially I though about this partition layout: /dev/sda1 - 1Gb (boot) /dev/sda2 - 500Gb (md0) /dev/sda3 - 499Gb (md1) /dev/sdb1 - 1Gb (boot) /dev/sdb2 - 500Gb (md0) /dev/sdb3 - 499Gb (md1) md0 is going to be raid0 and md1 is going to be raid1 however, I found some info that this would be better to break each drive to more partitions (lets say 10 partitions 100Gb in size each). What's the reason of doing that?

  Read the article

• Access to MediaShield RAID utility

  - by Serg

  I'm using RAID-1 configuration on a PC which will be accessible by many people who are not very experienced with computers. So I'd want to restrict access to MediaShield RAID configuration utility with pops-up on every boot proposing to press F10 button. Is there a way to hide that boot message or protect the utility with a password?

  Read the article

• Win 7 Remote Desktop connection failure when already logged in.

  - by Andy E

  I have a bit of a strange problem, magnified recently by my broadband dropouts. I wasn't sure whether to post this on SU or SF, so I thought I'd start here as more users would be likely to know what the problem is. In short, when I try and connect to my server (Windows Server 2008) from my laptop running Windows 7, I can only connect if my remote account was previously logged out. If I'm still logged in I get the error message: Windows cannot connect to the remote server. No explanation or anything. If my IP address is the same, I don't have this problem. If I boot up Windows XP Mode and run XP's remote desktop connection it works just fine -- I think the difference there is it takes me to the remote server's logon screen. With Win 7 RDC you never see the logon screen, it asks you for credentials before entering full screen mode. The real problem is that I'm having random broadband dropouts and my IP isn't static. If I logon via Win XP RDC, log out and then run Win 7 RDC then it works fine. I realize I can just use Win XP's RDC for now, but I don't really like keeping XP Mode open if I can help it. Does anyone know a way around this problem? Maybe forcing Win 7 RDC to go to the logon screen, or changing some server-side settings to work around the IP address issue?

  Read the article

• Get extra hard drive space from windows 7

  - by abhinole

  I am using Ubuntu 12.04 and Windows 7 (dual-boot) on my laptop.For some reasons I want some more space in my Ubuntu partition.I have installed gParted in Ubuntu.Now is it recommended to get this required extra space from Windows 7 drive (*where my linux is installed *) directly using gParted? Will it cause damage to my boot loader or my data on the partition from where I wish to grab some space? Any help will be appreciated. Thanks in advance.

  Read the article

• After RAID failure SBS 2008 issues logging in and Exchange store does not mount

  - by Josh R

  today has been one of those days. Yesterday a hard drive in our Dell Poweredge 2900 server failed and the RAID array didn't degrade gracefully, so I called Dell (Server still under warranty) and got an engineer to work though the RAID issues with me. He was a nice guy but didn't do too much. We tried to put the RAID in a state where it was bootable and even though we only lost one disk there are still issues with the server. Once we got the server to boot there was an error message saying that the logonui.exe was corrupted and we needed to run chkdsk. I clicked through the error messages and the login screen never came up. So I power cycled the server and it chkdsk automatically but the login screen didn't appear. I tried safe mode, no difference there either. So the issues I am currently having are: 1) The server boots up, the loading windows screen comes up then it dumps me into a black screen where I can only see my mouse cursor. Ctrl+Esc doesn't work Ctrl+Alt+Del doesn't work 2) Some of the services come up: DHCP, DNS, DFS, and Print come up 3) The exchange information store and transport service don't start - I tried using mmc to connect to services.msc on the computer and start them but they throw an error message of "Can't start because group or dependency failed" Has anyone had a problem like this? Can anyone offer some guidance? Thanks a bunch!

  Read the article

• Windows 8 install fails

  - by HackToHell

  I have the windows 8 release preview 32 bit iso and it fails to install when booted out of a flash drive, it copies the files and the boot loader installs but the install hangs when I boot into Windows 8 the first time, it simply keeps on spinning forever. I did a vhd install of Windows 8 developer preview and it installed fine. Looking at the partition from Windows 7, I can see that the files are present.

  Read the article

• Best windows tool to scan and repair harddisk

  - by ICTdesk.net

  Does anybody know a good software tool to scan and repair sectors on harddisks (an alternative to the standard that is included with windows e.g. scandisk/chkdsk)? I know already about all emergency/ultimate boot cd's, I am looking for a tool that is not on one of the boot-cd's. Thank you, Kindest regards, Marcel

  Read the article

• Diff bios - corrupt video driver

  - by sfonck

  Hi, I'm using an Dell M90 Precision Laptop which has a NVidia Quadro FX 2500M graphics card and is running Windows XP. Laptop has been running fine - but a few weeks ago screen went 'white' - restarted computer- bios and startup screens show weird green dots and stripes, normal startup only shows a black screen... only VGA mode works to display something. I've been trying to remove and reinstall the correct drivers downloaded from Dell's website - no solution. I gave up and reinstalled XP - everything was working perfect again. 2 weeks later - again the white screen - tried everything again (flashin new bios also - nothing works) Reinstalled XP - everyhting was working again, so I made a DriveSnapShot of the partition. Today - again the 'white screen'. Ok, no problem ...I was thinking all I needed to do was to restore the DriveSnapShot backup... Few minutes later the backup is restored ... but guess what: video driver does not work correctly... As the DriveSnapShot restored the complete partition, as it was at the time everything was working perfectly, this would mean my driver problems are due to 'settings' in the bios or on the graphics-card itself + these 'settings' can get overridden by doing a new XP-install.... I'm out of options, can somebody help me to find a solution for this problem: Is there some way to backup and restore a bios after seeing some problems? Is there some way to know what is causing this problem like a bios diff utility? Thanks!

  Read the article

• Is there any benefit to running OSX (Snow Leopard) in 64 bit mode?

  - by jaydles

  I know I can force it to boot into 64-bit kernel by holding down the 6 and 4 keys during the boot process. I also know that some extensions still don't run in 64-bit mode. So the question is what might I gain by running in 64-bit mode? If it matters, I have the brand new 2010 15" MBP with the faster processer and 8GB of RAM.

  Read the article

• zsh : How to list directory content with tab?

  - by Philippe CM

  I just switched from BASH to ZSH and thing are pretty good, but: when I start typing cd /usr/share/s and hit TAB, this is what I get : $ cd /usr/share/sane/ sane/ skype/ ssl-cert/ screen/ smplayer/ strigi/ seed-gtk3/ snmp/ synaptic/ sgml/ software-properties/ system-config-printer/ sgml-base/ soprano/ sysv-rc/ sgml-data/ sounds/ simple-scan/ splashy/ And this is ok. If I then hit TAB again, I get $ cd /usr/share/screen/, the next candidate, witch is also OK. (BTW, how do I cycle back to the previous candidate? Sorry, on to my question) Now what if I want to see the contents of /usr/share/screen/ now ? You now, BASH-style? The cursor is at the end of the line, will I have to ctrl-a (or home), then del del (to erase cd) then ls then ENTER? That seems like a lot of typing. (And it - possibly unnecessarily - enters the command in the history) Would not there be a key (maybe modifier-TAB? but the obvious candidates are already taken by the desktop... I digress) that would tell zsh to stop cycling through /usr/share/ and instead, just list the content /usr/share/screen/ ?

  Read the article

• Why do I need to select the hard disk when my Macbook boots?

  - by Mark

  In the past week when booting my Macbook I have had to select the Macintosh Hard Disk before the boot will continue. It is the only disk to choose from and I have never had to do this before. Is also does not happen on every boot. Any ideas why this would happen?

  Read the article

• Finding a cause of shutdown/sleep

  - by user1188570

  My server running is Linux 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 GNU/Linux. About once a day, sometimes once every two days is shut down - It isn't really shut down, it seems like its sleeping - Power button is blinking, but I cannot boot it by clicking on power or reset button, I must pull electricity out and plug it back in, then I can boot it. What could be the cause of this? How can I fix this?

  Read the article

• Did Adobe Photoshop just killed my Graphics Card for good?

  - by user6004

  I was working with Adobe Photoshop, just some regular work, when I came to edit a PSD file and change the text of some layer, when all of a sudden the PC froze. No mouse, screen is frozen, keyboard strokes aren't getting me anything, no Task Manager, nada. So I rebooted my PC, and then something quite terrifying appeared before my eyes. It was not the Checkdisk utility that was launched, that made me terrified (by the way, that reboot damaged the partition table of an external HDD that was connected at the time to my PC, but that's another story). It was the screen itself. Please have a look. So after Checkdisk finished and Windows loaded, I noticed that the resolution was not right. Instead of 1440x900 which I had set, it was 1280x1024. When I went to change it back, I had no option to change back to my old resolution, and has only 3 other general resolution properties, as if my Video Card (GeForce 8800 GTS btw) was not recognized. And what do you know, in the Device Manager it appeared with an exclamation mark. Inside the hardware, it said this: Windows has stopped this device because it has reported problems. (Code 43) Uninstalling the drivers, downloading the newest drivers from NVIDIA and installing them did not work. It always comes back to this. So, do you have any advice before I go out and buy a new graphics card? I thought this was the only option left, but maybe the experts at Super User can help me out. By the way, the dotted screen appears after every reboot, and I see the dots when the ASUS Motherboard screen shows up at boot. Thanks in advance.

  Read the article

• How to format pendrive from fat32 to ext3 in windows7

  - by newb

  I am trying to make a live usb of OPHCRACK and tried to boot from FAT32 pendrive. But after making live usb and boot from it the ophcrack didnt work. After searching a while i came to understand that ophcrack will not work in a fat32 pendrive and we have to convert it into ext3. But i am getting hard time finding a method or software which can be used to convert fat32 pendrive to ext3 in windows 7. Can you suggest any method or software's for this purpose

  Read the article

• How to use process monitor to view or log a windows login?

  - by leeand00

  We're having some issues with Windows 7 Roaming profiles and I was reading here that the login process can be monitored using process monitor. "There are a couple of ways to configure Process Monitor to record logon operations: one is to use Sysinternals PsExec to launch it in the session 0 so that it survives the logoff and subsequent logon and another is to use the boot logging feature to capture activity from early in the boot, including the logon." How does one do either of these options using process monitor to find out what is happening during a user login?

  Read the article

• Powerpoint not drawing in slide properly...

  - by commradepolski

  So got another issue to post about. I have a user here who uses powerpoint a lot, Office 07 with SP2. When he opens up the presentation, powerpoint opens fine without errors, but does not draw in the main slide properly. So to better explain that, the list on the left hand side, that shows the slides and what order they are in, loads up fine. You can see the slides and the content etc. When you click on a slide, to edit it, it does not draw in on the editing screen. Not really sure how to explain that. The screen where the work on the slide is done, is what is affected. This is a screen shot from my pc not the users. So instead of the screen saying "Click to add title" it would be improperly drawn such that if I were to drag an explorer window across it, it would leave a trail. I have tried reinstalling office, updating it, as well as giving the user a new windows image and nothing has helped. Any help or advice is appreciated.

  Read the article

• Why does my computer restart immediately after I shut it down?

  - by Youri

  After I shut down my computer it automatically starts up again. I've tried re-installing Windows 7 64-bit, resetting my BIOS, installing the newest drivers and also changing the boot and recovery settings. The motherboard I have is a MSI P67A-GD65 (B3), and the processor is a Intel Core i7-2600K. How can I shut down my computer and have it stay off? Also, what is causing it to immediately boot back up?

  Read the article

• Create a primary partition on Windows 7

  - by TutorialPoint

  I have windows 7 installed. On the moment i have the following partitions on 1 hard disk: (300 GB) C: (Windows) (Primary, System, Boot, Page File, Crash Dump, Active) 100 GB D: (Data) (Logical) 100 GB E: (System Reserved created after Boot repair) (primary, system) 100 MB Now i want to create a new primary partition on this disk, because i have +/- 100 GB left, for a new OS. However when trying to make a new partition, it makes it a Logical partition, not Primary. How to make it primary...?

  Read the article

< Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >