Search Results

Search found 13331 results on 534 pages for 'fluent interface'.

Page 308/534 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

• Oracle RAC interconnect in a Dell M1000e Blade Enclosure

  - by Antitribu

  We are looking at a Dell M1000e enclosure and appropriate Blades with 4 NICs each. We are planning on running Linux/Oracle 11g RAC on two blades, storage will be handled on an iSCSI SAN for which two NICs (via passthrough) will be connected leaving us with two NICs (via blade centre switches). We would like to have an interconnect (obviously) , an external IP and an internal IP. Would best practice be to: bond the remaining two interfaces and VLAN as appropriate to provide three virtual interfaces? run the interconnect on one interface and VLAN the external/internal interfaces? purchase a blade with more NICs as the above is a terrible idea? Another option? Please feel free to point out the blindingly obvious or to relevant documentation on support.oracle. I am specifically interested in supported configurations and best practices. Thanks!

  Read the article

• Setup dhcpd without gateway on purpose

  - by MBober

  I have an XP machine with two network interfaces. One is connected to my company's network (and the Internet). The other is a very local network which connects some hardware with my PC. Both the hardware and my XP machine's second network interface obtain configuration from a dhcpd running on Ubuntu in a virtual machine on my XP machine. I entered some dummy gateway in /etc/dhcp3/dhcpd.conf like 192.168.3.1 which does not match any existing device just to get dhcpd started. The problem is that my XP machine now tries to route Internet traffic through 192.168.3.1 in most of the cases which, of course, results in an error. Is there any way to set up dhcpd in a way that the clients know that there is no gateway in this network? By the way: setting the gateway manually in XP is off the table because this needs administrator privileges which I don't have.

  Read the article

• Can I rely on S3 to keep my data secure?

  - by Jamie Hale

  I want to back up sensitive personal data to S3 via an rsync-style interface. I'm currently using s3cmd - a great tool - but it doesn't yet support encrypted syncs. This means that while my data is encrypted (via SSL) during transfer, it's stored on their end unencrypted. I want to know if this is a big deal. The S3 FAQ says "Amazon S3 uses proven cryptographic methods to authenticate users... If you would like extra security, there is no restriction on encrypting your data before storing it in Amazon S3." Why would I like extra security? Is there some way my buckets could be opened to prying eyes without my knowing? Or are they just trying to save you when you accidentally change your ACLs and make your buckets world-readable?

  Read the article

• How do I identify which rewrite rule is being trigger on IIS 7.5?

  - by Jordan Reiter

  I have a set of rewrite rules (offhand, I would say around 40-50) for a given server. It's basically to handle and reroute mangled URLs so that bad links still go to where they're supposed to go. I've come across an URL that is redirecting and I can't figure out which rewrite rule it is applying. My background is Apache and in that case I'd simply enable a rewrite log and look at the logged output to figure out what was happening. Is there an equivalent way to do this in IIS? bonus round Any way for me to view & edit the rewrite rules in a text file rather than the GUI interface?

  Read the article

• Monitoring System for the cloud?

  - by Maxim Veksler

  I need a monitoring system, much like ganglia / nagios that is build for the cloud. I need it to support : Adding / removing nodes dynamically. (Node shuts down, dose not imply node failure...) Dynamic node based categorization, meaning node can identify them self as being part of group X (ganglia gets this almost right, but lacks the dynamic part...) Does not require multicast support (generally not allowed in cloud based setups) Plugins for recent cool stuff such as Hadoop, Cassandra, Mongo would be cool. More features include: External API, web interface and co. I've looked at Ganglia, munin and they both seem be almost there (but not exactly). I would also go for reasonably priced Software as Service solution. I'm currently doing research, so Suggestions are highly appreciated. Thank you, Maxim

  Read the article

• Tiny linux box with 2xGbLAN, WLAN and 10MB/s AES throughput?

  - by Nakedible

  I'd like to find a small linux box with the following specifications: Small (mini-ITX size is OK) Fanless Runs Debian At least two gigabit network interfaces WLAN that supports "host ap" with hostapd + mac80211 in AP mode Can encrypt AES at least 10 megabytes per second Total cost $300 or less Solutions from multiple parts also accepted - I can buy an external network card etc. and build the box myself if the components are available. If you don't know about the "host ap" thing, just suggest your solution, I'll find out if I can get that resolved. If I can't get all that, I can possibly skip the "runs Debian" part, and I can definitely skip the hostapd part if the box can be a wireless access point with multiple ESSIDs out of the box. Something like Asus RT-N16 is close - doesn't run Debian easily, and probably doesn't encrypt AES fast enough. Something like Zotac ZBOX HD-ID11 is also close - no idea which WLAN card it has and it lacks second gigabit interface, but otherwise nice.

  Read the article

• Cannot import video from a DV camcorder over FireWire

  - by qbeuek

  I have a JVC GR-D320 miniDV camcorder that has a FireWire interface. I recently upgraded to Windows 7 RTM (64 bit, fresh installation). When I connect my camcorder through FireWire, I can see it in Device Manager without any warnings or problems, but I cannot capture videos from my miniDV tapes. After connecting, AutoPlay displays "Import Video could not find a compatible digital video device. Verify that the digital video device is properly connected and turned on." When using Windows Live Photo Gallery after selecting the import option, my camera is not listed. The camera used to work perfectly on the same hardware before upgrading to Windows 7 RTM 64 bit (it used to work fine on Windows XP SP3 32 bit). Googleing revealed that people had the exact same problems in Vista, but no solution was provided. Any help?

  Read the article

• "MAS SMS-CDMA" Bluetooth service

  - by TuxRug

  I have my phone (LG Rumor Touch on Sprint) connected to my Windows 7 computer by Bluetooth. Usually, one of the services is unidentified and no driver is installed. Occasionally I have an issue that is solved by removing and re-pairing my phone with my computer. The last few times I have paired my computer and phone, the unidentified service was found and installed, as "MAS SMS-CDMA". It sounds like an interface that allows sending and reading SMS messages via Bluetooth. However, there is no software available from Sprint or LG that I have found that offers such functionality. Searching Google for "MAS SMS-CMDA" (with quotes) did not provide anything useful, only what appear to be CMDA information written in Spanish. What can I use this service for, and how do I use it?

  Read the article

• WINEHQ - wine_gecko won't init - HTML Rendering disabled

  - by Nick

  Hello Super Users, I'm currently trying to get a windows compiled program to work through Wine to run on Linux and MacOSX. When I run the program through wine, it prompts me to install Gecko which I do. Later on in the program, it attempts to use MSHTML to render HTML but I get these error messages on my console instead. err:mshtml:init_xpcom NS_InitXPCOM2 failed: 80004005 err:mshtml:HTMLDocument_Create Failed to init Gecko, returning CLASS_E_CLASSNOTAVAILABLE fixme:ole:CoCreateInstance no instance created for interface {00000000-0000-0000-c000-000000000046} of class {25336920-03f9-11cf-8fd0-00aa00686f13}, hres is 0x80040111 I'm using Wine 1.1.34 and a similar bug was supposedly fixed in 1.1.33 http://bugs.winehq.org/show_bug.cgi?id=12578 I've been at this all afternoon, is there anything I'm missing? Thanks, Nick

  Read the article

• KVM Virtual guest Paused on Reboot

  - by David Hamilton

  I'm running REHL 6 and just installed a Ubuntu Server Guest via KVM set to start at boot. This works correctly and the guest loads, but it loads "paused" and requires that I manually un-pause it. Can someone give me a hint as to how I can I get the Guest OS to actually become active on boot? Here is the libvert dump as requested...Also tried libvert auto-start --- no effect. <domain type='kvm' id='1'> <name>MailServer</name> <uuid>a61dae75-1f5c-d536-718f-3c615d9b4868</uuid> <memory>4194304</memory> <currentMemory>4194304</currentMemory> <vcpu>4</vcpu> <os> <type arch='x86_64' machine='rhel6.0.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/home/MailServer/MailServer-1.img'/> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <alias name='ide0-1-0'/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:cd:f9:9f'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes'/> <sound model='ac97'> <alias name='sound0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='selinux'> <label>system_u:system_r:svirt_t:s0:c211,c271</label> <imagelabel>system_u:object_r:svirt_image_t:s0:c211,c271</imagelabel> </seclabel></domain>

  Read the article

• Would Firefox 3.5.8 freezing on Windows 7 indicate a problem with Windows WiFi driver or with Firefo

  - by Krystof

  I recently installed Windows 7 in spite of a lack of driver support from my laptop manufacturer but somehow Windows 7 seemed to be able to figure out what was needed - including the WiFi driver. But after I installed Firefox 3.5.8, I found that Firefox freezes frequently. When this happens the whole Windows interface turns sort of whitish like it's disabling interaction and, indeed, you cannot interact with anything in Windows. After a few minutes the freeze resolves itself and everything returns to normal. I scanned for viruses and ran the defragenter but nothing seems unusual besides these freezes. Anyone have any ideas what might be causing it and whether it's likely a problem with Firefox or with Windows - or perhaps with the hardware or drivers (WiFi driver?)?

  Read the article

• Using a MiFi via WDS

  - by Joril

  I have a Huawei R201 MiFi connected to the internet, and I'd like to use its internet connection even from devices that don't have WiFi, so I grabbed a wireless router I had lying around and configured WDS so that it'd connect to the MiFi, and this is working nicely (I can ping the MiFi from the router web interface). The next step was connecting my PC to the router via ethernet cable, but now I'm stuck... The PC can ping the router, but not the MiFi (they're all on the same subnet). Since the router can ping the MiFi, I guess this is some kind of routing issue? Should I get a more "flexible" router, such as one with DD-WRT maybe? Is what I'm trying to do even possible? (For the record the PC is running Lubuntu 11.10)

  Read the article

• Cannot assign port 4 to WAN on TP-Link WR740N by DD-WRT wiki

  - by Victor Sergienko

  I'm following the DD-WRT instruction to get TP-Link WR740N v3's Port 4 on a different VLAN, but this doesn't happen. First, I have no "Setup VLANs" settinngs tab in DD-WRT v24-sp2 (07/20/12) std r19519. I can get Internet on Wi-Fi if assigning eth1 to "WAN Port", but then all Ethernet ports get on the same VLAN and any wired connection grabs the DHCP address and Internet connection from router. When following the "old" instruction, if I run, say, nvram set vlan2ports="2 5*", should there appear a new interface, vlan2, in ifconfig, after ifconfig vlan2 up? It doesn't - does it mean there is no support for different VLANs in my software/hardware? What am I missing? Is it impossible to create more VLANs on TP-Link740?

  Read the article

• VMWare Host needing ESXi 5.0 - Running on a 2008 R2 Host?

  - by Great Big Al

  I have a VMWare image supplied by my Phone System provider which manages a contact management interface, they tell me that VMWare EsXi5.0 is the highest supported host. I'm used to MS HyperV and have no VMWare experiance. At present I have this guest running on a simple desktop PC running ESXi5.0.0, I'd idealy like to run this guest (it's Windows 7 with their software already installed and configured) on a Windows 2008R2 server I have available, as I said, I'm used to HyperV and I can't easily identify if there is a version of VMWare that supports ESXi5.0 guests that will run on a Windows 2008 R2 server host. Is there such a product, what's it called, and with one guest can I run it without purchasing a license? Thanks

  Read the article

• How to fill in the network line in the ubuntu interfaces config file?

  - by matnagel

  I have to configure an ubuntu hardy server network interface. The service hoster told me that this is the network data for the machine: IP Range: 111.111.200.74 to 111.111.200.78 Netmask: 255.255.255.248 Broadcast: 111.111.200.79 Gateway: 111.111.200.73 Subnet: 111.111.200.72/29 I am only using the first IP address. I will update the /etc/hosts file with 111.111.200.74, but I am still unsure how the /etc/network/interfaces file should be. This is my plan: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 111.111.200.74 netmask 255.255.255.248 network 111.111.200.??? broadcast 111.111.200.79 gateway 111.111.200.73 As you can see I don't know how to build the network line. How would I calculate the data for the network line and what is the result? (I changed the first 2 octets of the subnet, they are not "111.111" in the real setup.)

  Read the article

• Teredo - how to connect to host behind NAT?

  - by Signum

  All I want to achieve is to establish connection to my simple server (written in C# using TcpListener class, if it makes any difference), on my computer which is behind NAT. It has some IPv6 address (it's public IP, starting with 2001:0) on Teredo interface. However, I cannot even ping it from outside my network, for instance I'm trying to ping this address from this website http://mebsd.com/ipv6-ping-and-traceroute, result - 100% packet loss. As I understood from reading about Teredo, there is no need for some port forwarding? So where could be the problem?

  Read the article

• How can I install OpenSolaris without Graphical Environment - just text console?

  - by Sanoj

  I would like to install OpenSolaris and use it as a home-server. I will interact with it just with SSH, so I don't need the Graphical Environment. How can I install OpenSolaris without the Graphical Environment? And preferably I would like to use the SSH-interface as much as possible, is it even possible to do the installation over SSH? I tried the SSH-boot alternative on the installation-CD, then I have to use a password, but I have no password since I haven't installed the system yet.

  Read the article

• In what way does non-"full n-key rollover" hinder fast typists?

  - by Michael Kjörling

  Wikipedia claims (although the latter claim does not cite a source) that: High-end keyboards that provide full n-key rollover typically do so via a PS/2 interface as the USB mode most often used by operating systems has a maximum of only six keys plus modifiers that can be pressed at the same time.[4] This hinders fast typists, ... In what way would the system being able to recognize only six non-modifier keys at once hinder a fast typist? I consider myself a relatively fast typist and I usually press one key, plus modifiers, at once; I can't imagine any real-life situation in which the system only recognizing six non-modifier keys being pressed at once has been a limiting factor in my keyboard usage. (Multi-stroke keyboard shortcuts as used by high-end software like Visual Studio, Emacs and the like are a different matter.) Note that I am not really interested in answers centered around multiplayer computer games; I'm looking for answers that give reasons that would be relevant to typists, somehow supporting the statement made on Wikipedia.

  Read the article

• Windows 7 Utlimate x64 - No Internet access

  - by rafek

  I've just installed Windows 7 Ultimate x64. As all of my computers at home I've connected to my router via wifi (open/wep). And what has happened is that Wireless Connection is Connected but with No Internet access -- my ipconfig says: Autoconfiguration IPv4 Address : 169.254.33.161 Subnet Mask : 255.255.0.0 Default Gatewawy : (empty) After ipconfig /renew I get: An error occurred while renewing interface Wireless Network Connection : unable to contact your DHCP server. Request has timed out. [..] I'm looking for a solution for 2 hours now...

  Read the article

• How to set up wireless access on a Cisco router

  - by Carlos

  Hi, I've set up my 877W according to the configuration listed in this forum post: IPTV over Cisco 877 (It's the working configuration at the bottom of the post) Note that I have an 877W, so it also has a wireless radio. Now, I've gotten the whole setup to work, so IPTV is working, and I can access the internet via the ethernet ports. Now I'm trying to figure out how to allow access via the dot11radio interface. I've gathered that I basically need to create a bridge group, and bridge the radio to the internet VLAN. However, when I add a bridge-group 2 command to VLAN1, it seems to take down the whole internet VLAN. (The IPTV continues to work.) This makes the router itself inaccessible (I've got a laptop, so no serial) and I end up having to reboot the router. Can anyone tell me how to a) Allow wireless access to the internet (preferably with WEP, to match my old router) b) Determine what makes the router inaccessible when I add the new bridge group c) Forward the IPTV traffic onto a machine on my internet VLAN

  Read the article

• Juniper SRX1400 VPN

  - by ank

  I have been trying to set up a client VPN on a Juniper SRX1400 without much success. All documentation I found from Juniper and elsewhere does a lot of other (difficult and wonderful) things other than the simple things I want to do. We already have a VPN running on CISCO PIX hardware which we need to put to rest and we pretty much like to replicate the functionality, which is: 1) client makes a request to the outside interface of the SRX1400, 2) client gets authenticated, 3) if successful, then client is assigned all the usual DHCP stuff and becomes part of the network. What privileges this DHCP assigned network has, should be configurable of course with the usual routing/filtering methods. Am I asking for too much from the SRX for this kind of thing? Should I ditch the SRX for VPN and revert to an OpenVPN solution that I had working some time back also and was amazed at the ease of configuration, functionality and features?

  Read the article

• How can I limit the upload/download bandwidth on my CentOS server?

  - by Dan Nestor

  How can I limit the upload and download bandwidth on my CentOS server? This is a box with a single interface, eth0. Ideally, I would like a command-line solution (I've been trying to use tc), something that I could easily switch on and off in a script. So far I've been trying to do something like tc filter add dev eth0 protocol ip prio 50 u32 police rate 100kbit burst 10240 drop but I'm obviously missing a lot of knowledge and information. Can somebody help with a quick one-liner? Many thanks, Dan

  Read the article

• WLAN LED randomly blinking when there is no traffic

  - by mrc

  Hi, I've got a Linksys WUSB54GC WLAN USB interface (Ralink chipset) and I'm running Debian GNU/Linux 6.0. The LED very often randomly blinks although there is no traffic in the network. I checked this with Wireshark. Sometimes, but rarely, the LED stops blinking. The issue is present in Ubuntu and Fedora too. It was not present in Debian Lenny with Linux 2.6.28. I checked an old live cd with ubuntu 8.10 with kernel 2.6.27 and it was also OK. So I guess that's an issue with Linux kernel and its wireless driver or firmware. Has anybody observed a similar thing? Does anybody know how to help this annoying blinking? Thanks.

  Read the article

• Apache doesn't autostart because vpn isn't up yet.

  - by Col. Shrapnel

  I have a FreeBSD8 server, and VPN connection to my ISP. I use mpd5 and it works fine. A have an Apache server whch works fine, if I start it manually, after VPN is get up. But when I add it to rc.conf autostart, it fail to start, saying (49) can't assign requested address: make_sock could not bind to address I suppose it's because VPN isn't up yet and no IP address assigned to the interface which i set in the Listen directive in the httpd.conf. If i set Listen to the existing 127.0.0.1, it fail to serve wan requests. Is there a solution, either to delay apache autostart or configure it some different?

  Read the article

• OpenBSD ftp-proxy behind NAT itself

  - by Manuel Faux

  Is it possible to change the PASV IP ftp-proxy of OpenBSD sends to clients, without changing the listen address of redirection control (-b <address>)? I have the following setup: FTP client --> 1:1 NAT router --> OpenBSD router --> FTP server The 1:1 NAT router has a NAT rule to forward everything to the OpenBSD router, the OpenBSD router runs the ftp-proxy -R <FTP server IP>. When the FTP client sends the PASV command, the proxy answers with the Entering Passive Mode (227) message with his own source IP on the interface to the 1:1 NAT router (obviously). Since the 1:1 NAT router is not protocol aware, it forwards this message and the client receives the message with the PASV IP of the OpenBSD router, which it does not have a route to. Is there a way, that I can tell ftp-proxy to send the Entering Passive Mode message with a different source IP?

  Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >