Search Results

Search found 13082 results on 524 pages for 'ip camera'.

Page 308/524 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• How would you secure a home router with a self-signed certificate?

  - by jldugger

  littleblackbox is publishing "private keys" that are accessible on publicly available firmwares. Debian calls these "snake-oil" certs. Most of these routers are securing their HTTPS certs with these, and as I think about it, I've never seen one of these internal admin websites with certs that wasn't self signed. Given a webserver on IP 192.168.1.1, how do you secure it to the point that Firefox doesn't offer warnings (and is still secured)?

  Read the article

• How would you secure a home router with a self-signed certificate?

  - by jldugger

  littleblackbox is publishing "private keys" that are accessible on publicly available firmwares. Debian calls these "snake-oil" certs. Most of these routers are securing their HTTPS certs with these, and as I think about it, I've never seen one of these internal admin websites with certs that wasn't self signed. Given a webserver on IP 192.168.1.1, how do you secure it to the point that Firefox doesn't offer warnings (and is still secured)?

  Read the article

• Primary/secondary ethernet interfaces via NetworkManager in Ubuntu 9.10

  - by Josh

  I have an Ubuntu 9.10 machine with three ethernet interfaces, eth0, eth1 and eth2. eth2 is connected to a private network. eth0 and eth2 are connected to two different LANs. Either one will provide access to the internet. All three networks have DHCP servers. Using Ubuntu's the default settings (And Gnome), when I boot up all the interfaces are active and my system gets three IP addresses. However any attempt to access the internet results in connection timeouts and other weirdness. I suspect that traffic is going out on one NIC (like eth0) and coming back in on another (like eth1). I'm not sure what's going on. The only way I can access the internet at the moment is to bring two of the devices down with ifdown. How can I configure eth0 as my primary interface so all trafic goes out by default on that interface, while keeping the other two active? Also, I want to make sure Avahi broadcasts properly on all three IPs so that the computers on the LAN of eth1 can still connect to myHostname.local... EDIT: Here's my routing table: Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 172.16.151.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 172.16.30.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.1.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 172.16.30.2 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.1.0.1 0.0.0.0 UG 0 0 0 eth1 I want the 172.16.30.2 network to be the primary one and the 10.1.0.0 network to be the secondary one. EDIT2: My nameservers are also incorrect. It seems like Ubuntu is bringing the networks up in order, eth0, then 1, then 2, and the DHCP information from eth1 is overriding eth0, and eth2 is overriding eth1. How can I reverse this so the DHCP information from eth0 is the "master"? EDIT3: This seems to be an issue with Gnome's NetworkManager.

  Read the article

• How to access my local server on my VirtualBox virtual machine?

  - by marcgg

  Here's my setup: I have a local server running on my machine (Mac OS, Snow Leopard). I can access it via my browser by doing localhost:3000 I have a virtual machine using Virtual Box running a windows XP. If I try to access using localhost:3000, it fails. Same thing if I use the ip of the Mac machine. The virtual machine has access to the internet. How can I access my local server in my virtual machine?

  Read the article

• xampp - can access control panel, cannot access projects/sites on local network

  - by Peter O.

  I've configured xampp and firewall so I can access desktop pc's localhost over my local network through desktop pc's IP. But I'm not able to access auctual projects: I can access: http://192.168.x.x/xampp or http://192.168.x.x/phpMyAdmin But I cannot access: http://192.168.x.x/myWebsite/ I get an error: Server error We're sorry! The server encountered an internal error and was unable to complete your request. Please try again later. error 500

  Read the article

• snmpd.conf network range not accepted

  - by Stefan

  I am using snmpd on CentOS 6.3 and was giving a network range to the source for mapping community to security group. com2sec mynetwork 192.168.0.0/23 centreon Anyhow it is not working and I always get a timeout from the polling server. When I enter the exact ip of the polling server it works (192.168.3.180) It even works if I enter the whole netmask (255.255.252.0) Anyhow it should work according to documentation. Did I do anything wrong?

  Read the article

• Using cURL through SSH tunnel or VPN

  - by Andrew

  Hello, I would like to set my CURL to use SSH tunneling for certain domains. How can I accomplish that? I can also set up VPN or SOCKS or whatever, but I need to use CURL on local machine, but use the IP of remote machine for those connections.

  Read the article

• how to have a vm image act as a server host

  - by tipu

  I have a VM Ware player, VMware-player-3.0.1-227600.exe I downloaded a cent os image, it's version is CentOS release 5.4 (Final) I have apache installed and listening on port 8080. However when I visit my ip address, x.x.x.x.:8080/ I don't get the default apache page as I would by going to localhost:8080/ What do I have to do in my image or vmware to get it to serve?

  Read the article

• OS X Server not showing in Windows Vista Shared

  - by Mirage

  I have OS X Server installed. I am using Window Vista on a PC. But on my network I can't see the OS X server. But I can see other Mac computers in shared but not OS X server. I am able to ping the IP. What should I do?

  Read the article

• Can't change picture import settings in Windows 7

  - by Joel in Gö

  I have foolishly set the picture import settings wrongly for when a camera card is put in my computer. It correctly asks me whether I would like to import the pictures using Windows picture import, and when I click on this option it flashes up the "import pictures" dialog very briefly, and then immediately gets on with importing the pictures to the wrong place. I simply want to click on the "import settings" link on the dialog - but it's too quick for me, and even if I do manage it it just ignores me. Windows Help, useful as ever, tells me to click on the link :) Any ideas? Thanks!

  Read the article

• Is it possible to add wildcard serveralias to virtualhost without modifying httpd.conf manually?

  - by Favourite Chigozie Onwuemene

  Is it possible to add wildcard serveralias (example: *.somesite.com) in an apache server without modifying httpd.conf manually? I use a DNS different from my hosting server and i have added asterisk A record to my DNS to point all request like (test.somesite.com,test2.somesite.com) to my hosting servers IP, but i don't see anyway of adding asterisk serveraliases to apache httpd.conf file in my cpanel. Pls is there a solution?

  Read the article

• Tools for Remote Desktop with Relay feature

  - by Stan

  Is there good tool that can do same thing as windows 'mstsc' and also has some features, like save different session info, so don't need to remember difference IP/ID/pwd. Thanks. EDIT: Since I can't directly RDP to remote hosts, instead, I have to RDP to a terminal server and RDP from their to my destination. Is there client that can relay my connection from local and pass through the terminal to the real destination?

  Read the article

• How do I ssh into my linux machine at home?

  - by Alex

  It's a dell ubuntu. But I don't know why I can't do: [email protected] which is my local-ip.

  Read the article

• Changing MAC address on the Fly on old kernel 2.6.x

  - by shaiss

  I'm doing some research on old kernels and running the following on 2.6.7 or 2.6.8 gives a resource busy error. But on 2.6.28 the command works as expected. How would I determine which kernel allowed this command to change the mac address on the fly? ip link set dev addr You can see some screenshots below. Thank you!

  Read the article

• 404 when doing safe-upgrade in lucid 64 box?

  - by Millisami

  Why I see 404 when doing sudo aptitude safe-upgrade in my lucid 64 box? deploy@li167-251:~$ sudo aptitude safe-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done The following packages will be upgraded: apache2 apache2-mpm-prefork apache2-threaded-dev apache2-utils apache2.2-bin apache2.2-common apt apt-utils base-files binutils bzip2 dpkg dpkg-dev gzip ifupdown krb5-multidev language-pack-en language-pack-en-base language-selector-common libatk1.0-0 libatk1.0-dev libavahi-client3 libavahi-common-data libavahi-common3 libbz2-1.0 libc-bin libc-dev-bin libc6 libc6-dev libc6-i686 libcups2 libfreetype6 libfreetype6-dev libglib2.0-0 libglib2.0-dev libgssapi-krb5-2 libgssrpc4 libgtk2.0-0 libgtk2.0-common libgtk2.0-dev libk5crypto3 libkadm5clnt-mit7 libkadm5srv-mit7 libkdb5-4 libkrb5-3 libkrb5-dev libkrb5support0 libldap-2.4-2 libldap2-dev libmysqlclient-dev libmysqlclient16 libnotify-dev libnotify1 libpam-modules libpam-runtime libpam0g libparted0debian1 libpng12-0 libpng12-dev libpq-dev libpq5 libssl-dev libssl0.9.8 libtiff4 libudev0 libusb-0.1-4 linux-libc-dev mountall mysql-client mysql-client-5.1 mysql-client-core-5.1 mysql-common mysql-server mysql-server-5.1 mysql-server-core-5.1 openssh-client openssh-server openssl parted python-apt sudo tzdata udev upstart ureadahead wget xulrunner-1.9.2 xulrunner-1.9.2-dev The following packages are RECOMMENDED but will NOT be installed: colibri debhelper fakeroot hicolor-icon-theme libatk1.0-data libglib2.0-data libgtk2.0-bin libhtml-template-perl manpages-dev notification-daemon notify-osd ssl-cert xauth xfce4-notifyd 88 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 85.8MB of archives. After unpacking 1712kB will be used. Do you want to continue? [Y/n/?] y Writing extended state information... Done Get:1 http://security.ubuntu.com/ubuntu/ lucid-updates/main libpam-modules 1.1.1-2ubuntu5 [358kB] Get:2 http://security.ubuntu.com/ubuntu/ lucid-updates/main base-files 5.0.0ubuntu20.10.04.2 [70.2kB] Get:3 http://security.ubuntu.com/ubuntu/ lucid-updates/main gzip 1.3.12-9ubuntu1.1 [102kB] Err http://security.ubuntu.com/ubuntu/ lucid-updates/main libc-bin 2.11.1-0ubuntu7.2 404 Not Found [IP: 91.189.88.37 80] Err http://security.ubuntu.com/ubuntu/ lucid-updates/main libc6 2.11.1-0ubuntu7.2 404 Not Found [IP: 91.189.88.37 80] Err http://security.ubuntu.com/ubuntu/ lucid-updates/main libc6-i686 2.11.1-0ubuntu7.2 .........

  Read the article

• Determine the percentage of a file that has been ftp'd from client to server

  - by klwillie

  I want to ftp a large file from a Windows client to a Windows server, using their IP addresses. This is on an internet independent network. While the file is transferring, I would like to determine how many bytes have been received by the server. I then would like to use this information to determine in real-time the percentage of the file that has been transferred to the server. Any recommendations as to the ftp command syntax and C# code to achieve this?

  Read the article

• How to direct outgoing traffic through specific interface?

  - by user1434058

  I added eth1 and eth2 to my Ubuntu Server, all 3 use DHCP and are on the same lan eth0 10.0.0.41 eth1 10.0.0.42 eth3 10.0.0.43 Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default router.net 0.0.0.0 UG 100 0 0 eth0 10.0.0.0 * 255.255.255.0 U 0 0 0 eth0 10.0.0.0 * 255.255.255.0 U 0 0 0 eth1 10.0.0.0 * 255.255.255.0 U 0 0 0 eth2 curl --interface eth1 www.google.com doesn't work what else do i need to do for the above to work?

  Read the article

• How to prevent Windows from doing this

  - by Murtaza

  I am using Windows 7 Professional 64bit. This is my webcam. It is first time using this webcam in my pc. It's name is A4tech - PK-331F. When I plugged that webcam, windows start installing drivers automatically but unfortunately it installed wrong drivers. The drivers Windows 7 installed are Vimicro USB 2.0 PC Camera (Venus) and these drivers aren't related to this webcam. Now I did some modifications to windows so it isn't installing drivers automatically but whenever I plug that webcam but same name of drivers and doesn't install it. I think because of it, I can't install it's original drivers. I don't want Windows recognize this webcam with this name. How can I prevent Windows from doing this?.

  Read the article

• default virtual network interface

  - by Zulakis

  I got a single ethernet connection to a network but need multiple ips. Because of this, I am using virtual network interfaces like this: auto intern iface intern inet static address ... netmask ... gateway ...U auto intern:1 iface intern:1 inet static address ... netmask ... gateway ... I need to specify which IP should be used by default for outgoing traffic. How can I do that?

  Read the article

• iptables intercept local traffic

  - by Anonymous

  i hope someone can help me out with somewhat simple task. I'm trying to redirect a client in my router through my desktop PC, so i can dump the traffic and analyze it (its potential source of poisoning the network with malicious packets). However i don't have a second NIC on my hands and i was hoping i can redirect all the traffic from that IP through my PC. In essence to become MITM for the client. Does anyone have any idea where to start: Current state: (localip)-(router)-(internet) And what i want to do: (localip)-(pc)-(router)-(internet)

  Read the article

• Home movie video browser

  - by Jim Hunziker

  I have a bunch of home movies that don't have useful filenames because they came straight off the camera. (I'm using Vista 64, by the way.) Picasa is pretty good for browsing through them and watching them, but it doesn't use my video card for rendering the videos. My CPU gets pegged at max usage, and full screen barely works. Windows Media Player or Quicktime works fine. Is there another application (like Picasa) that can be used for browsing through movies that both uses my video card and shows thumbnails of all the movies in my collection? I'd rather have something nicer than Windows Explorer. (The movies are h.264 AAC 1280x720.)

  Read the article

• How to prevent HP Photosmart Essential from launching on removal drive insertion

  - by David Boike

  My in-laws bought an HP computer loaded with HP junk, and it's giving me a headache. When they insert a camera memory card into their printer, the Auto-Play dialog comes up, but it also launches the HP Photosmart Essential application, which is a piece of trash. It will NOT launch properly just normally from the taskbar, so that makes it pretty useless. I tried uninstalling it, but then when you insert a memory card, a Microsoft Help window comes up saying how to reinstall HP Photosmart Essential!! Is there any way to find the registry key (I assume) that allows a program to be launched when a memory card is inserted?

  Read the article

• Computer name not appearing on network

  - by stib

  I can connect to other computers on my home network (ubuntu + OSX machines) using the IP address, but I can't connect using the netbios name. On the mac the name appears in Finder but if I try to connect (goconnect to server smb://[email protected]) it doesn't work, while smb://[email protected] does. Same with ssh, ping and afp between the macs. This is a intermittent problem. It has worked in the past.

  Read the article

• linux multipath routing load balance

  - by user52883

  I would like to know how to load balance two Business DLS links which have fixed IPs. I believe it would look something like this: ip route add default scope global \ nexthop via gatewayDLS1 dev interface1 weight 1 \ nexthop via gatewayDLS2 dev interface2 weight 1 Is this be all I need in order to get multipath routing? Please, give me a more detailed answer if possible, thanks you.

  Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >