Search Results

Search found 10033 results on 402 pages for 'fuzz testing'.

Page 310/402 | < Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >

• Prevent Linux from processing incoming ICMP Host unreachable packets

  - by bbc

  I have a test setup with one host on a network (10.1.0.0/16) talking via TCP to another one on another network (10.2.0.0/16) and a gateway in the middle. Sometimes, the TCP connection is lost and while scanning the trace (pcap), I looks like it's because of just one ICMP Host unreachable message sent by the gateway to 10.1.0.1 at some point. 10.1.0.1 then sends a TCP RST to 10.2.0.1. In my opinion, the gateway (pfSense) is broken or not configured correctly but anyway, for testing purposes, I'd like to block this kind of ICMP on the host (10.1.0.1) before it has an influence on my TCP connection (or does it? I'm not even sure). I've tried iptables: iptables -I INPUT -i eth0 -p icmp --icmp-type host-unreachable -j DROP but while it does a good job at preventing userpace applications like ping from receiving these ICMP messages, my TCP connection still comes to an end when the alleged "killer ICMP packet" is sent by the gateway. Am I right about how it is processed? If yes, then what can I do to achieve my goal?

  Read the article

• Mysql server high trafic makes websites really slow or unable to load

  - by Holapress

  Lately we have been having a lot of problems with our mysql server, from websites being really slow or even unable to load them at all. The server is a dedicated server that only runs our mysql database. i have been running some test using a profiler (JetProfiler) and tool to stress test (loadUI). If I use loadUI to connect with 50 simultaneous connections to one of our websites that runs a resently big query it will already make the website be unable to load. One of the things that makes me worried is that when I look at Jetprofile it always shows a Treads_connected of 1.00 and it seems that when it hits around 2.00 that I'm unable to connect. The 3 big peaks are when I run a test with loadUI, first one was 15 simultaneous connections wich made it still able for me to load the website but just really slow, the second one was 40 simultaneous connections which already made it impossible to load and the third one was with 100 connection which also didn't make it load anymore. Another thing that worries me is that in JetProfiler it says all the queries that get used are full table scans, could this maybe be the problem? The website I run as a test runs 3 queries, one for a menu that outputs around 1000 rows, one for the adds that has around 560 rows and a big one to get posts that has around 7000 rows (see screenshot bellow) I also have monitored the cpu of the server and there seems to be no problem there, even when I make a lot of connections with loadui the cpu stays low. I can't seem to figure out what is the main cause of the websites being unable to load when there is a high amount of traffic, if anyone has other suggestions for testing or something that might cause the problem please let me know.

  Read the article

• Anyone have real world experience with Rackspace Cloud Sites at high scale?

  - by Allara

  I have a pure web service application layer using .NET. I was originally planning to use Amazon EC2, but rolling my own autoscaling procedures is a bit intimidating, and the scaling isn't very granular from a cost perspective. If the app is successful, we could be looking at relatively high scale (millions of requests per month). The app uses Amazon SimpleDB as the database layer. As a test, I have the app running successfully in Rackspace Cloud Sites. Performance seems to be equal to (if not better than) a standard EC2 instance, even with the added latency of the SimpleDB requests travelling to the Rackspace network. However, testing at this stage is at a very low scale. My question is this: has anyone had real-world experience running a high scale application on Rackspace Cloud Sites? Moreover, once you pass the "included" 10,000 compute cycles per month, does the overall cost seem to be lower than rolling lots of EC2 instances? My assumption would be that with completely smooth scaling (i.e. only adding compute resources as needed), the cost could be lower on average. However, their stated goal of calibrating 10,000 CCs as a single 1.2 Ghz CPU seems on average to be much more expensive than EC2. I like the idea of no-touch scaling, but is it too good to be true?

  Read the article

• What may be wrong with String::ToIdentifier::EN tests?

  - by wk01

  I try to install Perl module String::ToIdentifier::EN (as depndency of DBIx::Class::Schema::Loader) but it fails on tests. I googled those errors but get no picture, where is problem: Building and testing String-ToIdentifier-EN-0.07 cp lib/String/ToIdentifier/EN.pm blib/lib/String/ToIdentifier/EN.pm cp lib/String/ToIdentifier/EN/Unicode.pm blib/lib/String/ToIdentifier/EN/Unicode.pm Manifying blib/man3/String::ToIdentifier::EN.3pm Manifying blib/man3/String::ToIdentifier::EN::Unicode.3pm PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/00_basic.t t/10_ascii.t t/20_capitalization.t Byte order is not compatible at ../../lib/Storable.pm (autosplit into ../../lib/auto/Storable/_retrieve.al) line 380, at /home/wanradt/perl5/lib/perl5/Lingua/EN/Tagger.pm line 167 # Looks like you planned 25 tests but ran 4. # Looks like your test exited with 25 just after 4. t/00_basic.t ........... Dubious, test returned 25 (wstat 6400, 0x1900) Failed 21/25 subtests Byte order is not compatible at ../../lib/Storable.pm (autosplit into ../../lib/auto/Storable/_retrieve.al) line 380, at /home/wanradt/perl5/lib/perl5/Lingua/EN/Tagger.pm line 167 # Looks like you planned 768 tests but ran 512. # Looks like your test exited with 25 just after 512. t/10_ascii.t ........... Dubious, test returned 25 (wstat 6400, 0x1900) Failed 256/768 subtests t/20_capitalization.t .. ok Test Summary Report ------------------- t/00_basic.t (Wstat: 6400 Tests: 4 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 25 tests but ran 4. t/10_ascii.t (Wstat: 6400 Tests: 512 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 768 tests but ran 512. Files=3, Tests=528, 1 wallclock secs ( 0.07 usr 0.02 sys + 0.42 cusr 0.04 csys = 0.55 CPU) Result: FAIL Failed 2/3 test programs. 0/528 subtests failed. make: *** [test_dynamic] Error 255 -> FAIL Installing String::ToIdentifier::EN failed. See /home/wanradt/.cpanm/build.log for details. Byte order is not compatible at... seems a key, but to where?

  Read the article

• Outlook 2010 - Missing New Mail Envelope Icon

  - by sdoca

  I've seen a number of posts related to this issue, but none with a solution that works for me. I have: Windows 7 Professional 64 bit Office/Outlook 2010 "Show an envelope icon in the taskbar" checked "Hide When Minmized" selected "Show icon and notifications" selected for Outlook in my taskbar settings This used to show me the envelope icon in my notifications area. Then something happened with my user profile and the sys admins created me a new one. Since then, the envelope only displays if Outlook is not minimized. It doesn't matter if I unselect "Hide When Minmized", the icon still doesn't display when new mail arrives. If I select "Display a Desktop Alert", then the icon is displayed. However, I HATE the desktop alert as I find it too intrusive/distracting. Is there some way to just get the envelope icon working (again)? UPDATE More testing and sometimes I will and sometimes I won't get an envelope icon with the desktop alert turned on. This is driving me nuts!! UPDATE TWO I like my notification area of the taskbar to be clean. So, all icons are set to "Only show notifications" except for Outlook as noted above. I've noticed the envelope icon is being displayed in the expanded notification area when I click on the up arrow to view all icons. So, it is being added to the notification area, but not displayed. It's a rather useless feature now...

  Read the article

• Find which files an apache process is writing to?

  - by Haluk

  We have this apache process which becomes io-bound time to time. Using atop, we can see it is a write operation. Using lsof -p <PID> we can see a list of files open by the httpd process. First we thought "log" files must be the problem. So we turned them off just to test. However write operations still continues. We will continue testing a few other things. For instance we use php session variables a lot. Maybe php session files are getting all the writing. But is there a way to quickly identify files which get written to by the httpd process? This way we can focus our efforts on those files. UPDATE: We used the strace command as suggested. Here are two lines from the output. write(23, "\27\0\0\0\3SET CHARACTER SET utf8", 27) = 27 write(23, "\17\0\0\0\3SET NAMES utf8", 19) = 19 We do not have a mysql process on this server. So is strace also showing what is being written to an ethernet port? UPDATE2: During high io load, the process which consumes most of the write resources gives the following output to strace -e trace=write -p <PID>: --- SIGCHLD (Child exited) @ 0 (0) --- write(9, "!", 1) = 1 write(19, "OPTIONS * HTTP/1.0\r\nUser-Agent: Apache (internal dummy connection)\r\n\r\n", 70) = 70 However I cannot figure out where these are being written to.

  Read the article

• What switch should we use for PCoIP?

  - by Jay R.

  We have a small lab space that seats 10 people and has 20 machines. Each machine is set to 1920x1200 resolution because the user apps are best used at that resolution. Currently the machines are all located close enough to montors that a DisplayPort cable will reach, but the pending lab remodel positions them around 80 feet or more away in racks. Our proposed solution is to use PCoIP. We purchased 10 PCoIP portals and 20 PCoIP host cards. We plan to set up a dedicated network to handle just the PCoIP traffic. After testing just one portal and one host card with a cheap 1G switch from a local office supply store, we were left with less than good impressions about the usefulness in our lab. The framerates were not spectacular and the mouse seemed jerky. Our concern is that we can't get away with the cheap 1G stuff from the store because adding more machines to the switch will just make the user experience worse. What switch would be recommended to best support our PCoIP situation? We will need to plug in at least 30 cables based on just those machines. Is there a particular feature to search for that makes a difference? Is there a switch that works best with PCoIP? Added Info: The reporting webapp for the host card shows maximum bandwidth usage to be 220000 kbps. The average appears to be around 180000 kbps. The reverse direction is much lower, like 15000 kbps.

  Read the article

• Dual hard drive Windows 7 system, modified the registry to get programs to install on second drive, now IE doesn't work

  - by paul

  I have a dual hard drive Windows 7 system, Windows is installed on an SSD (C:) and I modified the registry to try to force programs to install on second HDD drive (another letter). The registry edits are pretty simple, just a few keys in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion to change the drive letter. For the most part the system is very fast and works great, but IE doesn't work anymore. With IE10, it opens for a flash with a white window then closes. I tried installed IE11 which opens a white window for a few seconds, doesn't respond, then crashes. I've tried all the solutions I could find. This includes resetting the IE settings, "uninstalling" and re-installing IE, which is just turning it on and off in "Turn Windows Features on or off", copying the Program Files\Internet Explorer files onto both/either drives, changing the registry keys back to use C:, lots of rebooting, and safe mode. Nothing has worked. I don't see errors in the event viewer, but I might not know what to look for. Any ideas on how to get IE running? I don't need IE for daily browsing, I just need it for cross-browser testing on sites I build and on the rare occasion a page only works in IE. I don't really want to use a virtual machine, but would be ok with something standalone like tredosoft's, but I'm not aware of something like that for current versions of IE.

  Read the article

• Ubuntu + LigHTTPd: Server requests taking ages

  - by ctrl_freak

  I've had an issue since upgrading my distro a couple of weeks ago from hardy; receiving data after making a request has increasing intervals of nothing, as you can see from the picture below. http://i49.tinypic.com/2w5lvr9.png I have since reinstalled fresh from an Ubuntu 10.04 Server (i386) disk, but am still having the same issues. I'm running on a LigHTTPd, MySQL, PHP5 stack. The surprising thing is, that local browsing using lynx is super fast, as expected. Initially, after reinstalling, I copied over the old configuration files from the previous installation, but have since reinstalled LigHTTPd and rebuilt the config file from scratch. The only correlation I could find, was that I attempted installation of ionCube and Zend Optimizer for a script I was testing, however I would think that it could no longer impact seeing I had reinstalled the OS. I have also removed Suhosin just in case, however it had no impact. I'm thinking it possibly has something to do with networking, but I wouldn't know where to start. The server is manually assigned an IP by it's MAC address on the router. The fact that the time seems to be exponential (to a point) worries me. I've tried strace'ing the LigHTTPd and MySQL processes, however I couldn't see anything obvious, not that I'd really know what I'm looking for. RAM and CPU usage don't seem to be out of the ordinary, but I can't say its perfect.. I'm hoping someone has experienced the same, or can point me in a direction, as searching has proved fruitless as I don't know anything specific. Config files can be posted, if requested.

  Read the article

• VMWare Server modifying files related to paused VMs, is this expected?

  - by David Spillett

  While refreshing the backup of a VM used for testing, I experienced the following warning from tar: tar: /VMsR0/cli_noddyco_test/VM2K8_32_web.vmem: file changed as we read it The VMs in question were paused at the time. My first though was that I'd mixed up the machines and was trying to backup something that was still actively running. To be sure I unpaused and properly shut down the VM, and the vmem files that tar reported changing vanished as I would expect. Is it normal for VMWare Server to touch or alter files for paused VMs like this, or is there likely something amiss with our setup? If this is expected behaviour, is just touching the vmem file (and so altering the last modification date without actually changing content)? If it is normal for files relating to paused VMs to be updated I shall have to revise our backup procedures to make sure the VMs are fully shut down fully rather than just pausing them (this isn't a problem, but it seems strange and I'd prefer to understand what VMWare is doing and why instead of just dismissing it as "one of those things" and working around it). For further detail: the host in question is VMWare Server version 2.0.2 running on 64-bit Debian/Lenny, and that VM did not have a snapshots at the time. We have backed up paused VMs this way in the past with no such warnings from tar.

  Read the article

• Maintenance window and recovery for a large database

  - by NYSystemsAnalyst

  One of our teams is developing a database that will be somewhat large (~500GB) and grow from there (I know 500 Gigs may seem small to many of you, but it will be one of the larger databases in our shop). One of the issues they are grappling with is backing up and restoring the database. Basically, the database will have several "data" tables and one table used for storing images / documents. We need to accomplish the following: Be able to quickly backup and restore only the data tables (sans images) to our test server for debugging and testing purposes. In the event of a catastrophic database failure, restore the data tables only to get most of the application up and running ASAP. Then, restore the images table when possible. Backup the database within the allotted nightly time window (a few hours). My questions are: Is it possible to accomplish the first two goals while still having the images stored in the same database? If so, would we use filegroups, filestream, or something else? How do other shops backup their databases in a reasonable time window while maintaining high availability? Do you replicate to a second server and backup from there?

  Read the article

• Why domain.com appears as theplant.com when hosted on hostgator?

  - by silow

  I have a script that's supposed to detect the url of its caller website. If the caller is another website, it should give something like http://callersite.com. I'm using this line of php code (though I suspect this won't matter for sysadmins) gethostbyaddr($_SERVER['REMOTE_ADDR']) I'm testing with a caller site that's hosted on hostgator. What I'm noticing though is that I don't get callersite.com, I get something like 1a.12.12ab.static.theplanet.com. I don't know what theplanet.com is and why I'm not getting caller site.com. Also what do I need to do to really get the domain of the site making a call to my script? -- Thanks for the explanation. Some have advised I use $_SERVER['HTTP_REFERER'] but it's not what I'm after. My script acts as an API. Another website makes a curl request to it and gets an output and later on presents it to the user. So http referrer gives false since the caller site.com is making a direct call to me. So any hope?

  Read the article

• Windows 7 PC freezes frequently with hard disk light constantly on

  - by Senthil

  I recently replaced a defective hard disk with a new one - Windows 7 - "A disk read error occured. Press Ctrl + Alt + Del to restart" I have been using the new hard disk with a Windows 7 installation for about 4 days. Now it has started freezing frequently. Sometimes every 2 minutes and sometimes every 10 seconds. There is lots of software installed - I am a developer and my PC is full of IDEs, database servers, web servers, developer tools, testing tools, all browsers etc.. My windows is up to date as of now. I have installed ALL updates including optional drivers etc. All my installed software is up to date. I scanned my computer using Microsoft Security Essentials and found nothing malicious. I did a chkdsk /r and found no problems. I did a memory diagnostic and found no problems. When I go into safe mode, it doesn't freeze and I am able to use it normally for longer periods of time. What other steps can I take to locate the problem?

  Read the article

• What is my BaseDN supposed to be with the following configuration of OpenLDAP?

  - by fuzzy lollipop

  I have the following in my OpenLDAP configuration. Using the latest version OpenLDAP on Centos 5.3. Installed using yum. From my /etc/openldap/slapd.conf database bdb suffix "dc=company,dc=com" rootdn "cn=Manager,dc=company,dc=com" From my /etc/openldap/ldap.conf BASE dc=company,dc=com I have successfully added an entry with ldapadd and retrieved it with ldapsearch from a local bash shell on the box. Now I am trying to get a Graphical Editor to connect to this server remotely so I can enter people from my laptop. But I am having no luck. I tried JXplorer, and it connects with Anonymous bind without me having to specify a BaseDN but I can't edit anything that way. If I try and give it a user name and password, using Manager and my rootpw I have in clear text just for testing, every GUI Client on my remote laptop complains about my BaseDN not being the correct format when I enter dc=company,dc=com and I tried cn=Manager,dc=company,dc=com. Error opening connection: [LDAP: error code 34 - invalid DN] I have tried multiple clients and all of them connect as anonymous, none let me connect authenticated where I can actually create or edit anything. I am using Manager as my username and the password from rootpw, is that correct?

  Read the article

• Office 2010 Trust Center settings: How to enable data connections in the "old" way?

  - by GSerg

  We're planning an upgrade Office 2003 - 2010 and have identified a big problem. In Office 2003, if the workbook you're opening contains a query table that fetches data from a data source automatically (upon file open or in certain intervals), then a security dialog pops up - whether you want to allow that. If you say Yes, the queries will refresh automatically when they need to. If you say No, the queries will not refresh automatically, neither on file open nor on time intervals, but you will be able to refresh any of them manually at any time by right-clicking and selecting Refresh. There is also a registry parameter to say, Don't display that dialog, just allow the queries. This is exactly what we want. On users' computers we have the registry parameter applied, so the users never see any dialogs. On developers' computers the parameter is not applied, so every time a file is opened the developer decides whether to allow the auto-refreshing for the current session. Usually the answer is No, because for developing, it is essential to not have quieres refresh when they want to, but instead, refresh them when the developer wants. The problem is that in Office 2010 which we are testing we can't find a way to achieve this functionality: The allow/disallow messages are now grouped into one yellow button, that either allows everything or disallows everything (including, say, macros, if macro security is set to "Disable, but ask"). If you don't click the yellow Allow button, the queries are disabled completely, not just for automatic execution. You cannot right-click and refresh a particular query -- doing that would summon a security dialog prompting for enabling queries, and if you say Yes, all queries in the document will be enabled for auto-execution and will start executing immediately. This sort of ruins our development environment. Is there a way to get the trust thingies in Office 2010 to work in the same way as before? Is there a yet another registry parameter to say, Prompt for auto-refresh, but allow manual refresh even when auto-refresh is disabled?

  Read the article

• Nginx conditional not evaluating correctly

  - by cjc

  I'm running into a weird problem with nginx and how it evaluates conditionals. Here's the relevant configuration: set $cors FALSE; if ($http_origin ~* (http://example.com|http://dev.example.com:8000|http://dev2.example.com)) { set $cors TRUE; } if ($request_method = 'OPTIONS') { set $cors $cors$request_method; } if ($cors = 'TRUE') { add_header 'Access-Test' "$cors"; add_header 'Access-Control-Allow-Origin' "$http_origin"; add_header 'Access-Control-Allow-Methods' 'POST, OPTIONS'; add_header 'Access-Control-Max-Age' '1728000'; } if ($cors = 'TRUEOPTIONS') { add_header 'Access-Test' "$cors"; add_header 'Access-Control-Allow-Origin' "$http_origin"; add_header 'Access-Control-Allow-Methods' 'POST, OPTIONS'; add_header 'Access-Control-Allow-Headers' 'X-Requested-With, X-Prototype-Version'; add_header 'Access-Control-Max-Age' '1728000'; add_header 'Content-Type' 'text/plain'; } So, the conditional blocks never trigger. When I remove the conditions, I see that the "Access-Test" header and the "Access-Control-Allow-Origin" set correctly, but, as noted, enabling the conditionals causes the headers not to be sent. I'm testing by running: curl -Iv -i --request "OPTIONS" -H "Origin: http://example.com" http://staging.example.com/ Am I missing something obvious? I've tried the "if" with and without quotes, etc. This is nginx 1.2.9.

  Read the article

• LAN Webserver not accessible through PPTP VPN

  - by Joe

  I have this LAN Network with 10 clients and one server. The server has 4 virtual machines and a BIND DNS Server. When the router assigns an IP through the DHCP , it also gives the ip of the DNS Server, to resolve internal domains. Everything apparently works fine, the clients being able to access the server's vm's resources, but I also have to create the possibility of remote access. I installed the PPTP VPN on the server, and the vpn clients would get the same ip address range as the router's dhcp is assigning. Apparently everything is fine here also, except the fact that when we connect through the vpn , we cannot access the webserver on port 80 ( the webserver being one of the server's VM ). The iptables on the webserver has been turned off for testing purposes and the router's firewall is directing all the external traffic to the server. Can somebody suggest a solution to this? Extra details : VPN Server : PPTP Server Centos 6.3 x64 VPN Client : Windows 7 default PPTP VPN Connection The client is successfully connected to the server, everything works ( FTP/MYSQL/SSH/DNS ) , except the fact that when I try to access the webserver IP on the browser, it won't work.Pinging it works perfectly.

  Read the article

• Emails sent from Coldfusion using the same SMTP/Exchange server works from one machine but fails for another

  - by Peter Herdenborg

  First, apologies if this question is too vague or has too little information to really be answerable. I am not normally working with these issues, and I don't have full access to the environment. However, the hosting provider seems to have a hard time tracking down the issue, so I am hoping that someone can at least provide me with some qualified guesses about the most likely problem. Here goes: A client I work for has a hosted IT environment, based on virtual machines running Windows 2008 R2 Standard. Our website, based on Coldfusion 9 was recently migrated from one virtual machine to another, and though Coldfusion is configured in the exact same way, using the same SMTP server, i.e. the client's Exchange server hosted in the same environment and in the same AD as both web servers, sending emails to external recipients is no longer working. It is still working fine when testing from the old machine. This is what I've learnt so far (all emails are sent using a valid from-address on the client's domain): Emails sent to other recipients on the same domain are delivered without any problem. Emails sent to external recipients on other domains are never delivered. When sending emails to both internal and external recipients, no emails are delivered. When receiving one of these emails to an internal address, the sender is now indicated as "[email protected]", while when sent from the old machine, it used to say just "sender". This seems to me that it could hint that the Exchange machine "recognizes" the old web server while it is a stranger to the new. In Coldfusion's mail log, all messages appear to be successfully delivered to the SMTP server. Any ideas what settings to look at, what log entries to search for or how to compare the old web server with the new one will be highly appreciated.

  Read the article

• 2 Computers, same network, different outgoing speeds when uploading to internet?

  - by user117339

  I have 2 work machines in my office, a PowerMac G5 and a MacBook Air. Both behind an IPCop firewall. The PowerMac is connected through a gigabit switch, the MacBook Air is connected through a Netgear 802.11g access point that is then plugged into the gigabit switch. There is also a FreeNAS box, both machines are able to read and write files to it at close to their pipe speeds. The main problem is when I am trying to upload files to the internet at large. The G5 is only hitting 0.1 - 0.25 Mbps. The Macbook is able to hit 2-3 Mbps. The setup (G5 / IPCop / Network) has been the same for 5 years. The issues with the internet speed started about 3 months ago. I hadn't tested on the Macbook at this point. I had complained to the ISP, they said their modem needed a firmware update, did that nothing changed. Reset IPCop, turned off squid, etc. No changes. The ISP switched the office over to a better plan with a theoretical 6 Mbps up, still no change. At this point I tried testing the Macbook, and lo and behold there's the speed. But why? I have tried changing out everything, cables, switches, using another ethernet port on the G5, wiping the system, using DHCP, using manual IPs, changing DNS servers, etc. Nothing works. I figured that if there was something horribly wrong with the network, then internally I would find a similar issue, but that is perfect. iperf, ping, etc show no dropped packets and near saturation of the internal network. I'm at a loss as to what the heck is going on. Any ideas would be appreciated! Below are some screenshots of speedtest.net: G5: Macbook Air:

  Read the article

• Windows Server 2008 IIS7 - page requests randomly hang or timeout

  - by seb835

  I've just installed a fresh copy of Windows Server 2008 x64 with IIS7 and PHP (fast CGI). However, I'm noticing that after moving my web site from a similarly specified machine to this one, I'm getting issues. The issue seems to be that randomly, as I'm clicking through the web pages being served, the browser will suddenly hang saying "waiting for mysite.com...". Sometimes the page will then timeout, or finally resolve after 20 to 30 seconds, but maybe missing the CSS style sheet. Very strange, as this is the only website installed on this new server, and only myself using/testing it. Server is installed in the same data centre below the old server. Has anyone else had a similar problem? I tried increasing the max workers pool to 10 (from 1), but this has no effect. Seems to happen most frequently after 1 or 2 minutes of inactivity on the website, then trying to load/refresh a web page. Many thank for any info and help. Kind Regards, Seb

  Read the article

• Cisco ASA 5505 - InterVLAN NAT Exemptions Implementation not working

  - by Brandon Bearden

  Short version is we cannot communicate between our subnets. We have a Cisco ASA 5505 we are using for our network router. We have a Netgear L3 switch behind that with 10 vlans. Each VLAN is on its own subnet. (10.0.10.x/24, 10.0.11.x/24, etc) So ASA Switch Hosts We have PAT for each subnet to our outside interface. Each subnet NATs out properly. I have NAT exemption enabled for 2 of the subnets (eventually I will need all, but am just testing at the moment). Config is here: http://pastebin.com/pDsG7hsh I have tried multiple ways for the NAT exemption to allow all traffic from our inside VLANS. At this point in time I am trying to get "Engineering" to communicate with all hosts on "AuthUser". I can ping some hosts, but not as many as if I am directly on the interface. I can reach a port 80 service, but not 443. I cannot access anything via hostname or NetBIOS. What am I missing to allow higher security level interfaces to fully communicate with lower security level interfaces? Thx!

  Read the article

• Can anyone help me make my reverse proxy actually cache?

  - by Lenary

  Hi folks, I'm trying to configure a Reverse Caching Proxy but so far have had no luck. I would preferrably like to use apache (that will be all it will be used for), but am open to solutions using other software that can also run on Mac OS X 10.6 (I have also tried using Varnish and Squid, but with no more luck). We're running a system with about 80 mac mini clients that will be requesting lots of video from a server. To reduce load, we thought we could use Apache (which comes on the macs by default) to cache this video forever (or at least as long as possible) onto the macs' disks. I have managed to get a reverse proxy set up with apache using ProxyPass etc, but when i tried to add CacheEnable disk / to the configuration, nothing happened (i do have mod_disk_cache included). Can anyone help with my issue? The apache config file is here Thanks in advance Edit: So far I have been testing it with smaller text files, and it hasn't been caching properly. This suggests it is nothing to do with us actually downloading video, but actually to do with the cache configuration.

  Read the article

• How do I get to the bottom of network latency and bandwidth issues

  - by three_cups_of_java

  I recently moved two blocks south. That move moved me from Comcast to Broadstripe (high-speed internet cable providers). Comcast was pretty good. Broadstripe sucks. I called them on the phone, and they basically brushed me off (politely). I want to come to them with some numbers, so I can say more than just "it's really slow". I still have access to my old Comcast service, so I can run the tests using both providers. Here's what I'm seeing with my new Broadstripe service: 1) When I browse to most sites, there is a long delay (5-10 seconds) before the page starts loading in my browser 2) The speed test tell me I have 12 megs down (bullshit) 3) I have a server at my office. I just downloaded some files (using scp on the command line). It said I'm getting 3.5 KB/s I'm an experienced programmer and spend most of my days on the command line and in vim. Networking, however is not a strong point. I've played around with traceroute, but I'm not sure if that's the right tool to use. I have access to servers all over the country (I would just use Amazon EC2 to set up a test server), and I prefer to use Ubuntu for my testing. How can I come up with some hard numbers to show Broadstripe how crappy their service is?

  Read the article

• How do I get yum to see updates to a local repo without cleaning cache?

  - by Matt

  I have set up a local yum repository which I use to install test builds. For the testing purposes, my packages are versioned by <svn version number>.<date>.<time> (e.g. 12345.20110908.150404 The trouble is, once I make a new RPM, copy it to the repository directory and run createrepo $REPO_DIR, yum does not see the new RPM as being available. $ cd $REPO_DIR $ ls -1 repodata package-12345.20110908.150404-1.x86_64.rpm package-12345.20110908.174329-1.x86_64.rpm $ createrepo . # ...snip... $ rpm -q package package-12345.20110908.150404-1.x86_64 $ yum list --showduplicates package Installed Packages package.x86_64 12345.20110908.150404-1 @repo Available Packages package.x86_64 12345.20110908.150404-1 repo I can see the updates and grab them if I run yum clean all and then re-fetch the metadata, but I think this just means I need to be doing something else from the repo, as I don't have to do that for other yum repos. How do I need to set up my local repository so that I only need to run yum update from the client without having to clean my yum cache?

  Read the article

• How can I generate filesystem images that are usable on many different virtualization systems?

  - by Mark Longair

  I have written a script that generates a root filesystem image (based on Debian lenny) suitable for User-Mode Linux. (Essentially this script creates a filesystem image, mounts it with a loop device, uses debootstrap to create a lenny install, sets up a static IP for TUN/TAP networking, adds public keys for login by SSH and installs a web application.) These filesystem images work pretty well with UML, but it would be nice to be able to generate similar images that people can use on alternative virtualization software, and I'm not familiar with these options at all. In particular, since the idea is to use this image as a standalone server for testing the web application, it's important that the networking works. I wonder if anyone can suggest what would be involved in customizing such root filesystem images such that they could be used with other virtualization software, such as VMware, Xen or as an Amazon EC2 instance? Two particular concerns are: If such systems don't use a raw filesystem image (e.g. they need headers with metadata or are compressed in some particular way) do there exist tools to convert between the different formats? I assume that in the filesystem, at least /etc/network/interfaces will have to be customized, but are more involved changes likely to be necessary? Many thanks for any suggestions...

  Read the article

< Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >