Search Results

Search found 10023 results on 401 pages for 'manage processes'.

Page 310/401 | < Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >

• Hard Reset USB in Ubuntu 10.04

  - by Cory

  I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

  Read the article

• Timestamp Updating Constantly on /dev/null

  - by motorleague

  I've been working on a problem with a /dev/null file on an AIX system (just for background it looks as though it was inadvertently deleted and recreated as a normal file by somebody), but in trying to determine what caused the problem, I noticed that the timestamp on it seems to update every minute. I've observed this on several AIX servers at my workplace. At present I can't entirely rule out this be something specific to the Application being used at my workplace, so I compared with CentOS and Debian based computers at home last night. The CentOS box, which runs 24 hours, had a mod time on /dev/null of around 4 days ago (during which time it was essentially just being used as a web browser and multimedia player, although it would have had active but essentially unused Apache, MySQL and VMM processes running in the background). The timestamp on /dev/null on the Debian machine, which was a just booted laptop, pretty much reflected the boot time, but I tested redirecting STDIN from, and STDOUT to it, and the modification time was unchanged (I'm not sure 100% sure if directing data to /dev/null constitutes "writing to it" in the way it would a normal file). So my question is essentially, could anybody please offer any advice with regards to what circumstances (permissions changes etc.. aside) might cause the timestamp on /dev/null to update? Thanks very much for any suggestions. Alex.

  Read the article

• How do I know if I managed to completely remove an undetected trojan?

  - by ubuntuisbetter

  I catched a trojan that uses explorer.exe to reproduce itself in case of deletion of its autostart entry or main exe file in Programs/x. It had already tried to contact a suspicious server over explorer.exe, blocked that via my firewall. I: Removed the autostart entries from the registry Looked through my services if there was anything suspicious Deleted the trojan from Programs/ Went through System Volume Information to find a 2 month old explorer.exe and replaced the possibly infected one. There are no suspicious processes running now anymore (no duplicate explorer.exe) and nothing wants to connect this trojan owners sever either. I checked my system with several anti-malware programs too. What the trojan did: Started a second explorer.exe Always when I deleted the main trojan exe file it was reproduced (by the second explorer.exe) Always when I deleted the autostart entry it was reproduced by the explorer.exe too. When I terminated the suspicious explorer.exe, which used only half as much memory as the less suspicious one from Windows, a strange thing that I know from the computers in my Informatics class happened: A window popped up in the top left of my explorer-less desktop, titled "Personal settings for ... are ..." that obviously copied some files. Then both explorer.exes started again and the trojan was everywhere again. What did the trojan actually do to get explorer to rescue it? Is my PC clean of this newish trojan now? What are the other locations I should check for the trojan? The trjoan doesn't seem very high-level, could it have changed other system files or is the autostart entry vital for it? Thanks in advance, Your trojan paranoid friend (Getting linux in a week)

  Read the article

• java memory allocation under linux

  - by pstanton

  I'm running 4 java processes with the following command: java -Xmx256m -jar ... and the system has 8Gb memory under fedora 12. however it is apparently going into swap. how can that be if 4 x 256m = 1Gb ? EDIT: also, how can all 8Gb of memory be used with so little memory allocated to basically the only thing running? is it java not garbage collecting because the OS tells it it doesn't need to or what? TOP: top - 20:13:57 up 3:55, 6 users, load average: 1.99, 2.54, 2.67 Tasks: 251 total, 6 running, 245 sleeping, 0 stopped, 0 zombie Cpu(s): 50.1%us, 2.9%sy, 0.0%ni, 45.1%id, 1.1%wa, 0.0%hi, 0.8%si, 0.0%st Mem: 8252304k total, 8195552k used, 56752k free, 34356k buffers Swap: 10354680k total, 74044k used, 10280636k free, 6624148k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1948 xxxxxxxx 20 0 1624m 240m 4020 S 96.8 3.0 164:33.75 java 1927 xxxxxxxx 20 0 139m 31m 27m R 91.8 0.4 38:34.55 postgres 1929 xxxxxxxx 20 0 1624m 200m 3984 S 86.2 2.5 183:24.88 java 1969 xxxxxxxx 20 0 1624m 292m 3984 S 65.6 3.6 154:06.76 java 1987 xxxxxxxx 20 0 137m 29m 27m R 28.5 0.4 75:49.82 postgres 1581 root 20 0 159m 18m 4712 S 22.5 0.2 52:42.54 Xorg 2411 xxxxxxxx 20 0 309m 9748 4544 S 20.9 0.1 45:05.08 gnome-system-mo 1947 xxxxxxxx 20 0 137m 28m 27m S 13.3 0.4 44:46.04 postgres 1772 xxxxxxxx 20 0 135m 25m 25m S 4.0 0.3 1:09.14 postgres 1966 xxxxxxxx 20 0 137m 29m 27m S 3.0 0.4 64:27.09 postgres 1773 xxxxxxxx 20 0 135m 732 624 S 1.0 0.0 0:24.86 postgres 2464 xxxxxxxx 20 0 15028 1156 744 R 0.7 0.0 0:49.14 top 344 root 15 -5 0 0 0 S 0.3 0.0 0:02.26 kdmflush 1 root 20 0 4124 620 524 S 0.0 0.0 0:00.88 init 2 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/0 4 root 15 -5 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/0

  Read the article

• Hard Reset USB in Ubuntu 10.04

  - by Cory

  I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

  Read the article

• Booting Windows from different partition than system

  - by szamil

  I have bought an SSD disk, but my laptop (Dell Precision M6300) refuse to use it as a target disk for windows (AHCPI on/off, BIOS up-to-date). I can't exchange the disk unfortunately... But fortunately, I've managed to install windows using USB disk case. The problem is, that when I put that disk as my internal drive it can't boot. (Disk read error, Three Finger Salute ... ) So I tried with Linux (openSUSE), I manage to install it as well, but when I tried to boot GRUB from internal drive I get errors again. (Should I try GRUB2?) I figured out that I can boot into that internal hard drive's openSUSE system using small USB drive with GRUB, kernel and image on it. So, I just run GRUB from USB drive, it loads necessary stuff from the USB drive and then continues from the internal drive. I want to do the same with Windows. But GRUB (rootnoverify and chainloader +1) does not boot my windows on internal drive. The question: is there any chance to copy the critical windows' boot files into the USB drive, to make it possible to boot from that USB drive, but continue booting from internal (different in general) drive? The USB drive would became a system hardware key! ;-) Disk: Plextor M5S 128GB Sata III, laptop has Sata II, but it's compatible anyway, right?

  Read the article

• Preventing back connect in Cpanel servers

  - by Fernando

  We run a Cpanel server and someone gained access to almost all accounts using the following steps: 1) Gained access to an user account due to weak password. Note: this user didn't had shell access. 2) With this user account, he accessed Cpanel and added a cron task. The cron task was a perl script that connected to his IP and he was able to send back shell commands. 3) Having a non jailed shell, he was able to change content of most websites in server specially for users who set their folders to 777 ( Unfortunately a common recommendation and sometimes a requirement for some PHP softwares ). Is there a way to prevent this? We started by disabling cron in Cpanel interface, but this is not enough. I see a lot of other options in which an user could run this perl script. We have a firewall running and blocking uncommon outgoing ports. But he used port 80 and, well, I can't block this port as a lot of processes use them to access things, even Cpanel itself.

  Read the article

• Apache 2 settings for high traffic website

  - by Harry

  I'm having problems with the load on my website. It's an amazon ec2 server with 15Gb ram and 4 CPUs behind an LB. apachetop says I'm getting around 80 reqs per second which seems really low for this kind of server and the load ( given by top ) is usually around 15 but does increase to about 150 in 24 hrs. I'm seeing about 100 active apache processes at any time. Apache is in prefork mode. Mysql is used very little on the server and there are almost no static files. Here are my Apache settings: Timeout 20 KeepAlive Off MaxKeepAliveRequests 0 KeepAliveTimeout 3 <IfModule mpm_prefork_module> StartServers 40 MinSpareServers 25 MaxSpareServers 40 ServerLimit 400 MaxClients 400 MaxRequestsPerChild 4 </IfModule> Can anyone advise on how to tweak the settings? Thanx! Edit: The config was gotten by trial and error. Any and I mean by a number, change to these lines make the load skyrocket in like 5 minutes. It literally jumps to like 200-300 in a matter of minutes. Especially MaxRequestsPerChild. I've tried with 10, 15, 100, 1000 and the load just skyrockets. About php - there are actually only a few php files which aren't really that expensive at all. They just spit some simple stuff out. If I turn on KeepAlive load also goes to space..

  Read the article

• Mac always boots with incorrect display gamma (for years now including Lion)

  - by Alex Wayne

  I think somewhere, something got installed but I have no idea what or how to fix it :( Basically, my old MacBook Pro running 10.5 Leopard had a problem where on boot it would show everything on the screen in a very sort of crunched color space. Everything below 15% white would just be pure black, everything above 85% white would be pure white and all colors look to be a touch more saturated. It's garish. To fix it, I found that I could boot into almost any fullscreen 3D game. When the game launches, the colors would still be off, but when I then quite the game and return the desktop everything is normal again. I've noticed Blizzard games work most reliably for this (World of Warcraft or Starcraft2). This problem has followed me through the years. When I upgraded to an iMac I migrated everything over to it, and the issue now happens on the iMac too. I then got a new MacBook Pro for work and migrated my iMac over to that, and it has the problem too. I had thought that it was an OS bug, but upgrading to 10.6 Snow Leopard didn't fix it and neither did 10.7 Lion. Furthermore I can't find any reference on any forum or help site where anyone else has this problem. If anyone has any idea what processes or settings or apps I should look at to figure out why this is happening I should would appreciate it! It looks sort of irresponsible when I open my laptop in the office to work and then boot up Starcraft 2 full screen...

  Read the article

• Why is "start in" needed for Windows scheduled tasks?

  - by GomoX

  We develop a web application that can be deployed on Windows or Linux. The Linux implementation uses cron, and the Windows one uses scheduled tasks to run a single PHP script that processes all scheduled tasks for our system. The task is scheduled using schtasks during the install process, like: This has always worked both under W2003 and W2008. A week ago a customer reported that scheduled tasks were not running. He is running on Windows 2008. We checked over and over and finally solved the issue by entering the folder that contains the .vbs script as the "start in" folder for the scheduled task. This said, there is no way to set up the "start in..." value from schtasks without using an XML definition of the tasks. XML definitions don't work in Windows 2003, so I would have to add windows version detection to the installer, additional testing, etc (I'd like to avoid this if at all possible). The only atypical thing I noticed about the install is that the system is installed in D:\ as opposed to the default C:\Program Files (x86)\, but I don't see how this would matter. All the paths are absolute in all the scripts. Can anyone suggest a reasonable solution for this?

  Read the article

• Windows Server 2008 R2 grinds to a screeching halt during file copy operations

  - by skolima

  When my Windows Server 2008 R2 machine is performing any large disk operations (copying 10GB files from one drive to another, copying similar file over network, merging HyperV snapshots, compressing large files), performance of the whole machine slows down terribly, everything becomes unresponsive. This is noticeable in any situation when the disk access is large enough not to fit in the cache. Are there any settings available for tuning this behaviour? I can accept slower file transfer if this would give me more responsiveness. System details: Dell Optiflex 960, Core 2 Quad Q9650, 8GB RAM, 2 SATA drives - 320GB (ST3320418AS) and 1TB (ST31000528AS), NCQ active on both, Intel 82564LM-3 Gigabit Ethernet, ATI HD 3450 graphics, Intel ICH10 bridge. We have multiple machines like this, every one is exhibiting the same behaviour. I though this was overkill for a workstation, apparently I was mistaken. Update: I guess I shouldn't have mentioned the HyperV at all. The above configuration is a standard workstation setup at the company I work for, this is not a server of any kind. I have at most 3 virtual machines working, and usually I'm the only person accessing them. Never the less, the slowdown occurs even when no VMs are running. On a Linux machine I'd simply ionice the copy process and I could forget about it, is there any way to manage IO priorities on Windows?

  Read the article

• How to fix "The connection was restarted"?

  - by Altar

  I have a php script with ajax. Few days ago, without making any changes, the script stopped working. The script is working sometimes but it is very slow. Other times it doesn't load completely. Yet other times it loads and empty page or it shows a "The connection was restarted" message. We have tried loading the page from 4 different computers in two different countries (two different ISPs). There is nothing relevant in the server's log. We contacted iPage.com hosting support. We sent screenshots. And all we manage to get from them was an incomplete screenshot and the message 'We tested. The page loads'. So, they won't admit the fault. It looks like they loaded the page once and declared it is working and went back to playing solitaire. I know their support. We had all kind of problems with iPage hosting. My questions are: 1. There is any way to make this error more easy to reproduce? I mean instead of fixing the error to get it appear more often. 2. There is any way to test a server response, to see if it drops connections?

  Read the article

• Remote Desktop svchost (networkservice) & lsa.exe high cpu usage, hangs on welcome screen

  - by Rohan1

  We have deployed an RDS Farm with 12 virtual RDS servers using Hyper V. Currently some users are not able to log on. After passing credentials to the connection broker, the session hangs on the "Welcome" screen. Using resource monitor we've seen that svchost (with the "networkservice" service) has a CPU usage of 50%, when viewing the wait chain on the process it displays that it's waiting for a lsa.exe to finish. We can't kill any of the users processes, even when trying with taskkill /f. Suspending lsa.exe did work but didn't have any effect. The networkservice also couldn't be restarted. Also, if this happens, the current users logged on to the RDS server can't be displayed. Task manager crashes when viewing the users, RDS service manager crashes when viewing the users (even remotely) and the cmd command "query session" doesn't work. No antivirus is installed on the RDS server. The only thing we can do is rebooting the server, which is not an option because of the fact that other users are in active sessions. Does anyone have ANY idea what's going on? We didn't encounter this in our pre-production setup.

  Read the article

• SQL Server 2012 memory usage steadily growing

  - by pgmo

  I am very worried about the SQL Server 2012 Express instance on which my database is running: the SQL Server process memory usage is growing steadily (1.5GB after only 2 days working). The database is made of seven tables, each having a bigint primary key (Identity) and at least one non-unique index with some included columns to serve the majority of incoming queries. An external application is calling via Microsoft OLE DB some stored procedures, each of which do some calculations using intermediate temporary tables and/or table variables and finally do an upsert (UPDATE....IF @@ROWCOUNT=0 INSERT.....) - I never DROP those temporary tables explicitly: the frequency of those calls is about 100 calls every 5 seconds (I saw that the DLL used by the external application open a connection to SQL Server, do the call and then close the connection for each and every call). The database files are organized in only one filgegroup, recovery type is set to simple. Some questions to diagnose the problem: is that steadily growing memory normal? did I do any mistake in database design which probably lead to this behaviour? (no explicit temp-table drop, filegroup organization, etc) can SQL Server manage such a stored procedure call rate (100 calls every 5 seconds, i.e. 100 upsert every 5 seconds, beyond intermediate calculations)? do the continuous "open connection/do sp call/close connection" pattern disturb SQL Server? is it possible to diagnose what is causing such a memory usage? Perhaps queues of wating requests? (I ran sp_who2, but I didn't see a big amount of orphan connections from the external application) if I restrict the amount of memory which SQL Server is allowed to use, may I sooner or later get into trouble?

  Read the article

• How To Completely Move Users/Program Files/Program Files (x86)/ProgramData (Folders) To Another Partition(s) On Windows 8?

  - by Enigma83

  I am attempting to move folders Users Program Files Program Files (x86), ProgramData (at the root of the C drive) to at least 2 other partitions, preferably on a fresh install. I have read that there are methods for doing this post-install, but it seems like it would be a bit more tedious to do things that way. I want to move the 2 Program Files folders to another partition on the same HDD, and Users/ProgramData will go to yet another partition on same HDD. I have done a bit of research on this, read up on some things that involved booting into Audit Mode, using the RoboCopy command to copy folders via booting into my Windows 8 USB drive, creating NTFS junctions/symbolic links, Registry edits, as well as accomplishing this automatically by creating an auto-attend file which Windows Setup processes automatically before the user is ever booted in for the 1st time. I tried this morning and now have a basic installation in which programs like Internet Explorer fail to open, certain files can't be found/opened (even if I click on them directly), an example is Regedit. Also, I can't run the Command/DOS (CMD) prompt as Administrator (or otherwise, as any other user), can't activate the real Administrator account or open any of the Administrative Tools (despite having added them to my Start Screen). So far I have only tried RoboCopy-ing Program Files and Program Files (x86) so far, creating junction points for them, and editing the Registry in the relevant locations. This is what I'm left with now. I also found the following blog article which describes how to do this for Windows 7 So, where should I go from here and where can I find more information? And how can this be done without disabling the Metro apps, which I've read will stop working if you move ProgramData. Once I have everything moved, where do I install programs to? Do I tell them to install to C:\Program Files\Program Files (x86) or to the junctioned/symbolic-linked partition/drive? I plan to test in VMware virtual machines from here on until things are working correctly, while using a baseline default install for daily tasks.

  Read the article

• ubuntu 12.04 kvm virtual server network setup, can't get the machine to be connectable

  - by xyious

  I have worked on my Ubuntu Server host for weeks now and I just can not manage to get the virtual machines into the network.... here's what I need to do: I need to be able to create virtual machines that have IP addresses that can be reached from the outside (192.168 network). I need to be able to connect to the virtual machines through ssh, ftp, http and preferably https, anything else doesn't matter that much. So far everything seems simple enough and I have a lot of leeway in terms of IP address range and server/client configuration. I have the option of taking part of a /24 net as most IPs aren't used, and if it's absolutely necessary I have the option of creating a new /24 subnet. Also have the option of reformatting and reinstalling OS on the host and recreating the virtual machines as nothing has been done other than trying to get virtual machines to work. I would prefer if the virtual machines were just part of the normal network which would be 192.168.5.0/24. The host machine has 2 network cards so I don't even necessarily need the Host to be connectable in the same /24 network. I have tried (I think) just about everything from about 5 different tutorials on bridging (giving br0 the same IP that eth0 used to have (Host is able to connect to VM and vice versa, VM doesn't have outside network access), having eth0 set up like it always was and having br0 have a different IP (same as above), NAT with port forwarding (which I would have preferred not to use but will if it works), turning off one of the hosts network cards and just using one of them, different subnets.... etc. I do know my way around iptables fairly well.... Host is 64bit Ubuntu Server 12.04, using libvirt/kvm. edits: Local network is 192.168.5.0/24, host has static ip 192.168.5.254, GW .5.1 which is also nameserver. We have a second Local network at 192.168.10.0/24 with .10.1 GW, but both hosts and VMs were supposed to go into the .5 subnet. The .10 subnet isn't required, but it wouldn't be horrible if the Host were only accessible in the .10 subnet.

  Read the article

• puppet execution of a python script where os.system(...) command is not working

  - by philippe

  I am trying to manage Unix users with puppet. Puppet provides enough tools to create accounts and provide authorized_keys files for instance, but no to set up user password, and it tell to the user. What I have done is a python script which generate a random password and send it to the user by email. The problem is, it is not possible to launch passwd Unix command with python, I have then written a bash script with the command: echo -ne "$password\n$password\n" | passwd $user passwd -e $user Launched manually, the script works fine and the created user has its password sent by email. But when puppet launches it, only the python script gets executed, as if the os.system('/bin/bash my_bash_script') is ignored. No error is displayed. And the user gets its password, but the passwd commands are not launched. Is there any limitation with puppet preventing to perform what I described? Or, how can I otherwise change the user account, its expiration, and send password by email? I can provide more information, but right now, I don't know which are accurate. Many thanks!

  Read the article

• Am I safe on Windows if I continue like this?

  - by max

  Of all the available tons of anti-malware software for Windows all over the internet, I've never used any paid solution(I am a student, I have no money). Since the last 10 years, my computers running Windows have never been hacked/compromised or infected so badly that I had to reformat them(of course I did reformat them for other reasons). The only program I have for security is Avast Home Edition, which is free, installed on my computers. It has never caused any problems; always detected malware, updated automatically, has an option to sandbox programs and everything else I need. Even if I got infected, I just did a boot-time scan with it, downloaded and ran Malwarebytes, scanned Autoruns logs, checked running processes with Process Explorer and did some other things and made sure I cleaned my computer. I am quite experienced and I've always taken basic precautions like not clicking suspicious executables, not going to sites which are suspicious according to WOT, and all that blah. But recently I've been doing more and more online transactions and since its 2012 now, I'm doubtful whether I need more security or not. Have I been just lucky, or do my computing habits obviate the need to use any more(or paid) security software?

  Read the article

• Using Openfire for distributed XMPP-based video-chat

  - by Yitzhak

  I have been tasked with setting up a distributed video-chat system built on XMPP. Currently my setup looks like this: Openfire (XMPP server) + JingleNodes plugin for video chat OpenLDAP (LDAP server) for storing user information and allowing directory queries Kerberos server for authentication and passwords In testing with one set of machines (i.e. only three), everything works as expected: I can log in to Openfire and it looks up the user information in the OpenLDAP database, which in turn authenticates my user with Kerberos. Now, I want to have several clusters, so that there is a cluster on each continent. A typical cluster will probably contain 2-5 servers. Users logging in will be directed to the closest cluster based on geographical location. Something that concerns me particularly is the dynamic maintenance of contact lists. If a user is using a machine in Asia, for example, how would contact lists be updated around the world to reflect the current server he is using? How would that work with LDAP? Specific questions: How do I direct users based on geographical location? What is the best architecture for a cluster? -- would all traffic need to come into a load-balancer on each one, for example? How do I manage the update of contact lists across all these servers? In general, how do I go about setting this up? What are the pitfalls in doing this? I am inexperienced in this area, so any advice and suggestions would be appreciated.

  Read the article

• mysql disk io keeps increasing ... is that normal?

  - by trustfundbaby

  So I've been trying to figure out this disk IO problem I have been having with my linode VPS. Over the last day or two I've just left watch -n1 pidstat -d running in a console window and the output looks like this: Monitoring it over the last few days, I've noticed that my problem lies with the init, searchd, and mysql processes. Searchd is sphinx and all its indexes are on disk, so disk io there is inevitable (apparently). What I can't understand is why the disk reads (kB_rd/s) for mysql refuse to stabilize and just keep going up. It started out at 154 yesterday and is up to what you see in that screen shot. but disk writes (kB_wr/s) have remained pretty constant the entire time. My VPS only has 768MB RAM, my mysql db has a size of about 220MB and after running mysqltuner.pl and reading a bit about it, I've been advised to set my innodb_buffer_pool_size to 220MB but I simply cannot afford to do that ... I have it up to 150MB. My question is twofold. Why does the init process have that much disk reading to do? Why is mysql doing so much disk reading?

  Read the article

• Auto-restart mysql when it dies

  - by Los Frijoles

  I have a rackspace server that I have been renting to run my personal projects upon. Since I am cheap, it has 256Mb of RAM and honestly can't handle alot. Every once in a while, when there is a sharp uptick in traffic, the server decides to start killing processes and it seems that mysqld is a popular one for it to kill. I try to visit my site and am greeted with the message that there was an error establishing the database connection. Inspection of the logs reveals that mysqld was killed due to lack of memory. Since I am still as poor as I was yesterday and don't want to upgrade my rackspace VM's RAM, is there a way I can tell it to automagically restart mysqld when it dies? I have a thought to use something like crontab, but alas, I don't know exactly what to do there either. I guess I am product of the "Linux on your desktop" generation since I can do most things on my desktop and laptop (which run Linux almost exclusively), but still lack a lot of server administration skills for Linux. The server runs CentOS 6.3

  Read the article

• Folder Sharing NTFS permissions with Share Permission

  - by Muhammad Adly

  i have a problem on my domain, the history starting from when i had a server with WIN 2008 r2 installed with the following roles installed on it (AD, DNS, DHCP, File). From 1 month i decided to install a new server 2008 r2 server to get (AD, DNS, DHCP) and leave the file server on the old one. i did the following exactly: 1) robocopy all my data on external HDD 2) Install a new server with 2008 r2 3) transfer all 5 roles to transfer the domain to the new server (MainDC) 4) issue (NETLOGON, SYSVOL) not transferred but i decided to reinitialize them again an now they are operating (MainDC) 5) re-create and re-configure a new GPOs and link it to my OUs 6) reinstall Old server operating system with a fresh installation of WIN 2008 R2 (FileServer) 7) join my domain with my domain credentials. the issue when i tried to share folder on \fileserver the permissions that i had set in sharing permissions are applied on the main shared folder and subfolders. the security settings are not applied. i.e. Say i'm sharing \fileserver\MainFolder with sharing permission for Authenticated Users that can read, so every one can read this main shared folder, if i set security permission for \fileserver\MainFolder\User1 that User1 can Read\Write\Modify. User1 can not perform this processes when accessing it from Network Share, i tried alot of steps from topics online get ownership for folder, remove inheritance from parent folder, applying changes for child objects, i tried also to construct a new folder structure but also the same issue, i tried another host PC, also i get the same issue.

  Read the article

• Cisco 7206vxr cpu reducing

  - by naimson

  I have a 7206VXR (NPE-G2) . At the rate of 140 kpps i gain 80% of cpu . So i looking for ways how to reduce it? So i want to turn off netflow(but don't want to this,monitoring is highly important for me), but it will give me only 10-20% ? At this moment with 84kpps i have 58% sh processes cpu sorted give me this. PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 109 163534600 537236763 304 35.38% 32.83% 16.85% 0 IP Input 67 829396 52280 15864 0.15% 0.01% 0.00% 0 Per-minute Jobs 68 5542736 3053476 1815 0.15% 0.18% 0.16% 0 Per-Second Jobs 51 635852 1116315 569 0.07% 0.03% 0.02% 0 Net Background 329 120396 4607274 26 0.07% 0.00% 0.00% 0 EIGRP-IPv4 Hello 105 50508 95032488 0 0.07% 0.05% 0.05% 0 IPAM Manager 6 4068580 476916 8531 0.00% 0.07% 0.05% 0 Check heaps 7 7768 3634 2137 0.00% 0.00% 0.00% 0 Pool Manager 8 0 1 0 0.00% 0.00% 0.00% 0 DiscardQ Backgro 10 8 708 11 0.00% 0.00% 0.00% 0 WATCH_AFS 5 0 1 0 0.00% 0.00% 0.00% 0 RO Notify Timers 12 0 2 0 0.00% 0.00% 0.00% 0 ATM VC Auto Crea 9 0 2 0 0.00% 0.00% 0.00% 0 Timers 11 0 2 0 0.00% 0.00% 0.00% 0 ATM AutoVC Perio 13 296 610532 0 0.00% 0.00% 0.00% 0 IPC Event Notifi 16 0 1 0 0.00% 0.00% 0.00% 0 IPC Zone Manager 17 3584 2980311 1 0.00% 0.00% 0.00% 0 IPC Periodic Tim 4 0 1 0 0.00% 0.00% 0.00% 0 EDDRI_MAIN 19 0 1 0 0.00% 0.00% 0.00% 0 IPC Process leve 20 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat Manager 21 96 174453 0 0.00% 0.00% 0.00% 0 IPC Check Queue 14 4 50890 0 0.00% 0.00% 0.00% 0 IPC Dynamic Cach 3 0 1 0 0.00% 0.00% 0.00% 0 cpf_process_tpQ 24 756 305371 2 0.00% 0.00% 0.00% 0 IPC Keep Alive M 25 2340 610561 3 0.00% 0.00% 0.00% 0 IPC Loadometer 22 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat RX Cont 15 0 1 0 0.00% 0.00% 0.00% 0 IPC Session Serv 18 1620 2980310 0 0.00% 0.00% 0.00% 0 IPC Deferred Por 29 0 1 0 0.00% 0.00% 0.00% 0 Exception contro sh run(greped): http://pastie.org/5483194 Hardware: c7200p-adventerprisek9-mz.151-4.M1.bin Cisco 7206VXR (NPE-G2) processor (revision A) with 917504K/65536K bytes of memory. Processor board ID 2xxxxxxx MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2 6 slot VXR midplane, Version 2.1

  Read the article

• Incorrect Internal DNS Resolution

  - by user167016

  I'm having a DNS issue. Server 2008 R2. The first clue was that after being off the network for a month, I could no longer Remote Desktop into my workstation by name, it wouldn't find it. Both via VPN and internally. But if I connect using its IP, that works. Now I notice in the server's Share and Storage Management, in Manage Sessions, it's displaying the incorrect computer name for some users. So I try, for one example: Ping -a 192.168.16.81 Pinging BOBS_COMPUTER.ourdomain.local [192.168.16.81] with 32 bytes of data: - replies all successful Then I try Ping RICHARDS_COMPUTER Pinging RICHARDS_COMPUTER.ourdomain.local [192.168.16.81] with 32 bytes of data: -all replies successful In DHCP, .81 belongs to RICHARDS_COMPUTER I did try flushdns. Not sure if this is related, apologies if it's not, but when I try to connect, I also get prompted: "The identity of the remote computer cannot be verified. Do you want to connect anyway? The remote computer could not be authenticated due to problems with its security certificate. It may be unsafe to proceed.." It then lists the correct name as the name in the certificate from the remote computer, but claims that the certificate is not from a trusted authority. Any thoughts are most appreciated!

  Read the article

• OSX server setup suggestions

  - by Tom

  I am looking into the possibility to setup an OSX server for my employees, and would like some input on what is the best approach to meet my needs, and perhaps some suggestions if I am moving in the wrong direction. I am thinking of a Mac Mini OSX server, and are not sure if my needs will be met, and what possibilities are out there. I want these capabilities: - Groups/Users managed on server - Shared folders and private folders for users/groups - Access to activated services - Server hosting software for the users (developing tools ++) - Similar to Windows Terminal Server - Virtual desktop environment (both local and over internet/VPN) - Possible to access trough Mac and Windows The reason I am looking at OSX server is that my employees almost only work in OSX environment, and I want to offer the capabilities to logon to the server trough some kind of terminal software, and have full access to their work OSX environment and software on their mac or pc, from anywhere they might be. Instead of having to have multiple setups and need for spending alot of time installing and setting up needed software on every client. This is a small business, where some work on local network, and others from the internet, preferably trough VPN. But a terminal server solution, that are fast and easy to manage would be perfect for our needs. So if anyone have any experience with a similar setup, please let me know what you did, and your experiences with your setup.

  Read the article

< Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >