Search Results

Search found 16787 results on 672 pages for 'mod disk cache'.

Page 311/672 | < Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >

• Unable to create a Windows 7 system image of a failing hard drive

  - by Rahul

  The hard disk of my one year old T400 Thinkpad has started failing periodic hardware tests. I get a "Targeted Read Test Failed" error. The "SMART short self test" times out. I am now trying to create a Windows 7 System image of the hard disk but it fails without giving any specific error messages. I tried using Comodo Backup but got an error (code 101117) there as well. I have copied the important files in Dropbox but would like to take a full System backup as I have plenty of software installed on the machine. Does anyone know why this is happening and how I can take a backup of the system image ?

  Read the article

• end_request: I/O error, dev sda, sector xxxxxxxxx

  - by muruga

  I have a IBM server. This server contains 3 hard disk with RAID 5. It was working fine earlier. Unfortunately this machine got the following error message. After that I have rebooted the systems. After that I am getting the following error message in kern.log and demsg kernel: [65896.678870] end_request: I/O error, dev sda, sector 17430271 kernel: [69263.783957] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK : [69263.783957] sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] kernel: [69263.783957] sd 0:0:0:0: [sda] Add. Sense: Internal target failure Whether it is kernel problem or hard disk problem or Raid problem

  Read the article

• Robocopy to copy only new folders and files

  - by Valery Shampal

  A task: To find all new files and subfolders under some root folder (let us say Documents) and to copy them to other disk (j: in this case) Command line used: robocopy c:\users\valery\documents j:\robocopy /XO /E /MAXAGE:20131030 /XD Result: A full folders tree created. Only new files copyed, as supposed. It's good A point is, that I do not want to create all subfolders on a target disk, if there are no new files in them. Results are exeptable, but there is a lot of work to go through all folders and to find new files, as well, as to understand, what subfolders are a new ones Regards, Valery

  Read the article

• To Run Linux (Ubuntu) on Windows 7, is using Virtual PC one of the best ways?

  - by Jian Lin

  I need to try Linux (Ubuntu) and feel hesitant to install Ubuntu on top of a Win 7 machine to dual boot (might need to use Win7 and Ubuntu at the same time). Is creating a Virtual PC on Win7, and then installing the latest Ubuntu on that Virtual PC one of the better option? So I think I can create a Virtual PC with an empty virtual hard disk (vhd), say, for 30GB, and then put in the Ubuntu DVD-R or CD-R to install Ubuntu onto that empty hard disk. Update: for some reason, the first time Ubuntu 10.04 installation CD-R boots up, it asked for the Language, and "Install Ubuntu" and then the screen has vertical green bars and then the VPC just closed. The 2nd or 3rd time it booted up, there is no asking of Language or "Install Ubuntu" and just shut down the VPC, sometimes with vertical green bars. I even created another new hard drive and same thing happened. And created VPC 02, and same thing happened. Created VPC 03 with a fixed hard drive size of 60GB and same thing happened.

  Read the article

• Samba / smbd on Centos 6.5

  - by Satalink

  I've installed Samba4 and have the smb.conf file as follows: [global] workgroup = WORKGROUP server string = Samba Server realm = REXIALO.COM netbios name = REXIALO.COM security = user map to guest = Bad Password bind interfaces only = no interfaces = lo venet0 log file = /var/log/samba/samba.log max log size = 1000 [webroot] path = /usr/local/apache/htdocs comment = Example.com webroot directory read only = No I can connect from the same server with smbclient. Localhost: # smbclient -L localhost -U root Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Sharename Type Comment --------- ---- ------- webroot Disk RexiAlo webroot directory IPC$ IPC IPC Service (RexiAlo Samba Server) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Server Comment --------- ------- Workgroup Master --------- -------Enter root's password: network: # smbclient -L rexialo.com -U Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Sharename Type Comment --------- ---- ------- webroot Disk RexiAlo webroot directory IPC$ IPC IPC Service (RexiAlo Samba Server) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Server Comment --------- ------- Workgroup Master --------- ------- The problem is when I try to map to the smb webroot from Windows 7, it asks for user/pass but just times out and then prompts for credentials. The samba.log file does not show any activity other than the startup of the smbd process. Any help would be appreciated.

  Read the article

• VirtualBox: Grub sees hard drive, Linux does not

  - by thabubble

  I installed Linux on my second hard drive. I can boot to it just fine. But when I try to boot it from a Windows 7 host using http://www.virtualbox.org/manual/ch09.html#rawdisk, grub sees it and can load vmlinuz and initramfs. Log: :: running early hook [udev] :: running hook [udev] :: Triggering uevents... :: running hook [plymouth] :: Loading plymouth...done. ... Waiting 10 seconds for device /dev/disk/by-uuid/{root UUID} ... ERROR: device 'UUID={root UUID}' not found. Skipping fsck. ERROR: Unable to find root device 'UUID={root UUID}' It then drops me into a recovery shell. I checked "/etc/fstab" and it's empty, there are also no sd* devices in dev, the only thing in /dev/disk/by-id is a VBox CD device. I'm not too good with these kinds of things so help would be greatly appriciated.

  Read the article

• USB Format Error

  - by Dan Finan

  I'm having a real headache trying to reformat a USB drive. Initially it had a 200mb EFI partition and it caused the drive to disappear altogether. Since then I ran the CMD and wiped the disk using 'diskpart'. It took a few attempts but it finally cleaned the drive. Since then it has reappeared under (:E) however I am unable to access the drive and Windows is preventing me from reformatting it. I am just presented with 'Windows was unable to complete the format'. It's now acting like a CD drive instead of removable storage. I've tried going through Disk Management and I'm presented with the same error. I've removed the USB controllers from Device Manager - when the drive is connected again it re-installs the drivers and acts the same way. Any help given will be greatly appreciated, thank you. (Windows 7 machine)

  Read the article

• TrueCrypt with blank password

  - by TheSavo

  This might sound like an odd question, but please hear me out. I want to setup my laptop to use TrueCrypt, but without a password. My wife doesn't travel much with her notebook. There are occasions where we will have to travel and bring the notebook with us. This is when we would like the have the encryption. The time it takes to to change the unlock pass-phrase is considerably less than it takes to encrypt the drive. My thoughts are to leave the disk encrypted but with no password. Then when it's time to pack for a trip and bring the laptop, we would then change the pass-phrase and create a rescue disk.

  Read the article

• VMWare Workstation Dev Machine Disks: one fast or four echofriendly raid?

  - by Avi

  I'm building a new dev computer. It will be running a few VMWare Worksation virtual machines - A dev machine running VS-2010, a build machine, a version-control machine, a web server for testing, a "personal" machine running office etc. I'll be connecting the computer to my stereo, so I'll also be running iTunes (possible on a dedicated VM) and I want the computer to be a silent one. I'll probably use an Antec P183 case. I was advised on Serverfault to use Raid10 for performance. Raid 10 uses 4 disks. So, my question is as follows: In terms of heat, noise, reliability, warranty, price, capacity and performance, what would you suggest: A Raid10 4 disk array using eco-friendly disks such as the $94 1TB Western Digital Caviar Green, or one high performance disk such as the 2TB Western Digital Caviar Black at $280?

  Read the article

• Why sizes are different, and what do they mean?

  - by Ramy

  I have a 1 TB hard drive that consists of one NTFS partition which I use to back up my data (no operating system). The size of all the data in it is : 726 GB, size on disk: 728 GB, and the used space when I check the properties is: 731 GB. There's a 5 GB difference between the size and the used space. Why is that huge difference there? What's the difference between these sizes? (size, size on disk, and used space) Is there a way to calculate the difference, and be sure the HDD is not messing around? Is that normal?

  Read the article

• Resizing Windows 7 bootcamp partition

  - by Charlie

  I've installed Windows 7 on my Mac using bootcamp but stupidly only allocated it 25gb which isn't enough once I've installed Visual Studio and other stuff. I was able to shrink the Mac partition using whatever tool it is in Mac OS Snow Leopard but it wouldn't let me increase the windows partition so I rebooted into Windows to try it but am still having problems: I coudn't extend it using the disk management tool because the option is greyed out so I tried diskpart.exe but when I use the extend command with my partition selected it says: Virtual Disk Service error: There is not enough usable space for this operation. I've got 19.69gb of unallocated space though so am not sure why I'm having the problem. I don't want to have to wipe my Windows partition, any ideas?

  Read the article

• Does OEM partition stores Windows 7 serial key ?

  - by Mahesha999

  Does OEM partition stores the serial key which is grabbed by the Win 7 setup done from the disk provided with laptop. I realized that when you install clean system from Windows 7 disk you get with laptop, it grabs the serial key or it doesn't ask one. So from where it gets that serial key. Is it the OEM partition or anything else? Or the recovery partition stores the key? What all the things these two partitions do store in them?

  Read the article

• What does the the reconstruction process of mdadm do exactly on raid10

  - by Azrael

  I've got a system with 4 disks set up as raid10. All disks are usable, and mdadm all states them with UUUU. Due to a recent system crash, the raid is currently reconstruction the raid as it was marked as "not clean," and a reconstruction process was started. On a closer look smartctl shows problems on one disk: sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 24 cd 78 d4 sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed sd 0:0:0:0: [sda] CDB: Read(10): 28 00 24 cd 75 1e 00 04 00 00 With a research about the reconstruction process, I only found information concerning raid5 but nothing for raid10. Can I replace this problematic disk during the reconstruction process, or will I kill the raid with this?

  Read the article

• System reserved

  - by arun sidharth

  I have a HP laptop. I upgraded to windows 7 ultimate from home basic. Now I'm trying to upgrade to Windows 8 but when I do I get a message saying not enough system partition. So I opened the disk manager and increased the size of system reserved partition and it was of no use I still got the same error. Then I unfortunately deleted the 100MB system reserved partition by right clicking it and clicking format in the disk manager! Now I am not able to boot any CD's from the startup including OS and recovery CD. Whenever I press esc it always goes to the login screen and it doesn't say anything about the boot from CD option. Now I could not even use my recovery CD. I have 3 questions: Is it necesseary to create a system reserved partition if so how to create it? How to use my recovery cd How to install win 8

  Read the article

• Keyboard not responding during boot

  - by Peri

  My keyboard just stopped responding during boot. So I cannot go to BIOS or select system which I want to start. It is USB keyboard and it was working before. I borrowed PS2 keyboard and it also isn't working during boot. Lately I have been having problems with hard disk. Once every 2-5 minutes LED was on for 30 seconds and win7 wasn't responsive. I connected disk to another controller on motherboard and seems it is working now. All that suggests that to me that that motherboard is broken. What can I check? Or maybe you have some other suggestions?

  Read the article

• Revert a VM client from within the VM Client - is it possible?

  - by Saariko

  I am creating a test VM client for our QA department. Once it's installed, my options will be: Use a snapshot Use non persistent disk on the hard disk. For either options, I can give the role of QA_DEP the ability to log to vCenter and go back/power-off the client - so they can return to their clean machine. My question: is it possible to have that ability without using vCenter? What If I want that on a Client reboot - it will return to it's initial/clean state? The clients are not gonna be heavy loaded.

  Read the article

• Linux Read-Ahead Downsides

  - by JPerkSter

  Hi Everyone, Hope all is well. I have a question regarding read-ahead caching. Are there any downsides to raising the size of the read-ahead cache? On our farm, we're currently running at 256, and upon raising that higher, we are seeing significant throughput gains.   [root@server~]# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 7352 MB in 2.00 seconds = 3677.62 MB/sec 3 Timing buffered disk reads: 244 MB in 3.10 seconds = 78.68 MB/sec [root@server ~]# blockdev --setra 10240 /dev/sda [root@server ~]# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 11452 MB in 2.00 seconds = 5728.52 MB/sec Timing buffered disk reads: 422 MB in 3.17 seconds = 133.04 MB/sec We are running on 2.6. Thanks!

  Read the article

• Virtual Windows Servers and Pagefile location [closed]

  - by Luke Puplett

  Considering that Windows makes heavy use of the pagefile even with huge amounts of RAM available, is it not best to have this pagefile on the fastest disk possible as close to the virtual systems as possible? I'm thinking, RAM disk. Where I work, storage for VMs is out on a NAS/SAN. I'm worried that so much memory access is having to go across the network! As a side, I think its about time MS got rid of paging and told us to buy more DIMMS. UPDATE So this question has been downvoted??! Accessing a local spindle is C40,000 times slower than a DIMM, so going over the network will be even slower for hard faults. I don't know why I got the downvote, I'm certain that this is an issue unless there's some other mechanism in ESX/HyperV that manages this.

  Read the article

• How to troubleshoot if a zip file is valid or if it is big file size to be unzipped ?

  - by mireille raad

  Hello , I am trying to unzip a file with the size of 2GB I am getting the following error : unzip CLTE_C_08.zip Archive: CLTE_C_08.zip End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. unzip: cannot find zipfile directory in one of CLTE_C_08.zip or CLTE_C_08.zip.zip, and cannot find CLTE_C_08.zip.ZIP, period. After some googling, some people say that this error is because the file is too big, others say because file is corrupt, others say that it could be a not unix archive. So my question , how to find out if file is valid archive file on my Centos and what is the command/trick to uncompress big files ( if any ) Thanks in advance :)

  Read the article

• Corrupted file, hard drive test?

  - by all-R

  Hi guys, I'm currently on a macbook with a 1TB external hard drive connected trough a USB hub wich is connected on my macbook. The problem is, my disk, wich is partitioned in 2 (one HFS+ and one NTFS) keeps getting corrupted, recently it was my HFS+ partition, I could not repair it using the Apple's Disk utility, but was able to backup my files. Is it synonym that my hard drive is failing? Is it because of my USB hub? I also keep all my iTunes library on my external HD (HFS+ partition), and did a lot of transfer lately, adding files, removing etc. the last time, my partition got corrupted after a lot of deleted items. If anybody has an idea of what to check first, what could cause the problem, I would appreciate it :) Thanks!

  Read the article

• USB HD Freezes Windows Explorer

  - by nfplee

  I recently purchased a "Seagate STBX1000200 1TB Expansion 2.5 inch External Hard Drive". It has been working without problems until recently. When i plug the device into a USB port the device is recognised as it appears in the device manager but when i go to Windows Explorer and try to open it (or right click on it) it hangs/freezes windows explorer. Please note i am using Windows 7 Professional. I have already tried various things without success after searching for people with similar problems. I did read that it could be a problem with how the computer assigns a drive letter. But whrn i go to disk management (when running as an administrator) it hangs and displays the following message: Connecting to virtual disk service I'd appreciate it if anyone could offer some advice. Thanks

  Read the article

• Editor that supports renaming tabs for untitled docs?

  - by OverTheRainbow

  I sometimes need to copy/paste text into two windows and compare the contents for a quick hack, ie. without having to save both documents to disk, and display the two docs side-by-side vertically so I can scroll them independantly (WinMerge doesn't seem to support independent scrolling.) Since the documents only live in RAM, text editors will display a non-descript tab/filename like "Untitled1" or "New file 1": http://img171.imageshack.us/img171/1153/sidebysideunleddocs.jpg Does someone know of a Windows editor that supports... renaming tabs with more descriptive names even with documents that haven't been saved to disk, side-by-side, vertical tiling, and independant scrolling? Thank you.

  Read the article

• migrating storage to a different controller

  - by bellocarico

  Hello, I've just purcheased a couple of adaptec controller (2405/5405) for my ESXi 4.0 U1 servers. Currently ESXi and a couple of VMs are hosted on single sata boot disk connected to a nvidia on board non-RAID controller. I know that it's possible to migrate from single disk to RAID 1 with adaptec and I'm pleased with that, but I'm not sure if ESXi has already the right drivers installed/loaded for this controller. Is there any way I can check this? Is ESXi clever enough to recognize the new hardware and load the right module? Thanks

  Read the article

• Feedback on available mid-to-enterprise level desktop backup solutions [closed]

  - by user85610

  I am involved in the creation of a new backup solution to replace our current Retrospect setup, which has become a significant time sink to administer. We have almost 200 desktop and some laptop clients, both Windows and OS X. We're only interested in products oriented around disk-to-disk, and would be integrate well with our current set of nine NAS devices as target storage. I'd just like some feedback from anyone out there, as it's sometimes difficult otherwise to find objective reviews of software at this level. Both data and time are important enough that we need a reliable solution which won't be prone to self-destruction as often as Retrospect. Bonus points for de-duplication, which might help squeeze more service time out of our NAS setup in terms of capacity. Currently considering Commvault and Netbackup. Many other products I've seen don't have an OSX client. Any thoughts?

  Read the article

• Installing Solaris 10 on sunT5220 - ZFS/UFS raid 10?

  - by Matthew

  I am in a bit of a time crunch, and need to get two T5220's built. We were very happy to see two boxes in our aged inventory which had 8 HDD's each, but didn't think to check if they were running hardware RAID or not. Turns out that they aren't. When we install, we are given the option to use UFS or ZFS, but when we select a place to install we're only given the option of installing on one single disk. Is it possible to create a software raid 10 across all of the disks and install the OS on that? Sorry if any lingo is wrong, I'm not really a Sun guy and our guru is out of town right now. Any help would be really appreciated! Note: Most of the guides I've found on google entail installing the OS on a single disk, and then creating a separate RAID 10 on other disks. We would actually like the OS to reside on the RAID 10. Hope that clarifies things.

  Read the article

< Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >