Search Results

Search found 10328 results on 414 pages for 'behavior tree'.

Page 312/414 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >

• SVN hangs on commit - any suggestions for troubleshooting?

  - by Richard Beier

  We're having a problem with SVN... Subversion clients such as TortoiseSVN hang when we commit any more than a few files at a time to our server. Everything appears to actually be committed successfully to the repository; but the client hangs after all the data has been transmitted. We're using version 1.4.4 of the SVN server. We use the svn:// protocol rather than http to connect. We've reproduced this problem with several clients: TortoiseSVN (1.6.10), AnkhSVN (2.1), and the Silk command-line client (1.6.12). This is happening for everyone on the team, though some people seem to be more affected than others. If someone commits only a few files, it often works; but with more than half a dozen files, it usually hangs. Does anyone have troubleshooting suggestions? This has been happening sporadically for a while, but it's become pretty consistent lately. We've been working around the issue by killing the hung SVN client, doing "svn cleanup", and then doing "svn up"; but sometimes that causes tree conflicts. Another workaround is to blow away the workspace and check it out again after every commit; but of course that's pretty annoying. Are there any diagnostics that could help us troubleshoot this? We're considering upgrading to SVN 1.6 server, and installing the server on a new machine; but we're wondering if there's an easier solution. Thanks for your help, Richard

  Read the article

• Under what conditions will sendmail try to immediately resend a message instead of waiting for the standard requeue interval?

  - by Mike B

  CentOS 5.8 | Sendmail 8.14.4 I used to think that if SendMail experienced a temporary (400-class) error during delivery, it would place the message in a deferred queue (e.g. /var/spool/mqueue) and retry an hour later. For the most part, that appears to be the case. But every now and then, I'll notice log entries like this (email/domains renamed to protect the innocent :-) ) : Dec 5 01:43:03 foobox-out sendmail [11078]: qBE3l7js123022: to=<[email protected]>, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=124588, relay=exbox.foo.com. [10.10.10.10], dsn=4.0.0, stat=Deferred: 421 4.3.2 The maximum number of concurrent connections has exceeded a limit, closing transmission channel Dec 5 01:53:34 foobox-out sendmail [12763]: qBE3l7js123022: to=<[email protected]>, delay=00:10:31, xdelay=00:00:00, mailer=relay, pri=214588, relay=exbox.foo.com., dsn=4.0.0, stat=Deferred: 452 4.3.1 Insufficient system resources Dec 5 02:53:35 foobox-out sendmail [23255]: qBE3l7js123022: to=<[email protected]>, delay=01:10:32, xdelay=00:00:01, mailer=relay, pri=304588, relay=exbox.foo.com. [10.10.10.10], dsn=2.0.0, stat=Sent (<[email protected]> Queued mail for delivery) Why did Sendmail try again just 10 minutes after the first attempt and then wait another hour before trying again? If this is expected behavior, what scenarios will cause this faster requeue interval to occur?

  Read the article

• Wake-on-lan only works so many times

  - by Chance

  I have Wake-on-lan configured on my Windows XP machine so that the computer will wake up from Standby. Waking the computer from Standby via network traffic seems to work a certain number of times, say 4 or 5, then it stops working. If I restart the computer it seems to reset this behavior so that I can use WOL a few more times before it starts working. I use the command "wol" on my other, Linux machine with the appropriate IP address and MAC address of the card. I looked at the network card to see if it had different lights when WOL worked and when it didn't. When it has a solid amber light where the ethernet cable connects, WOL seems to work. When it has a flashing amber light, WOL does not. It seems that the system seems to almost "shut off" the card when it falls to sleep, but I don't know if this is a function of time or number of standby/wakeups. I have a 3Com 3c920 network card. If I look at the properties in Device Manager, I have "Allow this Device to bring the Computer out of Standby" checked. In the Advanced tab I have anything related to RWU (Remote Wake Up) enabled. I also believe I have the appropriate settings in BIOS related to Remote Wake-Up and I have tried both S1 and S3 power configurations in the BIOS. Intuitively, I would think I would uncheck "Allow the Computer to turn off this device to save power", but doing so disables the "Allow this Device to bring the Computer out of Standby" option. Does anyone know what is happening here or if there is a way to fix it? I have an integrated network card; would getting one that goes into a slot be better? I am running Windows XP on a Dell Optiplex GX240 with a 3Com 3c920 network card.

  Read the article

• Extremely Weird Computer Problem

  - by waiwai933

  Well, having worked with computers a long time, I thought I had seen everything that could go wrong with a computer. Today, I learned that I was wrong. My Mac has been behaving extremely weirdly. While the keyboard is fine, the mouse holds extremely weird behavior. It will open apps from the Dock, but not open documents from a Stack. The top menu bar will work, but only after I restart Finder. I am unable to close most windows, except with Cmd+Q. Clicking on a link in Safari, for some reason, opens it in a new tab. I can not select checkboxes, but I know a click is going through because you can see a quick indent in the check box, before it reverts to the unchecked state. I've restarted my computer, as well. I don't see a virus when looking through top, but I guess it could be subverting top. Does anyone have an idea what is going on?

  Read the article

• Printer spooler service stop running when sent print job

  - by Hanan N.

  Every time i am sending a print job to the printer, i am don't get any response from the printer, and at the printer job list at the status of the job, i see that there was an Error, but it don't give me any clue on what could be the problem. After some investigation i found that every time that i send the print job to the printer the printer spooler service stops to run, then after a second or two it start again (i think that this behavior is related to the printer spooler settings to rerun it self after it stops). Things that i have tried so far: Remove and Install again the Driver. After removing the driver, i have removed the unnecessary registry keys according to this article from Microsoft, these are: Rename all files and folders in: c:\windows\system32\spool\drivers\w32x86 Remove anything but Drivers Print and Processors: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x86 Remove anything in here: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors but: BJ Language Monitor Local Port Microsoft Document Imaging Writer Monitor Microsoft Shared Fax Monitor Standard TCP/IP Port USB Monitor WSD Port Disconnect and Reconnect the Printer. Clean the computer from Viruses & Spywares. Currently i am stuck, i have no more things to try, if anybody know about any kind of solution please let me know about it. Since i am want to keep this post as general problem that relate to the printer spooler, and not just my particular problem, i didn't included inside the windows version & the printer model, they are (although i think that it isn't relate just for that particular model): Windows 7 32bit, HP Officejet 4500 G510g-m (connect to the computer via USB). Thanks.

  Read the article

• Wake a Mac display from sleep via SSH

  - by MaxGabriel

  I'm using Jenkins as a CI server, where I'm SSHing into an iMac running OS X Mountain Lion (10.8.4) to run some UIAutomation integrations tests on an iOS app. The iMac actually sits 10 ft from me (but across a table) so I'm able to see the screen. However, the tests don't wake up the display, so I often can't see them. Is there a way to wake up the display from the terminal once Jenkins has SSHed in? So far I have tried using Applescript to press an arrow key, and using the Wake Assist application. I also tried setting the wake schedule to be the current date. Finally, I tried using the caffeinate command: caffeinate -t 300 &. The computer's "Wake for Wi-Fi access" checkbox is enabled. So far my best workaround is to just set the iMac to stay awake for atleast 3 hours. However, it'd be nice to keep normal sleep behavior, as I hypothesize that the screen waking from sleep would alert me visually that the integration tests are running. It's also significantly cooler :)

  Read the article

• How to reinstall bootloader after migration to SSD

  - by hijarian

  I must say, it was difficult to name this question. Basically, I need to properly reinstall the bootloader on my system, because I already have the working system disks for my OSes. The long story is this: I had the large slow HDD with Windows7 & Debian Wheezy dual-boot on it, perfectly bootable. Then, I ordered the SSD drive and prepared my system partitions to fit onto the much smaller SSD. I wanted the following schema: 128 GB Windows 24 GB / on Debian 86 GB /home on Debian Strange size for /home because there's no such thing as true 256GB disk drive. So, I've prepared such a partitions on my initial HDD and installed the new SSD and then I loaded the GParted live USB (can't remember now how it was really named), and then just copypasted the partitions from HDD to SSD. So, now I have the following partitions across the physical disks: SSD 128 GB copy of original Windows partition 24 GB copy of presumably Debian / 86 GB copy of presumably Debian /home HDD 128 GB Windows 24 GB / on Debian 86 GB /home on Debian ... several other partitions with non-system data ... And the behavior of the system right after the Ctrl+C, Ctrl+V in GParted was as follows: no GRUB, system boots right into the Windows on HDD. In BIOS settings are to boot from SSD first. I managed to create the Debian Testing installation USB and loaded it into the rescue mode, found that it identified my SSD as /dev/sda and installed the GRUB to the /dev/sda. Now my system loads the GRUB which lists both Windows and Debian. From HDD. So, I am now back into initial position. Please, how I should set up the GRUB so it'll load the OSes correctly from SSD? Should I fire up my Debian, fiddle with the GRUB's config and reinstall it again to the same place (at SSD)?

  Read the article

• Intermittent Trouble Entering Hibernate on WinXP

  - by kquinn

  My personal desktop, running 32-bit Windows XP SP2 (with 4GB RAM, 2.75GB addressable, swap disabled, hiberfil.sys existing and contiguous on C:\; SP3 is not installed because SP2 has been working fine and I do not want to re-qualify with SP3 just for sheer perversity) typically gets hibernated at night. For a long time this worked great, but recently the machine has had trouble entering hibernation. Sometimes when I press my power button (configured to hibernate), the box will start the procedure for hibernating (i.e., go to the blue "Windows XP" background logo and display a message about entering hibernation), but before displaying the usual blue-on-black hibernation progress bar it will drop back to the desktop. No error messages appear, on screen or in the system log. The only record of unsuccessful hibernation attempts in the system log, which proudly proclaims that "The Windows Image Acquisition (WIA) service entered the running state." once per failed hibernation attempt. The problem is almost certainly resource related: if I then close one or more applications which are running, and repeat the exact same process, the machine will hibernate perfectly. There does not appear to be a reliable high-water mark for virtual or physical memory use, below which the machine is guaranteed to hibernate; it's different every time (though typically, below about 1.1–1.4 GB memory usage seems to be where hibernate succeeds most often). Memory may not even be the relevant resource; as far as I know, it could also be handles or sockets. This behavior is relatively recent: it has only started in the last few months; before then, I could hibernate reliably no matter what the current resource use of the system. This machine claims to have hotfix Q909095 installed, but since the symptoms of my problem match KB909095 rather well, I'm suspicious if this fix is actually working as intended. Any ideas on how to fix this or where to start debugging?

  Read the article

• Serve a specific set of error pages for different subdirectories

  - by navitronic

  I am currently trying to setup 2 different sets of Error documents for separate folders within a website. I have 2 folders within the root of a site: demo/ live/ Any requests that return 404's or 403's within the demo folder needs to load one set of pages for the Apache errordocuments, eg. ErrorDocument 404 /statuses/demo-404.html ErrorDocument 403 /statuses/demo-403.html And the live needs to go to similarly name files. ErrorDocument 404 /statuses/live-404.html ErrorDocument 403 /statuses/live-403.html So far I have tried placing an .htaccess file in both directories with the ErrorDocument directives setup pointing to the specific files, the 404 works fine and references the correct page. However, the 403s do not work and revert to the server default when trying to access forbidden folders within the demo directory, the logs indicate the following: [Wed Jun 16 04:47:44 2010] [crit] [client 115.64.131.144] (13)Permission denied: /home/abstract/public_html/demo/xxx/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable Is this correct? Would apache revert to default because it is trying to look for the htaccess in a folder it doesn't have permission in? Why wouldn't it work it's way back through the folder tree? Can I make it do this?

  Read the article

• /usr/bin/install hangs, apparently due to SELinux

  - by Cooper

  I'm trying to use the GNU coreutils install utility, however it is hanging: /usr/bin/install -v test_file test_dir/ `test_file' -> `test_dir/test_file I see the same behavior whether I run as a normal user, or root/sudo. I ran an strace -f, and this is the end of the output: ... read(4, "<username>\t-d\tsystem_u:object_r:ho"..., 4096) = 2197 <0.000012> brk(0x6e3b1000) = 0x6e3b1000 <0.000009> mmap(NULL, 29138944, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2abd831ae000 <0.000014> munmap(0x2abd815dd000, 29138944) = 0 <0.003466> The read() is reading from /etc/selinux/targeted/contexts/files/file_contexts.homedirs, apparently successfully. It appears that the process is hanging right after the munmap, but continues to eat 100% CPU. My two questions are: 1) Any good way to see what is going on with the process? I'm currently too lazy to compile a debug version of install I can run gdb on - but a strong suggestion in an answer here may motivate me to do so if needed. 2) Any idea what the SELinux issue could be? I'm not too familiar with SELinux. Additional info of possible relevance: # ls -Z drwxr-xr-x my_user 7001 user_u:object_r:user_home_t test_dir -rw-r--r-- my_user 7001 user_u:object_r:user_home_t test_file # id ... context=user_u:system_r:unconfined_t # uname -a Linux hostname 2.6.18-238.1.1.el5 #1 SMP Tue Jan 4 13:32:19 EST 2011 x86_64 x86_64 x86_64 GNU/Linux I am suspicious that SELinux + Quest Authentication Services (QAS) is causing the issue. QAS is generally well behaved, but it did cause the /etc/selinux/targeted/contexts/files/file_contexts.homedirs to get quite large (~18k users, @23 lines per user) Update: install -v -Z user_u:object_r:user_home_t file dir/ seems to work. Can anyone suggest why, given that SELinux is in permissive mode (see comments).

  Read the article

• Delete cell content in Libre (Open) Office based on the cell value

  - by take2

  I have a huge csv file (tens of thousands of rows) that I need to filter based on different criteria. After trying to find a proper CSV editor, I decided to use LibreOffice Calc. CSVed is great, but it doesn't support neither UTF-8 nor macros for advanced filtering. So, there are 4 columns, 3 of which contain numbers (with decimal numbers) and 1 of which contains text. I'm trying to find a way to delete rows with a macro code. I can achieve the desired behavior with filters too, but it's annoying to type all of the filtering values over and over again and there doesn't seem to be a way to export the filter and us it repeatedly. These rows should be deleted: The ones that don't contain certain words in textual column (column A). There are a few thousand different words used in that column and I want to keep only the rows that contain one of about 30 words in that column. Additionally, the number is the other columns should be bigger than 3.8 (column B), 4.5 (column C) and smaller than 20 (column C). The row-deletion type is "Shift up". Hopefully I have explained it well. Thanks a lot in advance for your help!

  Read the article

• Missing drive space in Server 2003

  - by Tim Brigham

  I have two drives used for SQL backups which for the last week have been acting strange - the free space indicated by windows is far off from what windirstat, etc indicates. There should only be about 60 GB of drive space used and there is about 160. This would match the utilization if the two last backup files were still residing on disk. SQL server is 2000, OS Server 2003 x64. Running on a VMware 5.0 cluster. OSSEC and McAfee for this system shows clean. My current plan is to temporarily attach one of these drives this drive to another VM for analysis. Is there anything more I should be looking at? There were a lot of pages on the net when I was looking for documentation on this issue but I haven't found this case described. EDIT: Unfortunately even a full reboot did not clear this behavior. I also used process explorer to look for open file handles. No dice.

  Read the article

• Using rsync to migrate files between windows servers: problems with Excel spreadsheets

  - by HorusKol

  We've been migrating about 220 GB of data from a Windows 2003 Server to a Windows 2008 Server, and because of the time it would take to copy that data and the necessity of keeping it available for users, I came up with the idea of using rsync on an Ubuntu server to broker the migration. (I might have gone for a proper Windows solution - but the applications I found were a bit pricey for a one-shot like this - and permissions are not a problem). All well and good - and today I'm making the last sync and confirming that the new server is up-to-date using diff, but I"ve noticed an odd thing with Excel spreadsheets (.xls). Every instance of an Excel spreadsheet that has already been copied in a previous in a previous synchronisation is being marked as "already up-to-date" by rsync. However, when I then run a diff, I'm told that the files differ. I'm manually copying them, as there are but a handful, but I was wondering what might be causing this. No other filetype in the entire 220 GB tree has had any problem like this - just the Excel/xls files. It'd be great if someone could come up with an explanation.

  Read the article

• git : The remote end hung up unexpectedly - too many simultaneous users?

  - by Pritam Barhate

  I asked this first on StackOverflow and I was suggested that I should ask it here: We have a self hosted git server (Gitolite) on a VPS account (CPU:2.68GHz RAM:1824MB). This same VPS is also used to publish our underdevelopment web apps for client demos. (Very little traffic). so the main use of the server is as a Git Server Only. This git server is accessed by a team of 30-40 people for various projects. Our problem is that during the day when 6-7 people are trying to access the server (sometimes same repo) we get frequent error message: ssh: connect to host xxx.xxx.xx.xx port 22: Bad file number fatal: The remote end hung up unexpectedly After trying for 10-15 minutes it generally succeeds. During early mornings and late nights when there are only 1-2 people, git commands work with 100% success rate. Also I would like to note that if I access the other file hosted on the server through HTTP it works fine. I found a couple of questions on StackOverflow and on other sites regarding this. But most of the people point towards SSH key set up or conflicts between Msysgit and Cygns SSH. However I don't think this is the problem in our case as we get this behavior on Windows (using msysgit only) as well as Mac Machines. Also if it was SSH configuration issue then it shouldn't work at all. But in our case it works after 10-15 minutes. I think in our case it might be too many simultaneous connections to same server (or same repo) or something like that. Does there exists a setting or a conf file that needs to modified to solve this problem? Please help me solve this problem or point me in the right direction. Thanks in advance. Pritam.

  Read the article

• Windows XP Loading Problem

  - by Sadeq Dousti

  Sometimes, my Windows XP does not load correctly. It shows the login screen, and when I click my username, it load the desktop background, but the Explorer does not show up. So, I cannot see the icons on the desktop, the start menu, etc. If I press Ctrl+Alt+Del to show Task Manager, I can run programs (like media player or browser) from File--New Task (Run...). Also, in the Task Manager, I see Explorer.exe running. I tried to kill and re-run it, but nothing happens. I used Sysinternals Process Explorer to see if there were any odd process or odd behavior, but nothing was fishy. After several restarts, the system finally worked as expected. But this is not permanent: Sometimes, when I restart the system, it works just as described above (Explorer does not show up). But sometimes it works normally. I used Kaspersky to search for viruses, but nothing showed up. I think the info presented above is not enough to pinpoint the problem. Yet you might be able to tell me about a tool or something, which I can use to give you more info, or even solve the problem. PS: I can easily use the Safe Mode. It does not seem to suffer from this problem. Hence, I suspect there's some process (service) for which Explorer is waiting, but that process runs into trouble (say a race ondition, or an infinite loop) and so Explorer stalls as well.

  Read the article

• In Windows 7, why won't my display stay off despite the power settings saying it should?

  - by Jer

  I'm completely stumped by this. My simple use case is that when I'm in bed, I use a cordless mouse to browse the web, watch videos, etc. - the monitor is across the room. When I'm going to sleep, I want to shut the monitor off. I also want to be able to turn it back on in the morning. I just want to turn the monitor off and on using only the mouse. I thought of creating a power setting that turned the monitor off asap (the shortest amount of time is one minute; that's fine). I have one that does this. It worked great for almost a year on my old XP machine, and for about four months on my new Windows 7 laptop (which I essentially use as a desktop). All of a sudden a couple weeks ago, it just stopped working - my monitor won't turn off on its own anymore. Here are the settings: I tried other options. Based on the advice here I tried nircmd. This seemed great. I created a shortcut with the command line: "C:\Program Files\nircmd\nircmd.exe" cmdwait 1000 monitor off I click this, and in one second the monitor goes off. However about five seconds later it turns back on, and I've been extra careful to make sure the mouse isn't moving. I have no idea what's going on. Based on both of these things, my only guess is that something could be running in the background which somehow makes the computer think it's in use. I've tried killing as many programs as possible but I still get the same behavior. Any advice? I'm mainly curious about how to debug, but am open to other suggestions about turning the monitor off and on with just the mouse as well.

  Read the article

• Issues connecting to HP ProCurve switches

  - by BriGuy

  We are having a very strange issue trying to connect to our infrastructure switches via SSH. When you first try connecting to them, the switches will prompt for the password - and then just sit there after it is entered. If you create a second SSH session to the switch (while letting the first one remain open and just sitting there) it will let you log right in. The switches are doing the same thing with RADIUS and local authentication. The other strange part to all of this, is that about 10 switches started doing it all at the same time. As far as actual configuration of the switches, nothing has changed. Occasionally, one switch will start working like normal, but then stop again. These are all HP ProCurve managed switches, but all different models/firmware. Some switches that are not working are using the same firmware as others that are working. UPDATE: 20130312 I am also seeing this same behavior when trying to use telnet. The first telnet session just hangs there, and the second telnet session will let me log in. Rebooting the switches seems to get them working, but I still have 5 production switches that cannot easily be rebooted because of their production roles. Is anyone aware of anything else that can be switched on/off that may reset the logon for remote management or something like that?

  Read the article

• How does Firefox sync really work (when adding new devices)?

  - by tim11g

  I'm adding some less frequently used computers to my Firefox sync account. These computers were previously synced using Foxmarks BYOS. When I started using Firefox Sync, I deleted some old bookmarks. Later, as I added some other machines, old bookmarks (that still existed on the other machines) were synced back to my main machine. To prevent that from happening, I wonder if I perhaps need to delete all the bookmarks from new machines before adding them to the Sync account. But then I worry that it might sync the deletion of all the bookmarks and delete them all from the server and my other machines. Is there any documentation on the exact syncing behavior in the case of adding new devices? Is there any way to monitor progress and sync status? Is there any way to cause a "one way" sync for first time connection (sync server to browser only, overwriting everything in the browser? Is there any way to see a list of devices that are associated, and the last time they have synced? Thanks!

  Read the article

• How do you apply proxy settings per computer instead of per user?

  - by Oliver Salzburg

  So far, I've used a user group policy object utilizing Internet Explorer maintenance to set a proxy for the user in IE. We have now deployed the Enterprise Client (EC) starter group policy to our domain and this policy affects this behavior. The EC group policy uses the policy Make proxy settings per-machine (rather than per-user). This policy describes itself as: This policy is intended to ensure that proxy settings apply uniformly to the same computer and do not vary from user to user. Great! This seems to be an improvement over my previous setup. If you enable this policy, users cannot set user-specific proxy settings. They must use the zones created for all users of the computer. What zones and where do I configure the proxy settings for them? I assumed the policy would simply take the user settings and apply them, but that's not what's happening. Now no proxy server is set at all. So my previous settings obviously no longer have any effect. So far, I've only come up with solutions that involved direct manipulation of the Windows registry. Which is fine, I guess, but the way the proxy is configured for users makes it appear as if there could be a higher level approach.

  Read the article

• SSLVerifyClient optional with location-based exceptions

  - by Ian Dunn

  I have a site that requires authentication in order to access certain directories, but not others. (The "directories" are really just rewrite rules that all pass through /index.php) In order to authenticate, the user can either login with a standard username/password, or submit a client-side x509 certificate. So, Apache's vhost conf looks something like this: SSLCACertificateFile /etc/pki/CA/certs/redacted-ca.crt SSLOptions +ExportCertData +StdEnvVars SSLVerifyClient none SSLVerifyDepth 1 <LocationMatch "/(foo-one|foo-two|foo-three)"> SSLVerifyClient optional </LocationMatch> That works fine, but then large file uploads fail because of the behavior documented in bug 12355. The workaround for that is to set SSLVerifyClient require (or optional) as the default, so now the conf looks like this SSLCACertificateFile /etc/pki/CA/certs/redacted-ca.crt SSLOptions +ExportCertData +StdEnvVars SSLVerifyClient optional SSLVerifyDepth 1 <LocationMatch "/(bar-one|bar-two|bar-three)"> SSLVerifyClient none </LocationMatch> That fixes the upload problem, but the SSLVerifyClient none doesn't work for bar-one, bar-two, etc. Those directories are still prompted to present a certificate. Additionally, I also need the root URL to accessible without the user being prompted for a certificate. I'm afraid that will cancel out the workaround, though.

  Read the article

• Windows Explorer and UAC: run elevated

  - by syneticon-dj

  I am profoundly annoyed by UAC and switch it off for my admin user wherever I can. Yet, there are situations where I can't - especially if those are machines not under my continuous administration. In this case, I am always challenged with the task of traversing directories using my administrative user via the Windows Explorer where regular users do not have "read" permissions. The possible two approaches to this problem so far: change the ACLs to the directory in question to include my user (Windows conveniently offers the Continue button in the "You don't currently have permissions to access this folder" dialog. This obviously sucks since more often than not I do not want to change ACLs but just look into the folder's contents use an elevated cmd.exe prompt along with a bunch of command line utilities - this usually takes a lot of time when browsing through large and / or complex directory structures What I would love to see would be a way to run Windows Explorer in elevated mode. I have yet to find out how to do so. But other suggestions solving this problem in an unobtrusive way without changing the entire system's configuration (and preferably without the need for downloading / installing anything) are very welcome, too. I have seen this post with a suggestion for altering HKCR - interesting, but it changes the behavior for all users, which I am not allowed to do in most situations. Also, some folks have suggested using UNC paths to access the folders - unfortunately this does not work when accessing the same machine (i.e. \\localhost\c$\path) as the "Administrators" group membership is still stripped from the token and a re-authentication (and thus the creation of a new token) would not happen when accessing localhost.

  Read the article

• pam_tally2 causing unwanted lockouts with SCOM or Nervecenter

  - by Chris

  We use pam_tally2 in our system-auth config file which works fine for users. With services such as SCOM or Nervecenter it causes lockouts. Same behavior on RHEL5 and RHEL6 This is /etc/pam.d/nervecenter #%PAM-1.0 # Sample NerveCenter/RHEL6 PAM configuration # This PAM registration file avoids use of the deprecated pam_stack.so module. auth include system-auth account required pam_nologin.so account include system-auth and this is /etc/pam.d/system-auth auth sufficient pam_centrifydc.so auth requisite pam_centrifydc.so deny account sufficient pam_centrifydc.so account requisite pam_centrifydc.so deny session required pam_centrifydc.so homedir password sufficient pam_centrifydc.so try_first_pass password requisite pam_centrifydc.so deny auth required pam_tally2.so deny=6 onerr=fail auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so account required pam_unix.so account sufficient pam_succeed_if.so uid < 500 quiet account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 minclass=3 minlen=8 lcredit=1 ucredit=1 dcredit=1 ocredit=1 difok=1 password sufficient pam_unix.so sha512 shadow try_first_pass use_authtok remember=8 password required pam_deny.so session optional pam_keyinit.so revoke session required pam_limits.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so The login does work but it also triggers the pam_tally counter up until it hits 6 "false" logins. Is there any pam-ninjas around that could spot the issue? Thanks.

  Read the article

• Deploy our own software using Puppet?

  - by Ken

  (Apologies in advance for the stupidity in this question. I'm normally a programmer, not a sysadmin, but I've taken it upon myself to automate some things, and clean up some other things which are automated but not in the prettiest way. :-) I've been looking around at various tools for automation of software deployment to a bunch of servers, like cfengine, Puppet, and Chef. So far, Puppet looks the most appealing, but I've certainly not committed to anything yet. These tools all look like they can do a great job of keeping a bunch of servers up-to-date with prepackaged software. What I don't get is: how does one use a tool (like Puppet) to manage deployments of our own internal software? I think I'm at a loss because I've seen a thousand tutorials showing how to keep Apache ensure => latest (which is pretty cool), but nothing that quite corresponds to my use-case today, which is something more like: when a human being pushes The Button, pull branch A from the version-control repository B run command C to compile it copy the binaries D to servers E1 through E10 on each server, run command F to make all changes take effect Puppet sounds great, and I totally see the advantage of declarative, idempotent configuration over some shell scripts, but I've not seen any tutorials for "you want to update your shell scripts to Puppet (or Chef, or cfengine) so here's what you should do". Is there such a thing? Is it obvious to other people how to take the things provided in the Puppet docs and replicate the behavior I want? Am I just not getting it? What it's sounding like to me, so far, is that the human being (#1) would manually package the software (#2 and #3) external to Puppet, manually update the Puppet config, which would trigger Puppet to update the servers ... maybe? (I'm a little confused here, as I'm sure you can tell.) Thanks!

  Read the article

• Windows media scaling/interpolation method

  - by MichaelH

  Usually in Windows, if videos or other media is upscaled from a certain resolution to a higher resolution (e.g. "monitor size"), a bilinear filtering algorithm or similar is used, such that the upscaled material doesn't look blocky. On my system however, the used interpolation algorithm changed from 'bilinear' to 'nearest neighbor' at some point, with the effect that upscaled videos (e.g. viewed in MPC or WMP, and also Skype video streams) and games (e.g. from PopCap) appear rather blocky. Not sure what the common factor between those is, could be DirectShow(?). I am not aware of having changed any setting that could have affected this state, in fact I am not even aware such a setting exists. I'm guesing that some installed software must have changed something on my computer. My computer is running Windows 7, but I had already experienced the same effect on an XP machine some while ago, where it changed back again to the more pleasing bilinear interpolation after a while, as magically as the first time. What could be wrong with this installation, and how can I change this upscaling interpolation behavior?

  Read the article

• How to see the properties of a DOM element as they change in realtime?

  - by allquixotic

  JavaScript code can update the properties/attributes of DOM elements in real time by responding to events and so on. Here is an example. In the table on that page, move your mouse over the cells. Notice how they change color when the mouse is on them, and the color goes away when you move the mouse to another cell. Now, using Firefox or Chrome (but not IE, Opera, etc.), I want to examine the background color, expressed in RGB or hex or whatever, of the cells updated in real time, as the mouse cursor enters and leaves the region and causes the JS to do its thing. The behavior that I observe, currently, is that the Inspect Element functionality of both Firefox and Chrome does not update the value of the properties as they are updated by JavaScript. So, in order to view the latest value of the property, I have to inspect the element again, and it takes a momentary "snapshot" of the values. But since the values only change while I have the mouse on them, I can't take a snapshot of the value I want while my mouse cursor is over the cell, because I have to remove my mouse from the cell to select the "Inspect Element" item in the right-click list! If it is possible to have the values updated in real time using either Firefox or Chrome, or an extension, on any recent version of the software (up to the latest stable), please provide instructions for doing so.

  Read the article

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >