Search Results

Search found 47469 results on 1899 pages for 'auto generated value'.

Page 313/1899 | < Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >

  • DHCP server with multiple interfaces on ubuntu, destroys default gateway

    - by Henrik Alstad
    I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

    Read the article

  • Why does my MySQL remote-connection fail (VLAN)?

    - by Johannes Nielsen
    ubuntu-community! Again I have a problem with my special friend MySQL :D I have got two servers - a database-server and a web-server - who are connected via VLAN. Now I want the web-server to have remote access to the database-server's MySQL. So I created the user user in mysql.user. user's Host is xxx.yyy.zzz.9 which is the internal IP-address of the web-server. xxx.yyy.zzz.0 is the network. I also created user with Host % . As long as I use MySQL on the database-server logging in as user, everything works fine. But trying to log in as user from xxx.yyy.zzz.9 using mysql -h xxx.yyy.zzz.8 -u user -p (where xxx.yyy.zzz.8 is the database-server's internal IP), I get ERROR 2003 (HY000): Can't connect to MySQL server on 'xxx.yyy.zzz.8' (110) So I tried to activate Bind-Address in the my.cnf file. Well, if I use xxx.yyy.zzz.8, nothing changes. But if I try xxx.yyy.zzz.9 and try to restart MySQL, I get mysql stop/waiting start: Job failed to start I checked the log files and found - nothing. The database-server's MySQL doesn't even register, that the web-server tries to connect remotely. My idea is, that maybe I didn't configure the VLAN properley, even though I asked someone who actually knows such stuff and he told me, I did everything right. What I wrote into /etc/networking/interfaces is: #The VLAN auto eth1 iface eth1 inet static address xxx.yyy.zzz..8 netmask 255.255.255.0 network xxx.yyy.zzz.0 broadcast xxx.yyy.zzz.255 mtu 1500 ifconfig returns eth1 Link encap:Ethernet HWaddr xxxxxxxxxxxxxx inet addr:xxx.yyy.zzz.8 Bcast:xxx.yyy.zzz.255 Mask:255.255.255.0 inet6 addr: xxxxxxxxxxxxxxx/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:241146 errors:0 dropped:0 overruns:0 frame:0 TX packets:9765 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:17825995 (17.8 MB) TX bytes:566602 (566.6 KB) Memory:fb900000-fb920000 for the eth1, what is, what I configured. (This is for the database-server, the web-server looks similar). ethtool eth1 returns: Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000003 (3) drv probe Link detected: yes (This is for the database-server, the web-server looks similar). Actually I think, everything is right, but it still doesn't work. Is there someone with an idea? EDIT: I commented ou Bind-Address in my.cnf after it didn't work.

    Read the article

  • SQL SERVER – Three Puzzling Questions – Need Your Answer

    - by pinaldave
    Last week I had asked three questions on my blog. I got very good response to the questions. I am planning to write summary post for each of three questions next week. Before I write summary post and give credit to all the valid answers. I was wondering if I can bring to notice of all of you this week. Why SELECT * throws an error but SELECT COUNT(*) does not This is indeed very interesting question as not quite many realize that this kind of behavior SQL Server demonstrates out of the box. Once you run both the code and read the explanation it totally makes sense why SQL Server is behaving how it is behaving. Also there is connect item is associated with it. Also read the very first comment by Rob Farley it also shares very interesting detail. Statistics are not Updated but are Created Once This puzzle has multiple right answer. I am glad to see many of the correct answer as a comment to this blog post. Statistics are very important and it really helps SQL Server Engine to come up with optimal execution plan. DBA quite often ignore statistics thinking it does not need to be updated, as they are automatically maintained if proper database setting is configured (auto update and auto create). Well, in this question, we have scenario even though auto create and auto update statistics are ON, statistics is not updated. There are multiple solutions but what will be your solution in this case? When to use Function and When to use Stored Procedure This question is rather open ended question – there is no right or wrong answer. Everybody developer has always used functions and stored procedures. Here is the chance to justify when to use Stored Procedure and when to use Functions. I want to acknowledge that they can be used interchangeably but there are few reasons when one should not do that. There are few reasons when one is better than other. Let us discuss this here. Your opinion matters. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Performance, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLAuthority News, SQLServer, T SQL, Technology

    Read the article

  • TechEd 2012 - day 3

    - by Stefan Barrett
    The content has got more useful for me as a developer, and I've now seen 2 things which I think will make a big difference: Fake in vs2012 - allows me to stub or fake out libraries making unit testing easier/possible. C++ AMP & auto - auto might get me to start using c++ again (it makes code like for each much nicer/easier to write), while AMP is something I want to play with (moves the processing onto the GPU) The food got a little better, while there was less sign of the snacks.

    Read the article

  • unable to read/write CIFS mounts in Ubuntu 11.10

    - by Paul Collins
    upgraded my laptop from 11.04 too 11.10 and since then the CIFS mounts are not working before the upgrade it would allow mounts on host names, in 11.10 its only IP addresses (not much of an issue) however all the shares i mount are as Read only despite the FStab File declaring the options rw and auto, i have chowned the mount point to be nogroup.nouser and it still wont work, here is an extract from my FSTAB: //192.168.1.1/stories /home/paul/Documents/Stories cifs rw,user,exec,auto,username=,password= 0 0

    Read the article

  • SQL SERVER – Preserve Leading Zero While Coping to Excel from SSMS

    - by pinaldave
    Earlier I wrote two articles about how to efficiently copy data from SSMS to Excel. Since I wrote that post there are plenty of interest generated on this subject. There are a few questions I keep on getting over this subject. One of the question is how to get the leading zero preserved while copying the data from SSMS to Excel. Well it is almost the same way as my earlier post SQL SERVER – Excel Losing Decimal Values When Value Pasted from SSMS ResultSet. The key here is in EXCEL and not in SQL Server. The step here is to change the format of Excel Cell to Text from Numbers and that will preserve the value of the with leading or trailing Zeros in Excel. However, I assume this is done for display purpose only because once you convert column to Text you may find it difficult to do numeric operations over the column for example Aggregation, Average etc. If you need to do the same you should either convert the columns back to Numeric in Excel or do the process in Database and export the same value as along with it as well. However, I have seen in requirement in the real world where the user has to have a numeric value with leading Zero values in it for display purpose. Here is my suggestion, instead of manipulating numeric value in the database and converting it to character value the ideal thing to do is to store it as a numeric value only in the database. Whatever changes you want to do for display purpose should be handled at the time of the display using the format function of SQL or Application Language. Honestly, database is data layer and presentation is presentation layer – they are two different things and if possible they should not be mixed. If due to any reason you cannot follow above advise and you need is to have append leading zeros in the database only here are two of my previous articles I suggest you to refer them. I am open to learn new tricks as these articles are almost three years old. Please share your opinion and suggestions in the comments area. SQL SERVER – Pad Ride Side of Number with 0 – Fixed Width Number Display SQL SERVER – UDF – Pad Ride Side of Number with 0 – Fixed Width Number Display Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Excel

    Read the article

  • Apostrophe in fstab

    - by Hamy
    Can's get a window's directory to mount due to an apostrophe. The relevant bit of fstab: # Auto-mount windows drive UUID=0C1C51021C50E86A /media/windows ntfs defaults 0 0 # Auto-mount the Music folder /media/windows/Documents\040and\040Settings/Foo\040Name/My\040Documents/My\040Music/Foo's\040Music /home/foo/Music none bind 0 0 Note that I'm using the \040 to escape spaces, but man ascii doesn't (from what I see) have an escape character for a '. I've tried \047 to no avail Thoughts?

    Read the article

  • Adding Column to a SQL Server Table

    - by Dinesh Asanka
    Adding a column to a table is  common task for  DBAs. You can add a column to a table which is a nullable column or which has default values. But are these two operations are similar internally and which method is optimal? Let us start this with an example. I created a database and a table using following script: USE master Go --Drop Database if exists IF EXISTS (SELECT 1 FROM SYS.databases WHERE name = 'AddColumn') DROP DATABASE AddColumn --Create the database CREATE DATABASE AddColumn GO USE AddColumn GO --Drop the table if exists IF EXISTS ( SELECT 1 FROM sys.tables WHERE Name = 'ExistingTable') DROP TABLE ExistingTable GO --Create the table CREATE TABLE ExistingTable (ID BIGINT IDENTITY(1,1) PRIMARY KEY CLUSTERED, DateTime1 DATETIME DEFAULT GETDATE(), DateTime2 DATETIME DEFAULT GETDATE(), DateTime3 DATETIME DEFAULT GETDATE(), DateTime4 DATETIME DEFAULT GETDATE(), Gendar CHAR(1) DEFAULT 'M', STATUS1 CHAR(1) DEFAULT 'Y' ) GO -- Insert 100,000 records with defaults records INSERT INTO ExistingTable DEFAULT VALUES GO 100000 Before adding a Column Before adding a column let us look at some of the details of the database. DBCC IND (AddColumn,ExistingTable,1) By running the above query, you will see 637 pages for the created table. Adding a Column You can add a column to the table with following statement. ALTER TABLE ExistingTable Add NewColumn INT NULL Above will add a column with a null value for the existing records. Alternatively you could add a column with default values. ALTER TABLE ExistingTable Add NewColumn INT NOT NULL DEFAULT 1 The above statement will add a column with a 1 value to the existing records. In the below table I measured the performance difference between above two statements. Parameter Nullable Column Default Value CPU 31 702 Duration 129 ms 6653 ms Reads 38 116,397 Writes 6 1329 Row Count 0 100000 If you look at the RowCount parameter, you can clearly see the difference. Though column is added in the first case, none of the rows are affected while in the second case all the rows are updated. That is the reason, why it has taken more duration and CPU to add column with Default value. We can verify this by several methods. Number of Pages The number of data pages can be obtained by using DBCC IND command. Though, this an undocumented dbcc command, many experts are ok to use this command in production. However, since there is no official word from Microsoft, use this “at your own risk”. DBCC IND (AddColumn,ExistingTable,1) Before Adding the Columns 637 Adding a Column with NULL 637 Adding a column with DEFAULT value 1270 This clearly shows that pages are physically modified. Please note, a high value indicated in the Adding a column with DEFAULT value  column is also a result of page splits. Continues…

    Read the article

  • Filtering option list values based on security in UCM

    - by kyle.hatlestad
    Fellow UCM blog writer John Sim recently posted a comment asking about filtering values based on the user's security. I had never dug into that detail before, but thought I would take a look. It ended up being tricker then I originally thought and required a bit of insider knowledge, so I thought I would share. The first step is to create the option list table in Configuration Manager. You want to define the column for the option list value and any other columns desired. You then want to have a column which will store the security attribute to apply to the option list value. In this example, we'll name the column 'dGroupName'. Next step is to create a View based on the new table. For the Internal and Visible column, you can select the option list column name. Then click on the Security tab, uncheck the 'Publish view data' checkbox and select the 'Use standard document security' radio button. Click on the 'Edit Values...' button and add the values for the option list. In the dGroupName field, enter the Security Group (or Account if you use Accounts for security) to apply to that value. Create the custom metadata field and apply the View just created. The next step requires file system access to the server. Open the file [ucm directory]\data\schema\views\[view name].hda in a text editor. Below the line '@Properties LocalData', add the line: schSecurityImplementorColumnMap=dGroupName:dSecurityGroup The 'dGroupName' value designates the column in the table which stores the security value. 'dSecurityGroup' indicates the type of security to check against. It would be 'dDocAccount' if using Accounts. Save the file and restart UCM. Now when a user goes to the check-in page, they will only see the options for which they have read and write privileges to the associated Security Group. And on the Search page, they will see the options for which they have just read access. One thing to note is if a value that a user normally can't view on Check-in or Search is applied to a document, but the document is viewable by the user, the user will be able to see the value on the Content Information screen.

    Read the article

  • A way to return multiple return values from a method: put method inside class representing return value. Is it a good design?

    - by john smith optional
    I need to return 2 values from a method. My approach is as follows: create an inner class with 2 fields that will be used to keep those 2 values put the method inside that class instantiate the class and call the method. The only thing that will be changed in the method is that in the end it will assign those 2 values to the fields of the instance. Then I can address those values by referencing to the fields of that object. Is it a good design and why?

    Read the article

  • Share on: FB, Tweet, Digg, Linkedin, Delicious, My mother, ... it's just on fashion, or some real value?

    - by Marco Demaio
    Nowadays your site is not in fashion if you don't show at least a couple of share buttons like these: Is this just fashion, or do people actually get something good out of it? When I say "something good" I mostly mean something that you could measure, and not just the feeling that was good. Maybe I can better explain with an example: did you notice (in some way) that many people clicked on those links to share your page/s on those web 2.0 social sites? And in such a case on which social networks did you see they mostly share your pages? BTW I'm not talking about Google PR, i know all web 2.0 social sites use nofollow everywhere and even hidden links, so they are useless by themselves for PR. UPDATE: According to this video, Google's Alter Ego says that they now use in some way data from social sites in ranking. If this is true, it's obvious that the Share on button for FB, Tweet, etc are definitely of some values. But again my question is more about what you noticed in your real experience to be a direct benefit of adding those type of "Share On" links on your webisite? I.e. did you see more traffic coming in form FB, or some users who bought your products because of FB or Twitter? Or any other benefits? Thanks

    Read the article

  • How do I change the background colour of Leafpad?

    - by Lao Tzu
    All the information that google returns says to change ~/.gtkrc2.0-mine. Here is my .gtkrc-2.0: # -- THEME AUTO-WRITTEN BY gtk-theme-switch2 DO NOT EDIT include "/usr/share/themes/Dust/gtk-2.0/gtkrc" include "/home/mars/.gtkrc-2.0.mine" # -- THEME AUTO-WRITTEN BY gtk-theme-switch2 DO NOT EDIT Here is my .gtkrc-2.0.mine: style "default" { GtkTextView::cursor_color = "#ffffff" base[NORMAL] = "#111111" base[ACTIVE] = "#111181" base[SELECTED] = "#808080" text[NORMAL] = "#c0c0c0" text[ACTIVE] = "#c0c0c0" text[SELECTED] = "#111111" } class "GtkTextView" style "default" Still appears with a white background!

    Read the article

  • Can't save data for a member in a data form

    - by RahulS
    Implied sharing is an old thing everyone knows the reasons and solutions of that, still little theory about that: With Essbase implied sharing, some members are shared even if you do not explicitly set them as shared. These members are implied shared members. When an implied share relationship is created, each implied member assumes the other member’s value. Essbase assumes (or implies) a shared member relationship in these situations: 1. A parent has only one child 2. A parent has only one child that consolidates to the parent In a Planning form that contains members with an implied sharing relationship, when a value is added for the parent, the child assumes the same value after the form is saved. Likewise, if a value is added for the child, the parent usually assumes the same value after a form is saved.For example, when a calculation script or load rule populates an implied share member, the other implied share member assumes the value of the member populated by the calculation script or load rule. The last value calculated or imported takes precedence. The result is the same whether you refer to the parent or the child as a variable in a calculation script. For more information have a look at: http://docs.oracle.com/cd/E17236_01/epm.1112/hp_admin_11122/ch14s11.html Now the issue which we are going to talk about is We loose data on save even when the parent is dynamic calc and has a single child. A dynamic calc parent to a single child:  If we design the form with following selection: In the data form we will find parent below the member and this is by design whenever you make a selection using commands to select all the member below parent, always children will appear before the parent: Lets try to enter data, Save it Now, try to change the way we selected members Here we go: Now the question again why this behavior: 1. Data from Planning data form passes to Essbase row by row, 2. Because in data form the child member appears before the parent, 3. First, data goes to Essbase for child (SingleStoreChild), 4. Then when Planning passes the data for parent there was #Missing or No data,  5. Over writes the data to #missing. PS: As we know that dynamic calc members are calculated on the fly they are not allocated with any memory in the Essbase, here the parent was dynamic calc and it was pointing to same memory as child in the background, when Planning was passing data to Essbase for second row it has updated the child with missing data.(Little confusing, let me know if you need more explanation) 6. As one of the solutions just change the order of appearance of parent and child. Cheers..!!! Rahul S. https://www.facebook.com/pages/HyperionPlanning/117320818374228

    Read the article

  • Bullet Physics - Casting a ray straight down from a rigid body (first person camera)

    - by Hydrocity
    I've implemented a first person camera using Bullet--it's a rigid body with a capsule shape. I've only been using Bullet for a few days and physics engines are new to me. I use btRigidBody::setLinearVelocity() to move it and it collides perfectly with the world. The only problem is the Y-value moves freely, which I temporarily solved by setting the Y-value of the translation vector to zero before the body is moved. This works for all cases except when falling from a height. When the body drops off a tall object, you can still glide around since the translate vector's Y-value is being set to zero, until you stop moving and fall to the ground (the velocity is only set when moving). So to solve this I would like to try casting a ray down from the body to determine the Y-value of the world, and checking the difference between that value and the Y-value of the camera body, and disable or slow down movement if the difference is large enough. I'm a bit stuck on simply casting a ray and determining the Y-value of the world where it struck. I've implemented this callback: struct AllRayResultCallback : public btCollisionWorld::RayResultCallback{ AllRayResultCallback(const btVector3& rayFromWorld, const btVector3& rayToWorld) : m_rayFromWorld(rayFromWorld), m_rayToWorld(rayToWorld), m_closestHitFraction(1.0){} btVector3 m_rayFromWorld; btVector3 m_rayToWorld; btVector3 m_hitNormalWorld; btVector3 m_hitPointWorld; float m_closestHitFraction; virtual btScalar addSingleResult(btCollisionWorld::LocalRayResult& rayResult, bool normalInWorldSpace) { if(rayResult.m_hitFraction < m_closestHitFraction) m_closestHitFraction = rayResult.m_hitFraction; m_collisionObject = rayResult.m_collisionObject; if(normalInWorldSpace){ m_hitNormalWorld = rayResult.m_hitNormalLocal; } else{ m_hitNormalWorld = m_collisionObject->getWorldTransform().getBasis() * rayResult.m_hitNormalLocal; } m_hitPointWorld.setInterpolate3(m_rayFromWorld, m_rayToWorld, m_closestHitFraction); return 1.0f; } }; And in the movement function, I have this code: btVector3 from(pos.x, pos.y + 1000, pos.z); // pos is the camera's rigid body position btVector3 to(pos.x, 0, pos.z); // not sure if 0 is correct for Y AllRayResultCallback callback(from, to); Base::getSingletonPtr()->m_btWorld->rayTest(from, to, callback); So I have the callback.m_hitPointWorld vector, which seems to just show the position of the camera each frame. I've searched Google for examples of casting rays, as well as the Bullet documentation, and it's been hard to just find an example. An example is really all I need. Or perhaps there is some method in Bullet to keep the rigid body on the ground? I'm using Ogre3D as a rendering engine, and casting a ray down is quite straightforward with that, however I want to keep all the ray casting within Bullet for simplicity. Could anyone point me in the right direction? Thanks.

    Read the article

  • Optimizing Transaction Log Throughput

    As a DBA, it is vital to manage transaction log growth explicitly, rather than let SQL Server auto-growth events "manage" it for you. If you undersize the log, and then let SQL Server auto-grow it in small increments, you'll end up with a very fragmented log. Examples in the article, extracted from SQL Server Transaction Log Management by Tony Davis and Gail Shaw, demonstrate how this can have a significant impact on the performance of any SQL Server operations that need to read the log.

    Read the article

  • C++11 Tidbits: Decltype (Part 2, trailing return type)

    - by Paolo Carlini
    Following on from last tidbit showing how the decltype operator essentially queries the type of an expression, the second part of this overview discusses how decltype can be syntactically combined with auto (itself the subject of the March 2010 tidbit). This combination can be used to specify trailing return types, also known informally as "late specified return types". Leaving aside the technical jargon, a simple example from section 8.3.5 of the C++11 standard usefully introduces this month's topic. Let's consider a template function like: template <class T, class U> ??? foo(T t, U u) { return t + u; } The question is: what should replace the question marks? The problem is that we are dealing with a template, thus we don't know at the outset the types of T and U. Even if they were restricted to be arithmetic builtin types, non-trivial rules in C++ relate the type of the sum to the types of T and U. In the past - in the GNU C++ runtime library too - programmers used to address these situations by way of rather ugly tricks involving __typeof__ which now, with decltype, could be rewritten as: template <class T, class U> decltype((*(T*)0) + (*(U*)0)) foo(T t, U u) { return t + u; } Of course the latter is guaranteed to work only for builtin arithmetic types, eg, '0' must make sense. In short: it's a hack. On the other hand, in C++11 you can use auto: template <class T, class U> auto foo(T t, U u) -> decltype(t + u) { return t + u; } This is much better. It's generic and a construct fully supported by the language. Finally, let's see a real-life example directly taken from the C++11 runtime library as implemented in GCC: template<typename _IteratorL, typename _IteratorR> inline auto operator-(const reverse_iterator<_IteratorL>& __x, const reverse_iterator<_IteratorR>& __y) -> decltype(__y.base() - __x.base()) { return __y.base() - __x.base(); } By now it should appear be completely straightforward. The availability of trailing return types in C++11 allowed fixing a real bug in the C++98 implementation of this operator (and many similar ones). In GCC, C++98 mode, this operator is: template<typename _IteratorL, typename _IteratorR> inline typename reverse_iterator<_IteratorL>::difference_type operator-(const reverse_iterator<_IteratorL>& __x, const reverse_iterator<_IteratorR>& __y) { return __y.base() - __x.base(); } This was guaranteed to work well with heterogeneous reverse_iterator types only if difference_type was the same for both types.

    Read the article

  • Storage device manger regarding NTFS automount at boot time

    - by muneesh
    I am using storage device manager to auto-mount NTFS file system at boot time.But repeatedly, I am trying to uncheck the checkbox listed 'read only mode' in assistant option of storage device manager. I am not able to to auto-mount my NTFS partition in read/write mode. Please suggest a solution regarding this problem? Remember I am repeatedly trying to uncheck read only checkbox but not able to do that!

    Read the article

  • Install Script Question

    - by Michael Dobbins
    Sorry if this has been discussed, wasn't sure what to use to search for the particular question I had. I'm installing sickrage and couchpotato and headphones, and will be doing multiple installs I made a small batch script just to install everything but what I don't know how to do is automatically make them auto start on boot. Since they all require a file to be created I do not know how to make this file auto create and populate what needs to be put into it.

    Read the article

  • Optimizing Transaction Log Throughput

    As a DBA, it is vital to manage transaction log growth explicitly, rather than let SQL Server auto-growth events "manage" it for you. If you undersize the log, and then let SQL Server auto-grow it in small increments, you'll end up with a very fragmented log. This article demonstrates how this can have a significant impact on the performance of any SQL Server operations that need to read the log.

    Read the article

  • Oracle EBS?????(Order->AR)

    - by Pan.Tian
    ???? ??:Order Management > Orders,Returns > Sales Orders ???????,??,????,???? ???????,????,??... ??Book Order,??Book??,????????Status??????“Booked”,???????"Awaiting Shipping",?????????,??????????????? ??:??Book??,????????????,????Shipping Transactions Form,????,?????????Line Status?Ready to Release,Next Step?Pick Release Pick Release ??:Order Management > Shipping > Release Sales Orders > Release Sales Orders Pick Release????(?????????).?Order  Number?????????? Auto Pick Confirm???No Auto Allocate???N Auto Allocate?Auto Pick Confirm??????Yes,???????????,??????No,???Yes??,?????Allocate?Pick Confirm??,??????????? ??????????Pick  Release,”Concurrent“??Pick Release?????Concurrent Request???,"Execute Now"????????Pick Release,??????????????User,??????Concurrent??? Pick Release?????????Pick Release?????Pick Wave??Move Order,??Move Order????????????????????(Staging),????INV??????????? INV_MOVE_ORDER_PUB.CREATE_MOVE_ORDER_HEADER???Move Order??(??Pick Release?????????????:Pick Release Process) ????????,?Pick Release??,?????????????Reservation(??),?????????Soft Reservations,?????????????,????Org?????????? ??:????,Shipping Transaction?Line Status?"Released to Warehouse",Next Step?"Transact Move Order";????????Booked,?????”Awaiting Shipping“? Pick Confirm Pick Confirm(????)????????Transact Move Order????,?Allocate????,?Transact Move Order. ??:Inventory > Move Orders > Transact Move Orders ????,Pick Wave??Tab,????? ??TMO????,??Allocate,Allocate?????????Picking Rule?????,??????Suggestion????,Suggestion?????? MTL_MATERIAL_TRANSACTIONS_TEMP?(?Pending Transactions)? ????Allocate??,??????Allocation????Single,Multiple??None???,Single??, ??????????Suggestion?Transaction??,Multiple???????;None??????Suggestion? ?(????????????????) ????????Transact??Move Order ?Transact??,Inventory Transaction Manager ???Suggestion Transactions(MMTT),???????????????,??????Subinventory??????(Staging)??? Transction???Material Transaction?Form????? ????Reservation??,?Transact??,???????,Reservation????????,????Sub,locator???? ??:????,Shipping Transaction?Line Status?"Staged/Pick Confirmed",Next Step?"Ship Confirm/Close Trip Stop";????????Booked,??????”Picked“? Ship Confirm Deliveries ??:Order Management > Shipping > Transactions ???Delivery??,??Ship Confirm(????),????Pick Release???,????Autocreate Delivery,???????Define Shipping Parameters????????,??shipping parameters???????,?????????Ship Confirm?????Action->Auto-create Deliveries. Delivery????????????????,????????.... Delivery??,??Ship Confirm???,???????,"Defer Interface"?????,?????????Interface Trip Stop SRS,????Defer Interface,?OK? Delivery was successfully confirmed!!! Ship Confirm????????????MTL_TRANSACTIONS_INTERFACE??,??MTI??????Sales Order Issue,??????????Interface Trip Stop???,???MTI??MMT??? ??:????,Shipping Transaction?Line Status?"Shipped",Next Step?"Run Interfaces";????????Booked,??????”Shipped“? Interface Trip Stop - SRS ?????Ship Confirm??????Defer Interface,??????????????Interface Trip Stop - SRS? ??:Order Management > Shipping > Interface > Run > Request:Interface Trip Stop - SRS Interface Trip Stop????????:Inventory Interface  SRS(????????)? Order Management Interface  SRS(?????????????AR??)? Inventory Interface  SRS???Shipping Transaction??????MTI,??INV Manager????MTI????MMT??,??Sales Order Issue?transaction??????,???????????Reservation????Inventory Interface  SRS?????,???WSH_DELIVERY_DETAILS??INV_INTERFACED_FLAG???Y? Order Management Interface - SRS??Inventory Interface  SRS?????,??Request?????????????AR??,OM Interface????????WSH_DELIVERY_DETAILS??OE_INTERFACED_FLAG?Y? ??:????,Shipping Transaction?Line Status?"Interfaced",Next Step?"Not Applicable";????????Booked,??????”Shipped“? Workflow background Process ??:Inventory > Workflow Background Engine Item Type:OM Order Line Process Deferred:Yes Process Timeout:No ??program????Deffered???workflow,Workflow Background Process???,???????Order????RA Interface???(RA_INTERFACE_LINES_ALL,RA_INTERFACE_SALESCREDITS_ALL,RA_Interface_distribution) ????????SQL???RA Interface??: 1.SELECT * FROM RA_INTERFACE_LINES_ALL WHERE sales_order = '65961'; 2.SELECT * FROM RA_INTERFACE_SALESCREDITS_ALL WHERE INTERFACE_LINE_ID IN (SELECT INTERFACE_LINE_ID FROM RA_INTERFACE_LINES_ALL WHERE sales_order = '65961' ); 3.SELECT * FROM RA_INTERFACE_DISTRIBUTIONS_ALL WHERE INTERFACE_LINE_ID IN (SELECT INTERFACE_LINE_ID FROM RA_INTERFACE_LINES_ALL WHERE sales_order = '65961' ); ?????RA Interface??,??OE_ORDER_LINES_ALL?INVOICE_INTERFACE_STATUS_CODE????? Yes,INVOICED_QUANTITY?????????????????????????Closed,????????Booked? AutoInvoice ????AR?? ??:Account Receivable > Interface > AutoInvoice Name:Autoinvoice Master Program Invoice Source:Order Entry Default Day:???? ???,?request????”Autoinvoice Import Program“???? ???,????Auto Invoice Program????RA?interface?,?????????????,???????AR???? (RA_CUSTOMER_TRX_ALL,RA_CUSTOMER_TRX_LINES,AR_PAYMENT_SCHEDULES). ?????? Order > Action > Additional Information > Invoices/Credit Memos????????,???????SQL?????AR??, SELECT ooha.order_number , oola.line_number so_line_number , oola.ordered_item , oola.ordered_quantity * oola.unit_selling_price so_extended_price , rcta.trx_number invoice_number , rcta.trx_date , rctla.line_number inv_line_number , rctla.unit_selling_price inv_unit_selling_price FROM oe_order_headers_all ooha , oe_order_lines_all oola , ra_customer_trx_all rcta , ra_customer_trx_lines_all rctla WHERE ooha.header_id = oola.header_id AND rcta.customer_trx_id = rctla.customer_trx_id AND rctla.interface_line_attribute6 = TO_CHAR (oola.line_id) AND rctla.interface_line_attribute1 = TO_CHAR (ooha.order_number) AND order_number = :p_order_number; ??Autoinvoice Import Program???error???,?????RA_INTERFACE_ERRORS_ALL?Message_text??,???????? Closing the Order ?????????,?????????(Close??Cancel)?0.5?,??????Workflow Background Process??????? ????????:you can wait until month-end and the “Order Flow – Generic” workflow will close it for you. Order&Shipping Transactions Status Summary Step Order Header Status Order Line Status Order Flow Workflow Status (Order Header) Line Flow Workflow Status (Order Line) Shipping Transaction  Status(RELEASED_STATUS in WDD) 1. Enter an Order Entered Entered Book Order Manual Enter – Line                              N/A 2. Book the Order Booked Awaiting Shipping Close Order Schedule ->Create Supply ->Ship – Line                       Ready to Release(R) 3. Pick the Order Booked Picked Close Order Ship – Line 1.Released to Warehouse(S)(Pick Release but not pick confirm) 2.Staged/Pick Confirmed(Y)(After pick confirm) 4. Ship the Order Booked Shipped Close Order Fulfill – Deferred 1.Shipped(After ship confirm) 2.Interfaced(C)(After ITS) Booked Closed Close Order Fulfill ->Invoice Interface ->Close Line -> End 5. Close the Order Closed Closed End End ????,shipping txn???,??????????:http://blog.csdn.net/pan_tian/article/details/7696528 ======EOF======

    Read the article

  • Missing Fields and Default Values

    - by PointsToShare
    © 2011 By: Dov Trietsch. All rights reserved Dealing with Missing Fields and Default Values New fields and new default values are not propagated throughout the list. They only apply to new and updated items and not to items already entered. They are only prospective. We need to be able to deal with this issue. Here is a scenario. The user has an old list with old items and adds a new field. The field is not created for any of the old items. Trying to get its value raises an Argument Exception. Here is another: a default value is added to a field. All the old items, where the field was not assigned a value, do not get the new default value. The two can also happen in tandem – a new field is added with a default. The older items have neither. Even better, if the user changes the default value, the old items still carry the old defaults. Let’s go a bit further. You have already written code for the list, be it an event receiver, a feature receiver, a console app or a command extension, in which you span all the fields and run on selected items – some new (no problem) and some old (problems aplenty). Had you written defensive code, you would be able to handle the situation, including similar changes in the future. So, without further ado, here’s how. Instead of just getting the value of a field in an item – item[field].ToString() – use the function below. I use ItemValue(item, fieldname, “mud in your eye”) and if “mud in your eye” is what I get, I know that the item did not have the field.   /// <summary> /// Return the column value or a default value /// </summary> private static string ItemValue(SPItem item, string column, string defaultValue) {     try     {         return item[column].ToString();     }     catch (NullReferenceException ex)     {         return defaultValue;     }     catch (ArgumentException ex)     {         return defaultValue;     } } I also use a similar function to return the default and a funny default-default to ascertain that the default does not exist. Here it is:  /// <summary> /// return a fields default or the "default" default. /// </summary> public static string GetFieldDefault(SPField fld, string defValue) {     try     {         // -- Check if default exists.         return fld.DefaultValue.ToString();     }     catch (NullReferenceException ex)     {         return defValue;     }     catch (ArgumentException ex)     {         return defValue;     } } How is this defensive? You have trapped an expected error and dealt with it. Therefore the program did not stop cold in its track and the required code ran to its end. Now, take a further step - write to a log (See Logging – a log blog). Read your own log every now and then, and act accordingly. That’s all Folks!

    Read the article

  • Is this spaghetti code already? [migrated]

    - by hephestos
    I post the following code writen all by hand. Why I have the feeling that it is a western spaghetti on its own. Second, could that be written better? <div id="form-board" class="notice" style="height: 200px; min-height: 109px; width: auto;display: none;"> <script type="text/javascript"> jQuery(document).ready(function(){ $(".form-button-slide").click(function(){ $( "#form-board" ).dialog(); return false; }); }); </script> <?php echo $this->Form->create('mysubmit'); echo $this->Form->input('inputs', array('type' => 'select', 'id' => 'inputs', 'options' => $inputs)); echo $this->Form->input('Fields', array('type' => 'select', 'id' => 'fields', 'empty' => '-- Pick a state first --')); echo $this->Form->input('inputs2', array('type' => 'select', 'id' => 'inputs2', 'options' => $inputs2)); echo $this->Form->input('Fields2', array('type' => 'select', 'id' => 'fields2', 'empty' => '-- Pick a state first --')); echo $this->Form->end("Submit"); ?> </div> <div style="width:100%"></div> <div class="form-button-slide" style="float:left;display:block;"> <?php echo $this->Html->link("Error Results", "#"); ?> </div> <script type="text/javascript"> jQuery(document).ready(function(){ $("#mysubmitIndexForm").submit(function() { // we want to store the values from the form input box, then send via ajax below jQuery.post("Staffs/view", { data1: $("#inputs").attr('value'), data2:$("#inputs2").attr('value'),data3:$("#fields").attr('value'), data4:$("#fields2").attr('value') } ); //Close the dialog $( "#form-board" ).dialog('close') return false; }); $("#inputs").change(function() { // we want to store the values from the form input box, then send via ajax below var input_id = $('#inputs').attr('value'); $.ajax({ type: "POST", //The controller who listens to our request url: "Inputs/getFieldsFromOneInput/"+input_id, data: "input_id="+ input_id, //+"&amp; lname="+ lname, success: function(data){//function on success with returned data $('form#mysubmit').hide(function(){}); data = $.parseJSON(data); var sel = $("#fields"); sel.empty(); for (var i=0; i<data.length; i++) { sel.append('<option value="' + data[i].id + '">' + data[i].name + '</option>'); } } }); return false; }); $("#inputs2").change(function() { // we want to store the values from the form input box, then send via ajax below var input_id = $('#inputs2').attr('value'); $.ajax({ type: "POST", //The controller who listens to our request url: "Inputs/getFieldsFromOneInput/"+input_id, data: "input_id="+ input_id, //+"&amp; lname="+ lname, success: function(data){//function on success with returned data $('form#mysubmit').hide(function(){}); data = $.parseJSON(data); var sel = $("#fields2"); sel.empty(); for (var i=0; i<data.length; i++) { sel.append('<option value="' + data[i].id + '">' + data[i].name + '</option>'); } } }); return false; }); }); </script>

    Read the article

  • Am I going about this the right way?

    - by Psytronic
    Hey Guys, I'm starting a WPF project, and just finished the base of the UI, it seems very convoluted though, so I'm not sure if I've gone around laying it out in the right way. I don't want to get to start developing the back-end and realise that I've done the front wrong, and make life harder for myself. Coming from a background of <DIV's and CSS to style this is a lot different, and really want to get it right from the start. Essentially it's a one week calendar (7 days, Mon-Sunday, defaulting to the current week.) Which will eventually link up to a DB and if I have an appointment for something on this day it will show it in the relevant day. I've opted for a Grid rather than ListView because of the way it will work I will not be binding the results to a collection or anything along those lines. Rather I will be filling out a Combo box within the canvas for each day (yet to be placed in the code) for each event and on selection it will show me further details. XAML: <Window x:Class="WOW_Widget.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:s="clr-namespace:System;assembly=mscorlib" xmlns:Extensions="clr-namespace:WOW_Widget" DataContext="{Binding RelativeSource={RelativeSource Self}}" Title="Window1" Height="239" Width="831" <Window.Resources <LinearGradientBrush x:Key="NormalBrush" StartPoint="0,0" EndPoint="0,1" <GradientBrush.GradientStops <GradientStopCollection <GradientStop Offset="1.0" Color="White"/ <GradientStop Offset="0.0" Color="LightSlateGray"/ </GradientStopCollection </GradientBrush.GradientStops </LinearGradientBrush <LinearGradientBrush x:Key="grdDayHeader" StartPoint="0,0" EndPoint="0,1" <GradientBrush.GradientStops <GradientStopCollection <GradientStop Offset="0.0" Color="Peru" / <GradientStop Offset="1.0" Color="White" / </GradientStopCollection </GradientBrush.GradientStops </LinearGradientBrush <LinearGradientBrush x:Key="grdToday" StartPoint="0,0" EndPoint="0,1" <GradientBrush.GradientStops <GradientStopCollection <GradientStop Offset="0.0" Color="LimeGreen"/ <GradientStop Offset="1.0" Color="DarkGreen" / </GradientStopCollection </GradientBrush.GradientStops </LinearGradientBrush <Style TargetType="{x:Type GridViewColumnHeader}" <Setter Property="Background" Value="Khaki" / </Style <Style x:Key="DayHeader" TargetType="{x:Type Label}" <Setter Property="Background" Value="{StaticResource grdDayHeader}" / <Setter Property="Width" Value="111" / <Setter Property="Height" Value="25" / <Setter Property="HorizontalContentAlignment" Value="Center" / </Style <Style x:Key="DayField" <Setter Property="Canvas.Width" Value="111" / <Setter Property="Canvas.Height" Value="60" / <Setter Property="Canvas.Background" Value="White" / </Style <Style x:Key="Today" <Setter Property="Canvas.Background" Value="{StaticResource grdToday}" / </Style <Style x:Key="CalendarColSpacer" <Setter Property="Canvas.Width" Value="1" / <Setter Property="Canvas.Background" Value="Black" / </Style <Style x:Key="CalendarRowSpacer" <Setter Property="Canvas.Height" Value="1" / <Setter Property="Canvas.Background" Value="Black" / </Style </Window.Resources <Grid Background="{StaticResource NormalBrush}" <Border BorderBrush="Black" BorderThickness="1" Width="785" Height="86" Margin="12,12,12,104" <Canvas Height="86" Width="785" VerticalAlignment="Top" <Grid <Grid.ColumnDefinitions <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / <ColumnDefinition / </Grid.ColumnDefinitions <Grid.RowDefinitions <RowDefinition / <RowDefinition / <RowDefinition / </Grid.RowDefinitions <Label Grid.Column="0" Grid.Row="0" Content="Monday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="1" Grid.RowSpan="3" Grid.Row="0" Style="{StaticResource CalendarColSpacer}" / <Label Grid.Column="2" Grid.Row="0" Content="Tuesday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="3" Grid.RowSpan="3" Grid.Row="0" Style="{StaticResource CalendarColSpacer}" / <Label Grid.Column="4" Grid.Row="0" Content="Wednesday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="5" Grid.RowSpan="3" Grid.Row="0" Style="{StaticResource CalendarColSpacer}" / <Label Grid.Column="6" Grid.Row="0" Content="Thursday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="7" Grid.RowSpan="3" Grid.Row="0" Style="{StaticResource CalendarColSpacer}" / <Label Grid.Column="8" Grid.Row="0" Content="Friday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="9" Grid.RowSpan="3" Grid.Row="0" Style="{StaticResource CalendarColSpacer}" / <Label Grid.Column="10" Grid.Row="0" Content="Saturday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="11" Grid.RowSpan="3" Grid.Row="0" Style="{StaticResource CalendarColSpacer}" / <Label Grid.Column="12" Grid.Row="0" Content="Sunday" Style="{StaticResource DayHeader}" / <Canvas Grid.Column="0" Grid.ColumnSpan="13" Grid.Row="1" Style="{StaticResource CalendarRowSpacer}" / <Canvas Grid.Column="0" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblMondayDate" / </Canvas <Canvas Grid.Column="2" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblTuesdayDate" / </Canvas <Canvas Grid.Column="4" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblWednesdayDate" / </Canvas <Canvas Grid.Column="6" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblThursdayDate" / </Canvas <Canvas Grid.Column="8" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblFridayDate" / </Canvas <Canvas Grid.Column="10" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblSaturdayDate" / </Canvas <Canvas Grid.Column="12" Grid.Row="2" Margin="0" Style="{StaticResource DayField}" <Label Name="lblSundayDate" / </Canvas </Grid </Canvas </Border <Canvas Height="86" HorizontalAlignment="Right" Margin="0,0,12,12" Name="canvas1" VerticalAlignment="Bottom" Width="198"</Canvas </Grid </Window CS: public partial class Window1 : Window { private DateTime today = new DateTime(); private Label[] Dates = new Label[7]; public Window1() { DateTime start = today = DateTime.Now; int day = (int)today.DayOfWeek; while (day != 1) { start = start.Subtract(new TimeSpan(1, 0, 0, 0)); day--; } InitializeComponent(); Dates[0] = lblMondayDate; Dates[1] = lblTuesdayDate; Dates[2] = lblWednesdayDate; Dates[3] = lblThursdayDate; Dates[4] = lblFridayDate; Dates[5] = lblSaturdayDate; Dates[6] = lblSundayDate; FillWeek(start); } private void FillWeek(DateTime start) { for (int d = 0; d < Dates.Length; d++) { TimeSpan td = new TimeSpan(d, 0, 0, 0); DateTime _day = start.Add(td); if (_day.Date == today.Date) { Canvas dayCanvas = (Canvas)Dates[d].Parent; dayCanvas.Style = (Style)this.Resources["Today"]; } Dates[d].Content = (int)start.Add(td).Day; } } } Thanks for any tips you guys can give Psytronic

    Read the article

  • Spring 3.0: Handler mapping issue

    - by Yaniv Cohen
    I am having a trouble mapping a specific URL request to one of the controllers in my project. the URL is : http://HOSTNAME/api/v1/profiles.json the war which is deployed is: api.war the error I get is the following: [PageNotFound] No mapping found for HTTP request with URI [/api/v1/profiles.json] in DispatcherServlet with name 'action' The configuration I have is the following: web.xml : <context-param> <param-name>contextConfigLocation</param-name> <param-value>/WEB-INF/applicationContext.xml,/WEB-INF/applicationContext-security.xml</param-value> </context-param> <!-- Cache Control filter --> <filter> <filter-name>cacheControlFilter</filter-name> <filter-class>org.springframework.web.filter.DelegatingFilterProxy</filter-class> </filter> <!-- Cache Control filter mapping --> <filter-mapping> <filter-name>cacheControlFilter</filter-name> <url-pattern>/*</url-pattern> </filter-mapping> <!-- Spring security filter --> <filter> <filter-name>springSecurityFilterChain</filter-name> <filter-class>org.springframework.web.filter.DelegatingFilterProxy</filter-class> </filter> <!-- Spring security filter mapping --> <filter-mapping> <filter-name>springSecurityFilterChain</filter-name> <url-pattern>/*</url-pattern> </filter-mapping> <!-- Spring listener --> <listener> <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class> </listener> <!-- Spring Controller --> <servlet> <servlet-name>action</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>action</servlet-name> <url-pattern>/v1/*</url-pattern> </servlet-mapping> The action-servlet.xml: <mvc:annotation-driven/> <bean id="contentNegotiatingViewResolver" class="org.springframework.web.servlet.view.ContentNegotiatingViewResolver"> <property name="favorPathExtension" value="true" /> <property name="favorParameter" value="true" /> <!-- default media format parameter name is 'format' --> <property name="ignoreAcceptHeader" value="false" /> <property name="order" value="1" /> <property name="mediaTypes"> <map> <entry key="html" value="text/html"/> <entry key="json" value="application/json" /> <entry key="xml" value="application/xml" /> </map> </property> <property name="viewResolvers"> <list> <bean class="org.springframework.web.servlet.view.InternalResourceViewResolver"> <property name="prefix" value="/WEB-INF/jsp/"/> <property name="suffix" value=".jsp"/> <property name="viewClass" value="org.springframework.web.servlet.view.JstlView" /> </bean> </list> </property> <property name="defaultViews"> <list> <bean class="org.springframework.web.servlet.view.json.MappingJacksonJsonView" /> <bean class="org.springframework.web.servlet.view.xml.MarshallingView"> <constructor-arg> <bean class="org.springframework.oxm.xstream.XStreamMarshaller" /> </constructor-arg> </bean> </list> </property> </bean> the application context security: <sec:http auto-config='true' > <sec:intercept-url pattern="/login.*" filters="none"/> <sec:intercept-url pattern="/oauth/**" access="ROLE_USER" /> <sec:intercept-url pattern="/v1/**" access="ROLE_USER" /> <sec:intercept-url pattern="/request_token_authorized.jsp" access="ROLE_USER" /> <sec:intercept-url pattern="/**" access="ROLE_USER"/> <sec:form-login authentication-failure-url ="/login.html" default-target-url ="/login.html" login-page ="/login.html" login-processing-url ="/login.html" /> <sec:logout logout-success-url="/index.html" logout-url="/logout.html" /> </sec:http> the controller: @Controller public class ProfilesController { @RequestMapping(value = {"/v1/profiles"}, method = {RequestMethod.GET,RequestMethod.POST}) public void getProfilesList(@ModelAttribute("response") Response response) { .... } } the request never reaches this controller. Any ideas?

    Read the article

  • jQuery show hide divs on radio buttons

    - by RyanP13
    I have got a group of radio buttons that when clicked need to display a corresponding unordered list. I have got as far as showing the correct list according to which radio button is clicked but cannot figure out how to hide the other lists that need to be hidden. So if i click the second benefits radion then the second 'spend' ul will display and the other 'spend' uls will hide. This is my jQuery: // hide all except first ul $('div.chevron ul').not(':first').hide(); // $('div.chevron > ul > li > input[name=benefits]').live('click',function() { // work out which radio has been clicked var $radioClick = $(this).index('div.chevron > ul > li > input[name=benefits]'); var $radioClick = $radioClick + 1; $('div.chevron > ul').eq($radioClick).show(); }); // trigger click event to show spend list var $defaultRadio = $('div.chevron > ul > li > input:first[name=benefits]') $defaultRadio.trigger('click'); And this is my HTML: <div class="divider chevron"> <ul> <li><strong>What benefit are you most interested in?</strong></li> <li> <input type="radio" class="inlineSpace" name="benefits" id="firstBenefit" value="Dental" checked="checked" /> <label for="firstBenefit">Dental</label> </li> <li> <input type="radio" class="inlineSpace" name="benefits" id="secondBenefit" value="Optical" /> <label for="secondBenefit">Optical</label> </li> <li> <input type="radio" class="inlineSpace" name="benefits" id="thirdBenefit" value="Physiotherapy" /> <label for="thirdBenefit">Physiotherapy, osteopathy, chiropractic, acupuncture</label> </li> </ul> <ul> <li><strong>How much do you spend a year on Dental?</strong></li> <li> <input type="radio" class="inlineSpace" name="spend" id="rate1a" value="£50" /> <label for="rate1a">&pound;50</label> </li> <li> <input type="radio" class="inlineSpace" name="spend" id="rate2a" value="£100" /> <label for="rate2a">&pound;100</label> </li> <li> <input type="radio" class="inlineSpace" name="spend" id="rate3a" value="£150" /> <label for="rate3a">&pound;150</label> </li> </ul> <ul> <li><strong>How much do you spend a year on Optical?</strong></li> <li> <input type="radio" class="inlineSpace" name="spend" id="rate1b" value="£50" /> <label for="rate1a">&pound;50</label> </li> <li> <input type="radio" class="inlineSpace" name="spend" id="rate2b" value="£100" /> <label for="rate2a">&pound;100</label> </li> <li> <input type="radio" class="inlineSpace" name="spend" id="rate3b" value="£150" /> <label for="rate3a">&pound;150</label> </li> </ul> <ul> <li><strong>How much do you spend a year on Physiotherapy, osteopathy, chiropractic, acupuncture?</strong></li> <li> <input type="radio" class="inlineSpace" name="spend" id="rate1c" value="£50" /> <label for="rate1a">&pound;50</label> </li> <li> <input type="radio" class="inlineSpace" name="spend" id="rate2c" value="£100" /> <label for="rate2a">&pound;100</label> </li> <li> <input type="radio" class="inlineSpace" name="spend" id="rate3c" value="£150" /> <label for="rate3a">&pound;150</label> </li> </ul> <label class="button"><input type="submit" value="View your quote" class="submit" /></label> </div> I tried using: $('div.chevron > ul').not($radioClick).hide(); But that yielded a bad result where all the lists where hidden. Thanks in advance.

    Read the article

< Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >