Search Results

Search found 21501 results on 861 pages for 'slow connection'.

Page 313/861 | < Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >

  • Help with the RT3290 Wireless adapter

    - by Potek
    I know there is a lot of questions about RT3290 wireless adapter, but I read many many of them and noone helped me with my problem. So, I have the HP Pavilion dm1 laptop and I installed Xubuntu 13.10 on it. During the instalation it poped up that I'm able to connect to the internet via network adapter. I did it obviously, but it worked for like 5 seconds, then it said that network connection is down and I couldn't connect to my router, even if i could actually see network connections avaible. Then (when installation ended) I rebooted my computer. My network was avaible! I could connect and browse the internet smoothly. Next day I turned on my laptop and I saw my wireless connection is no longer avaible, so I plugged laptop to the internet via Ethernet cable and started to explore internet searching solution for my problem. I did this: How do I get a Ralink RT3290 wireless card working? And I was able to connect BUT my kernel started to panic every time I started Mozilla or any program that is connecting to the internet. Every tip i searched was almost the same as the link above. I tried to do this many ways. I even Reinstalled Xubuntu to do everything with clear system but the same thing happened. THEN I installed Linux Mint to check whether it is a major or just Xubuntu problem. Linux Mint responded even worse, because I wasn't even able to use terminal (I clearly messed something up). I would really, really appreciate every help, because I do want to solve this problem and finally be able to use Xubuntu/Ubuntu. I'm waiting for advice from anyone patiently. If anyone wants some details, just tell me which ones.

    Read the article

  • SCCM SP2 - OOB Management Certificates Problems

    - by Achinoam
    I have a vPro client computer with AMT 4.0. It was importeed successfully via the Import OOB Computers wizard, and after sending a "Hello- packet" it became provisioned. (The SCCM GUI displays AMT Status: Provisioned). But when I try to perform power operations on this machine, they always fail with the following lines in the log: AMT Operation Worker: Wakes up to process instruction files 7/29/2009 10:59:29 AM 2176 (0x0880) AMT Operation Worker: Wait 20 seconds... 7/29/2009 10:59:29 AM 2176 (0x0880) Auto-worker Thread Pool: Work thread 3884 started 7/29/2009 10:59:29 AM 3884 (0x0F2C) session params : https:/ / amt4.domaindemo.com:16993 , 11001 7/29/2009 10:59:29 AM 3884 (0x0F2C) ERROR: Invoke(invoke) failed: 80020009argNum = 0 7/29/2009 10:59:31 AM 3884 (0x0F2C) Description: A security error occurred 7/29/2009 10:59:31 AM 3884 (0x0F2C) Error: Failed to Invoke CIM_BootConfigSetting::ChangeBootOrder_INPUT action. 7/29/2009 10:59:31 AM 3884 (0x0F2C) AMT Operation Worker: AMT machine amt4.domaindemo.com can't be waken up. Error code: 0x80072F8F 7/29/2009 10:59:31 AM 3884 (0x0F2C) Auto-worker Thread Pool: Warning, Failed to run task this time. Will retry(1) it 7/29/2009 10:59:31 AM 3884 (0x0F2C) After investigation, I've seen that the problem occurs already on the 2nd stage of the provisioning: Start 2nd stage provision on AMT device amt4.domaindemo.com. 8/2/2009 4:55:12 PM 2944 (0x0B80) session params : https: / / amt4.domaindemo.com:16993 , 11001 8/2/2009 4:55:12 PM 2944 (0x0B80) Delete existing ACLs... 8/2/2009 4:55:12 PM 2944 (0x0B80) ERROR: Invoke(invoke) failed: 80020009argNum = 0 8/2/2009 4:55:14 PM 2944 (0x0B80) Description: A security error occurred 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Cannot Enumerate User Acl Entries. 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: CSMSAMTProvTask::StartProvision Fail to call AMTWSManUtilities::DeleteACLs 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Can not finish WSMAN call with target device. 1. Check if there is a winhttp proxy to block connection. 2. Service point is trying to establish connection with wireless IP address of AMT firmware but wireless management has NOT enabled yet. AMT firmware doesn't support provision through wireless connection. 3. For greater than 3.x AMT, there is a known issue in AMT firmware that WSMAN will fail with FQDN longer than 44 bytes. (MachineId = 17) 8/2/2009 4:55:14 PM 2944 (0x0B80) STATMSG: ID=7208 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=JE-DEV-MS0 SITE=JR1 PID=1756 TID=2944 GMTDATE=Sun Aug 02 14:55:14.281 2009 ISTR0="amt4.domaindemo.com" ISTR1="amt4.domaindemo.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 8/2/2009 4:55:14 PM 2944 (0x0B80) This error is consistent with all the other 2nd stage provisioning tasks. (Add ACLs, Enable Web UI, etc.) I've opened the certification authority, and I see that the certificates were issued to the SCCM Site server instead of the AMT client! What could be the reason for this failure? What is the problematic definition for the certificate? Thank you in advance!!!

    Read the article

  • Frequent disconnects using wlan AR9285

    - by John Neil
    I'm getting a large number of disconnects from my wireless when I switched to oneiric server (I did not see these happen with oneiric desktop) from my AR9285 wireless LAN device. Here is the syslog snippet: Oct 17 09:43:17 weather kernel: [ 1537.329138] wlan0: deauthenticated from 00:12:17:7a:8e:42 (Reason: 7) Oct 17 09:43:17 weather kernel: [ 1537.340409] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340423] cfg80211: Restoring regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340435] cfg80211: Calling CRDA to update world regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348571] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348581] cfg80211: World regulatory domain updated: Oct 17 09:43:17 weather kernel: [ 1537.348586] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 17 09:43:17 weather kernel: [ 1537.348594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348600] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348607] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348613] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348620] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Here is the relevant lspci output: # lspci | grep Atheros 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I have done quite a bit of searching and saw discussions for previous versions of ubuntu that recommended installing the linux-backports-modules package. However, this does not appear to be available for oneiric (just the headers are listed as a package). Any advice on how to achieve a stable wireless connection for this server? It's location mitigates against using a wired connection.

    Read the article

  • postfix and chdir domain.com/admin/ failed

    - by senzacionale
    root@ubuntu-server:/var/log# telnet localhost 110 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. +OK Hello there. user [email protected] +OK Password required. pass MyPasswd -ERR chdir domain.com/admin/ failed Connection closed by foreign host. and mail.log Apr 24 12:36:41 ubuntu-server pop3d: Connection, ip=[::ffff:127.0.0.1] Apr 24 12:36:58 ubuntu-server pop3d: chdir domain.com/admin/: No such file or directory what can i do? how to set up this directories? MX records are set, domain is set,...

    Read the article

  • nagios: trouble using check_smtps command

    - by ethrbunny
    I'm trying to use this command to check on port 587 for my postfix server. Using nmap -P0 mail.server.com I see this: Starting Nmap 5.51 ( http://nmap.org ) at 2013-11-04 05:01 PST Nmap scan report for mail.server.com (xx.xx.xx.xx) Host is up (0.0016s latency). rDNS record for xx.xx.xx.xx: another.server.com Not shown: 990 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 110/tcp open pop3 111/tcp open rpcbind 143/tcp open imap 465/tcp open smtps 587/tcp open submission 993/tcp open imaps 995/tcp open pop3s 5666/tcp open nrpe So I know the relevant ports for smtps (465 or 587) are open. When I use openssl s_client -connect mail.server.com:587 -starttls smtp I get a connection with all the various SSL info. (Same for port 465). But when I try libexec/check_ssmtp -H mail.server.com -p587 I get: CRITICAL - Cannot make SSL connection. 140200102082408:error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol:s23_clnt.c:699: What am I doing wrong?

    Read the article

  • Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

    - by gil b.
    Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

    Read the article

  • Conflict resolution for two-way sync

    - by K.Steff
    How do you manage two-way synchronization between a 'main' database server and many 'secondary' servers, in particular conflict resolution, assuming a connection is not always available? For example, I have an mobile app that uses CoreData as the 'database' on the iOS and I'd like to allow users to edit the contents without Internet connection. In the same time, this information is available on a website the devices will connect to. What do I do if/when the data on the two DB servers is in conflict? (I refer to CoreData as a DB server, though I am aware it is something slightly different.) Are there any general strategies for dealing with this sort of issue? These are the options I can think of: 1. Always use the client-side data as higher-priority 2. Same for server-side 3. Try to resolve conflicts by marking each field's edit timestamp and taking the latest edit Though I'm certain the 3rd option will open room for some devastating data corruption. I'm aware that the CAP theorem concerns this, but I only want eventual consistency, so it doesn't rule it out completely, right? Related question: Best practice patterns for two-way data synchronization. The second answer to this question says it probably can't be done.

    Read the article

  • Routing tables don't show ppp0 after 12.04 kernel upgrade to 3.5.0: Haier CE682 modem configuration

    - by ubunsteve
    I'm trying to get my Haier CE682 EVDO modem, model number 201e:1022 to work in ubuntu 12.04 kernel 3.5.0-030500-generic #201207211835 . I had it working in a previous 12.04 kernel, using compat-wireless and these instructions http://zulkhamsyahmh.blogspot.com/2012/05/install-smartfren-haier-ce682-on-ubuntu.html, and to get it working had to edit the routing tables so that there was a ppp0 showing up, as suggested at http://www.linuxquestions.org/questions/slackware-14/wvdial-is-connecting-but-im-unable-to-do-anything-714861/ Network manager doesn't work with this modem, so I use either wvdial or gpppon to connect to it, both which work (after I run the command sudo modprobe usbserial vendor=0x201e product=0x1022 ) This is the output of when I connect with gpppon to the modem: Using interface ppp0 Connect: ppp0 <-- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x2 ] sent [LCP ConfAck id=0x2 ] sent [LCP EchoReq id=0x0 magic=0x819c86db] rcvd [CHAP Challenge id=0x1 <1ac8f12799e953967a3cc222c9254690, name = ""] sent [CHAP Response id=0x1 <6f12a903dc40915ca2761c17b87f8fbd, name = "smart"] rcvd [LCP EchoRep id=0x0 magic=0x0] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [CCP ConfReq id=0x1] sent [CCP ConfAck id=0x1] rcvd [CCP ConfRej id=0x1 ] sent [CCP ConfReq id=0x2] rcvd [IPCP ConfRej id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [CCP ConfAck id=0x2] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfAck id=0x3 ] not replacing existing default route via 192.168.3.1 local IP address 10.191.248.154 remote IP address 10.17.95.25 primary DNS address 10.17.3.244 secondary DNS address 10.17.3.245 as you can see there is a problem with "not replacing existing default route via 192.168.3.1" This it the out put of route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.3.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.3.0 * 255.255.255.0 U 2 0 0 wlan0 I had tried these commands, which had previously worked in the earlier kernel: route del default route add default ppp0 but that broke my wireless internet connection. I then added the default routing as shown above with sudo route add default gw 192.168.3.1 wlan0 So it seems I need to add or change the routing to show a ppp0 connection, but I don't know how to do that.

    Read the article

  • Tip: Keeping the ADF Mobile PDF Guide up to date

    - by Chris Muir
    This is a little tip for customers using Oracle's ADF Mobile. If you're like me, it's possible you don't rely on the online HTML version of the Mobile Developer's Guide for ADF, but rather download a PDF version of the file to use locally (look to the "PDF" link to the top right of the guide).  For me the convenience of the PDF is it's faster, I can search the whole document easily, I can split read the document across two pages on my home monitor, if I lose my internet connection the document is still available, and it's easy to read on my iPad (especially on long haul flights to the US across the Pacific where there is no internet connection!). The trigger point for me to download the Oracle PDF documentation has always been on a new point release of JDeveloper.  However in the case of ADF Mobile, as an extension to JDeveloper it is releasing at a much faster and independent schedule to JDeveloper and this includes updates to the documentation. As such the 11.1.2.4.0 ADF Mobile PDF guide you have locally might be out of date and you should take the opportunity to download the latest version.  This is also particularly important for ADF Mobile as not only are many new features being added for each release and included in the new documentation, but the guide is under rapid improvement to clarify much of what has been written to date.  Our documentation teams are super responsive to suggestions on how to improve the guides and this often shows per point release. How do you tell you've the latest guide? Look to the document part number which right now is "E24475-03".  This is a unique ID per release for the document, the first part being the document number, and the part after the dash the revision number.  If the website document number has a higher revision number, time to download a new up to date PDF. One last thing to share, you can follow the ADF Mobile guide document manager Brian Duffield on Twitter to keep abreast of updates. Image courtesy of Stuart Miles / FreeDigitalPhotos.net

    Read the article

  • Sending emails with remote mail server in ASP.NET blocked by Windows firewall?

    - by Dave
    I want to migrate a web application from a Windows Server 2003 to a Windows Server 2008 R2. All works fine except sending emails from the application. If I configure the application to use the smtp server on "localhost" it works, but changing it to the "real" host name (e.g. mail.example.org) no mail is sent. The error message says, that the remote server needs a secure connection or smtp authentication. But since it works when using "localhost" instead of the host name I doubt that this is the problem. Also it's unlikely a problem with the mail server, I also tried it with another one. So for me it seems like the firewall is blocking the outgoing connection to the mail server. I tried to open port 25, but it still did not work. Maybe I just did it the wrong way.

    Read the article

  • Nginx ignoring client's HTTP 1.0 request and respond by HTTP 1.1

    - by Yoga
    I am testing using nginx/php5-fpm, with the code <?php header($_SERVER["SERVER_PROTOCOL"]." 404 Not Found"); // also tested: header("Status: 404 Not Found"); echo $_SERVER["SERVER_PROTOCOL"]; And force to use HTTP 1.0 with the curl command. curl -0 -v 'http://www.example.com/test.php' > GET /test.php HTTP/1.0 < HTTP/1.1 404 Not Found < Server: nginx < Date: Sat, 27 Oct 2012 08:51:27 GMT < Content-Type: text/html < Connection: close < * Closing connection #0 HTTP/1.0 As you can see I am already requesting using HTTP 1.0, but nginx reply me with HTTP 1.1

    Read the article

  • 12.10 Wireless hotspot configuration and internet browsing - question

    - by Indian
    In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

    Read the article

  • How do I access an Ubuntu VirtualBox guest at a static IP from an OS X host?

    - by David Siegel
    How does one configure an Ubuntu guest to use a static IP that's visible to an OS X host, and ensure that the static IP is independent of the host's network configuration? I previously used bridged networking for my guest, but I'm constantly moving my host between networks so the guest IP is always different. First, I tried setting the guest network configuration to NAT and forwarding host port 1022 to guest port 22, so I could at least ssh to a fixed address (localhost:1022): $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/Protocol" "TCP" $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/GuestPort" 22 $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/HostPort" 1022 Then, $ ssh localhost -p 1022 ssh: connect to host localhost port 1022: Connection refused But this didn't work (guest has no network access with NAT and OS X refused the connection, as you can see). I'd love a general solution that would let me communicate with my guest at a fixed IP.

    Read the article

  • Uploading with browser makes all other browser tabs and devices disconnect

    - by fabsenet
    Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

    Read the article

  • DLINK Dir-655 Sharing and connecting wirelessly

    - by CYREX
    I have a D-LINK DIR-655 and i wish to do the following: My PC is connected to the internet via eth0 (Wired) and it has a wireless card. I wish to connect to the DIR-655 Router and share my connection via the router but wirelessly. I do not want to connect via a cabled wired to the router. I want to connect to the router via wifi. After that i want to make the Router share the wireless connection am giving it to other PCs wirelessly. So the sharing and connecting in all PCs will be done via WiFi.

    Read the article

  • sftp chroot access via SSH

    - by Cudos
    Hello. I have this setup in sshd_config: AllowUsers test1 test2 Match group sftpgroup ChrootDirectory /var/www X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp Match user test2 ChrootDirectory /var/www/somedomain.dk X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp I am trying to restrict test2 to only use /var/www/somedomain.dk For some reason when I try to login e.g. with Filezilla on account test2 I get this error: "Server unexpectedly closed network connection" The users are created and works. the SSH service has been stopped and started. test1 works when using e.g. filezilla and the root of the connection is /var/www. What am I doing wrong?

    Read the article

  • Windows Server 2003 Terminal Services error

    - by Adrian S
    Hi! I have a Win2K3 machine which I want to access via remote desktop. When I try remote desktop on another machine the session just ends as soon as it attempts connection. I never see the log-on sceeen or anything. It just returns to the remote desktop connection dialog. I have checked the service on the target machine and it's up and running, so how can I determine the error? Is there any way to re-install terminal services and see if it just fixed?

    Read the article

  • Would a typical corporate firewall block a Java applet having the following behaviour

    - by auser
    I'm thinking of developing a proxy-like program to forward ports on a remote PC to a local PC (for example SSH). Assume that both local and remote PCs are running behind typical firewalls (i.e. consumer broadband router firewall, Windows firewall or corporate firewalls). The program will be a Java program which the user will run on both the remote and local PC. The remote client will periodically poll a central server to determine whether there are pending client connections. A session could be initiated as follows: The local client contacts the central server and request the current connection details for a specific remote client. The central server responds with the remote server's last received IP address and port. The next time the remote server polls the central server, the client's IP address and port are returned. The remote server initiates a connection to the local client using the IP address and port returned by the central server and listens for a response on a random port. The remote server will pass the value of the port it's listening on to central server. Goto 1, if client fails to connect to server. Would this work or will a typical firewall block the interactions.

    Read the article

  • Is there any danger in disabling windows firewall on a azure worker role?

    - by NullReference
    I'm trying to troubleshoot a bug on our Azure worker role where we occasionally get the error "Unable to read data from the transport connection: An established connection was aborted by the software in your host machine". This error occurs when we are connecting to outside resources like google auth servers. A few people have recommended disabling the firewall\antivirus on the server. I'm just wondering what kind of security risk we would take by doing this. The server doesn't have iis installed but would it be vulnerable to hacking without the firewall? Thanks

    Read the article

  • apt-get update stuck on "Waiting for Headers"

    - by crasic
    I'm setting up a Maverick server on a spare PC. The install completes fine and the system boots up into the shell. However, when I try to do a apt-get update , apt hangs on almost every entry with the message 99% [Waiting for headers] sometimes a message of 96 b/s appears on the far right. The actual percent that it claims also varies. Searching around online gave a potential solution by using the option Acquire::http::Pipeline-Depth="0" this somewhat alleviates the problem, i.e. it stalls on every other entry with the same message as above. If you wait it out (the whole update took about 4 hours), the update still fails as a good portion of the hits show a "unable to connect" or similar message, despite the fact that I can ping the server from the pc just fine. The problem is also unrelated to the mirror used since I've tried about a dozen mirrors with no success, I've even tried commenting out everything but the main entry in sources.list and it still refuses to update. The network connection is fine since I can ping and wget (apt won't let me install lynx until I run a successful update) just fine. I've also reinstalled the distro with no luck. The only thing weird about the setup is that the PC is connecting to the internet through my windows laptop with ICS configured properly, but as I've said before, the network connection is fine.

    Read the article

  • Mac OS X: pushing all traffic through a VMWare VM

    - by bj99
    I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

    Read the article

  • BGP Router reccomendations for simple redundancy [closed]

    - by Jona
    We have two sites that each have an internet connection and have a dedicated dark fibre between them. Each site has it's own IP space and we have an AS number. We're looking to be resilient to failure of the internet connection to either site and so need to buy a pair of approriate routers. Requirements are: Able to run 2 bgp sessions (one with the ISP, one with the other site router) Option to take a full table from the upstream ISPs would be nice. Able to provide HA gateways on the LAN side (e.g. 192.168.0.254 will automatically migrate if it's host router lost power) A dedicated device rather than a server running Linux / BSD Not crazy expensive. Any help / advice much appreciated.

    Read the article

  • Black screen with thinkpad edge e525, AMD radeon HD before and after installation, plymouth?

    - by carolien
    I have a new thinkpad edge e525 (which should work) and wanted to try ubuntu (first linux experience). With the ubuntu desktop-cd I had a blackscreen before installation, I could fix that with nomodeset. After the installation, when rebooting I got the black screen again. First I see some ubuntu colour with a green busted stripe. I have the same problem with the live boot, also tried mint live, the stripe gets pink. I installed xubuntu 64bit from an alternate cd and I didnt have problems until de reboot after the installation. Same problem, just a black screen with the green stripe than blackscreen. I tried several things: adding nomodeset to the bootmenu, but than I get: No connection to plymouth and it is stuck at checking the battery status. I tried to replace quiet splash with text. Didnt work either. actually one time I saw a blue booting image before that. I managed to get a root command though via the recovery boot. I didnt dare to just remove the plymouth package. Can I just delete plymouth or do I have to deinstall it as described in several ways. (Problem is, right now the notebook doesnt have a internet connection. And I dont know how to manage it with a usb stick?) Or do I have to install the AMD catalyst driver manually? (Again, how can I do that with an usb stick) I also tried this: Ubuntu hits a black screen after boot. Is there any solution without internet? And if I need internet which is the right one? Please explain step by step what I have to write and so on! Thank you! also tried: set gfxpayload=text and: just remove splash and adding vesafb.nonsense=1 to the grub editor, because I couldnt find it anywhere

    Read the article

  • Bizarre SSH Problem - It won't even start

    - by thallium85
    I recently got Ubuntu 12.04 Precise, got it up and running with some MediaWiki software, static IP on the box and router and was able to access the main page even from a cell phone. Everything seemed great... Then I wanted to finally get rid of the monitor and keyboard and login remotely via SSH. I installed openssh-server, let everything point to port 22 for a test run and installed putty on my Windows XP machine. I got a connection refused. Went back and started checking the Ubuntu install itself... (I'm under root from this point on) $ sudo -s $ service ssh status ssh stop/waiting $ service ssh start ssh start/running, process 2212 $ service ssh status ssh stop/waiting Apparently ssh has stopped or is waiting for something.... $ ssh localhost ssh: connect to host localhost port 22: Connection refused I can't even connect to myself... I checked ufw (firewall) to see if port 22 is doing alright... $ sudo ufw status Status: active To Action From 22 ALLOW Anywhere 22/tcp ALLOW Anywhere 22 ALLOW Anywhere (v6) 22/tcp ALLOW Anywhere (v6) sshd_config shows only Port 22 Is ssh not using the right IP address at all? I just don't get what I did wrong here. When this is up and running I will def change the port number, but for now, I don't want to mess with the default install too much until a test run with putty is successful. Edit: Here are my sshd_config file and my ssh_config file. The command /usr/sbin/sshd -p 22 -D -d -e returns: /etc/ssh/sshd_config line 159: Subsystem 'sftp' already defined. Edit: @phoibus moving the sshd_config file and reinstalling did the trick! service ssh status the above command shows that ssh is now running and I am now able to log in from my windows xp computer remotely via putty. Thanks so much! I can now use my monitor for other things!

    Read the article

  • Do these 3 crashes have something in common?

    - by David U
    I'm running OS X 10.6.8 on a Mac Mini. I tried to install 3 applications today and all 3 installations failed. I am wondering if the failures have something in common. First I installed GraphViz. The installation succeeded, but when I try to open any .dot file, I get a dialog that says GraphViz has quit unexpectedly. Next I installed Doxygen. It installed, but when I try to launch it I get a dialog that tells me Doxywizard quit unexpectedly. After some googling I thought perhaps my system lacked QT, and that was the problem. I downloaded the Qt 4.8.4 packages and installed them. But when I try to launch qtdemo.app, or any of the other apps that came with the qt installation, I get a dialog that says I can't open the app because it's not supported on this type of Mac. I have crash logs from GraphViz and Doxygen. They're long and I think it unnecessary to post them unless they would help someone determine my problem. Thanks Excerpt from System Log, added later: 12/13/12 5:26:21 PM [0x0-0x4f04f].com.apple.DiskImageMounter[1322] 2012-12-13 17:26:21.927 DiskImages UI Agent[1333:903] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 5:30:31 PM [0x0-0x1a01a].org.mozilla.firefox[824] [ConvConfHandler] isPreferred contentType: application/x-apple-diskimage 12/13/12 5:35:32 PM DiskImages UI Agent[1384] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 5:35:32 PM [0x0-0x5a05a].com.apple.DiskImageMounter[1376] 2012-12-13 17:35:32.988 DiskImages UI Agent[1384:903] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 6:07:33 PM DisplayLinkUserAgent[772] (00116500.405)-[DLDistributedNotificationCenter stream:handleEvent:] reconnected. 12/13/12 6:07:33 PM [0x0-0x6c06c].backupd-helper[1446] Not starting Time Machine backup after wake - less than 60 minutes since last backup completed. 12/13/12 6:08:43 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/BrotherPPD.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.3-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.3-Patch-2-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.5-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/PIXMA iP6000D 290.pkg 12/13/12 6:14:39 PM com.apple.launchd.peruser.501[359] ([0x0-0x70070].com.att.graphviz[2047]) Job appears to have crashed: Bus error 12/13/12 6:14:41 PM ReportCrash[2056] Saved crash report for Graphviz[2047] version 2.28 (2.28.0) to /Users/duzzell/Library/Logs/DiagnosticReports/Graphviz_2012-12-13-181441_Amun.crash 12/13/12 6:15:19 PM com.apple.launchd.peruser.501[359] ([0x0-0x74074].org.doxygen[2070]) Job appears to have crashed: Bus error 12/13/12 6:15:19 PM ReportCrash[2056] Saved crash report for Doxywizard[2070] version 1.8.2 (???) to /Users/duzzell/Library/Logs/DiagnosticReports/Doxywizard_2012-12-13-181519_Amun.crash

    Read the article

< Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >