Search Results

Search found 31774 results on 1271 pages for 'chris go'.

Page 314/1271 | < Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >

• Partner outreach on the Oracle Fusion Applications user experience begins

  - by mvaughan

  by Misha Vaughan, Architect, Applications User Experience I have been asked the question repeatedly since about December of last year: “What is the Applications User Experience group doing about partner outreach?”  My answer, at the time, was: “We are thinking about it.”  My colleagues and I were really thinking about the content or tools that the Applications UX group should be developing. What would be valuable to our partners? What will actually help grow their applications business, and fits within the applications user experience charter?In the video above, you’ll hear Jeremy Ashley, vice president of the Applications User Experience team, talk about two fundamental initiatives that our group is working on now that speaks straight to partners.  Special thanks to Joel Borellis, Kelley Greenly, and Steve Hoodmaker for helping to make this video happen so flawlessly. Steve was responsible for pulling together a day of Oracle Fusion Applications-oriented content, including David Bowin, Director, Fusion Applications Strategy, on some of the basic benefits of Oracle Fusion Applications.  Joel Borellis, Group Vice President, Partner Enablement, and David Bowin in the Oracle Studios.Nigel King, Vice President Applications Functional Architecture, was also on the list, talking about co-existence opportunities with Oracle Fusion Applications.Me and Nigel King, just before his interview with Joel. Fusion Applications User Experience 101: Basic education  Oracle has invested an enormous amount of intellectual and developmental effort in the Oracle Fusion Applications user experience. Find out more about that at the Oracle Partner Network Fusion Learning Center (Oracle ID required). What you’ll learn will help you uncover how, exactly, Oracle made Fusion General Ledger “sexy,” and that’s a direct quote from Oracle Ace Director Debra Lilley, of Fujitsu. In addition, select Applications User Experience staff members, as well as our own Fusion User Experience Advocates,  can provide a briefing to our partners on Oracle’s investment in the Oracle Fusion Applications user experience. Looking forward: Taking the best of the Fusion Applications UX to your customersBeyond a basic orientation to one of the key differentiators for Oracle Fusion Applications, we are also working on partner-oriented training.A question we are often getting right now is: “How do I help customers build applications that look like Fusion?” We also hear: “How do I help customers build applications that take advantage of the next-generation design work done in Fusion?”Our answer to this is training and a tool – our user experience design patterns – these are a set of user experience best-practices. Design patterns are re-usable, usability-tested, user experience components that make creating Fusion Applications-like experiences straightforward.  It means partners can leverage Oracle’s investment, but also gain an advantage by not wasting time solving a problem we’ve already solved. Their developers can focus on helping customers tackle the harder development challenges. Ultan O’Broin, an Apps UX team member,  and I are working with Kevin Li and Chris Venezia of the Oracle Platform Technology Services team, as well as Grant Ronald in Oracle ADF, to bring you some of the best “how-to” UX training, customized for your local area. Our first workshop will be in EMEA. Stay tuned for an assessment and feedback from the event.

  Read the article

• Development on Windows 7; Web server on Linux - How to share Apache web root?

  - by TheKeys

  I've got a LAMP server that I want to use as a local web server. I've got a Windows 7 machine that I want to use as my development machine. The machines will be on the same LAN (or the Windows box will be VPNed into the LAN). My questions is, what is the best way of sharing the web root of the LAMP server so that I can edit the files on the remote Windows 7 machine and how do I go about configuring this on the Linux machine? (Fedora 16) I would like the solution to be as easy to use as possible with preferably no extra steps required to save/edit/upload files from my IDE on my Windows 7 machine. I'm thinking either a Samba or NFS share are the way to go but I'm concerned I'm going to run into issues with permissions and unix/windows file handling. Is one better than ther other for my use case or is there a better alternative solution? I'm currently using Windows 7 Professional which doesn't have NFS support but would upgrade to Ultimate which does have NFS support if it's the best solution.

  Read the article

• Windows XP laptop doesn't appear in WSUS All computers list

  - by George

  I have this one laptop that doesn't appear in WSUS all computers list. We have about 23-25 PCs/laptops/servers in the network, all, but one are listed in WSUS. This is what I have done so far: 1) Changing Updates on local PC: Go to your Windows XP client and start a new Microsoft Management Console (MMC). At Start, Run, type MMC. Use Ctrl+M to add a new snap-in. Click Add, and then add the Group Policy Object Editor for the Local Computer. Click Close, and then click OK. Expand the Local Computer Policy. Under Computer Configuration, go to Administrative Templates, Windows Components, Windows Update. In the right-hand pane, double-click Specify intranet Microsoft update service location. Configure the settings to reflect my WSUS server. Click OK and then close the MMC without saving it. executed wuauclt.exe /detectnow 2) Edited registry key to be pushed to the PCs using GPO [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate] "WUServer"=http://wsusserver "TargetGroupEnabled"=dword:00000001 "TargetGroup"="WINXP" "WUStatusServer"=http://wsuswerver 3) executed wuauclt /resetauthorization /detectnow 4)Synchronised and refreshed the group I am running out of ideas here. The client is running Windows XP pro, WSUS version is 3.0 and is running on Windows 2008 R2 64-bit. Please, help! Thanks! EDIT 13.IX.2012 @ 15.40 I should have also mentioned that we do have a Windows Update GPO for workstations group and that laptop is a part of that group.

  Read the article

• How to have SSL on Amazon Elastic Load Balancer with a Gunicorn EC2 server?

  - by Riegie Godwin

  I'm a self taught back end engineer so I'm learning all of this stuff as I go along. For the longest time, I've been using basic authentication for my users. Many developers are advising against this approach since each request will contain the username & password in clear text. Anyone with the right skills can sniff on the connection between my iOS application and my Django/Gunicorn Server and obtain their password. I wouldn't want to put my user's credentials at risk so I would like to implement a more secure way of authentication. SSL seems to be the most viable option. My server doesn't serve any static content or anything crazy of that sort. All the server does is send and receive "json" responses from and to my iOS application. Here is my current topology. iOS application ------ Amazon Elastic Load Balancer ------- EC2 Instances running HTTP Gunicorn. Gunicorn runs on port 8000. I have a CNAME record from GoDaddy for the Amazon Elastic Load Balancer DNS. So instead of using the long DNS to make requests, I just use server.example.com. To interact with my servers I send and receive requests to server.example.com:8000/ This setup works and has been solid. However I need to have a more secure way. I would like to setup SSL between my iOS application and my Elastic Load Balancer. How can I go about doing this? Since I am only sending json responses to my application, do I really need to buy a certificate from a CA or can I create my own? (since browsers will not be interacting with my servers. My servers are only designed to send json responses to my iOS application).

  Read the article

• Failover strategy for a 4 servers scenario

  - by Joao Villa-Lobos

  Hi all, I am trying to figure out how to set up replication & failover in a scenario with 4 servers (2 per location) where any server may assume the Master role. My initial scenario is the following one: 2 servers in location A (One Master, One Slave); 2 servers in location B (Two Slaves). For this I'm thinking on using the configuration Master-Master Active-Passive suggested on O'Reilly's "High Performance MySQL" on all of them so each one can become a Master when needed. If the Master "dies" the other server from location A assumes the Master role whenever possible. It will always have a bigger priority then the servers on location B. A server on location B will only switch to Master if no server on location A is able to do so. Since MySQL can't handle this automatically I need some other way to implement this. I've read already about heartbeat and Maatkit. Is this the way to go? Has anyone used this in a similar scenario? Is there some other way to go in order to achieve this? Any pointers about failout will be appreciated. I want to keep this as simple as possible avoiding stuff such as DRDB. I'm not concerned about high availability just a way to switch roles automatically without too many hassle. I'm using SuSe Enterprise 10 and MySQL 5.1.30-community. Thanks in advance, João

  Read the article

• Resource Monitor (resmon) in Windows Server 2008 R2

  - by Clever Human

  In Windows Server 2008 R2's Resource Monitor, is there a way to set the scale of the various graphs to be constant values instead of variable based on data? It seems to me that the utility of a graph is to get a quick overview glance at the values those graphs are showing. So if I look at the CPU graph and the line is up near the top, I can know immediately that something is using all my CPU and go investigate what. I don't really care if the CPU is jumping between .01% and 2%. Or if the network usage monitor is up near the top, I will know that all my bandwidth is being used up, and go figure out what. But the way things are now, the graphs are meaningless because the scales constantly shift. If you look at the network usage graph in one second it might have a scale out of 100kbps, and the next second have a scale based on 1mbps! So... is there a registry key or something that will peg the scale of these graphs to logical maximums? (the graph on the right hand side of the screenshot below):

  Read the article

• Liferay - Verify each node in a cluster

  - by Schrute

  In this example, I have two clustered instances of Liferay using bundled Tomcat running, using cluster link and shared documents. Let's say the name of the public community is fubar and friendy URL used is fubar.lipsum.com. Let's say the ports listening on each server is 8080. If I go to both server1:8080 or server2:8080 I will get the default page for Liferay. How can I test fubar.lipsum.com on each node by using the backend server, so I can verify each server? If I test it, it just goes to the load balancer, I wish there was a way to append to the backend connection to bring it up. I can add the friendly URL to my local machines hosts file and this seems to kinda work, but then once something is called in the application, it tries to go out again from the backend server and then uses SSL and then we have problems. I think I may be able to do port forwarding, but this seems like a basic thing we should be able to do and what I've found so far in the admin docs has not helped. Using the option to print the server name in the page details isn't an option either.

  Read the article

• Setup Entourage for Exchange via HTTP communication

  - by Johandk

  Our ISP set up a hosted exchange server for all our mail. I've setup all our Outlook users with no problems. We have two people using Mac OSX Leopard and Entourage. Entourage has the option of adding an Exchange account, but I have no idea how to tell it to connect to exchange via HTTP. Heres an excerpt from the client setup docs the hosting company sent me for Outlook: 1 .Go to control panel 2. Select ‘Mail’ 3. Select ‘Email accounts’ Under the E-mail tab select ‘New’ Select ‘Manually configure server settings......’ - click next Select ‘Microsoft Exchange’ – click next Complete details as below with Microsoft Exchange Server as: [server address] Do not select ‘Check Name’. Instead select ‘More Settings’. Go to the Connection tab, and select the bottom option ‘Connect to Microsoft Exchange using HTTP’. And then select the ‘Exchange Proxy Settings’ button. Enter Proxy server for Exchange Check Only connect to proxy servers that have this principal name in their certificate, Enter msstd:[servername] Proxy Authentication - select Basic Authentication Select OK, and again, so that you return to the main screen. Now select ‘Check Name’. Enter Username and Password: The username should now be the full name and underlined. If so select next, and then finish. Next time you open Outlook, enter username and password Any help GREATLY appreciated.

  Read the article

• adding or routing additional domain email addresses

  - by Mustafa Ismail Mustafa

  We have exchange 2007 and we bought a new domain name and we're still keeping the old one so that we can wean everyone off of the old emails. Now, I'm wondering how to go about this. I need to add the new domain as accepted and authoritative by the exchange server. Emails on the new domain need to get routed to the inbox and ditto the old emails, however, I want to be able to change the reply-to in the header to the new email address automatically. I also want to set the new email addresses as the defaults. Ideally, I'd like to be able to add a message at the bottom of every externally outgoing email saying that the new email is [email protected]. But this is a nice to have, certainly not a must have. I've added the new domain as authoritative, and managed to change the primary smtp email addresses to the new one, but sent emails are not being routed to them and neither are the old email addresses! Now how the heck would I go about fixing all of that? I'm completely stumped! TIA

  Read the article

• Suggestions for Windows 8 migration [closed]

  - by Big Endian

  I'm thinking of migrating to Windows 8. At first I hated it, but I'm pretty sure the Windows 8 model is the future, and I don't particularly want to end up hating the future like my parents, frustrated and bewildered by anything past Windows XP. I'm currently running Windows 7 and my system has been accumulating some problems. It's probably an accumulation of issues from installing too much software, changing firewall settings, installing Ubuntu alongside Windows, and... well I'm not sure, but my computer has been buggy in unexpected ways lately (freezing and unfreezing, display driver crashing and recovering, and what I call "deep freeze/thaw cycle" where the mouse won't even move for a while). I'm good at solving computer problems, but I can't seem to get to the root of these and my best idea for fixing them is making sure I've backed up every file then re-installing the entire OS. Luckily for me, a new OS is just around the corner so this would be a good time to get two things out of the way at once. The problem I see is that the upgrade options I see are all "seamless". I don't want a seamless upgrade. I want to wipe the slate clean and start all over. Does this mean I will have to buy a full, new copy of Windows 8 rather than one of the cheaper upgrading options? Or does it not make since for me to go to Windows 8 given that I have a laptop, not a tablet? Maybe I should just re-install Windows 7, or even call good enough good enough, try to eliminate the bugs, and start with a fresh slate in 2-3 years after this computer eventually dies entirely from (inevitable) hardware failure. What would be the advantages or disadvantages and costs of each option, how would I go about upgrading to Windows 8 if that's the option I choose, and what is your personal opinion about my situation?

  Read the article

• Gmail.com detect mail as spam, but the server is not on any BlackList

  - by Tomer W

  I have an issue with Google. (GMail to be exact) About 1 month ago, we had a security breach, and mail was relayed through our servers. we got listed in almost ALL Black-Lists :( we fixed the problem, and requested removal from Black-lists, which was granted easily. currently (over 3 weeks), we are not sending any spam anymore. furthermore, we got clear from all the Black-lists (MxToolBox Black-List Search Result) But, GMail still refuse to get Anything from the server, stating '550 Spam'. Following, Telnet attempt to send to gmail: 220 mx.google.com ESMTP g47si45436208eep.123 helo megatec.co.il 250 mx.google.com at your service mail from: <[email protected]> 250 2.1.0 OK g47si45436208eep.123 rcpt to: <[email protected]> 250 2.1.5 OK g47si45436208eep.123 Data 354 Go ahead g47si45436208eep.123 Test123 . 550-5.7.1 [62.219.123.33 11] Our system has detected that this message is 550-5.7.1 likely unsolicited mail. To reduce the amount of spam sent to Gmail, 550-5.7.1 this message has been blocked. Please visit 550-5.7.1 http://support.google.com/mail/bin/answer.py?hl=en&answer=188131 for 550 5.7.1 more information. g47si45436208eep.123 Connection to host lost. i tried filling the form @ Gmail - Report Delivery Problem i also tried reaching Google by phone, but the message was to go to the Link mentioned above. I Checked ReverseDNS and is ok... We dont have TLS, but that shouldn't be a problem, shouldn't it? Note: we are not a Bulk sender. Anyone has an idea? what can be blocking our IP? Anyone know whom can be contacted in order to resolve this BL listing?

  Read the article

• Outlook 2007, how to stop replies from being sent if they meet criteria

  - by CChriss

  I have my college's email account auto-forwarded (they don't offer pop3 or imap) to my main gmail account so I don't have to go to their website to check for mail. That gmail account, and others, use pop3 down to my Outlook 2007. In my Outlook, I have a rule that puts mail sent to my @college address into a folder named Collegemail. Since the college email system lacks pop3 or imap, I have to go to their site to send a reply, so that the reply will be sent from my @college email address. The problem is that I cannot seem to get into the habit of going to my college's website to reply to those emails, so quite often I reply to them while in Outlook, which means my replies are sent "from" my main gmail address. How can I set up Outlook to either 1) disable replying to emails in the Collegemail folder or to emails where my college email address is in the original To: line, or else 2) set it to send those replies from a non-functional dummy account. The dummy account would be unable to send the email so the email would be stuck in the Outbox. (I already have the non-functional dummy account set up as Outlook's "Default" account. When I compose a new mail I have to deliberately pick one of my good accounts to send the new mail with, or else Outlook uses the default dummy account and the email stays in the Outbox with a Send error.) Thanks. Update: Anybody? Please help.

  Read the article

• Windows Virtual Machines will not run

  - by jlego

  I'm trying to setup a few virtual machines to use for testing websites in the various old versions of IE. I had Microsoft Virtual PC working on an older machine using XP mode and 2 other VHD's from Microsoft that allowed me to test in IE6-IE8. I've recently gotten a new work machine and am trying to set up the VMs again for testing, however nothing seems to be working. Both the old and the new system run Windows 7 64-bit Ultimate with AMD processors. I downloaded Virtual PC & XP mode from here http://www.microsoft.com/windows/virtual-pc/download.aspx and go through the installation process. XP mode is installed, but when I try to run it it goes through the initial setup process only to fail when it is almost complete with the error "Cannot Complete Setup". (After googling I see that this might be a conflict with my processor) I download other VHD's from here http://www.microsoft.com/windows/virtual-pc/download.aspx in order to get the other versions of IE and try to set those up in Virtual PC as well. I click on them to start the machine and both Windows 7 with IE8 and Windows Vista with IE7 just hang at a black screen. I try to use Virtual Box instead, and I get Windows XP with IE6 running, but I have no internet connection in the VM. I try all different settings and try to google the correct settings but nothing seems to work. When I load the VM, XP shows that its found new hardware but it needs the drivers. One of these pieces of hardware is the network adapter, but I can't connect to the internet to download the driver in the guest OS. VirtualBox tells me I need to install extensions in order for things to function properly. I go through the installation process in the guest OS and restart the VM, however now XP is asking for validation and I can't access the VM. I try installing the other 2 OS (Vista & 7) but I get a BSOD right after the startup screen appears and the VM restarts itself. I'm getting so frustrated trying to make this work, I would really appreciate any assistance on getting the VMs up and running or any alternatives for testing websites in Internet Explorer.

  Read the article

• Multicast image restoration with adaptive speed

  - by Clinton Blackmore

  I'm curious to know if there are any tools for restoring disk images (or even transferring files) via multicast -- for any platform, especially if the project has source available -- where the multicast rate adjusts itself on the fly. On the Mac, all multicast solutions I am aware of (such as Deploy Studio, and NetRestore before it) make use of multicast ASR (apple software restore), which has one glaring deficiency -- you have to set the multicast speed before you start sending a disk image over the network, and that speed is locked in. Either your clients can keep up and restore, or they can't*. It seems to me that it must be possible for the multicast server to adjust the data rate, so you basically say "start sending this image", clients connect, and, if they can't keep up, they tell the server so it slows down. (Likewise, I'd expect the server to try speeding up if no client is having difficulties keeping up, and I'd expect to be able to cap that maximum throughput so that other network activities can go on without being resource starved.) So, what sort of tools are out there? For Linux? Windows? Is there something for the Mac I've overlooked. [It just kills me that it is true that, by the time you get multicast up and going at a good speed to restore a lab, you could've unicasted the data to all the computers and be done.] * There is a little leeway involved. I think individual clients can say, "I missed a little bit of data" and get it, and they can opt to listen in the next time the image is sent over the network, but on the whole, if they missed it the first go round, you have to image the machine again, and there is no time savings.

  Read the article

• Reduce power consumption of gaming computer while idle

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

  Read the article

• Is there a quick way of undoing a folder change in Far Manager?

  - by Johannes Rössel

  I love Far Manager. However, it has a feature to quickly go to the root directory of a drive with Ctrl+\. I do sometimes need and use this feature, but more frequently I use Ctrl+? to quickly insert the file name under the cursor into the command line. As it so happens, the ? key is located dangerously close to \ which is why I sometimes erroneously go the root directory (which then is doubly unfortunate since I originally wanted to work with a file in the directory I was in). Now I could probably just redefine Ctrl+\ to do nothing, although I still sometimes need that (can be replicated with a quick cd\, though). But Windows Explorer, in the wake of the WWW, provided us with a handy directory history and two separate ways of navigating backwards: backwards through the history and backwards through the hierarchy. Is there something quick and easy to get back to the folder I were in? This is less of an issue in C:\Users\Me (still nagging) but more so in deeper hierarchies.

  Read the article

• Use Mac OS X Server As Development Environment

  - by macinjosh

  I've installed Mac OS X Server 10.6.3 on my laptop to use as my normal OS. I do a lot of web development and thought it would be handy to run OS X Server so I could more easily manage my local development environment (Apache Virtual Hosts, Hostnames for each local site, etc). I'm really enjoying the new setup except for one problem. DNS. My ideal situation would be to add a site (some-site.local) in the Web Service and then go to the DNS Service and add a primary record for the new site. I actually got this working at one point but after a reboot it stopped working! The records look the same as they did before the reboot but the site doesn't come up in Safari. Here is a list of my needs: Need to be able to add new domains at a whim Domains always map to a site on the same box's Web Service Local & External IPs often change It would nice if it worked on any network (i.e. WiFi at the airport or coffee shop) Sites only need to be accessible locally Configuration should stay put even after rebooting I've done some googling and used this as a bit of guide. In the past I've used MAMP and then just a local Apache/PHP/MySQL install with a manually managed hosts file. I'd rather not go back.

  Read the article

• How to remap IPs visible from local machine to IPs visible from a machine I have SSH access to?

  - by gooli

  I'm so far out of my depth I don't even know what to google for. There's a server I can connect to via SSH. Via that server I can access other server on its subnet via SSH. What I want to do is be able to access the machines that server has access to directly. Say the server IP is 192.168.7.7 and is the only one in the 192.168.x.x range I have access to. I'd like to configure things in such a way that when I to access say 192.168.7.100 on my machine, the connection will go through an SSH tunnel I open to 192.168.7.7 and out to 192.168.7.100. I would like this to work for any port if at all possible. I know I can set an HTTP proxy and even a SOCKS proxy, but I'm wondering is there is a way to actually remap some of the IP my machine sees to IP only visible from the remote machine. What would this configuration be called? IS this NAT, VPN, IP2IP or something else? How can I set up this on a Windows client box that connects via SSH to a Linux box? Sounds to me like I need to set up some kind of filtering on the network driver or possibly a virtual NIC, but I'm not sure where to go next.

  Read the article

• Adding add-ins to excel - strange communicates

  - by Jacob

  I am using Excel 2010 and 2013. I would like to add an excel add-in from page http://xlloop.sourceforge.net/ . There is file with name xlloop-0.3.2 and extension Microsoft Excel XLL Add-In. I added this file from menu File - Options - Add-Ins - In combobox Manage i choosed Excel Add-Ins - Go... - Browse and I choosed my file. I see the following comunicate: "C:\...\xlloop-0.3.2.xll" is not a valid add-in. Thus, I do next attempt. I go from menu File - Open - and I choosed my file. I see comunicate: The file you are trying to open "xlloop-0.3.2.xll", is in a difference format than specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now? After I clicked Yes I see a lot of signs (something like from chinese :)) My last attempt was double clicked on file. I see: The file format and extension of "xlloop-0.3.2.xll" don't match. The file could be corrupted or unsafe. Unless you trust its source , don't open it. Do you want open it anyway? After clicked yes I see something like the second attempt. I am really very confused because some of my friends have the same version of excel and they don't have these communicates. Do you have any idea where is the problem in my excel? I very need this addin to work with Java. I will very grateful for your help! Thanks in advance!

  Read the article

• How do I find information about a particular trojan? "W32/Smalltroj.XVGT", as reported by Norman

  - by Lasse V. Karlsen

  I tried checking the Norman antivirus page, Virus-descriptions, but sadly it seems Norman has intentionally obfuscated their search results (I tried clicking on W, and it seems they just list viruses with a W somewhere in the description, instead of more typical, all viruses with a name starting with a W.) Is there a common virus-list somewhere, or is it as I suspect, every antivirus manufacturer is free to come up with their own identification tags for each virus? Several "vshost32.exe" files, related to Microsoft Visual Studio 2008, has been quarantined on our server today, probably related to a test-deployment of some internal software. Some developer machines that have grabbed that latest version of our program has also had the same files quarantined. Now, these files should not have been deployed in the first case, so I'll be looking into that, but whenever any developer now builds a program locally and attempts to debug, the same file is placed in the build output directory, and promptly quarantined. Does anyone have any clues as to how I can go about verifying this before I pointedly ask the antivirus software to go take a hike on this particular virus? Edit: I've copied one of the quarantined files manually to a machine over the network that doesn't have antivirus installed, and compared the file on that machine with a local copy (on that machine) of the vshost32.exe template file, and they're bit-for-bit identical. I guess this is a false positive. I still would like to know if it would be possible for me to verify this in any other way though, since next time such a trojan might be reported in a compiled file that we won't have a pristine copy of.

  Read the article

• OpenVPN: ifup tap0 drops all connections

  - by raspi

  I'm trying to create star shaped "virtual" LAN with OpenVPN which is not connected to physical network. ie. tap0 packets should not go to eth0. Packet should only go through OpenVPN to connected clients. This setup works with my OpenVPN testing machine which runs Virtual Box but not on my actual server which is running on top of Xen. Both servers are running Ubuntu Intrepid. /etc/network/interfaces: iface tap0 inet manual address 10.10.10.1 netmask 255.255.255.0 gateway 10.10.10.1 /etc/openvpn/server.conf mode server tls-server port 1194 proto udp dev tap client-to-client ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/servername.crt key /etc/openvpn/easy-rsa/keys/servername.key dh /etc/openvpn/easy-rsa/keys/dh384.pem ifconfig-pool-persist ipp.txt server-bridge 10.10.10.1 255.255.255.0 10.10.10.128 10.10.10.250 push .route 10.10.10.1 255.255.255.0 keepalive 5 60 comp-lzo persist-key persist-tun status /var/log/openvpn-status.log log-append /var/log/openvpn.log verb 3 user nobody group nogroup ifup tap0 on Virtual Box: everything ok, SSH keeps running. But on Xen SSH connection drops and I have to reboot whole machine. What I'm missing?

  Read the article

• How to get bearable 2D and 3D performance on AMD Radeon HD 6950?

  - by l0b0

  I have had an AMD Radeon HD 6950 (i.e., Cayman series) for a couple years now, and I have tried a lot of combinations of drivers and settings with terrible results. I'm completely at a loss as to how to proceed. The open source driver has much better 2D performance, but it offloads all OpenGL rendering to the CPU. What I've tried so far: All the latest stable Ubuntu releases in the period, plus one Linux Mint release. All the latest stable AMD Catalyst Proprietary Display Drivers, and currently 13.1. The unofficial wiki installation instructions for every Ubuntu version and the semi-official Ubuntu instructions. All the tips and tweaks I could find for Minecraft (Optifine, reducing settings to minimum), VLC (postprocessing at minimum, rendering at native video size), Catalyst Control Center (flipped every lever in there) and X11 (some binary toggles I can no longer remember). Results: Typically 13-15 FPS in Minecraft, 30 max (100+ in Windows with the same driver version). Around 10 FPS in Team Fortress 2 using the official Steam client. Choppy video playback, in Flash and with VLC. CPU use goes through the roof when rendering video (150% for 1080p on YouTube in Chromium, 100% for 1080p H264 in VLC). glxgears shows 12.5 FPS when maximized. fgl_glxgears shows 10 FPS when maximized. Hardware details from lshw: Motherboard ASUS P6X58D-E CPU Intel Core i7 CPU 950 @ 3.07GHz (never overclocked; 64 bit) 6 GB RAM Video card product "Cayman PRO [Radeon HD 6950]", vendor "Hynix Semiconductor (Hyundai Electronics)" 2 x 1920x1200 monitors, both connected with HDMI. I feel I must be missing something absolutely fundamental here. Is there no accelerated support for anything on 64-bit architectures? Does a dual monitor completely mess up the driver? $ fglrxinfo display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6900 Series OpenGL version string: 4.2.11995 Compatibility Profile Context $ glxinfo | grep 'direct rendering' direct rendering: Yes I am currently using the open source driver, with the following results: Full frame rate and low CPU load when playing 1080p video. Black screen (but music in the background) in Team Fortress 2. Similar performance in Minecraft as the Catalyst driver. In hindsight obvious, since both end up offloading the rendering to the CPU. My /var/log/Xorg.0.log after upgrading to AMD Catalyst 13.1. Some possibly important lines: (WW) Falling back to old probe method for fglrx (WW) fglrx: No matching Device section for instance (BusID PCI:0@3:0:1) found The generated xorg.conf. The disabled "monitor" 0-DFP9 is actually an A/V receiver, which sometimes confuses the monitor drivers when turned on/off (but not in Windows). All three "monitor" devices are connected with HDMI. Edit: Chris Carter's suggestion to use the xorg-edgers PPA (Catalyst 13.1) resulted in some improvement, but still pretty bad performance overall: Minecraft stabilizes at 13-17 FPS, but at least the CPU load is "only" at 45-60%. Still 150% CPU use for 1080p video rendering on YouTube in Chromium. Massive improvement for 1080p H264 in VLC: 40-50% CPU use and no visible jitter glxgears performance about doubled to 25-30 FPS when maximized. fgl_glxgears still at ~10 FPS when maximized.

  Read the article

• I Made Wordpress Multisite. And Now Everything Doesn't Display Properly

  - by piratepartypumpkin

  I installed Ubuntu 10.4 then I installed Bitnami LAMP stack then I installed bitnami wordpress module then I tried to make the site into a multisite by following these instructions: http://wiki.bitnami.org/Applications/BitNami_WordPress_Multisite#How_to_add_several_WordPress_Multisite_blogs_with_different_domains.3f AND http://wiki.bitnami.org/Applications/BitNami_WordPress_Multisite I can elaborate if needed: I enabled multisite in my wp-config.php file. Then I created a network using the wordpress dashboard. I was given two blocks of text to copy and paste 1 block into my wp-config.php file and one into my .htaccess file. I did that and now I get this: When I go to my mywebsite.com I get this (this was there before I switched to multisite): If I go to mywebsite.com/wordpress I get this (this used to be a functioning wordpress theme): If I click on "My Blog" it redirects to 1mywebsite.com (where the "1" came from I have no idea) If I try to login by going to mywebsite.com/wordpress/wp-login I get this: and if I enter my user and password it redirects me to mywebsite.com/wp-login.php and gives me "Not Found" The requested URL /wp-login.php was not found on this server. NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /opt/lampstack-5.3.16-0/apps/wordpress ServerName mywebsite.com ServerAlias www.mywebsite.com </VirtualHost>

  Read the article

• Oracle OpenWorld 2012: Oracle Developer Cloud, ADF-Essentials, ADF Mobile and ME!

  - by Dana Singleterry

  This year at OOW, like those from the past, will certainly be unforgettable. Lots of new announcements which I can't mention here and may not event know about are sure to surprise. I'll keep this short and sweet. For every session ADF, ADF Mobile, Oracle Developer Cloud, Integration with SOA Suite, etc... take a look at the ADF Focus Document listing all the sessions ordered by day providing time and location. For Mobile specifically check out the Mobile Focus Document. OOW 2012 actually kicks off on Sunday with Moscone North demogrounds hosting Cloud. There's also the ADF EMG User Day where you can pick up many technical tips & tricks from ADF Developers / ACE Directors from around the world. A session you shouldn't miss and a great starting point for the week if you miss Sunday's ADF EMG User Day for all of you TechoFiles is Chris Tonas's keynote for developers - Monday 10:45 am at Salon 8 in the Marriott - The Future of Development for Oracle Fusion - From Desktop to Mobile to Cloud. Then peruse the ADF Focus Document to fill out your day with the many sessions and labs on ADF. Don't forge that Wednesday afternoon (4:30 - 5:30) offers an ADF Meetup which is an excellent opportunity to catch up with the Shakers and Makers of ADF from Product Managent, to customers, to top developers leveraging the ADF technology, to ACE Directors themselves. Not to mention free beer is provided to help you wind down from a day of Techno Overload. Now for my schedule and I do hope to see some of you at one of these. OOW 2012 Schedule 10/1 Monday 9:30am – 12:00pm: JDev DemoGrounds 3:15pm – 4:15pm: Intro to Oracle ADF HOL; Marriott Marquis – Salon ¾ 4:00pm – 6:00pm: Cloud DemoGrounds 10/2 Tuesday 9:45am – 12:00pm: JDev DemoGrounds 2:00pm -4:00pm: Cloud DemoGrounds 7:30 – 9:30: Team Dinner @ Donato Enoteca; Redwood City 10/3 Wednesday 10:15pm – 11:15pm: Intro to Oracle ADF HOL; Marriott Marquis – Salon 3/4 1:15pm – 2:15pm: Oracle ADF – Lessons Learned in Real-World Implementations; Moscone South – Room 309This session takes the form of a panel that consists of three customer: Herbalife, Etiya, & Hawaii State Department of Education. During the first part of this session each customer will provide a high-level overview of their application. Following this overview I'll ask questions of the customers specific to their implementations and lessons learned through their development life-cycle. Here's the session abstract: CON3535 - Oracle ADF: Lessons Learned in Real-World Implementations This session profiles and interviews customers that have been successful in delivering compelling applications based on Oracle’s Application Development Framework (Oracle ADF). The session provides an overview of Oracle ADF, and then three customers explain the business drivers for their respective applications and solutions and if possible, provide a demonstration of the applications. Interactive questions posed to the customers after their overview will make for an exciting and dynamic format in which the customers will provide insight into real-world lessons learned in developing with Oracle ADF. 3:30pm – 4:30 pm: Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile; Marriott Marquis – Salon 10A 4:30pm – 6:00pm: Meet and Greet ADF Developers/Customers; OTN Lounge 10/4 Thursday   11:15pm – 12:15pm: Intro to Oracle ADF HOL; Marriott Marquis – Salon 3/4 I'm sure our paths will cross at some point during the week and I look forward to seeing you at one of the many events. Enjoy OOW 2012!

  Read the article

• How do you automatically close 3rd party applications when LiberKey is shut down?

  - by NoCatharsis

  Within LiberKey, I have added my own portable applications that are not included within the LiberKey library. When you go into the Properties menu for the app in the LiberKey UI, the Advanced tab has an option for Autoexecute. This dropdown menu seems to have no visible effect, at least on my current installation. I found that I could right click within the primary GUI and select "Add software group", add all 3rd party applications, then go to the Advanced tab within THAT Properties screen and select Autoexecute - "Always on startup". This solved the problem for starting the apps when LiberKey starts. However, now I'm having the same issue when closing out LiberKey. I have created a new 3rd party app that calls the same .exe, but sends the Parameter "/close". I then went to the Advanced tab and selected Autoexecute - "Always on shutdown". Seems pretty logical right? But the apps will not close on LiberKey shutdown. I cannot handle the app close-outs in the same way with a software group, as I did with the startup issue because the Autoexecute drop-down does not have an "Always on shutdown" option. Unfortunately, many of the Q&A forums on liberkey.com are in French and I took Spanish in high school. Otherwise I've not been able to find a workable answer. Any suggestions?

  Read the article

< Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >