django shell - Page 314

Slow Memcached: Average 10ms memcached `get`

- by Chris W.

We're using Newrelic to measure our Python/Django application performance. Newrelic is reporting that across our system "Memcached" is taking an average of 12ms to respond to commands. Drilling down into the top dozen or so web views (by # of requests) I can see that some Memcache get take up to 30ms; I can't find a single use of Memcache get that returns in less than 10ms. More details on the system architecture: Currently we have four application servers each of which has a memcached member. All four memcached members participate in a memcache cluster. We're running on a cloud hosting provider and all traffic is running across the "internal" network (via "internal" IPs) When I ping from one application server to another the responses are in ~0.5ms Isn't 10ms a slow response time for Memcached? As far as I understand if you think "Memcache is too slow" then "you're doing it wrong". So am I doing it wrong? Here's the output of the memcache-top command: memcache-top v0.7 (default port: 11211, color: on, refresh: 3 seconds) INSTANCE USAGE HIT % CONN TIME EVICT/s GETS/s SETS/s READ/s WRITE/s cache1:11211 37.1% 62.7% 10 5.3ms 0.0 73 9 3958 84.6K cache2:11211 42.4% 60.8% 11 4.4ms 0.0 46 12 3848 62.2K cache3:11211 37.5% 66.5% 12 4.2ms 0.0 75 17 6056 170.4K AVERAGE: 39.0% 63.3% 11 4.6ms 0.0 64 13 4620 105.7K TOTAL: 0.1GB/ 0.4GB 33 13.9ms 0.0 193 38 13.5K 317.2K (ctrl-c to quit.) ** Here is the output of the top command on one machine: ** (Roughly the same on all cluster machines. As you can see there is very low CPU utilization, because these machines only run memcache.) top - 21:48:56 up 1 day, 4:56, 1 user, load average: 0.01, 0.06, 0.05 Tasks: 70 total, 1 running, 69 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.3%st Mem: 501392k total, 424940k used, 76452k free, 66416k buffers Swap: 499996k total, 13064k used, 486932k free, 181168k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 6519 nobody 20 0 384m 74m 880 S 1.0 15.3 18:22.97 memcached 3 root 20 0 0 0 0 S 0.3 0.0 0:38.03 ksoftirqd/0 1 root 20 0 24332 1552 776 S 0.0 0.3 0:00.56 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 5 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kworker/u:0 6 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0.0 0.0 0:00.62 watchdog/0 8 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cpuset 9 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper ...output truncated...

Read the article

Setting up nginx as proxy to apache; All good, but nginx doesn't serve media

- by becomingGuru

I have set it up such that nginx proxies request and sends django requests to apache and serves media itself. Following documents my setup: Nginx Configuration: /etc/nginx/nginx.conf user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; access_log /var/log/nginx/access.log; sendfile on; tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; include /etc/nginx/sites-enabled/*; } ===== ngnix proxy /etc/nginx/proxy.conf ============ proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; =========== Nginx server file: /etc/nginx/sites-enabled/some-name.txt ========== server { listen 208.109.252.110:80; server_name netconf; autoindex on; access_log /home/site/server_logs/nginx_access.log; error_log /home/site/server_logs/nginx_error.log; location / { proxy_pass http://127.0.0.1:80/; include /etc/nginx/proxy.conf; } location /site_media/ { root /home/site/folder/static; } } ========== Nginx very well proxies the request and passes to apache, the required requests, but doesn't serve the media. In the last server file, location site_media is not served, at all. :( Everything seems perfect to me. What is wrong? Thanks in advance.

Read the article

Apache server completely freezes until it gets restarted

- by nbv4

My server does this every few days. What sucks is that it always seems to do this right after I go to bed, so when I wake up, I'm greeted with the fact that my server has been down for the past 6 or 7 hours. When I first noticed this, I added a cronjob that tries to restart the server every 15 minutes, but I guess that didn't fix it. Once I noticed the server was down, I can this command: /etc/init.d/apache2 restart * Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName ... waiting ...........................................................apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName httpd (pid 17597) already running ...which is odd, because a restart should restart the server, even if it's already running, correct? I eventually had to "stop" then "start" to get it working again. I then looked through the logs, and found something very weird. It seems that around the time the server crashed, the logs have entries that are wildly out of order. It looks a little like this: xx.xxx.xxx.x - - [21/Apr/2010:06:32:05 -0400] "GET / blah" xx.xxx.xxx.x - - [21/Apr/2010:06:51:25 -0400] "GET / blah" x.xx.xxx.xxx - - [21/Apr/2010:06:38:23 -0400] "GET / blah" xxx.xx.xx.xx - - [21/Apr/2010:06:31:56 -0400] "GET / blah" xxx.xx.xx.xx - - [21/Apr/2010:06:51:49 -0400] "GET / blah" xx.xx.xxx.xx - - [21/Apr/2010:06:33:20 -0400] "GET / blah" I don't think the problem is memory, because this: tells me that right before the crash, memory usage is fine. I'm running apache with the worker mpm, here are the settings for that: <IfModule mpm_worker_module> StartServers 1 MaxClients 100 MinSpareThreads 5 MaxSpareThreads 10 ThreadsPerChild 10 MaxRequestsPerChild 3000 </IfModule> This apache server is running a bunch of stuff, but most of the traffic comes from a django project I'm hosting, that uses mod_wsgi. There also is a simple machines forum that is running off of mod_fcgid. Those setting are below: <IfModule mod_fcgid.c> MaxRequestsPerProcess 500 MaxProcessCount 3 AddHandler fcgid-script .php .fcgi AddHandler cgi-script .cgi .pl FCGIWrapper "/usr/bin/php-cgi" .php </IfModule> Anyone know of anything else I can check? I've just about tweaked every single setting I can think of, yet these freezes still happen.

Read the article

Varnish server in front of nginx server with multiple virtualhosts

- by Garreth 00

I have tried to search for a solution for this, but can't find any documentation/tips on my specific setup. My setup: Backendserver: ngnix: 2 different websites (2 top domains) in virtualenv, running gunicorn/python/django Backendserver hardware(VPS) 2gb ram, 8 CPU Databaseserver: postgresql - pg_bouncer Backendserver hardware (VPS) 1gb ram, 8 CPU Varnishserver: only running varnish Varnishserver hardware (VPS) 1gb ram, 8 CPU I'm trying to set up a varnish server to handle rare spike in traffic (20 000 unique req/s) The spike happens when a tv program mention one of the sites. What do I need to do, to make the varnish server cache both sites/domains on my backendserver? My /etc/varnish/default.vcl : backend django_backend { .host = "local.backendserver.com"; .port = "8080"; } My /usr/local/nginx/site-avaible/domain1.com upstream gunicorn_domain1 { server unix:/home/<USER>/.virtualenvs/<DOMAIN1>/<APP1>/run/gunicorn.sock fail_timeout=0; } server { listen 80; listen 8080; server_name domain1.com; rewrite ^ http://www.domains.com$request_uri? permanent; } server { listen 80 default_server; listen 8080; client_max_body_size 4G; server_name www.domain1.com; keepalive_timeout 5; # path for static files root /home/<USER>/<APP>-media/; location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (!-f $request_filename) { proxy_pass http://gunicorn_domain1; break; } } } My /usr/local/nginx/site-avaible/domain2.com upstream gunicorn_domain2 { server unix:/home/<USER>/.virtualenvs/<DOMAIN2>/<APP2>/run/gunicorn.sock fail_timeout=0; } server { listen 80; listen 8080; server_name domain2.com; rewrite ^ http://www.domains.com$request_uri? permanent; } server { listen 80; listen 8080; client_max_body_size 4G; server_name www.domain2.com; keepalive_timeout 5; # path for static files root /home/<USER>/<APP>-media/; location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (!-f $request_filename) { proxy_pass http://gunicorn_domain2; break; } } } Right now, If I try the Ip of the varnishserver I only get served domain1.com. Would everything be correct if I change the DNS of the two domain to point to the varnishserver, or is there extra setup before it would work? Question 2: Do I need a dedicated server for varnish, or could I just install varnish on my backendserver, or would the server run out of memory quick?

Read the article

Tips for maximizing Nginx requests/sec?

- by linkedlinked

I'm building an analytics package, and project requirements state that I need to support 1 billion hits per day. Yep, "billion". In other words, no less than 12,000 hits per second sustained, and preferably some room to burst. I know I'll need multiple servers for this, but I'm trying to get maximum performance out of each node before "throwing more hardware at it". Right now, I have the hits-tracking portion completed, and well optimized. I pretty much just save the requests straight into Redis (for later processing with Hadoop). The application is Python/Django with a gunicorn for the gateway. My 2GB Ubuntu 10.04 Rackspace server (not a production machine) can serve about 1200 static files per second (benchmarked using Apache AB against a single static asset). To compare, if I swap out the static file link with my tracking link, I still get about 600 requests per second -- I think this means my tracker is well optimized, because it's only a factor of 2 slower than serving static assets. However, when I benchmark with millions of hits, I notice a few things -- No disk usage -- this is expected, because I've turned off all Nginx logs, and my custom code doesn't do anything but save the request details into Redis. Non-constant memory usage -- Presumably due to Redis' memory managing, my memory usage will gradually climb up and then drop back down, but it's never once been my bottleneck. System load hovers around 2-4, the system is still responsive during even my heaviest benchmarks, and I can still manually view http://mysite.com/tracking/pixel with little visible delay while my (other) server performs 600 requests per second. If I run a short test, say 50,000 hits (takes about 2m), I get a steady, reliable 600 requests per second. If I run a longer test (tried up to 3.5m so far), my r/s degrades to about 250. My questions -- a. Does it look like I'm maxing out this server yet? Is 1,200/s static files nginx performance comparable to what others have experienced? b. Are there common nginx tunings for such high-volume applications? I have worker threads set to 64, and gunicorn worker threads set to 8, but tweaking these values doesn't seem to help or harm me much. c. Are there any linux-level settings that could be limiting my incoming connections? d. What could cause my performance to degrade to 250r/s on long-running tests? Again, the memory is not maxing out during these tests, and HDD use is nil. Thanks in advance, all :)

Read the article

Serving protected files using Nginx's X-Accel-Redirect header

- by andybak

I'm trying to serve protected files using this directive in my nginx.conf: location /secure/ { internal; alias /home/ldr/webapps/nginx/app/secure/; } I'm passing in paths in the form: "/myfile.doc" and the file's path would be: /home/ldr/webapps/nginx/app/secure/myfile.doc I just get 404's when I access "http: //myserver/secure/myfile.doc" (space inserted after http to stop ServerFault converting it to a link) I've tried taking the trailing / off the location directive and that makes no difference. Two questions: How do I fix it! How can I debug problems like this myself? How can I get Nginx to report which path it's looking for? error.log shows nothing and access.log just tells me which url is being requested - this is the bit I already know! It's no fun trying things randomly without any feedback. Here's my entire nginx.conf: daemon off; worker_processes 2; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; server { listen 21534; server_name my.server.com; client_max_body_size 5m; location /media/ { alias /home/ldr/webapps/nginx/app/media/; } location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; fastcgi_pass unix:/home/ldr/webapps/nginx/app/myproject/django.sock; fastcgi_pass_header Authorization; fastcgi_hide_header X-Accel-Redirect; fastcgi_hide_header X-Sendfile; fastcgi_intercept_errors off; include fastcgi_params; } location /secure { internal; alias /home/ldr/webapps/nginx/app/secure/; } } } EDIT: I'm trying some of the suggestions here So I've tried: location /secure/ { internal; alias /home/ldr/webapps/nginx/app/; } both with and without the trailing slash on location. I've also tried moving this block before the "location /" directive. The page I linked to has ^~ after 'location' giving: location ^~ /secure/ { ...etc... Not sure what that signifies but it didn't work either!

Read the article

SQLAuthority News – Guest Post – Performance Counters Gathering using Powershell

- by pinaldave

Laerte Junior Laerte Junior has previously helped me personally to resolve the issue with Powershell installation on my computer. He did awesome job to help. He has send this another wonderful article regarding performance counter for readers of this blog. I really liked it and I expect all of you who are Powershell geeks, you will like the same as well. As a good DBA, you know that our social life is restricted to a few movies over the year and, when possible, a pizza in a restaurant next to your company’s place, of course. So what we have to do is to create methods through which we can facilitate our daily processes to go home early, and eventually have a nice time with our family (and not sleeping on the couch). As a consultant or fixed employee, one of our daily tasks is to monitor performance counters using Perfmom. To be honest, IDE is getting more complicated. To deal with this, I thought a solution using Powershell. Yes, with some lines of Powershell, you can configure which counters to use. And with one more line, you can already start collecting data. Let’s see one scenario: You are a consultant who has several clients and has just closed another project in troubleshooting an SQL Server environment. You are to use Perfmom to collect data from the server and you already have its XML configuration files made with the counters that you will be using- a file for memory bottleneck f, one for CPU, etc. With one Powershell command line for each XML file, you start collecting. The output of such a TXT file collection is set to up in an SQL Server. With two lines of command for each XML, you make the whole process of data collection. Creating an XML configuration File to Memory Counters: Get-PerfCounterCategory -CategoryName "Memory" | Get-PerfCounterInstance | Get-PerfCounterCounters |Save-ConfigPerfCounter -PathConfigFile "c:\temp\ConfigfileMemory.xml" -newfile Creating an XML Configuration File to Buffer Manager, counters Page lookups/sec, Page reads/sec, Page writes/sec, Page life expectancy: Get-PerfCounterCategory -CategoryName "SQLServer:Buffer Manager" | Get-PerfCounterInstance | Get-PerfCounterCounters -CounterName "Page*" | Save-ConfigPerfCounter -PathConfigFile "c:\temp\BufferManager.xml" –NewFile Then you start the collection: Set-CollectPerfCounter -DateTimeStart "05/24/2010 08:00:00" -DateTimeEnd "05/24/2010 22:00:00" -Interval 10 -PathConfigFile c:\temp\ConfigfileMemory.xml -PathOutputFile c:\temp\ConfigfileMemory.txt To let the Buffer Manager collect, you need one more counters, including the Buffer cache hit ratio. Just add a new counter to BufferManager.xml, omitting the new file parameter Get-PerfCounterCategory -CategoryName "SQLServer:Buffer Manager" | Get-PerfCounterInstance | Get-PerfCounterCounters -CounterName "Buffer cache hit ratio" | Save-ConfigPerfCounter -PathConfigFile "c:\temp\BufferManager.xml" And start the collection: Set-CollectPerfCounter -DateTimeStart "05/24/2010 08:00:00" -DateTimeEnd "05/24/2010 22:00:00" -Interval 10 -PathConfigFile c:\temp\BufferManager.xml -PathOutputFile c:\temp\BufferManager.txt You do not know which counters are in the Category Buffer Manager? Simple! Get-PerfCounterCategory -CategoryName "SQLServer:Buffer Manager" | Get-PerfCounterInstance | Get-PerfCounterCounters Let’s see one output file as shown below. It is ready to bulk insert into the SQL Server. As you can see, Powershell makes this process incredibly easy and fast. Do you want to see more examples? Visit my blog at Shell Your Experience You can find more about Laerte Junior over here: www.laertejuniordba.spaces.live.com www.simple-talk.com/author/laerte-junior www.twitter.com/laertejuniordba SQL Server Powershell Extension Team: http://sqlpsx.codeplex.com/ Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: SQL, SQL Add-On, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology Tagged: Powershell

Read the article

Add the Recycle Bin to Start Menu in Windows 7

- by Matthew Guay

Have you ever tried to open the Recycle Bin by searching for “recycle bin” in the Start menu search, only to find nothing? Here’s a quick trick that will let you find the Recycle Bin directly from your Windows Start menu search. The Start menu search may be the best timesaver ever added to Windows. In fact, we use it so much that it seems painful to manually search for a program when using Windows XP or older versions of Windows. You can easily find files, folders, programs and more through the Start menu search in both Vista and Windows 7. However, one thing you cannot find is the recycle bin; if you enter this in the start menu search it will not find it. Here’s how to add the Recycle Bin to your Start menu search. What to do To access the Recycle Bin from the Start menu search, we need to add a shortcut to the start menu. Windows includes a personal Start menu folder, and an All Users start menu folder which all users on the computer can see. This trick only works in the personal Start menu folder. Open up an Explorer window (Simply click the Computer link in the start menu), click the white part of the address bar, and, enter the following (substitute your username for your_user_name) and hit Enter. C:\Users\your_user_name\AppData\Roaming\Microsoft\Windows\Start Menu Now, right-click in the folder, select New, and then click Shortcut. In the location box, enter the following: explorer.exe shell:RecycleBinFolder When you’ve done this, click Next. Now, enter a name for the shortcut. You can enter Recycle Bin like the standard shortcut, or you could name it something else such as Trash…if that’s easier for you to remember. Click Finish when your done. By default it will have a folder icon. Let’s switch that to the standard Recycle Bin icon. Right-click on the new shortcut and click Properties. Click Change Icon… Type the following in the “Look for icons in this file:” box, and press the Enter key on your keyboard: %SystemRoot%\system32\imageres.dll Now, scroll and find the Recycle Bin icon and click Ok. Click Ok in the previous dialog, and now your Recycle Bin shortcut has the correct icon. You can even have multiple shortcuts with different names, so when you searched either Recycle Bin or Trash it would come up in the Start menu. To do that, simply repeat these directions, and enter another name of your choice at the prompt. Here we have both a Recycle Bin and a Trash icon. Now, when you enter Recycle Bin (or trash, depending on what you chose) in your Start menu search, you will see it at the top of your Start menu. Simply press Enter or click on the icon to open the Recycle Bin. This trick will work in Windows Vista too! Simply follow these same directions, and you can add the Recycle Bin to your Vista Start menu and find it via search. This is a simple trick, but may make it much easier for you to open your Recycle Bin directly from your Windows Vista or 7 Start menu search. If you’re using Windows 7, you can also check out our directions on how to Add the Recycle Bin to the Taskbar in Windows 7. Similar Articles Productive Geek Tips Hide, Delete, or Destroy the Recycle Bin Icon in Windows 7 or VistaDisable Deletion of the Recycle Bin in Windows VistaHide the Recycle Bin Icon Text on Windows VistaAdd the Recycle Bin to the Taskbar in Windows 7Resize the Recycle Bin in XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader

Read the article

PowerShell Control over Nikon D3000 Camera

My wife got me a Nikon D3000 camera for Christmas last year, and Im loving it but still trying to wrap my head around some of its features. For instance, when you plug it into a computer via USB, it doesnt show up as a drive like most cameras Ive used to, but rather it shows up as Computer\D3000. After a bit of research, Ive learned that this is because it implements the MTP/PTP protocol, and thus doesnt actually let Windows mount the cameras storage as a drive letter. Nikon describes the use of the MTP and PTP protocols in their cameras here. What Im really trying to do is gain access to the cameras file system via PowerShell. Ive been using a very handy PowerShell script to pull pictures off of my cameras and organize them into folders by date. Id love to be able to do the same thing with my Nikon D3000, but so far I havent been able to figure out how to get access to the files in PowerShell. If you know, Id appreciate any links/tips you can provide. All I could find is a shareware product called PTPdrive, which Im not prepared to shell out money for (yet). (and yes you can do much the same thing with Windows 7s Import Pictures and Videos wizard, which is pretty good too) However, in my searching, I did find some really cool stuff you can do with PowerShell and one of these cameras, like actually taking pictures via PowerShell commands. Credit for this goes to James ONeill and Mark Wilson. Heres what I was able to do: Taking Pictures via PowerShell with D3000 First, connect your camera, turn it on, and launch PowerShell. Execute the following commands to see what commands your device supports. $dialog = New-Object -ComObject "WIA.CommonDialog" $device = $dialog.ShowSelectDevice() $device.Commands You should see something like this: Now, to take a picture, simply point your camera at something and then execute this command: $device.ExecuteCommand("{AF933CAC-ACAD-11D2-A093-00C04F72DC3C}") .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Imagine my surprise when this actually took a picture (with auto-focus): Imagine what you could do with a camera completely under the control of your computer Time-lapse photography would be pretty simple, for instance, with a very simple loop that takes a picture and then sleeps for a minute (or whatever time period). Hooked up to a laptop for portability (and an A/C power supply), this would be pretty trivial to implement. I may have to give it a shot and report back. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

This Week in Geek History: Gmail Goes Public, Deep Blue Wins at Chess, and the Birth of Thomas Edison

- by Jason Fitzpatrick

Every week we bring you a snapshot of the week in Geek History. This week we’re taking a peek at the public release of Gmail, the first time a computer won against a chess champion, and the birth of prolific inventor Thomas Edison. Gmail Goes Public It’s hard to believe that Gmail has only been around for seven years and that for the first three years of its life it was invite only. In 2007 Gmail dropped the invite only requirement (although they would hold onto the “beta” tag for another two years) and opened its doors for anyone to grab a username @gmail. For what seemed like an entire epoch in internet history Gmail had the slickest web-based email around with constant innovations and features rolling out from Gmail Labs. Only in the last year or so have major overhauls at competitors like Hotmail and Yahoo! Mail brought other services up to speed. Can’t stand reading a Week in Geek History entry without a random fact? Here you go: gmail.com was originally owned by the Garfield franchise and ran a service that delivered Garfield comics to your email inbox. No, we’re not kidding. Deep Blue Proves Itself a Chess Master Deep Blue was a super computer constructed by IBM with the sole purpose of winning chess matches. In 2011 with the all seeing eye of Google and the amazing computational abilities of engines like Wolfram Alpha we simply take powerful computers immersed in our daily lives for granted. The 1996 match against reigning world chest champion Garry Kasparov where in Deep Blue held its own, but ultimately lost, in a 4-2 match shook a lot of people up. What did it mean if something that was considered such an elegant and quintessentially human endeavor such as chess was so easy for a machine? A series of upgrades helped Deep Blue outright win a match against Kasparov in 1997 (seen in the photo above). After the win Deep Blue was retired and disassembled. Parts of Deep Blue are housed in the National Museum of History and the Computer History Museum. Birth of Thomas Edison Thomas Alva Edison was one of the most prolific inventors in history and holds an astounding 1,093 US Patents. He is responsible for outright inventing or greatly refining major innovations in the history of world culture including the phonograph, the movie camera, the carbon microphone used in nearly every telephone well into the 1980s, batteries for electric cars (a notion we’d take over a century to take seriously), voting machines, and of course his enormous contribution to electric distribution systems. Despite the role of scientist and inventor being largely unglamorous, Thomas Edison and his tumultuous relationship with fellow inventor Nikola Tesla have been fodder for everything from books, to comics, to movies, and video games. Other Notable Moments from This Week in Geek History Although we only shine the spotlight on three interesting facts a week in our Geek History column, that doesn’t mean we don’t have space to highlight a few more in passing. This week in Geek History: 1971 – Apollo 14 returns to Earth after third Lunar mission. 1974 – Birth of Robot Chicken creator Seth Green. 1986 – Death of Dune creator Frank Herbert. Goodnight Dune. 1997 – Simpsons becomes longest running animated show on television. Have an interesting bit of geek trivia to share? Shoot us an email to [email protected] with “history” in the subject line and we’ll be sure to add it to our list of trivia. Latest Features How-To Geek ETC Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? Clean Up Google Calendar’s Interface in Chrome and Iron The Rise and Fall of Kramerica? [Seinfeld Video] GNOME Shell 3 Live CDs for OpenSUSE and Fedora Available for Testing Picplz Offers Special FX, Sharing, and Backup of Your Smartphone Pics BUILD! An Epic LEGO Stop Motion Film [VIDEO] The Lingering Glow of Sunset over a Winter Landscape Wallpaper

Read the article

Stream Media from Windows 7 to XP with VLC Media Player

- by DigitalGeekery

So you’ve got yourself a new computer with Windows 7 and you’re itching to take advantage of it’s ability to stream media across your home network. But, the rest of the family is still on Windows XP and you’re not quite ready to shell out the cash for the upgrades. Well, today we’ll show you how to easily stream media from Windows 7 to Windows XP with VLC Media Player. On the host computer running Windows 7, you’ll need to have an account set up with both a username and password. A blank password will not work. The media files will need to be located in a shared folder. Note: If the media files are located within the Public directory, or within the profile of the user account you use to log into the Windows 7 computer, they will be shared automatically. Sharing your Media Folders On your Windows 7 computer, right-click on the folder containing the files you’d like to stream and choose Properties. On the Sharing Tab of the folder properties, click the Share button. Click OK. Type or select from the drop down the user account you’ll use to log in, or select “Everyone” to share with all users. Then click Add. You may change the permission level, but only Read permission is required to play the media. Repeat this process for any additional folders you wish to share. The Windows XP Client Computer Now that we’ve shared our media folders from the Windows 7 computer, we’re ready to play our files on the Windows XP computer. Download and install the VLC Media Player. (See link below) Then open VLC. Click on Media from the and select Open File… Browse your network for the shared folder that contains your media. You’ll be prompted to log in to the host computer. Provide the credentials for a user on the Windows 7 computer. Click OK. Select your media file and click Open. Your media playback will begin momentarily. This is a nice and easy way to stream media across your home network without upgrading multiple computers to Windows 7. Plus, VLC is certainly no slouch as a Media Player. It’ll play virtually any video or audio file you can throw at it. Have you already upgraded all your home PCs to Windows 7? Check out our previous article on streaming media between Windows 7 computers on your home network. Download VLC Media Player Similar Articles Productive Geek Tips Fixing When Windows Media Player Library Won’t Let You Add FilesShare Digital Media With Other Computers on a Home Network with Windows 7Enable Media Streaming in Windows Home Server to Windows Media PlayerInstall and Use the VLC Media Player on Ubuntu LinuxInstalling Windows Media Player Plugin for Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Need Help with Your Home Network? Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images

Read the article

Visual Studio 2010 Beta 2 Startup Failures

- by Rick Strahl

I’ve been working with VS 2010 Beta 2 for a while now and while it works Ok most of the time it seems the environment is very, very fragile when it comes to crashes and installed packages. Specifically I’ve been working just fine for days, then when VS 2010 crashes it will not re-start. Instead I get the good old Application cannot start dialog: Other failures I’ve seen bring forth other just as useful dialogs with information overload like Operation cannot be performed which for me specifically happens when trying to compile any project. After a bit of digging around and a post to Microsoft Connect the solution boils down to resetting the VS.NET environment. The Application Cannot Start issue stems from a package load failure of some sort, so the work around for this is typically: c:\program files\Visual Studio 2010\Common7\IDE\devenv.exe /ResetSkipPkgs In most cases that should do the trick. If it doesn’t and the error doesn’t go away the more drastic: c:\program files\Visual Studio 2010\Common7\IDE\devenv.exe /ResetSettings is required which resets all settings in VS to its installation defaults. Between these two I’ve always been able to get VS to startup and run properly. BTW it’s handy to keep a list of command line options for Visual Studio around: http://msdn.microsoft.com/en-us/library/xee0c8y7%28VS.100%29.aspx Note that the /? option in VS 2010 doesn’t display all the options available but rather displays the ‘demo version’ message instead, so the above should be helpful. Also note that unless you install Visual C++ the Visual Studio Command Prompt icon is not automatically installed so you may have to navigate manually to the appropriate folder above. Cannot Build Failures If you get the Cannot compile error dialog, there is another thing that have worked for me: Change your project build target from Debug to Release (or whatever – just change it) and compile again. If that doesn’t work doing the reset steps above will do it for me. It appears this failure comes from some sort of interference of other versions of Visual Studio installed on the system and running another version first. Resetting the build target explicitly seems to reset the build providers to a normalized state so that things work in many cases. But not all. Worst case – resetting settings will do it. The bottom line for working in VS 2010 has been – don’t get too attached to your custom settings as they will get blown away quite a bit. I’ve probably been through 20 or more of these VS resets although I’ve been working with it quite a bit on an internal project. It’s kind of frustrating to see this kind of high level instability in a Beta 2 product which is supposedly the last public beta they will put out. On the other hand this beta has been otherwise rather stable and performance is roughly equivalent to VS 2008. Although I mention the crash above – crashes I’ve seen have been relatively rare and no more frequent than in VS 2008 it seems. Given the drastic UI changes in VS 2010 (using WPF for the shell and editor) I’m actually impressed that the product is as stable as it is at this point. Also I was seriously worried about text quality going to a WPF model, but thankfully WPF 4.0 addresses the blurry text issue with native font rendering to render text on non-cleartype enabled systems crisply. Anyway I hope that these notes are helpful to some of you playing around with the beta and running into problems. Hopefully you won’t need them :-}© Rick Strahl, West Wind Technologies, 2005-2010

Read the article

Want a headless build server for SSDT without installing Visual Studio? You’re out of luck!

- by jamiet

An issue that regularly seems to rear its head on my travels is that of headless build servers for SSDT. What does that mean exactly? Let me give you my interpretation of it. A SQL Server Data Tools (SSDT) project incorporates a build process that will basically parse all of the files within the project and spit out a .dacpac file. Where an organisation employs a Continuous Integration process they will likely want to automate the building of that dacpac whenever someone commits a change to the source control repository. In order to do that the organisation will use a build server (e.g. TFS, TeamCity, Jenkins) and hence that build server requires all the pre-requisite software that understands how to build an SSDT project. The simplest way to install all of those pre-requisites is to install SSDT itself however a lot of folks don’t like that approach because it installs a lot unnecessary components on there, not least Visual Studio itself. Those folks (of which i am one) are of the opinion that it should be unnecessary to install a heavyweight GUI in order to simply get a few software components required to do something that inherently doesn’t even need a GUI. The phrase “headless build server” is often used to describe a build server that doesn’t contain any heavyweight GUI tools such as Visual Studio and is a desirable state for a build server. In his blog post Headless MSBuild Support for SSDT (*.sqlproj) Projects Gert Drapers outlines the steps necessary to obtain a headless build server for SSDT: This article describes how to install the required components to build and publish SQL Server Data Tools projects (*.sqlproj) using MSBuild without installing the full SQL Server Data Tool hosted inside the Visual Studio IDE. http://sqlproj.com/index.php/2012/03/headless-msbuild-support-for-ssdt-sqlproj-projects/ Frankly however going through these steps is a royal PITA and folks like myself have longed for Microsoft to support headless build support for SSDT by providing a distributable installer that installs only the pre-requisites for building SSDT projects. Yesterday in MSDN forum thread Building a VS2013 headless build server - it's sooo hard Mike Hingley complained about this very thing and it prompted a response from Kevin Cunnane from the SSDT product team: The official recommendation from the TFS / Visual Studio team is to install the version of Visual Studio you use on the build machine. I, like many others, would rather not have to install full blown Visual Studio and so I asked: Is there any chance you'll ever support any of these scenarios: Installation of all build/deploy pre-requisites without installing the VS shell? TFS shipping with all of the pre-requisites for doing SSDT project build/deploys 3rd party build servers (e.g. TeamCity) shipping with all of the requisites for doing SSDT project build/deploys I have to say that the lack of a single installer containing all the pre-requisites for SSDT build/deploy puzzles me. Surely the DacFX installer would be a perfect vehicle for that? Kevin replied again: The answer is no for all 3 scenarios. We looked into this issue, discussed it with the Visual Studio / TFS team, and in the end agreed to go with their latest guidance which is to install Visual Studio (e.g. VS2013 Express for Web) on the build machine. This is how Visual Studio Online is doing it and it's the approach recommended for customers setting up their own TFS build servers. I would hope this is compatible with 3rd party build servers but have not verified whether this works with TeamCity etc. Note that DacFx MSI isn't a suitable release vehicle for this as we don't want to include Visual Studio/MSBuild dependencies in that package. It's meant to just include the core DacFx DLLs used by SSMS, SqlPackage.exe on the command line, etc. What this means is we won't be providing a separate MSI installer or nuget package with just the necessary build DLLs you need to run your build and tests. If someone wanted to create a script that generated a nuget package based on our DLLs and targets files, then release that somewhere on the web for easier integration with 3rd party build servers we've no problem with that. Again, here’s the link to the thread and its worth reading in its entirety if this is something that interests you. So there you have it. Microsoft will not be be providing support for headless build servers for SSDT but if someone in the community wants to go ahead and roll their own, go right ahead. @Jamiet

Read the article

MongoDB usage best practices

- by andresv

The project I'm working on uses MongoDB for some stuff so I'm creating some documents to help developers speedup the learning curve and also avoid mistakes and help them write clean & reliable code. This is my first version of it, so I'm pretty sure I will be adding more stuff to it, so stay tuned! C# Official driver notes The 10gen official MongoDB driver should always be referenced in projects by using NUGET. Do not manually download and reference assemblies in any project. C# driver quickstart guide: http://www.mongodb.org/display/DOCS/CSharp+Driver+Quickstart Reference links C# Language Center: http://www.mongodb.org/display/DOCS/CSharp+Language+Center MongoDB Server Documentation: http://www.mongodb.org/display/DOCS/Home MongoDB Server Downloads: http://www.mongodb.org/downloads MongoDB client drivers download: http://www.mongodb.org/display/DOCS/Drivers MongoDB Community content: http://www.mongodb.org/display/DOCS/CSharp+Community+Projects Tutorials Tutorial MongoDB con ASP.NET MVC - Ejemplo Práctico (Spanish):http://geeks.ms/blogs/gperez/archive/2011/12/02/tutorial-mongodb-con-asp-net-mvc-ejemplo-pr-225-ctico.aspx MongoDB and C#:http://www.codeproject.com/Articles/87757/MongoDB-and-C C# driver LINQ tutorial:http://www.mongodb.org/display/DOCS/CSharp+Driver+LINQ+Tutorial C# driver reference: http://www.mongodb.org/display/DOCS/CSharp+Driver+Tutorial Safe Mode Connection The C# driver supports two connection modes: safe and unsafe. Safe connection mode (only applies to methods that modify data in a database like Inserts, Deletes and Updates. While the current driver defaults to unsafe mode (safeMode == false) it's recommended to always enable safe mode, and force unsafe mode on specific things we know aren't critical. When safe mode is enabled, the driver internal code calls the MongoDB "getLastError" function to ensure the last operation is completed before returning control the the caller. For more information on using safe mode and their implicancies on performance and data reliability see: http://www.mongodb.org/display/DOCS/getLastError+Command If safe mode is not enabled, all data modification calls to the database are executed asynchronously (fire & forget) without waiting for the result of the operation. This mode could be useful for creating / updating non-critical data like performance counters, usage logging and so on. It's important to know that not using safe mode implies that data loss can occur without any notification to the caller. As with any wait operation, enabling safe mode also implies dealing with timeouts. For more information about C# driver safe mode configuration see: http://www.mongodb.org/display/DOCS/CSharp+getLastError+and+SafeMode The safe mode configuration can be specified at different levels: Connection string: mongodb://hostname/?safe=true Database: when obtaining a database instance using the server.GetDatabase(name, safeMode) method Collection: when obtaining a collection instance using the database.GetCollection(name, safeMode) method Operation: for example, when executing the collection.Insert(document, safeMode) method Some useful SafeMode article: http://stackoverflow.com/questions/4604868/mongodb-c-sharp-safemode-official-driver Exception Handling The driver ensures that an exception will be thrown in case of something going wrong, in case of using safe mode (as said above, when not using safe mode no exception will be thrown no matter what the outcome of the operation is). As explained here https://groups.google.com/forum/?fromgroups#!topic/mongodb-user/mS6jIq5FUiM there is no need to check for any returned value from a driver method inserting data. With updates the situation is similar to any other relational database: if an update command doesn't affect any records, the call will suceed anyway (no exception thrown) and you manually have to check for something like "records affected". For MongoDB, an Update operation will return an instance of the "SafeModeResult" class, and you can verify the "DocumentsAffected" property to ensure the intended document was indeed updated. Note: Please remember that an Update method might return a null instance instead of an "SafeModeResult" instance when safe mode is not enabled. Useful Community Articles Comments about how MongoDB works and how that might affect your application: http://ethangunderson.com/blog/two-reasons-to-not-use-mongodb/ FourSquare using MongoDB had serious scalability problems: http://mashable.com/2010/10/07/mongodb-foursquare/ Is MongoDB a replacement for Memcached? http://www.quora.com/Is-MongoDB-a-good-replacement-for-Memcached/answer/Rick-Branson MongoDB Introduction, shell, when not to use, maintenance, upgrade, backups, memory, sharding, etc: http://www.markus-gattol.name/ws/mongodb.html MongoDB Collection level locking support: https://jira.mongodb.org/browse/SERVER-1240 MongoDB performance tips: http://www.quora.com/MongoDB/What-are-some-best-practices-for-optimal-performance-of-MongoDB-particularly-for-queries-that-involve-multiple-documents Lessons learned migrating from SQL Server to MongoDB: http://www.wireclub.com/development/TqnkQwQ8CxUYTVT90/read MongoDB replication performance: http://benshepheard.blogspot.com.ar/2011/01/mongodb-replication-performance.html

Read the article

A Few of My Favorite HTML5 and CSS3 Online Tools

- by dwahlin

I really enjoy coding up HTML5, CSS3, and JavaScript applications but there are some things that I’m better off writing with the help of a development tool. For example, CSS3 gradients aren’t exactly the most fun thing to write by hand and the same could be said for animations, transforms, or styles that require various vendor extensions. There are a lot of online tools that can simplify building HTML5/CSS3 sites and increase productivity in the process so I thought I’d put together a post on a few of my favorites tools. HTML5 Boilerplate HTML5 Boilerplate provides a great way to get started building HTML5 sites. It includes many best practices out of the box and even includes a few tricks that many people don’t even know about. The custom download option allows you to pick the features that you want to include in the files that’s generated. You can read more about it here. Initializr Although HTML5 Boilerplate provides a great foundation for starting HTML5 sites, it focuses on providing a starting shell structure (namely an html page, JavaScript files, and a CSS stylesheet) and doesn’t include much in the way of page content to get started with. Initializer builds on HTML5 Boilerplate and provides an initial test page that can be tweaked to meet your needs. It also provides several different customization options to include/exclude features. CSS3 Maker CSS3 provides a lot of great features ranging from gradient support to rounded corners. Although many of the features are fairly straightforward there are some that are pretty involved such as gradients, animations, and really any styles that require custom vendor extensions to use across browsers. Sure, you can type everything by hand, but sites such as CSS3 Maker provide a visual way to generate CSS3 styles. CSS3, Please! CSS3, Please! is a code generation tool that can be used to generate cross-browser CSS3 styles quickly and easily. All of the main things you can do with CSS3 are available including a clever way to visually generate CSS3 transform styles. Ultimate CSS Gradient Generator CSS3 Maker (above) has a gradient generator built-in but my favorite tool for creating CSS3 gradients is the Ultimate CSS Gradient Generator. If you’ve created gradients in tools like Photoshop then you’ll love what this tool has to offer especially since it makes it extremely straightforward to work with different gradient stops. @font-face Fonts Although @font-face has been available for awhile, I think fonts are cool and wanted to mention a site that provides a lot of font choices. When used correctly fonts can really enhance a page and when used incorrectly (think Comic Sans) they can absolutely ruin a page. Several sites exist that provide fonts that can be used with @font-face definitions in CSS style sheets. One of my favorites is Font Squirrel. HTML5 & CSS3 Support and Tests Interested in knowing what HTML5 and CSS3 features a given browser supports? Want to know how various browsers stack up with each other as far as HTML5/CSS3 support. Look no further than the HTML5 & CSS3 Support page or the HTML5 Test page. CSS3 Easing Animation Tool CSS3 animations aren’t widely supported across browsers right now (I’m not really using them at this point) but they do offer a lot of promise. Creating easings for animations can definitely be a challenge but they’re something that are critical for adding that “professional touch” to your animations. Fortunately you can use the Ceaser CSS Easing Animation Tool to simplify the process and handle animation easing with…...ease. There are several other online tools that I like but these are some of the ones I find myself using the most. If you have any favorite online tools that simplify working with HTML5 or CSS3 let me know. For more information about onsite or online training, mentoring and consulting solutions for HTML5, jQuery, .NET, SharePoint or Silverlight please visit http://www.thewahlingroup.com.

Read the article

Setting up SharePoint without Active Directory

- by eJugnoo

In order to setup SharePoint without AD, you need to run following PowerShell command on Management Shell after installing SharePoint on your server, but before running Config Wizard: (we don’t want to run this SP farm in stand-alone mode!) 1. New-SPConfigurationDatabase SYNOPSIS Creates a new configuration database. SYNTAX New-SPConfigurationDatabase [-DatabaseName] <String> [-DatabaseServer] <String> [[-DirectoryDomain] <String>] [[-DirectoryOrganizationUnit] <String>] [[-AdministrationContentDatabaseName] <String>] [[-DatabaseCredentials] <PSCredential>] [-FarmCredentials] <PSCredential> [-Passphrase] <SecureString> [-AssignmentCollection <SPAssignmentCollection>] [<CommonParameters>] DESCRIPTION The New-SPConfigurationDatabase cmdlet creates a new configuration database on the specified database server. This is the central database for a new SharePoint farm. For permissions and the most current information about Windows PowerShell for SharePoint Products, see the online documentation (http://go.microsoft.com/fwlink/?LinkId=163185). RELATED LINKS Backup-SPConfigurationDatabase Disconnect-SPConfigurationDatabase Connect-SPConfigurationDatabase Remove-SPConfigurationDatabase REMARKS To see the examples, type: "get-help New-SPConfigurationDatabase -examples". For more information, type: "get-help New-SPConfigurationDatabase -detailed". For technical information, type: "get-help New-SPConfigurationDatabase -full". NOTE: Use –AdministrationContentDatabaseName switch to pass the name of Admin database you want instead of GUID-based name it automatically creates. Hence, one can pretty much easily control Admin, Config, and Content database names at the time of farm creation. If creating new farm, you can also delete and re-provision any service databases automatically created, from UI, to decide what database names you want. 2. Run SharePoint Configuration Wizard, and you’ll following as already added to farm. Select do not discconect from farm, and proceed… Select the port, and authentication (NTLM in my case). Click next, and wizard will complete the remaining steps of provisioning, including creation of Central Admin Web App on the desired port. Once successful, it will open the Central Admin site and ask you to run Farm Config Wizard. I chose to skip and do things manually, to remain in control of what is happening on the farm. Like creating web-app for site collections, creating the very first site collection, and any other service applications. I needed this to create a public-facing installation of SharePoint Foundation RTM on a server which didn’t have AD. Now I am going to setup FBA, and possibly Live ID Auth as well. I will be also setting up RBS, and multi-tenancy on this farm ,and would post any notes, and findings here… --Sharad

Read the article

Opening the Internet Settings Dialog and using Windows Default Network Settings via Code

- by Rick Strahl

Ran into a question from a client the other day that asked how to deal with Internet Connection settings for running HTTP requests. In this case this is an old FoxPro app and it's using WinInet to handle the actual HTTP connection. Another client asked a similar question about using the IE Web Browser control and configuring connection properties. Regardless of platform or tools used to do HTTP connections, you can probably configure custom connection and proxy settings in your application to configure http connection settings manually. However, this is a repetitive process for each application requires you to track system information in your application which is undesirable. Often it's much easier to rely on the system wide proxy settings that Windows provides via the Internet Settings dialog. The dialog is a Control Panel applet (inetcpl.cpl) and is the same dialog that you see when you pop up Internet Explorer's Options dialog: This dialog controls the Windows connection properties that determine how the Windows HTTP stack connects to the Internet and how Proxy's are used if configured. Depending on how the HTTP client is configured - it can typically inherit and use these global settings. Loading the Settings Dialog Programmatically The settings dialog is a Control Panel applet with the name of: inetcpl.cpl and you can use any Shell execution mechanism (Run dialog, ShellExecute API, Process.Start() in .NET etc.) to invoke the dialog. Changes made there are immediately reflected in any applications that use the default connection settings. In .NET you can simply do this to bring up the Internet Settings dialog with the Connection tab enabled: Process.Start("inetcpl.cpl",",4"); In FoxPro you can simply use the RUN command to execute inetcpl.cpl: lcCmd = "inetcpl.cpl ,4" RUN &lcCmd Using the Default Connection/Proxy Settings When using WinInet you specify the Http connect type in the call to InternetOpen() like this (FoxPro code here): hInetConnection=; InternetOpen(THIS.cUserAgent,0,; THIS.chttpproxyname,THIS.chttpproxybypass,0) The second parameter of 0 specifies that the default system proxy settings should be used and it uses the settings from the Internet Settings Connections tab. Other connection options for HTTP connections include 1 - direct (no proxies and ignore system settings), 3 - explicit Proxy specification. In most situations a connection mode setting of 0 should work. In .NET HTTP connections by default are direct connections and so you need to explicitly specify a default proxy or proxy configuration to use. The easiest way to do this is on the application level in the config file: <configuration> <system.net> <defaultProxy> <proxy bypassonlocal="False" autoDetect="True" usesystemdefault="True" /> </defaultProxy> </system.net> </configuration> You can do the same sort of thing in code specifying the proxy explicitly and using System.Net.WebProxy.GetDefaultProxy(). So when making HTTP calls to Web Services or using the HttpWebRequest class you can set the proxy with: StoreService.Proxy = WebProxy.GetDefaultProxy(); All of this is pretty easy to deal with and in my opinion is a way better choice to managing connection settings than having to track this stuff in your own application. Plus if you use default settings, most of the time it's highly likely that the connection settings are already properly configured making further configuration rare.© Rick Strahl, West Wind Technologies, 2005-2011Posted in Windows HTTP .NET FoxPro Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

career in Mobile sw/Application Development [closed]

- by pramod

i m planning to do a course on Wireless & mobile computing.The syllabus are given below.Please check & let me know whether its worth to do.How is the job prospects after that.I m a fresher & from electronic Engg.The modules are- *Wireless and Mobile Computing (WiMC) – Modules* C, C++ Programming and Data Structures 100 Hours C Revision C, C++ programming tools on linux(Vi editor, gdb etc.) OOP concepts Programming constructs Functions Access Specifiers Classes and Objects Overloading Inheritance Polymorphism Templates Data Structures in C++ Arrays, stacks, Queues, Linked Lists( Singly, Doubly, Circular) Trees, Threaded trees, AVL Trees Graphs, Sorting (bubble, Quick, Heap , Merge) System Development Methodology 18 Hours Software life cycle and various life cycle models Project Management Software: A Process Various Phases in s/w Development Risk Analysis and Management Software Quality Assurance Introduction to Coding Standards Software Project Management Testing Strategies and Tactics Project Management and Introduction to Risk Management Java Programming 110 Hours Data Types, Operators and Language Constructs Classes and Objects, Inner Classes and Inheritance Inheritance Interface and Package Exceptions Threads Java.lang Java.util Java.awt Java.io Java.applet Java.swing XML, XSL, DTD Java n/w programming Introduction to servlet Mobile and Wireless Technologies 30 Hours Basics of Wireless Technologies Cellular Communication: Single cell systems, multi-cell systems, frequency reuse, analog cellular systems, digital cellular systems GSM standard: Mobile Station, BTS, BSC, MSC, SMS sever, call processing and protocols CDMA standard: spread spectrum technologies, 2.5G and 3G Systems: HSCSD, GPRS, W-CDMA/UMTS,3GPP and international roaming, Multimedia services CDMA based cellular mobile communication systems Wireless Personal Area Networks: Bluetooth, IEEE 802.11a/b/g standards Mobile Handset Device Interfacing: Data Cables, IrDA, Bluetooth, Touch- Screen Interfacing Wireless Security, Telemetry Java Wireless Programming and Applications Development(J2ME) 100 Hours J2ME Architecture The CLDC and the KVM Tools and Development Process Classification of CLDC Target Devices CLDC Collections API CLDC Streams Model MIDlets MIDlet Lifecycle MIDP Programming MIDP Event Architecture High-Level Event Handling Low-Level Event Handling The CLDC Streams Model The CLDC Networking Package The MIDP Implementation Introduction to WAP, WML Script and XHTML Introduction to Multimedia Messaging Services (MMS) Symbian Programming 60 Hours Symbian OS basics Symbian OS services Symbian OS organization GUI approaches ROM building Debugging Hardware abstraction Base porting Symbian OS reference design porting File systems Overview of Symbian OS Development – DevKits, CustKits and SDKs CodeWarrior Tool Application & UI Development Client Server Framework ECOM STDLIB in Symbian iPhone Programming 80 Hours Introducing iPhone core specifications Understanding iPhone input and output Designing web pages for the iPhone Capturing iPhone events Introducing the webkit CSS transforms transitions and animations Using iUI for web apps Using Canvas for web apps Building web apps with Dashcode Writing Dashcode programs Debugging iPhone web pages SDK programming for web developers An introduction to object-oriented programming Introducing the iPhone OS Using Xcode and Interface builder Programming with the SDK Toolkit OS Concepts & Linux Programming 60 Hours Operating System Concepts What is an OS? Processes Scheduling & Synchronization Memory management Virtual Memory and Paging Linux Architecture Programming in Linux Linux Shell Programming Writing Device Drivers Configuring and Building GNU Cross-tool chain Configuring and Compiling Linux Virtual File System Porting Linux on Target Hardware WinCE.NET and Database Technology 80 Hours Execution Process in .NET Environment Language Interoperability Assemblies Need of C# Operators Namespaces & Assemblies Arrays Preprocessors Delegates and Events Boxing and Unboxing Regular Expression Collections Multithreading Programming Memory Management Exceptions Handling Win Forms Working with database ASP .NET Server Controls and client-side scripts ASP .NET Web Server Controls Validation Controls Principles of database management Need of RDBMS etc Client/Server Computing RDBMS Technologies Codd’s Rules Data Models Normalization Techniques ER Diagrams Data Flow Diagrams Database recovery & backup SQL Android Application 80 Hours Introduction of android Why develop for android Android SDK features Creating android activities Fundamental android UI design Intents, adapters, dialogs Android Technique for saving data Data base in Androids Maps, Geocoding, Location based services Toast, using alarms, Instant messaging Using blue tooth Using Telephony Introducing sensor manager Managing network and wi-fi connection Advanced androids development Linux kernel security Implement AIDL Interface. Project 120 Hours

Read the article

jtreg update, March 2012

- by jjg

There is a new update for jtreg 4.1, b04, available. The primary changes have been to support faster and more reliable test runs, especially for tests in the jdk/ repository. [ For users inside Oracle, there is preliminary direct support for gathering code coverage data using jcov while running tests, and for generating a coverage report when all the tests have been run. ] -- jtreg can be downloaded from the OpenJDK jtreg page: http://openjdk.java.net/jtreg/. Scratch directories On platforms like Windows, if a test leaves a file open when the test is over, that can cause a problem for downstream tests, because the scratch directory cannot be emptied beforehand. This is addressed in agentvm mode by discarding any agents using that scratch directory and starting new agents using a new empty scratch directory. Successive directives use suffices _1, _2, etc. If you see such directories appearing in the work directory, that is an indication that files were left open in the preceding directory in the series. Locking support Some tests use shared system resources such as fixed port numbers. This causes a problem when running tests concurrently. So, you can now mark a directory such that all the tests within all such directories will be run sequentially, even if you use -concurrency:N on the command line to run the rest of the tests in parallel. This is seen as a short term solution: it is recommended that tests not use shared system resources whenever possible. If you are running multiple instances of jtreg on the same machine at the same time, you can use a new option -lock:file to specify a file to be used for file locking; otherwise, the locking will just be within the JVM used to run jtreg. "autovm mode" By default, if no options to the contrary are given on the command line, tests will be run in othervm mode. Now, a test suite can be marked so that the default execution mode is "agentvm" mode. In conjunction with this, you can now mark a directory such that all the tests within that directory will be run in "othervm" mode. Conceptually, this is equivalent to putting /othervm on every appropriate action on every test in that directory and any subdirectories. This is seen as a short term solution: it is recommended tests be adapted to use agentvm mode, or use "@run main/othervm" explicitly. Info in test result files The user name and jtreg version info are now stored in the properties near the beginning of the .jtr file. Build The makefiles used to build and test jtreg have been reorganized and simplified. jtreg is now using JT Harness version 4.4. Other jtreg provides access to GNOME_DESKTOP_SESSION_ID when set. jtreg ensures that shell tests are given an absolute path for the JDK under test. jtreg now honors the "first sentence rule" for the description given by @summary. jtreg saves the default locale before executing a test in samevm or agentvm mode, and restores it afterwards. Bug fixes jtreg tried to execute a test even if the compilation failed in agentvm mode because of a JVM crash. jtreg did not correctly handle the -compilejdk option. Acknowledgements Thanks to Alan, Amy, Andrey, Brad, Christine, Dima, Max, Mike, Sherman, Steve and others for their help, suggestions, bug reports and for testing this latest version.

Read the article

How to inhibit suspend temporarily?

- by Zorn

I have searched around a bit for this and can't seem to find anything helpful. I have my PC running Ubuntu 12.10 set up to suspend after 30 minutes of inactivity. I don't want to change that, it works great most of the time. What I do want to do is disable the automatic suspend if a particular application is running. How can I do this? The closest thing I've found so far is to add a shell script in /usr/lib/pm-utils/sleep.d which checks if the application is running and returns 1 to indicate that suspend should be prevented. But it looks like the system then gives up on suspending automatically, instead of trying again after another 30 minutes. (As far as I can tell, if I move the mouse, that restarts the timer again.) It's quite likely the application will finish after a couple of hours, and I'd rather my PC then suspended automatically if I'm not using it at that point. (So I don't want to add a call to pm-suspend when the application finishes.) Is this possible? Any advice would be appreciated. Cheers. EDIT: As I noted in one of the comments below, what I actually wanted was to inhibit suspend when my PC was serving files over NFS; I just wanted to focus on the "suspend" part of the question because I already had an idea how to solve the NFS part. Using the 'xdotool' idea given in one of the answers, I have come up with the following script which I run from cron every few minutes. It's not ideal because it stops the screensaver kicking in as well, but it does work. I need to have a look at why 'caffeine' doesn't correctly re-enable suspend later on, then I could probably do better. Anyway, this does seem to work, so I'm including it here in case anyone else is interested. #!/bin/bash # If the output of this function changes between two successive runs of this # script, we inhibit auto-suspend. function check_activity() { /usr/sbin/nfsstat --server --list } # Prevent the automatic suspend from kicking in. function inhibit_suspend() { # Slightly jiggle the mouse pointer about; we do a small step and # reverse step to try to stop this being annoying to anyone using the # PC. TODO: This isn't ideal, apart from being a bit hacky it stops # the screensaver kicking in as well, when all we want is to stop # the PC suspending. Can 'caffeine' help? export DISPLAY=:0.0 xdotool mousemove_relative --sync -- 1 1 xdotool mousemove_relative --sync -- -1 -1 } LOG="$HOME/log/nfs-suspend-blocker.log" ACTIVITYFILE1="$HOME/tmp/nfs-suspend-blocker.current" ACTIVITYFILE2="$HOME/tmp/nfs-suspend-blocker.previous" echo "Started run at $(date)" >> "$LOG" if [ ! -f "$ACTIVITYFILE1" ]; then check_activity > "$ACTIVITYFILE1" exit 0; fi /bin/mv "$ACTIVITYFILE1" "$ACTIVITYFILE2" check_activity > "$ACTIVITYFILE1" if cmp --quiet "$ACTIVITYFILE1" "$ACTIVITYFILE2"; then echo "No activity detected since last run" >> "$LOG" else echo "Activity detected since last run; inhibiting suspend" >> "$LOG" inhibit_suspend fi

Read the article

Building a Data Mart with Pentaho Data Integration Video Review by Diethard Steiner, Packt Publishing

- by Compudicted

Originally posted on: http://geekswithblogs.net/Compudicted/archive/2014/06/01/building-a-data-mart-with-pentaho-data-integration-video-review-again.aspx The Building a Data Mart with Pentaho Data Integration Video by Diethard Steiner from Packt Publishing is more than just a course on how to use Pentaho Data Integration, it also implements and uses the principals of the Data Warehousing (and I even heard the name of Ralph Kimball in the video). Indeed, a video watcher should be familiar with its concepts as the Star Schema, Slowly Changing Dimension types, etc. so I suggest prior to watching this course to consider skimming through the Data Warehouse concepts (if unfamiliar) or even better, read the excellent Ralph’s The Data Warehouse Tooolkit. By the way, the author expands beyond using Pentaho along to MySQL and MonetDB which is a real icing on the cake! Indeed, I even suggest the name of the course should be ‘Building a Data Warehouse with Pentaho’. To successfully complete the course one needs to know some Linux (Ubuntu used in the course), the VI editor and the Bash command shell, but it seems that similar requirements would also apply to the Windows OS. Additionally, knowing some basic SQL would not hurt. As I had said, MonetDB is used in this course several times which seems to be not anymore complex than say MySQL, but based on what I read is very well suited for fast querying big volumes of data thanks to having a columnstore (vertical data storage). I don’t see what else can be a barrier, the material is very digestible. On this note, I must add that the author does not cover how to acquire the software, so here is what I found may help: Pentaho: the free Community Edition must be more than anyone needs to learn it. Or even go into a POC. MonetDB can be downloaded (exists for both, Linux and Windows) from http://goo.gl/FYxMy0 (just see the appropriate link on the left). The author seems to be using Eclipse to run SQL code, one can get it from http://goo.gl/5CcuN. To create, or edit database entities and/or schema otherwise one can use a universal tool called SQuirreL, get it from http://squirrel-sql.sourceforge.net. Next, I must confess Diethard is very knowledgeable in what he does and beyond. However, there will be some accent heard to the user of the course especially if one’s mother tongue language is English, but it I got over it in a few chapters. I liked the rate at which the material is being presented, it makes me feel I paid for every second Eventually, my impressions are: Pentaho is an awesome ETL offering, it is worth learning it very much (I am an ETL fan and a heavy user of SSIS) MonetDB is nice, it tickles my fancy to know it more Data Warehousing, despite all the BigData tool offerings (Hive, Scoop, Pig on Hadoop), using the traditional tools still rocks Chapters 2 to 6 were the most fun to me with chapter 8 being the most difficult. In terms of closing, I highly recommend this video to anyone who needs to grasp Pentaho concepts quick, likewise, the course is very well suited for any developer on a “supposed to be done yesterday” type of a project. It is for a beginner to intermediate level ETL/DW developer. But one would need to learn more on Data Warehousing and Pentaho, for such I recommend the 5 star Pentaho Data Integration 4 Cookbook. Enjoy it! Disclaimer: I received this video from the publisher for the purpose of a public review.

Read the article

Building a Data Mart with Pentaho Data Integration Video Review by Diethard Steiner, Packt Publishing

- by Compudicted

Originally posted on: http://geekswithblogs.net/Compudicted/archive/2014/06/01/building-a-data-mart-with-pentaho-data-integration-video-review.aspx The Building a Data Mart with Pentaho Data Integration Video by Diethard Steiner from Packt Publishing is more than just a course on how to use Pentaho Data Integration, it also implements and uses the principals of the Data Warehousing (and I even heard the name of Ralph Kimball in the video). Indeed, a video watcher should be familiar with its concepts as the Star Schema, Slowly Changing Dimension types, etc. so I suggest prior to watching this course to consider skimming through the Data Warehouse concepts (if unfamiliar) or even better, read the excellent Ralph’s The Data Warehouse Tooolkit. By the way, the author expands beyond using Pentaho along to MySQL and MonetDB which is a real icing on the cake! Indeed, I even suggest the name of the course should be ‘Building a Data Warehouse with Pentaho’. To successfully complete the course one needs to know some Linux (Ubuntu used in the course), the VI editor and the Bash command shell, but it seems that similar requirements would also apply to the Weindows OS. Additionally, knowing some basic SQL would not hurt. As I had said, MonetDB is used in this course several times which seems to be not anymore complex than say MySQL, but based on what I read is very well suited for fast querying big volumes of data thanks to having a columnstore (vertical data storage). I don’t see what else can be a barrier, the material is very digestible. On this note, I must add that the author does not cover how to acquire the software, so here is what I found may help: Pentaho: the free Community Edition must be more than anyone needs to learn it. Or even go into a POC. MonetDB can be downloaded (exists for both, Linux and Windows) from http://goo.gl/FYxMy0 (just see the appropriate link on the left). The author seems to be using Eclipse to run SQL code, one can get it from http://goo.gl/5CcuN. To create, or edit database entities and/or schema otherwise one can use a universal tool called SQuirreL, get it from http://squirrel-sql.sourceforge.net. Next, I must confess Diethard is very knowledgeable in what he does and beyond. However, there will be some accent heard to the user of the course especially if one’s mother tongue language is English, but it I got over it in a few chapters. I liked the rate at which the material is being presented, it makes me feel I paid for every second Eventually, my impressions are: Pentaho is an awesome ETL offering, it is worth learning it very much (I am an ETL fan and a heavy user of SSIS) MonetDB is nice, it tickles my fancy to know it more Data Warehousing, despite all the BigData tool offerings (Hive, Scoop, Pig on Hadoop), using the traditional tools still rocks Chapters 2 to 6 were the most fun to me with chapter 8 being the most difficult. In terms of closing, I highly recommend this video to anyone who needs to grasp Pentaho concepts quick, likewise, the course is very well suited for any developer on a “supposed to be done yesterday” type of a project. It is for a beginner to intermediate level ETL/DW developer. But one would need to learn more on Data Warehousing and Pentaho, for such I recommend the 5 star Pentaho Data Integration 4 Cookbook. Enjoy it! Disclaimer: I received this video from the publisher for the purpose of a public review.

Read the article

News you can use, PeopleTools gems at OpenWorld 2012

- by PeopleTools Strategy

Here are some of the sessions which may not have caught your eyes during your scheduling of events you would like to attend at this year's Open World! CON9183 PeopleSoft Technology Roadmap Jeff Robbins Mon, Oct 1 4:45 PM Moscone West, Room 3002/4 Jeff's session is always very well attended. Come to hear, and see, what's going to be delivered in the new release and get some thoughts on where PeopleTools and the industry is heading. CON9186 Delivering a Ground-Breaking User Interface with PeopleTools Matt Haavisto Steve Elcock Wed, Oct 3 3:30 PM Moscone West, Room 3009 This session will be wonderfully engaging for participants. As part of our demonstration, audience members will be able to interact live and real-time with our demo using their smart phones and tablets as if you are users of the system. CON9188 A Great User Experience via PeopleSoft Applications Portal Matt Haavisto Jim Marion Pramod Agrawal Mon, Oct 1 12:15 PM Moscone West, Room 3009 This session covers not only the PeopleSoft Portal, but new features like Workcenters and Dashboards, and how they all work together to form the PeopleSoft ecosystem. CON9192 Implementing a PeopleSoft Maintenance Strategy with My Update Manager Mike Thompson Mike Krajicek Tue, Oct 2 1:15 PM Moscone West, Room 3009 The LCM development team will show Oracle's My Update Manager for PeopleSoft and how it drastically simplifies deciding what updates are required for your specific environment. CON9193 Understanding PeopleSoft Maintenance Tools & How They Fit Together Mike Krajicek Wed, Oct 3 10:15 AM Moscone West, Room 3002/4 Learn about the portfolio of maintenance tools including some of the latest enhancements such as Oracle's My Update Manager for PeopleSoft, Application Data Sets, and the PeopleSoft Test Framework, and see what they can do for you. CON9200 PeopleTools Product Team Panel Discussion Jeff Robbins Willie Suh Virad Gupta Ravi Shankar Mike Krajicek Wed, Oct 3 5:00 PM Moscone West, Room 3009 Attend this session to engage in an open discussion with key members of Oracle's PeopleTools senior management team. You will be able to ask questions, hear their thoughts, and gain their insight into the PeopleTools product direction. CON9205 Securing Your PeopleSoft Integration Infrastructure Greg Kelly Keith Collins Tue, Oct 2 10:15 AM Moscone West, Room 3011 This session, with the senior integration developer, will outline Oracle's best practices for securing your integration infrastructure so that you know your web services and REST services are as secure as the rest of your PeopleSoft environment. CON9210 Performance Tuning for the PeopleSoft Administrator Tim Bower David Kurtz Mon, Oct 1 10:45 AM Moscone West, Room 3009 Meet long time technical consultants with deep knowledge of system tuning, Tim Bower of the Center of Excellence and David Kurtz, author of "PeopleSoft for the Oracle DBA". System administrators new to tuning a PeopleSoft environment as well as seasoned experts will come away with new techniques that will help them improve the performance of their PeopleSoft system. CON9055 Advanced Management of Oracle PeopleSoft with Oracle Enterprise Manager Greg Kelly Milten Garia Greg Bouras Thurs Oct 4 12:45 PM Moscone West, Room 3009 This promises to be a really interesting session as Milten Garia from CSU discusses lessons learned during the implementation of Oracle's Enterprise Manager with the PeopleSoft plug-in across a multi campus environment. There are some surprising things about Solaris 10 and the Bourne shell. Some creative work by the Unix administrators so the well tried scripts and system replication processes were largely unaffected. CON8932 New Functional PeopleTools Capabilities for the Line of Business User Jeff Robbins Tues, Oct 2 5:00 PM Moscone West, Room 3007 Using PeopleTools 8.5x capabilities like: related content, embedded help, pivot grids, hover-over, and more, Jeff will discuss how these can deliver business value and innovation which will positively impact your business without the high costs associated with upgrading your PeopleSoft applications. Check out a more detailed list here. We look forward to meeting you all there!

Read the article

Issues printing through ssh tunnel and port forwarding

- by simogasp

I'm having some problems trying to print through a ssh tunnel. I'd like to print from my laptop to a network printer (Toshiba es453, for what matters) which is in a local network. I can reach the local network using a gateway. So far I did the following: ssh -N -L19100:<Printer_IP>:9100 <username>@<ssh_gateway> Basically i just mapped the port 19100 of my laptop directly to the input port of the printer, passing through the gateway. So far, so good. Then, i tried to install on my laptop a new printer with the GUI config tool of ubuntu, so that the new printer is on localhost at port 19100 (as APP Socket/HP Jet Direct) , then I provided the proper driver of the printer. In theory, once the tunnel is open I should be able to print from any program just selecting this printer. Of course, it does not work. :-) The document hangs in the queue with status Processing while in the shell where I set up the tunnel I get these errors on failing opening channels debug1: Local forwarding listening on ::1 port 19100. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 19100. debug1: channel 1: new [port listener] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 3: new [direct-tcpip] channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44434, nchannels 4 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] channel 3: open failed: connect failed: Connection timed out debug1: channel 3: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44443, nchannels 4 channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44493, nchannels 3 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] As a further debugging test I tried the following. From a machine inside the local network I did a telnet <IP_printer> 9100, got access, wrote some random thing, closed the connection and correctly I got a print of what I had written. So the port and the ip of the printer should be correct. I tried the same from my laptop with the tunnel opened, the telnet succeeded but, again, the printer didn't print anything, getting the usual channel x: open failed: errors. I'm not a great expert on the matter, I just thought that in theory it was possible to do something like that, but maybe there is something that I didn't consider or I did wrong. Any clue? Thanks! Simone [update] As further debugging test, I tried to replicate the procedure from a machine in the local network. From that machine, I did ssh -N -L19100:<IP_printer>:9100 <username>@<ssh_gateway> (note that now the machine, the gateway and the printer are in the same local network) then I tried again the telnet test with telnet localhost 19100, I got access and everything, but I didn't get the print but the usual error channel 2: open failed: connect failed: Connection timed out Maybe I am missing some other connection to be forwarded or maybe this is not allowed by the administrators. Of course, if I connect via ssh tunneling to the local machine from my laptop through the gateway, I can successfully print using the lpr command (from the local machine). But this is what I would like to avoid (yes, I'm lazy...:-), I would like to have a more 'elegant' and transparent way to do that.

Read the article

Bash completion doesn't work, or is ignoring what I've typed; but works for commands

- by Neil Traft

Bash completion seems to be ignoring what I've typed (it tries to complete, but acts as if there's nothing under the cursor). I know I saw it work on this machine earlier today, but I'm not sure what has changed. Some examples: cd shows all directories under my current folder: $ cd co<tab><tab> cmake/ config/ doc/ examples/ include/ programs/ sandbox/ src/ .svn/ tests/ Commands like ls and less show all files and directories under my current folder: $ ls co<tab><tab> cmake/ config/ .cproject Doxyfile.in include/ programs/ README.txt src/ tests/ CMakeLists.txt COPYING.txt doc/ examples/ mainpage.dox .project sandbox/ .svn/ Even when I try to complete things from a different folder, it gives me only the results for my current folder (telling me that it is completely ignoring what I've typed): $ cd ~/D<tab><tab> cmake/ config/ doc/ examples/ include/ programs/ sandbox/ src/ .svn/ tests/ But it seems to be working fine for commands and variables: $ if<tab><tab> if ifconfig ifdown ifnames ifquery ifup $ echo $P<tab><tab> $PATH $PIPESTATUS $PPID $PS1 $PS2 $PS4 $PWD $PYTHONPATH I do have this bit in my .bashrc, and I have confirmed that my .bashrc is indeed getting sourced: if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi I've even tried manually executing that file, but it doesn't fix the problem: $ . /etc/bash_completion There was even one point in time where it was working for ls, but was not working for cd ... but I can't replicate that result now. Update: I also just discovered that I have terminals open from earlier that still work. I ran source .bashrc in one of them and afterwards completion was broken. Here is my .bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # # Modified by Neil Traft #source ~/.profile # Allow globs to expand hidden files shopt -s dotglob nullglob # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines or lines starting with space in the history. # See bash(1) for more options HISTCONTROL=ignoreboth # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # If set, the pattern "**" used in a pathname expansion context will # match all files and zero or more directories and subdirectories. #shopt -s globstar # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # Color the prompt export PS1="\[$(tput setaf 2)\]\u@\h:\[$(tput setaf 5)\]\W\[$(tput setaf 2)\] $\[$(tput sgr0)\] " # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi

Search Results

Search found 8411 results on 337 pages for 'django shell'.

Page 314/337 | < Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321 | Next Page >

- by Chris W.

- by becomingGuru

- by nbv4

- by Garreth 00

- by linkedlinked

- by andybak

- by pinaldave

- by Matthew Guay

- by Jason Fitzpatrick

- by DigitalGeekery

- by Rick Strahl

- by jamiet

- by andresv

- by dwahlin

- by eJugnoo

- by Rick Strahl

- by pramod

- by jjg

- by Zorn

- by Compudicted

- by Compudicted

- by PeopleTools Strategy

- by simogasp

- by Neil Traft

< Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321 | Next Page >