Search Results

Search found 16822 results on 673 pages for 'custom protocol'.

Page 317/673 | < Previous Page | 313 314 315 316 317 318 319 320 321 322 323 324  | Next Page >

• Broken web interface in WRT54G router

  - by asmo

  I flashed my WRT54G (v3) from a custom firmware to the lastest Linksys one (v4.21.1) Now the internet/LAN works fine, but the web interface (http://192.168.1.1/) shows broken pages. I tried to manually navigating to the firmware upgrade page (by entering its URL), but it is broken too and not working. I tried a 30/30/30 reset twice, but the broken web interface still shows up. I tried to flash using the tftp2.exe application, which told me that the router didn't respond to the request. I tried to flash using the Windows commandline TFTP protocol, but I don't know how to supply a password on this prococol. (there is a factory default password ("admin") which I can't remove since the web interface is broken)

  Read the article

• Windows 7: Add column to ALL music folders

  - by Joel Spolsky

  In Windows 7 Explorer, when I open a folder containing only music, it's smart enough to show me a custom set of columns (Name, #, Title, Contributing Artists, Album) that make sense for a music folder. However, I also always want to see a Length column. I can right click on the column headers and add the Length column, which is persistent for that folder, but when I go to another music folder, it doesn't have the new Length column. How do I set up Windows so that ALL music folders ALWAYS show me this column?

  Read the article

• changing the default port no of tomcat in ubuntu

  - by codeomnitrix

  Hii all i am trying to change the port no of my tomcat server installed in ubuntu. for this i have changed the file server.xml and made a change there as: <Connector port="8081" protocol="HTTP/1.1" connectionTimeout="20000" URIEncoding="UTF-8" redirectPort="8443" /> But the problem is that whenever i try to open the localhost:8081 it is working fine but when i tried to open localhost:8080 then it is still accessible. So please explain this why this is happening. Secondly when i made the default port to 80 then localhost:80 or localhost then it was not accessible. So please explain this why this is happening. Thanks in advance.

  Read the article

• file copy error from system to cifs mount

  - by dwpriest

  When coping a file greater than 64kB from an Ubuntu server to a CIFS mounted windows share, most of the data is copied, but it seems the last chunk doesn't get copied. The size doesn't match, and the md5 check sums don't match. I have plenty of file space, but then I use cp, I get the following... cp: closing `cloudBackup/asdf.txt': No space left on device Using rsync, I get the following... rsync: close failed on "/home/fluffy/cloudBackup/.asdf.txt.qrBWe6": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(752) [receiver=3.0.8] rsync: connection unexpectedly closed (29 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.8] I have full read/write permissions on the mounted share. I can copy via SSH just fine. Any ideas? Thank you

  Read the article

• Quickbooks and Cisco ASA 5505

  - by user41516

  I have a Cisco ASA 5505, and everything has seemed to function fine, however I have had problems with Quickbooks 2008 running super slow over the network (Samba) and narrowed it down to the Cisco box. Other Samba transfers seem to be pretty fast, and the Quickbooks file is not very large at all (<25 MB), and other Samba transfers seem to be fine. However, I'm not sure if Quickbooks uses another protocol or if there are other ports that need to be opened. Can anybody give me any clues on how to resolve or troubleshoot the problem or have any prior experience with running Quickbooks over a network?

  Read the article

• cannot access my own computer through My Network Places

  - by WebMAOhist

  My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

  Read the article

• webmail suite recommendation

  - by hoball

  Hello, I have serveral emails in a few domains (email@domain1, email@domain2, email@domain3). Currently they are on an owned email server and I am collecting emails via IMAP protocol (i would not like to use POP..) in Thunderbird. I have a few partners and I want to allow them to access the same email address. Here is what I desired: All users can open All the inboxes via IMAP @ Thunderbird (with proper configuration) at the same time, there are a webmail system, every user can login their account (userA, userB, userC), and they will see all inboxes (email@domain1, email@domain2, email@domain3) Would you recommend any suite that fits my needs? Either (a system to be installed on my server) or (a remote service where I need to config MX records) will do. Thank you.

  Read the article

• How to build a self-sufficient gcc/glibc/binutils set in a non-standard path?

  - by netvope

  Suppose a set of custom-built gcc/glibc/binutils are in $prefix (e.g. /home/user/path) I want: gcc to look for libraries in $prefix/lib64 instead of /lib64 gcc to look for headers in $prefix/include instead of /include to use $prefix/lib64/ld-linux-x86-64.so.2 as the (hard-coded) loader path instead of /lib64/ld-linux-x86-64.so.2 the dynamic loader to look for shared libraries in $prefix/lib64 instead of /lib64 How should I configure the builds? Do I need to modify gcc's specs file or do anything else?

  Read the article

• OpenDB Alternative

  - by shaiss

  Although a good tool OpenDB hasn't been updated since 12/2008. The source code shows some recent activity, but still sparse at best. Anyone know of good web based cataloging alternatives? I'm looking to catalog the 500+ software CD's we have. Also, as a side note. OpenDB will handle software, but you have to create a custom media type, which is a PAIN!!!

  Read the article

• Running IPv4 program in IPv6 network

  - by stobyer

  I have an IPv4 windows client program and IPv4 Linux server. What I need is to run them in pure IPv6 network, although machines have dual stack. At the beginning I thought it's not a problem: I'll use 4in6 protocol (rfc2473) and that's all. I found a simple guide for Linux configuration here, but when I started to configuring windows 7, I couldn't find how to do it. There are plenty of info on how to tunnel IPv6 over IPv4 (6in4, Teredo) but not an opposite. Does anyone know how to do it? Thank you.

  Read the article

• Function keys over SSH/PuTTY to SCO unix

  - by CyberKing

  I am trying to set up SSH to a SCO Unix server that runs custom software that uses the function keys on the keyboard, however the keys do not appear to be in the correct format for SCO to recognise. None of the keyboard options on PuTTY work, including the SCO option. How do I change the keycodes that SCO/bash is looking for when it wants a function key? If it helps, the system is upgrading from Wyse50 terminals. thanks!

  Read the article

• tcpdump dns output codes

  - by tim

  Captured on the nameserver: 21:54:35.391126 IP resolver.7538 > server.domain: 57385% [1au] A? www.domain.de. (42) What das the percent sign in 57385% mean? As far as I can see 57385 is the clients sequence number, a plus would mean RD bit set. Second question: what does the ARCOUNT do in the query? As I understand the tcpdump man page the [1au] means tcpdump treats this as a protocol anomalie - as would I. I see this in a lot of queries.

  Read the article

• Matching ID3 Tags to Existing Files

  - by SLaks

  I have a collection of ripped CDs that were transcoded to a very low bitrate. (and I lost the original MP3s) I'd like to re-rip the CDs to a higher bitrate, and apply the ID3 tags from the existing rips to the new files. (These are custom tags; they will not be found in online databases) Is there any way to automatically copy ID3 tags by length and track number, or do I need to write one myself?

  Read the article

• Why can't SVN checkout into a virtualbox shared folder?

  - by Alex Waters

  I am trying to checkout into the virtualbox shared folder with svn 1.7 in ubuntu 12.04 running as a guest on a windows 7 host. I had read that this error was a 1.6 problem, and updated - but am still receiving the error: svn: E000071: Can't move '/mnt/hostShare/code/www/.svn/tmp/svn-hsOG5X' to '/mnt/hostShare/code/www/trunk/statement.aspx?d=201108': Protocol error I found this blog post about the same error in a mac environment, but am finding that changing the folder/file permissions does nothing. vim .svn/entires just has the number 12 - does this need to be changed? Thank you for any assistance! (just another reason for why I prefer git...)

  Read the article

• export block device over network without root

  - by dschatz

  I'm trying to export a file as a block device over the network. I do not have root access on the machine where the file exists. I do have root access on the machine(s) where I will mount the block device. I've seen ATA-Over-Ethernet and ISCSI but there don't seem to be any implementations which allow me to export the block without root at least (some even require kernel modules). Is there an implementation of either of these or some other protocol that doesn't require root? Perhaps I can tunnel ethernet over IP to do this?

  Read the article

• Testing performance from around the world - how do I get a linux shell easily in multiple countries?

  - by Matthew O'Riordan

  We are building a socket based service where latency is paramount, and as such we have servers distributed into 7 data centres around the world. However, whilst we know we're bringing the servers closer to the clients, it's very difficult to know how effective this is, and importantly, what difference this makes compared to our competitors. As such, we want to run simple scripts that test latency and throughput for both our service and our competitors, which is easy enough using Amazon, however Amazon only have 7 data centres. We would like to know for example how we perform in locations all over the world such as South Africa, Australia, China, Peru etc. Does anyone know of any service where we could piggy back off their global infrastructure and run some scripts to test this performance? The obvious contenders are people like Monitis, but I don't think they would allow us to run custom scripts, only standard protocol monitors. Thanks for your help. Matt

  Read the article

• xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)

  - by mazgalici

  root@mazgalici:~# startx X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-28-server i686 Ubuntu Current Operating System: Linux mazgalici 2.6.18-194.26.1.el5.028stab079.2PAE #1 SMP Fri Dec 17 19:34:22 MSK 2010 i686 Kernel command line: quiet Build Date: 10 November 2010 11:25:26AM xorg-server 2:1.7.6-2ubuntu7.4 (For technical support please see ) Current version of pixman: 0.16.4 Before reporting problems, check to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 11 01:28:48 2011 (==) Using config directory: "/usr/lib/X11/xorg.conf.d" Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory) Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log

  Read the article

• How to change the default terminal emulator on Windows (cmd)?

  - by alex

  Is it possible to change the default terminal emulator on Windows (7 and 8 in particular) from cmd to, for example, Console2 or ConEmu? In essence, I want all command line tools, whether launched by double clicking, from "Run" or by other processes to use the custom terminal. This is a trivial matter on Linux, is it even possible on Windows? It would be especially helpful if this could be done via a script.

  Read the article

• anti-static foam under a motherboard?

  - by user29734

  I am modding out a custom built case/system. I have my motherboard mounted on a metal tray, (Dell did this) has been working great. Not I am modding the case to hold everything and how I want to mount the motherboard on the tray I have a slight gap between the wall of the case and the motherboard/tray. Can I put a piece of thin anti-static foam/packaging in between the tray and the case? That is safe right?

  Read the article

• Using VLC to Unicast High Definition Webcam over local gigabit LAN with low/zero delay

  - by Robin Day

  We're setting up a webcam "window" between two offices in the same buildilng. The two PC's are connected to the same gigabit switch. We're using VLC to stream the webcam over HTTP using the following commands. vlc dshow:// :dshow-caching="0" :dshow-size="640x480" :sout=#transcode{vcodec=h264,vb=0,scale=0}:http{mux=ffmpeg{mux=flv},dst=:8080/} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep vlc http://192.168.0.1:8080 :http-caching="0" Even with the caching set to zero, the delay in the image is a good 2-3 seconds. The CPU usage of each pc is also maxed. I'm guessing it's the transcoding that's causing much of the delay. Can anyone give me some changes to these command lines that will reduce the transcoding power, or send the webcam over a different protocol, or anything that will reduce the delay of the cameras? Bandwidth is not an issue at all as the pc's can be connected to a dedicated switch/vlan if required.

  Read the article

• AWS:EC2:: Could not connect FTP client?

  - by heathub

  My Server OS: Amazon Linux I am trying to set up ftp. I have: Installed vsftpd open port 20-21 open port 1024 - 1048 Basically, I followed every of these steps Start vsftpd service (the status indicate [ok]) I use filezilla for my ftp client. Here is my setting/configuration: Host: ec2-XX-XX-XXX-XX.compute-1.amazonaws.com Port: -(blank, but I have tried 20 and 21 though) Server Type: FTP - File Transder Protocol Logon Type: Normal Username: (tried root and ec2-user) Transfer mode: Tried passive and active I always has this error: Status: Waiting to retry... Status: Resolving address of ec2-XX-XX-XXX-XX.compute-1.amazonaws.com Status: Connecting to XX.XX.XXX.XX:21... Error: Connection timed out Error: Could not connect to server Have I missed any configuration/settings? EDIT After execute the /sbin/iptables -L -n Here is the result: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• Reporting Services 2008 configuration for basic authentication using username and password

  - by Paul

  I want to configure Reporting Services 2008 to use a custom defined username and password for access. I read that I must set reporting services to do basic authentication : <AuthenticationTypes> <RSWindowsBasic/> </AuthenticationTypes> But I didn't find specified a location where I might create usernames and passwords.

  Read the article

• Is it possible to use bittorrent for a fileserver

  - by sris

  I would like to set up a file server that is searchable, preferable via the web. I'm wondering if it would be possible to achieve this using the bittorrent protocol and have a single client sharing every single torrent on the server. I guess I could use some available tracker solution for the webinterface or write one myself. My concerns are the if there are any limits to the number of torrents a single client can share since this may potentially be 10k torrents. The number of downloading clients is very small, only myself and my relatives. The idea is to have a single place to host everything from vacation photos to musical creations. Is there any other options for this kind of file server. It should also be easy to upload files to the server.

  Read the article

• linux + automated rsync command

  - by Diana

  my target is to copy /tmp/my_file from 10.10.10.1 to my Linux machine without login and password , I set the passwords file with the right password - secret123 so rsync should work , please advice why I get Permission denied. Remark - 10.10.10.1 address is linux machine version – red hat 5.3 rsync -WavH --password-file=/tmp/passwords --progress [email protected]:/tmp/my_file . Permission denied. rsync: connection unexpectedly closed (0 bytes read so far) rsync error: error in rsync protocol data stream (code 12) at io.c(165) more /tmp/passwords secret123 ls -ltr passwords -rwxr-xr-x 1 root root 10 Sep 12 17:32 passwords

  Read the article

• Apt Stalls When Using HTTP Sources

  - by UltraNurd

  I was getting some to me inexplicable behavior from apt-get/aptitude on an admittedly crusty old webserver. While it was otherwise running fine, as soon as I tried a package upgrade, after a downloading a few updates it would stall completely, then my SSH session hung (and I was unable to reconnect), thus requiring a hard restart. First, I switched to a different package source in /etc/apt/sources.list, but still got the same behavior. At this point I was assuming the NIC was dying in some weird way... but as soon as I changed the package source to use FTP instead of HTTP, everything worked fine, and I was able to upgrade. For now I'm not too concerned since I have an easy work around, but it implies that there's something very weird with my network setup, since it seems to be protocol (or port?) specific. I didn't think any of my NAT setup would affect outbound traffic, but I could be crazy. Any ideas what I should try to look for?

  Read the article

< Previous Page | 313 314 315 316 317 318 319 320 321 322 323 324  | Next Page >