Search Results

Search found 14924 results on 597 pages for 'kernel mode'.

Page 317/597 | < Previous Page | 313 314 315 316 317 318 319 320 321 322 323 324  | Next Page >

• connecting to bsnl wll, with huawei fixed wireless modem with connected to usb port on linux mint.

  - by Rakesh

  On windows, when I plugged in the usb connector, to the device was recognized as a mass storage device and installed all the drivers, to my computer, then the device, automatically restarted and started behaving like a modem, I'm writing this post, using the same modem, through windows... On linux mint (debian kernel, similar to ubuntu 8.10), the device is recognized as a mass storage device, some times, but, has no programs, useful for linux... When I use the modem on windows and restart the computer and login to linux, the device shows up as "not yet configured" in the terminal command "lsusb"... I googled a lot for solutions, tried many things, atlast, configured it and run the command "wvdial". But, get the error, that the modem is not responding, at last ! :'( Please help me out... Many more people are facing this problem, as I could discover, when I googled for it. this is the website address of huawei, the company of my modem... "www.huawei.com" Specification: model: ETS1220 FEQ: 800M Thank you.

  Read the article

• Fedora14 serial console how-to needed

  - by lamba2

  Has anyone ever got a serial console working in fedora 14 ? Is it as simple as adding to grub: serial --unit=0 --speed=38400 terminal --timeout=10 serial console and add to the kernel lines: console=tty0 console=ttyS0,38400 ??? If so, this isn't working for me. I have agetty installed, and im using minicom, although i've heard you can also use "screen /dev/ttyUSB0" on the client side. The /etc/init/serial.conf file suggests it should be working, but nothing. Currently getting no joy from any of this after 2 days. Does anyone know a method that definitely works on fedora 14 ? (no /etc/event.d/ needed or such) edit: Client side im using a null modem cable and usb-serial adaptor.

  Read the article

• Mysql::Error: Duplicate entry

  - by Shaliko

  Hi I have a model class Gift < ActiveRecord::Base validates_uniqueness_of :giver_id, :scope => :account_id end add_index(:gifts, [:account_id, :giver_id], :uniq => true) Action def create @gift= Gift.new(params[:gift]) if @gift.save ... else ... end end In the "production" mode, I sometimes get an error ActiveRecord::StatementInvalid: Mysql::Error: Duplicate entry '122394471958-50301499' for key 'index_gifts_on_account_id_and_user_id' What the problem?

  Read the article

• Mysql::Error: Duplicate entry

  - by Shaliko

  Hi I have a model class Gift < ActiveRecord::Base validates_uniqueness_of :giver_id, :scope => :account_id end add_index(:gifts, [:account_id, :giver_id], :uniq => true) Action def create @gift= Gift.new(params[:gift]) if @gift.save ... else ... end end In the "production" mode, I sometimes get an error ActiveRecord::StatementInvalid: Mysql::Error: Duplicate entry '122394471958-50301499' for key 'index_gifts_on_account_id_and_giver_id' What the problem?

  Read the article

• Problem getting ar_mailer/ar_sendmail working on new server

  - by Max Williams

  Hey all. I've got a new app up and running on a new ubuntu server. It's working fine generally but i can't get ar_sendmail working. I'm following the instructions on this page: http://www.ameravant.com/posts/sending-tons-of-emails-in-ruby-on-rails-with-ar_mailer The setup is all done, ie i can "deliver mails" which just saves records in my Email table. Now i want to get the ar_sendmail daemon running to actually send them. (so i'm at 'Running ar_sendmail in daemon mode' in that web page). First thing: ar_sendmail --mailq >>ar_sendmail: command not found Ok...so, where is ar_sendmail? I have a look and there's an ar_sendmail file in the bin folder of the ar_mailer plugin, so i add the location of that to my path. I don't know if this was the right thing to do or not. Ok, so try again. ar_sendmail --mailq /var/www/apps/millionaire/vendor/plugins/ar_mailer/bin/ar_sendmail:3:in `require': no such file to load -- action_mailer/ar_sendmail (LoadError) from /var/www/apps/millionaire/vendor/plugins/ar_mailer/bin/ar_sendmail:3 hmm. Here's the offending file, there's not much there. #!/usr/bin/env ruby require 'action_mailer/ar_sendmail' ActionMailer::ARSendmail.run ok...so it literally is just trying to require this and can't find it. The file, action_mailer/ar_sendmail.rb is in the ar_mailer plugin, in it's lib folder. So, given that it's being called from inside the plugin, it should be able to see this right? I've got a feeling that i'm way off the track here and have missed something simple. Can anyone set me straight? I'm using rails 2.3.4 in case that's relevant. EDIT - i just realised something kind of dumb: when i call ar_sendmail from the command line like this, i'm just loading that one file, which doesn't know where it's supposed to look for the rest of the stuff, i think. Which really makes me think that i'm not trying to run the right thing. Is the ar_sendmail daemon a seperate program altogether, that i would get with apt_get or something? EDIT2 - i made some progress by installing the ar_mailer gem (which the guide said i shouldn't do) and that does seem to run. It's sending some mail request somewhere and clearing the Email table of pending emails. Running ar_sendmail in -ov (oneshot verbal) mode i see it report this for example: sent email 00000000019 from [email protected] to [email protected]: # So, it actually looks like it's working now and i just need to set up the ACTUAL THING WHICH SENDS EMAILS. sigh. still grateful for any advice. thanks, max

  Read the article

• Fatal error by Java runtime environment

  - by siri

  I am executing a junit test case I got the following error, A fatal error has been detected by the Java Runtime Environment: Internal Error (classFileParser.cpp:3174), pid=2680, tid=2688 Error: ShouldNotReachHere() JRE version: 6.0_18-b07 Java VM: Java HotSpot(TM) Client VM (16.0-b13 mixed mode windows-x86 ) Can any body please suggest the solution to resolve

  Read the article

• Action Item shown only in Landscape?

  - by roboguy12

  I was just wondering if it were at all possible for an Action Bar icon to only be shown when the device is in landscape mode? In portrait I have an onscreen button for a certain task, but in order to take advantage of all of the screen-space in landscape, that button won't fit. So I was wondering if I could put it in the Action Bar, but it would only be necessary when the device is in landscape. Thanks!

  Read the article

• Consuming Web Services requiring Authentication from behind Proxy server

  - by Jan Petersen

  Hi All, I've seen a number of post about Proxy Authentication, but none that seams to address this problem. I'm building a SharePoint Web Service consuming desktop application, using Java, JAX-WS in NetBeans. I have a working prototype, that can query the server for authentication mode, successfully authenticate and retrieve a list of web site. However, if I run the same app from a network that is behind a proxy server (the proxy does not require authentication), then I'm running into trouble. The normal -dhttp.proxyHost ... settings does not seam to help any. But I have found that by creating a ProxySelector class and setting it as default, I can regain access to the authentication web service, but I still can't retrieve the list of web sites from the SharePoint server. It's almost as if the authentication I provide is going to the proxy rather than the SharePoint server. Anyone have any experience on how to make this work? I have put the source text java class files of a demo app up, showing the issue at the following urls (it's a bit to long even in the short demo form to post here). link text When running the code from a network behind a proxy server, I successfully retrieve the Authentication mode from the server, but the request for the Web Site list generates an exception originating at: com.sun.xml.internal.ws.transport.http.client .HttpClientTransport.readResponseCodeAndMessage(HttpClientTransport.java:201) The output from the source when no proxy is on the network is listed below: Successfully retrieved the SharePoint WebService response for Authentication SharePoint authentication method is: WINDOWS Calling Web Service to retrieve list of web site. Web Service call response: -------------- XML START -------------- <Webs xmlns="http://schemas.microsoft.com/sharepoint/soap/"> <Web Title="Collaboration Lab" Url="http://host.domain.com/collaboration"/> <Web Title="Global Data Lists" Url="http://host.domain.com/global_data_lists"/> <Web Title="Landing" Url="http://host.domain.com/Landing"/> <Web Title="SharePoint HelpDesk" Url="http://host.domain.com/helpdesk"/> <Web Title="Program Management" Url="http://host.domain.com/programmanagement"/> <Web Title="Project Site" Url="http://host.domain.com/Project Site"/> <Web Title="SharePoint Administration Tools" Url="http://host.domain.com/admin"/> <Web Title="Space Management Project" Url="http://host.domain.com/spacemgmt"/> </Webs> -------------- XML END -------------- Br Jan

  Read the article

• MacBook not connecting anywhere via VPN

  - by Toby

  I was wondering if someone could help me troubleshoot this issue. I have a handful of VPNs set up on my MacBook (Snow Leopard) which I know are working, but today when I tried to use them I get the following error in all cases: could not find the PPP kernel extension I have not needed to use any VPN for a while but they have worked in the past and there is nothing I can think of that I have changed on this machine. I have looked in System/Library/Extensions and PPP.kext is there which is the file I thought it would be looking for? Any help would be greatly appreciated.

  Read the article

• Differing packages between Ubuntu 9.04 and 9.10

  - by bergyman

  So I've been playing around with VirtualBox and both of the above Ubuntu versions and I've noticed that there are some differences between the available packages when doing a apt-cache search <package>. Some of these I'm sure are obvious, as they potentially only work on their respective systems. But I've noticed specifically several ruby packages differ. So my question is whether or not there's a way to get some of the ruby packages (ruby1.9.1-full for example) which only seem to be available on 9.10 (yup, I did a sudo apt-get update on both 9.10 and 9.04) on my 9.04 system? Is there a way I can just do a kernel upgrade on 9.04, or whatever else may be needed in order to get at these more recent packages?

  Read the article

• My linux server takes more than an hour to boot. Suggestions?

  - by jamieb

  I am building a CentOS 5.4 system that boots off a compact flash card using a card reader that emulates an IDE drive. It literally takes about an hour to boot. The ultra-slow part occurs when Grub is loading the kernel. Once that's done, the rest of the boot process only takes about a minute to get to a login prompt. Does anyone have any suggestions? I suspect that it may have to do with UDMA. Everything IDE-related in my BIOS seems to checkout. The read performance hdparm is telling me 1.77 MB/s. Ouch! (But even at that rate, it still shouldn't take an hour to decompress and load the kernel) [root@server ~]# hdparm -tT /dev/hdc /dev/hdc: Timing cached reads: 2444 MB in 2.00 seconds = 1222.04 MB/sec Timing buffered disk reads: 6 MB in 3.39 seconds = 1.77 MB/sec Trying to enable DMA is a no-go though: [root@server ~]# hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Here's some command outputs that might help: System [root@server ~]# uname -a Linux server.localdomain 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux PCI info: [root@server ~]# lspci -v 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation 82945G/GZ Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] I/O ports at ff00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at fe00 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at fd00 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at fc00 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at fb00 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at f800 [size=16] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller Flags: medium devsel, IRQ 17 I/O ports at 0500 [size=32] 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at de00 [size=256] Memory at fdeff000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at dc00 [size=256] Memory at fdefe000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at da00 [size=256] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 hdparm ouput: [root@server ~]# hdparm /dev/hdc /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 8146/16/63, sectors = 8211168, start = 0 [root@server ~]# hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: InnoDisk Corp. - iCF4000 4GB Serial Number: 20091023AACA70000753 Firmware Revision: 081107 Standards: Supported: 5 Likely used: 6 Configuration: Logical max current cylinders 8146 8146 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 8211168 LBA user addressable sectors: 8211168 device size with M = 1024*1024: 4009 MBytes device size with M = 1000*1000: 4204 MBytes (4 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 2 Current = 2 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * CFA feature set * Mandatory FLUSH_CACHE HW reset results: CBLID- above Vih Device num = 0 CFA power mode 1: enabled and required by some commands Maximum current = 100ma Checksum: correct

  Read the article

• How can I provide an ASP.NET Forms Authentication UX while using Active Directory Role and Authentic

  - by Nate Bross

  Is it possible to use this Role Provider AspNetWindowsTokenRoleProvider with ASP.NET FORMS Authentication (via this MembershipProvider System.Web.Security.ActiveDirectoryMembershipProvider)? It seems to only work with <authentication mode="Windows">, is it possible to use it with FORMS? background -- The objective here is to provide an ASP.NET Forms UX while using Active Directory as the back-end authentication system. If there is another, easy way to do this using built-in technologies, that's great and I'd like to hear about that as well.

  Read the article

• Jquery Dialog - div disappears after initialization

  - by Zuber

  JQuery Dialog is giving me lots of pain lately. I have the following div which I want to be popped up. (Ignore that the classes do not show the double quotes in the syntax) TABLE class=widget-title-table border=0 cellSpacing=0 cellPadding=0> <TBODY> <TR> <TD class=widget-title><SPAN class=widget-title>Basic Info</SPAN></TD> <TD class=widget-action> <DIV id=edit-actions jQuery1266325647362="3"> <UL class="linkbutton-menu read-mode"> <LI class="control-actions"> <A id="action-button" class="mouse-over-pointer linkbutton">Delete this stakeholder</A> <DIV id="confirmation" class="confirmation-dialog title=Confirmation"> Are you sure you want to delete this stakeholder? </DIV> </LI></UL></DIV></TD></TR></TBODY></TABLE> The JQuery for this is ... $(document).ready(function() { $('#confirmation').dialog({ bgiframe: true, modal: true, autoOpen: false, closeOnEscape: false, draggable: true, position: 'center', resizable: false, width: 400, height: 150 }); }); And the dialog is 'open'ed by var confirmationBox = $('#confirmation',actionContent); if (confirmationBox.length > 0) { //Confirmation Needed $(confirmationBox).dialog('option', 'buttons', { 'No': function() { $(this).dialog('close'); }, 'Yes': function() { $('ul.read-mode').hide(); $.post(requestUrl, {}, ActionCallback(context[0], renderFormUrl), 'json'); $(this).dialog('close'); } }); $(confirmationBox).dialog('open'); } The problem starts in the initialization itself. When the document loads, the <div #confirmation> is deleted from the markup! I had a similar issue earlier, but I cannot use that solution here. On this page I can have multiple PopUp divs. When I added the initialization in just before opening it; the form popped up. But after I close it, the div is removed; so I am not able to see the popup again.

  Read the article

• Completely uninstalling both versions of XCode

  - by Mugunth Kumar

  As usual I typed sudo Library/uninstall-devtools --mode=all It uninstalled the first version (Beta) properly. Tried the same thing on the older Stable Version which I have installed to "XCode Stable" Getting this error Use of uninitialized value $dir_name in substitution (s///) at Library/uninstall-devtools line 153. Use of uninitialized value $developer_dir in concatenation (.) or string at Library/uninstall-devtools line 120 Anyone else facing this problem? Can I just trash the installation folder?

  Read the article

• Dumping a Linux console scrollback buffer?

  - by Gerald Combs

  We would like to save the output of a program run on a Linux console which spans many lines. Unfortunately it wasn't logged or run under screen, or any other way that lets us easily capture the output. The best method we've been able to come up with so far is: Log into the machine via a separate SSH session In the console session, page to the top of the buffer Repeat: In the SSH session, run "cat /dev/vcs >> screendump.txt" In the console session, page down one screen Dump the final screen in the SSH session Is there a better way? It seems like if the VC memory were contiguous and you knew where it was you could use dd to pull the console text directly out of kernel memory and into a file.

  Read the article

• Permanent Routes Centos Questions

  - by user65053

  So with a little help I figured out how to setup these routes and I can set them in rc.local route add -net 208.82.236.0 netmask 255.255.255.0 dev ppp0 metric 1 route add -net 208.82.236.0 netmask 255.255.255.0 dev eth0 metric 10 my question is being that the first route is ppp0 as soon as I disconnect the modem the route is dropped how do I maintain the route or make it permanent so that next time the modem connects it will follow the route. Currently after ppp0 disconnects the route is dropped netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface laxapx03.o1.com * 255.255.255.255 UH 0 0 0 ppp0 208.82.236.0 * 255.255.255.0 U 0 0 0 eth0 10.0.1.0 * 255.255.255.0 U 0 0 0 eth0 169.254.0.0 * 255.255.0.0 U 0 0 0 eth0 default 10.0.1.1 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Any reasons to recompile Silverlight 3 controls for Silverlight 4?

  - by Alan Mendelevich

  When I release a custom control which works in both Silverlight 3 and Silverlight 4 is there any reason to provide a separate binary version targeted at Silverlight 4? As far as I understand SL4 apps using SL3 controls run normally in SL4 mode but maybe there are some hidden benefits of recompiling controls for SL4 (or gotchas of not doing so).

  Read the article

• UISwitch not tapped on right area

  - by beryllium

  I placed UISwitch on main view. Now I try change state. But the state changed only when I touch on the left side of the UISwitch. and never on the right. For example in Settings App the airplane mode chanhed any of those ways. Can anybody help me?

  Read the article

• Insert a Row with a sorted DataGridView

  - by Ruben Trancoso

  My DataGridView is bound to the same BindingSource as the Insert Form, and the Name column is sorted. After insert is done, the groupBindingSource.Current is not returning the new inserted DataRowView but the last row in the sort order what makes the Update do nothing. FormGroup formGroup = new FormGroup(); formGroup .Source = groupBindingSource; formGroup .setMode(FormGroup.Mode.Insert); if (formGroup .ShowDialog() == DialogResult.OK) { DataRowView drv = (DataRowView)groupBindingSource.Current; grupoTableAdapter.Update(drv.Row); }

  Read the article

• Speed Problem with Wireless Connectivity on Cisco 877w

  - by Carl Crawley

  Having a bit of a weird one with my local LAN setup. I recently installed a Cisco 877W router on my DSL2+ connection and all is working really well.. Upgraded the IOS to 12.4 and my wired clients are streaming connectivity superfast at 1.3mb/s. However, there seems to be an issue with my wireless clients - I can't seem to stream any data across the local wireless connection (LAN) and using the Internet, whilst responsive enough isn't really comparable with the wired connection speed. For example, all devices are connected to an 8 Port Gb switch on FE0 from the Router with a NAS disk and on my wired clients, I can transfer/stream etc absolutely fine - however, transferring a local 700Mb file on my local LAN estimates 7-8 hours to transfer :( The Wireless config is as follows : interface Dot11Radio0 description WIRELESS INTERFACE no ip address ! encryption mode ciphers tkip ! ssid [MySSID] ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 channel 2462 station-role root rts threshold 2312 world-mode dot11d country GB indoor bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding All devices are connected to the Gb Switch which is connected to FE0 with the following: Hardware is Fast Ethernet, address is 0021.a03e.6519 (bia 0021.a03e.6519) Description: Uplink to Switch MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 14000 bits/sec, 19 packets/sec 5 minute output rate 167000 bits/sec, 23 packets/sec 177365 packets input, 52089562 bytes, 0 no buffer Received 919 broadcasts, 0 runts, 0 giants, 0 throttles 260 input errors, 260 CRC, 0 frame, 0 overrun, 0 ignored 0 input packets with dribble condition detected 156673 packets output, 106218222 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Not sure why I'm having problems on the wireless and I've reached the end of my Cisco knowledge... Thanks for any pointers! Carl

  Read the article

• inline assembly error

  - by Manish

  I am using inline assembly for iphone, I working for device debug mode. The instruction is as follows: __asm__("smlatb %0, %1, %2 ,%3 \n\t": "=r"(Temp): "r"(treg5) : "r"(fac5) : "r"(Temp) ); And I am getting an errors: error : expected ')' before tokedn '(' error: unknown register name 'r' in 'asm' I am using X-code 3.0 and gcc 4.0. Any ideas?

  Read the article

• NTFS write speed really slow (<15MB/s) on Ubuntu

  - by Zulakis

  When copying large files or testing writespeed with dd, the max writespeed I can get is about 12-15MB/s on drives using the NTFS filesystem. I tested multiple drives (all connected using SATA) which all got writespeeds of 100MB/s+ on Windows or when formatted with ext4, so it's not an alignment or drive issue. top shows high cpu usage for the mount.ntfs process. AMD dual core processor (2.2 GHz) Kernel version: 3.5.0-23-generic Ubuntu 12.04 ntfs-3g version: both 2012.1.15AR.1 (Ubuntu default version) and 2013.1.13AR.2 How can I fix the writespeed?

  Read the article

• WMI: Editing the Registry Remotely

  - by Quanta

  I'm trying to use the following code (poorly written, but it's just a proof of concept) to edit the registry of a computer on a domain. I have a domain account, and I've verified that the domain admin group is present in the local admin group on the machines I'm attempting to affect. I've connected to these other machines to perform other administrative type tasks, so I'm sure that I have administrative privileges on these hosts. All of StdRegProv's "get" methods work fine (http://msdn.microsoft.com/en-us/library/aa393664%28VS.85%29.aspx) but the "set" or "create" methods as well as check access all return "5" which is "Error_Access_Denied" according to winerror.h. So there's the problem: why do I get access denied when attempting to modify the registry? If anyone can help me figure this out, you'd have my utmost appreciation! I almost forgot, when I fire up Visual Studio in admin mode on my local machine and run the code against the local machine, it works flawlessly. If I don't start in admin mode on the local machine, the code fails, so I suspect there's a UAC problem maybe? using System; using System.Management; public class EditRemoteRegistry { public static void Main(string[] args) { ConnectionOptions options = new ConnectionOptions(); options.EnablePrivileges = true; options.Impersonation = ImpersonationLevel.Impersonate; options.Password = "password goes here"; //options.Authority = "my company's domain"; //options.Username = "Admin username"; ManagementScope scope = new ManagementScope("\\\\arbitraryhost\\root\\default", options); scope.Connect(); ManagementClass mc = new ManagementClass("StdRegProv"); ManagementBaseObject inParams = mc.GetMethodParameters("CreateKey"); inParams["hDefKey"] = (UInt32)2147483650; inParams["sSubKeyName"] = "Software\\Test"; ManagementBaseObject outParams = mc.InvokeMethod("CreateKey", inParams, null); //Should return a 0, but returns a 5, "Error_Access_Denied" Console.WriteLine("CreateKey Method returned " + outParams["returnValue"]); //This chunk works fine ManagementBaseObject inParams5 = mc.GetMethodParameters("GetDWORDValue"); inParams5["hDefKey"] = 2147483650; inParams5["sSubKeyName"] = "Software\\Test"; inParams5["sValueName"] = "testDWORDvalue"; ManagementBaseObject outParams5 = mc.InvokeMethod("GetDWORDValue", inParams5, null); Console.WriteLine("GetDWORDValue returned " + (UInt32)outParams5["returnValue"] + " "); Console.WriteLine((UInt32)outParams5["uValue"]); ManagementBaseObject inParams6 = mc.GetMethodParameters("SetStringValue"); inParams6["hDefKey"] = 2147483650; inParams6["sSubKeyName"] = "Software\\Test"; inParams6["sValueName"] = "TestStringValue"; inParams6["sValue"] = "Hello World!"; ManagementBaseObject outParams6 = mc.InvokeMethod("SetStringValue", inParams6, null); //Should return a 0, but returns a 5, "Error_Access_Denied" Console.WriteLine("SetStringValue returned " + outParams6["returnValue"]); Console.ReadKey(); } }

  Read the article

• Consuming SharePoint Web Services fails when behind Proxy server

  - by Jan Petersen

  Hi All, I've seen a number of post about consuming Web Services from behind a proxy server, but none that seams to address this problem. I'm building a desktop application, using Java, JAX-WS in NetBeans. I have a working prototype, that can query the server for authentication mode, successfully authenticate and retrieve a list of web site. However, if I run the same app from a network that is behind a proxy server (the proxy does not require authentication), then I'm running into trouble. The normal -dhttp.proxyHost ... settings does not seam to help any. But I have found that by creating a ProxySelector class and setting it as default, I can regain access to the authentication web service, but I still can't retrieve the list of web sites from the SharePoint server. Anyone have any experience on how to make this work? I have put the source text java class files of a demo app up, showing the issue at the following urls (it's a bit to long even in the short demo form to post here). link text When running the code from a network behind a proxy server, I successfully retrieve the Authentication mode from the server, but the request for the Web Site list generates an exception originating at: com.sun.xml.internal.ws.transport.http.client .HttpClientTransport.readResponseCodeAndMessage(HttpClientTransport.java:201) The output from the source when no proxy is on the network is listed below: Successfully retrieved the SharePoint WebService response for Authentication SharePoint authentication method is: WINDOWS Calling Web Service to retrieve list of web site. Web Service call response: -------------- XML START -------------- <Webs xmlns="http://schemas.microsoft.com/sharepoint/soap/"> <Web Title="Collaboration Lab" Url="http://host.domain.com/collaboration"/> <Web Title="Global Data Lists" Url="http://host.domain.com/global_data_lists"/> <Web Title="Landing" Url="http://host.domain.com/Landing"/> <Web Title="SharePoint HelpDesk" Url="http://host.domain.com/helpdesk"/> <Web Title="Program Management" Url="http://host.domain.com/programmanagement"/> <Web Title="Project Site" Url="http://host.domain.com/Project Site"/> <Web Title="SharePoint Administration Tools" Url="http://host.domain.com/admin"/> <Web Title="Space Management Project" Url="http://host.domain.com/spacemgmt"/> </Webs> -------------- XML END -------------- Br Jan

  Read the article

• Debugging a GEF Eclipse plugin

  - by darkie15

  All, How can we debug a Eclipse plug-in based on GEF? Currently, I have a Activator class and custom editor from Example . Yet I am not able to find any output for the plugin. I tried using the "Launch Eclipse in Debug Mode" and setting a breakpoint in the Activator constructor method, but do not find any debugging activities taking place. Can anyone please guide on how to go about with debugging?

  Read the article

< Previous Page | 313 314 315 316 317 318 319 320 321 322 323 324  | Next Page >