Search Results

Search found 9980 results on 400 pages for 'kernel extension'.

Page 319/400 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >

• Video and LAN Cards are not recognized on Intel DG41RQ MB

  - by artyom

  Hello, My 32 bit Debian Etch with Etch-n-Half kernel 2.6.24 and Etch-n-half video driver xserver-xorg-video-intel 2.2.1-1~etchnhalf2 does not recognize my on-board LAN and Video. I can work only with VESA display. And additional PCI LAN card (that I wanted to use for Cross-X-Cabel). output of lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 04:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10 According to MB Spec: Video: Intel G41 Express Chipset Graphics and Memory Controller Hub Graphics (GMCH) LAN: Realtek 8111D Gigabit Ethernet Controller LAN Support When I run dpkg-reconfigure xserver-xorg is suggest i810 driver but X does not start, it does not start with intel driver as well; only vesa. LAN I even can't find in lspci... the last Realtek card is external one 100MB card. Where to start from?

  Read the article

• Ideal Bacula appliance?

  - by Ricket

  I'm an intern at a small company and we (the IT department of two) manage <100 client computers and a handful of servers. Currently we're using a company's appliance to handle backup; it does a small backup every night and a full backup every weekend, and a guy comes on Wednesday to take an offsite backup drive (and gives back last week's drive to swap with it). Lately this system, mainly the appliance, has been having problems, so we are looking for an alternative. I'm researching other companies but also looking into what we might expect from trying to do this ourselves. There will undoubtedly be a large learning curve, but hey, that's what serverfault is for, right? :) So anyway I was looking at Bacula. Feature list sounds great, documentation is plentiful, but it's only software. So my question is, what is the ideal backup server to run the Bacula server software on? And not only the server but other related appliances. Our current backup appliance uses only hard drives, not tape drives. It has several plugged into it at one time, in hotswap bays on the front of the machine. I couldn't help but notice though, it's hardly more than Windows XP with hard drive bays, a PCI eSATA card (which connects to another appliance extension piece with 2 more bays), and their software. Since the company will take back their appliance if/when we cancel with them, where can I go to configure a server with these kinds of things? Maybe I'm being naive, I'm sure Dell (and any other computer company) sells them in the small business section of their website, but I wanted to make sure that there's not some other more recommended place that other companies are getting their hardware from, and that I don't need anything special for Bacula.

  Read the article

• WebLogic embedded LDAP crashes

  - by Spiff

  Our production admin server (WebLogic 10.3.5 running on Solaris 10) crashes from time to time. Logs show tons of these errors (several each minute): <1-Jun-2012 2:28:34 o'clock AM EDT> <Critical> <EmbeddedLDAP> <BEA-000000> <java.lang.NullPointerException at weblogic.socket.DevPollSocketMuxer.cleanupSocket(DevPollSocketMuxer.java:150) at weblogic.socket.DevPollSocketMuxer.cancelIo(DevPollSocketMuxer.java:166) at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:836) at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:760) at weblogic.ldap.MuxableSocketLDAP$LDAPSocket.close(MuxableSocketLDAP.java:128) at com.octetstring.vde.Connection.close(Connection.java:166) at com.octetstring.vde.WorkThread.executeWorkQueueItem(WorkThread.java:89) at weblogic.ldap.LDAPExecuteRequest.run(LDAPExecuteRequest.java:50) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:178) Eventually, the admin server runs out of memory: <1-Jun-2012 12:29:59 o'clock PM EDT> <Error> <Kernel> <BEA-000802> <ExecuteRequest failed java.lang.OutOfMemoryError: GC overhead limit exceeded. One does not necessarily cause the other, but it seems like a pretty good fit. When inspecting the WebLogic code, we see this: void cleanupSocket(MuxableSocket paramMuxableSocket, SocketInfo paramSocketInfo) { this.sockRecords[paramSocketInfo.getFD()] = null; // DevPollSocketMuxer.java:150 super.cleanupSocket(paramMuxableSocket, paramSocketInfo); } protected void cancelIo(MuxableSocket paramMuxableSocket) { super.cancelIo(paramMuxableSocket); cleanupSocket(paramMuxableSocket, paramMuxableSocket.getSocketInfo()); // DevPollSocketMuxer.java:166 } So paramMuxableSocket.getSocketInfo() would be null. I'm at a loss for explaining this... Anyone have an idea? Thanks!

  Read the article

• Disable raid member check upon mount to mount damaged nvidia raid1 member

  - by Halfgaar

  Hi, A friend of mine destroyed his Nvidia RAID1 array somehow and in trying to fix it, he ended up with a non-working array. Because of the RAID metadata, the actual disk data was stored at an offset from the beginning. I was able to identify this offset with dd and a hexeditor and then I used losetup to create a loop device with the proper offset, so that I could mount the partition. It was then that I ran into problems, namely that mount says: "mount: unknown filesystem type 'nvidia_raid_member'". I also had this when trying to mount a Linux MD component the other day, and because I can remember that doing that in the past worked, I surmised that it may be some kind of protection. I therefore booted an old Sysrescue CD and tried it there, which worked (because of the older version of mount/libc/kernel/whatever). I still need to try to get more data, and because I don't want to keep using that SysrecueCD, I'd like to be able to mount the disk on my normal system. So, my question is: can the check for a disk being a raid member be disabled? I guess I could also zero out blocks that look like the raid block, but I'd rather not... I made an image of the disk with par2 data, so it's revertable, but still...

  Read the article

• swapping or trashing with vast amounts of unmapped pagecache

  - by Marco

  I'm using kubuntu jaunty (i386 32bit), kernel 2.6.28-13-generic. I've 4Gb of RAM, of which only 3317Mb are seen by the system (I guess because of the 32bit system). I'm seeing that the pagecache utilization is continually growing, up to the point that the system is unusable (after a few days). This happens also when I don't do anything (all user applications closed and the bare minimum of services enabled). If enabled, the system starts to use swap space (using it all in the end). Even if swap is disabled, disk activity becomes continuous, with the system unresponsive. For example, right now the system is working (albeit a tad slow), with only firefox and wing ide running, and I have 2Gb cached with only 45Mb mapped: $ free total used free shared buffers cached Mem: 3346388 3247328 99060 0 8416 2117980 -/+ buffers/cache: 1120932 2225456 Swap: 2144668 519448 1625220 $ cat /proc/meminfo MemTotal: 3346388 kB MemFree: 97128 kB Buffers: 7872 kB Cached: 2120224 kB SwapCached: 413860 kB Active: 2304596 kB Inactive: 865984 kB Active(anon): 2279168 kB Inactive(anon): 830236 kB Active(file): 25428 kB Inactive(file): 35748 kB Unevictable: 32 kB Mlocked: 32 kB HighTotal: 2492940 kB HighFree: 5456 kB LowTotal: 853448 kB LowFree: 91672 kB SwapTotal: 2144668 kB SwapFree: 1625244 kB Dirty: 84 kB Writeback: 0 kB AnonPages: 629304 kB Mapped: 45768 kB Slab: 45600 kB SReclaimable: 21756 kB SUnreclaim: 23844 kB PageTables: 4468 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 3817860 kB Committed_AS: 3735020 kB VmallocTotal: 122880 kB VmallocUsed: 9352 kB VmallocChunk: 66600 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 888832 kB If I try to drop the caches, little happes: # sync ; echo 3 > /proc/sys/vm/drop_caches ; free total used free shared buffers cached Mem: 3346388 3220580 125808 0 3020 2100600 -/+ buffers/cache: 1116960 2229428 Swap: 2144668 519356 1625312 Right now I've vm.swappiness = 5, but I've tried also with 0 and 1 (without noticeable differences). I've also tried vm.vfs_cache_pressure = 50 and 150 (again, no differences). As I said the pagecache eats all memory even with swapping turned off. What is happening? How to avoid this? TIA, Marco

  Read the article

• swapping or trashing with vast amounts of unmapped pagecache

  - by Marco

  I'm using kubuntu jaunty (i386 32bit), kernel 2.6.28-13-generic. I've 4Gb of RAM, of which only 3317Mb are seen by the system (I guess because of the 32bit system). I'm seeing that the pagecache utilization is continually growing, up to the point that the system is unusable (after a few days). This happens also when I don't do anything (all user applications closed and the bare minimum of services enabled). If enabled, the system starts to use swap space (using it all in the end). Even if swap is disabled, disk activity becomes continuous, with the system unresponsive. For example, right now the system is working (albeit a tad slow), with only Firefox and wing ide running, and I have 2Gb cached with only 45Mb mapped: $ free total used free shared buffers cached Mem: 3346388 3247328 99060 0 8416 2117980 -/+ buffers/cache: 1120932 2225456 Swap: 2144668 519448 1625220 $ cat /proc/meminfo MemTotal: 3346388 kB MemFree: 97128 kB Buffers: 7872 kB Cached: 2120224 kB SwapCached: 413860 kB Active: 2304596 kB Inactive: 865984 kB Active(anon): 2279168 kB Inactive(anon): 830236 kB Active(file): 25428 kB Inactive(file): 35748 kB Unevictable: 32 kB Mlocked: 32 kB HighTotal: 2492940 kB HighFree: 5456 kB LowTotal: 853448 kB LowFree: 91672 kB SwapTotal: 2144668 kB SwapFree: 1625244 kB Dirty: 84 kB Writeback: 0 kB AnonPages: 629304 kB Mapped: 45768 kB Slab: 45600 kB SReclaimable: 21756 kB SUnreclaim: 23844 kB PageTables: 4468 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 3817860 kB Committed_AS: 3735020 kB VmallocTotal: 122880 kB VmallocUsed: 9352 kB VmallocChunk: 66600 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 888832 kB If I try to drop the caches, little happens: # sync ; echo 3 > /proc/sys/vm/drop_caches ; free total used free shared buffers cached Mem: 3346388 3220580 125808 0 3020 2100600 -/+ buffers/cache: 1116960 2229428 Swap: 2144668 519356 1625312 Right now I've vm.swappiness = 5, but I've tried also with 0 and 1 (without noticeable differences). I've also tried vm.vfs_cache_pressure = 50 and 150 (again, no differences). As I said the pagecache eats all memory even with swapping turned off. What is happening? How to avoid this?

  Read the article

• Can't delete C:\Config.Msi\75ce84f.rbf

  - by Hugh Allen

  I can't delete C:\Config.Msi\75ce84f.rbf It's not causing any problems but it's a mystery I'd like to solve, preferably before the next reboot because it's scheduled for deletion then (see pendmoves). it's not readonly, system or hidden it's not in use by another process (according to Process Explorer) the NT security permissions aren't the problem either - I am the owner and have Full Control ; as a double-check, the Effective Permissions tab shows that I have permission to delete. Yet trying to delete the file gives "Access is Denied" from both Explorer and cmd. I can however rename it or move it to another folder on the same drive. I can also read it and Virustotal says it's clean which is what I would expect (it's just a Windows Installer temp file - a copy of some DLL I think). The relevant line from Process Monitor is: 6:52:14.3726983 PM 112 Explorer.EXE SetDispositionInformationFile C:\Config.Msi\75ce84f.rbf CANNOT DELETE Delete: True Write 1232 Background: I'm using XP SP2. I recently repaired my Adobe Reader installation to make it the default browser plugin again instead of Foxit. (there seems to be no UI to do it otherwise?) So the installer did its thing and then asked to reboot. As is my habit when rebooting is inconvenient I declined the offer and ran pendmoves to find out what files the installer had scheduled to move / delete. It wanted to delete two files with .rbf extension (rollback files) located in C:\Config.msi\. (this applies to both even though I've been speaking about one). So I tried to delete them manually and couldn't. Does anyone have any ideas what could be preventing deletion? (and I don't think it's malware even though I'm not running AV at the moment)

  Read the article

• How to troubleshoot web server lock-up (Debian Squeeze)

  - by Ryan

  Every once in a while, my web server slows so significantly, it seems locked up. Can't SSH in, no sites being served. It's a VPS that started out as Debian 5 which I upgraded to testing (squeeze). It's a typical LAMP set-up with the sole purpose of running a couple of wordpress sites. One time when it locked up, I got to one of the sites, but it was wordpress complaining it couldn't establish a database connection. So it seemed as if something was really chewing up the CPU and mysqld either timed out, or possibly failed and couldn't restart. But since I couldn't SSH in I feel more inclined to attribute it to CPU. But the only processes running now, aside from OS and kernel stuff: apache mysqld python (for fail2ban) sshd exim4 It has 512M of RAM and 1.5 GB of swap. Every time I check on it, it has plenty of free memory and is using virtually no swap (usually 2-3M). And since I am running fail2ban I don't think I'm getting ddosed. I did find this in my logwatch email this morning (it locked up late last night, when there would have been very little traffic): 6 Time(s): [<ffffffff810a0ebc>] ? oom_kill_process+0x7e/0x23d 6 Time(s): [<ffffffff810a1505>] ? __out_of_memory+0x12a/0x141 6 Time(s): [<ffffffff810a1586>] ? out_of_memory+0x6a/0x94 I didn't find anything else suspicious. It can't be my provider's host because I can SSH in and restart the VM, and everything seems fine. Anybody know which logs I should start poring through to find the core of my problem? Thanks guys.

  Read the article

• mod_perl loses STDOUT in middle of request

  - by puzzled72

  Hi, I have been having this weird issue where mod_perl seems to lose STDOUT in the middle of the request. So far I have eliminated everything I could think of. You might have seen this bug related to the following errors in error_log : Apache2 IO flush: (103) Apache2::RequestIO::read: (104) Software caused connection abort They are all the same error. It happens when the perl script running under mod_perl loses STDOUT when trying to print the result back to apache. I only notice this error on my servers running the following: (centos5.4) Perl 5.8.8-27 mod_perl 2.0.4-6 httpd 2.2.3-31 kernel-2.6.18-164.15.1 It's not the code This code has been working for months It's not network related The browser gets the error response from apache. It's not time related I get the error 15 or so seconds after I restart httpd It's not idle httpd related I have tried reducing the min/max SpareServers to 1 It's not load related I get the error even if there are only 10 sessions on httpd It's not related to the "fd < PERLIO_MAX_REFCOUNTABLE_FD" perl 5.8.8 bug I recompiled perl-5.8.8 with the patch mentioned here : https://bugzilla.redhat.com/show_bug.cgi?id=559832, same error. It appeared sometime between December 2009 and February 2010 sorry I cannot be more specific Anyone has any idea ? Anything that I have not tested ? Really Puzzled!

  Read the article

• Installing messaging software displays error 1324 invalid character

  - by llykke

  Trying to install Reuters Messaging software onto a windows 7 pc we receive the error message Error 1324: The folder path 'My Documents' contains an invalid character We've tried installing the application using the local admin account and the user account which is an AD account (roaming?). This user account has administrative rights (i.e. should be allowed to install applications). The users 'My Documents' folder is located on a network drive, where only the user has access. We've tried experimenting with the HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer\ User Shell Folders registry entries and setting them to a local position (i.e. C:\Users\Username\Documents) but this didn't resolve the error. We've also tried the following which was taken from a website I can't remember the name of: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem Select the NtfsDisable8dot3NameCreation entry and change the value to 0 Select the Win31FileSystem entry and change the value to 0 which didn't resolve the issue. Edit: This was also an issue when attempting to install the citrix native client necessary to run citrix application (*.ica extension). This made the same error box appear.

  Read the article

• CloneZilla PXE Boot Without NFS

  - by John

  I am trying to setup CloneZilla to be bootable via PXE without using NFS. I do not have NFS running on our PXE server and would like to keep it that way. However, most of the information that I have found online indicates that you need to setup NFS in order to PXE boot CloneZilla. I believe that I am pretty close in getting it to work, but am not sure where to go next. Listed below are the different PXE menu option configurations that I have used so far. LABEL Clonezilla Live MENU LABEL Clonezilla Live KERNEL utilities/clonezilla/vmlinuz APPEND initrd=utilities/clonezilla/initrd.img boot=live live-config noswap nolocales edd=on nomodeset ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" o$ I have also tried the following append lines, without success: APPEND initrd=utilities/clonezilla/initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=tftp://10.130.155.23/filesystem.squashfs APPEND initrd=utilities/clonezilla/initrd.img boot=live union=aufs noswap noprompt vga=normal nomodeset nosplash fetch=tftp://10.130.155.23/filesystem.squashfs Each of them have resulted in a no go with the following error: "Unable to find a live file system on the network". It looks like it gets to the point of trying to load the filesystem.squashfs file, hangs, and then throws the error. Any help would be greatly appreciated.

  Read the article

• USB To Serial under OpenSuse 11.3

  - by Lars

  I have a LogiLink USB-To-Serial adapter. This has the PL2303 chip inside. When I insert the device: [26064.927083] usb 7-1: new full speed USB device using uhci_hcd and address 9 [26065.076090] usb 7-1: New USB device found, idVendor=067b, idProduct=2303 [26065.076099] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [26065.076105] usb 7-1: Product: USB-Serial Controller [26065.076110] usb 7-1: Manufacturer: Prolific Technology Inc. [26065.079181] pl2303 7-1:1.0: pl2303 converter detected [26065.091296] usb 7-1: pl2303 converter now attached to ttyUSB0 So the device is recognized and the converter is attached to ttyUSB0. When I do screen /dev/ttyUSB0 9600 I get the error: bash: /dev/ttyUSB0: Permission denied So I went looking in the file permissions. ls -l from the /dev folder reports: crw-rw---- 1 root dialout 188, 0 2011-04-26 15:47 ttyUSB0 I added my user lars to the dialout group. When I use the commands groups under lars it shows that I'm in the group. Though I still recieve the permissions denied error, as lars, and as root. I'm trying to connect to a console cable to configure some Cisco switches. My OS is OpenSuse 11.3 x86_64 with kernel version 2.6.34.7-0.7-desktop.

  Read the article

• Ext3 fs: Block bitmap for group 1 not in group (block 0). is fs dead?

  - by ip

  Hi, My company has a server with one big partition with Mysql database and php files. Now this partition seems to be corrupted, as reported from kernel messages when I tried to mount it manually: [329862.817837] EXT3-fs error (device loop1): ext3_check_descriptors: Block bitmap for group 1 not in group (block 0)! [329862.817846] EXT3-fs: group descriptors corrupted! I've tried to recovery it running tools from a PLD livecd. These are the tools I have tested: - e2retrieve - testdisk - photorec - dd_rescue/dd_rhelp - ddrescue - fsck.ext2 - e2salvage without any success. dumpe2fs 1.41.3 (12-Oct-2008) Filesystem volume name: /dev/sda3 Last mounted on: <not available> Filesystem UUID: dd51610b-6de0-4392-a6f3-67160dbc0343 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal filetype sparse_super Default mount options: (none) Filesystem state: not clean with errors Errors behavior: Continue Filesystem OS type: Linux Inode count: 9502720 Block count: 18987570 Reserved block count: 949378 Free blocks: 11555345 Free inodes: 11858398 First block: 0 Block size: 4096 Fragment size: 4096 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 16384 Inode blocks per group: 512 Last mount time: Wed Mar 24 09:31:03 2010 Last write time: Mon Apr 12 11:46:32 2010 Mount count: 10 Maximum mount count: 30 Last checked: Thu Jan 1 01:00:00 1970 Check interval: 0 (<none>) Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 128 Journal inode: 8 Journal backup: inode blocks dumpe2fs: A block group is missing an inode table while reading journal inode There's any other tools I have to test before considering these disk definitely unrecoverable? Many thanks, ip

  Read the article

• Unzip individual files from multiple zip files and extract those individual files to home directory

  - by James P.

  I would like to unzip individual files. These files have a .txt extension. These files also live within multiple zipped files. Here is the command I'm trying to use. unzip -jn /path/to/zipped/files/zipArchiveFile2011\*.zip /path/to/specific/individual/files/myfiles2011*.txt -d /path/to/home/directory/for/extract/ From my understanding, the -j option excludes directories and will extract only the txt files The -n option will not overwrite a file if it has already been extracted. I've also learned that the forward slash in /path/to/zipped/files/zipArchiveFile2011\*.zip is necessary to escape the wildcard (*) character. Here is sample of error messages I'm coming accross: Archive: /path/to/zipped/files/zipArchiveFile20110808.zip caution: filename not matched: /path/to/specific/individual/files/myfiles20110807.txt caution: filename not matched: /path/to/specific/individual/files/myfiles20110808.txt Archive: /path/to/zipped/files/zipArchiveFile20110809.zip caution: filename not matched: /path/to/specific/individual/files/myfiles20110810.txt caution: filename not matched: /path/to/specific/individual/files/myfiles20110809.txt I feel that I'm missing something very simple. I've tried using single quotes (') and double quotes (") around directory paths. But no luck.

  Read the article

• Webmin / Virtualmin running php as www-data, is locked out of viewing .htaccess and writing

  - by Kirill

  I've asked this on the virtualmin forums, but haven't had any help from there. Recently, "something" happened and it seems that the apache service has gone a bit weird. What it does: it runs all apache traffic as www-data and sometimes spawns the php5-cgi process as www-data, this is a problem because all the domain users own their directories and default permissions don't let www-data write to these folders (file uploads are dead) or read .htaccess (permalinks are broken in wordpress). I've googled this for about a week straight now, tried pretty much everything I could find and achieved nothing. The only thing that I think might actually be the cause of all this is this page: http:// - i.imgur.com/NYW3x.png (got shut down by the spam filter) So I figured if I set it to "default", this might magically start working again, but all it does is "crash" apache (all websites timeout). I figure it's something to do with the "mpm" module or something, but I can't find anything relevant in the settings to modify for it to work. Can someone please point me in the right direction? System info: Webmin version 1.580 Kernel and CPU Linux 2.6.35.4-rscloud on x86_64 Virtualmin version 3.90.gpl GPL Ubuntu 10.04 LTS (Lucid) A couple screenshots of top http://i.imgur.com/U2DTK.png http://i.imgur.com/sNPKs.png

  Read the article

• ICMP Redirect Theory VS. Application

  - by joeqwerty

  I'm trying to watch ICMP redirects in a lab using Cisco Packet Tracer (version 5.3.2) and I'm not seeing them, which leads me to believe that either my lab configuration isn't correct or my understanding of ICMP redirects isn't correct or that Packet Tracer doesn't support/use ICMP redirects. Here's what I believe to be true regarding ICMP redirects: Routers send ICMP redirects when all of these conditions are met: The interface on which the packet comes into the router is the same interface on which the packet gets routed out. The subnet or network of the source IP address is on the same subnet or network of the next-hop IP address of the routed packet. The datagram is not source-routed. The router kernel is configured to send redirects. I have the lab set up in Cisco Packet Tracer as displayed in the image and would expect to see an ICMP redirect from Router1 when pinging from PC1 to PC3. I'm not seeing the ICMP redirect and it looks like Router1 is actually routing all of the packets via Router2. I have IP ICMP debugging enabled on Router1 (and Router2) and I'm not seeing any ICMP redirect activity in either console. I'm also not seeing a route to the PC3 network in the routing table on PC1, which I think confirms that the ICMP redirect is not occurring. I'm using only static routing on Routers 1 and 2. Is my understanding of ICMP redirects incorrect, or is there a problem with my lab configuration or does Packet Tracer not support/use ICMP redirects?

  Read the article

• APC + FPM memory fragmentation without a reason

  - by palmic

  My setup @ debian 6-testing is: nginx 1.1.8 + php 5.3.8 + php-fpm + APC 3.1.9 Because i use automatic deployment with apc_clear_cache() after deploy, my target is to set up APC to cache all my project (up to 612 php files smaller than 1MB) without files changes checking. My confs: FPM: pm.max_children = 25 pm.start_servers = 4 pm.min_spare_servers = 2 pm.max_spare_servers = 10 pm.max_requests = 500 APC: pc.enabled="1" apc.shm_segments = 1 apc.shm_size="64M" apc.num_files_hint = 640 apc.user_entries_hint = 0 apc.ttl="7200" apc.user_ttl="7200" apc.gc_ttl="600" apc.cache_by_default="1" apc.filters = "apc\.php$,apc_clear.php$" apc.canonicalize="0" apc.slam_defense="1" apc.localcache="1" apc.localcache.size="512M" apc.mmap_file_mask="/tmp/apc-php5.XXXXXX" apc.enable_cli="0" apc.max_file_size = 2M apc.write_lock="1" apc.localcache = 1 apc.localcache.size = 512 apc.report_autofilter="0" apc.include_once_override="0" apc.coredump_unmap="0" apc.stat="0" apc.stat_ctime="0" The problem is i have my APC memory fragmented into 5 pieces at 14,5MB loaded into memory which capacity is 64M. My system memory is 640MB, used about 270MB at most. The http responses lasts about 300ms - 5s. When i switch on apc.stat="1", the responses are about 50ms - 80ms which is quite good, but i cannot understand why is apc.stat="0" so much whorse. The APC diagnostic tool shows "1 Segment(s) with 64.0 MBytes (mmap memory, pthread mutex Locks locking)" in general cache information window so i hope i am right that it's mmap setup which allows tweaking APC shm onto upper values than shows system limit in /proc/sys/kernel/shmmax (my shows 33MB).

  Read the article

• Is anyone using KVM in production?

  - by Andy Shellam

  I've been trying to set up a pair of servers utilising KVM on Ubuntu 9.10 to host 8 virtual machines between them and ended up with various issues from the VMs freezing, to not powering on. I had one virtual server set up and running and was setting up a second, when any operation involving OpenSSL would cause the VM to lock up in a weird way - all network traffic would cease, it wouldn't process logins on the console, but it wasn't taking any CPU time off the host. The first virtual server was identical and worked perfectly. Another VM I tried to setup had installed Ubuntu fine then refused to reboot, throwing kernel exceptions to do with XFS. I've now installed Citrix XenServer 5.5 on both hosts, and am now setting up my third VM with absolutely no issues. I also had the same experience when I tried VMware, but I preferred Xen as it appears to give more features on the free license. My question is am I just unlucky with KVM, or is KVM as unstable as it appears? Are you using, or planning on using, KVM in production, and how successful have you been?

  Read the article

• Understanding Linux SCSI queue depths

  - by Troels Arvin

  I'm experimenting with the effects of different SCSI queue depth values on a Dell server running CentOS Linux 5.4 (x86_64). The server has two QLogic QLE2560 FC HBAs connected via multipathing to a storage system. The storage system has allocated two LUNs to the server, each connected through four paths in an active-active-active-active round-robin configuration. All in all, the two LUNs exist as eight /dev/sdX devices, represented by two devices in /dev/mpath. I currently adjust the queue depth values in /etc/modprobe.conf and check the result (after rebooting) by looking in the seventh column of /proc/scsi/sg/devices. Two questions related to that: Is there a way to adjust queue depths without rebooting or unloading the qla2xxx kernel module? E.g., can I echo a new queue depth value into some /proc or /sys-like file to update the queue depth? If I set the queue depth to 128, is that 128 in total for all devices handled by the qla2xxx module?, or 128 for each HBA? (256 in total), or 128 for each of the eight /dev/sdX devices (1024 in toal)?, or 128 for each of the two /dev/mpath/... devices (256 in total)? This is important for me to know so that my server doesn't flood the storage system, affecting other servers connected to it.

  Read the article

• X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

  - by Marcelo Santos

  After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

  Read the article

• How to permanently "renice" a process on Mac OS X (or iOS, etc)?

  - by mralexgray

  I use a nice (free) process manager called ATMonitor for Mac OS X that has a lot of cool hidden features... one of which is being able to click on a running process.. and set the "renice" from +20 (less priority) to -20 (highest priority). The best part.... it sticks between restarts... SO you want XYZ to get full attention all the time.. you set it once and it's done... I want to do the same thing (renice a process) on an iPad running a particular daemon.. and I don't know how to set a renice permanently. I can do it once, and it works fine... But the setting is lost on a reboot. I read somewhere.. Now, as for permanently resetting the priority of a process, this can't be done directly. You can fake it, however, with a shell script that starts the app and then immediately renice's it. Give that script a ".command" extension and it will be double-clickable in the GUI. Not very elegant, but it gets the job done. But as it says.. not very elegant, and I dont think this is how ATMonitor does it.... I found this thread.... http://superuser.com and they gave a way to do it as a launch argument, but no apparent way to save it as a persistent value... for instance - if the program wasn't going to be started by launchd... How do I set a permanent renice level, per executable binary, independent of it's PID, when, how or why it was launched?

  Read the article

• PECL install error after upgrading to OSX 10.8

  - by Clive

  I've just upgraded my OS to Mountain Lion and PECL is no longer working (it's on a test drive so no drama, but I'd like to get it working so I can upgrade the OS on my shiny new SSD as well). I'm using the native PHP installation, no macports/homebrew or anything like that. Running sudo pecl install uploadprogress (for example) produces the following terminal output: downloading uploadprogress-1.0.3.1.tgz ... Starting to download uploadprogress-1.0.3.1.tgz (9,040 bytes) .....done: 9,040 bytes 4 source files, building running: phpize grep: /usr/include/php/main/php.h: No such file or directory grep: /usr/include/php/Zend/zend_modules.h: No such file or directory grep: /usr/include/php/Zend/zend_extensions.h: No such file or directory Configuring for: PHP Api Version: Zend Module Api No: Zend Extension Api No: autom4te: need GNU m4 1.4 or later: /usr/bin/m4 ERROR: `phpize' failed I'm guessing the problem is the 3 grep lines. I've found several threads that suggest this is caused by XCode not being installed...but XCode is installed, and updated to the latest version (4.4). All the relevant symlinks to /Developer/usr/bin/* also exist as they should. m4 is currently at version: m4 (GNU M4) 1.4.13, so even though the output above contains a line pertaining to it, I don't think that can be the problem. I'm sure it's just a simple issue, anyone got any clues?

  Read the article

• SATA drives or chipset throwing DRDY ERR and ICRC ABRT

  - by Matt

  I have an SD-VIA-1A2S PCI card with 2 sata ports (and one ATA-133 that isn't used). Two new Western Digital Caviar Green drives (WD10EARS 1TB) throw repeated errors in kern.log (removed date/time/host info for brevity): [ 7.376475] ata2.00: exception Emask 0x12 SAct 0x0 SErr 0x1000500 action 0x6 [ 7.376480] ata2.00: BMDMA stat 0x5 [ 7.376483] ata2: SError: { UnrecovData Proto TrStaTrns } [ 7.376489] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 7.376490] res 51/84:2f:20:00:00/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) [ 7.376493] ata2.00: status: { DRDY ERR } [ 7.376495] ata2.00: error: { ICRC ABRT } [ 7.376504] ata2: hard resetting link I'm using Ubuntu 9.04 - 2.6.28-18-generic, though I have tried live cds of Ubuntu 9.10, Fedora 12 and OpenSUSE 11.2 - all running various 2.6.31 kernels - and all received the same error. Based on testing these drives and this card in two other machines and combos of connecting the drives directly to the motherboard or the add-in card, I'm relatively convinced that it's the VIA chipset that is the problem. Another computer that also has an onboard VIA SATA chipset (like the add-in card) produces the same errors when the drives are directly on that motherboard. I have been able to verify that the drives are perfectly good, and I tried everything I can think of in terms of swapping cables, psu isn't overloaded, etc. The error happens on boot once or twice, after using fdisk on the drive once or twice, and constantly when attempting to sync a new mdadm raid 1 array created on the two drives. Any thoughts on where to go from here - driver/kernel wise? I'm completely open to buying a new PCI add-in card if someone can recommend one with 2 internal sata ports that works well in Debian/Ubuntu. Thanks!

  Read the article

• How to run some commands after booting from ArchLinux disk? Or how to change some settings in .iso before booting?

  - by Alexander Ovchinnikov

  How to install Arch Linux with traditional installer with only ssh-access to server? There is nice guide: https://wiki.archlinux.org/index.php/Install_from_SSH I try test this on my home vps: Start VPS with any linux bootable cd and login to remote server (vps) wget http://mirrors.kernel.org/archlinux/iso/latest/archlinux-2010.05-netinstall-x86_64.iso dd if=archlinux-2010.05-netinstall-x86_64.iso of=/dev/sda reboot ... I see, it works but without ssh connection... I need make script, which will send this commands after reboot: aif -p partial-configure-network (and write some information about my server ip etc.) /etc/rc.d/sshd start (need to start sshd) echo "sshd: ALL" /etc/hosts.allow (to allow me login to server, by default deny all) passwd (by default its empty, can't login via ssh with empty password) Can I edit .iso or may be /dev/sda? May be I need write script, which will start after system boot and do this things or may be I can set this settings by default and system will start with correct settings (i think its possible at least in 2. and 3.). Thank you!

  Read the article

• How to get decent WiFi despite a virtual Faraday cage

  - by MT_Head

  One of my clients is the local branch of an international airline. They have a small office in the secured area behind the ticket counters, and timeshare space at the ticket counter. I need to add a ticket printer out front, which I cannot (for contract/liability reasons) attach to the shared computer at the counter; the only workable solution seems to be to put the printer and its attached computer on a cart and connect to the office's network via WiFi. So far, no problem - right? Well, the terminal has been getting a facelift, which - among other things - includes decorative stainless-steel panels along the wall behind the ticket counters. This paneling acts as a seriously effective barrier to WiFi! The office's WiFi router - a brand-new D-Link DIR-815, dual-band 802.11n - is just on the other side of the pictured wall, and twenty feet or so to the right. And yet the only way I can connect AT ALL on this side of the wall is to stick the USB adapter (on the end of an extension cable) right into the crack between panels... and even then I can only see the 5GHz network, and that very weakly. Has anyone else had experience with this sort of misguided interior decoration? Any ideas on how I can improve reception on the other side of the barrier? (Needless to say, physical modifications of the environment - tempting though they might be - are strictly no-go.)

  Read the article

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >