Search Results

Search found 31973 results on 1279 pages for 'network library'.

Page 319/1279 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >

  • Ok it has been pointed out to me

    - by Ratman21
    That it seems my blog is more of poor me or pity me or I deserve a job blog.   Hmmm I wont say, I have not wined here as I have used this blog to vent my frustration on the whole out of work thing (lack of money, self worth, family issues and the never end bills coming my way) but, it was also me trying to reach to others in the same boat as well as advertising, hay I am out here, employers.   It was also said, that I don’t have any thing listed here on me, like a cover letter or resume. Well there is but, it was so many months and post ago. Also what I had posted is not current. So here is my most current cover and resume.   Scott L Newman 45219 Dutton Way Callahan, Fl. 32011 To Whom It May Concern: I am really interested in the IT vacancie that you have listed for your company. Maybe I don’t have all the qualifications you want (hold on don’t hit delete yet) yet! But maybe I do, as I have over 20 + years experience in "IT” RIGHT NOW.   Read the rest of my cover and my resume. You will see what my “IT” skills are and it will Show that I can to this work! I can bring to your company along with my, can do attitude, a broad range of skills, including: Certified CompTIA A+, Security+  and Network+ Technician §         2.5 years (NOC) Network experience on large Cisco based Wan – UK to Austria §         20 years experience MIS/DP – Yes I can do IBM mainframes and Tandem  non-stops too §         18 years experience as technical Help Desk support – panicking users, no problem §         18 years experience with PC/Server based system, intranet and internet systems §         10+ years experienced on: Microsoft Office, Windows XP and Data Network Fundamentals (YES I do windows) §         Strong trouble shooting skills for software, hard ware and circuit issues (and I can tell you what kind of horrors I had to face on all of them). §         Very experienced on working with customers on problems – again panicking users, no problem §         Working experience with Remote Access (VPN/SecurID) – I didn’t just study them I worked on/with them §         Skilled in getting info for and creating documentation for Operation procedures (I don’t just wait for them to give it to me I go out and get it. Waiting for info on working applications is, well dumb) Multiple software languages (Hey I have done some programming) And much more experiences in “IT” (Mortgage, stocks and financial information systems experience and have worked “IT” in a hospital) Can multitask, also have ability to adapt to change and learn quickly. (once was put in charge of a system that I had not worked with for over two years. Talk about having to relearn and adapt to changes but, I did it.) I would welcome the opportunity to further discuss this position with you. If you have questions or would like to schedule an interview, please contact me by phone at 904-879-4880 or on my cell 352-356-0945 or by e-mail at [email protected] or leave a message on my web site (http://beingscottnewman.webs.com/). I have enclosed/attached my resume for your review and I look forward to hearing from you.   Thank you for taking a moment to consider my cover letter and resume. I appreciate how busy you are. Sincerely, Scott L. Newman    Scott L. Newman 45219 Dutton Way, Callahan, FL 32011? H (904)879-4880 C (352)356-0945 ? [email protected] Web - http://beingscottnewman.webs.com/                                                       ______                                                                                       OBJECTIVE To obtain a Network Operation or Helpdesk position.     PROFILE Information Technology Professional with 20+ years of experience. Volunteer website creator and back-up sound technician at True Faith Christian Fellowship. CompTIA A+, Network+ and Security+ Certified.   TECHNICAL AND PROFESSIONAL SKILLS   §         Technical Support §         Frame Relay §         Microsoft Office Suite §         Inventory Management §         ISDN §         Windows NT/98/XP §         Client/Vendor Relations §         CICS §         Cisco Routers/Switches §         Networking/Administration §         RPG §         Helpdesk §         Website Design/Dev./Management §         Assembler §         Visio §         Programming §         COBOL IV §               EDUCATION ? New HorizonsComputerLearningCenter, Jacksonville, Florida – CompTIA A+, Security+ and Network+ Certified.             Currently working on CCNA Certification ?MottCommunity College, Flint, Michigan – Associates Degree - Data Processing and General Education ? Currently studying Japanese     PROFESSIONAL             TrueFaithChristianFellowshipChurch – Callahan, FL, October 2009 – Present Web site Tech ·        Web site Creator/tech, back up song leader and back up sound technician. Note church web site is (http://ambassadorsforjesuschrist.webs.com/) U.S. Census (temp employee) Feb. 23 to March 8, 2010 ·        Enumerator for NassauCounty   ThomasCreekBaptistChurch – Callahan, FL,     June 2008 – September 2009 Churchsound and video technician      ·        sound and video technician           Fidelity National Information Services ? Jacksonville, FL ? February 01, 2005 to October 28, 2008 Client Server Dev/Analyst I ·        Monitored Multiple Debit Card sites, Check Authorization customers and the Card Auth system (AuthNet) for problems with the sites, connections, servers (on our LAN) and/or applications ·        Night (NOC) Network operator for a large Wide Area Network (WAN) ·        Monitored Multiple Check Authorization customers for problems with circuits, routers and applications ·        Resolved circuit and/or router issues or assist circuit carrier in resolving issue ·        Resolved application problems or assist application support in resolution ·        Liaison between customer and application support ·        Maintained and updated the NetOps Operation procedures Guide ·        Kept the listing of equipment on the raised floor updated ·        Involved in the training of all Night Check and Card server operation operators ·        FNIS acquired Certegy in 2005. Was one of 3 kept on.   Certegy ? St.Pete, FL ? August 31, 2003 to February 1, 2005 Senior NetOps Operator(FNIS acquired Certegy in 2005 all of above jobs/skills were same as listed in FNIS) ·        Converting Documentation to Adobe format ·        Sole trainer of day/night shift System Management Center operators (SMC) ·        Equifax spun off Card/Check Dept. as Certegy. Certegy terminated contract with EDS. One of six in the whole IT dept that was kept on.   EDS  (Certegy Account) ? St.Pete, FL ? July 1, 1999 to August 31, 2003 Senior NetOps Operator ·        Equifax outsourced the NetOps dept. to EDS in 1999. ·        Same job skills as listed above for FNIS.   Equifax ? St.Pete&Tampa, FL ? January 1, 1991 to July 1, 1999 NetOps/Tandem Operator ·        All of the above for FNIS, except for circuit and router issues ·        Operated, monitored and trouble shot Tandem mainframe and servers on LAN ·        Supported in the operation of the Print, Tape and Microfiche rooms ·        Equifax acquired TelaCredit in 1991.   TelaCredit ? Tampa, FL ? June 28, 1989 to January 1, 1991 Tandem Operator ·        Operated and monitored Tandem Non-stop systems for Card and Check Auths ·        Operated multiple high-speed Laser printers and Microfiche printers ·        Mounted, filed and maintained 18 reel-to-reel mainframe tape drives, cartridges tape drives and tape library.

    Read the article

  • HP Pavilion tx2000 - Wifi adapter no longer works after moving from 12.04 to a 12.10 clean install

    - by Marek L.
    I have a HP Pavilion tx2000 that I have been running Ubuntu 12.04 on for a couple of months without any problems (wifi worked great) until yesterday when my hard drive failed. I replaced the hard drive and decided to install Ubuntu 12.10. Unlike 12.04, the wifi did not work after the installation finished and all the updates where installed (over Ethernet). The network drop down in the top right didn't even show a wireless option. I Googled about for a bit and found some solutions that seemed like they might work. Unfortunately they did not. Here is what I tried: sudo apt-get remove bcmwl-kernel-source sudo apt-get install b43-fwcutter sudo apt-get install firmware-b43-lpphy-installer Restart the computer. And the wifi still didn't work. At which point I panicked a bit and tried to undo the previous commands by running: sudo apt-get remove b43-fwcutter firmware-b43-lpphy-installer sudo apt-get install bcmwl-kernel-source Restart the computer. The wifi still doesn't work. This is where I stopped because I have no idea what I am doing and don't want to mess something up. The network drop down still doesn't show a wireless option and the hardware wifi switch on the laptop is amber (it turns blue when the wifi is on). Using the hardware switch does not change the color. Output from: sudo lspci ... 08:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01) ... Output from: sudo lshw -class network *-network UNCLAIMED description: Network controller product: BCM4322 802.11a/b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1100000-d1103fff ... Output from: sudo rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes UPDATE: After writing up this question tried the following command: sudo rfkill unblock all At first it didn't do anything but after running it about four times, sudo rfkill list all now returns: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no But the network menu still does not have a wireless option and the hardware switch still glows amber. Pushing the hardware switch turns the hard block back on and I have to run sudo rfkill unblock all multiple times again to turn it off. Any help is appreciated! Update 2: Full output from sudo lspci -nn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a) 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304] 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)

    Read the article

  • Partner Webcasts: EMEA Alliances & Channels Hardware Webinars, July 2012

    - by swalker
    Dear partner Oracle is pleased to invite you to the following webcasts dedicated to our EMEA partner community and designed to provide you with important news on our SPARC and Storage product portfolios. Please ensure you don't miss these unique learning opportunities! 1. How to Make Money Selling SPARC! TOMORROW: 3PM CET (2pm UKT), Tuesday, July 10, 2012 The webcast will be hosted by - Rob Ludeman, from SPARC Product Management Agenda: To bring our partners timely, valuable information, focused on increase in their success during selling SPARC systems. The webcast will be focused and targeted on specific topics and will last approximately in 30 minutes.You can submit your questions via WebEx chat and there will be a live Q&A session at the end of the webcast. REGISTER 2. Introduction to Oracle’s New StorageTek SL150 Modular Tape Library 3pm CET (2pm UK), Thursday, July 12, 2012 This webcast will help you to understand Oracle's New StorageTek SL150 Modular tape library which is the first scalable tape library designed for small and midsized companies that are experiencing high growth. Built from Oracle software and StorageTek library technology, it delivers a cost-effective combination of ease of use and scalability, resulting in overall TCO savings. During the webcast Cindy McCurley, from Tape Product Management will introduce you to the latest addition to the Oracle Tape Storage product portfolio, the SL150 Modular Tape Library. This 60 minutes webcast will cover the product’s features, positioning, unique selling points and a competitive overview on StorageTek. You can submit your questions via WebEx chat and there will be a live Q&A session at the end of the webcast. REGISTER Delivery Format This FREE online LIVE eSeminar will be delivered over the Web and Conference Call. Note: Please join the call 10 minutes before the scheduled start time. We look forward to your participation. Best regards, Giuseppe Facchetti EMEA Partner Business Development Manager, Oracle Hardware Sales Sasan Moaveni EMEA Storage Sales Manager, Oracle Hardware Sales

    Read the article

  • Multicasting and multicast address

    - by Zia ur Rahman
    I have confusion about the multicast addresses, I have read an example which is given by. Suppose two applications have been built to send audio over a network. One application accepts and digitizes an audio input stream, and then sends the resulting frame across the network to other application. The second application receives the digitized audio from the network, converts it back to the audio signal and plays the result over a speaker. Unless the two applications use broadcast to send frames, no other computers on the network will receive a copy of the frame. Multicasting provides an excellent solution to the problems of allowing some computers to participate in audio transmission. To use multicasting , a multicast address must be chosen for the audio application. And the receiving application passes the multicast address to the network interface. The interface begins to accept the packets sent to that address. Question: how this multicast address is chosen, how the receiving application knows that the sender using this specific destination address for the audio frames.

    Read the article

  • Frequent Disconnects with an Intel 3945ABG Wireless Card

    - by Alex Forsythe
    I'm brand new to Ubuntu, and I really love it so far, but one issue I have encountered is that my WLAN is disconnecting about every 5-10 minutes. Often times the connection is repaired automatically, but sometimes the network manager will repeatedly reject my encryption key (which of course is correct). Occasionally after a disconnect, the wireless network fails to show up at all. The only way I can solve this seems to be by completely restarting Ubuntu or connecting with a USB wireless adapter. I am using WPA/WPA2 encryption, which I've read can cause problems with network-manager, but I experience the exact same issues with WICD. I should probably note that I've not experienced any of these issues using Windows 7 on my other partition. I have a hunch that there may be a better driver out there for my card, but I have no idea how to go about searching for it or installing it. Any help would be really appreciated! lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric lspci -nnk 09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02) Subsystem: Dell Device [1028:0201] Kernel driver in use: tg3 Kernel modules: tg3 0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Device [8086:1020] Kernel driver in use: iwl3945 Kernel modules: iwl3945 rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no

    Read the article

  • KVM Guest not reachable from host

    - by Paul
    Hello, I'm running Ubuntu server 9.10, installed KVM etc. Created the bridge network following instructions on help.ubuntu.com/community/KVM/Networking Created a windows 2008 guest using virt-install command line (using virt-manager GUI from a remote Ubuntu desktop would not let me select the ISO location). I can however use a remote virt-manager to connect to the guest and complete the windows install. Within windows 2008 I changed the IP address but cannot ping from outside world. The bridge network appears fine - I'm not sure what else to look at! Here is the interfaces file: The loopback network interface auto lo iface lo inet loopback The primary network interface auto eth0 iface eth0 inet manual # auto br0 iface br0 inet static address 60.234.64.50 netmask 255.255.255.248 network 60.234.0.0 broadcast 60.234.0.255 gateway 60.234.64.49 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth1 iface eth1 inet static address 192.168.12.2 netmask 255.255.255.0 broadcast 192.168.12.255 The ip of the windows server is 60.234.64.52 What else should I check? Regards Paul.

    Read the article

  • Hardware wireless switch has no effect after suspend and 13.10 upgrade

    - by blaineh
    This seems to be a fairly chronic problem, as shown by the following questions: How do I fix a "Wireless is disabled by hardware switch" error? Wireless disabled by hardware switch "Wireless disabled by hardware switch" after suspend and other hardware buttons ineffective - how can I solve this? but no good solutions have been found! Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. All My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A ip=155.99.215.79 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. xev shows that no internal event is triggered for my wireless switch (f12), but other function keys also acting as hardware switches work fine. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. I just tried to reload bios defaults (or something) as shown by this video. Didn't work. Edit. I tried the contents of this answer, and it didn't work. Edit. I made a pastebin of dmesg. I couldn't even begin to understand the contents. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

    Read the article

  • How to make a DHCP server on virtual machine serves other virtual machines(on different physical machines)?

    - by Tony
    I'm building a virtual cluster with VirtualBox and Opensuse. I have 10 physical machines and need several vms on each. The virtual machines are supposed to be in a "private" network, but still have internet access. I was asked to set up a virtual head node working as DHCP server. I installed DHCP server on the virtual head node and it seems works. On VirtualBox I set 2 network adapters to the head node, one bridged adapter and one internal network. One vm on the same physical machine has been set nic as internal network adapter. The vm can get IP address (so DHCP works) but can't access internet. What should I do? Specifically, what network adapter should I choose for head-node and work-nodes in VirtualBox? What in the virtual machines should I do?

    Read the article

  • Setup dhcpd without gateway on purpose

    - by MBober
    I have an XP machine with two network interfaces. One is connected to my company's network (and the Internet). The other is a very local network which connects some hardware with my PC. Both the hardware and my XP machine's second network interface obtain configuration from a dhcpd running on Ubuntu in a virtual machine on my XP machine. I entered some dummy gateway in /etc/dhcp3/dhcpd.conf like 192.168.3.1 which does not match any existing device just to get dhcpd started. The problem is that my XP machine now tries to route Internet traffic through 192.168.3.1 in most of the cases which, of course, results in an error. Is there any way to set up dhcpd in a way that the clients know that there is no gateway in this network? By the way: setting the gateway manually in XP is off the table because this needs administrator privileges which I don't have.

    Read the article

  • ralink rt2860 not working anymore in ubuntu 12.10

    - by greenit
    I just upgraded from Ubuntu 12.04 to 12.10, however, my network card is not working anymore... When i had 12.04 installed, i just had to download the driver from Ralink, go to the directory and enter these commands: $ make $ sudo make install and the network card worked... now, when I want to do this in ubuntu 12.10, it seems like it works, but it doesn't. I can enable the module, it recognizes the network card, but i am unable to connect to any wireless network... How can i get my wireless card working again? If any1 knows a solution, please tell it to me, thx in advance

    Read the article

  • Unable to Upgrade from 13.04 to 13.10

    - by Mohit
    Following is what I get as error Error during update A problem occurred during the update. This is usually some sort of network problem, please check your network connection and retry. W:Failed to fetch http://bg.archive.ubuntu.com/ubuntu/dists/natty-backports/main/source/Sources 404 Not Found , W:Failed to fetch http://bg.archive.ubuntu.com/ubuntu/dists/natty-backports/restricted/source/Sources 404 Not Found , W:Failed to fetch http://bg.archive.ubuntu.com/ubuntu/dists/natty-backports/universe/source/Sources 404 Not Found , W:Failed to fetch http://bg.archive.ubuntu.com/ubuntu/dists/natty-backports/multiverse/source/Sources 404 Not Found , E:Some index files failed to download. They have been ignored, or old ones used instead. Restoring original system state I am using command line "do-release-upgrade" I have changed my dns to google public dns and verified that using nslookup and host -v could not find bg.archive.ubuntu.com in any of the source list files. not only in that in another tab I have ping google running just to verify that network is not down. Network has no issues.

    Read the article

  • Securing Mobile Apps in a Bring Your Own Device World

    - by Naresh Persaud
    As more and more business users begin using their personal devices to access corporate information and resources, the number of network access requests has risen dramatically.  Access Management products and strategies that were based on an employee accessing network resources from a single desktop PC were never designed to monitor and manage an employee that is using a desktop and a laptop, a tablet, and a smartphone all from outside the corporate network, and possibly from an unsecured wireless public network. A new approach is needed to manage the types and frequency of mobile app access requests - an integrated Platform Approach to Identity and Access Management that is location and device aware, that can warn you of unusual or high risk access.  A platform that provides standard APIs so you can manage your mobile apps the same way that you manage your enterprise apps. View the slideshow below to see how the Oracle Identity Management platform can help you secure your mobile applications and data in a Bring Your Own Device World. Securing access inabyod-world-final-ext View more PowerPoint from OracleIDM

    Read the article

  • Slow gvfs Samba Performance

    - by Wolfgang
    if I use/acces a Samba Share using Nautilus or manually using "gvfs-mount smb://SERVER-IP/Share" I get a poor Performance, only about 7 mb/s on my 100 Mbit Network. If I access the same Share on Windows I get Fullspeed 100 Mbit (About 11 mb/s), also if I mount using sudo mount -t cifs //SERVER-IP/Share /mountpount which uses cifs instead of gvfs I get fullspeed too, so can anyone tell me if there is a Performance Problem/Bug in gvfs or how gvfs is using SMB Shares differerently ? I tested read Perfomance (From my Network Samba Share) with multiples files and always, the cifs-Version is fullspeed and the GVFS-Version has some mb/s less. After some research I found some tips to optimize the Samba Settings of my Ubuntu Installation and some network tuning tips, but as the CIFS mounted share gets the full Network Speed I don't believe its that kind of problem.

    Read the article

  • No internet access when I'm connect to my company's VPN

    - by Iago
    I googled my problem and I've read some questions in Ask Ubuntu, but I didn't solve my problem. I connect to a PPTP VPN server and it works well, but when I'm connected to that VPN I don't have Internet access but private network access. If I check "Use this connection only for resources on its network", I have Internet access, but this way I haven't access to my company's private network. What's the problem? Help, please.

    Read the article

  • Where should libraries be placed, in windows?

    - by Gabriel Diaconescu
    I have just moved from Linux to Windows, and I have to use the Zend Framework library. Where should the library be placed? Directly on C drive Create a lib folder like C:/lib/ Create a lib folder in my user folder I am wondering if there is a classic folder where these kind of libraries are placed. Update:I am asking about the location on my own standpoint. The Zend Framework library is a PHP framework.

    Read the article

  • not detecting wireless networks

    - by pac
    i'm a new linux user and i cannot add or edit any network connections, nor is the system detecting any wireless networks when i try to access additional hardware from system, it doesn't even open...so i'm stuck. lspci | grep -i wireless comes out with 06:0a.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network connection (rev 05) lspci -n -s 06:0a.0 comes out with 8086:4220. i dont know if that info was relevant but any help on this would be appreciated.

    Read the article

  • Dell Dimension running Fedora12 does a "Sleeping Beauty" and I am not am not a "handsome prince"!

    - by Jim Dobbs
    Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

    Read the article

  • Questions about linking libraries in C

    - by james
    I am learning C (still very much a beginner) on Linux using the GCC compiler. I have noticed that some libraries, such as the library used with the math.h header, need to be linked in manually when included. I have been linking in the libraries using various flags of the form -l[library-name], such as -lm for the above-mentioned math library. However, after switching from the command line and/or Geany to Code::Blocks, I noticed that Code::Blocks uses g++ to compile the programs instead of the gcc that I am used to (even though the project is definitely specified as C). Also, Code::Blocks does not require the libraries to be manually linked in when compiling - libraries such as the math library just work. I have two questions: Firstly, is it "bad" to compile C programs with the g++ compiler? So far it seems to work, but after all, C++ is not C and I am quite sure that the g++ compiler is meant for C++. Secondly, is it the g++ compiler that is doing the automatic linking of the libraries in Code::Blocks?

    Read the article

  • LGPL License in commercial application

    - by Jacob
    I have searched around but I don't seem to be able to get a clear answer on my questions that I understand. I want to use the Xuggler library in my application, which is licensed either GPL or LGPL depending on whether I compile it myself. I don't intend to edit the library If I compile it myself and thus get a LGPL version of the library, can I use it in a commercial application without having to distribute the source code of my application? Furthermore, do I have to give my application the LGPL license as well? What other problems might using this library give me?

    Read the article

  • Oracle Solaris Remote Lab (OSRL) Fact Sheet

    - by user13333379
    The Oracle Solaris Remote Lab allows independent software vendors (ISVs) to test and qualify their applications in a self service Solaris cloud. ISVs who are Oracle Partner Network Gold members with a specialization in the Solaris knowledge zone can apply for free access in OPN. The lab offers the following features to it's users: Lifetime of project: 45 days (extensions granted on demand)  Up to 5 virtual machines in a private network  Virtual Machine technology: Solaris zones  Resources per VM processor support: SPARC or x86  OS version: OracleSolaris 11.0 4GB physical memory  4GB swap space  10GB local filesystem storage  10GB network filesystem (NFS) mounted on all virtual machines Networking configuration The only external network routes are to Partner's other Virtual Machines  No network routing to the Internet  The SMB (CIFS) sharing protocol is not available between Virtual Machines  Device Access  Applications that assume the existence of /devices will not run in a Virtual Machine  Applications that use eeprom to modify SPARC eeprom setting will not run in a Virtual Machine The following utilities do not work properly in Virtual Machines:  add_drv, disks, prtconf, prtdiag, rem_dev Access technology: Secure Global Desktop, file up and download root access within VM Available VM templates (both processor architectures) Oracle Database 11g Release 2 (11.2.0.3) for Solaris with Oracle Enterprise Manager 11g Weblogic 12c  SAMP: Apache http server, PHP, MySQL, phpadmin on all templates and images: Oracle Solaris Studio 12.3 for application development  More resources: Online application for Oracle Solaris remote Lab Developer Webinar about the Oracle Solaris Remote Lab Everything an Oracle Solaris Developer needs...

    Read the article

  • Oracle Solaris Remote Lab (OSRL) Fact Sheet

    - by user13333379
    The Oracle Solaris Remote Lab allows independent software vendors (ISVs) to test and qualify their applications in a self service Solaris cloud. ISVs who are Oracle Partner Network Gold members with a specialization in the Solaris knowledge zone can apply for free access in OPN. The lab offers the following features to it's users: Lifetime of project: 45 days (extensions granted on demand)  Up to 5 virtual machines in a private network  Virtual Machine technology: Solaris zones  Resources per VM processor support: SPARC or x86  OS version: OracleSolaris 11.0 4GB physical memory  4GB swap space  10GB local filesystem storage  10GB network filesystem (NFS) mounted on all virtual machines Networking configuration The only external network routes are to Partner's other Virtual Machines  No network routing to the Internet  The SMB (CIFS) sharing protocol is not available between Virtual Machines  Device Access  Applications that assume the existence of /devices will not run in a Virtual Machine  Applications that use eeprom to modify SPARC eeprom setting will not run in a Virtual Machine The following utilities do not work properly in Virtual Machines:  add_drv, disks, prtconf, prtdiag, rem_dev Access technology: Secure Global Desktop, file up and download root access within VM Available VM templates (both processor architectures) Oracle Database 11g Release 2 (11.2.0.3) for Solaris with Oracle Enterprise Manager 11g Weblogic 12c  SAMP: Apache http server, PHP, MySQL, phpadmin on all templates and images: Oracle Solaris Studio 12.3 for application development  More resources: Online application for Oracle Solaris remote Lab Developer Webinar about the Oracle Solaris Remote Lab Everything an Oracle Solaris Developer needs...

    Read the article

  • Can't connect to or see my wifi ssid

    - by ant
    Today I installed ubuntu 12.04 on my laptop. I am unable to see my home SSID or even connect to it. I've tried to connect as a hidden SSID but I always get prompted for authorization although my key is correct. I'm in in Europe but my laptop is from US. I'm not sure if that is relevant. I've read around this site and saw something that has to do with setting the channel above 11. I'm not sure I did that correctly I did this : How to use Wi-Fi channels above 11? Did't help. I'm able to connect with cable but not via wifi either windows or linux. Other devices in my home can connect without any issues, even the kindle. Here is the screenshot from my router : Here is some additional info : lspci | grep -i network 08:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) lspci -nnk | grep -A2 0280 08:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Hewlett-Packard Company U98Z062.10 802.11bgn Wireless Half-size Mini PCIe Card [103c:303f] Kernel driver in use: ath9k m-tool NetworkManager Tool State: connected (global) Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: disconnected Default: no HW Address: 90:4C:E5:38:79:0D Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes I'm not sure what to do next. Any suggestions?

    Read the article

  • Distinguishing between UI command & domain commands

    - by SonOfPirate
    I am building a WPF client application using the MVVM pattern that provides an interface on top of an existing set of business logic residing in a library which is shared with other applications. The business library followed a domain-driven architecture using CQRS to separate the read and write models (no event sourcing). The combination of technologies and patterns has brought up an interesting conundrum: The MVVM pattern uses the command pattern for handling user-interaction with the view models. .NET provides an ICommand interface which is implemented by most MVVM frameworks, like MVVM Light's RelayCommand and Prism's DelegateCommand. For example, the view model would expose a number of command objects as properties that are bound to the UI and respond when the user performs actions like clicking buttons. Many implementations of the CQRS use the command pattern to isolate and encapsulate individual behaviors. In my business library, we have implemented the write model as command / command-handler pairs. As such, when we want to do some work, such as create a new order, we 'issue' a command (CreateOrderCommand) which is routed to the command-handler responsible for executing the command. This is great, clearly explained in many sources and I am good with it. However, take this scenario: I have a ToolbarViewModel which exposes a CreateNewOrderCommand property. This ICommand object is bound to a button in the UI. When clicked, the UI command creates and issues a new CreateOrderCommand object to the domain which is handled by the CreateOrderCommandHandler. This is difficult to explain to other developers and I am finding myself getting tongue-tied because everything is a command. I'm sure I'm not the first developer to have patterns overlap like this where the naming/terminology also overlap. How have you approached distinguishing your commands used in the UI from those used in the domain? (Edit: I should mention that the business library is UI-agnostic, i.e. no UI technology-specific code exists, or will exists, in this library.)

    Read the article

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >