Search Results

Search found 27336 results on 1094 pages for 'network state'.

Page 320/1094 | < Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >

• How to Load Balance 2 Internet Connections on a Windows 7 machine?

  - by Jimmy Chandra

  It's sort of related to this particular question, but that one is on Mac. I am looking for similar solution on Windows 7. I have 2 network connections: (Connection A) Wireless terminal connecting to ISP A (3G / EVDO internet provider) (Connection B) Broadband wired connection connecting to ISP B (Cable internet provider) Both has access to the internet. When I try connecting to a website and checking the networking tab on my Task Manager, I only see the network traffic being routed to only Connection A. Is there a way to make the computer to utilize both network (in a sense using all the bandwidth available from both the Cable ISP and the 3G / EVDO ISP) at the same time? If so, what do I need to do to set this up ... on Windows 7? Here is a bit more info on my network connections (ipconfig /all): PPP adapter Wireless Terminal: IPv4: aa.bb.ccc.ddd(preferred) Subnet mask: 255.255.255.255 Default Gateway: 0.0.0.0 DNS: aa.ee.f.ggg aa.ee.f.hhh Primary Wins: jjj.ii.k.l Secondary Wins: jjj.ii.k.m Ethernet adapter LAN: IPv4: 192.168.1.100 (connected to a router by wired that itself connect to a cable modem) subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 (the wireless router) DHCP: 192.168.1.1 (the wireless router) DNS: xxx.yy.zz.ww rr.sss.t.uuu For my own privacy, I don't believe the actual number matters, the patterns are representative of the ip numbering scheme...

  Read the article

• Can a pool of memcache daemons be used to share sessions more efficiently?

  - by Tom

  We are moving from a 1 webserver setup to a two webserver setup and I need to start sharing PHP sessions between the two load balanced machines. We already have memcached installed (and started) and so I was pleasantly surprized that I could accomplish sharing sessions between the new servers by changing only 3 lines in the php.ini file (the session.save_handler and session.save_path): I replaced: session.save_handler = files with: session.save_handler = memcache Then on the master webserver I set the session.save_path to point to localhost: session.save_path="tcp://localhost:11211" and on the slave webserver I set the session.save_path to point to the master: session.save_path="tcp://192.168.0.1:11211" Job done, I tested it and it works. But... Obviously using memcache means the sessions are in RAM and will be lost if a machine is rebooted or the memcache daemon crashes - I'm a little concerned by this but I am a bit more worried about the network traffic between the two webservers (especially as we scale up) because whenever someone is load balanced to the slave webserver their sessions will be fetched across the network from the master webserver. I was wondering if I could define two save_paths so the machines look in their own session storage before using the network. For example: Master: session.save_path="tcp://localhost:11211, tcp://192.168.0.2:11211" Slave: session.save_path="tcp://localhost:11211, tcp://192.168.0.1:11211" Would this successfully share sessions across the servers AND help performance? i.e save network traffic 50% of the time. Or is this technique only for failovers (e.g. when one memcache daemon is unreachable)? Note: I'm not really asking specifically about memcache replication - more about whether the PHP memcache client can peak inside each memcache daemon in a pool, return a session if it finds one and only create a new session if it doesn't find one in all the stores. As I'm writing this I'm thinking I'm asking a bit much from PHP, lol... Assume: no sticky-sessions, round-robin load balancing, LAMP servers.

  Read the article

• Homebrew large data cluster access for 2 user levels?

  - by Yegor

  The title probably makes little sense, so here is an example. I have a file hosting site, that serves a large amount of semi-randomly accessed files. The setup is as follows: High horsepower front-end +DB server that also does encoding for files that need encoding Fresh file server, which stores newly uploaded content, thats probably (and usually) rapidly accessible, which has 500GB of raided SSD storage, that can push over 3GBit of traffic. 3 cheap node servers, containing 2 x 750GB SATA drives in raid1, where files older than 2 weeks are archived, from the SSD server (mentioned above). Files on each server are accessed via subdomains (via modsec) in a straight forward fashion (server1.domain.com, server2.domain.com, etc) Where I have the problem is this. I introduced a "premium" service where people pay a small fee every month, and get ad-free, quick accesses to stuff on the site. Once they are logged in, they access same files via premium.server1.domain.com via a different modsec script, with a different pass phrase. That all works fine and dandy.... except the cheap node servers are all IO bound, so accessing the files on them via a different, unsaturated network makes no difference, since it cannot read off the drive fast enough. What would be a good way to make files on the site be accessible via 2 different network routes, 1 of which will be saturated (the "free network") while all other files are on an un-saturated "premium" network?

  Read the article

• rc scripts dependencies

  - by chris

  On a Ubuntu 10.04.1 LTS server install certain services fail to start properly after a reboot. I have a couple of virtual interfaces defined on eth0: /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 172.16.5.240 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:1 iface eth0:1 inet static address 172.16.5.241 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:2 iface eth0:2 inet static address 172.16.5.242 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:3 iface eth0:3 inet static address 172.16.5.243 netmask 255.255.255.0 gateway 172.16.5.1 and so on... The services that try to bind to for example 172.16.5.243 fail during boot, complaining that there is no such IP address. My questions: 1) Are the services started parallel by default? Can I disable that so they run sequentially? 2) Is there a way to define dependencies between rc scripts? I'm only familiar with the defining the order of seqentially started scripts using the numbers in /etc/rc[0-6].d/) Any other fix or workaround appreciated.

  Read the article

• What kernel modules are required for wi-fi to work?

  - by Leonid Shevtsov

  My custom-built 2.6.32 kernel cannot connect to any WPA-protected network. The kernel includes (probably?) everything that should be needed for wifi, including IPv4 network support (IPv6 is disabled), the ath5k wireless driver (which is used in the generic Ubuntu 2.6.31 kernel) and all crypto APIs. The card is being detected, however, iwlist scan returns wlan0 Failed to read scan data : Network is down and network-manager log says <info> (wlan0): driver supports SSID scans (scan_capa 0x01). <info> (wlan0): new 802.11 WiFi device (driver: 'ath5k') <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1 <info> (wlan0): now managed <info> (wlan0): device state change: 1 -> 2 (reason 2) <info> (wlan0): bringing up device. <info> (wlan0): preparing device. <info> (wlan0): deactivating device (reason: 2). supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed <info> modem-manager is now available <WARN> default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files <info> Trying to start the supplicant... <info> (wlan0): supplicant manager state: down -> idle <info> (wlan0): device state change: 2 -> 3 (reason 0) <WARN> nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface. The exact same configuration works with the generic kernel. Is anything except wifi and crypto api needed for wi-fi to work?

  Read the article

• How to obtain PowerTop data for each core in the CPU ?

  - by kashyapa

  PowerTop application provides C-state data and p-state data , but i'm not sure which CPUcore that data pertains to. And if I'd like to obtain PowerTop data fro each CPU core, how can I accoplish that ?

  Read the article

• starting oracle 10g on ubuntu, Listener failed to start.

  - by tsegay

  I have installed oracle 10g on a ubuntu 10.x, This is my first time installation. After installing I tried to start it with the command below. tsegay@server-name:/u01/app/oracle/product/10.2.0/db_1/bin$ lsnrctl LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-DEC-2010 22:46:51 Copyright (c) 1991, 2005, Oracle. All rights reserved. Welcome to LSNRCTL, type "help" for information. LSNRCTL> start Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait... TNSLSNR for Linux: Version 10.2.0.1.0 - Production System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1))) TNS-12555: TNS:permission denied TNS-12560: TNS:protocol adapter error TNS-00525: Insufficient privilege for operation Linux Error: 1: Operation not permitted Listener failed to start. See the error message(s) above... my listener.ora file looks like this: # listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora # Generated by Oracle configuration tools. SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1) (PROGRAM = extproc) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1)) (ADDRESS = (PROTOCOL = TCP)(HOST = acct-vmserver)(PORT = 1521)) ) ) I can guess the problem is with permission issue, But i dont know where I have to do the change on permission. Any help is appreciated ... EDIT## When i run with the command sudo, i got this tsegay@server-name:/u01/app/oracle/product/10.2.0/db_1$ sudo ./bin/lsnrctl start LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-DEC-2010 01:01:03 Copyright (c) 1991, 2005, Oracle. All rights reserved. Starting ./bin/tnslsnr: please wait... ./bin/tnslsnr: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory TNS-12547: TNS:lost contact TNS-12560: TNS:protocol adapter error TNS-00517: Lost contact Linux Error: 32: Broken pipe

  Read the article

• What kernel modules are required for wi-fi to work?

  - by Leonid Shevtsov

  My custom-built 2.6.32 kernel cannot connect to any WPA-protected network. The kernel includes (probably?) everything that should be needed for wifi, including IPv4 network support (IPv6 is disabled), the ath5k wireless driver (which is used in the generic Ubuntu 2.6.31 kernel) and all crypto APIs. The card is being detected, however, iwlist scan returns wlan0 Failed to read scan data : Network is down and network-manager log says <info> (wlan0): driver supports SSID scans (scan_capa 0x01). <info> (wlan0): new 802.11 WiFi device (driver: 'ath5k') <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1 <info> (wlan0): now managed <info> (wlan0): device state change: 1 -> 2 (reason 2) <info> (wlan0): bringing up device. <info> (wlan0): preparing device. <info> (wlan0): deactivating device (reason: 2). supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed <info> modem-manager is now available <WARN> default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files <info> Trying to start the supplicant... <info> (wlan0): supplicant manager state: down -> idle <info> (wlan0): device state change: 2 -> 3 (reason 0) <WARN> nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface. The exact same configuration works with the generic kernel. Is anything except wifi and crypto api needed for wi-fi to work?

  Read the article

• 2 subnets off of 1 PC with 2 NICs

  - by Jeff

  I have a general setup I'd like to do with some IP cameras. This seems like it will work but I think I may be missing something. Our system consists of a video recorder PC connected to a switch which is connected to a number of IP cameras. I'd like to connect this system into an existing network but I want it on a different subnet. The main reason is that the cameras use a lot of bandwidth that I don't want slowing down the existing network. My idea was to install 2 NICs on the video recorder pc. 1 NIC connects to the existing network on 192.169.1.x for example, and the other NIC connect to the switch with the cameras. This NIC would be 192.168.100.x. Then we could remote to the video recorder PC with a GoToMyPC type thing for administration via the existing network. I've included a diagram of how I see this working but I'm a little fuzzy on the setup of the NICs (if this can work at all). My problem may be trying to deal with 2 subnets without a router but It really doesn't seem like it's necessary in this situation. BTW, gliffy is cool.

  Read the article

• SQL Server database filled the hard drive and freeing up space isn't possible

  - by Jon

  I have a database in SQL Server 2008 on a 1Tb hard drive and it filled the drive, there is only 4Kb free. The MDF file is 323Gb and the LDF is 653Gb. The hard disk this DB is on has no other files on it other than the MDF and LDF so it's impossible to free up any space on the drive. The main hard disk is smaller but there is enough room to transfer the MDF to that drive, in case that helps. This server is overseas at a customer site and it's not possible at the moment to add more disk space to the server. It's also not possible to delete any records because the DB is in a failed mode (due to no disk space) and it doesn't respond to most commands. The Db is currently in full recovery mode which is why the LDF file is so large. This DB really doesn't need to be in full recovery so going forward we plan on switching it to simple mode which will save us a lot of space. I also don't care about losing the LDF file, but I need all of the data. I've spent a lot of time looking for a way out of this problem but everything I've found first involves either freeing up disk space or adding more disk space, neither of which is an option at this time. I'm stuck and any help would be greatly appreciated. I get the following log when trying to switch the DB to online mode. Msg 945, Level 14, State 2, Line 3 Database 'DBNAME' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. Msg 5069, Level 16, State 1, Line 3 ALTER DATABASE statement failed. Msg 1101, Level 17, State 12, Line 3 Could not allocate a new page for database 'DBNAME' because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. I've found the following solutions but none work due to having no disk space on that drive, and since the DB is in a failed state I can't run most commmands. - DBCC SHRINKFILE - can't be run because doing a 'use DBNAME' fails - Detaching the DB and then changing the location of the MDF/LDF files, this fails because the DB is in an offline mode so you can't run detach. I'm at a loss about what else to try. Thanks.

  Read the article

• Google account gives ERR_SSL_BAD_RECORD_MAC_ALERT errors

  - by Kjensen

  A couple of days ago, I started being unable to connect to accounts.google.com, which handles logins to all kinds of google services. I get this error in Chrome: Error 126 (net::ERR_SSL_BAD_RECORD_MAC_ALERT): Unknown error. In IE I get this: I assume it is the same error, just wrapped up. I run Win8 RTM. On the SAME machine, using the same network card, in a VMWare workstation image running Win7, I am able to connect perfectly. On another of my machines on my network, I am also still able to connect with no problem. My girlfriend uses the same network and has also complained a couple of times about this error (google calendar) - but this is anecdotal, since her technical troubleshooting abilities stop at "xxxx is broken". Her machine runs Win7. ;) I have rebooted, cleared cookies, do not run any antivirus/firewall, have not changed network config. The first 3-4 days after installing Win8, I did not have any problems. I have also searched, and found a hint about enabling SSL2.0 in connection settings, which did not help. Anybody know something about this error and what I can do to fix it?

  Read the article

• How can I port forward with iptables?

  - by stu

  I want connections coming in on ppp0 on port 8001 to route to 192.168.1.200 on eth0 on port 8080 I've got these two rules -A PREROUTING -p tcp -m tcp --dport 8001 -j DNAT --to-destination 192.168.1.200:8080 -A FORWARD -m state -p tcp -d 192.168.1.200 --dport 8080 --state NEW,ESTABLISHED,RELATED -j ACCEPT and it doesn't work, what am I missing?

  Read the article

• Mounting any Windows share from OS X 10.7.5 suddenly stopped working

  - by user2169619

  I have problem with mounting Windows network shares from my OS X 10.7.5 - it worked but it stopped and nothing helps and nothing in logs. Here what I get when trying to mount it manually: mount -t smbfs //10.0.0.7/d /tmp/test When doing sniffing with tshark - no packet it sent through and I get immediately return from the command: mount_smbfs: server connection failed: Unknown error: -1 Nothing in /var/log/syslog.log and /var/log/kern.log. The Finder does not work either - it throws an error that something is wrong (in czech thus I'm not sending the message here). I just cannot connect to any network shares. In virtual Windows 7 in Parallels Desktop I can connect successfully, but not within the network share (so the Win7 is behind OS X NAT) but only with its own IP address. The Windows server share is on the same network segment connected through switch. Any advice how to debug and what can be wrong? I spent hours to find solution on Google and here but no-one with this kind of problem and I do not know how to further debug it since there is no meaningful log / trace etc. I can ping 10.0.0.7 and I can connect to FTP server on 10.0.0.7 - the Windows machine (XP) has firewall completely turned off. The problem is that with tshark, I'm not seeing any packet sending to 10.0.0.7 so it's not even trying to reach the server.

  Read the article

• Index a low-cost NAS on Windows 7

  - by JcMaco

  Has anyone found a way to index the files stored on a Networked Attached Storage on Windows 7 so that the files can be available in Windows Search and Libraries? I am referring to the cheap and available NAS like the Western Digital My Book series that use an embedded linux server. Similar question: http://windows7forums.com/windows-7-networking/6700-indexing-nas-drive-libraries.html EDIT Windows help proposes to make the files stored on the NAS available offline. This is obviously not a good solution if the NAS has more data than what the client can store. If the folder is on a network device that is not part of your homegroup, it can be included as long as the content of the folder is indexed. If the folder is already indexed on the device where it is stored, you should be able to include it directly in the library. If the network folder is not indexed, an easy way to index it is to make the folder available offline. This will create offline versions of the files in the folder, and add these files to the index on your computer. Once you make a folder available offline, you can include it in a library. When you make a network folder available offline, copies of all the files in that folder will be stored on your computer's hard disk. Take this into consideration if the network folder contains a large number of files.

  Read the article

• Trouble printing to local printer when connected to VPN with split-tunneling enabled

  - by Marve

  I'm a volunteer network admin for a multi-tenant non-profit office space. One of our new tenants uses a VPN to connect to remote resources using RRAS and Small Business Server 2008. They also have a local network printer for the workstations in our office. When connected to the VPN, they cannot print to the local printer. I informed their network admin that they need to enable split-tunneling to fix this. Their network admin enabled split-tunneling, but apparently printing still didn't work. He told me that I need to open port 1723 on our office firewall to allow it to work. I'm just a novice administrator and not familiar with RRAS, but this doesn't sound right to me and I haven't been able to find anything on the web to validate it. Additionally, my understanding of split-tunneling is that it is handled entirely by the VPN client and should work irrespective of firewall settings. Is my understanding of the situation incorrect? What steps should I take to resolve this problem?

  Read the article

• Single m0n0wall - Two LAN Subnets - How To Setup

  - by SnAzBaZ

  I have two LAN subnets that I need to link together they are 192.168.4.0/24 and 192.168.5.0/24 There is a m0n0wall running on 192.168.4.1. It's LAN connection goes out to our network switch, and it's WAN port goes out to our ADSL modem. WAN is connected via PPPoE. The 192.168.4.0 subnet contains all of our office workstations. The 192.168.5.0 subnet contains development servers and test machines that need to obtain internet access and be "managed" by computers on the 192.168.4.0 subnet, but need to be on their own subnet as well. I have a Draytek 2820N configured on 192.168.5.1 with it's WAN2 port configured as 192.168.4.25 and a default gateway of 192.168.4.1. Machines on the 5.0 subnet can connect to the internet via the m0n0wall just fine. I configured a static route on the m0n0wall LAN interface, Network 192.168.5.0/24 and Gateway 192.168.4.25. Machines on the 5.0 subnet can ping machines on the 4.0 network but the reverse does not work. I configured a new firewall rule on the m0n0wall that allows any traffic on the LAN interface with a source IP of 192.168.4.25 to be allowed. The DrayTek firewall is currently configured to pass all traffic regardless. When I try to ping a machine in the 5.0 subnet from 4.0 I see this in my m0n0wall log: BLOCK 14:45:27.888157 LAN 192.168.4.25 192.168.4.37, type echoreply/0 ICMP So the reply is being sent from the 5.0 subnet but is not being allowed to reach my workstation because the firewall is blocking it. Why is the firewall blocking it ? I hope the explanation of my network is clear, please ask if you require further clarification. Thank you.

  Read the article

• Why can't I mount an image hosted on a read-only HFS+ partition via Boot Camp?

  - by deceze

  I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Boot Camp driver package includes file system drivers that enable Windows to access the Mac OS HFS+ partition. It's read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

  Read the article

• allow infiniband for non root users

  - by user1219721

  I got Infiniband running on RHEL 6.3 [root@master ~]# ibv_devinfo hca_id: mthca0 transport: InfiniBand (0) fw_ver: 4.7.927 node_guid: 0017:08ff:ffd0:6f1c sys_image_guid: 0017:08ff:ffd0:6f1f vendor_id: 0x08f1 vendor_part_id: 25208 hw_ver: 0xA0 board_id: VLT0060010001 phys_port_cnt: 2 port: 1 state: PORT_ACTIVE (4) max_mtu: 2048 (4) active_mtu: 2048 (4) sm_lid: 2 port_lid: 3 port_lmc: 0x00 link_layer: InfiniBand port: 2 state: PORT_DOWN (1) max_mtu: 2048 (4) active_mtu: 512 (2) sm_lid: 0 port_lid: 0 port_lmc: 0x00 link_layer: InfiniBand but it's only working as root. when trying from a non-super user, I got nothing : [nicolas@master ~]$ ibv_devices device node GUID ------ ---------------- mthca0 001708ffffd06f1c So, how to allow regular users to use infiniband ?

  Read the article

• Solaris: Is it OK to disable font services?

  - by cjavapro

  Is it OK to disable these services? # svcs -l '*font*' fmri svc:/application/font/stfsloader:default name Standard Type Services Framework (STSF) Font Server loader enabled true state online next_state none state_time Sun May 30 17:58:14 2010 restarter svc:/network/inetd:default fmri svc:/application/font/fc-cache:default name FontConfig Cache Builder enabled true state online next_state none state_time Sun May 30 17:58:15 2010 logfile /var/svc/log/application-font-fc-cache:default.log restarter svc:/system/svc/restarter:default dependency require_all/none svc:/system/filesystem/local (online) dependency require_all/refresh file://localhost/etc/fonts/fonts.conf (online) dependency require_all/none file://localhost/usr/bin/fc-cache (online) #

  Read the article

• Remotely viewing IP camera on Belkin N450 DB router

  - by Mike Miller

  I need to setup a wireless IP camera (Trendnet TV-IP501W) on my network so that it is remotely visible from anywhere. Right now I successfully connected it to my home network but nothing else. My router is a Belkin N450 DB. Any help would be much appreciated, including what this would be referred to as so I could more easily ask another forum. I believe it is something like "port forwarding" but I'm not sure. Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong? Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?

  Read the article

• Internet Problem: Wireless connected but no connection to internet

  - by Josh K

  Hey i have a interesting network setup on a laptop here and for some reason the internet isnt working. I am connected to a secure network via wireless router and taskbar says i am connected and with good signal strength but in my internet browser i cant connect to any websites, the error is: This webpage is not available. (Chrome) I am using Chrome, but websites dont work on IE either. Heres a little background on the setup i have. I have a Ethernet connected to the laptop with a static ip, and then i have the wireless setup with DHCP enabled. I am using the ethernet to connect to the network (for remote desktop) but the wireless for internet (to avoid the network firewalls). this set up has worked fine for a few months, but i cant figure out what is going on now. Might be worth it to note it is a Lenovo Thinkpad and i just uninstalled ThinkVantage Access Connections (as it was giving me ample problems prior to this one, which i consider a step up) Tried repairing connection as well, let me know if you guys have any ideas please! EDIT: Solved-Dead Modem in the server room.... Sorry guys didn't have access to that myself

  Read the article

• Why do disk images hosted on a read-only HFS+ partition behave differently?

  - by deceze

  I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Boot Camp driver package includes file system drivers that enable Windows to access the Mac OS HFS+ partition. It's read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

  Read the article

• DD-WRT Acces Point as a Router

  - by Dzh

  Following suggestion to this question asked on Network Engineering, I am asking the question here. this is an extension to my previous question (I think it was deleted), where I was claiming that DDWRT was disabling it's DHCP server once connected to the network. I was wrong, as it now seems that it is bridging itself with another parallel connected wireless router. I have two Draytek 2820 and one Netgear WG602v3 with latest DDWRT. Lets call one wired-Draytek and it has wireless disabled. The other one, let's call it wireless-Draytek, is connected to wired-Draytek and has wireless with MAC filtering enabled. Once I connect Netgear to the wired-Draytek, the client that connects to Netgear, will be assigned with IP address from the wireless-Draytek. If the MAC address is not on the wireles-Draytek, the client is unable to obtain IP address and has no connectivity at all, even with manually assigned static IP configuration. To illustrate further, this is how network is set up: wired-Draytek ---------- wireless-Draytek \_________ Netgear What I wish to have, is that Netgear issues IP addresses from it's own IP pool and ignores the MAC filtering rules from wireless-Draytek. This is kind of puzzling how this they are bridging (if they are) themselves automatically. Thanks. UPDATE: It's not a home network. I gave you a bit simplified set-up. If there is a better site on Stack Exchange to ask this, please let me know. The Drayteks are running stock firmware, it's only Netgear that I've flashed to get more stability. In addition to these routers, I have also three 3COM Baseline switch 2824, and another Draytek router with Prosafe FS752TP PoE switch dedicated for VoIP phones. Wired-Draytek has IP 10.0.0.1, DHCP disabled as there is AD DC which is issuing IP addresses. Wireless-Draytek has IP 1.1.1.1 and DHCP enabled. Netgear has default - 192.168.1.1. As per suggestion, the specific question is - how do I isolate these two wireless routers?

  Read the article

• Keep source IP after NAT

  - by John Miller

  Until today I used a cheapy router so I can share my internet connection and keep a webserver online too, while using NAT. Users IP ($_SERVER['REMOTE_ADDR']) was fine, I was seeing class A IPs of users. But as traffic grown up everyday, I had to install a Linux Server (Debian) to share my Internet Connection, because my old router couldn't keep the traffic anymore. I shared the internet via IPTABLES using NAT, but now, after forwarding port 80 to my webserver, now instead of seeing real users IP, I see my Gateway IP (Linux Internal IP) as any user IP Address. How to solve this issue? I edited my post, so I can paste the rules I'm currently using. #!/bin/sh #I made a script to set the rules #I flush everything here. iptables --flush iptables --table nat --flush iptables --delete-chain iptables --table nat --delete-chain iptables -F iptables -X # I drop everything as a general rule, but this is disabled under testing # iptables -P INPUT DROP # iptables -P OUTPUT DROP # these are the loopback rules iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # here I set the SSH port rules, so I can connect to my server iptables -A INPUT -p tcp --sport 513:65535 --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 --dport 513:65535 -m state --state ESTABLISHED -j ACCEPT # These are the forwards for 80 port iptables -t nat -A PREROUTING -p tcp -s 0/0 -d xx.xx.xx.xx --dport 80 -j DNAT --to 192.168.42.3:80 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p tcp -s 192.168.42.3 --sport 80 -j ACCEPT # These are the forwards for bind/dns iptables -t nat -A PREROUTING -p udp -s 0/0 -d xx.xx.xx.xx --dport 53 -j DNAT --to 192.168.42.3:53 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p udp -s 192.168.42.3 --sport 53 -j ACCEPT # And these are the rules so I can share my internet connection iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0:1 -j ACCEPT If I delete the MASQUERADE part, I see my real IP while echoing it with PHP, but I don't have internet. How to do, to have internet and see my real IP while ports are forwarded too? ** xx.xx.xx.xx - is my public IP. I hid it for security reasons.

  Read the article

• How to port VirtualBox machines with the recent snapshot?

  - by Liran Orevi

  I've ported a 'hard disk' using the 'clonehd' advice given on How to easily port VirtualBox machines? But it's not at the latest state, it's probably before any 'snapshot' was taken. I have only copied the 'hard disk', I haven't copied any 'snapshot' mainly because there are so many. I'm interested to transfer the 'hard disk' at it's latest state. How can this be done? (easily and not by coping the entire snapshots, machine etc...)

  Read the article

< Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >