Search Results

Search found 30524 results on 1221 pages for 'display errors'.

Page 321/1221 | < Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >

• Wired connection not being recognized

  - by maxifick

  I'm on Ubuntu Maverick (10.10). I've read a few threads regarding wired connection problems, but haven't found a solution yet. The problem appears after I connect to a wireless network. When I disconnect wireless and plug in an internet cable, the wired connection is not recognized at all. Even the socket appears dead (there are no diodes flashing). The only solution so far seems to be restarting the computer. Network Manager then tries to connect to a Wi-Fi, but the wired connection is listed and working. I've tried sudo restart network-manager, but that doesn't solve anything. After a while, available wireless networks start appearing, but the wired still doesn't. Any ideas? Thanks in advance. Edit: Here is the dmesg output after switching off Wi-Fi and then plugging the internet cable. [18200.623543] Restarting tasks ... done. [18200.648422] video LNXVIDEO:00: Restoring backlight state [18200.707580] sky2 0000:02:00.0: eth0: phy I/O error [18200.707715] sky2 0000:02:00.0: eth0: phy I/O error [18200.707819] sky2 0000:02:00.0: eth0: phy I/O error [18200.707922] sky2 0000:02:00.0: eth0: phy I/O error [18200.708025] sky2 0000:02:00.0: eth0: phy I/O error [18200.708127] sky2 0000:02:00.0: eth0: phy I/O error [18200.708229] sky2 0000:02:00.0: eth0: phy I/O error [18200.708332] sky2 0000:02:00.0: eth0: phy I/O error [18200.708824] sky2 0000:02:00.0: eth0: enabling interface [18200.709587] ADDRCONF(NETDEV_UP): eth0: link is not ready [18202.662422] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [18203.324061] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [18211.193137] eth1: no IPv6 routers present [18212.844649] usb 5-1: new low speed USB device using ohci_hcd and address 5 [18213.017235] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input16 [18213.017499] generic-usb 0003:0461:4D17.0004: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.0-1/input0 After system restart, dmesg says this: [ 19.802126] sky2 0000:02:00.0: eth0: enabling interface [ 19.802394] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.812533] device eth0 entered promiscuous mode [ 21.495547] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 21.495677] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 21.496574] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

  Read the article

• How to quickly search through a very large list of strings / records on a database

  - by Giorgio

  I have the following problem: I have a database containing more than 2 million records. Each record has a string field X and I want to display a list of records for which field X contains a certain string. Each record is about 500 bytes in size. To make it more concrete: in the GUI of my application I have a text field where I can enter a string. Above the text field I have a table displaying the (first N, e.g. 100) records that match the string in the text field. When I type or delete one character in the text field, the table content must be updated on the fly. I wonder if there is an efficient way of doing this using appropriate index structures and / or caching. As explained above, I only want to display the first N items that match the query. Therefore, for N small enough, it should not be a big issue loading the matching items from the database. Besides, caching items in main memory can make retrieval faster. I think the main problem is how to find the matching items quickly, given the pattern string. Can I rely on some DBMS facilities, or do I have to build some in-memory index myself? Any ideas? EDIT I have run a first experiment. I have split the records into different text files (at most 200 records per file) and put the files in different directories (I used the content of one data field to determine the directory tree). I end up with about 50000 files in about 40000 directories. I have then run Lucene to index the files. Searching for a string with the Lucene demo program is pretty fast. Splitting and indexing took a few minutes: this is totally acceptable for me because it is a static data set that I want to query. The next step is to integrate Lucene in the main program and use the hits returned by Lucene to load the relevant records into main memory.

  Read the article

• Introducing weblog OIM11gR2

  - by Shashidhar Malyala

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Having a centralized Identity & Access Management Solutions in any environment can reduce costs, time and errors drastically. For many Organizations today implementing a robust and reliable I&AM solution is a challenge. As more and more an organization grows, new IT applications are used. This in turn leads to complex identity and access management process which is time consuming and subject to errors. Most of these challenges can be addressed by leveraging Oracle OIM11gR2.     Contributions to this blog are made by ATS GSD-Security team. This weblog brings to you various articles on Oracle I&AM 11g R2. The articles include OIM11gR2 new features, Various ‘How To’ with examples, Solutions/ workarounds for frequently occurring issues, APIs, code samples, Installations, patches etc…

  Read the article

• Mobile web app, styling in percentages; I can't get height to work [migrated]

  - by Mick79

  I am building a mobile app for a band and obviously want it to display well in all the plethora of handsets out there today. I built it at first for my own device and it looks and works great, so now I am reworking it in percentages so that it works in all devices. I have a slider (jquerytools) going on and if i set width to 100% then it is perfectly wide in my iphone and my ipad... success, however I am not having any luck with height. It seems to only accept a height in px. If i set a height in percent it just doesn't display. any ideas? #header{ width:100%; height:198px; position:relative; z-index: 20; box-shadow: 0 0 10px white; } .scrollable { /* required settings */ position:relative; overflow:hidden; width: 100%; height:100%; box-shadow: 0 0 20px purple; z-index: 20; } .scrollable .items { /* this cannot be too large */ width:500%; height:100%; position:absolute; clear:both; box-shadow: 0 0 30px green; } .items div { float:left; width:20%; height:100%; } /* single scrollable item */ .scrollable img { float:left; width:100%; height:100%; /* height:198px; */ } /* active item */ .scrollable .active { border:2px solid #000; position:relative; cursor:default; } `

  Read the article

• No sigal showing on LCD TV when Conects Leptop via VGA Cable

  - by Amit Prajapati

  I am trying to connect my laptop to Samsung LCD TV by VGA TO HDMI cable My Laptop find Samsung tv on display setting. But When I press fn+F7 key my TV display No Signal My laptop specifications are: "Lenovo R61 ThinkPad, Model: 8935AE7 Window7 Ultimate 32 bits 2GB RAM VGA Port available No HDMI Port My TV specification are: Samsung LCD 26 HDMI Port available VGA Port Available I want to know what is problem? When I connect Another Dell Laptop (Window7 32 bit) with HDMI to HDMI cable it work properly. Thanks in Advance!

  Read the article

• Gathering application architecture

  - by userbb

  Suppose there is system for gathering info about system activities. There is a client part with an interface and there are agent parts that are installed on each machine. I estimate that there could be max 20 computers now. Later could be more like 50. My solutions: Agent stores data into local database e.g. sqlite. There is also a service which can be used by a client to query data. So if a client wants to display data for 50 computers, he sends a query to 50 computers. I'am on that solution now but maybe it's totally wrong. Agent stores data into local database (I don't known good one for that). There is also server (main database) and local databases are synchronized with the server. In this case, a client connects to the main database to display data. Agent sends data in realtime to main database. So same as point 2, but there is no sync. Like in point 3, but agent buffers data in local database and sends it in small chunks to main database. What is the best approach?

  Read the article

• Stairway to Database Design STEP 2: Domains, Constraints and Defaults

  A clear understanding of SQL Data Types and domains is a fundamental requirement for the Database Developer, but it is not elementary. If you select the most appropriate data type, it can sidestep a variety of errors. Furthermore, if you then define the data domains as exactly as possible via constraints, you can catch a variety of those problems that would otherwise bedevil the work of the application programmer.

  Read the article

• How to Reset Windows 7 to its default font for the whole system?

  - by Fellknight

  This might sound a little bit silly but please bear with me. Somehow I changed my default display font, the one that Windows uses for system dialog boxes, accept/cancel buttons, pretty much everything in the system (it even goes as far as to change how my the text in my web browser appears). Now everything that it's affected looks like under the effects of the bold button in office (very black and very thick words). This is an inconvenience for example on some mail accounts who use this effect to display unread messages. Is there any way to return it to its default state, non "bold" typography for the whole system?

  Read the article

• Is there a way to watch EyeTV in alarm-clock style "sleep" mode on your iMac?

  - by Mark S.

  My wife likes to watch TV to go to sleep, the only trouble is that the only TV we have in our house is the iMac with the EyeTV Hybrid. I'd like to have the TV turn off after 1.5 hours of watching without changing the channels/volume--sortof like an alarm clock 'sleep' function. Do you know of a way to do this either with an EyeTV plugin or an App that might be able to try to detect such conditions and shut down the display? Right now EyeTV overrides the screensaver. The Power saver functions don't really work because she doesn't start watching at the same time every night and periodically she will want to record a 2 or 3 AM show. All I want to do is "close" (but not quit) EyeTV and shut off the display.

  Read the article

• Office 2007 Mail Merge: How do I view field names instead of data?

  - by One Monkey

  I've just received a document which forms the basis of a mail merge as an attachment and I need to view the field names like they display in 2003 with the double chevrons e.g. <<titles>><<initials>><<surname>> However even though I get a dialogue as I open the docx file saying that it is going to attempt to merge from a file (which I don't have) and I cancel that operation the document still displays merge data e.g. Mr A Test Instead of the field names. I have clicked on the fields which turn grey to demonstrate that they are fields but I can't find a way to make it display the field names not the data. I don't even know where it's getting the data from as I don't have the data source file for the document to use.

  Read the article

• Does Windows 8 Need New, Specialized Drivers?

  - by Synetech

  It seems like an obvious question, but I’m having a difficult time finding out if Windows 8, with all its changes, will require new, specialized drivers. I see that a lot of manufacturers have started releasing Windows 8-specific drivers for their hardware, but what about those that are not, will Windows XP or 7 drivers work or have they changed the driver/system/security architecture again, thus requiring new drivers? The closest thing I could find to an answer was a thread in which it was mentioned that the display driver model was again updated, thus requiring new display drivers, but not much else (e.g., audio cards, printers, chipsets, etc.)

  Read the article

• Quickly Warning

  - by bradjones

  Every time I run my application I receive these warning errors can anyone tell me what is causing them? $ quickly run /usr/lib/python2.7/dist-packages/gi/overrides/Gtk.py:391: Warning: g_object_set_property: construct property "type" for object `Window' can't be set after construction Gtk.Window.__init__(self, type=type, **kwds) /usr/lib/python2.7/dist-packages/gi/overrides/Gtk.py:391: Warning: g_object_set_property: construct property "type" for object `AppWindow' can't be set after construction Gtk.Window.__init__(self, type=type, **kwds)

  Read the article

• How do I prevent Ubuntu gradually slowing down to a stop?

  - by user29165

  I really do not know what is causing the problem of my desktop environment (D.E.) gradually slowing down. It seems to happen in Gnome 3.2, LXDE, XFCE, and KDE. I am running Ubuntu 11.10 and this problem started happening from a fresh install. I have noticed that if I restart Gnome or otherwise re-log-in with any of the D.E.s the speed resets to normal. I don't seem to have and memory leaks that account for it and there are not any processes that are using excessive CPU cycles. Due to the symptoms I am guessing that there is an underlying package that interacts with all D.E.s that is the source of the problem. Just to clarify, in extreme situations, if I let the slowdown continue without a restart of the D.E. my system will finally get to a point where everything, even my clock, freezes. The time over which Gnome slows down (noticeably after 17 hrs) is much less than LXDE, or XFCE but eventually they freeze as well. I didn't mention Unity since I haven't used it enough to verify the problem, but I don't see why it should be different. Just in case this is relevant, I Suspend my computer rather than turn it off. I do this because of the greatly reduced load time and the 17 hrs I stated above is actual up-time, not time where the D.E. is actually active. However, the slow down does not seem to be affected by how long the computer has been in suspend mode. I know that it is possible that this problem is due to an interaction between two or more of the applications that I use and as such it may not be able to be duplicated by others. In the end I am just wondering (a) are other people experiencing this issue and (b) does anyone have some advice on where to start looking for a solution if one is not already known. I am even open to the idea of switching to the beta release of 12.04 if anyone thinks it will solve the problem. Edit: I took a video of my latest freeze that you can watch at http://youtu.be/flKUqUzCmdE, sorry about the audio. Edit: Since that video I checked my memory for errors and tried installing the proprietary video drivers. No memory errors were found and the proprietary video drivers made the display unusable so I had to uninstall them. Any thoughts?

  Read the article

• Specify Linq To SQL ConnectionString explicitly

  - by Michael Freidgeim

  When modifying Linq to  Sql data model in Visual Studio 2010,  it re-assigns ConnectionString that is available on developer’s machine. Because the name can be different on different machines, Designer often replace it with something like ConnectionString1, which causes errors during deployment.It requires developers to ensure that ConnectionString stays unchanged.  More reliable way is to use context constructor with explicit ConnectionString name instead of parameterless default constructor GOOD:   var ctx = new MyModelDataContext(Settings.Default.ConnectionString);Not good:          var ctx = new MyModelDataContext();

  Read the article

• Starting a new Open-source project - 2 - CommonEventLog is available.

  - by TATWORTH

  On this project I needed to provide unit tests both in NUnit and MSTest. I will write about this later.Once done, both projects ran without errors being detected. I loaded up the main project as source to CodePlex. (Resharper was very helpful in that it would run both sets of tests - thank you Jet Brains!) Can't code withoutIn-depth C# code analysis with instant errorand warning highlighting and quick-fixes

  Read the article

• Laptop wont start after BIOS update

  - by Maven

  I have a HP Probook 4540s i recently update its BIOS from HP's site after the installation the notebook re started but since after that there is no display i waited for an hour until the battery ran off after when i plugged in its same: Capslock is contunously blinking Fan is running faster than the usual speed i can tell this from the sound And no display i waited for more than hour for any response but no gain. Searched Internet and find out that alot people fails to update their BIOS in HP laptop i dont know why official HP sites has such updates even avaialble. Is there a way i can reset the BIOS, Hard reset, through USB of something i have another PC over which i can download anything if its required? Can anyone please help.

  Read the article

• Internal speakers do not work

  - by Nikcefo

  I have a new (from scratch, not update) installation of Ubuntu 12.10 on my notebook, Asus A3Ac (It is based on Intel Centrino - Pentium M with full duplex Intel HDA codec). In older versions of Debian-based systems Intel HDA audio didn't work correctly. Alsamixer display wrong outputs and inputs (more than notebook really have). In clean installations internal speakers were playing, but they didn't mute when headphones was plugged in. There was a solution (propably not the best but working) - edit as root /etc/modprobe.d/alsa-base.conf and add a line "options snd-hda-intel model=z71v position_fix=1". After restart it worked correctly (alsamixer displayed correct devices and internal speakers were muted after I plugged in headphones). It was also working in Ubuntu 12.04. In Ubuntu 12.10 I have another problem. The alsamixer in default (don't have to edit alsa-base.conf) display correct outputs and inputs but internal speakers don't working if the headphones isn't plugged in. I have to manually disable "Auto-Mut" option in alsamixer, then the internal spakers works (but of course they don't mute when the headphones are pluged in). Thanks for any idea how to fix it. I'm not sure if it is a bug or it's caused by a "specific hardware". Tomas

  Read the article

• Linux distro for acer 4741G laptop

  - by sandundhammikaperera

  Hi all, I need to install linux for my acer 4741 laptop. Anyone who did this before and managed to solve the device driver problems please share your experience with me. I already installed the backtrack linux and I able to make it work the both wireless and wired network connections and also the sound card is also working. But the problem is that I unable to configure 1360x768 resolution of the display. The display looking really flat and ugly under that linux. some help ? can you guide how to correctly configure the /etc/X11/xorg.conf ? --Thanks in advance--

  Read the article

• Working Qt controls in a 3d environment

  - by Jay

  I need some advice from a Qt expert. The background: I have a 3D engine (ogre3d) working in concert with Qt. The 3D Content is displayed in a widget (using a custom OS window in the client area). I'm able to overlay arbitrary Qt widgets onto the 3d world using the widget render() method and a shared bitmap. This makes a great "heads up display". I can use the standard Qt style sheets and animation using this technique. My goal I'd like to go a step further and allow the user to move these rendered widgets using the mouse. I'd like some advice on the best way to implement this. Possible solutions: The widgets in the HUD are not part of the inheritance chain. I render them manually. They don't get events though. I could add them to the inheritance chain so they get events in the usual way. Then I would need to change them to render to my shared bitmap instead of to the operating system. I looked at this once but couldn't find enough information to implement it. Capture mouse events in the 3D display widget and EMIT them to child controls. I basically create my own event handling chain. Any suggestions on how to implement this? I'm also considering switching to Qt5. I'm not sure how that might affect this decision.

  Read the article

• SEO - Build Traffic With Common Error Messages

  If you want to build immediate traffic to your website, there is one sure fire way to accomplish this, but it's filled with errors. In this article, we will tell you how to build web traffic from common error messages.

  Read the article

• What laptops can run an external 27" or 30" screen at 2560x1600 native resolution? [closed]

  - by Moin Zaman

  SU Folks, What laptops do you know off that can run a 27" or 30" external monitor as a secondary display (Extending desktop onto second screen, without switching off the laptop's own built in screen) at the screens native resolution of 2560x1600. I'm not interested docks or USB video adapters etc. Just via the laptop's built in display ports. List the port used and cable as well if possible. Reference links / posts that confirm it are an added bonus. I'm hoping people who've tried it themselves and / or confirmed it can list specific models of laptops so we can build up a good list.

  Read the article

• Comparing multiple revisions of the same C File

  - by Draineh

  Hi, I just wondered if anyone had any tricks or programs they used when comparing two of the same file but different versions? I appear to have foolishly made a modification at some point today (Went a few hours without running any tests) and it has stopped the whole project working - without throwing up any errors so it must be subtle whatever I have done. I just thought that there must be a program out there that might highlight differences etc. Otherwise, a step by step search might be in order! Thanks

  Read the article

• Multiple vulnerabilities in OpenSSL

  - by chandan

  CVE DescriptionCVSSv2 Base ScoreComponentProduct and Resolution CVE-2012-2110 Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability 7.5 OpenSSL Solaris 10 SPARC: 147159-05 147707-06 X86: 146672-07 CVE-2012-2131 Numeric Errors vulnerability 7.5 This notification describes vulnerabilities fixed in third-party components that are included in Sun's product distribution.Information about vulnerabilities affecting Oracle Sun products can be found on Oracle Critical Patch Updates and Security Alerts page.

  Read the article

• Multiple vulnerabilities in OpenSSL

  - by chandan

  CVE DescriptionCVSSv2 Base ScoreComponentProduct and Resolution CVE-2012-2110 Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability 7.5 OpenSSL Solaris 11 Contact Support Solaris 10 SPARC: 147159-05 147707-06 X86: 146672-07 CVE-2012-2131 Numeric Errors vulnerability 7.5 This notification describes vulnerabilities fixed in third-party components that are included in Sun's product distribution.Information about vulnerabilities affecting Oracle Sun products can be found on Oracle Critical Patch Updates and Security Alerts page.

  Read the article

• Is it necessary for a Windows Server 2008 R2 to join a domain so that its IIS can communicate correctly?

  - by Jack

  I have a Windows Server 2008 R2 that is not join to any domain. I have developed an web application that will display the domain name and the username on the server itself. However, when I publish my web application to IIS, it always fail and display different types of error messages (because I change settings such as Enabled ASP.NET Impersonation, Disable Anonymous Authentication, Set Application Pool to Classic and so on) So, I was wondering if it is necessary for the Server to join in a domain so that I can reduce any unnecessary error message and be able to zoom into the correct direction?

  Read the article

< Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >