Search Results

Search found 49727 results on 1990 pages for 'multiple select query'.

Page 321/1990 | < Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >

  • Daisy-chaining network switches with multiple cables

    - by user72153
    This might just be the dumbest question you'll ever read, but I digress. Say I have two 100Mbps Ethernet switches with 2 computers on each, connected together by a single cable. This way, the two PCs on each switch share the 100Mbps bandwidth with the others. If I added another cable between the 2 switches, would there be 200Mbps throughput available between the switches? Or am I completely off my rocker? Thanks for the help.

    Read the article

  • DHCP server with multiple interfaces on ubuntu, destroys default gateway

    - by Henrik Kjus Alstad
    I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

    Read the article

  • Call to undefined function query() - using PDO in PHP

    - by webworm
    I have a written a script in PHP that reads from data from a MySQL database. I am new to PHP and I have been using the PDO library. I have been developing on a Windows machine using the WAMP Server 2 and all has been working well. However, when I uploaded my script to the LINUX server where it will be used I get the following error when I run my script. Fatal error: Call to undefined function query() This is the line where the error is occuring ... foreach($dbconn->query($sql) as $row) The variable $dbconn is first defined in my dblogin.php include file which I am listing below. <?php // Login info for the database $db_hostname = 'localhost'; $db_database = 'MY_DATABASE_NAME'; $db_username = 'MY_DATABASE_USER'; $db_password = 'MY_DATABASE_PASSWORD'; $dsn = 'mysql:host=' . $db_hostname . ';dbname=' . $db_database . ';'; try { $dbconn = new PDO($dsn, $db_username, $db_password); $dbconn->setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION); } catch (PDOException $e) { echo 'Error connecting to database: ' . $e->getMessage(); } ?> Inside the function where the error occurs I have the database connection defined as a superglobal as such ... global $dbconn; I am a bit confused as to what is happening since all worked well on my development machine. I was wondering if the PDO library was installed but from what I thought it was installed by default as part of PHP v5. The script is running on an Ubuntu (5.0.51a-3ubuntu5.4) machine and the PHP version is 5.2.4. Thank you for any suggestions. I am really lost on this.

    Read the article

  • Gnu/Linux package manager, multiple versions, no root privilege

    - by user744629
    I'm looking for a Gnu/Linux package manager, that can help to package, distribute, install sofware (actually scientific libraries), like this: do not required root privilege, for example, install in $HOME/opt or $HOME/local manage muliple version of a library, for example, with this directories organisation: $HOME/opt/somelib/4.2.1/lib/ $HOME/opt/somelib/4.2.1/include/ $HOME/opt/somelib/4.2.1/bin/ $HOME/opt/somelib/4.2.2/lib/ $HOME/opt/somelib/4.2.2/include/ $HOME/opt/somelib/4.2.2/bin/ $HOME/opt/anotherlib/1.0.0/lib/ $HOME/opt/anotherlib/1.0.0/include/ $HOME/opt/anotherlib/1.0.0/bin/ package contains source files, not binaries, build is performed during install. support for Mac OS X too would be good. Then it's up to the user to manage it's LD_LIBRARY_PATH, or compile with -L/good/path etc. Does it exists?

    Read the article

  • Atomic INSERT/SELECT in HSQLDB

    - by PartlyCloudy
    Hello, I have the following hsqldb table, in which I map UUIDs to auto incremented IDs: SHORT_ID (BIG INT, PK, auto incremented) | UUID (VARCHAR, unique) Create command: CREATE TABLE table (SHORT_ID BIGINT GENERATED BY DEFAULT AS IDENTITY PRIMARY KEY, UUID VARCHAR(36) UNIQUE) In order to add new pairs concurrently, I want to use the atomic MERGE INTO statement. So my (prepared) statement looks like this: MERGE INTO table USING (VALUES(CAST(? AS VARCHAR(36)))) AS v(x) ON ID_MAP.UUID = v.x WHEN NOT MATCHED THEN INSERT VALUES v.x When I execute the statement (setting the placeholder correctly), I always get a Caused by: org.hsqldb.HsqlException: row column count mismatch Could you please give me a hint, what is going wrong here? Thanks in advance.

    Read the article

  • How to host multiple mail domains with courier?

    - by Dave Vogt
    I had my server set up with generic aliases in /etc/courier/aliases/users, which worked fine. But today I wanted to host some new domains, where addresses overlap. What I need is that [email protected] goes to account "dv", but [email protected] goes to account "d2". So I set up a new file containing fully qualified addresses ([email protected]: dv) instead of the previous dave: dv. But somehow, courier-smtpd doesn't accept mail to these addresses anymore. makealiases -dump prints all the aliases the way they should be.. so i'm a bit stuck.

    Read the article

  • SQL Server: SELECT rows with MAX(Column A), MAX(Column B), DISTINCT by related columns

    - by z531
    Scenario: Table A MasterID, Added Date, Added By, Updated Date, Updated By, 1, 1/1/2010, 'Fred', null, null 2, 1/2/2010, 'Barney', 'Mr. Slate', 1/7/2010 3, 1/3/2010, 'Noname', null, null Table B MasterID, Added Date, Added By, Updated Date, Updated By, 1, 1/3/2010, 'Wilma', 'The Great Kazoo', 1/5/2010 2, 1/4/2010, 'Betty', 'Dino', 1/4/2010 Table C MasterID, Added Date, Added By, Updated Date, Updated By, 1, 1/5/2010, 'Pebbles', null, null 2, 1/6/2010, 'BamBam', null, null Table D MasterID, Added Date, Added By, Updated Date, Updated By, 1, 1/2/2010, 'Noname', null, null 3, 1/4/2010, 'Wilma', null, null I need to return the max added date and corresponding user, and max updated date and corresponding user for each distinct record when tables A,B,C&D are UNION'ed, i.e.: 1, 1/5/2010, 'Pebbles', 'The Great Kazoo', 1/5/2010 2, 1/6/2010, 'BamBam', 'Mr. Slate', 1/7/2010 3, 1/4/2010, 'Wilma', null, null I know how to do this with one date/user per row, but with two is beyond me. DBMS is SQL Server 2005. T-SQL solution preferred. Thanks in advance, Dave

    Read the article

  • Windows file locks allowing multiple users to write to open file over network

    - by JPbuntu
    I have 6 windows computers (xp,vista,7) that need to access a samba share (Ubuntu 12.04). I am trying to make it so only one client can open a file at a given time. I thought this was pretty standard behavior of file locks, but I can't get it to work. The way it is right now a file can be open by two users, and changed and saved by either one of them. The last file saved overwrites what ever changes the other user made. At first I thought this was a Samba configuration problem, but I get this behavior even between two windows machines. So far I have only tested: Windows Xp Windows Vista Windows XP Samba << Windows Vista and both give the same behavior. When I tested the Samba configuration, I had set strict locking = yes and get errors logged like this: close_remove_share_mode: Could not get share mode lock for file _prod/part_number_list_COPY.xlsx Eventually all of the files are going to be moved onto the Samba share, so that is the configuration I am most concerned about fixing. Any ideas? Thanks in advance. EDIT: I tested an excel file again, and it is now working properly in both above mentioned cases, I am also no longer getting the above mentioned error. I don't know what happened, perhaps a restart fixed it? (also works with strict locking = no) Although I still need to find a solution for the CAD/CAM files we use, the software is Vector and it does not seem to be using file locks. Is there any software that I can use to manage these files, so two people can't open/edit them at a time? Maybe a windows application that forces file locks? Or a dirt simple version control system? (the only ones I have seen at are too complicated for our needs).

    Read the article

  • Apache doesn't run multiple requests

    - by Reinderien
    I'm currently running this simple Python CGI script to test rudimentary IPC: #!/usr/bin/python -u import cgi, errno, fcntl, os, os.path, sys, time print("""Content-Type: text/html; charset=utf-8 <!doctype html> <html lang="en"> <head> <meta charset="utf-8" /> <title>IPC test</title> </head> <body> """) ftempname = '/tmp/ipc-messages' master = not os.path.exists(ftempname) if master: fmode = 'w' else: fmode = 'r' print('<p>Opening file</p>') sys.stdout.flush() ftemp = open(ftempname, fmode) print('<p>File opened</p>') if master: print('<p>Operating as master</p>') sys.stdout.flush() for i in range(10): print('<p>' + str(i) + '</p>') sys.stdout.flush() time.sleep(1) ftemp.close() os.remove(ftempname) else: print('<p>Operating as a slave</p>') ftemp.close() print(""" </body> </html>""") The 'server-push' portion works; that is, for the first request, I do see piecewise updates. However, while the first request is being serviced, subsequent requests are not started, only to be started after the first request has finished. Any ideas on why, and how to fix it? Edit: I see the same non-concurrent behaviour with vanilla PHP, running this: <!doctype html> <html lang="en"> <!-- $Id: $--> <head> <meta charset="utf-8" /> <title>IPC test</title> </head> <body> <p> <?php function echofl($str) { echo $str . "</b>\n"; ob_flush(); flush(); } define('tempfn', '/tmp/emailsync'); if (file_exists(tempfn)) $perms = 'r+'; else $perms = 'w'; assert($fsync = fopen(tempfn, $perms)); assert(chmod(tempfn, 0600)); if (!flock($fsync, LOCK_EX | LOCK_NB, $wouldblock)) { assert($wouldblock); $master = false; } else $master = true; if ($master) { echofl('Running as master.'); assert(fwrite($fsync, 'content') != false); assert(sleep(5) == 0); assert(flock($fsync, LOCK_UN)); } else { echofl('Running as slave.'); echofl(fgets($fsync)); } assert(fclose($fsync)); echofl('Done.'); ?> </p> </body> </html>

    Read the article

  • how to run multiple shell scripts in parallel

    - by tom smith
    I've got a few test scripts, each of which runs a test php app. Each script runs forever. So, cat.sh, dog.sh, and foo.sh, each run a php script, and each shell script runs the php app in a loop, so it runs forever, sleeping after each run. I'm trying to figure out how to run the scripts in parallel, and at the same time, see the output of the php apps in the stdout/term window. I thought, simply doing something like foo.sh > &2 dog.sh > &2 cat.sh > &2 in a shell script would be sufficient, but it's not working. foo.sh, runs foo.php once, and it runs correctly dog.sh, runs dog.php in a never ending loop. it runs as expected cat.sh, runs cat.php in a never ending loop *** this never runs!!! it appears that the shell script never gets to run cat.sh. if i run cat.sh by itself in a separate window/term, it runs as expected... thoughts/comments

    Read the article

  • Running multiple services on Port 443, Tunnel SSH over HTTPS

    - by lajuette
    Situation: I want to tunnel SSH sessions through HTTPS. I have a very restrictive firewall/proxy which only allows HTTP, FTP and HTTPS traffic. What works: Setting up a tunnel through the proxy to a remote linux box that has a sshd listening at port 443 The problem: I have to have a web server (lighty) running at port 443. HTTPS traffic to other ports is forbidden by the proxy. Ideas so far: Set up a virtual host and proxy all incoming requests to localhost: (e.g. 22) $HTTP["host"] == "tunnel.mylinux.box" { proxy.server = ( "" => (("host" => "127.0.0.1", "port" => 22)) ) } Unfortunately this won't work. Am i doing something wrong, or is there a reason, that this won't work?

    Read the article

  • What Issue Tracking System to select?

    - by Mikee
    What Issue Tracking Sytem is the most appropriate for fast, big, multilingual and international websites? The system has to handle both technical and content/editorial issues. What's the size and type of your site do you run? Whart System are you using for the keeping it state of the art? Thanks a lot for sharing your good or bad experience.

    Read the article

  • multiple folder structures/views

    - by Sojourner
    Newbie. Setting up a server for a law firm. Want to set up the folder structure as follows: Client 1 Name -- Matter 1 (i.e. setting up corporation) -- Matter 2 (i.e. divorce) -- Matter 3 (i.e. setting up trust) Client 2 Name -- Matter 1 Client 3 Name -- Matter 1 and so on. But the attorneys prefer navigating a folder structure, more based on what case type: Civil -- Client 1 Name (i.e. Smythe) -- Client 2 Name (i.e. Jones) -- Client 3 Name (i.e. Johson) -- Landlord/Tenant -- Client 1 Name (i.e. Jones) -- Client 2 Name (i.e. Johson) -- Class Action Suits -- Suit 1 -- Suit 2 Personal Injury -- Client 1 Name -- Client 2 Name -- Client 3 Name Criminal -- Client 1 Name (i.e. Smythe) I'd like to know if it's possible to set up the server with the first folder structure (it's more organized and easier to employ scripts), while having the second folder structure available for users who find it easier to deal with the same types of cases grouped together.

    Read the article

  • Multiple home routers

    - by netvope
    Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

    Read the article

  • Multiple home routers

    - by netvope
    Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

    Read the article

  • windows server 2008r2 with terminal services in multiple networks with different users

    - by phhe
    is there a way to let terminal services make some kind of 'abstraction' over the physical network interfaces of the server so they can be managed via gpo to grant or prohibit access for different users? the basic idea is to have 2 network interfaces (user and server/management) and not letting users within terminal sessions access the server/management network. or is this just impossible ? what would be a better way to do this ?

    Read the article

  • Multiple subnets on isc-dhcp-server using ddns with bind9

    - by legioxi
    On my network I have two subnets: 10.100.1.0/24 - Wired/wireless 10.100.7.0/24 - VPN Both subnets are served by isc-dhcp-server running on a Debian VM. This same VM runs bind9 for my DNS. ISC-DHCP-SERVER is configured to use DDNS and update BIND9 with hosts/IPs. Everything runs great until a device drops off the wired/wireless network and pops onto the VPN. When connecting on the VPN, a DHCP lease is handed out on the new subnet but DDNS does not update BIND9. Since the device has A/TXT/PTR records it appears ISC-DHCP-SERVER won't switch them to the new IP. The logs show: Connect to wireless: Nov 6 20:55:13 core-server named[2417]: client 127.0.0.1#57697: updating zone 'internal.mydomain.com/IN': adding an RR at 'demo-iphone.internal.mydomain.com' A Nov 6 20:55:13 core-server named[2417]: client 127.0.0.1#57697: updating zone 'internal.mydomain.com/IN': adding an RR at 'demo-iphone.internal.mydomain.com' TXT Nov 6 20:55:13 core-server dhcpd: DHCPACK on 10.100.1.160 to FF:FF:FF:FF:FF:FF (demo-iphone) via eth0 Nov 6 20:55:13 core-server dhcpd: Added new forward map from demo-iphone.internal.mydomain.com to 10.100.1.160 Nov 6 20:55:13 core-server dhcpd: Added reverse map from 160.49.21.172.in-addr.arpa. to demo-iphone.internal.mydomain.com Switch to VPN: Nov 6 20:56:34 core-server dhcpd: DHCPOFFER on 10.100.7.101 to BB:BB:BB:BB:BB:BB (demo-iphone) via 10.100.7.0 Nov 6 20:56:34 core-server named[2417]: client 127.0.0.1#57697: updating zone 'internal.mydomain.com/IN': update unsuccessful: demo-iphone.internal.mydomain.com: 'name not in use' prerequisite not satisfied (YXDOMAIN) Nov 6 20:56:34 core-server dhcpd: DHCPREQUEST for 10.100.7.101 (10.100.1.2) from BB:BB:BB:BB:BB:BB (demo-iphone) via 10.100.7.0 Nov 6 20:56:34 core-server dhcpd: DHCPACK on 10.100.7.101 to BB:BB:BB:BB:BB:BB (demo-iphone) via 10.100.7.0 Nov 6 20:56:34 core-server named[2417]: client 127.0.0.1#57697: updating zone 'internal.mydomain.com/IN': update unsuccessful: demo-iphone.internal.mydomain.com/TXT: 'RRset exists (value dependent)' prerequisite not satisfied (NXRRSET) Nov 6 20:56:34 core-server dhcpd: Forward map from demo-iphone.internal.mydomain.com to 10.100.7.101 FAILED: Has an address record but no DHCID, not mine. One thing to note is that the MAC of the device when connecting via VPN is the MAC of my Cisco ASA5512X and not the actual device. The ASA is relaying the DHCP request from the VPN client to the VM running ISC-DHCP-SERVER. Is there a way to get DDNS working in this scenario?

    Read the article

  • Mod_Perl configuration for multiple domains

    - by daliaessam
    Reading the Mod_Perl module documentation, can we configure it on per domain basis, what I mean can we configure it to run on every domain or specific domain only. What I see in the docs is: Registry Scripts To enable registry scripts add to httpd.conf: Alias /perl/ /home/httpd/2.0/perl/ <Location /perl/> SetHandler perl-script PerlResponseHandler ModPerl::Registry PerlOptions +ParseHeaders Options +ExecCGI </Location> and now assuming that we have the following script: #!/usr/bin/perl print "Content-type: text/plain\n\n"; print "mod_perl 2.0 rocks!\n"; saved in /home/httpd/httpd-2.0/perl/rock.pl. Make the script executable and readable by everybody: % chmod a+rx /home/httpd/httpd-2.0/perl/rock.pl Of course the path to the script should be readable by the server too. In the real world you probably want to have a tighter permissions, but for the purpose of testing, that things are working, this is just fine. From what I understand above, we can run Perl scripts only from one specific folder that we put the directive above. So the question again, can we make this directive per domain for all domains or for specific number of domains?

    Read the article

  • SQL 2000 (MSDE) Hangs When It Receives an Erroneous Query from a Classic ASP Web Application

    - by Jimbo
    I have a SQL interface page in my classic ASP web app that allows admin users to run queries against the app's database (MSDE 2000) - it simply consists of a textarea that the user submits and the app returns the resulting list of records as below Dim oRS Set oRS = Server.CreateObject("ADODB.Recordset") oRS.ActiveConnection = sConnectionString // run the query - this is for the admin only so doesnt check for sql safe commands etc. oRS.Open Request.Form("txtSQL") If Not oRS.EOF Then // list the field names from the recordset For i = 0 to oRS.Fields.Count - 1 Response.Write oRS.Fields(i).name & "&nbsp;" Next // show the data for each record in the recordset While Not oRS.EOF For i = 0 to oRS.Fields.Count - 1 Response.Write oRS.Fields(i).value & "&nbsp;" Next Response.Write "<br />" oRS.Movenext() Wend End If The problem with this is that if you send it an invalid query (with a spelling mistake, invalid join etc.) instead of throwing back an error immediately, it hangs IIS (you can see this by trying to browse the app from another computer, it fails) for a number of minutes and THEN returns the error. I have NO idea why! Can anyone help?

    Read the article

  • Cisco ASA 5505 site to site IPSEC VPN won't route from multiple LANs

    - by franklundy
    Hi I've set up a standard site to site VPN between 2 ASA 5505s (using the wizard in ASDM) and have the VPN working fine for traffic between Site A and Site B on the directly connected LANs. But this VPN is actually to be used for data originating on LAN subnets that are one hop away from the directly connected LANs. So actually there is another router connected to each ASA (LAN side) that then route to two completely different LAN ranges, where the clients and servers reside. At the moment, any traffic that gets to the ASA that has not originated from the directly connected LAN gets sent straight to the default gateway, and not through the VPN. I've tried adding the additional subnets to the "Protected Networks" on the VPN, but that has no effect. I have also tried adding a static route to each ASA trying to point the traffic to the other side, but again this hasn't worked. Here is the config for one of the sites. This works for traffic to/from the 192.168.144.x subnets perfectly. What I need is to be able to route traffic from 10.1.0.0/24 to 10.2.0.0/24 for example. ASA Version 8.0(3) ! hostname Site1 enable password ** encrypted names name 192.168.144.4 Site2 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.144.2 255.255.255.252 ! interface Vlan2 nameif outside security-level 0 ip address 10.78.254.70 255.255.255.252 (this is a private WAN circuit) ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! passwd ** encrypted ftp mode passive access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_1_cryptomap extended permit ip 192.168.144.0 255.255.255.252 Site2 255.255.255.252 access-list inside_nat0_outbound extended permit ip 192.168.144.0 255.255.255.252 Site2 255.255.255.252 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-603.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 10.78.254.69 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute dynamic-access-policy-record DfltAccessPolicy aaa authentication ssh console LOCAL http server enable http 0.0.0.0 0.0.0.0 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer 10.78.254.66 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal telnet timeout 5 ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 console timeout 0 management-access inside threat-detection basic-threat threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list group-policy DfltGrpPolicy attributes vpn-idle-timeout none username enadmin password * encrypted privilege 15 tunnel-group 10.78.254.66 type ipsec-l2l tunnel-group 10.78.254.66 ipsec-attributes pre-shared-key * ! ! prompt hostname context

    Read the article

  • Apache httpd.conf handle multiple domains to run the same application

    - by John Stewart
    So what we are looking for is the ability to do the following: We have an application that can load certain settings based on the domain that it is being accessed from. So if you come from xyz.com we show a different logo and if you come from abc.com we show a different logo. The code is the same, running from same server just detects the domain on the run Now we want to get a dedicated server (any suggestions?) that will enable us to point all the doamins that we want to this server (we change the DNS for the domains to that of our server) and then when the user goes to a certain domain they run the same application. Now as far as I can understand we will need to create a "VirtualHost" in apache to handle this. Can we create a wildcard virtualhost that catches all the domains? I am not an expert with Apache at all. So please forgive if this comes out to be a silly question. Any detailed help would be great. Thanks

    Read the article

  • Multiple IPv6 addresses being assigned to single interface

    - by Steven Copestake
    I'm configuring a DHCP scope for IPv6, however all my clients are getting 2 or more IPv6 addresses assigned to the interface. I'm using fda8:6c3:ce53:a890:/64 as the prefix. The scope is on a machine running Windows Server 2008 R2 however I'm looking to roll it out on Server 2012 as well. My clients are getting the following: IPv6 Address. . . . . . . . . . . : 1024::1492:9288:7357:7d30(Preferred) IPv6 Address. . . . . . . . . . . : fda8:6c3:ce53:a890::1(Preferred) IPv6 Address. . . . . . . . . . . : fda8:6c3:ce53:a890:1492:9288:7357:7d30(Pr rred) Link-local IPv6 Address . . . . . : fe80::1492:9288:7357:7d30%10(Preferred) In this example there's no DHCP scope and the machine has a static IP of fda8:6c3:ce53:a890::1. With this in mind where are the 1024 address and the fda8:6c3:ce53:a890:1492:9288:7357:7d30 address coming from?

    Read the article

  • Global Address List, Multiple All Address Lists in CN=Address Lists Container

    - by Jonathan
    When my colleges (that was way before my time here) updated Exchange 2000 to 2003 a English All Address Lists appeared in addition to the German variant. The English All Address Lists have German titled GAL below it. This has just been a cosmetic problem for the last few years. Now as we are in the process of rolling out Exchange 2010 this causes some issues. Exchange 2010 picked the wrong i.e. English Address Lists Container to use. In ADSI Editor we see CN=All Address Lists,CN=Address Lists Container,CN=exchange org,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain and CN=Alle Adresslisten,CN=Address Lists Container,CN=exchange org,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain. In the addressBookRoots attribute of CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain both address lists were stored as values. We removed the English variant from addressBookRoots and restarted all (old and new) Exchange servers. User with mailboxes on the Exchange 2003 now only sees the German variant. Exchange 2010 is still stuck with the English/Mixed variant as are Users on Exchange 2010. Our goal would be to have Outlook display the German title of All Address Lists and get rid of the wrong Address Lists Container.

    Read the article

< Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >