Search Results

Search found 8323 results on 333 pages for 'execute'.

Page 322/333 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

• SQL SERVER – Weekly Series – Memory Lane – #038

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 CASE Statement in ORDER BY Clause – ORDER BY using Variable This article is as per request from the Application Development Team Leader of my company. His team encountered code where the application was preparing string for ORDER BY clause of the SELECT statement. Application was passing this string as variable to Stored Procedure (SP) and SP was using EXEC to execute the SQL string. This is not good for performance as Stored Procedure has to recompile every time due to EXEC. sp_executesql can do the same task but still not the best performance. SSMS – View/Send Query Results to Text/Grid/Files Results to Text – CTRL + T Results to Grid – CTRL + D Results to File – CTRL + SHIFT + F 2008 Introduction to SPARSE Columns Part 2 I wrote about Introduction to SPARSE Columns Part 1. Let us understand the concept of the SPARSE column in more detail. I suggest you read the first part before continuing reading this article. All SPARSE columns are stored as one XML column in the database. Let us see some of the advantage and disadvantage of SPARSE column. Deferred Name Resolution How come when table name is incorrect SP can be created successfully but when an incorrect column is used SP cannot be created? 2009 Backup Timeline and Understanding of Database Restore Process in Full Recovery Model In general, databases backup in full recovery mode is taken in three different kinds of database files. Full Database Backup Differential Database Backup Log Backup Restore Sequence and Understanding NORECOVERY and RECOVERY While doing RESTORE Operation if you restoring database files, always use NORECOVER option as that will keep the database in a state where more backup file are restored. This will also keep database offline also to prevent any changes, which can create itegrity issues. Once all backup file is restored run RESTORE command with a RECOVERY option to get database online and operational. Four Different Ways to Find Recovery Model for Database Perhaps, the best thing about technical domain is that most of the things can be executed in more than one ways. It is always useful to know about the various methods of performing a single task. Two Methods to Retrieve List of Primary Keys and Foreign Keys of Database When Information Schema is used, we will not be able to discern between primary key and foreign key; we will have both the keys together. In the case of sys schema, we can query the data in our preferred way and can join this table to another table, which can retrieve additional data from the same. Get Last Running Query Based on SPID PID is returns sessions ID of the current user process. The acronym SPID comes from the name of its earlier version, Server Process ID. 2010 SELECT * FROM dual – Dual Equivalent Dual is a table that is created by Oracle together with data dictionary. It consists of exactly one column named “dummy”, and one record. The value of that record is X. You can check the content of the DUAL table using the following syntax. SELECT * FROM dual Identifying Statistics Used by Query Someone asked this question in my training class of query optimization and performance tuning.  “Can I know which statistics were used by my query?” 2011 SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 14 of 31 What are the basic functions for master, msdb, model, tempdb and resource databases? What is the Maximum Number of Index per Table? Explain Few of the New Features of SQL Server 2008 Management Studio Explain IntelliSense for Query Editing Explain MultiServer Query Explain Query Editor Regions Explain Object Explorer Enhancements Explain Activity Monitors SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 15 of 31 What is Service Broker? Where are SQL server Usernames and Passwords Stored in the SQL server? What is Policy Management? What is Database Mirroring? What are Sparse Columns? What does TOP Operator Do? What is CTE? What is MERGE Statement? What is Filtered Index? Which are the New Data Types Introduced in SQL SERVER 2008? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 16 of 31 What are the Advantages of Using CTE? How can we Rewrite Sub-Queries into Simple Select Statements or with Joins? What is CLR? What are Synonyms? What is LINQ? What are Isolation Levels? What is Use of EXCEPT Clause? What is XPath? What is NOLOCK? What is the Difference between Update Lock and Exclusive Lock? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 17 of 31 How will you Handle Error in SQL SERVER 2008? What is RAISEERROR? What is RAISEERROR? How to Rebuild the Master Database? What is the XML Datatype? What is Data Compression? What is Use of DBCC Commands? How to Copy the Tables, Schema and Views from one SQL Server to Another? How to Find Tables without Indexes? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 18 of 31 How to Copy Data from One Table to Another Table? What is Catalog Views? What is PIVOT and UNPIVOT? What is a Filestream? What is SQLCMD? What do you mean by TABLESAMPLE? What is ROW_NUMBER()? What are Ranking Functions? What is Change Data Capture (CDC) in SQL Server 2008? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 19 of 31 How can I Track the Changes or Identify the Latest Insert-Update-Delete from a Table? What is the CPU Pressure? How can I Get Data from a Database on Another Server? What is the Bookmark Lookup and RID Lookup? What is Difference between ROLLBACK IMMEDIATE and WITH NO_WAIT during ALTER DATABASE? What is Difference between GETDATE and SYSDATETIME in SQL Server 2008? How can I Check that whether Automatic Statistic Update is Enabled or not? How to Find Index Size for Each Index on Table? What is the Difference between Seek Predicate and Predicate? What are Basics of Policy Management? What are the Advantages of Policy Management? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 20 of 31 What are Policy Management Terms? What is the ‘FILLFACTOR’? Where in MS SQL Server is ’100’ equal to ‘0’? What are Points to Remember while Using the FILLFACTOR Argument? What is a ROLLUP Clause? What are Various Limitations of the Views? What is a Covered index? When I Delete any Data from a Table, does the SQL Server reduce the size of that table? What are Wait Types? How to Stop Log File Growing too Big? If any Stored Procedure is Encrypted, then can we see its definition in Activity Monitor? 2012 Example of Width Sensitive and Width Insensitive Collation Width Sensitive Collation: A single-byte character (half-width) represented as single-byte and the same character represented as a double-byte character (full-width) are when compared are not equal the collation is width sensitive. In this example we have one table with two columns. One column has a collation of width sensitive and the second column has a collation of width insensitive. Find Column Used in Stored Procedure – Search Stored Procedure for Column Name Very interesting conversation about how to find column used in a stored procedure. There are two different characters in the story and both are having a conversation about how to find column in the stored procedure. Here are two part story Part 1 | Part 2 SQL SERVER – 2012 Functions – FORMAT() and CONCAT() – An Interesting Usage Generate Script for Schema and Data – SQL in Sixty Seconds #021 – Video In simple words, in many cases the database move from one place to another place. It is not always possible to back up and restore databases. There are possibilities when only part of the database (with schema and data) has to be moved. In this video we learn that we can easily generate script for schema for data and move from one server to another one. INFORMATION_SCHEMA.COLUMNS and Value Character Maximum Length -1 I often see the value -1 in the CHARACTER_MAXIMUM_LENGTH column of INFORMATION_SCHEMA.COLUMNS table. I understand that the length of any column can be between 0 to large number but I do not get it when I see value in negative (i.e. -1). Any insight on this subject? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Operator of the week - Assert

  - by Fabiano Amorim

  Well my friends, I was wondering how to help you in a practical way to understand execution plans. So I think I'll talk about the Showplan Operators. Showplan Operators are used by the Query Optimizer (QO) to build the query plan in order to perform a specified operation. A query plan will consist of many physical operators. The Query Optimizer uses a simple language that represents each physical operation by an operator, and each operator is represented in the graphical execution plan by an icon. I'll try to talk about one operator every week, but so as to avoid having to continue to write about these operators for years, I'll mention only of those that are more common: The first being the Assert. The Assert is used to verify a certain condition, it validates a Constraint on every row to ensure that the condition was met. If, for example, our DDL includes a check constraint which specifies only two valid values for a column, the Assert will, for every row, validate the value passed to the column to ensure that input is consistent with the check constraint. Assert  and Check Constraints: Let's see where the SQL Server uses that information in practice. Take the following T-SQL: IF OBJECT_ID('Tab1') IS NOT NULL   DROP TABLE Tab1 GO CREATE TABLE Tab1(ID Integer, Gender CHAR(1))  GO  ALTER TABLE TAB1 ADD CONSTRAINT ck_Gender_M_F CHECK(Gender IN('M','F'))  GO INSERT INTO Tab1(ID, Gender) VALUES(1,'X') GO To the command above the SQL Server has generated the following execution plan: As we can see, the execution plan uses the Assert operator to check that the inserted value doesn't violate the Check Constraint. In this specific case, the Assert applies the rule, 'if the value is different to "F" and different to "M" than return 0 otherwise returns NULL'. The Assert operator is programmed to show an error if the returned value is not NULL; in other words, the returned value is not a "M" or "F". Assert checking Foreign Keys Now let's take a look at an example where the Assert is used to validate a foreign key constraint. Suppose we have this  query: ALTER TABLE Tab1 ADD ID_Genders INT GO  IF OBJECT_ID('Tab2') IS NOT NULL   DROP TABLE Tab2 GO CREATE TABLE Tab2(ID Integer PRIMARY KEY, Gender CHAR(1))  GO  INSERT INTO Tab2(ID, Gender) VALUES(1, 'F') INSERT INTO Tab2(ID, Gender) VALUES(2, 'M') INSERT INTO Tab2(ID, Gender) VALUES(3, 'N') GO  ALTER TABLE Tab1 ADD CONSTRAINT fk_Tab2 FOREIGN KEY (ID_Genders) REFERENCES Tab2(ID) GO  INSERT INTO Tab1(ID, ID_Genders, Gender) VALUES(1, 4, 'X') Let's look at the text execution plan to see what these Assert operators were doing. To see the text execution plan just execute SET SHOWPLAN_TEXT ON before run the insert command. |--Assert(WHERE:(CASE WHEN NOT [Pass1008] AND [Expr1007] IS NULL THEN (0) ELSE NULL END))      |--Nested Loops(Left Semi Join, PASSTHRU:([Tab1].[ID_Genders] IS NULL), OUTER REFERENCES:([Tab1].[ID_Genders]), DEFINE:([Expr1007] = [PROBE VALUE]))           |--Assert(WHERE:(CASE WHEN [Tab1].[Gender]<>'F' AND [Tab1].[Gender]<>'M' THEN (0) ELSE NULL END))           |    |--Clustered Index Insert(OBJECT:([Tab1].[PK]), SET:([Tab1].[ID] = RaiseIfNullInsert([@1]),[Tab1].[ID_Genders] = [@2],[Tab1].[Gender] = [Expr1003]), DEFINE:([Expr1003]=CONVERT_IMPLICIT(char(1),[@3],0)))           |--Clustered Index Seek(OBJECT:([Tab2].[PK]), SEEK:([Tab2].[ID]=[Tab1].[ID_Genders]) ORDERED FORWARD) Here we can see the Assert operator twice, first (looking down to up in the text plan and the right to left in the graphical plan) validating the Check Constraint. The same concept showed above is used, if the exit value is "0" than keep running the query, but if NULL is returned shows an exception. The second Assert is validating the result of the Tab1 and Tab2 join. It is interesting to see the "[Expr1007] IS NULL". To understand that you need to know what this Expr1007 is, look at the Probe Value (green text) in the text plan and you will see that it is the result of the join. If the value passed to the INSERT at the column ID_Gender exists in the table Tab2, then that probe will return the join value; otherwise it will return NULL. So the Assert is checking the value of the search at the Tab2; if the value that is passed to the INSERT is not found  then Assert will show one exception. If the value passed to the column ID_Genders is NULL than the SQL can't show a exception, in that case it returns "0" and keeps running the query. If you run the INSERT above, the SQL will show an exception because of the "X" value, but if you change the "X" to "F" and run again, it will show an exception because of the value "4". If you change the value "4" to NULL, 1, 2 or 3 the insert will be executed without any error. Assert checking a SubQuery: The Assert operator is also used to check one subquery. As we know, one scalar subquery can't validly return more than one value: Sometimes, however, a  mistake happens, and a subquery attempts to return more than one value . Here the Assert comes into play by validating the condition that a scalar subquery returns just one value. Take the following query: INSERT INTO Tab1(ID_TipoSexo, Sexo) VALUES((SELECT ID_TipoSexo FROM Tab1), 'F')    INSERT INTO Tab1(ID_TipoSexo, Sexo) VALUES((SELECT ID_TipoSexo FROM Tab1), 'F')    |--Assert(WHERE:(CASE WHEN NOT [Pass1016] AND [Expr1015] IS NULL THEN (0) ELSE NULL END))        |--Nested Loops(Left Semi Join, PASSTHRU:([tempdb].[dbo].[Tab1].[ID_TipoSexo] IS NULL), OUTER REFERENCES:([tempdb].[dbo].[Tab1].[ID_TipoSexo]), DEFINE:([Expr1015] = [PROBE VALUE]))              |--Assert(WHERE:([Expr1017]))             |    |--Compute Scalar(DEFINE:([Expr1017]=CASE WHEN [tempdb].[dbo].[Tab1].[Sexo]<>'F' AND [tempdb].[dbo].[Tab1].[Sexo]<>'M' THEN (0) ELSE NULL END))              |         |--Clustered Index Insert(OBJECT:([tempdb].[dbo].[Tab1].[PK__Tab1__3214EC277097A3C8]), SET:([tempdb].[dbo].[Tab1].[ID_TipoSexo] = [Expr1008],[tempdb].[dbo].[Tab1].[Sexo] = [Expr1009],[tempdb].[dbo].[Tab1].[ID] = [Expr1003]))              |              |--Top(TOP EXPRESSION:((1)))              |                   |--Compute Scalar(DEFINE:([Expr1008]=[Expr1014], [Expr1009]='F'))              |                        |--Nested Loops(Left Outer Join)              |                             |--Compute Scalar(DEFINE:([Expr1003]=getidentity((1856985942),(2),NULL)))              |                             |    |--Constant Scan              |                             |--Assert(WHERE:(CASE WHEN [Expr1013]>(1) THEN (0) ELSE NULL END))              |                                  |--Stream Aggregate(DEFINE:([Expr1013]=Count(*), [Expr1014]=ANY([tempdb].[dbo].[Tab1].[ID_TipoSexo])))             |                                       |--Clustered Index Scan(OBJECT:([tempdb].[dbo].[Tab1].[PK__Tab1__3214EC277097A3C8]))              |--Clustered Index Seek(OBJECT:([tempdb].[dbo].[Tab2].[PK__Tab2__3214EC27755C58E5]), SEEK:([tempdb].[dbo].[Tab2].[ID]=[tempdb].[dbo].[Tab1].[ID_TipoSexo]) ORDERED FORWARD)  You can see from this text showplan that SQL Server as generated a Stream Aggregate to count how many rows the SubQuery will return, This value is then passed to the Assert which then does its job by checking its validity. Is very interesting to see that  the Query Optimizer is smart enough be able to avoid using assert operators when they are not necessary. For instance: INSERT INTO Tab1(ID_TipoSexo, Sexo) VALUES((SELECT ID_TipoSexo FROM Tab1 WHERE ID = 1), 'F') INSERT INTO Tab1(ID_TipoSexo, Sexo) VALUES((SELECT TOP 1 ID_TipoSexo FROM Tab1), 'F')  For both these INSERTs, the Query Optimiser is smart enough to know that only one row will ever be returned, so there is no need to use the Assert. Well, that's all folks, I see you next week with more "Operators". Cheers, Fabiano

  Read the article

• Visual Studio 2010 Productivity Tips and Tricks-Part 2: Key Shortcuts

  - by ToStringTheory

  Ask anyone that knows me, and they will confirm that I hate the mouse.  This isn’t because I deny affection to objects that don’t look like their mammalian-named self, but rather for a much more simple and not-insane reason: I have terrible eyesight.  Introduction Thanks to a degenerative eye disease known as Choroideremia, I have learned to rely more on the keyboard which I can feel digital/static positions of keys relative to my fingers, than the much more analog/random position of the mouse.  Now, I would like to share some of the keyboard shortcuts with you now, as I believe that they not only increase my productivity, but yours as well once you know them (if you don’t already of course)...  I share one of my biggest tips for productivity in the conclusion at the end. Visual Studio Key Shortcuts Global Editor Shortcuts These are shortcuts that are available from almost any application running in Windows, however are many times forgotten. Shortcut Action Visual Studio 2010 Functionality Ctrl + X Cut This shortcut works without a selection. If nothing is selected, the entire line that the caret is on is cut from the editor. Ctrl + C Copy This shortcut works without a selection. If nothing is selected, the entire line that the caret is on is copied from the editor. Ctrl + V Paste If you copied an entire line by the method above, the data is pasted in the line above the current caret line. Ctrl + Shift + V Next Clipboard Element Cut/Copy multiple things, and then hit this combo repeatedly to switch to the next clipboard item when pasting. Ctrl + Backspace Delete Previous Will delete the previous word from the editor directly before the caret. If anything is selected, will just delete that. Ctrl + Del Delete Next Word Will delete the next word/space from the editor directly after the caret. If anything is selected, will just delete that. Shift + Del Delete Focused Line Will delete the line from the editor that the caret is on. If something is selected, will just delete that. Ctrl + ? or Ctrl + ? Left/Right by Word This will move the caret left or right by word or special character boundary. Holding Shift will also select the word. Ctrl + F Quick Find Either the Quick Find panel, or the search bar if you have the Productivity Power Tools installed. Ctrl + Shift + F Find in Solution Opens up the 'Find in Files' window, allowing you to search your solution, as well as using regex for pattern matching. F2 Rename File... While not debugging, selecting a file in the solution explorer\navigator and pressing F2 allows you to rename the selected file. Global Application Shortcuts These are shortcuts that are available from almost any application running in Windows, however are many times forgotten... Again... Shortcut Action Visual Studio 2010 Functionality Ctrl + N New File dialog Opens up the 'New File' dialog to add a new file to the current directory in the Solution\Project. Ctrl + O Open File dialog Opens up the 'Open File' dialog to open a file in the editor, not necessarily in the solution. Ctrl + S Save File dialog Saves the currently focused editor tab back to your HDD/SSD. Ctrl + Shift + S Save All... Quickly save all open/edited documents back to your disk. Ctrl + Tab Switch Panel\Tab Tapping this combo switches between tabs quickly. Holding down Ctrl when hitting tab will bring up a chooser window. Building Shortcuts These are shortcuts that are focused on building and running a solution. These are not usable when the IDE is in Debug mode, as the shortcut changes by context. Shortcut Action Visual Studio 2010 Functionality Ctrl + Shift + B Build Solution Starts a build process on the solution according to the current build configuration manager settings. Ctrl + Break Cancel a Building Solution Will cancel a build operation currently in progress. Good for long running builds when you think of one last change. F5 Start Debugging Will build the solution if needed and launch debugging according to the current configuration manager settings. Ctrl + F5 Start Without Debugger Will build the solution if needed and launch the startup project without attaching a debugger. Debugging Shortcuts These are shortcuts that are used when debugging a solution. Shortcut Action Visual Studio 2010 Functionality F5 Continue Execution Continues execution of code until the next breakpoint. Ctrl + Alt + Break Pause Execution Pauses the program execution. Shift + F5 Stop Debugging Stops the current debugging session. NOTE: Web apps will still continue processing after stopping the debugger. Keep this in mind if working on code such as credit card processing. Ctrl + Shift + F5 Restart Debugging Stops the current debugging session and restarts the debugging session from the beginning. F9 Place Breakpoint Toggles/Places a breakpoint in the editor on the current line. Set a breakpoint in condensed code by highlighting the statement first. F10 Step Over Statement When debugging, executes all code in methods/properties on the current line until the next line. F11 Step Into Statement When debugging, steps into a method call so you can walk through the code executed there (if available). Ctrl + Alt + I Immediate Window Open the Immediate Window to execute commands when execution is paused. Navigation Shortcuts These are shortcuts that are used for navigating in the IDE or editor panel. Shortcut Action Visual Studio 2010 Functionality F4 Properties Panel Opens the properties panel for the selected item in the editor/designer/solution navigator (context driven). F12 Go to Definition Press F12 with the caret on a member to navigate to its declaration. With the Productivity tools, Ctrl + Click works too. Ctrl + K Ctrl + T View Call Hierarchy View the call hierarchy of the member the caret is on. Great for going through n-tier solutions and interface implementations! Ctrl + Alt + B Breakpoint Window View the breakpoint window to manage breakpoints and their advanced options. Allows easy toggling of breakpoints. Ctrl + Alt + L Solution Navigator Open the solution explorer panel. Ctrl + Alt + O Output Window View the output window to see build\general output from Visual Studio. Ctrl + Alt + Enter Live Web Preview Only available with the Web Essential plugin. Launches the auto-updating Preview panel. Testing Shortcuts These are shortcuts that are used for running tests in the IDE. Please note, Visual Studio 2010 is all about context. If your caret is within a test method when you use one of these combinations, the combination will apply to that test. If your caret is within a test class, it will apply to that class. If the caret is outside of a test class, it will apply to all tests. Shortcut Action Visual Studio 2010 Functionality Ctrl + R T Run Test(s) Run all tests in the current context without a debugger attached. Breakpoints will not be stopped on. Ctrl + R Ctrl + T Run Test(s) (Debug) Run all tests in the current context with a debugger attached. This allows you to use breakpoints. Substitute A for T from the preceding combos to run/debug ALL tests in the current context. Substitute Y for T from the preceding combos to run/debug ALL impacted/covering tests for a method in the current context. Advanced Editor Shortcuts These are shortcuts that are used for more advanced editing in the editor window. Shortcut Action Visual Studio 2010 Functionality Shift + Alt + ? Shift + Alt + ? Multiline caret up/down Use this combo to edit multiple lines at once. Not too many uses for it, but once in a blue moon one comes along. Ctrl + Alt + Enter Insert Line Above Inserts a blank line above the line the caret is currently on. No need to be at end or start of line, so no cutting off words/code. Ctrl + K Ctrl + C Comment Selection Comments the current selection out of compilation. Ctrl + K Ctrl + U Uncomment Selection Uncomments the current selection into compilation. Ctrl + K Ctrl + D Format Document Automatically formats the document into a structured layout. Lines up nodes or code into columns intelligently. Alt + ? Alt + ? Code line up/down *Use this combo to move a line of code up or down quickly. Great for small rearrangements of code. *Requires the Productivity Power pack from Microsoft. Conclusion This list is by no means meant to be exhaustive, but these are the shortcuts I use regularly every hour/minute of the day. There are still 100s more in Visual Studio that you can discover through the configuration window, or by tooltips. Something that I started doing months ago seems to have interest in my office.. In my last post, I talked about how I hated a cluttered UI. One of the ways that I aimed to resolve that was by systematically cleaning up the toolbars week by week. First day, I removed ALL icons that I already knew shortcuts to, or would never use them (Undo in a toolbar?!). Then, every week from that point on, I make it a point to remove an icon/two from the toolbar and make an effort to remember its key combination. I gain extra space in the toolbar area, AND become more productive at the same time! I hope that you found this article interesting or at least somewhat informative.. Maybe a shortcut or two you didn't know. I know some of them seem trivial, but I often see people going to the edit menu for Copy/Paste... Thought a refresher might be helpful!

  Read the article

• Ajax-based data loading using jQuery.load() function in ASP.NET

  - by hajan

  In general, jQuery has made Ajax very easy by providing low-level interface, shorthand methods and helper functions, which all gives us great features of handling Ajax requests in our ASP.NET Webs. The simplest way to load data from the server and place the returned HTML in browser is to use the jQuery.load() function. The very firs time when I started playing with this function, I didn't believe it will work that much easy. What you can do with this method is simply call given url as parameter to the load function and display the content in the selector after which this function is chained. So, to clear up this, let me give you one very simple example: $("#result").load("AjaxPages/Page.html"); As you can see from the above image, after clicking the ‘Load Content’ button which fires the above code, we are making Ajax Get and the Response is the entire page HTML. So, rather than using (old) iframes, you can now use this method to load other html pages inside the page from where the script with load function is called. This method is equivalent to the jQuery Ajax Get method $.get(url, data, function () { }) only that the $.load() is method rather than global function and has an implicit callback function. To provide callback to your load, you can simply add function as second parameter, see example: $("#result").load("AjaxPages/Page.html", function () { alert("Page.html has been loaded successfully!") }); Since load is part of the chain which is follower of the given jQuery Selector where the content should be loaded, it means that the $.load() function won't execute if there is no such selector found within the DOM. Another interesting thing to mention, and maybe you've asked yourself is how we know if GET or POST method type is executed? It's simple, if we provide 'data' as second parameter to the load function, then POST is used, otherwise GET is assumed. POST $("#result").load("AjaxPages/Page.html", { "name": "hajan" }, function () { ////callback function implementation });   GET $("#result").load("AjaxPages/Page.html", function () { ////callback function implementation });   Another important feature that $.load() has ($.get() does not) is loading page fragments. Using jQuery's selector capability, you can do this: $("#result").load("AjaxPages/Page.html #resultTable"); In our Page.html, the content now is: So, after the call, only the table with id resultTable will load in our page.   As you can see, we have loaded only the table with id resultTable (1) inside div with id result (2). This is great feature since we won't need to filter the returned HTML content again in our callback function on the master page from where we have called $.load() function. Besides the fact that you can simply call static HTML pages, you can also use this function to load dynamic ASPX pages or ASP.NET ASHX Handlers . Lets say we have another page (ASPX) in our AjaxPages folder with name GetProducts.aspx. This page has repeater control (or anything you want to bind dynamic server-side content) that displays set of data in it. Now, I want to filter the data in the repeater based on the Query String parameter provided when calling that page. For example, if I call the page using GetProducts.aspx?category=computers, it will load only computers… so, this will filter the products automatically by given category. The example ASPX code of GetProducts.aspx page is: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="GetProducts.aspx.cs" Inherits="WebApplication1.AjaxPages.GetProducts" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <table id="tableProducts"> <asp:Repeater ID="rptProducts" runat="server"> <HeaderTemplate> <tr> <th>Product</th> <th>Price</th> <th>Category</th> </tr> </HeaderTemplate> <ItemTemplate> <tr> <td> <%# Eval("ProductName")%> </td> <td> <%# Eval("Price") %> </td> <td> <%# Eval("Category") %> </td> </tr> </ItemTemplate> </asp:Repeater> </ul> </div> </form> </body> </html> The C# code-behind sample code is: public partial class GetProducts : System.Web.UI.Page { public List<Product> products; protected override void OnInit(EventArgs e) { LoadSampleProductsData(); //load sample data base.OnInit(e); } protected void Page_Load(object sender, EventArgs e) { if (Request.QueryString.Count > 0) { if (!string.IsNullOrEmpty(Request.QueryString["category"])) { string category = Request.QueryString["category"]; //get query string into string variable //filter products sample data by category using LINQ //and add the collection as data source to the repeater rptProducts.DataSource = products.Where(x => x.Category == category); rptProducts.DataBind(); //bind repeater } } } //load sample data method public void LoadSampleProductsData() { products = new List<Product>(); products.Add(new Product() { Category = "computers", Price = 200, ProductName = "Dell PC" }); products.Add(new Product() { Category = "shoes", Price = 90, ProductName = "Nike" }); products.Add(new Product() { Category = "shoes", Price = 66, ProductName = "Adidas" }); products.Add(new Product() { Category = "computers", Price = 210, ProductName = "HP PC" }); products.Add(new Product() { Category = "shoes", Price = 85, ProductName = "Puma" }); } } //sample Product class public class Product { public string ProductName { get; set; } public decimal Price { get; set; } public string Category { get; set; } } Mainly, I just have sample data loading function, Product class and depending of the query string, I am filtering the products list using LINQ Where statement. If we run this page without query string, it will show no data. If we call the page with category query string, it will filter automatically. Example: /AjaxPages/GetProducts.aspx?category=shoes The result will be: or if we use category=computers, like this /AjaxPages/GetProducts.aspx?category=computers, the result will be: So, now using jQuery.load() function, we can call this page with provided query string parameter and load appropriate content… The ASPX code in our Default.aspx page, which will call the AjaxPages/GetProducts.aspx page using jQuery.load() function is: <asp:RadioButtonList ID="rblProductCategory" runat="server"> <asp:ListItem Text="Shoes" Value="shoes" Selected="True" /> <asp:ListItem Text="Computers" Value="computers" /> </asp:RadioButtonList> <asp:Button ID="btnLoadProducts" runat="server" Text="Load Products" /> <!-- Here we will load the products, based on the radio button selection--> <div id="products"></div> </form> The jQuery code: $("#<%= btnLoadProducts.ClientID %>").click(function (event) { event.preventDefault(); //preventing button's default behavior var selectedRadioButton = $("#<%= rblProductCategory.ClientID %> input:checked").val(); //call GetProducts.aspx with the category query string for the selected category in radio button list //filter and get only the #tableProducts content inside #products div $("#products").load("AjaxPages/GetProducts.aspx?category=" + selectedRadioButton + " #tableProducts"); }); The end result: You can download the code sample from here. You can read more about jQuery.load() function here. I hope this was useful blog post for you. Please do let me know your feedback. Best Regards, Hajan

  Read the article

• C#: Why Decorate When You Can Intercept

  - by James Michael Hare

  We've all heard of the old Decorator Design Pattern (here) or used it at one time or another either directly or indirectly.  A decorator is a class that wraps a given abstract class or interface and presents the same (or a superset) public interface but "decorated" with additional functionality.   As a really simplistic example, consider the System.IO.BufferedStream, it itself is a descendent of System.IO.Stream and wraps the given stream with buffering logic while still presenting System.IO.Stream's public interface:   1: Stream buffStream = new BufferedStream(rawStream); Now, let's take a look at a custom-code example.  Let's say that we have a class in our data access layer that retrieves a list of products from a database:  1: // a class that handles our CRUD operations for products 2: public class ProductDao 3: { 4: ... 5:  6: // a method that would retrieve all available products 7: public IEnumerable<Product> GetAvailableProducts() 8: { 9: var results = new List<Product>(); 10:  11: // must create the connection 12: using (var con = _factory.CreateConnection()) 13: { 14: con.ConnectionString = _productsConnectionString; 15: con.Open(); 16:  17: // create the command 18: using (var cmd = _factory.CreateCommand()) 19: { 20: cmd.Connection = con; 21: cmd.CommandText = _getAllProductsStoredProc; 22: cmd.CommandType = CommandType.StoredProcedure; 23:  24: // get a reader and pass back all results 25: using (var reader = cmd.ExecuteReader()) 26: { 27: while(reader.Read()) 28: { 29: results.Add(new Product 30: { 31: Name = reader["product_name"].ToString(), 32: ... 33: }); 34: } 35: } 36: } 37: }            38:  39: return results; 40: } 41: } Yes, you could use EF or any myriad other choices for this sort of thing, but the germaine point is that you have some operation that takes a non-trivial amount of time.  What if, during the production day I notice that my application is performing slowly and I want to see how much of that slowness is in the query versus my code.  Well, I could easily wrap the logic block in a System.Diagnostics.Stopwatch and log the results to log4net or other logging flavor of choice: 1:     // a class that handles our CRUD operations for products 2:     public class ProductDao 3:     { 4:         private static readonly ILog _log = LogManager.GetLogger(typeof(ProductDao)); 5:         ... 6:         7:         // a method that would retrieve all available products 8:         public IEnumerable<Product> GetAvailableProducts() 9:         { 10:             var results = new List<Product>(); 11:             var timer = Stopwatch.StartNew(); 12:             13:             // must create the connection 14:             using (var con = _factory.CreateConnection()) 15:             { 16:                 con.ConnectionString = _productsConnectionString; 17:                 18:                 // and all that other DB code... 19:                 ... 20:             } 21:             22:             timer.Stop(); 23:             24:             if (timer.ElapsedMilliseconds > 5000) 25:             { 26:                 _log.WarnFormat("Long query in GetAvailableProducts() took {0} ms", 27:                     timer.ElapsedMillseconds); 28:             } 29:             30:             return results; 31:         } 32:     } In my eye, this is very ugly.  It violates Single Responsibility Principle (SRP), which says that a class should only ever have one responsibility, where responsibility is often defined as a reason to change.  This class (and in particular this method) has two reasons to change: If the method of retrieving products changes. If the method of logging changes. Well, we could “simplify” this using the Decorator Design Pattern (here).  If we followed the pattern to the letter, we'd need to create a base decorator that implements the DAOs public interface and forwards to the wrapped instance.  So let's assume we break out the ProductDAO interface into IProductDAO using your refactoring tool of choice (Resharper is great for this). Now, ProductDao will implement IProductDao and get rid of all logging logic: 1:     public class ProductDao : IProductDao 2:     { 3:         // this reverts back to original version except for the interface added 4:     } 5:  And we create the base Decorator that also implements the interface and forwards all calls: 1:     public class ProductDaoDecorator : IProductDao 2:     { 3:         private readonly IProductDao _wrappedDao; 4:         5:         // constructor takes the dao to wrap 6:         public ProductDaoDecorator(IProductDao wrappedDao) 7:         { 8:             _wrappedDao = wrappedDao; 9:         } 10:         11:         ... 12:         13:         // and then all methods just forward their calls 14:         public IEnumerable<Product> GetAvailableProducts() 15:         { 16:             return _wrappedDao.GetAvailableProducts(); 17:         } 18:     } This defines our base decorator, then we can create decorators that add items of interest, and for any methods we don't decorate, we'll get the default behavior which just forwards the call to the wrapper in the base decorator: 1:     public class TimedThresholdProductDaoDecorator : ProductDaoDecorator 2:     { 3:         private static readonly ILog _log = LogManager.GetLogger(typeof(TimedThresholdProductDaoDecorator)); 4:         5:         public TimedThresholdProductDaoDecorator(IProductDao wrappedDao) : 6:             base(wrappedDao) 7:         { 8:         } 9:         10:         ... 11:         12:         public IEnumerable<Product> GetAvailableProducts() 13:         { 14:             var timer = Stopwatch.StartNew(); 15:             16:             var results = _wrapped.GetAvailableProducts(); 17:             18:             timer.Stop(); 19:             20:             if (timer.ElapsedMilliseconds > 5000) 21:             { 22:                 _log.WarnFormat("Long query in GetAvailableProducts() took {0} ms", 23:                     timer.ElapsedMillseconds); 24:             } 25:             26:             return results; 27:         } 28:     } Well, it's a bit better.  Now the logging is in its own class, and the database logic is in its own class.  But we've essentially multiplied the number of classes.  We now have 3 classes and one interface!  Now if you want to do that same logging decorating on all your DAOs, imagine the code bloat!  Sure, you can simplify and avoid creating the base decorator, or chuck it all and just inherit directly.  But regardless all of these have the problem of tying the logging logic into the code itself. Enter the Interceptors.  Things like this to me are a perfect example of when it's good to write an Interceptor using your class library of choice.  Sure, you could design your own perfectly generic decorator with delegates and all that, but personally I'm a big fan of Castle's Dynamic Proxy (here) which is actually used by many projects including Moq. What DynamicProxy allows you to do is intercept calls into any object by wrapping it with a proxy on the fly that intercepts the method and allows you to add functionality.  Essentially, the code would now look like this using DynamicProxy: 1: // Note: I like hiding DynamicProxy behind the scenes so users 2: // don't have to explicitly add reference to Castle's libraries. 3: public static class TimeThresholdInterceptor 4: { 5: // Our logging handle 6: private static readonly ILog _log = LogManager.GetLogger(typeof(TimeThresholdInterceptor)); 7:  8: // Handle to Castle's proxy generator 9: private static readonly ProxyGenerator _generator = new ProxyGenerator(); 10:  11: // generic form for those who prefer it 12: public static object Create<TInterface>(object target, TimeSpan threshold) 13: { 14: return Create(typeof(TInterface), target, threshold); 15: } 16:  17: // Form that uses type instead 18: public static object Create(Type interfaceType, object target, TimeSpan threshold) 19: { 20: return _generator.CreateInterfaceProxyWithTarget(interfaceType, target, 21: new TimedThreshold(threshold, level)); 22: } 23:  24: // The interceptor that is created to intercept the interface calls. 25: // Hidden as a private inner class so not exposing Castle libraries. 26: private class TimedThreshold : IInterceptor 27: { 28: // The threshold as a positive timespan that triggers a log message. 29: private readonly TimeSpan _threshold; 30:  31: // interceptor constructor 32: public TimedThreshold(TimeSpan threshold) 33: { 34: _threshold = threshold; 35: } 36:  37: // Intercept functor for each method invokation 38: public void Intercept(IInvocation invocation) 39: { 40: // time the method invocation 41: var timer = Stopwatch.StartNew(); 42:  43: // the Castle magic that tells the method to go ahead 44: invocation.Proceed(); 45:  46: timer.Stop(); 47:  48: // check if threshold is exceeded 49: if (timer.Elapsed > _threshold) 50: { 51: _log.WarnFormat("Long execution in {0} took {1} ms", 52: invocation.Method.Name, 53: timer.ElapsedMillseconds); 54: } 55: } 56: } 57: } Yes, it's a bit longer, but notice that: This class ONLY deals with logging long method calls, no DAO interface leftovers. This class can be used to time ANY class that has an interface or virtual methods. Personally, I like to wrap and hide the usage of DynamicProxy and IInterceptor so that anyone who uses this class doesn't need to know to add a Castle library reference.  As far as they are concerned, they're using my interceptor.  If I change to a new library if a better one comes along, they're insulated. Now, all we have to do to use this is to tell it to wrap our ProductDao and it does the rest: 1: // wraps a new ProductDao with a timing interceptor with a threshold of 5 seconds 2: IProductDao dao = TimeThresholdInterceptor.Create<IProductDao>(new ProductDao(), 5000); Automatic decoration of all methods!  You can even refine the proxy so that it only intercepts certain methods. This is ideal for so many things.  These are just some of the interceptors we've dreamed up and use: Log parameters and returns of methods to XML for auditing. Block invocations to methods and return default value (stubbing). Throw exception if certain methods are called (good for blocking access to deprecated methods). Log entrance and exit of a method and the duration. Log a message if a method takes more than a given time threshold to execute. Whether you use DynamicProxy or some other technology, I hope you see the benefits this adds.  Does it completely eliminate all need for the Decorator pattern?  No, there may still be cases where you want to decorate a particular class with functionality that doesn't apply to the world at large. But for all those cases where you are using Decorator to add functionality that's truly generic.  I strongly suggest you give this a try!

  Read the article

• CodePlex Daily Summary for Saturday, October 12, 2013

  CodePlex Daily Summary for Saturday, October 12, 2013Popular ReleasesTerrariViewer: TerrariViewer v7 [Terraria Inventory Editor]: This is a complete overhaul but has the same core style. I hope you enjoy it. This version is compatible with 1.2.0.3 Please send issues to my Twitter or https://github.com/TJChap2840WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.6.maint: I think this covers all of the issues. new additions: fixed the thumbnail problem for backgrounds. general clean up and error checking. need to get this put through the wringer and all feedback is welcome.Free language translator and file converter: Free Language Translator 3.4: fixe for new version look up.MoreTerra (Terraria World Viewer): MoreTerra 1.11.3: =========== =New Features= =========== New Markers added for Plantera's Bulb, Heart Fruits and Gold Cache. Markers now correctly display for the gems found in rock debris on the floor. =========== =Compatibility= =========== Fixed header changes found in Terraria 1.0.3.1C# Intellisense for Notepad++: Release v1.0.8.0: - fixed document formatting artifacts To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.8.0: - fixed document formatting artifacts To avoid the DLLs getting locked by OS use MSI file for the installation.Generic Unit of Work and Repositories Framework: v2.0: Async methods for Repostiories - Ivan (@ifarkas) OData Async - Ivan (@ifarkas) Glimpse MVC4 workig with MVC5 Glimpse EF6 Northwind.Repostiory Project (layer) best practices for extending the Repositories Northwind.Services Project (layer), best practices for implementing business facade Live Demo: http://longle.azurewebsites.net/Spa/Product#/list Documentation: http://blog.longle.net/2013/10/09/upgrading-to-async-with-entity-framework-mvc-odata-asyncentitysetcontroller-kendo-ui-gli...Media Companion: Media Companion MC3.581b: Fix in place for TVDB xml issue. New* Movie - General Preferences, allow saving of ignored 'The' or 'A' to end of movie title, stored in sorttitle field. * Movie - New Way for Cropping Posters. Fixed* Movie - Rename of folders/filename. caught error message. * Movie - Fixed Bug in Save Cropped image, only saving in Pre-Frodo format if Both model selected. * Movie - Fixed Cropped image didn't take zoomed ratio into effect. * Movie - Separated Folder Renaming and File Renaming fuctions durin...Ghostscript.NET: Ghostscript.NET v.1.1.1.: v.1.1.1. fixed problem in GhostscriptRasterizer and GhostscriptViewer when MediaBox contains negative llx or lly values. (problem reported by "Prasenjit Das"). added GhostscriptPngDevice, a friendly output device class with all png devices related switches. (GhostscriptPngDevice supports: png16m, pngalpha, pnggray, png256, png16, pngmono, pngmonod). added GhostscriptJpegDevice, a friendly output device class with all jpeg devices related switches. (GhostscriptJpegDevice supports: jpeg, jp...(Party) DJ Player: DJP.124.12: 124.12 (Feature implementation completed): Changed datatype of HistoryDateInfo from string to DateTime New: HistoryDateInfoConverter for the listbox Improved: HistoryDateInfoDeleter, HistoryDateInfoLoader, HistoryDateInfoAsynchronizer, HistoryItemLoader, HistoryItemsToHistoryDateInfoConverterSmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.0: HighlightsMulti-store support "Trusted Shops" plugins Highly improved SmartStore.biz Importer plugin Add custom HTML content to pages Performance optimization New FeaturesMulti-store-support: now multiple stores can be managed within a single application instance (e.g. for building different catalogs, brands, landing pages etc.) Added 3 new Trusted Shops plugins: Seal, Buyer Protection, Store Reviews Added Display as HTML Widget to CMS Topics (store owner now can add arbitrary HT...Fast YouTube Downloader: Youtube Downloader 2.1: Youtube Downloader 2.1NuGet: NuGet 2.7.1: Released October 07, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.7.1 Important note: After downloading the signed build of NuGet.exe, if you perform an update using the "nuget.exe update -self" command, it will revert back to the unsigned build.Mugen MVVM Toolkit: Mugen MVVM Toolkit 2.0: IntroductionMugen MVVM Toolkit makes it easier to develop Silverlight, WPF, WinRT and WP applications using the Model-View-ViewModel design pattern. The purpose of the toolkit is to provide a simple framework and set of tools for getting up to speed quickly with applications based on the MVVM design pattern. The core of Toolkit contains a navigation system, windows management system, models, validation, etc. Mugen MVVM Toolkit contains all the MVVM classes such as ViewModelBase, RelayCommand,...Office Ribbon Project (under active development): Ribbon (07. Oct. 2013): Fixed Scrollbar Bug if DropDown Button is bigger than screen Added Office 2013 Theme Fixed closing the Ribbon caused a null reference exception in the RibbonButton.Dispose if the DropDown was not created yet Fixed Memory leak fix (unhooked events after Dispose) Fixed ToolStrip Selected Text 2013 and 2007 for Blue and Standard themesGhostscript Studio: Ghostscript.Studio v.1.0.2: Ghostscript Studio is easy to use Ghostscript IDE, a tool that facilitates the use of the Ghostscript interpreter by providing you with a graphical interface for postscript editing and file conversions. Ghostscript Studio allows you to preview postscript files, edit the code and execute them in order to convert PDF documents and other formats. The program allows you to convert between PDF, Postscript, EPS, TIFF, JPG and PNG by using the Ghostscript.NET Processor. v.1.0.2. added custom -c s...Squiggle - A free open source LAN Messenger: Squiggle 3.3 Alpha: Allow using environment variables in configuration file (history db connection string, download folder location, display name, group and message) Fix for history viewer to show the correct history entries History saved with UTC timestamp This is alpha release and not recommended for use in productionVidCoder: 1.5.7 Beta: Updated HandBrake core to SVN 5819. About dialog now pulls down HandBrake version from the DLL. Added a confirmation dialog to Stop if the encode has been going on for more than 5 minutes. Fixed handling of unicode characters for input and output filenames. We now encode to UTF-8 before passing to HandBrake. Fixed a crash in the queue multiple titles dialog. Added code to rescue tool windows which get placed outside of the visible screen area.Vodigi Open Source Interactive Digital Signage: Vodigi Release 6.0: Please note that we have removed the Kinect support in the Vodigi Player for Version 6.0. We are in the process of building a separate Kinect-enabled Player that will support the next generation Kinect sensor. If you are currently using Kinect with the Vodigi Player, you should not upgrade to Version 6.0. The following enhancements and fixes are included in Vodigi 6.0. Vodigi Administrator - New Interface - Timelines that allow you play video and images on the Main Screen Vodigi Player -...Wsus Package Publisher: Release v1.3.1310.05: Enhance the "Reboot Remote Computers", by adding a timer before the reboot occure. So that remote users can save their documents and close applications. You can also add a message to be display. In 'Tools'->'Settings'-> Misc Tab, you can set a default message. Enhance the "Compare Computers against AD", by choosing OUs to include in the comparison.New Projects555984402e86: 555984402e86DropBoxClient: DropBoxClient is a .NET library for interacting with the DropBox Core API. EDB to PST Converter-Fastest Method for Exchange Data conversion: Enstella EDB to PST converter software-smart and valuable solution for instant and safe recovery and conversion of EDB file into PST file.How to build an autodialer with PHP using your MySQL database: As the title says we create an autodialer application, which can call multiple phones simultaneously, in the time we set up.HungNm Test: HungNm TestIBANTools: Strumento da riga di comando per il calcolo massivo dell'IBAN a partire da ABI, CAB, nazione e conto.KGitSvn: This is only a project I set up to test git-svn functionality. It will be deleted when my testing is complete.MailboxLogParser: MailboxLogParser works with Exchange ActiveSync mailbox logs to help support engineers debug issue.MiniScrum: MiniScrum is a small MVC based website to collect notes of what the team members have been up to since our last meeting. pescar2013-shop-purecss: Pescar shop, library PureCssSharePoint User Permission Check: A SP2010 webpart for any site of any site collection. Gives info on permissions of a user for: all folders in all docs, every item in all folders of the librarySocksOverHttp: Welcome free internet, kick away HTTP proxy filter.TypeScript component based framework for enterprise web application.: TypeScript component based framework for enterprise web application.ugsf migration (2007/2010/2013): UGSF ( UserGroup SharePoint France) Documentation and Ressources for SharePoint Migration ( 2007/2010/2013)weiqk's project: only test Windows Imaging Component(WIC) Demo App on WEC2013: A sample application to Demo the Windows Imaging Component(WIC) on WEC2013.WPTrakt: wptrakt

  Read the article

• Microsoft&rsquo;s new technical computing initiative

  - by Randy Walker

  I made a mental note from earlier in the year.  Microsoft literally buys computers by the truckload.  From what I understand, it’s a typical practice amongst large software vendors.  You plug a few wires in, you test it, and you instantly have mega tera tera flops (don’t hold me to that number).  Microsoft has been trying to plug away at their cloud services (named Azure).  Which, for the layman, means Microsoft runs your software on their computers, and as demand increases you can allocate more computing power on the fly. With this in mind, it doesn’t surprise me that I was recently sent an executive email concerning Microsoft’s new technical computing initiative.  I find it to be a great marketing idea with actual substance behind their real work.  From the programmer academic perspective, in college we dreamed about this type of processing power.  This has decades of computer science theory behind it. A copy of the email received.  (note that I almost deleted this email, thinking it was spam due to it’s length) We don't often think about how complex life really is. Take the relatively simple task of commuting to and from work: it is, in fact, a complicated interplay of variables such as weather, train delays, accidents, traffic patterns, road construction, etc. You can however, take steps to shorten your commute - using a good, predictive understanding of a few of these variables. In fact, you probably are already taking these inputs and instinctively building a predictive model that you act on daily to get to your destination more quickly. Now, when we apply the same method to very complex tasks, this modeling approach becomes much more challenging. Recent world events clearly demonstrated our inability to process vast amounts of information and variables that would have helped to more accurately predict the behavior of global financial markets or the occurrence and impact of a volcano eruption in Iceland. To make sense of issues like these, researchers, engineers and analysts create computer models of the almost infinite number of possible interactions in complex systems. But, they need increasingly more sophisticated computer models to better understand how the world behaves and to make fact-based predictions about the future. And, to do this, it requires a tremendous amount of computing power to process and examine the massive data deluge from cameras, digital sensors and precision instruments of all kinds. This is the key to creating more accurate and realistic models that expose the hidden meaning of data, which gives us the kind of insight we need to solve a myriad of challenges. We have made great strides in our ability to build these kinds of computer models, and yet they are still too difficult, expensive and time consuming to manage. Today, even the most complicated data-rich simulations cannot fully capture all of the intricacies and dependencies of the systems they are trying to model. That is why, across the scientific and engineering world, it is so hard to say with any certainty when or where the next volcano will erupt and what flight patterns it might affect, or to more accurately predict something like a global flu pandemic. So far, we just cannot collect, correlate and compute enough data to create an accurate forecast of the real world. But this is about to change. Innovations in technology are transforming our ability to measure, monitor and model how the world behaves. The implication for scientific research is profound, and it will transform the way we tackle global challenges like health care and climate change. It will also have a huge impact on engineering and business, delivering breakthroughs that could lead to the creation of new products, new businesses and even new industries. Because you are a subscriber to executive e-mails from Microsoft, I want you to be the first to know about a new effort focused specifically on empowering millions of the world's smartest problem solvers. Today, I am happy to introduce Microsoft's Technical Computing initiative. Our goal is to unleash the power of pervasive, accurate, real-time modeling to help people and organizations achieve their objectives and realize their potential. We are bringing together some of the brightest minds in the technical computing community across industry, academia and science at www.modelingtheworld.com to discuss trends, challenges and shared opportunities. New advances provide the foundation for tools and applications that will make technical computing more affordable and accessible where mathematical and computational principles are applied to solve practical problems. One day soon, complicated tasks like building a sophisticated computer model that would typically take a team of advanced software programmers months to build and days to run, will be accomplished in a single afternoon by a scientist, engineer or analyst working at the PC on their desktop. And as technology continues to advance, these models will become more complete and accurate in the way they represent the world. This will speed our ability to test new ideas, improve processes and advance our understanding of systems. Our technical computing initiative reflects the best of Microsoft's heritage. Ever since Bill Gates articulated the then far-fetched vision of "a computer on every desktop" in the early 1980's, Microsoft has been at the forefront of expanding the power and reach of computing to benefit the world. As someone who worked closely with Bill for many years at Microsoft, I am happy to share with you that the passion behind that vision is fully alive at Microsoft and is carried out in the creation of our new Technical Computing group. Enabling more people to make better predictions We have seen the impact of making greater computing power more available firsthand through our investments in high performance computing (HPC) over the past five years. Scientists, engineers and analysts in organizations of all sizes and sectors are finding that using distributed computational power creates societal impact, fuels scientific breakthroughs and delivers competitive advantages. For example, we have seen remarkable results from some of our current customers: Malaria strikes 300,000 to 500,000 people around the world each year. To help in the effort to eradicate malaria worldwide, scientists at Intellectual Ventures use software that simulates how the disease spreads and would respond to prevention and control methods, such as vaccines and the use of bed nets. Technical computing allows researchers to model more detailed parameters for more accurate results and receive those results in less than an hour, rather than waiting a full day. Aerospace engineering firm, a.i. solutions, Inc., needed a more powerful computing platform to keep up with the increasingly complex computational needs of its customers: NASA, the Department of Defense and other government agencies planning space flights. To meet that need, it adopted technical computing. Now, a.i. solutions can produce detailed predictions and analysis of the flight dynamics of a given spacecraft, from optimal launch times and orbit determination to attitude control and navigation, up to eight times faster. This enables them to avoid mistakes in any areas that can cause a space mission to fail and potentially result in the loss of life and millions of dollars. Western & Southern Financial Group faced the challenge of running ever larger and more complex actuarial models as its number of policyholders and products grew and regulatory requirements changed. The company chose an actuarial solution that runs on technical computing technology. The solution is easy for the company's IT staff to manage and adjust to meet business needs. The new solution helps the company reduce modeling time by up to 99 percent - letting the team fine-tune its models for more accurate product pricing and financial projections. Our Technical Computing direction Collaborating closely with partners across industry and academia, we must now extend the reach of technical computing even further to help predictive modelers and data explorers make faster, more accurate predictions. As we build the Technical Computing initiative, we will invest in three core areas: Technical computing to the cloud: Microsoft will play a leading role in bringing technical computing power to scientists, engineers and analysts through the cloud. Existing high- performance computing users will benefit from the ability to augment their on-premises systems with cloud resources that enable 'just-in-time' processing. This platform will help ensure processing resources are available whenever they are needed-reliably, consistently and quickly. Simplify parallel development: Today, computers are shipping with more processing power than ever, including multiple cores, but most modern software only uses a small amount of the available processing power. Parallel programs are extremely difficult to write, test and trouble shoot. However, a consistent model for parallel programming can help more developers unlock the tremendous power in today's modern computers and enable a new generation of technical computing. We are delivering new tools to automate and simplify writing software through parallel processing from the desktop... to the cluster... to the cloud. Develop powerful new technical computing tools and applications: We know scientists, engineers and analysts are pushing common tools (i.e., spreadsheets and databases) to the limits with complex, data-intensive models. They need easy access to more computing power and simplified tools to increase the speed of their work. We are building a platform to do this. Our development efforts will yield new, easy-to-use tools and applications that automate data acquisition, modeling, simulation, visualization, workflow and collaboration. This will allow them to spend more time on their work and less time wrestling with complicated technology. Thinking bigger There is so much left to be discovered and so many questions yet to be answered in the fascinating world around us. We believe the technical computing community will show us that we have not seen anything yet. Imagine just some of the breakthroughs this community could make possible: Better predictions to help improve the understanding of pandemics, contagion and global health trends. Climate change models that predict environmental, economic and human impact, accessible in real-time during key discussions and debates. More accurate prediction of natural disasters and their impact to develop more effective emergency response plans. With an ambitious charter in hand, this new team is ready to build on our progress to-date and execute Microsoft's technical computing vision over the months and years ahead. We will steadily invest in the right technologies, tools and talent, and work to bring together the technical computing community. I invite you to visit www.modelingtheworld.com today. We welcome your ideas and feedback. I look forward to making this journey with you and others who want to answer the world's biggest questions, discover solutions to problems that seem impossible and uncover a host of new opportunities to change the world we live in for the better. Bob

  Read the article

• CodePlex Daily Summary for Tuesday, April 03, 2012

  CodePlex Daily Summary for Tuesday, April 03, 2012Popular ReleasesWiX Toolset: WiX v3.6 RC0: WiX v3.6 RC0 (3.6.2803.0) provides support for VS11 and a more stable Burn engine. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/4/3/WiX-v3.6-Release-Candidate-Zero-availableSageFrame: SageFrame 2.0: Sageframe is an open source ASP.NET web development framework developed using ASP.NET 3.5 with service pack 1 (sp1) technology. It is designed specifically to help developers build dynamic website by providing core functionality common to most web applications.Lightbox Gallery Module for DotNetNuke: 01.11.00: This version of the Lightbox Gallery Module adds the following features/bug fixes: Feature: Read image EXIF information Bug Fix: URL parsing bug for any folder provider Minimum System Requirements Please ensure that your environment meets or exceeds the following system requirements: DotNetNuke® Version 06.00.00 or higher SQL Server 2005 or later .Net Framework 3.5 SP1 or laterClosedXML - The easy way to OpenXML: ClosedXML 0.65.0: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks)callisto: callisto 2.0.24: Implemented ares encryption protocol for supported clients. Also changed script loading method to read direct from source files.sb0t: sb0t 4.61: Added packet encryption protocol for supported clients.iTuner - The iTunes Companion: iTuner 1.5.4475: Fix to parse empty playlists in iTunes LibraryExtAspNet: ExtAspNet v3.1.1: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-04-02 v3.1.1 +????????，?????????????，????????????（...Document.Editor: 2012.2: Whats New for Document.Editor 2012.2: New Save Copy support New Page Setup support Minor Bug Fix's, improvements and speed upsVidCoder: 1.3.2: Added option for the minimum title length to scan. Added support to enable or disable LibDVDNav. Added option to prompt to delete source files after clearing successful completed items. Added option to disable remembering recent files and folders. Tweaked number box to only select all on a quick click.MJP's DirectX 11 Samples: Light Indexed Deferred Rendering: Implements light indexed deferred using per-tile light lists calculated in a compute shader, as well as a traditional deferred renderer that uses a compute shader for per-tile light culling and per-pixel shading.Pcap.Net: Pcap.Net 0.9.0 (66492): Pcap.Net - March 2012 Release Pcap.Net is a .NET wrapper for WinPcap written in C++/CLI and C#. It Features almost all WinPcap features and includes a packet interpretation framework. Version 0.9.0 (Change Set 66492)March 31, 2012 release of the Pcap.Net framework. Follow Pcap.Net on Google+Follow Pcap.Net on Google+ Files Pcap.Net.DevelopersPack.0.9.0.66492.zip - Includes all the tutorial example projects source files, the binaries in a 3rdParty directory and the documentation. It include...Extended WPF Toolkit: Extended WPF Toolkit - 1.6.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's in the 1.6.0 Release?BusyIndicator ButtonSpinner Calculator CalculatorUpDown CheckListBox - Breaking Changes CheckComboBox - New Control ChildWindow CollectionEditor CollectionEditorDialog ColorCanvas ColorPicker DateTimePicker DateTimeUpDown DecimalUpDown DoubleUpDown DropDownButton IntegerUpDown Magnifier MaskedTextBox MessageBox MultiLineTex...Media Companion: MC 3.434b Release: General This release should be the last beta for 3.4xx. If there are no major problems, by the end of the week it will upgraded to 3.500 Stable! The latest mc_com.exe should be included too! TV Bug fix - crash when using XBMC scraper for TV episodes. Bug fix - episode count update when adding new episodes. Bug fix - crash when actors name was missing. Enhanced TV scrape progress text. Enhancements made to missing episodes display. Movies Bug fix - hide "Play Trailer" when multisaev...Better Explorer: Better Explorer 2.0.0.831 Alpha: - A new release with: - many bugfixes - changed icon - added code for more failsafe registry usage on x64 systems - not needed regfix anymore - added ribbon shortcut keys - Other fixes Note: If you have problems opening system libraries, a suggestion was given to copy all of these libraries and then delete the originals. Thanks to Gaugamela for that! (see discussion here: 349015 ) Note2: I was upload again the setup due to missing file!MonoGame - Write Once, Play Everywhere: MonoGame 2.5: The MonoGame team are pleased to announce that MonoGame v2.5 has been released. This release contains important bug fixes, implements optimisations and adds key features. MonoGame now has the capability to use OpenGLES 2.0 on Android and iOS devices, meaning it now supports custom shaders across mobile and desktop platforms. Also included in this release are native orientation animations on iOS devices and better Orientation support for Android. There have also been a lot of bug fixes since t...Circuit Diagram: Circuit Diagram 2.0 Alpha 3: New in this release: Added components: Microcontroller Demultiplexer Flip & rotate components Open XML files from older versions of Circuit Diagram Text formatting for components New CDDX syntax Other fixesUmbraco CMS: Umbraco 5.1 CMS (Beta): Beta build for testing - please report issues at issues.umbraco.org (Latest uploaded: 5.1.0.123) What's new in 5.1? The full list of changes is on our http://progress.umbraco.org task tracking page. It shows items complete for 5.1, and 5.1 includes items for 5.0.1 and 5.0.2 listed there too. Here's two headline acts: Members5.1 adds support for backoffice editing of Members. We support the pairing up of our content type system in Hive with regular ASP.NET Membership providers (we ship a def...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.2.11: One Click Install from NuGet Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla Public Licence 2. 2. User interface control and associated data access layer classes have been added to aid developers integrating 51Degrees.mobi into wider projects such as content management systems or web hosting management solutions. Use the following in a web form or user control to access these new UI components. <%@ Register Assembly="FiftyOne.Foundation" Namespace="...ScintillaNET: ScintillaNET 2.5: A slew of bug-fixes with a few new features sprinkled in. This release also upgrades the SciLexer and SciLexer64 DLLs to version 3.0.4. The official stuff: Issue # Title 32402 32402 27137 27137 31548 31548 30179 30179 24932 24932 29701 29701 31238 31238 26875 26875 30052 30052 New Projects3DTweet: 3Dtweet is an effort to make tweets appear in a aesthetic manner to the users of windows phone.Its developed using VS2010 expresss.Alay Plugin for Windows Live Writer: a project for creating an alay languageAuthor-it Copy Folder Plug-in: The Copy Folder Plug-in is an Author-it plug-in that allows the user to create a duplicate of a folder and its contents, including subfolders and objects.Author-it Dependencies Plug-in: The Word Count Plug-in is an Author-it plug-in that allows the user to drill down into object relationships to find objects that selected Author-it objects depend on.Author-it Word Count Plug-in: The Word Count Plug-in is an Author-it plug-in that allows the user to get word counts for selected topics.Azure Configuration File Comparer: Compares two Azure configuration files and highlights the differencesBootstrap Footer Sticker: Bootstrap extensions for footer to stick at the bottomBulk Approval Webpart: This webpart can be added to any list, or document library that requires approval. When the button is clicked it will approve all items. It will also kick start any workflows attached to the list / library that are set to start when an item has been changed. CodeTimer: Code Execute TimeCRM 2011 - WinForm based User Settings Console: This is Windows Form based Utility to do bulk management of User Settings in CRM 2011Emergency System: An Imagine Cup projectFalafel Solution Rename Script: The Falafel Software Solution Rename PowerShell Script makes it easy to reuse an existing solution/project by performing a global rename. If you have a solution named ExampleSolution and want to reuse it as WidgetSolution, this script will rename everything for you.Gadgeteer Bluetooth Module: BETA Drivers for the .NET Gadgeteer Bluetooth modulesGreg's Channel 9 Utilities and Helpers: Utilities and helpers for Microsoft's Channel 9 (C9) site. These are utilities I've created to make my C9 work faster and easierHB's First Time: My first project hereHOMMFrame: Studying project about frames.ICNInformaticaCenter: * ICNInformaticaCenter *Insert a Favorite (Bookmark) plugin for Windows Live Writer: This Windows Live Writer plugin allows you to select a Favorite (Bookmark) and insert it into your blog entry.Kinect your Metro Style App: The main idea is to tell Metro Style App communicate with external environment via Kinect Sensor.Memo: Memo Intellegence SystemMGR.CommandLineParser: MGR.CommandLineParser is a multi-command line parser. It uses System.ComponentModel.DataAnnotations to declare and validate the commands.MusicStoreMVC3: ?????MVC3??????????，????????（???????）??? 1.EF4.1 2.MVC3 3.MvcPager 4.Linq ?????? NN Crew Calculator: Calculator project to help learn C#Reporte Ciudadano: Aplicación para que los ciudadanos reporten los problemas al ayuntamiento.Sejrssedler: This is a school project made, by four student in Aarhus, Denmark. During the Datamatiker study(2nd year).smartcamera: smart cameraSpecEx: Speculative ExecutionStructure Copier: This small program is supposed to copy tree structure of directory.TFS2010 Service Provider: Web Service (asmx) is a provider of Team Foundation Server 2010 object model. Was developed to enable the implementation of client application for Android and etc. platforms, which receives data from the server via Web services.totalem: totalem - free file manager for WindowsWebSharperWithTypeProviders: WebSharper project with Visual Studio 2011 Beta, .Net 4.5 and F# 3.0 with TypeProviders

  Read the article

• CodePlex Daily Summary for Tuesday, September 04, 2012

  CodePlex Daily Summary for Tuesday, September 04, 2012Popular ReleasesPE file reader: READPE-e9ff717a638d.zip: Introduced some new code which parses the IMAGENTHEADERS. At the moment the command line options dosheader and imagentheaders are working and and example of their usage can be... D:\>readpe pe-files\main.exe dosheader imagentheadersMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.64: Another attempt to fix the fiasco that was my bad decision to rename the DLLs to get away from a strong-name collision that was causing lots of problems for me. Too many existing projects expected AjaxMin.dll, and lots of things broke downstream from me. This release keeps the .net 2.0 version named AjaxMin.dll. The new .net 3.5 and .net 4.0 versions are named AjaxMinLibrary.dll. If an existing project is expecting the old name, they should continue to pick up the .net 2.0 version (since the ...Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83NWebsec: NWebsec 1.0.3: This release fixes two bugs in the NWebsec.Mvc package. Go get it on NuGet! http://nuget.org/packages/NWebsec.Mvc/ These work items made it into the release: 9 10 Check out the Documentation to learn how it works. This release has been tagged v1.0.3 in source control. Enjoy!RBAC Manager R2 for Exchange 2010 SP2, Exchange 2013 Preview and Office 365: RBAC Manager R2 1.5.5.0: now supports to manage RBAC on Office 365 'remember password' feature now saves the password as encrypted as opposed to plain-text format in version 1.5.0.0 DPAPI is used to encrypt the saved password; for more information about DPAPI please check: Managed DPAPI Part I: ProtectedData http://blogs.msdn.com/b/shawnfa/archive/2004/05/05/126825.aspx The tool requires HTTP/HTTPS network connection to the Exchange server Known Bugs: Active Directory lookup is not working remotely and crashes the ...WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.Dynamics AX Build Scripts: AX TFS Build Library Beta - v0.2.0.0: Beta release of TFS 2010 workflow code activities for AX 2009 and AX 2012. Build template for AX 2012 included. There is one refactor of code that will break your existing workflows. The AOS workflow step to stop/start AOS now expects the actual windows service name, not the port number of the AOS. There now is a new step to retrieve server settings, which can get the service identifier based on the port number. The registry has to be read to retrieve these settings, and we didn't want to ke...Cosmo OS: Cosmo OS Lama Preview: Info Sulla Release Lama Preview ( Prima Preview Pubblica ) Data Di Rilascio: 2 / 09 / 12 Build: 1950 Ramo Di Sviluppo: cosmo_os.preview.lama.bid1535543 Tipo Release: Stable / PreviewNETDeob0: NETDeob 0.3.1 BETA binaries: 0.3.1Custom Captcha Plugin for Kooboo CMS for adding content or sending feedback: Custom Captcha Validator Plugin v1.1 for Kooboo: Download file CustomCaptchaValidatorPlugin.dll and install it to KooBoo CMS. Release 1.1: Fixed error: "A generic error occurred in GDI+" (if hosting is less than Windows Server 2008 or Windows 7) - http://forum.kooboo.com/yafpostsm6602Custom-captcha---any-best-practice.aspx#post6602TSQL Code Smells Finder: POC 1.01: Proof of concept 1.01 TSQLDomTest.ps1 and Errors.Txt are requiredSaturn Kinect: Saturn Kinect + Sample Applications - Release 3: This release includes : - Saturn Kinect Library - Kinect Motion Capture Application - Controlling mouse cursor sample - Hand swip detection sample + Source CodesDiscuzViet: DiscuzX2.5_02092012_Vietnam: DiscuzX2.502092012VietnamBookmark Collector: 01.00.00: This is the first release with a minimal feature set. You can save, edit, delete, and display a list of URLs from various sites.EntLib.com????????: EntLib.com???????? v3.0: EntLib eCommerce Solution ???Microsoft .Net Framework?????????????????????。Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.Math.NET Numerics: Math.NET Numerics v2.2.1: Major linear algebra rework since v2.1, now available on Codeplex as well (previous versions were only available via NuGet). Since v2.2.0: Student-T density more robust for very large degrees of freedom Sparse Kronecker product much more efficient (now leverages sparsity) Direct access to raw matrix storage implementations for advanced extensibility Now also separate package for signed core library with a strong name (we dropped strong names in v2.2.0) Also available as NuGet packages...New ProjectsAction Bar: Action Bar is a SNS network based on activities.async/await C# Samples: Project demonstrating new C# feature - async and await. You can find here several solutions to make UI calls asynchronous: APM, EAP and async.Attribute Based Xaml Generator: Dynamic Xaml UI Generator and Editor Just point it to a dll or an exe and then navigate through your namespaces to your classB INI Sharp Library: Full support for INI files.brevis nopCommerce Extensions: Extensions for nopCommerce open soruce e-commerce solution (several Versions). !Contents nop 1.90 fpr testing the new Lib! This will be removed after 1. releaseConEmu - Windows console with tabs: ConEmu (short for Console Emulator) is a console window and tabbed environment for Windows. Tabs, Fonts, Quake style, Transparency and hundreds of other optionsContrib.Mod.AccountWidgets: Orchard module for adding login and registration widgetsCSharp GUI for Mono: This is an application which makes use of "Mono" to execute CSharp programs. It provides a graphical user interface to run the CSharp program. DocCollection: ???????????????http://www.qlili.comfanpages: Fanatics!ISIS Associations Manager: Application Web permettant la gestion d'Associations. (Membres, Emailing, Calendier)LogMan: ????????????b/s??，??python?? require: web.pyLucifure Stash - Azure Table Storage Client: Lucifure Stash is an alternate Azure table storage client, which supports arrays, enumerations, large data > 64KB, serialization, morphing and more.Mod.EverlastingLogin: Orchard module to allow a user to stay logged in for a certain amount of time using cookiesPHP Extra Functions: PHP Extra Functions is a suite of functions that extend common libraries with easy to use functions. For example, functions are added to MySQLi to simplify use.Raise events controlled: This is an example of raising you events controlled (with exception handling)sb0t v.5: sb0t 5 development page.SharePoint Mobile OA Platform: Via mobile device, by using the SharePoint Mobile Support, Web Service, Client OM, WCF Data Service bring about mobile office.Simple Guestbook: I just want to share simple code, may be will be helpful for newbies.SimplyWeather2.gadget: A neat little weather gadget for your Windows Desktop.Tanks: Required summary is hereUtility Project: Utilities ProjectWindows Phone: The goal of this project is to improve my skills in Windows Phonewords: ?????????Wpf Testing Lib: This is a project for auto testing wpf appswtstudy: wtstudy

  Read the article

• Installing SharePoint 2010 and PowerPivot for SharePoint on Windows 7

  - by smisner

  Many people like me want (or need) to do their business intelligence development work on a laptop. As someone who frequently speaks at various events or teaches classes on all subjects related to the Microsoft business intelligence stack, I need a way to run multiple server products on my laptop with reasonable performance. Once upon a time, that requirement meant only that I had to load the current version of SQL Server and the client tools of choice. In today's post, I'll review my latest experience with trying to make the newly released Microsoft BI products work with a Windows 7 operating system. The entrance of Microsoft Office SharePoint Server 2007 into the BI stack complicated matters and I started using Virtual Server to establish a "suitable" environment. As part of the team that delivered a lot of education as part of the Yukon pre-launch activities (that would be SQL Server 2005 for the uninitiated), I was working with four - yes, four - virtual servers. That was a pretty brutal workload for a 2GB laptop, which worked if I was very, very careful. It could also be a finicky and unreliable configuration as I learned to my dismay at one TechEd session several years ago when I had to reboot a very carefully cached set of servers just minutes before my session started. Although it worked, it came back to life very, very slowly much to the displeasure of the audience. They couldn't possibly have been less pleased than me. At that moment, I resolved to get the beefiest environment I could afford and consolidate to a single virtual server. Enter the 4GB 64-bit laptop to preserve my sanity and my livelihood. Likewise, for SQL Server 2008, I managed to keep everything within a single virtual server and I could function reasonably well with this approach. Now we have SQL Server 2008 R2 plus Office SharePoint Server 2010. That means a 64-bit operating system. Period. That means no more Virtual Server. That means I must use Hyper-V or another alternative. I've heard alternatives exist, but my few dabbles in this area did not yield positive results. It might have been just me having issues rather than any failure of those technologies to adequately support the requirements. My first run at working with the new BI stack configuration was to set up a 64-bit 4GB laptop with a dual-boot to run Windows Server 2008 R2 with Hyper-V. However, I was generally not happy with running Windows Server 2008 R2 on my laptop. For one, I couldn't put it into sleep mode, which is helpful if I want to prepare for a presentation beforehand and then walk to the podium without the need to hold my laptop in its open state along the way (my strategy at the TechEd session long, long ago). Secondly, it was finicky with projectors. I had issues from time to time and while I always eventually got it to work, I didn't appreciate those nerve-wracking moments wondering whether this would be the time that it wouldn't work. Somewhere along the way, I learned that it was possible to load SharePoint 2010 in a Windows 7 which piqued my interest. I had just acquired a new laptop running Windows 7 64-bit, and thought surely running the BI stack natively on my laptop must be better than running Hyper-V. (I have not tried booting to Hyper-V VHD yet, but that's on my list of things to try so the jury of one is still out on this approach.) Recently, I had to build up a server with the RTM versions of SQL Server 2008 R2 and Sharepoint Server 2010 and decided to follow suit on my Windows 7 Ultimate 64-bit laptop. The process is slightly different, but I'm happy to report that it IS possible, although I had some fits and starts along the way. DISCLAIMER: These products are NOT intended to be run in production mode on the Windows 7 operating system. The configuration described in this post is strictly for development or learning purposes and not supported by Microsoft. If you have trouble, you will NOT get help from them. I might be able to help, but I provide no guarantees of my ability or availablity to help. I won't provide the step-by-step instructions in this post as there are other resources that provide these details, but I will provide an overview of my approach, point you to the relevant resources, describe some of the problems I encountered, and explain how I addressed those problems to achieve my desired goal. Because my goal was not simply to set up SharePoint Server 2010 on my laptop, but specifically PowerPivot for SharePoint, I started out by referring to the installation instructions at the PowerPiovt-Info site, but mainly to confirm that I was performing steps in the proper sequence. I didn't perform the steps in Part 1 because those steps are applicable only to a server operating system which I am not running on my laptop. Then, the instructions in Part 2, won't work exactly as written for the same reason. Instead, I followed the instructions on MSDN, Setting Up the Development Environment for SharePoint 2010 on Windows Vista, Windows 7, and Windows Server 2008. In general, I found the following differences in installation steps from the steps at PowerPivot-Info: You must copy the SharePoint installation media to the local drive so that you can edit the config.xml to allow installation on a Windows client. You also have to manually install the prerequisites. The instructions provides links to each item that you must manually install and provides a command-line instruction to execute which enables required Windows features. I will digress for a moment to save you some grief in the sequence of steps to perform. I discovered later that a missing step in the MSDN instructions is to install the November CTP Reporting Services add-in for SharePoint. When I went to test my SharePoint site (I believe I tested after I had a successful PowerPivot installation), I ran into the following error: Could not load file or assembly 'RSSharePointSoapProxy, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. I was rather surprised that Reporting Services was required. Then I found an article by Alan le Marquand, Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010,that instructed readers to install the November add-in. My first reaction was, "Really?!?" But I confirmed it in another TechNet article on hardware and software requirements for SharePoint Server 2010. It doesn't refer explicitly to the November CTP but following the link took me there. (Interestingly, I retested today and there's no longer any reference to the November CTP. Here's the link to download the latest and greatest Reporting Services Add-in for SharePoint Technologies 2010.) You don't need to download the add-in anymore if you're doing a regular server-based installation of SharePoint because it installs as part of the prerequisites automatically. When it was time to start the installation of SharePoint, I deviated from the MSDN instructions and from the PowerPivot-Info instructions: On the Choose the installation you want page of the installation wizard, I chose Server Farm. On the Server Type page, I chose Complete. At the end of the installation, I did not run the configuration wizard. Returning to the PowerPivot-Info instructions, I tried to follow the instructions in Part 3 which describe installing SQL Server 2008 R2 with the PowerPivot option. These instructions tell you to choose the New Server option on the Setup Role page where you add PowerPivot for SharePoint. However, I ran into problems with this approach and got installation errors at the end. It wasn't until much later as I was investigating an error that I encountered Dave Wickert's post that installing PowerPivot for SharePoint on Windows 7 is unsupported. Uh oh. But he did want to hear about it if anyone succeeded, so I decided to take the plunge. Perseverance paid off, and I can happily inform Dave that it does work so far. I haven't tested absolutely everything with PowerPivot for SharePoint but have successfully deployed a workbook and viewed the PowerPivot Management Dashboard. I have not yet tested the data refresh feature, but I have installed. Continue reading to see how I accomplished my objective. I unintalled SQL Server 2008 R2 and started again. I had different problems which I don't recollect now. However, I uninstalled again and approached installation from a different angle and my next attempt succeeded. The downside of this approach is that you must do all of the things yourself that are done automatically when you install PowerPivot as a new server. Here are the steps that I followed: Install SQL Server 2008 R2 to get a database engine instance installed. Run the SharePoint configuration wizard to set up the SharePoint databases. In Central Administration, create a Web application using classic mode authentication as per a TechNet article on PowerPivot Authentication and Authorization. Then I followed the steps I found at How to: Install PowerPivot for SharePoint on an Existing SharePoint Server. Especially important to note - you must launch setup by using Run as administrator. I did not have to manually deploy the PowerPivot solution as the instructions specify, but it's good to know about this step because it tells you where to look in Central Administration to confirm a successful deployment. I did spot some incorrect steps in the instructions (at the time of this writing) in How To: Configure Stored Credentials for PowerPivot Data Refresh. Specifically, in the section entitled Step 1: Create a target application and set the credentials, both steps 10 and 12 are incorrect. They tell you to provide an actual Windows user name and password on the page where you are simply defining the prompts for your application in the Secure Store Service. To add the Windows user name and password that you want to associate with the application - after you have successfully created the target application - you select the target application and then click Set credentials in the ribbon. Lastly, I followed the instructions at How to: Install Office Data Connectivity Components on a PowerPivot server. However, I have yet to test this in my current environment. I did have several stops and starts throughout this process and edited those out to spare you from reading non-essential information. I believe the explanation I have provided here accurately reflect the steps I followed to produce a working configuration. If you follow these steps and get a different result, please let me know so that together we can work through the issue and correct these instructions. I'm sure there are many other folks in the Microsoft BI community that will appreciate the ability to set up the BI stack in a Windows 7 environment for development or learning purposes. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Evil DRY

  - by StefanSteinegger

  DRY (Don't Repeat Yourself) is a basic software design and coding principle. But there is just no silver bullet. While DRY should increase maintainability by avoiding common design mistakes, it could lead to huge maintenance problems when misunderstood. The root of the problem is most probably that many developers believe that DRY means that any piece of code that is written more then once should be made reusable. But the principle is stated as "Every piece of knowledge must have a single, unambiguous, authoritative representation within a system." So the important thing here is "knowledge". Nobody ever said "every piece of code". I try to give some examples of misusing the DRY principle. Code Repetitions by Coincidence There is code that is repeated by pure coincidence. It is not the same code because it is based on the same piece of knowledge, it is just the same by coincidence. It's hard to give an example of such a case. Just think about some lines of code the developer thinks "I already wrote something similar". Then he takes the original code, puts it into a public method, even worse into a base class where none had been there before, puts some weird arguments and some if or switch statements into it to support all special cases and calls this "increasing maintainability based on the DRY principle". The resulting "reusable method" is usually something the developer not even can give a meaningful name, because its contents isn't anything specific, it is just a bunch of code. For the same reason, nobody will really understand this piece of code. Typically this method only makes sense to call after some other method had been called. All the symptoms of really bad design is evident. Fact is, writing this kind of "reusable methods" is worse then copy pasting! Believe me. What will happen when you change this weird piece of code? You can't say what'll happen, because you can't understand what the code is actually doing. So better don't touch it anymore. Maintainability just died. Of course this problem is with any badly designed code. But because the developer tried to make this method as reusable as possible, large parts of the system get dependent on it. Completely independent parts get tightly coupled by this common piece of code. Changing on the single common place will have effects anywhere in the system, a typical symptom of too tight coupling. Without trying to dogmatically (and wrongly) apply the DRY principle, you just had a system with a weak design. Now you get a system which just can't be maintained anymore. So what can you do against it? When making code reusable, always identify the generally reusable parts of it. Find the reason why the code is repeated, find the common "piece of knowledge". If you have to search too far, it's probably not really there. Explain it to a colleague, if you can't explain or the explanation is to complicated, it's probably not worth to reuse. If you identify the piece of knowledge, don't forget to carefully find the place where it should be implemented. Reusing code is never worth giving up a clean design. Methods always need to do something specific. If you can't give it a simple and explanatory name, you did probably something weird. If you can't find the common piece of knowledge, try to make the code simpler. For instance, if you have some complicated string or collection operations within this code, write some general-purpose operations into a helper class. If your code gets simple enough, its not so bad if it can't be reused. If you are not able to find anything simple and reasonable, copy paste it. Put a comment into the code to reference the other copies. You may find a solution later. Requirements Repetitions by Coincidence Let's assume that you need to implement complex tax calculations for many countries. It's possible that some countries have very similar tax rules. These rules are still completely independent from each other, since every country can change it of its own. (Assumed that this similarity is actually by coincidence and not by political membership. There might be basic rules applying to all European countries. etc.) Let's assume that there are similarities between an Asian country and an African country. Moving the common part to a central place will cause problems. What happens if one of the countries changes its rules? Or - more likely - what happens if users of one country complain about an error in the calculation? If there is shared code, it is very risky to change it, even for a bugfix. It is hard to find requirements to be repeated by coincidence. Then there is not much you can do against the repetition of the code. What you really should consider is to make coding of the rules as simple as possible. So this independent knowledge "Tax Rules in Timbuktu" or wherever should be as pure as possible, without much overhead and stuff that does not belong to it. So you can write every independent requirement short and clean. DRYing try-catch and using Blocks This is a technical issue. Blocks like try-catch or using (e.g. in C#) are very hard to DRY. Imagine a complex exception handling, including several catch blocks. When the contents of the try block as well as the contents of the individual catch block are trivial, but the whole structure is repeated on many places in the code, there is almost no reasonable way to DRY it. try { // trivial code here using (Thingy thing = new thingy) { //trivial, but always different line of code } } catch(FooException foo) { // trivial foo handling } catch (BarException bar) { // trivial bar handling } catch { // trivial common handling } finally { // trivial finally block } The key here is that every block is trivial, so there is nothing to just move into a separate method. The only part that differs from case to case is the line of code in the body of the using block (or any other block). The situation is especially interesting if the many occurrences of this structure are completely independent: they appear in classes with no common base class, they don't aggregate each other and so on. Let's assume that this is a common pattern in service methods within the whole system. Examples of Evil DRYing in this situation: Put a if or switch statement into the method to choose the line of code to execute. There are several reasons why this is not a good idea: The close coupling of the formerly independent implementation is the strongest. Also the readability of the code and the use of a parameter to control the logic. Put everything into a method which takes a delegate as argument to call. The caller just passes his "specific line of code" to this method. The code will be very unreadable. The same maintainability problems apply as for any "Code Repetition by Coincidence" situations. Enforce a base class to all the classes where this pattern appears and use the template method pattern. It's the same readability and maintainability problem as above, but additionally complex and tightly coupled because of the base class. I would call this "Inheritance by Coincidence" which will not lead to great software design. What can you do against it: Ideally, the individual line of code is a call to a class or interface, which could be made individual by inheritance. If this would be the case, it wouldn't be a problem at all. I assume that it is no such a trivial case. Consider to refactor the error concept to make error handling easier. The last but not worst option is to keep the replications. Some pattern of code must be maintained in consistency, there is nothing we can do against it. And no reason to make it unreadable. Conclusion The DRY-principle is an important and basic principle every software developer should master. The key is to identify the "pieces of knowledge". There is code which can't be reused easily because of technical reasons. This requires quite a bit flexibility and creativity to make code simple and maintainable. It's not the problem of the principle, it is the problem of blindly applying a principle without understanding the problem it should solve. The result is mostly much worse then ignoring the principle.

  Read the article

• Guest Post: Using IronRuby and .NET to produce the &lsquo;Hello World of WPF&rsquo;

  - by Eric Nelson

  [You might want to also read other GuestPosts on my blog – or contribute one?] On the 26th and 27th of March (2010) myself and Edd Morgan of Microsoft will be popping along to the Scottish Ruby Conference. I dabble with Ruby and I am a huge fan whilst Edd is a “proper Ruby developer”. Hence I asked Edd if he was interested in creating a guest post or two for my blog on IronRuby. This is the second of those posts. If you should stumble across this post and happen to be attending the Scottish Ruby Conference, then please do keep a look out for myself and Edd. We would both love to chat about all things Ruby and IronRuby. And… we should have (if Amazon is kind) a few books on IronRuby with us at the conference which will need to find a good home. This is me and Edd and … the book: Order on Amazon: http://bit.ly/ironrubyunleashed Using IronRuby and .NET to produce the ‘Hello World of WPF’ In my previous post I introduced, to a minor extent, IronRuby. I expanded a little on the basics of by getting a Rails app up-and-running on this .NET implementation of the Ruby language — but there wasn't much to it! So now I would like to go from simply running a pre-existing project under IronRuby to developing a whole new application demonstrating the seamless interoperability between IronRuby and .NET. In particular, we'll be using WPF (Windows Presentation Foundation) — the component of the .NET Framework stack used to create rich media and graphical interfaces. Foundations of WPF To reiterate, WPF is the engine in the .NET Framework responsible for rendering rich user interfaces and other media. It's not the only collection of libraries in the framework with the power to do this — Windows Forms does the trick, too — but it is the most powerful and flexible. Put simply, WPF really excels when you need to employ eye candy. It's all about creating impact. Whether you're presenting a document, video, a data entry form, some kind of data visualisation (which I am most hopeful for, especially in terms of IronRuby - more on that later) or chaining all of the above with some flashy animations, you're likely to find that WPF gives you the most power when developing any of these for a Windows target. Let's demonstrate this with an example. I give you what I like to consider the 'hello, world' of WPF applications: the analogue clock. Today, over my lunch break, I created a WPF-based analogue clock using IronRuby... Any normal person would have just looked at their watch. - Twitter The Sample Application: Click here to see this sample in full on GitHub. Using Windows Presentation Foundation from IronRuby to create a Clock class Invoking the Clock class   Gives you The above is by no means perfect (it was a lunch break), but I think it does the job of illustrating IronRuby's interoperability with WPF using a familiar data visualisation. I'm sure you'll want to dissect the code yourself, but allow me to step through the important bits. (By the way, feel free to run this through ir first to see what actually happens). Now we're using IronRuby - unlike my previous post where we took pure Ruby code and ran it through ir, the IronRuby interpreter, to demonstrate compatibility. The main thing of note is the very distinct parallels between .NET namespaces and Ruby modules, .NET classes and Ruby classes. I guess there's not much to say about it other than at this point, you may as well be working with a purely Ruby graphics-drawing library. You're instantiating .NET objects, but you're doing it with the standard Ruby .new method you know from Ruby as Object#new — although, the root object of all your IronRuby objects isn't actually Object, it's System.Object. You're calling methods on these objects (and classes, for example in the call to System.Windows.Controls.Canvas.SetZIndex()) using the underscored, lowercase convention established for the Ruby language. The integration is so seamless. The fact that you're using a dynamic language on top of .NET's CLR is completely abstracted from you, allowing you to just build your software. A Brief Note on Events Events are a big part of developing client applications in .NET as well as under every other environment I can think of. In case you aren't aware, event-driven programming is essentially the practice of telling your code to call a particular method, or other chunk of code (a delegate) when something happens at an unpredictable time. You can never predict when a user is going to click a button, move their mouse or perform any other kind of input, so the advent of the GUI is what necessitated event-driven programming. This is where one of my favourite aspects of the Ruby language, blocks, can really help us. In traditional C#, for instance, you may subscribe to an event (assign a block of code to execute when an event occurs) in one of two ways: by passing a reference to a named method, or by providing an anonymous code block. You'd be right for seeing the parallel here with Ruby's concept of blocks, Procs and lambdas. As demonstrated at the very end of this rather basic script, we are using .NET's System.Timers.Timer to (attempt to) update the clock every second (I know it's probably not the best way of doing this, but for example's sake). Note: Diverting a little from what I said above, the ticking of a clock is very predictable, yet we still use the event our Timer throws to do this updating as one of many ways to perform that task outside of the main thread. You'll see that all that's needed to assign a block of code to be triggered on an event is to provide that block to the method of the name of the event as it is known to the CLR. This drawback to this is that it only allows the delegation of one code block to each event. You may use the add method to subscribe multiple handlers to that event - pushing that to the end of a queue. Like so: def tick puts "tick tock" end timer.elapsed.add method(:tick) timer.elapsed.add proc { puts "tick tock" } tick_handler = lambda { puts "tick tock" } timer.elapsed.add(tick_handler)   The ability to just provide a block of code as an event handler helps IronRuby towards that very important term I keep throwing around; low ceremony. Anonymous methods are, of course, available in other more conventional .NET languages such as C# and VB but, as usual, feel ever so much more elegant and natural in IronRuby. Note: Whether it's a named method or an anonymous chunk o' code, the block you delegate to the handling of an event can take arguments - commonly, a sender object and some args. Another Brief Note on Verbosity Personally, I don't mind verbose chaining of references in my code as long as it doesn't interfere with performance - as evidenced in the example above. While I love clean code, there's a certain feeling of safety that comes with the terse explicitness of long-winded addressing and the describing of objects as opposed to ambiguity (not unlike this sentence). However, when working with IronRuby, even I grow tired of typing System::Whatever::Something. Some people enjoy simply assuming namespaces and forgetting about them, regardless of the language they're using. Don't worry, IronRuby has you covered. It is completely possible to, with a call to include, bring the contents of a .NET-converted module into context of your IronRuby code - just as you would if you wanted to bring in an 'organic' Ruby module. To refactor the style of the above example, I could place the following at the top of my Clock class: class Clock include System::Windows::Shape include System::Windows::Media include System::Windows::Threading # and so on...   And by doing so, reduce calls to System::Windows::Shapes::Ellipse.new to simply Ellipse.new or references to System::Windows::Threading::DispatcherPriority.Render to a friendlier DispatcherPriority.Render. Conclusion I hope by now you can understand better how IronRuby interoperates with .NET and how you can harness the power of the .NET framework with the dynamic nature and elegant idioms of the Ruby language. The manner and parlance of Ruby that makes it a joy to work with sets of data is, of course, present in IronRuby — couple that with WPF's capability to produce great graphics quickly and easily, and I hope you can visualise the possibilities of data visualisation using these two things. Using IronRuby and WPF together to create visual representations of data and infographics is very exciting to me. Although today, with this project, we're only presenting one simple piece of information - the time - the potential is much grander. My day-to-day job is centred around software development and UI design, specifically in the realm of healthcare, and if you were to pay a visit to our office you would behold, directly above my desk, a large plasma TV with a constantly rotating, animated slideshow of charts and infographics to help members of our team do their jobs. It's an app powered by WPF which never fails to spark some conversation with visitors whose gaze has been hooked. If only it was written in IronRuby, the pleasantly low ceremony and reduced pre-processing time for my brain would have helped greatly. Edd Morgan blog Related Links: Getting PhP and Ruby working on Windows Azure and SQL Azure

  Read the article

• CodePlex Daily Summary for Wednesday, July 24, 2013

  CodePlex Daily Summary for Wednesday, July 24, 2013Popular ReleasesGeoTransformer: GeoTransformer 4.5: Extensions can now be installed and uninstalled from the application. The extensions update the same way as the application - silently and automatically. Added ability to search for caches by pressing CTRL+F in the table views. (Thanks to JanisU for implementing this request) Added ability to remove edited customizations for multiple caches at once (use SHIFT or CTRL to select multiple lines in the table). A new experimental version for Windows 8 RT (on ARM processor) is also made availa...Kartris E-commerce: Kartris v2.5003: This fixes an issue where search engines appear to identify as IE and so trigger the noIE page if there is not a non-responsive skin specified.VG-Ripper & PG-Ripper: VG-Ripper 2.9.45: changes NEW: Added Support for "ImgBabes.com" links NEW: Added Support for "ImagesIon.com" linksFamily Tree Analyzer: Version 1.5.3.0: Added a new Lost Cousins Report to the Lost Cousins tab. This report displays colour coded boxes for each census showing whether census data has been found and entered into Lost Cousins website for all the UK census years.Magelia WebStore Open-source Ecommerce software: Magelia WebStore 2.4: Magelia WebStore version 2.4 introduces new and improved features: Basket and order calculation have been redesigned with a more modular approach geographic zone algorithms for tax and shipping calculations have been re-developed. The Store service has been split in three services (store, basket, order). Product start and end dates have been added. For variant products a unique code has been introduced for the top (variable) product, product attributes can now be defined at the top ...LINQ to Twitter: LINQ to Twitter v2.1.08: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.AndroidCopyAndPaste: Capood: Erstes Release für Evaluation --> Changeset 26675AcDown?????: AcDown????? v4.4.3: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.4.3 ?? ??Bilibili????????????? ???????????? ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2.10?...Magick.NET: Magick.NET 6.8.6.601: Magick.NET linked with ImageMagick 6.8.6.6. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/C# Intellisense for Notepad++: Initial release: Members auto-complete Integration with native Notepad++ Auto-Completion Auto "open bracket" for methods Right-arrow to accept suggestions51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes.PantheR's GraphX for .NET: GraphX for .NET v0.9.5 BETA: BETA 0.9.5 + Added GraphArea.SaveAsImage() method that supports different image formats + Added GraphArea.UseNativeObjectArrange property. True by default. If set to False it will use different coordinates handling that helps to soften vertex drag issues to the top and left area sides. + Added GraphArea.Translation property. It is needed to get correct translation coordinates when determining object position from the mouse coordinates. + Added new VertexControl.PositionChanged event along wit....NET Code Migrator for Dynamics CRM: v1.0.12: Combined the main macros, generated macros from a sample organization, and the CreateVisualStudioMacros utility into a single package.DARF: Dynamic Application Runtime Framework: DARF.Demo: This demo is DARF.IDE application plus a sample file (calculator.xda) which describes a very simple calculator. All you need to do is to unzip the package, run DARF.IDE.exe and load calculator.xda then press F5 or select 'Execute' from 'Code' menu to see the execution of the application. The calculator.xda file is fully commented so you can inspect the file and get a feeling of the way DARF works. This sample application makes use of some pre-written blocks (namely button, textbox and ...) ...Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...CodeGen Code Generator: CodeGen 4.2.11: Changes in this release include: Added several new alternate forms of the <FIELD_SELWND> token to provide template developers better control over the case of field selection window names. Also added a new token <FIELD_SELWND_ORIGINAL> to preserve the case of selection window names in the same way that <FIELD_SELWND> used to. Enhanced UI Toolkit window script selection window processing (-ws) so that selection window names are no longer case sensitive (they aren't in UI Toolkit). Also the -w...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...Circuit Diagram: Circuit Diagram 2.0 Beta 2: New in this release: Show grid in editor Cut/copy/paste support Bug fixesCommunity TFS Build Extensions: July 2013: The July 2013 release contains VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 The Community TFS Build Manager can also be found in the Visual Studio Gallery here where updates will first become available. A version supporting VS2010 is also available in the Gallery here.New Projects.NET Weaver: This project is a base project to weave code in existing assemblies.AAP WB: aam aadmi party west bengal facebook appajax call wcf: it's about how to call wcf use ajax in asp.netBMI: Test ProjectCarWebOOB: Website for learning subject about object oriented databaseCloud Ninja Polyglot Persistence: The Cloud Ninja Polyglot Persistence project is a sample that demonstrates the use of multiple and different types of repositories to persist application data.ConsoleGamePacMan: C# console Implementation of popular game Pac-MancrawlerTeam: crawlerDB-Team-Project-Mimosa: Telerik Database Project Team MimosaDemoJS: Nonedeployspsolution: powershell snapin that mimics publishing behaviour of wsp sharepoint solution in visual studio.Du Lich Thanh Nien: Du L?ch Thanh NiênElectronic Commerce Resource Planning: Electronic Commerce Resource PlanningGnuPGNotepad: A notepad based GUI for GnuPG (PGP) which allows you to Encrypt/Decrypt on the fly, or save & load encrypted to disk without using temporary clear text files.modbusclasslabrarycsharp: Summary MvcAppTestSolution: MVCNext Inventory: NextInventory is an open source application. Native in the ASP.Net MVC4.Org Chart in SharePoint 2010 using Google API.: Organization Chart webpart for SharePoint 2010 using Google API and SharePoint list as the data source. Good for small organizations with no AD hierarchy.Parsec SWTOR Parser: .NET Combat Log Parser Windows Application for SWTOR (Star Wars the Old Republic)Portable Imaging Library for .NET: Portable Imaging Library for asynchronous loading, modifying and saving images from any thread (out of UI thread for WPF/WP8).Powershell MetadataExplorer: Windows Powershell SnapIn that includes the Get-ItemMetadata cmdlet. The Get-ItemMetadata cmdlet retrieves extended metadata associated with file system items.Pseudogenerator: Pseudogenerator es un generador de numeros pseudoaleatorios compatible con una variedad de metodos de generacion. Muy util en el area de simulaciones digitales.PushIt!: Very interesting arcade game.S3Console: This project is an initiative to create shell like interactive console application to administer amazon s3 using c#.net.Sample VariableSizedWrapGrid Windows Phone: This example gives an idea of ​​how to make the size of a list item dynamically. In this case a user control that has been created by VariableSizedWrapGrid kinnSchool CMS: School CMS is a school content management system, written in PHP and run from a single MySQL Database. Anyone can use school cms.Sys: This is library of collection of most used .NET components implemented in C#VariousPublicExperiments: This project contains various experiments, publish for educational purposes. These projects may later on be branched to their own repositories.VBDownloader: *VBDownloader* _The open source solution for downloading_wechat demo: wechat demoZing State Explorer: Zing is a state explorer for models of concurrent and asynchronous programs.

  Read the article

• Caveats with the runAllManagedModulesForAllRequests in IIS 7/8

  - by Rick Strahl

  One of the nice enhancements in IIS 7 (and now 8) is the ability to be able to intercept non-managed - ie. non ASP.NET served - requests from within ASP.NET managed modules. This opened up a ton of new functionality that could be applied across non-managed content using .NET code. I thought I had a pretty good handle on how IIS 7's Integrated mode pipeline works, but when I put together some samples last tonight I realized that the way that managed and unmanaged requests fire into the pipeline is downright confusing especially when it comes to the runAllManagedModulesForAllRequests attribute. There are a number of settings that can affect whether a managed module receives non-ASP.NET content requests such as static files or requests from other frameworks like PHP or ASP classic, and this is topic of this blog post. Native and Managed Modules The integrated mode IIS pipeline for IIS 7 and later - as the name suggests - allows for integration of ASP.NET pipeline events in the IIS request pipeline. Natively IIS runs unmanaged code and there are a host of native mode modules that handle the core behavior of IIS. If you set up a new IIS site or application without managed code support only the native modules are supported and fired without any interaction between native and managed code. If you use the Integrated pipeline with managed code enabled however things get a little more confusing as there both native modules and .NET managed modules can fire against the same IIS request. If you open up the IIS Modules dialog you see both managed and unmanaged modules. Unmanaged modules point at physical files on disk, while unmanaged modules point at .NET types and files referenced from the GAC or the current project's BIN folder. Both native and managed modules can co-exist and execute side by side and on the same request. When running in IIS 7 the IIS pipeline actually instantiates a the ASP.NET  runtime (via the System.Web.PipelineRuntime class) which unlike the core HttpRuntime classes in ASP.NET receives notification callbacks when IIS integrated mode events fire. The IIS pipeline is smart enough to detect whether managed handlers are attached and if they're none these notifications don't fire, improving performance. The good news about all of this for .NET devs is that ASP.NET style modules can be used for just about every kind of IIS request. All you need to do is create a new Web Application and enable ASP.NET on it, and then attach managed handlers. Handlers can look at ASP.NET content (ie. ASPX pages, MVC, WebAPI etc. requests) as well as non-ASP.NET content including static content like HTML files, images, javascript and css resources etc. It's very cool that this capability has been surfaced. However, with that functionality comes a lot of responsibility. Because every request passes through the ASP.NET pipeline if managed modules (or handlers) are attached there are possible performance implications that come with it. Running through the ASP.NET pipeline does add some overhead. ASP.NET and Your Own Modules When you create a new ASP.NET project typically the Visual Studio templates create the modules section like this: <system.webServer> <validation validateIntegratedModeConfiguration="false" /> <modules runAllManagedModulesForAllRequests="true" > </modules> </system.webServer> Specifically the interesting thing about this is the runAllManagedModulesForAllRequest="true" flag, which seems to indicate that it controls whether any registered modules always run, even when the value is set to false. Realistically though this flag does not control whether managed code is fired for all requests or not. Rather it is an override for the preCondition flag on a particular handler. With the flag set to the default true setting, you can assume that pretty much every IIS request you receive ends up firing through your ASP.NET module pipeline and every module you have configured is accessed even by non-managed requests like static files. In other words, your module will have to handle all requests. Now so far so obvious. What's not quite so obvious is what happens when you set the runAllManagedModulesForAllRequest="false". You probably would expect that immediately the non-ASP.NET requests no longer get funnelled through the ASP.NET Module pipeline. But that's not what actually happens. For example, if I create a module like this:<add name="SharewareModule" type="HowAspNetWorks.SharewareMessageModule" /> by default it will fire against ALL requests regardless of the runAllManagedModulesForAllRequests flag. Even if the value runAllManagedModulesForAllRequests="false", the module is fired. Not quite expected. So what is the runAllManagedModulesForAllRequests really good for? It's essentially an override for managedHandler preCondition. If I declare my handler in web.config like this:<add name="SharewareModule" type="HowAspNetWorks.SharewareMessageModule" preCondition="managedHandler" /> and the runAllManagedModulesForAllRequests="false" my module only fires against managed requests. If I switch the flag to true, now my module ends up handling all IIS requests that are passed through from IIS. The moral of the story here is that if you intend to only look at ASP.NET content, you should always set the preCondition="managedHandler" attribute to ensure that only managed requests are fired on this module. But even if you do this, realize that runAllManagedModulesForAllRequests="true" can override this setting. runAllManagedModulesForAllRequests and Http Application Events Another place the runAllManagedModulesForAllRequest attribute affects is the Global Http Application object (typically in global.asax) and the Application_XXXX events that you can hook up there. So while the events there are dynamically hooked up to the application class, they basically behave as if they were set with the preCodition="managedHandler" configuration switch. The end result is that if you have runAllManagedModulesForAllRequests="true" you'll see every Http request passed through the Application_XXXX events, and you only see ASP.NET requests with the flag set to "false". What's all that mean? Configuring an application to handle requests for both ASP.NET and other content requests can be tricky especially if you need to mix modules that might require both. Couple of things are important to remember. If your module doesn't need to look at every request, by all means set a preCondition="managedHandler" on it. This will at least allow it to respond to the runAllManagedModulesForAllRequests="false" flag and then only process ASP.NET requests. Look really carefully to see whether you actually need runAllManagedModulesForAllRequests="true" in your applications as set by the default new project templates in Visual Studio. Part of the reason, this is the default because it was required for the initial versions of IIS 7 and ASP.NET 2 in order to handle MVC extensionless URLs. However, if you are running IIS 7 or later and .NET 4.0 you can use the ExtensionlessUrlHandler instead to allow you MVC functionality without requiring runAllManagedModulesForAllRequests="true": <handlers> <remove name="ExtensionlessUrlHandler-Integrated-4.0" /> <add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" /> </handlers> Oddly this is the default for Visual Studio 2012 MVC template apps, so I'm not sure why the default template still adds runAllManagedModulesForAllRequests="true" is - it should be enabled only if there's a specific need to access non ASP.NET requests. As a side note, it's interesting that when you access a static HTML resource, you can actually write into the Response object and get the output to show, which is trippy. I haven't looked closely to see how this works - whether ASP.NET just fires directly into the native output stream or whether the static requests are re-routed directly through the ASP.NET pipeline once a managed code module is detected. This doesn't work for all non ASP.NET resources - for example, I can't do the same with ASP classic requests, but it makes for an interesting demo when injecting HTML content into a static HTML page :-) Note that on the original Windows Server 2008 and Vista (IIS 7.0) you might need a HotFix in order for ExtensionLessUrlHandler to work properly for MVC projects. On my live server I needed it (about 6 months ago), but others have observed that the latest service updates have integrated this functionality and the hotfix is not required. On IIS 7.5 and later I've not needed any patches for things to just work. Plan for non-ASP.NET Requests It's important to remember that if you write a .NET Module to run on IIS 7, there's no way for you to prevent non-ASP.NET requests from hitting your module. So make sure you plan to support requests to extensionless URLs, to static resources like files. Luckily ASP.NET creates a full Request and full Response object for you for non ASP.NET content. So even for static files and even for ASP classic for example, you can look at Request.FilePath or Request.ContentType (in post handler pipeline events) to determine what content you are dealing with. As always with Module design make sure you check for the conditions in your code that make the module applicable and if a filter fails immediately exit - minimize the code that runs if your module doesn't need to process the request.© Rick Strahl, West Wind Technologies, 2005-2012Posted in IIS7   ASP.NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Making a Statement: How to retrieve the T-SQL statement that caused an event

  - by extended_events

  If you’ve done any troubleshooting of T-SQL, you know that sooner or later, probably sooner, you’re going to want to take a look at the actual statements you’re dealing with. In extended events we offer an action (See the BOL topic that covers Extended Events Objects for a description of actions) named sql_text that seems like it is just the ticket. Well…not always – sounds like a good reason for a blog post. When is a statement not THE statement? The sql_text action returns the same information that is returned from DBCC INPUTBUFFER, which may or may not be what you want. For example, if you execute a stored procedure, the sql_text action will return something along the lines of “EXEC sp_notwhatiwanted” assuming that is the statement you sent from the client. Often times folks would like something more specific, like the actual statements that are being run from within the stored procedure or batch. Enter the stack Extended events offers another action, this one with the descriptive name of tsql_stack, that includes the sql_handle and offset information about the statements being run when an event occurs. With the sql_handle and offset values you can retrieve the specific statement you seek using the DMV dm_exec_sql_statement. The BOL topic for dm_exec_sql_statement provides an example for how to extract this information, so I’ll cover the gymnastics required to get the sql_handle and offset values out of the tsql_stack data collected by the action. I’m the first to admit that this isn’t pretty, but this is what we have in SQL Server 2008 and 2008 R2. We will be making it easier to get statement level information in the next major release of SQL Server. The sample code For this example I have a stored procedure that includes multiple statements and I have a need to differentiate between those two statements in my tracing. I’m going to track two events: module_end tracks the completion of the stored procedure execution and sp_statement_completed tracks the execution of each statement within a stored procedure. I’m adding the tsql_stack events (since that’s the topic of this post) and the sql_text action for comparison sake. (If you have questions about creating event sessions, check out Pedro’s post Introduction to Extended Events.) USE AdventureWorks2008GO -- Test SPCREATE PROCEDURE sp_multiple_statementsASSELECT 'This is the first statement'SELECT 'this is the second statement'GO -- Create a session to look at the spCREATE EVENT SESSION track_sprocs ON SERVERADD EVENT sqlserver.module_end (ACTION (sqlserver.tsql_stack, sqlserver.sql_text)),ADD EVENT sqlserver.sp_statement_completed (ACTION (sqlserver.tsql_stack, sqlserver.sql_text))ADD TARGET package0.ring_bufferWITH (MAX_DISPATCH_LATENCY = 1 SECONDS)GO -- Start the sessionALTER EVENT SESSION track_sprocs ON SERVERSTATE = STARTGO -- Run the test procedureEXEC sp_multiple_statementsGO -- Stop collection of events but maintain ring bufferALTER EVENT SESSION track_sprocs ON SERVERDROP EVENT sqlserver.module_end,DROP EVENT sqlserver.sp_statement_completedGO Aside: Altering the session to drop the events is a neat little trick that allows me to stop collection of events while keeping in-memory targets such as the ring buffer available for use. If you stop the session the in-memory target data is lost. Now that we’ve collected some events related to running the stored procedure, we need to do some processing of the data. I’m going to do this in multiple steps using temporary tables so you can see what’s going on; kind of like having to “show your work” on a math test. The first step is to just cast the target data into XML so I can work with it. After that you can pull out the interesting columns, for our purposes I’m going to limit the output to just the event name, object name, stack and sql text. You can see that I’ve don a second CAST, this time of the tsql_stack column, so that I can further process this data. -- Store the XML data to a temp tableSELECT CAST( t.target_data AS XML) xml_dataINTO #xml_event_dataFROM sys.dm_xe_sessions s INNER JOIN sys.dm_xe_session_targets t    ON s.address = t.event_session_addressWHERE s.name = 'track_sprocs' SELECT * FROM #xml_event_data -- Parse the column data out of the XML blockSELECT    event_xml.value('(./@name)', 'varchar(100)') as [event_name],    event_xml.value('(./data[@name="object_name"]/value)[1]', 'varchar(255)') as [object_name],    CAST(event_xml.value('(./action[@name="tsql_stack"]/value)[1]','varchar(MAX)') as XML) as [stack_xml],    event_xml.value('(./action[@name="sql_text"]/value)[1]', 'varchar(max)') as [sql_text]INTO #event_dataFROM #xml_event_data    CROSS APPLY xml_data.nodes('//event') n (event_xml) SELECT * FROM #event_data event_name object_name stack_xml sql_text sp_statement_completed NULL <frame level="1" handle="0x03000500D0057C1403B79600669D00000100000000000000" line="4" offsetStart="94" offsetEnd="172" /><frame level="2" handle="0x01000500CF3F0331B05EC084000000000000000000000000" line="1" offsetStart="0" offsetEnd="-1" /> EXEC sp_multiple_statements sp_statement_completed NULL <frame level="1" handle="0x03000500D0057C1403B79600669D00000100000000000000" line="6" offsetStart="174" offsetEnd="-1" /><frame level="2" handle="0x01000500CF3F0331B05EC084000000000000000000000000" line="1" offsetStart="0" offsetEnd="-1" /> EXEC sp_multiple_statements module_end sp_multiple_statements <frame level="1" handle="0x03000500D0057C1403B79600669D00000100000000000000" line="0" offsetStart="0" offsetEnd="0" /><frame level="2" handle="0x01000500CF3F0331B05EC084000000000000000000000000" line="1" offsetStart="0" offsetEnd="-1" /> EXEC sp_multiple_statements After parsing the columns it’s easier to see what is recorded. You can see that I got back two sp_statement_completed events, which makes sense given the test procedure I’m running, and I got back a single module_end for the entire statement. As described, the sql_text isn’t telling me what I really want to know for the first two events so a little extra effort is required. -- Parse the tsql stack information into columnsSELECT    event_name,    object_name,    frame_xml.value('(./@level)', 'int') as [frame_level],    frame_xml.value('(./@handle)', 'varchar(MAX)') as [sql_handle],    frame_xml.value('(./@offsetStart)', 'int') as [offset_start],    frame_xml.value('(./@offsetEnd)', 'int') as [offset_end]INTO #stack_data    FROM #event_data        CROSS APPLY    stack_xml.nodes('//frame') n (frame_xml)    SELECT * from #stack_data event_name object_name frame_level sql_handle offset_start offset_end sp_statement_completed NULL 1 0x03000500D0057C1403B79600669D00000100000000000000 94 172 sp_statement_completed NULL 2 0x01000500CF3F0331B05EC084000000000000000000000000 0 -1 sp_statement_completed NULL 1 0x03000500D0057C1403B79600669D00000100000000000000 174 -1 sp_statement_completed NULL 2 0x01000500CF3F0331B05EC084000000000000000000000000 0 -1 module_end sp_multiple_statements 1 0x03000500D0057C1403B79600669D00000100000000000000 0 0 module_end sp_multiple_statements 2 0x01000500CF3F0331B05EC084000000000000000000000000 0 -1 Parsing out the stack information doubles the fun and I get two rows for each event. If you examine the stack from the previous table, you can see that each stack has two frames and my query is parsing each event into frames, so this is expected. There is nothing magic about the two frames, that’s just how many I get for this example, it could be fewer or more depending on your statements. The key point here is that I now have a sql_handle and the offset values for those handles, so I can use dm_exec_sql_statement to get the actual statement. Just a reminder, this DMV can only return what is in the cache – if you have old data it’s possible your statements have been ejected from the cache. “Old” is a relative term when talking about caches and can be impacted by server load and how often your statement is actually used. As with most things in life, your mileage may vary. SELECT    qs.*,     SUBSTRING(st.text, (qs.offset_start/2)+1,         ((CASE qs.offset_end          WHEN -1 THEN DATALENGTH(st.text)         ELSE qs.offset_end         END - qs.offset_start)/2) + 1) AS statement_textFROM #stack_data AS qsCROSS APPLY sys.dm_exec_sql_text(CONVERT(varbinary(max),sql_handle,1)) AS st event_name object_name frame_level sql_handle offset_start offset_end statement_text sp_statement_completed NULL 1 0x03000500D0057C1403B79600669D00000100000000000000 94 172 SELECT 'This is the first statement' sp_statement_completed NULL 1 0x03000500D0057C1403B79600669D00000100000000000000 174 -1 SELECT 'this is the second statement' module_end sp_multiple_statements 1 0x03000500D0057C1403B79600669D00000100000000000000 0 0 C Now that looks more like what we were after, the statement_text field is showing the actual statement being run when the sp_statement_completed event occurs. You’ll notice that it’s back down to one row per event, what happened to frame 2? The short answer is, “I don’t know.” In SQL Server 2008 nothing is returned from dm_exec_sql_statement for the second frame and I believe this to be a bug; this behavior has changed in the next major release and I see the actual statement run from the client in frame 2. (In other words I see the same statement that is returned by the sql_text action  or DBCC INPUTBUFFER) There is also something odd going on with frame 1 returned from the module_end event; you can see that the offset values are both 0 and only the first letter of the statement is returned. It seems like the offset_end should actually be –1 in this case and I’m not sure why it’s not returning this correctly. This behavior is being investigated and will hopefully be corrected in the next major version. You can workaround this final oddity by ignoring the offsets and just returning the entire cached statement. SELECT    event_name,    sql_handle,    ts.textFROM #stack_data    CROSS APPLY sys.dm_exec_sql_text(CONVERT(varbinary(max),sql_handle,1)) as ts event_name sql_handle text sp_statement_completed 0x0300070025999F11776BAF006F9D00000100000000000000 CREATE PROCEDURE sp_multiple_statements AS SELECT 'This is the first statement' SELECT 'this is the second statement' sp_statement_completed 0x0300070025999F11776BAF006F9D00000100000000000000 CREATE PROCEDURE sp_multiple_statements AS SELECT 'This is the first statement' SELECT 'this is the second statement' module_end 0x0300070025999F11776BAF006F9D00000100000000000000 CREATE PROCEDURE sp_multiple_statements AS SELECT 'This is the first statement' SELECT 'this is the second statement' Obviously this gives more than you want for the sp_statement_completed events, but it’s the right information for module_end. I leave it to you to determine when this information is needed and use the workaround when appropriate. Aside: You might think it’s odd that I’m showing apparent bugs with my samples, but you’re going to see this behavior if you use this method, so you need to know about it.I’m all about transparency. Happy Eventing- Mike Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Spooling in SQL execution plans

  - by Rob Farley

  Sewing has never been my thing. I barely even know the terminology, and when discussing this with American friends, I even found out that half the words that Americans use are different to the words that English and Australian people use. That said – let’s talk about spools! In particular, the Spool operators that you find in some SQL execution plans. This post is for T-SQL Tuesday, hosted this month by me! I’ve chosen to write about spools because they seem to get a bad rap (even in my song I used the line “There’s spooling from a CTE, they’ve got recursion needlessly”). I figured it was worth covering some of what spools are about, and hopefully explain why they are remarkably necessary, and generally very useful. If you have a look at the Books Online page about Plan Operators, at http://msdn.microsoft.com/en-us/library/ms191158.aspx, and do a search for the word ‘spool’, you’ll notice it says there are 46 matches. 46! Yeah, that’s what I thought too... Spooling is mentioned in several operators: Eager Spool, Lazy Spool, Index Spool (sometimes called a Nonclustered Index Spool), Row Count Spool, Spool, Table Spool, and Window Spool (oh, and Cache, which is a special kind of spool for a single row, but as it isn’t used in SQL 2012, I won’t describe it any further here). Spool, Table Spool, Index Spool, Window Spool and Row Count Spool are all physical operators, whereas Eager Spool and Lazy Spool are logical operators, describing the way that the other spools work. For example, you might see a Table Spool which is either Eager or Lazy. A Window Spool can actually act as both, as I’ll mention in a moment. In sewing, cotton is put onto a spool to make it more useful. You might buy it in bulk on a cone, but if you’re going to be using a sewing machine, then you quite probably want to have it on a spool or bobbin, which allows it to be used in a more effective way. This is the picture that I want you to think about in relation to your data. I’m sure you use spools every time you use your sewing machine. I know I do. I can’t think of a time when I’ve got out my sewing machine to do some sewing and haven’t used a spool. However, I often run SQL queries that don’t use spools. You see, the data that is consumed by my query is typically in a useful state without a spool. It’s like I can just sew with my cotton despite it not being on a spool! Many of my favourite features in T-SQL do like to use spools though. This looks like a very similar query to before, but includes an OVER clause to return a column telling me the number of rows in my data set. I’ll describe what’s going on in a few paragraphs’ time. So what does a Spool operator actually do? The spool operator consumes a set of data, and stores it in a temporary structure, in the tempdb database. This structure is typically either a Table (ie, a heap), or an Index (ie, a b-tree). If no data is actually needed from it, then it could also be a Row Count spool, which only stores the number of rows that the spool operator consumes. A Window Spool is another option if the data being consumed is tightly linked to windows of data, such as when the ROWS/RANGE clause of the OVER clause is being used. You could maybe think about the type of spool being like whether the cotton is going onto a small bobbin to fit in the base of the sewing machine, or whether it’s a larger spool for the top. A Table or Index Spool is either Eager or Lazy in nature. Eager and Lazy are Logical operators, which talk more about the behaviour, rather than the physical operation. If I’m sewing, I can either be all enthusiastic and get all my cotton onto the spool before I start, or I can do it as I need it. “Lazy” might not the be the best word to describe a person – in the SQL world it describes the idea of either fetching all the rows to build up the whole spool when the operator is called (Eager), or populating the spool only as it’s needed (Lazy). Window Spools are both physical and logical. They’re eager on a per-window basis, but lazy between windows. And when is it needed? The way I see it, spools are needed for two reasons. 1 – When data is going to be needed AGAIN. 2 – When data needs to be kept away from the original source. If you’re someone that writes long stored procedures, you are probably quite aware of the second scenario. I see plenty of stored procedures being written this way – where the query writer populates a temporary table, so that they can make updates to it without risking the original table. SQL does this too. Imagine I’m updating my contact list, and some of my changes move data to later in the book. If I’m not careful, I might update the same row a second time (or even enter an infinite loop, updating it over and over). A spool can make sure that I don’t, by using a copy of the data. This problem is known as the Halloween Effect (not because it’s spooky, but because it was discovered in late October one year). As I’m sure you can imagine, the kind of spool you’d need to protect against the Halloween Effect would be eager, because if you’re only handling one row at a time, then you’re not providing the protection... An eager spool will block the flow of data, waiting until it has fetched all the data before serving it up to the operator that called it. In the query below I’m forcing the Query Optimizer to use an index which would be upset if the Name column values got changed, and we see that before any data is fetched, a spool is created to load the data into. This doesn’t stop the index being maintained, but it does mean that the index is protected from the changes that are being done. There are plenty of times, though, when you need data repeatedly. Consider the query I put above. A simple join, but then counting the number of rows that came through. The way that this has executed (be it ideal or not), is to ask that a Table Spool be populated. That’s the Table Spool operator on the top row. That spool can produce the same set of rows repeatedly. This is the behaviour that we see in the bottom half of the plan. In the bottom half of the plan, we see that the a join is being done between the rows that are being sourced from the spool – one being aggregated and one not – producing the columns that we need for the query. Table v Index When considering whether to use a Table Spool or an Index Spool, the question that the Query Optimizer needs to answer is whether there is sufficient benefit to storing the data in a b-tree. The idea of having data in indexes is great, but of course there is a cost to maintaining them. Here we’re creating a temporary structure for data, and there is a cost associated with populating each row into its correct position according to a b-tree, as opposed to simply adding it to the end of the list of rows in a heap. Using a b-tree could even result in page-splits as the b-tree is populated, so there had better be a reason to use that kind of structure. That all depends on how the data is going to be used in other parts of the plan. If you’ve ever thought that you could use a temporary index for a particular query, well this is it – and the Query Optimizer can do that if it thinks it’s worthwhile. It’s worth noting that just because a Spool is populated using an Index Spool, it can still be fetched using a Table Spool. The details about whether or not a Spool used as a source shows as a Table Spool or an Index Spool is more about whether a Seek predicate is used, rather than on the underlying structure. Recursive CTE I’ve already shown you an example of spooling when the OVER clause is used. You might see them being used whenever you have data that is needed multiple times, and CTEs are quite common here. With the definition of a set of data described in a CTE, if the query writer is leveraging this by referring to the CTE multiple times, and there’s no simplification to be leveraged, a spool could theoretically be used to avoid reapplying the CTE’s logic. Annoyingly, this doesn’t happen. Consider this query, which really looks like it’s using the same data twice. I’m creating a set of data (which is completely deterministic, by the way), and then joining it back to itself. There seems to be no reason why it shouldn’t use a spool for the set described by the CTE, but it doesn’t. On the other hand, if we don’t pull as many columns back, we might see a very different plan. You see, CTEs, like all sub-queries, are simplified out to figure out the best way of executing the whole query. My example is somewhat contrived, and although there are plenty of cases when it’s nice to give the Query Optimizer hints about how to execute queries, it usually doesn’t do a bad job, even without spooling (and you can always use a temporary table). When recursion is used, though, spooling should be expected. Consider what we’re asking for in a recursive CTE. We’re telling the system to construct a set of data using an initial query, and then use set as a source for another query, piping this back into the same set and back around. It’s very much a spool. The analogy of cotton is long gone here, as the idea of having a continual loop of cotton feeding onto a spool and off again doesn’t quite fit, but that’s what we have here. Data is being fed onto the spool, and getting pulled out a second time when the spool is used as a source. (This query is running on AdventureWorks, which has a ManagerID column in HumanResources.Employee, not AdventureWorks2012) The Index Spool operator is sucking rows into it – lazily. It has to be lazy, because at the start, there’s only one row to be had. However, as rows get populated onto the spool, the Table Spool operator on the right can return rows when asked, ending up with more rows (potentially) getting back onto the spool, ready for the next round. (The Assert operator is merely checking to see if we’ve reached the MAXRECURSION point – it vanishes if you use OPTION (MAXRECURSION 0), which you can try yourself if you like). Spools are useful. Don’t lose sight of that. Every time you use temporary tables or table variables in a stored procedure, you’re essentially doing the same – don’t get upset at the Query Optimizer for doing so, even if you think the spool looks like an expensive part of the query. I hope you’re enjoying this T-SQL Tuesday. Why not head over to my post that is hosting it this month to read about some other plan operators? At some point I’ll write a summary post – once I have you should find a comment below pointing at it. @rob_farley

  Read the article

• SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

  - by digby280

  I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Enum driving a Visual State change via the ViewModel

  - by Chris Skardon

  Exciting title eh? So, here’s the problem, I want to use my ViewModel to drive my Visual State, I’ve used the ‘DataStateBehavior’ before, but the trouble with it is that it only works for bool values, and the minute you jump to more than 2 Visual States, you’re kind of screwed. A quick search has shown up a couple of points of interest, first, the DataStateSwitchBehavior, which is part of the Expression Samples (on Codeplex), and also available via Pete Blois’ blog. The second interest is to use a DataTrigger with GoToStateAction (from the Silverlight forums). So, onwards… first let’s create a basic switch Visual State, so, a DataObj with one property: IsAce… public class DataObj : NotifyPropertyChanger { private bool _isAce; public bool IsAce { get { return _isAce; } set { _isAce = value; RaisePropertyChanged("IsAce"); } } } The ‘NotifyPropertyChanger’ is literally a base class with RaisePropertyChanged, implementing INotifyPropertyChanged. OK, so we then create a ViewModel: public class MainPageViewModel : NotifyPropertyChanger { private DataObj _dataObj; public MainPageViewModel() { DataObj = new DataObj {IsAce = true}; ChangeAcenessCommand = new RelayCommand(() => DataObj.IsAce = !DataObj.IsAce); } public ICommand ChangeAcenessCommand { get; private set; } public DataObj DataObj { get { return _dataObj; } set { _dataObj = value; RaisePropertyChanged("DataObj"); } } } Aaaand finally – hook it all up to the XAML, which is a very simple UI: A Rectangle, a TextBlock and a Button. The Button is hooked up to ChangeAcenessCommand, the TextBlock is bound to the ‘DataObj.IsAce’ property and the Rectangle has 2 visual states: IsAce and NotAce. To make the Rectangle change it’s visual state I’ve used a DataStateBehavior inside the Layout Root Grid: <i:Interaction.Behaviors> <ei:DataStateBehavior Binding="{Binding DataObj.IsAce}" Value="true" TrueState="IsAce" FalseState="NotAce"/> </i:Interaction.Behaviors> So now we have the button changing the ‘IsAce’ property and giving us the other visual state: Great! So – the next stage is to get that to work inside a DataTemplate… Which (thankfully) is easy money. All we do is add a ListBox to the View and an ObservableCollection to the ViewModel. Well – ok, a little bit more than that. Once we’ve got the ListBox with it’s ItemsSource property set, it’s time to add the DataTemplate itself. Again, this isn’t exactly taxing, and is purely going to be a Grid with a Textblock and a Rectangle (again, I’m nothing if not consistent). Though, to be a little jazzy I’ve swapped the rectangle to the other side (living the dream). So, all that’s left is to add some States to the template.. (Yes – you can do that), these can be the same names as the others, or indeed, something else, I have chosen to stick with the same names and take the extra confusion hit right on the nose. Once again, I add the DataStateBehavior to the root Grid element: <i:Interaction.Behaviors> <ei:DataStateBehavior Binding="{Binding IsAce}" Value="true" TrueState="IsAce" FalseState="NotAce"/> </i:Interaction.Behaviors> The key difference here is the ‘Binding’ attribute, where I’m now binding to the IsAce property directly, and boom! It’s all gravy!   So far, so good. We can use boolean values to change the visual states, and (crucially) it works in a DataTemplate, bingo! Now. Onwards to the Enum part of this (finally!). Obviously we can’t use the DataStateBehavior, it' only gives us true/false options. So, let’s give the GoToStateAction a go. Now, I warn you, things get a bit complex from here, instead of a bool with 2 values, I’m gonna max it out and bring in an Enum with 3 (count ‘em) 3 values: Red, Amber and Green (those of you with exceptionally sharp minds will be reminded of traffic lights). We’re gonna have a rectangle which also has 3 visual states – cunningly called ‘Red’, ‘Amber’ and ‘Green’. A new class called DataObj2: public class DataObj2 : NotifyPropertyChanger { private Status _statusValue; public DataObj2(Status status) { StatusValue = status; } public Status StatusValue { get { return _statusValue; } set { _statusValue = value; RaisePropertyChanged("StatusValue"); } } } Where ‘Status’ is my enum. Good times are here! Ok, so let’s get to the beefy stuff. So, we’ll start off in the same manner as the last time, we will have a single DataObj2 instance available to the Page and bind to that. Let’s add some Triggers (these are in the LayoutRoot again). <i:Interaction.Triggers> <ei:DataTrigger Binding="{Binding DataObject2.StatusValue}" Value="Amber"> <ei:GoToStateAction StateName="Amber" UseTransitions="False" /> </ei:DataTrigger> <ei:DataTrigger Binding="{Binding DataObject2.StatusValue}" Value="Green"> <ei:GoToStateAction StateName="Green" UseTransitions="False" /> </ei:DataTrigger> <ei:DataTrigger Binding="{Binding DataObject2.StatusValue}" Value="Red"> <ei:GoToStateAction StateName="Red" UseTransitions="False" /> </ei:DataTrigger> </i:Interaction.Triggers> So what we’re saying here is that when the DataObject2.StatusValue is equal to ‘Red’ then we’ll go to the ‘Red’ state. Same deal for Green and Amber (but you knew that already). Hook it all up and start teh project. Hmm. Just grey. Not what I wanted. Ok, let’s add a ‘ChangeStatusCommand’, hook that up to a button and give it a whirl: Right, so the DataTrigger isn’t picking up the data on load. On the plus side, changing the status is making the visual states change. So. We’ll cross the ‘Grey’ hurdle in a bit, what about doing the same in the DataTemplate? <Codey Codey/> Grey again, but if we press the button: (I should mention, pressing the button sets the StatusValue property on the DataObj2 being represented to the next colour). Right. Let’s look at this ‘Grey’ issue. First ‘fix’ (and I use the term ‘fix’ in a very loose way): The Dispatcher Fix This involves using the Dispatcher on the View to call something like ‘RefreshProperties’ on the ViewModel, which will in turn raise all the appropriate ‘PropertyChanged’ events on the data objects being represented. So, here goes, into turdcode-ville – population – me: First, add the ‘RefreshProperties’ method to the DataObj2: internal void RefreshProperties() { RaisePropertyChanged("StatusValue"); } (shudder) Now, add it to the hosting ViewModel: public void RefreshProperties() { DataObject2.RefreshProperties(); if (DataObjects != null && DataObjects.Count > 0) { foreach (DataObj2 dataObject in DataObjects) dataObject.RefreshProperties(); } } (double shudder) and now for the cream on the cake, adding the following line to the code behind of the View: Dispatcher.BeginInvoke(() => ((MoreVisualStatesViewModel)DataContext).RefreshProperties()); So, what does this *ahem* code give us: Awesome, it makes the single bound data object show the colour, but frankly ignores the DataTemplate items. This (by the way) is the same output you get from: Dispatcher.BeginInvoke(() => ((MoreVisualStatesViewModel)DataContext).ChangeStatusCommand.Execute(null)); So… Where does that leave me? What about adding a button to the Page to refresh the properties – maybe it’s a timer thing? Yes, that works. Right, what about using the Loaded event then eh? Loaded += (s, e) => ((MoreVisualStatesViewModel) DataContext).RefreshProperties(); Ahhh No. What about converting the DataTemplate into a UserControl? Anything is worth a shot.. Though – I still suspect I’m going to have to ‘RefreshProperties’ if I want the rectangles to update. Still. No. This DataTemplate DataTrigger binding is becoming a bit of a pain… I can’t add a ‘refresh’ button to the actual code base, it’s not exactly user friendly. I’m going to end this one now, and put some investigating into the use of the DataStateSwitchBehavior (all the ones I’ve found, well, all 2 of them are working in SL3, but not 4…)

  Read the article

• CodePlex Daily Summary for Monday, October 07, 2013

  CodePlex Daily Summary for Monday, October 07, 2013Popular ReleasesGhostscript.NET: Ghostscript.NET v.1.1.0.: v.1.1.0. added GhostscriptViewer state handling (SaveState, RestoreState) GhostscriptRasterizer constructor is extended in order to support usage of the existing GhostscriptViewer instance. fixed problem while using a 32-bit assembly with 32-bit version of Ghostscript on 64-bit Windows: It couldn't find a registry key of installed Ghostscript. Reported and fixed by "r0land". v.1.0.9. implemented EPS (Encapsulated PostScript) support for the GhostscriptViewer. added GhostscriptRasterize...Ghostscript Studio: Ghostscript.Studio v.1.0.2: Ghostscript Studio is easy to use Ghostscript IDE, a tool that facilitates the use of the Ghostscript interpreter by providing you with a graphical interface for postscript editing and file conversions. Ghostscript Studio allows you to preview postscript files, edit the code and execute them in order to convert PDF documents and other formats. The program allows you to convert between PDF, Postscript, EPS, TIFF, JPG and PNG by using the Ghostscript.NET Processor. v.1.0.2. added custom -c s...cmdradio: v0.1.1 binary: Default download in win32. For other OS see here. This is alpha version. Please report all bugs.Media Companion: Media Companion MC3.579b: Fixed IMDB actor scraping for Movies and TV. Note: there are a couple of new functions that are not active, as this release needed to be done due to IMDB change. New* TV - context menu for rescrapeing Poster image/Banner image Fixed* Both - Fixed actor scraping from IMDB * Movie - Fixed Tableview if Movie's movieset was not in MC's list of moviesets * Movie - Rename with mediainfo now lowercase. * Both - added ignore "A " in titles. Separate option in General Preferences. * Tv - Changing ...VidCoder: 1.5.7 Beta: Updated HandBrake core to SVN 4819. About dialog now pulls down HandBrake version from the DLL. Added a confirmation dialog to Stop if the encode has been going on for more than 5 minutes. Fixed handling of unicode characters for input and output filenames. We now encode to UTF-8 before passing to HandBrake. Fixed a crash in the queue multiple titles dialog. Added code to rescue tool windows which get placed outside of the visible screen area.Wsus Package Publisher: Release v1.3.1310.05: Enhance the "Reboot Remote Computers", by adding a timer before the reboot occure. So that remote users can save their documents and close applications. You can also add a message to be display. In 'Tools'->'Settings'-> Misc Tab, you can set a default message. Enhance the "Compare Computers against AD", by choosing OUs to include in the comparison.Event-Based Components AppBuilder: AB3.Iteration.53: Iteration 53 (Feature): Allow drag&drop of existing component (flow, step) from component list to chart. Duplicate names are automatically recognized and solved. By the color of the draged component you can see what kind of component (flow or step) is currently draged. New: AddExistingComponentFlow, PartDragDropEventHandler, ExistingStepPreparerPulse: Pulse 0.6.7.3: Pulse is now accepting donations. To donate by Bitcoin or PayPal see https://pulse.codeplex.com/wikipage?title=Donations Lots of updates in v0.6.7.3: (Feature) New option allows you to disable wallpaper changing when a full screen application is running. This way Pulse doesn't slow down/lag your videos and games :) (Fix) Some users were getting Wallbase errors when logging in. This has been fixed. (Feature) Right click a provider and you can now make a copy of it by selecting the "Dupl...MoreTerra (Terraria World Viewer): MoreTerra 1.11.1: Release 1.11.1 =========== =Bug Fixes= =========== Added more tile blocks (Clouds, crimstone) Added items (binoculars, rope, Pirahna Gun) Added ores (Lead, Tin) Chests now work, I broke them yesterday. =============== =Known Issues= =============== I am having trouble with new background walls. So you will see a red outline for crimson then a pink inside. Same with where I think the queen bee lives.VG-Ripper & PG-Ripper: PG-Ripper 1.4.19: NEW: Added Option to login as Guest NEW: Added Menu Option to delete an Forum Account NEW: Added Support for "ImageTeam.org links FIXED: Fixed Ripping of http://forum.babeunion.com ForumsSingle Line Diagram (Electrical) Control Library: Single Line Diagram (Electrical) Control Lib - 1.2: In this release of SLD (Electrical) Control Lib I have fix code for the following symbols... 1. Switch 2. Isolator 3. Lightening Arrestor 4. Meter A new symbol is added for "Pothead Terminal" You can give it a try. I will keep improving and posting the new features.State of Decay Save Manager: Version 1.0.4: Add version at bottom of formCollection Commander for Configuration Manager 2012: CMCollCtr_1.0.0.2: Windows Installer (MSI) setup;New Ribbon Toolbar implemented; more Powershell commands...Classic WiX Burn Theme: Classic WiX Burn Theme 1.0: Project Description A WiX Burn theme inspired by the classic WiX wizard user interface.QuickConverter: QuickConverter 0.7.3 Beta: Allows access to external variables from inside lambda expressions.DNN® Form and List: DNN Form and List 06.00.07: DotNetNuke Form and List 06.00.06 Changes to 6.0.7•Fixed an error in datatypes.config that caused calculated fields to be missing in 6.0.6 Changes to 6.0.6•Add in Sql to remove 'text on row' setting for UserDefinedTable to make SQL Azure compatible. •Add new azureCompatible element to manifest. •Added a fix for importing templates. Changes to 6.0.2•Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 •Change: Data is now stored in nvarchar(max) instead of ntext C...Trace Reader for Microsoft Dynamics CRM: Trace Reader (1.2013.10.3): Fix a bug when the first caracter of a description line is '[' Add search featureSimpleExcelReportMaker: Serm 0.03: SourceCode and Sample .Net Framework 3.5 AnyCPU compile.Application Architecture Guidelines: App Architecture Guidelines 3.0.8: This document is an overview of software qualities, principles, patterns, practices, tools and libraries.BlackJumboDog: Ver5.9.6: 2013.09.30 Ver5.9.6 (1)SMTP???????、???????????????? (2)WinAPI??????? (3)Web???????CGI???????????????????????New ProjectsASP.NET and ASP.NET MVC Blog Test: As a recent convert from Windows Forms & WPF to ASP.NET and ASP.NET MVC, I've created a simple project and implemented it twice using ASP.NET and ASP.NET MVC.cmdradio: Simple command-line interface internet radio playerDa Nang College Of Technology: Cao Ð?ng Công Ngh?DNN Camera Slideshow: The Camera Slideshow module for DNNFolder Iterator: Folder Iterator is a program I made one night to iterate through a folder and output an ordered list of files contained within the chosen directory.foobarpoc: fooJamendo Search Rest: This project uses the Jamendo REST API to search songs by title.Lab Nhibernate, PRISM, WPF, FLUENT, C#, ServiceStack, JSON: This is a lab for new technology and solving real developer problem Merch ASP.NET: This project is a port of Merch built on Zend framework 2 / PHP 5.MyTest2: This is test project2.Paintbear: Paintbear is a free open-source Paint Program and Image Manipulation Program for Windows based on the .NET Framework(version4). Works on Linux,too ! With Wine RasterConversion (.Net framework): Comparison of variants for working with raster (Bitmap class) at a low level. .Net framework, C#SSIS Custom Connection Manager: Example code for creating a Custom Connection Manager in SSIS 2008 and 2012Web Scripting Project: This is a project related to web application development at the Universtity of HertfordshireWebscripting1: New Scripting Website for University of Herts course Write.NET: Another .NET Blogging Engine: Write.NET is currently under development. Write.NET will be lightweight and highly configurable blogging engine built in MVC4Yoer: ????ASP.NET MVC??，????????????

  Read the article

• quick look at: dm_db_index_physical_stats

  - by fatherjack

  A quick look at the key data from this dmv that can help a DBA keep databases performing well and systems online as the users need them. When the dynamic management views relating to index statistics became available in SQL Server 2005 there was much hype about how they can help a DBA keep their servers running in better health than ever before. This particular view gives an insight into the physical health of the indexes present in a database. Whether they are use or unused, complete or missing some columns is irrelevant, this is simply the physical stats of all indexes; disabled indexes are ignored however. In it’s simplest form this dmv can be executed as:   The results from executing this contain a record for every index in every database but some of the columns will be NULL. The first parameter is there so that you can specify which database you want to gather index details on, rather than scan every database. Simply specifying DB_ID() in place of the first NULL achieves this. In order to avoid the NULLS, or more accurately, in order to choose when to have the NULLS you need to specify a value for the last parameter. It takes one of 4 values – DEFAULT, ‘SAMPLED’, ‘LIMITED’ or ‘DETAILED’. If you execute the dmv with each of these values you can see some interesting details in the times taken to complete each step. DECLARE @Start DATETIME DECLARE @First DATETIME DECLARE @Second DATETIME DECLARE @Third DATETIME DECLARE @Finish DATETIME SET @Start = GETDATE() SELECT * FROM [sys].[dm_db_index_physical_stats](DB_ID(), NULL, NULL, NULL, DEFAULT) AS ddips SET @First = GETDATE() SELECT * FROM [sys].[dm_db_index_physical_stats](DB_ID(), NULL, NULL, NULL, 'SAMPLED') AS ddips SET @Second = GETDATE() SELECT * FROM [sys].[dm_db_index_physical_stats](DB_ID(), NULL, NULL, NULL, 'LIMITED') AS ddips SET @Third = GETDATE() SELECT * FROM [sys].[dm_db_index_physical_stats](DB_ID(), NULL, NULL, NULL, 'DETAILED') AS ddips SET @Finish = GETDATE() SELECT DATEDIFF(ms, @Start, @First) AS [DEFAULT] , DATEDIFF(ms, @First, @Second) AS [SAMPLED] , DATEDIFF(ms, @Second, @Third) AS [LIMITED] , DATEDIFF(ms, @Third, @Finish) AS [DETAILED] Running this code will give you 4 result sets; DEFAULT will have 12 columns full of data and then NULLS in the remainder. SAMPLED will have 21 columns full of data. LIMITED will have 12 columns of data and the NULLS in the remainder. DETAILED will have 21 columns full of data. So, from this we can deduce that the DEFAULT value (the same one that is also applied when you query the view using a NULL parameter) is the same as using LIMITED. Viewing the final result set has some details that are worth noting: Running queries against this view takes significantly longer when using the SAMPLED and DETAILED values in the last parameter. The duration of the query is directly related to the size of the database you are working in so be careful running this on big databases unless you have tried it on a test server first. Let’s look at the data we get back with the DEFAULT value first of all and then progress to the extra information later. We know that the first parameter that we supply has to be a database id and for the purposes of this blog we will be providing that value with the DB_ID function. We could just as easily put a fixed value in there or a function such as DB_ID (‘AnyDatabaseName’). The first columns we get back are database_id and object_id. These are pretty explanatory and we can wrap those in some code to make things a little easier to read: SELECT DB_NAME([ddips].[database_id]) AS [DatabaseName] , OBJECT_NAME([ddips].[object_id]) AS [TableName] … FROM [sys].[dm_db_index_physical_stats](DB_ID(), NULL, NULL, NULL, NULL) AS ddips  gives us   SELECT DB_NAME([ddips].[database_id]) AS [DatabaseName] , OBJECT_NAME([ddips].[object_id]) AS [TableName], [i].[name] AS [IndexName] , ….. FROM [sys].[dm_db_index_physical_stats](DB_ID(), NULL, NULL, NULL, NULL) AS ddips INNER JOIN [sys].[indexes] AS i ON [ddips].[index_id] = [i].[index_id] AND [ddips].[object_id] = [i].[object_id]     These handily tie in with the next parameters in the query on the dmv. If you specify an object_id and an index_id in these then you get results limited to either the table or the specific index. Once again we can place a  function in here to make it easier to work with a specific table. eg. SELECT * FROM [sys].[dm_db_index_physical_stats] (DB_ID(), OBJECT_ID(‘AdventureWorks2008.Person.Address’) , 1, NULL, NULL) AS ddips   Note: Despite me showing that functions can be placed directly in the parameters for this dmv, best practice recommends that functions are not used directly in the function as it is possible that they will fail to return a valid object ID. To be certain of not passing invalid values to this function, and therefore setting an automated process off on the wrong path, declare variables for the OBJECT_IDs and once they have been validated, use them in the function: DECLARE @db_id SMALLINT; DECLARE @object_id INT; SET @db_id = DB_ID(N’AdventureWorks_2008′); SET @object_id = OBJECT_ID(N’AdventureWorks_2008.Person.Address’); IF @db_id IS NULL BEGINPRINT N’Invalid database’; ENDELSE IF @object_id IS NULL BEGINPRINT N’Invalid object’; ENDELSE BEGINSELECT * FROM sys.dm_db_index_physical_stats (@db_id, @object_id, NULL, NULL , ‘LIMITED’); END; GO In cases where the results of querying this dmv don’t have any effect on other processes (i.e. simply viewing the results in the SSMS results area)  then it will be noticed when the results are not consistent with the expected results and in the case of this blog this is the method I have used. So, now we can relate the values in these columns to something that we recognise in the database lets see what those other values in the dmv are all about. The next columns are: We’ll skip partition_number, index_type_desc, alloc_unit_type_desc, index_depth and index_level  as this is a quick look at the dmv and they are pretty self explanatory. The final columns revealed by querying this view in the DEFAULT mode are avg_fragmentation_in_percent. This is the amount that the index is logically fragmented. It will show NULL when the dmv is queried in SAMPLED mode. fragment_count. The number of pieces that the index is broken into. It will show NULL when the dmv is queried in SAMPLED mode. avg_fragment_size_in_pages. The average size, in pages, of a single fragment in the leaf level of the IN_ROW_DATA allocation unit. It will show NULL when the dmv is queried in SAMPLED mode. page_count. Total number of index or data pages in use. OK, so what does this give us? Well, there is an obvious correlation between fragment_count, page_count and avg_fragment_size-in_pages. We see that an index that takes up 27 pages and is in 3 fragments has an average fragment size of 9 pages (27/3=9). This means that for this index there are 3 separate places on the hard disk that SQL Server needs to locate and access to gather the data when it is requested by a DML query. If this index was bigger than 72KB then having it’s data in 3 pieces might not be too big an issue as each piece would have a significant piece of data to read and the speed of access would not be too poor. If the number of fragments increases then obviously the amount of data in each piece decreases and that means the amount of work for the disks to do in order to retrieve the data to satisfy the query increases and this would start to decrease performance. This information can be useful to keep in mind when considering the value in the avg_fragmentation_in_percent column. This is arrived at by an internal algorithm that gives a value to the logical fragmentation of the index taking into account the multiple files, type of allocation unit and the previously mentioned characteristics if index size (page_count) and fragment_count. Seeing an index with a high avg_fragmentation_in_percent value will be a call to action for a DBA that is investigating performance issues. It is possible that tables will have indexes that suffer from rapid increases in fragmentation as part of normal daily business and that regular defragmentation work will be needed to keep it in good order. In other cases indexes will rarely become fragmented and therefore not need rebuilding from one end of the year to another. Keeping this in mind DBAs need to use an ‘intelligent’ process that assesses key characteristics of an index and decides on the best, if any, defragmentation method to apply should be used. There is a simple example of this in the sample code found in the Books OnLine content for this dmv, in example D. There are also a couple of very popular solutions created by SQL Server MVPs Michelle Ufford and Ola Hallengren which I would wholly recommend that you review for much further detail on how to care for your SQL Server indexes. Right, let’s get back on track then. Querying the dmv with the fifth parameter value as ‘DETAILED’ takes longer because it goes through the index and refreshes all data from every level of the index. As this blog is only a quick look a we are going to skate right past ghost_record_count and version_ghost_record_count and discuss avg_page_space_used_in_percent, record_count, min_record_size_in_bytes, max_record_size_in_bytes and avg_record_size_in_bytes. We can see from the details below that there is a correlation between the columns marked. Column 1 (Page_Count) is the number of 8KB pages used by the index, column 2 is how full each page is (how much of the 8KB has actual data written on it), column 3 is how many records are recorded in the index and column 4 is the average size of each record. This approximates to: ((Col1*8) * 1024*(Col2/100))/Col3 = Col4*. avg_page_space_used_in_percent is an important column to review as this indicates how much of the disk that has been given over to the storage of the index actually has data on it. This value is affected by the value given for the FILL_FACTOR parameter when creating an index. avg_record_size_in_bytes is important as you can use it to get an idea of how many records are in each page and therefore in each fragment, thus reinforcing how important it is to keep fragmentation under control. min_record_size_in_bytes and max_record_size_in_bytes are exactly as their names set them out to be. A detail of the smallest and largest records in the index. Purely offered as a guide to the DBA to better understand the storage practices taking place. So, keeping an eye on avg_fragmentation_in_percent will ensure that your indexes are helping data access processes take place as efficiently as possible. Where fragmentation recurs frequently then potentially the DBA should consider; the fill_factor of the index in order to leave space at the leaf level so that new records can be inserted without causing fragmentation so rapidly. the columns used in the index should be analysed to avoid new records needing to be inserted in the middle of the index but rather always be added to the end. * – it’s approximate as there are many factors associated with things like the type of data and other database settings that affect this slightly.  Another great resource for working with SQL Server DMVs is Performance Tuning with SQL Server Dynamic Management Views by Louis Davidson and Tim Ford – a free ebook or paperback from Simple Talk. Disclaimer – Jonathan is a Friend of Red Gate and as such, whenever they are discussed, will have a generally positive disposition towards Red Gate tools. Other tools are often available and you should always try others before you come back and buy the Red Gate ones. All code in this blog is provided “as is” and no guarantee, warranty or accuracy is applicable or inferred, run the code on a test server and be sure to understand it before you run it on a server that means a lot to you or your manager.

  Read the article

• Convert ddply {plyr} to Oracle R Enterprise, or use with Embedded R Execution

  - by Mark Hornick

  The plyr package contains a set of tools for partitioning a problem into smaller sub-problems that can be more easily processed. One function within {plyr} is ddply, which allows you to specify subsets of a data.frame and then apply a function to each subset. The result is gathered into a single data.frame. Such a capability is very convenient. The function ddply also has a parallel option that if TRUE, will apply the function in parallel, using the backend provided by foreach. This type of functionality is available through Oracle R Enterprise using the ore.groupApply function. In this blog post, we show a few examples from Sean Anderson's "A quick introduction to plyr" to illustrate the correpsonding functionality using ore.groupApply. To get started, we'll create a demo data set and load the plyr package. set.seed(1) d <- data.frame(year = rep(2000:2014, each = 3),         count = round(runif(45, 0, 20))) dim(d) library(plyr) This first example takes the data frame, partitions it by year, and calculates the coefficient of variation of the count, returning a data frame. # Example 1 res <- ddply(d, "year", function(x) {   mean.count <- mean(x$count)   sd.count <- sd(x$count)   cv <- sd.count/mean.count   data.frame(cv.count = cv)   }) To illustrate the equivalent functionality in Oracle R Enterprise, using embedded R execution, we use the ore.groupApply function on the same data, but pushed to the database, creating an ore.frame. The function ore.push creates a temporary table in the database, returning a proxy object, the ore.frame. D <- ore.push(d) res <- ore.groupApply (D, D$year, function(x) {   mean.count <- mean(x$count)   sd.count <- sd(x$count)   cv <- sd.count/mean.count   data.frame(year=x$year[1], cv.count = cv)   }, FUN.VALUE=data.frame(year=1, cv.count=1)) You'll notice the similarities in the first three arguments. With ore.groupApply, we augment the function to return the specific data.frame we want. We also specify the argument FUN.VALUE, which describes the resulting data.frame. From our previous blog posts, you may recall that by default, ore.groupApply returns an ore.list containing the results of each function invocation. To get a data.frame, we specify the structure of the result. The results in both cases are the same, however the ore.groupApply result is an ore.frame. In this case the data stays in the database until it's actually required. This can result in significant memory and time savings whe data is large. R> class(res) [1] "ore.frame" attr(,"package") [1] "OREbase" R> head(res)    year cv.count 1 2000 0.3984848 2 2001 0.6062178 3 2002 0.2309401 4 2003 0.5773503 5 2004 0.3069680 6 2005 0.3431743 To make the ore.groupApply execute in parallel, you can specify the argument parallel with either TRUE, to use default database parallelism, or to a specific number, which serves as a hint to the database as to how many parallel R engines should be used. The next ddply example uses the summarise function, which creates a new data.frame. In ore.groupApply, the year column is passed in with the data. Since no automatic creation of columns takes place, we explicitly set the year column in the data.frame result to the value of the first row, since all rows received by the function have the same year. # Example 2 ddply(d, "year", summarise, mean.count = mean(count)) res <- ore.groupApply (D, D$year, function(x) {   mean.count <- mean(x$count)   data.frame(year=x$year[1], mean.count = mean.count)   }, FUN.VALUE=data.frame(year=1, mean.count=1)) R> head(res)    year mean.count 1 2000 7.666667 2 2001 13.333333 3 2002 15.000000 4 2003 3.000000 5 2004 12.333333 6 2005 14.666667 Example 3 uses the transform function with ddply, which modifies the existing data.frame. With ore.groupApply, we again construct the data.frame explicilty, which is returned as an ore.frame. # Example 3 ddply(d, "year", transform, total.count = sum(count)) res <- ore.groupApply (D, D$year, function(x) {   total.count <- sum(x$count)   data.frame(year=x$year[1], count=x$count, total.count = total.count)   }, FUN.VALUE=data.frame(year=1, count=1, total.count=1)) > head(res)    year count total.count 1 2000 5 23 2 2000 7 23 3 2000 11 23 4 2001 18 40 5 2001 4 40 6 2001 18 40 In Example 4, the mutate function with ddply enables you to define new columns that build on columns just defined. Since the construction of the data.frame using ore.groupApply is explicit, you always have complete control over when and how to use columns. # Example 4 ddply(d, "year", mutate, mu = mean(count), sigma = sd(count),       cv = sigma/mu) res <- ore.groupApply (D, D$year, function(x) {   mu <- mean(x$count)   sigma <- sd(x$count)   cv <- sigma/mu   data.frame(year=x$year[1], count=x$count, mu=mu, sigma=sigma, cv=cv)   }, FUN.VALUE=data.frame(year=1, count=1, mu=1,sigma=1,cv=1)) R> head(res)    year count mu sigma cv 1 2000 5 7.666667 3.055050 0.3984848 2 2000 7 7.666667 3.055050 0.3984848 3 2000 11 7.666667 3.055050 0.3984848 4 2001 18 13.333333 8.082904 0.6062178 5 2001 4 13.333333 8.082904 0.6062178 6 2001 18 13.333333 8.082904 0.6062178 In Example 5, ddply is used to partition data on multiple columns before constructing the result. Realizing this with ore.groupApply involves creating an index column out of the concatenation of the columns used for partitioning. This example also allows us to illustrate using the ORE transparency layer to subset the data. # Example 5 baseball.dat <- subset(baseball, year > 2000) # data from the plyr package x <- ddply(baseball.dat, c("year", "team"), summarize,            homeruns = sum(hr)) We first push the data set to the database to get an ore.frame. We then add the composite column and perform the subset, using the transparency layer. Since the results from database execution are unordered, we will explicitly sort these results and view the first 6 rows. BB.DAT <- ore.push(baseball) BB.DAT$index <- with(BB.DAT, paste(year, team, sep="+")) BB.DAT2 <- subset(BB.DAT, year > 2000) X <- ore.groupApply (BB.DAT2, BB.DAT2$index, function(x) {   data.frame(year=x$year[1], team=x$team[1], homeruns=sum(x$hr))   }, FUN.VALUE=data.frame(year=1, team="A", homeruns=1), parallel=FALSE) res <- ore.sort(X, by=c("year","team")) R> head(res)    year team homeruns 1 2001 ANA 4 2 2001 ARI 155 3 2001 ATL 63 4 2001 BAL 58 5 2001 BOS 77 6 2001 CHA 63 Our next example is derived from the ggplot function documentation. This illustrates the use of ddply within using the ggplot2 package. We first create a data.frame with demo data and use ddply to create some statistics for each group (gp). We then use ggplot to produce the graph. We can take this same code, push the data.frame df to the database and invoke this on the database server. The graph will be returned to the client window, as depicted below. # Example 6 with ggplot2 library(ggplot2) df <- data.frame(gp = factor(rep(letters[1:3], each = 10)),                  y = rnorm(30)) # Compute sample mean and standard deviation in each group library(plyr) ds <- ddply(df, .(gp), summarise, mean = mean(y), sd = sd(y)) # Set up a skeleton ggplot object and add layers: ggplot() +   geom_point(data = df, aes(x = gp, y = y)) +   geom_point(data = ds, aes(x = gp, y = mean),              colour = 'red', size = 3) +   geom_errorbar(data = ds, aes(x = gp, y = mean,                                ymin = mean - sd, ymax = mean + sd),              colour = 'red', width = 0.4) DF <- ore.push(df) ore.tableApply(DF, function(df) {   library(ggplot2)   library(plyr)   ds <- ddply(df, .(gp), summarise, mean = mean(y), sd = sd(y))   ggplot() +     geom_point(data = df, aes(x = gp, y = y)) +     geom_point(data = ds, aes(x = gp, y = mean),                colour = 'red', size = 3) +     geom_errorbar(data = ds, aes(x = gp, y = mean,                                  ymin = mean - sd, ymax = mean + sd),                   colour = 'red', width = 0.4) }) But let's take this one step further. Suppose we wanted to produce multiple graphs, partitioned on some index column. We replicate the data three times and add some noise to the y values, just to make the graphs a little different. We also create an index column to form our three partitions. Note that we've also specified that this should be executed in parallel, allowing Oracle Database to control and manage the server-side R engines. The result of ore.groupApply is an ore.list that contains the three graphs. Each graph can be viewed by printing the list element. df2 <- rbind(df,df,df) df2$y <- df2$y + rnorm(nrow(df2)) df2$index <- c(rep(1,300), rep(2,300), rep(3,300)) DF2 <- ore.push(df2) res <- ore.groupApply(DF2, DF2$index, function(df) {   df <- df[,1:2]   library(ggplot2)   library(plyr)   ds <- ddply(df, .(gp), summarise, mean = mean(y), sd = sd(y))   ggplot() +     geom_point(data = df, aes(x = gp, y = y)) +     geom_point(data = ds, aes(x = gp, y = mean),                colour = 'red', size = 3) +     geom_errorbar(data = ds, aes(x = gp, y = mean,                                  ymin = mean - sd, ymax = mean + sd),                   colour = 'red', width = 0.4)   }, parallel=TRUE) res[[1]] res[[2]] res[[3]] To recap, we've illustrated how various uses of ddply from the plyr package can be realized in ore.groupApply, which affords the user explicit control over the contents of the data.frame result in a straightforward manner. We've also highlighted how ddply can be used within an ore.groupApply call.

  Read the article

• CodePlex Daily Summary for Saturday, June 02, 2012

  CodePlex Daily Summary for Saturday, June 02, 2012Popular ReleasesZXMAK2: Version 2.6.2.3: - add support for ZIP files created on UNIX system; - improve WAV support (fixed PCM24, FLOAT32; added PCM32, FLOAT64); - fix drag-n-drop on modal dialogs; - tape AutoPlay feature (thanks to Woody for algorithm)Librame Utility: Librame Utility 3.5.1: 2012-06-01 ???? ?、????（System.Web.Caching ???） 1、??????（? Librame.Settings ??）； 2、?? SQL ????； 3、??????； 4、??????； ?、???? 1、????：??MD5、SHA1、SHA256、SHA384、SHA512?； 2、???????：??BASE64、DES、??DES、AES?； ?：???? GUID （???????）??KEY，?????????????。 ?、????? 1、?????、??、?????????； 2、??????????； ?：??????????????（Enum.config）。 ?、???? 1、??????、??、??、??、????????； 2、?????????????????； ?、?????? 1、????? XML ? JSON ?????????（??? XML ??）； ?、????? 1、??????????（??? MediaInfo.dll（32?）??）； 2、????????（??? ffmpeg...TestProject_Git: asa: asdf.Net Code Samples: Full WCF Duplex Service Example: Full WCF Duplex Service ExampleVivoSocial: VivoSocial 2012.06.01: Version 2012.06.01 of VivoSocial has been released. If you experienced any issues with the previous version, please update your modules to the 2012.06.01 release and see if they persist. You can download the new releases from social.codeplex.com or our downloads page. If you have any questions about this release, please post them in our Support forums. If you are experiencing a bug or would like to request a new feature, please submit it to our issue tracker. This release has been tested on ...Kendo UI ASP.NET Sample Applications: Sample Applications (2012-06-01): Sample application(s) demonstrating the use of Kendo UI in ASP.NET applications.Better Explorer: Better Explorer Beta 1: Finally, the first Beta is here! There were a lot of changes, including: Translations into 10 different languages (the translations are not complete and will be updated soon) Conditional Select new tools for managing archives Folder Tools tab new search bar and Search Tab new image editing tools update function many bug fixes, stability fixes, and memory leak fixes other new features as well! Please check it out and if there are any problems, let us know. :) Also, do not forge...myManga: myManga v1.0.0.3: Will include MangaPanda as a default option. ChangeLog Updating from Previous Version: Extract contents of Release - myManga v1.0.0.3.zip to previous version's folder. Replaces: myManga.exe BakaBox.dll CoreMangaClasses.dll Manga.dll Plugins/MangaReader.manga.dll Plugins/MangaFox.manga.dll Plugins/MangaHere.manga.dll Plugins/MangaPanda.manga.dllPlayer Framework by Microsoft: Player Framework for Windows 8 Metro (Preview 3): Player Framework for HTML/JavaScript and XAML/C# Metro Style Applications. Additional DownloadsIIS Smooth Streaming Client SDK for Windows 8 Microsoft PlayReady Client SDK for Metro Style Apps Release notes:Support for Windows 8 Release Preview (released 5/31/12) Advertising support (VAST, MAST, VPAID, & clips) Miscellaneous improvements and bug fixesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.54: Fix for issue #18161: pretty-printing CSS @media rule throws an exception due to mismatched Indent/Unindent pair.Silverlight Toolkit: Silverlight 5 Toolkit Source - May 2012: Source code for December 2011 Silverlight 5 Toolkit release.Json.NET: Json.NET 4.5 Release 6: New feature - Added IgnoreDataMemberAttribute support New feature - Added GetResolvedPropertyName to DefaultContractResolver New feature - Added CheckAdditionalContent to JsonSerializer Change - Metro build now always uses late bound reflection Change - JsonTextReader no longer returns no content after consecutive underlying content read failures Fix - Fixed bad JSON in an array with error handling creating an infinite loop Fix - Fixed deserializing objects with a non-default cons...DotNetNuke® Community Edition CMS: 06.02.00: Major Highlights Fixed issue in the Site Settings when single quotes were being treated as escape characters Fixed issue loading the Mobile Premium Data after upgrading from CE to PE Fixed errors logged when updating folder provider settings Fixed the order of the mobile device capabilities in the Site Redirection Management UI The User Profile page was completely rebuilt. We needed User Profiles to have multiple child pages. This would allow for the most flexibility by still f...????: ????2.0.1: 1、?????。WiX Toolset: WiX v3.6 RC: WiX v3.6 RC (3.6.2928.0) provides feature complete Burn with VS11 support. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/5/28/WiX-v3.6-Release-Candidate-availableJavascript .NET: Javascript .NET v0.7: SetParameter() reverts to its old behaviour of allowing JavaScript code to add new properties to wrapped C# objects. The behavior added briefly in 0.6 (throws an exception) can be had via the new SetParameterOptions.RejectUnknownProperties. TerminateExecution now uses its isolate to terminate the correct context automatically. Added support for converting all C# integral types, decimal and enums to JavaScript numbers. (Previously only the common types were handled properly.) Bug fixe...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (May 2012): Fixes: unserialize() of negative float numbers fix pcre possesive quantifiers and character class containing ()[] array deserilization when the array contains a reference to ISerializable parsing lambda function fix round() reimplemented as it is in PHP to avoid .NET rounding errors filesize bypass for FileInfo.Length bug in Mono New features: Time zones reimplemented, uses Windows/Linux databaseSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.1): New fetures:Admin enable / disable match Hide/Show Euro 2012 SharePoint lists (3 lists) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...????SDK for .Net 4.0+(OAuth2.0+??V2?API): ??V2?SDK???: ?????????API?? ???????OAuth2.0?? ????：????????????，??????????“SOURCE CODE”?????????Changeset，http://weibosdk.codeplex.com/SourceControl/list/changesets ???：????????，DEMO??AppKey????????????????，?????AppKey，????AppKey???????????，?????“????>????>????>??????”LINQ_Koans: LinqKoans v.02: Cleaned up a bitNew ProjectsAppleScript Slim: A super slimmed down library allowing you to execute AppleScript from your mono project (from your non MonoMac project).Ateneo Libri: Progetto web per la compravendita di libri universitariAzurehostedservicedashboard: Azure Hosted Service Dashboardcampus: Proyecto de pueba de MVC3 y codeplexDot Net Code Comment Analyzer: This Visual studio 2010 plugin, can count the comments in the C# code in the currently open solution in VS IDE. It shows a summary of the comments across all c# files in the project. this is useful when we want to enforce code comments , Code comments help in maintaining the code base , understanding code faster than going through the lines of code, makes code less dependant on a developer Individual.firstteamproject: H?c tfsFITClub: FITClub is platform fighting arcade game for 2 to 4 players. Enemies are controlled by AI. The goal is to force enemies down into the water or lava and keep safe from their attacks. You collect items to temporarily change your abilities. Multiplayer between more phones is coming soon.Jumpstart Branding for Sharepoint 2010: Basic Master Pages for SharePoint 2010 including a general, minified, heavily commented version of v4.master, a centered, fixed width, minified, commented Master Page and two Visual Studio 2010 solutions, one for farms and a second for sandboxes, to help you create a feature for deploying your Master Pages and other branding assets. Jumptart Branding for SP 2010 has been designed to help you quickly and easily jumpstart your next SharePoint 2010 Branding project.KelControl: Programme exe de controle d'activites. 1 - controle de la reponses de site web - http webrequest d'une Url - analyse du retour ( enetete http) - si ok ( Appel ws similaire a etat mais independant a faire apres niveau 4) - si erreur ( appel ws incrementer l'erreur) (par exemple au bout de 3 erreur declanchement alerte) dans un 1er temp on ne s'occupe pas du ws on inscrit les actions dans un fichier txt par exemple. process complet: - timer 15 minutes (param...KHTest: Visual Studio ??Librame Utility: Librame Utility 3.5.1Linux: this is the Linux project.Magic Morse: ?????????Maps: this is the Maps project.Mark Tarefas: Controlador de Tarefas para Mark AssessoriaMaxxFolderSize: MaxxUtils.FolderSizeMCTSTestCode: Project to hold code tried during learning MCTS CertificationMOBZHash: MOBZHash shows MD5 or SHA hash values for files, and reports files with identical hashes (which are most likely duplicates).NandleNF: Nandle NFNginx: this is the Nginx project. Oficina_SIGA: Siga, é um sistema de gerenciamento de oficinas.Plug-in: this is the Plug-in project.SharePoint Comments Anywhere: This is a very simple project which provides a commenting web part and a list template with the instance to store user's comments. SharePoint OTB only provides commenting capability on the Blog sites where users add their posts and anyone can view the page and add comments. Comments Anywhere can be configured on any list, pages library or any page of the SharePoint site with a web part zone enabling users to add their comments virtually anywhere you as an admin or a power user of your s...SharePoint Site Owners Webpart: SharePoint web part to display SharePoint site owners.Tarea AACQ: Proyecto para tarea FACCI 4A 01/06/12testprjct: test summaryTirailleur: Tirailleur code can be used to model an expanding wildfire (forest fire) perimeter. The code is implemented in VB.NET, and should be easy to translate to other languages. There are just a couple of classes handling the important work. These can be extracted and imported to another program. The code here includes some dummy client objects to represent the containing program. webdama: italian checkers game c#Webowo: wbowo projekt test obslugi tortoise i coldplex

  Read the article

• Table Variables: an empirical approach.

  - by Phil Factor

  It isn’t entirely a pleasant experience to publish an article only to have it described on Twitter as ‘Horrible’, and to have it criticized on the MVP forum. When this happened to me in the aftermath of publishing my article on Temporary tables recently, I was taken aback, because these critics were experts whose views I respect. What was my crime? It was, I think, to suggest that, despite the obvious quirks, it was best to use Table Variables as a first choice, and to use local Temporary Tables if you hit problems due to these quirks, or if you were doing complex joins using a large number of rows. What are these quirks? Well, table variables have advantages if they are used sensibly, but this requires some awareness by the developer about the potential hazards and how to avoid them. You can be hit by a badly-performing join involving a table variable. Table Variables are a compromise, and this compromise doesn’t always work out well. Explicit indexes aren’t allowed on Table Variables, so one cannot use covering indexes or non-unique indexes. The query optimizer has to make assumptions about the data rather than using column distribution statistics when a table variable is involved in a join, because there aren’t any column-based distribution statistics on a table variable. It assumes a reasonably even distribution of data, and is likely to have little idea of the number of rows in the table variables that are involved in queries. However complex the heuristics that are used might be in determining the best way of executing a SQL query, and they most certainly are, the Query Optimizer is likely to fail occasionally with table variables, under certain circumstances, and produce a Query Execution Plan that is frightful. The experienced developer or DBA will be on the lookout for this sort of problem. In this blog, I’ll be expanding on some of the tests I used when writing my article to illustrate the quirks, and include a subsequent example supplied by Kevin Boles. A simplified example. We’ll start out by illustrating a simple example that shows some of these characteristics. We’ll create two tables filled with random numbers and then see how many matches we get between the two tables. We’ll forget indexes altogether for this example, and use heaps. We’ll try the same Join with two table variables, two table variables with OPTION (RECOMPILE) in the JOIN clause, and with two temporary tables. It is all a bit jerky because of the granularity of the timing that isn’t actually happening at the millisecond level (I used DATETIME). However, you’ll see that the table variable is outperforming the local temporary table up to 10,000 rows. Actually, even without a use of the OPTION (RECOMPILE) hint, it is doing well. What happens when your table size increases? The table variable is, from around 30,000 rows, locked into a very bad execution plan unless you use OPTION (RECOMPILE) to provide the Query Analyser with a decent estimation of the size of the table. However, if it has the OPTION (RECOMPILE), then it is smokin’. Well, up to 120,000 rows, at least. It is performing better than a Temporary table, and in a good linear fashion. What about mixed table joins, where you are joining a temporary table to a table variable? You’d probably expect that the query analyzer would throw up its hands and produce a bad execution plan as if it were a table variable. After all, it knows nothing about the statistics in one of the tables so how could it do any better? Well, it behaves as if it were doing a recompile. And an explicit recompile adds no value at all. (we just go up to 45000 rows since we know the bigger picture now)   Now, if you were new to this, you might be tempted to start drawing conclusions. Beware! We’re dealing with a very complex beast: the Query Optimizer. It can come up with surprises What if we change the query very slightly to insert the results into a Table Variable? We change nothing else and just measure the execution time of the statement as before. Suddenly, the table variable isn’t looking so much better, even taking into account the time involved in doing the table insert. OK, if you haven’t used OPTION (RECOMPILE) then you’re toast. Otherwise, there isn’t much in it between the Table variable and the temporary table. The table variable is faster up to 8000 rows and then not much in it up to 100,000 rows. Past the 8000 row mark, we’ve lost the advantage of the table variable’s speed. Any general rule you may be formulating has just gone for a walk. What we can conclude from this experiment is that if you join two table variables, and can’t use constraints, you’re going to need that Option (RECOMPILE) hint. Count Dracula and the Horror Join. These tables of integers provide a rather unreal example, so let’s try a rather different example, and get stuck into some implicit indexing, by using constraints. What unusual words are contained in the book ‘Dracula’ by Bram Stoker? Here we get a table of all the common words in the English language (60,387 of them) and put them in a table. We put them in a Table Variable with the word as a primary key, a Table Variable Heap and a Table Variable with a primary key. We then take all the distinct words used in the book ‘Dracula’ (7,558 of them). We then create a table variable and insert into it all those uncommon words that are in ‘Dracula’. i.e. all the words in Dracula that aren’t matched in the list of common words. To do this we use a left outer join, where the right-hand value is null. The results show a huge variation, between the sublime and the gorblimey. If both tables contain a Primary Key on the columns we join on, and both are Table Variables, it took 33 Ms. If one table contains a Primary Key, and the other is a heap, and both are Table Variables, it took 46 Ms. If both Table Variables use a unique constraint, then the query takes 36 Ms. If neither table contains a Primary Key and both are Table Variables, it took 116383 Ms. Yes, nearly two minutes!! If both tables contain a Primary Key, one is a Table Variables and the other is a temporary table, it took 113 Ms. If one table contains a Primary Key, and both are Temporary Tables, it took 56 Ms.If both tables are temporary tables and both have primary keys, it took 46 Ms. Here we see table variables which are joined on their primary key again enjoying a  slight performance advantage over temporary tables. Where both tables are table variables and both are heaps, the query suddenly takes nearly two minutes! So what if you have two heaps and you use option Recompile? If you take the rogue query and add the hint, then suddenly, the query drops its time down to 76 Ms. If you add unique indexes, then you've done even better, down to half that time. Here are the text execution plans.So where have we got to? Without drilling down into the minutiae of the execution plans we can begin to create a hypothesis. If you are using table variables, and your tables are relatively small, they are faster than temporary tables, but as the number of rows increases you need to do one of two things: either you need to have a primary key on the column you are using to join on, or else you need to use option (RECOMPILE) If you try to execute a query that is a join, and both tables are table variable heaps, you are asking for trouble, well- slow queries, unless you give the table hint once the number of rows has risen past a point (30,000 in our first example, but this varies considerably according to context). Kevin’s Skew In describing the table-size, I used the term ‘relatively small’. Kevin Boles produced an interesting case where a single-row table variable produces a very poor execution plan when joined to a very, very skewed table. In the original, pasted into my article as a comment, a column consisted of 100000 rows in which the key column was one number (1) . To this was added eight rows with sequential numbers up to 9. When this was joined to a single-tow Table Variable with a key of 2 it produced a bad plan. This problem is unlikely to occur in real usage, and the Query Optimiser team probably never set up a test for it. Actually, the skew can be slightly less extreme than Kevin made it. The following test showed that once the table had 54 sequential rows in the table, then it adopted exactly the same execution plan as for the temporary table and then all was well. Undeniably, real data does occasionally cause problems to the performance of joins in Table Variables due to the extreme skew of the distribution. We've all experienced Perfectly Poisonous Table Variables in real live data. As in Kevin’s example, indexes merely make matters worse, and the OPTION (RECOMPILE) trick does nothing to help. In this case, there is no option but to use a temporary table. However, one has to note that once the slight de-skew had taken place, then the plans were identical across a huge range. Conclusions Where you need to hold intermediate results as part of a process, Table Variables offer a good alternative to temporary tables when used wisely. They can perform faster than a temporary table when the number of rows is not great. For some processing with huge tables, they can perform well when only a clustered index is required, and when the nature of the processing makes an index seek very effective. Table Variables are scoped to the batch or procedure and are unlikely to hang about in the TempDB when they are no longer required. They require no explicit cleanup. Where the number of rows in the table is moderate, you can even use them in joins as ‘Heaps’, unindexed. Beware, however, since, as the number of rows increase, joins on Table Variable heaps can easily become saddled by very poor execution plans, and this must be cured either by adding constraints (UNIQUE or PRIMARY KEY) or by adding the OPTION (RECOMPILE) hint if this is impossible. Occasionally, the way that the data is distributed prevents the efficient use of Table Variables, and this will require using a temporary table instead. Tables Variables require some awareness by the developer about the potential hazards and how to avoid them. If you are not prepared to do any performance monitoring of your code or fine-tuning, and just want to pummel out stuff that ‘just runs’ without considering namby-pamby stuff such as indexes, then stick to Temporary tables. If you are likely to slosh about large numbers of rows in temporary tables without considering the niceties of processing just what is required and no more, then temporary tables provide a safer and less fragile means-to-an-end for you.

  Read the article

• Row Number Transformation

  The Row Number Transformation calculates a row number for each row, and adds this as a new output column to the data flow. The column number is a sequential number, based on a seed value. Each row receives the next number in the sequence, based on the defined increment value. The final row number can be stored in a variable for later analysis, and can be used as part of a process to validate the integrity of the data movement. The Row Number transform has a variety of uses, such as generating surrogate keys, or as the basis for a data partitioning scheme when combined with the Conditional Split transformation. Properties Property Data Type Description Seed Int32 The first row number or seed value. Increment Int32 The value added to the previous row number to make the next row number. OutputVariable String The name of the variable into which the final row number is written post execution. (Optional). The three properties have been configured to support expressions, or they can set directly in the normal manner. Expressions on components are only visible on the hosting Data Flow task, not at the individual component level. Sometimes the data type of the property is incorrectly set when the properties are created, see the Troubleshooting section below for details on how to fix this. Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. For 2005/2008 Only - Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Row Number transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations, and this component requires a minimum of SQL Server 2005 Service Pack 1. Downloads The Row Number Transformation  is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Row Number Transformation for SQL Server 2005 Row Number Transformation for SQL Server 2008 Row Number Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.6 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.5 - SQL Server 2008 release. (15 Oct 2008) SQL Server 2005 Version 1.2.0.34 – Updated installer. (25 Jun 2008) Version 1.2.0.7 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. Added the ability to reuse an existing column to hold the generated row number, as an alternative to the default of adding a new column to the output. (18 Jun 2006) Version 1.2.0.7 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. Added the ability to reuse an existing column to hold the generated row number, as an alternative to the default of adding a new column to the output. (18 Jun 2006) Version 1.0.0.0 - Public Release for SQL Server 2005 IDW 15 June CTP (29 Aug 2005) Screenshot Code Sample The following code sample demonstrates using the Data Generator Source and Row Number Transformation programmatically in a very simple package. Package package = new Package(); package.Name = "Data Generator & Row Number"; // Add the Data Flow Task Executable taskExecutable = package.Executables.Add("STOCK:PipelineTask"); // Get the task host wrapper, and the Data Flow task TaskHost taskHost = taskExecutable as TaskHost; MainPipe dataFlowTask = (MainPipe)taskHost.InnerObject; // Add Data Generator Source IDTSComponentMetaData100 componentSource = dataFlowTask.ComponentMetaDataCollection.New(); componentSource.Name = "Data Generator"; componentSource.ComponentClassID = "Konesans.Dts.Pipeline.DataGenerator.DataGenerator, Konesans.Dts.Pipeline.DataGenerator, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b2ab4a111192992b"; CManagedComponentWrapper instanceSource = componentSource.Instantiate(); instanceSource.ProvideComponentProperties(); instanceSource.SetComponentProperty("RowCount", 10000); // Add Row Number Tx IDTSComponentMetaData100 componentRowNumber = dataFlowTask.ComponentMetaDataCollection.New(); componentRowNumber.Name = "FlatFileDestination"; componentRowNumber.ComponentClassID = "Konesans.Dts.Pipeline.RowNumberTransform.RowNumberTransform, Konesans.Dts.Pipeline.RowNumberTransform, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b2ab4a111192992b"; CManagedComponentWrapper instanceRowNumber = componentRowNumber.Instantiate(); instanceRowNumber.ProvideComponentProperties(); instanceRowNumber.SetComponentProperty("Increment", 10); // Connect the two components together IDTSPath100 path = dataFlowTask.PathCollection.New(); path.AttachPathAndPropagateNotifications(componentSource.OutputCollection[0], componentRowNumber.InputCollection[0]); #if DEBUG // Save package to disk, DEBUG only new Application().SaveToXml(String.Format(@"C:\Temp\{0}.dtsx", package.Name), package, null); #endif package.Execute(); foreach (DtsError error in package.Errors) { Console.WriteLine("ErrorCode : {0}", error.ErrorCode); Console.WriteLine(" SubComponent : {0}", error.SubComponent); Console.WriteLine(" Description : {0}", error.Description); } package.Dispose(); Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005, SQL Server 2008 and SQL Server 2012. If you get an error when you try and use the component along the lines of The component could not be added to the Data Flow task. Please verify that this component is properly installed.  ... The data flow object "Konesans ..." is not installed correctly on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component? Please also make sure you have installed a minimum of SP1 for SQL 2005. The IDtsPipelineEnvironmentService was added in SQL Server 2005 Service Pack 1 (SP1) (See  http://support.microsoft.com/kb/916940). If you get an error Could not load type 'Microsoft.SqlServer.Dts.Design.IDtsPipelineEnvironmentService' from assembly 'Microsoft.SqlServer.Dts.Design, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'. when trying to open the user interface, it implies that your development machine has not had SP1 applied. Very occasionally we get a problem to do with the properties not being created with the correct data type. Since there is no way to programmatically to define the data type of a pipeline component property, it can only infer it. Whilst we set an integer value as we create the property, sometimes SSIS decides to define it is a decimal. This is often highlighted when you use a property expression against the property and get an error similar to Cannot convert System.Int32 to System.Decimal. Unfortunately this is beyond our control and there appears to be no pattern as to when this happens. If you do have more information we would be happy to hear it. To fix this issue you can manually edit the package file. In Visual Studio right click the package file from the Solution Explorer and select View Code, which will open the package as raw XML. You can now search for the properties by name or the component name. You can then change the incorrect property data types highlighted below from Decimal to Int32. <component id="37" name="Row Number Transformation" componentClassID="{BF01D463-7089-41EE-8F05-0A6DC17CE633}" … >     <properties>         <property id="38" name="UserComponentTypeName" …>         <property id="41" name="Seed" dataType="System.Int32" ...>10</property>         <property id="42" name="Increment" dataType="System.Decimal" ...>10</property>         ... If you are still having issues then contact us, but please provide as much detail as possible about error, as well as which version of the the task you are using and details of the SSIS tools installed.

  Read the article

• CodePlex Daily Summary for Monday, May 19, 2014

  CodePlex Daily Summary for Monday, May 19, 2014Popular ReleasesLINQ to Twitter: LINQ to Twitter v3.0.3: Supports .NET 4.5x, Windows Phone 8.x, Windows 8.x, Windows Azure, Xamarin.Android, and Xamarin.iOS. New features include Status/Lookup, Mute APIs, and bug fixes. 100% Twitter API v1.1 coverage, Async, Portable Class Library (PCL).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.26.0: Added access to the Release Notes during 'Check for Updates...'' Debug panels Added support for generic types members Members are grouped into 'Raw View' and 'Non-Public members' categories Implemented dedicated (array-like) view for Lists and Dictionaries http://download-codeplex.sec.s-msft.com/Download?ProjectName=csscriptnpp&DownloadId=846498ClosedXML - The easy way to OpenXML: ClosedXML 0.70.0: A lot of fixes. See history.SFDL.NET: SFDL.NET (2.2.9.2): Changelog: Neues Icon Xup.in CnL Plugin BugfixSEToolbox: SEToolbox 01.030.008 Release 1: Fixed cube editor failing to apply color to cubes. Added to cube editor, replace cube dialog, and Build Percent dialog. Corrected for hidden asteroid ore, allowing rare ore to show when importing an asteroid, or converting a 3d model to an asteroid (still appears to be limitations on rare ore in small asteroids). Allowed ore selection to Asteroid file import. (Can copy/import and convert existing asteroid to another ore). Added progress bars to common long running operations. Fixed ...Better Robocopy GUI: Command Line GUI for Robocopy: Better Robocopy GUI had become the primary plugin in Command Line GUI built on .NET 4Mini SQL Query: Mini SQL Query (1.0.71.456): Minor fixes and template corrections.HMS_TEST: ??1: ?? ???????TFS Planning and Disaster Recovery Avoidance Guide: v1.4.BETA - TFS, DR and Azure IaaS Planning Guides: Welcome to the TFS Planning and DR Avoidance Guidance What is new? A new crisper, more compact style, which is easier to consume on multiple devices without sacrificing any content. Also included are the new TFS on Azure IaaS guide and supplementary guides. Note Capacity planning workbook and posters are included in the Everything Zip package. Quality-Bar Detail Documentation has been reviewed by Visual Studio ALM Rangers Documentation has been through an independent technical review ...CRM Web API Lead Capture Example: CRM Web API Lead Capture Example: Sample Visual Studio 2013 project that provides an example of how you could use Web API and Microsoft Azure (could be deployed anywhere) to capture simple HTML form data into Dynamics CRM without directly having to integrate a .NET component.MB Tools: MDT Monitor Tool v1.4: This tool is used to connect to an MDT 2013 Monitor Webservice. The purpose is to provide an alternative to the MDT Deployment Workbench. Update: New in v1.4: Fixed bug where Dart Remote Viewer didnt work Option to show client local time instead of UTC, edit config.xml to enable/disable New in v1.2: Fixed Dart Remote Viewer not connection to full ip Issue: 1222 New in v1.1: Added timers for autorefresh of webservice info Added some better errorchecking and cleaned up the code a bit ...Bob The Simple Text Game: Bob The Simple Text Game: Bob The Simple Text GameWinAudit: WinAudit Freeware v3.0: WinAudit.exe v3.0 MD5: 88750CCF49FF7418199B2645755830FA Known Issues: 1. Report creation can be very slow when right-to-left (Hebrew) characters are present. 2. Emsisoft Anti-Malware may stop and/or quarantine WinAudit. This happens when WinAudit attempts to obtain a list if running programmes. You will need to set an exception rule in Emsisoft to allow WinAudit to run.crashme: crashme source tarball 2.7: Updated for 64-bit Linux environments with a system call to change the default no-execute-data protection. This tarball is equivalent to committed source revision 108727LUA for Windows CE: LUA 5.2.3 for Windows CE 5.0 (ARMV4I): LUA for Windows CE This is a preliminary porting of the latest LUA release (5.2.3) to the Windows CE platform. Command-line compiler, interpreter, dynamic-link-library, and import-library (both static and dynamic stubs) are provided as a binary release. In this release, the Windows CE compatibility CRT static library has been added, in order to embed statically the LUA interpreter. Moreover, the include files are present in the distribution archive, too.Jquery Dirty Flag: Beta Version 1.0: Simple Way to Manage Dirty Flag @ Client SideProView: ProView-2: Added a new short-cut key: Ctrl+D copies the value from the above cell to the current cell. The key combination Shift+NumPadMinus makes an underscore character Fixed a bug during renaming that displayed the message "The file is in use by another process" The spread sheet can now be customized with a highlighting row color for the currently displayed image.TerraMap (Terraria World Map Viewer): TerraMap 1.0.4: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed installer not uninstalling older versions The setup file will make sure .NET 4 is installed, install TerraMap, create desktop and start menu shortcuts, add a .wld file association, and launch TerraMap. If you prefer the zip ...WPF Localization Extension: v2.2.1: Issue #9277 Issue #9292 Issue #9311 Issue #9312 Issue #9313 Issue #9314CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.1.41167 Release: This release of the CtrlAltStudio Viewer includes the following significant features: Oculus Rift support. Stereoscopic 3D display support. Variable walking / flying speed. Xbox 360 Controller support. Kinect for Windows support. Based on Firestorm viewer 4.6.5 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-1-41167-release Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http:/...New Projects.NET Development Library: .NET Development LibraryBizTalk Flow Visualizer: This tool has been designed to help BizTalk developers and administrators visualize the flow of messages through their implementation of BizTalk Server.BlackSwan: Provides tools for value investingCamel Case Parser: Simple method with unit tests for splitting an up or down camel cased word into the words that comprise it.eukota_sandbox: really just a repository for practicing with some students i mentor.Hyperlapse: Software repository for Hyperlapse, a Universal Store App for Windows 8.1 and Windows Phone 8.1, National Level entry in code.fun.do hackathon by Microsoft.Informiamoci Partecipando: Progetto presentato al #code4italyKipLink: MVC5 Web Api 2 EF DB First Oracle 11g Custom MembershipMatAcademyPlayground: MatAcademy 2014 playgroundOgCRM: Proyecto OgCRMPowerSYDI: This is an re-engineering of SYDI vbscript created by Patrick Ogenstad in PowerShell. SharpLightReporting: SharpLightReporting is a reporting system for .Net developers, based on open source SpreadsheetLight excel/spreadsheet automation system. T4 Template to pre-generate views for Entity Framework 5.0, .NET 4.5: T4 Template to pre-generate views for Entity Framework 6.0, .NET 4.5Task Board: Simple TaskboardWentex OS: Wentex das kostenfrei Betriebssystem für alleWinldTunnel - VIPBrowserProject: NoneWintcy: Wintcy's only function is to disable taskbar transparency that Microsoft for some reason has left in Windows 8.????????-????????【??】????????????: ????????????????????????,??????????,????,????,?????????、??????,??????。 ??????-??????【??】??????????: ???????????,?????????????? ??。????????、????、????、?????????? ???????。 ??????-??????【??】??????????: ???????????????????????:????、????、??????????????,????????。????????! ??????-【??】??????????: ???????????????????,????,????,????,???????,?????,?????.??????。 ??????-??????【??】??????????: ????????????????????????????:???????,??????,????,????,????,?????！ ??????-??????【??】??????????: ????????????,??,??,??,??? ?,??,,??,??,??,??,??,??,????????,??????！ ??????-??????【??】??????????: ?????????????????,?????????????。????????????,???????,???????,?????,?????。 ??????-??????【??】??????????: ???????????? ???? ???? ???? ???? ???? ??????? ?????，????????????????. ??????-??????【??】??????????: ???????????、????、????、??????、????、????????,????????、?????????,?????。 ???????-???????【??】???????????: ?????????????????????,??????????,????????、????,??????????,??????????。 ???????-???????【??】???????????: ???????????????????、????,??100%????,??????,????????????,???????????! ???????-???????【??】???????????: ?????????,??????:?????,?????,??????,??????????,????????。????????! ??????-??????【??】??????????: ???????【.????.????.????.????.】??【??】:、??、??、??、??、??、??、??、??、??、??、?????。 ??????-??????【??】??????????: ??????????????????,????,??.??.??.??.??.??.??.???，????，???????! ??????-??????【??】??????????: ??????????????????、????、??????、????????,????????????,???????????！ ??????-??????【??】??????????: ?????????????????,???????????????。???????????,??????:????、????、???????！ ??????-??????【??】??????????: ?????????????????????,????,????,??????????。???????????????,??,??,??????????,??????... ??????-??????【??】??????????: ??????????????,?????????????,????,?????????,?????????????,?????,?????! ??????-??????【??】??????????: ????????????????，???????、???????????，????????、????、????、??????、????????。 ??????-??????【??】??????????: ????????????????、?????,????????????????????,????,????,??????。 ??????-??????【??】??????????: ?????????????:??????、????、????、????、????、??????、??????，???????! ??????-??????【??】??????????: ???????????? ???? ???? ???? ???? ???? ??????? ?????，????????????????. ??????-??????【??】??????????: ???????????????:?????? ???? ??????,???????,??????,???????。 ??????-??????【??】??????????: ????????????,????,??????????? ???? ???? ?????????,???,??,?????! ??????-??????【??】??????????: ???????????,????,????,??????,????“????、????、????、????”????????,??????. ??????-??????【??】??????????: ???????????、????、????、??????、????、????????,????????、?????????,?????。 ??????-??????【??】??????????: ?????????????????,?????????????。????????????,???????,???????,?????,?????。 ??????-??????【??】??????????: ?????????????????????????????、????、????、???????????,????,????! ??????-??????【??】??????????: ????????????????6?,???????????????????????????,??????????????,?????????！ ??????-??????【??】??????????: ????????????????8?，????????,????????,??????????,?????,????? ,????????! ??????-??????【??】??????????: ?????????????????,??????????????、???????、???????、???????、?????！ ??????-??????【??】??????????: ??????????????????????????,???????????,????????,?????????????????????。 ??????-??????【??】??????????: ????????????????????,????????????????,????????????????,??????！ ??????-??????【??】??????????: ????????????,????,??????????? ???? ???? ?????????,???,??,?????! ??????-??????【??】??????????: ???????????????????????????,???????????????????????,???????。 ??????-??????【??】??????????: ????????????????:?????? ???? ??????,???????,??????,???????。 ??????-??????【??】??????????: ?????????、???、??、??????????????????????????????,????????????????! ??????-??????【??】??????????: ????????????????????,????????:??、??、???,?????????????????????! ??????-??????【??】??????????: ?????????????,?????,???????????,???????,????,????,????,?????。 ??????-??????【??】??????????: ???????????????,????,???????、???????????,???????????,????,?????,???????。 ??????-??????【??】??????????: ??????????????????,???????????,??????????????,??????????，??????????????！ ??????-??????【??】??????????: ????????????????,?????????????? ??。??????????、????、????、?????????? ???????。 ??????-??????【??】??????????: ????????????,??????????、??????,??????????、????、????、???????。 ??????-??????【??】??????????: ?????????????、??????????????????,????????,?????,??????,????,????,????! ??????-??????【??】??????????: ??????????????????????,????????,??????????,?????,????? ,????????! ??????-??????【??】??????????: ??????????,????????,?????,???,???????????,???????????,?????,??????！ ??????-??????【??】??????????: ??????????,??????????????????????,???????????????,?????????????！ ??????-??????【??】??????????: ?????????????????????，?????????/?,,???????????,??????????????! ??????-??????【??】??????????: ????????????????,?????????、??、??、????,??????????,?????????????！ ??????-??????【??】??????????: ???????????、????、????、??????????,???,?????,???????????????. ??????-??????【??】??????????: ??????????????????????,?????, ... ????????????,????,????,?????,???????。

  Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >