Search Results

Search found 12390 results on 496 pages for 'zend tool'.

Page 324/496 | < Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >

• How to create a filesystem mountable by windows in linux?

  - by wcoenen

  I have attached an external USB disk to my debian gnu/linux system. The disk showed up as device /dev/sdc, and I prepared it like this: created a single partition with fdisk /dev/sdc (and some more commands in the interactive session that follows) formatted the partition with mkfs.msdos /dev/sdc1 If I then attach the USB disk to a Windows XP or Vista system, then no new drive becomes available. The disk and its partition show up fine in the disk managment tool under "computer management", but apparently the file system in the partition is not recognized. How do I create a FAT32 file system which can actually be used in windows? edit: I've given up on this and went with a NTFS file system created by windows. In debian lenny this can be mounted read-write but apparently it requires you to install the "ntfs-3g" package and explicitly pass the -t ntfs-3g option to the mount command.

  Read the article

• Adobe Acrobat: How to batch to combine multiple pdf files?

  - by Andrei Andre

  I have 3 folders: Folder 1 Folder 2 Folder 3 In each folder I have 5 pdf files: Folder 1 file1.pdf file2.pdf Folder 2 file1.pdf file2.pdf Folder 3 file1.pdf file2.pdf I want that in each folder to have a combined file of those two files: Folder 1 binder.pdf Folder 2 binder.pdf Folder 3 binder.pdf Any idea? Don't tell to do it manually. This case is just to explain you my problem. Think that I have hundreds of folders. :) Maybe I can use another tool instead of Adobe Acrobat?!

  Read the article

• Generate metadata of all files in a dir?

  - by nmuntz

  We are working on a project that is quite big, and its stored in an SVN repository under different folders with many files all over the place. Quite often, it is hard to locate the document that has a certain keyword or phrase. Does anyone know of any program that will generate and index the metadata of all the files that are in these documentation folders? (most filetypes are: xls, doc, ppt). Windows Search and Google Desktop could be an option but that would generally index the whole hard drive, emails, etc and thats probably much more than what we need and would not be suited for something more folder specific. Example of what im looking for: a program or webpage where i enter "John Doe" and it will show me all files in MyProjectFolder/ that contain the keyword "John Doe". This of course will already be indexed somewhere so searches should be almost instantaneous. Is there such a tool or i am asking too much? Thanks in advance!

  Read the article

• Windows webserver monitor and notifier service

  - by WestDiscGolf

  I'm looking for a software tool/service, preferably opensource/free, which will run on a Windows 2003 r3 standard server which will monitor bandwidth usage of all the websites it's hosting (a break down by site would be very useful) and also send out notifications if IIS or another service (as defined) stops responding. A web interface to see the bandwidth usage and other details would be very useful. I've personally got a vps which does this kinda of monitoring but I believe this is more linked into the host itself. Does anyone have any pointers? All help is appriciated. Cheers

  Read the article

• Converting Mercurial Repository To Sub Version (SVN)

  - by alexganose

  This may seem like a very strange situation. Initially we were using subversion (SVN) for version control... then we moved to mercurial and used a tool to convert our previous commits to a mercurial form. And now we want to move back to sub version however we can't seem to find anything that will allow us to keep out history from the mercurial commits and keep them in subversion form. Does anyone know if this is possible/ how to go about doing it? Thanks!!

  Read the article

• Animated HTTP request visualisation on Apache

  - by Simon Bennett

  This is more a question to appease my memory in trying to remember what it was I saw a while ago. I remember being introduced to a realtime server visualisation tool that showed the current requests that Apache was handling in a kind of fireworks effect on screen. Each request/group of requests would be shot across the screen in varying colours. I can't for the life for me remember what is was called and hunting around here and Google has left me empty handed. Just wondering if anybody else was able to plug this gem from the memory and ease my pain! Thanks

  Read the article

• How do I easily elevate when running a .jar file?

  - by Merlyn Morgan-Graham

  When trying to run an installer Jar file, I am getting an error saying that write access is denied to create a directory under the Program Files folder. Right click - Run as Administrator is not available on Jar files (I assume because it is Java.exe that consumes them - they are not themselves treated as directly executable by the shell). What is the quickest and simplest way to run a .Jar file with elevation? I am evaluating this tool to recommend for our dev team, and they will manually install it on their boxes. I'd prefer an option that doesn't require them to type anything.

  Read the article

• Norton Ghost usage, Linux? ISO? Server? MBR?

  - by OverTheRainbow

  Before evaluating Symantec/Norton Ghost to image partitions, I have a couple of questions about using this tool: In the product page, it only mentions Windows: Can Norton image Linux partitions as well? Can I burn an ISO to create/recover images? The ISO's I found seem only able to restore an image but not create one. Does it mean that images can only be created from within a running Windows? For Windows partitions: Does it support both regular and Server versions? Acronis doesn't image Server partitions in the regular version When restoring an image, does Norton give the option of including/excluding the MBR? Thank you.

  Read the article

• How to synchonise address books across multiple PC's

  - by Rob

  I am using Thunderbird 15.0.1 on two different Windows computers (Vista and Win 7). I maintain the email list for a local club, and often need to send out emails to all members from my home and office Pc's. I use a Thunderbird Address Book to maintain a list of club members and would like any changes made to that list to synchronise to both machines. Can anyone recommend a good way of doing this? I've found a couple of extensions that claim to do this, but both seem to have review that suggest they no longer function correctly since they are quite old extensions. Is there another tool that I would be better off using? Rob

  Read the article

• Simple dig output?

  - by knocte

  In a script I want to be able to write an IP address to somewhere easily, so I thought using dig (or a similar command) with back-ticks. However the simplest output I've been able to come up to wrt dig parameters is > dig -t A +noall +answer www.google.com www.google.com. 300 IN A 173.194.66.106 www.google.com. 300 IN A 173.194.66.104 Any way (extra arg, different tool instead of dig?) to get rid of the junk apart from the IP address?? (And please don't tell me to use sed.) Thanks

  Read the article

• Brand new Seagate HDD has high raw read error rate

  - by kpax

  I've just purchased a brand new Seagate ST31000524AS 1TB HDD. Manufacture date shows as January 2012 (yes that's as new as new can get), so must be one of the new batches from the post-flood Thailand. Anyway, I downloaded a copy of Active Hard Disk Monitor tool to check the S.M.A.R.T. parameters and I find the parameter Raw Read Error Rate is very low. Should I be worried? Will this rectify over time? This hdd is just 7 hours old; what gives? Edit: I meant high raw read error rate - Title updated accordingly

  Read the article

• Storing bundled AMI:s at Amazon EC2

  - by Industrial

  Hi everybody, I am totally new on configuring servers and working with EC2, so please bare with me. I managed after a lot of hair pulling to get a server with Ubuntu up and running with memcached and some other goodies that would make a great package for me. I thought that however, when storing it as an AMI with this tool I would be able to have memcached available next time I launched an instance based upon that image. What can I do to make sure that my configuration is saved properly to an instance? Question number two: - Can I someway make a command that is automatically run on server creation, like initiating memcache with "memcache -d -m 1700 -u root" or even a batch of them?

  Read the article

• SugarCRM CE Won't Install on Ubuntu 10.10

  - by Trenton Scott

  I have a fresh copy of Ubuntu 10.10 server with a working LAMP installation. I downloaded SugarCRM and browsed to its directory to open the installer (via Firefox). The installer appears fine, I accept the license agreement, and it proceeds to check file permissions. It advises that several directories need looser permissions (chmod 766), and I adjust them accordingly. After making the changes, I click "recheck" and the page just reloads as blank (white). There are no errors visible, nothing in the server logs (Apache/PHP) and installation cannot continue. I'm able to get back to the installation tool by readjusting permissions back to my default (0755 for directories, 0644 for files). All files/folders are owned by root and the www-data group. Any idea about what's wrong?

  Read the article

• Configuring Linux Network

  - by Reiler

  Hi I'm working on some software, that runs on a Centos 5.xx installation. I'ts not allowed for our customers to log in to Linux, everything is done from Windows applications, developed by us. So we have build a frontend for the user to configure network setup: Static/DHCP, ip-address, gateway, DNS, Hostname. Right now I let the user enter the information in the Windows app, and then write it on the Linux server like this: Write to /etc/resolv.conf: Nameserver Write to /etc/sysconfig/network: Gateway and Hostname Write to /etc/sysconfig/network-scripts/ifcfg-eth0: Ipaddress, Netmask, Bootproto(DHCP or Static) I also (after some time) found out that I was unable to send mail, unless I wrote in /etc/hosts: 127.0.0.1 Hostname All this seems to work, but is there a better/easier way to do this? Also, I read the network configuration nearly the same way, but if I use DHCP, I miss som information, for instance the Ip-address. I know that I can get some information from the commandline (ifconfig), but I dont get for instance Hostname, Gateway and DNS. Is there a commandline tool that will display this?

  Read the article

• Is there anything like mail goggles for outlook?

  - by Eugene M

  Gmail has a cool feature that requires user interaction to send an email at certain hours of the day called mail goggles. Is there anything remotely like this for outlook? More specifically, what I'd like is some dialog that has a personal reminder (to make sure certain steps have been taken, like seeing who needs cc'd) and some sort of forced user interaction, like a checkbox. The tool would prevent you from sending he email until you had completed the interaction. If not, would it be possible to make something like this in VBA or as an addin? I realize this sounds like a really annoying feature, but I have a friend who is having a lot of trouble building certain email habits and this would be a sure-fire way to help.

  Read the article

• how to install daemontools (supervise) on centos 5?

  - by solsol

  I'd like to use supervise to monitor httpd, mysqld and hudson processes on Centos 5. When any of these processes go down I'd like to use a tool to automatically restart them. I've read and heard about supervise, but couldn't find a way to install it on centos. Can anyone help me with that? Any other tools are also good, as long as they can be easily installed on centos 5 and allow me to automatically restart httpd, mysqld, hudson. Thanks for your help!

  Read the article

• linux/shell: change a file's modify timestamp relatively?

  - by index

  My Canon camera produces files like IMG_1234.JPG and MVI_1234.AVI. It also timestamps those files. Unfortunately during a trip to another timezone several cameras were used, one of which did not have the correct time zone set - meta data mess.. Now I would like to correct this (not EXIF, the file's "modify" timestamp on disk). Proposed algorithm: 1 read file's modify date 2 add delta, i.e. hhmmss (preferred: change timezone) 3 write new timestamp Unless someone knows a tool or a combination of tools that do the trick directly, maybe one could simplify the calculation using epoch time (seconds since ..) and whip up a shell script. Any help appreciated!

  Read the article

• How to write a ProxyPass rule to go from HTTPS to HTTP in IIRF

  - by Keith Nicholas

  I have a server which is running a web app that self serves HTTP. I'm wanting to use IIS6 (on the same server) to provide a HTTPS layer to this web app. From what I can tell doing a reverse proxy will allow me to do this. IIRF seems like the tool to do this job. There are no domain names involved.... its all ip numbers. So I think I want :- https:<ipnumber>:5001 to send all its requests to the same server but on a different port and use HTTP ( not exposed to the net ) http:<ipnumber>:5000 but not sure how to go about it with IIRF, I'm not entirely sure how to write the rules? I think I need to make a virtual web app on 5001 using HTTPS? then add a rules file.

  Read the article

• Difference in behavior of reboot

  - by LinuxPenseur

  Hi, I have 2 machines running linux. In one machine, the reboot command is an executable normally found in all linux distributions. In the second machine the reboot command is a shell script customized using some other hardware tool commands to reboot the system. One behavior difference between the 2 machines is that when i execute reboot command on the first machine, it shows another shell prompt and then only reboots. But in the case of second machine, it reboots without showing a shell prompt. I expect the second machine to behave the same way as first machine when reboot command is given. Currently i am analyzing the source code of shutdown.c and halt.c normally found in linux distributions, so that i can find out the implementation which produces the shell propmt on reboot and use that in the shell script in second machine. Kindly give me some pointers on where i should start looking to find the implementation. Thanks

  Read the article

• certificate error while subdomain forwarding

  - by rahulchandran

  I have a website, call it http://sub.example.com, hosted on, say, 72.xx.xx.x. There is a certificate for https://sub.example.com. Now I go into the DNS management tool in my hosting provider, and I set up the standard subdomain forwarding wherein https://sub.example.com forwards to 72.xx.xx.x. Now when I try to browse to https://sub.example.com, I get a certificate error saying it is for the wrong website. I have also tried forwarding http://sub.example.com to 72.xx.xx.x, and tried it with domain masking in both cases. I am still getting the certificate error no matter what. Additional wrinkle: if someone types in https://sub.example.com then the domain forwarding does not seem to work and IE just spins endlesssly and finally fails. How can I domain forward the https://sub.example.com to 72.xx.xx.x?

  Read the article

• including files in a symlink directory when backing up with duplicity

  - by Rob

  I'm backing up using Duplicity, great tool. I'm unable to include files in the backup that are within a directory that is a symlink. Using the following: duplicity <dup args> --include /var/www/**/current --exclude '**' duplicity will only backup the symlink I've tried: duplicity <dup args> --include /var/www/**/current/* --exclude '**' # and duplicity <dup args> --include /var/www/**/current/** --exclude '**' Not even then symlink is backed up. the "current" directory links to directory like: /var/www/host.com/de9f2c7fd25e1b3afad3e85a0bd17d9b100db4b3 The files contains a few static html & css files. I want those files to be backed up, regardless of which sha'd directory "current" points to. Any help appreciated.

  Read the article

• Configure Git to use Beyond Compare for image diff

  - by Barney

  Because we work with a number of sprites, the kind of specialised diff views provided by Beyond Compare would be ideal to see which one of 2 versions I'm after when conflicts arise. I've already configured Git to use Beyond Compare as my primary diff and merge tool as described in their integration guide — it specifically goes into how to configure TortoiseSVN to use it for images, and I've found these articles talking about .gitattributes in general and how to script interactions from a *nix shell — but it's not obvious to me how I can use the advice provided by these guides to make a simple change that would say "use the default diff & merge bindings for files determined to be images, too". For the record, I'm doing all this on Windows :P

  Read the article

• Video screen recording + add text (subtitle), export as .flv. What programs?

  - by RasmusWriedtLarsen

  I have to record a video to showcase a tool I've made. It's going to include my talking, but I also want some overlay text (subtitles) for people who doesn't have sound. I'm looking for a program that will let me add a text overlay (as subtitle) for my video, and if possible, export it as .flv . I've tried this so far: Used CamStudio for recording, using their lossless format. Converted the .avi file to a .flv using Any Video Converter (free version) I've been having some trouble with the output of CamStudio, some programs can't play the file right, it skips forward and backward. (VLC, Adobe Media Encoder CS4) So I'm looking for a program that accepts videos from CamStudio*, can add text to my video, and hopefully export as flv. *(If that's not possible I'm open for other recording programs). I'd like to ONLY use free programs, and I'm on Windows XP. Looking forward to your help :)

  Read the article

• Configuration tools for multiple monitors for X / Linux

  - by richard

  I have Ubuntu 10.04 running gnome and two monitors. I am wondering if a can get a better multi-monitor configuration tool. The one I have, gnome-display-properties, has too many problems, including: when I swapped my monitors over, the narrower one now on the left. There is a width calculation error, such that I have a virtual monitor the width of the wide-monitor on the narrow-monitor and part of the wide monitor. And a virtual narrow-monitor on the remainder of the wide-monitor. I would like: nobugs. to be able to select which is primary monitor. to have multiple configurations. configurations to be automatically selected based on which monitors are attached. configurations to be cycled (reliably) when display mode key is pressed. when a display is deactivated, for windows to migrate to remaining monitors. option to not change display resolution when mirroring, but to use side/top blanking bars to pad out screen.

  Read the article

• Can I use a wildcard to denote subdirectories as opposed to just files in the Windows Command Prompt

  - by Dinosaurus

  I know I can use a wildcard to list the files in a single directory: dir *.java However, does anyone know if it is possible to denote a subdirectory with a wildcard as well? I would like to do something like dir classes/*/*.java Where, it will list all the java files in every subdirectory beneath the classes directory. So, if there is: classes/cs1100/ classes/cs1200/ classes/cs1500/ It will list all the java files within these. Note, I'm not using this specifically for the "Dir" command, but instead another command line tool that accepts a list of files. But, if it works for Dir, it shoudl work in my other program as well.

  Read the article

< Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >