Search Results

Search found 14898 results on 596 pages for 'static initializer'.

Page 325/596 | < Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >

• Secure copying (file transfer) between two Linux servers in the same datacenter (Linode)

  - by MountainX

  I have two Linodes in the same data center. I want to copy files from one to the other each night or on demand (for about the next month, until this project is finished). So I'm thinking about using rsync. My question is how do I set up the two Linode servers to communicate via private IP addresses securely? Both servers are SSH hardened, they use denyhosts and have a fairly restrictive iptables setup. I know I need to first assign private IP addresses to each server, then configure static networking according to this guide. What is next? What SSH or iptables settings are needed to allow these two servers to communicate? What further info do I need to supply in this question? I'm looking for a basic step-by-step guide for how to do this.

  Read the article

• dd-wrt switch for PfSense

  - by Kmao

  I currently have eth2 on my pfsense set up, and configured as 192.168.1.1, it has dhcp setup with allocation being 192.168.1.10 - 192.168.1.245. On my dd-wrt box, i disabled the WAN, and set it to act as a port for the switch. I disabled dhcp, dnsmasq, spi firewall, Wlan0 and set a static IP for the router being 192.168.1.10 Pfsense is plugged into lan0 and pc plugged into lan1 (wan port is empty) I have followed a few different guides, but i can't seem to get my router to act as a switch. Anyone have success using DD-WRT as a switch while using pfsense as your dhcp/dns/gateway. Any advice would help :)

  Read the article

• Cross-Forest Trust

  - by cdalley

  I am looking at testing a cross-domain trust we can have two domain controllers (with different forests and domain names) setup so we can move everyone onto the new domain. We do NOT run exchange on site and we do not have any links to O365 to AD currently. Onto the problem: I have setup two DCs in a Virtual Machine: They are on the same network 192.168.0.* The Windows 2003 server: Name: OLDSRVR "Clone" of our current Domain Controller IP: 192.168.0.1 Domain: internal.test.com The Windows 2012 server: Name: ADCTEST01 Brand new domain setup from scratch separate to internal.test.com Domain: internal.test2.com IP: 192.168.0.2 OLDSRVR can only see ADCTEST if it has dynamic IP set. If I set a static IP it cannot see it. If I try using the dynamic IP and try to join it gets to the end then complains "??The trust relationship between this workstation and the primary domain failed" Any ideas?

  Read the article

• Use two networks at the same time?

  - by Christopher

  I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight

  Read the article

• Security measures for CentOS

  - by cappuccinodrinker

  I have been tightening up my web server security and wanted to know what else I can do. I am running CentOS 5 with these measures: - All passwords to FTP, MySQL etc are generated from grc.com/passwords.htm and microsoft.com/protect/fraud/passwords/create.aspx (for the ones which cannot be too long). - Running iptables with all ports shut off except for http mail and smtp, the important ports like FTP SSH are blocked to all except my static office IP. There is also no response to pings. - Rootkit Hunter running daily - The server is PCI compliant according to Comodo - Not running any crappy made php apps, we use Zend Framework for our stuff and do have kayako installed and keep them up to date. Can't really think of anything else I can do... I could implement a brute force measure, but I think I already have by simply changing my SSH port to a number above 10000 and blocking it off with iptables.

  Read the article

• Set Error-Pages for all Applications in Tomcat

  - by phisch

  I'm trying to set up custom error pages in tomcat 6, because I don't want the default ones to show up. My error pages are static html, no jsp or anything dynamic. I know how to do this through the web.xml in each application but I'd prefere to setup the error pages only once for the entire server. I tried to add the following fragment to the global web.xml (in conf), but no matter what I add under location, it does not show. <error-page> <error-code>404</error-code> <location>/404.html</location> </error-page> What do I need to do to gobally define custom error pages? Thanks!

  Read the article

• how to change interface ip in ifconfig with /etc/network/interfaces

  - by user2478348

  Hi everybody when modifiying /etc/network/interfaces, saving it and then executing ifconfig i can't see the modification i made..for example here is part of my /etc/network/interfaces: auto wlan1 iface wlan1 inet static address 192.168.0.60 netmask 255.255.255.0 gateway 192.168.0.61 you can see that the IP address of my wlan1 is 192.168.0.60 but when typing ifconfig i have this: wlan1 Link encap:Ethernet HWaddr 00:19:70:0f:c2:9c inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::219:70ff:fe0f:c29c/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:758 erreurs:0 :0 overruns:0 frame:0 TX packets:610 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:73490 (73.4 KB) Octets transmis:127883 (127.8 KB) (the inet adr:192.168.0.1 and not 198.168.0.60)..if someone can help me I'll be very thankful :)

  Read the article

• What is the most efficient way to add and removed Slick2D sprites?

  - by kirchhoff

  I'm making a game in Java with Slick2D and I want to create planes which shoots: int maxBullets = 40; static int bullet = 0; Missile missile[] = new Missile[maxBullets]; I want to create/move my missiles in the most efficient way, I would appreciate your advise: public void shoot() throws SlickException{ if(bullet<maxBullets){ if(missile[bullet] != null){ missile[bullet].resetLocation(plane.getCentreX(), plane.getCentreY(), plane.image.getRotation()); }else{ missile[bullet] = new Missile("resources/missile.png", plane.getCentreX(), plane.getCentreY(), plane.image.getRotation()); } }else{ bullet = 0; missile[bullet].resetLocation(plane.getCentreX(), plane.getCentreY(), plane.image.getRotation()); } bullet++; } I created the method resetLocation in my Missile class in order to avoid loading again the resource. Is it correct? In the update method I've got this to move all the missiles: if(bullet > 0 && bullet < maxBullets){ float hyp = 0.4f * delta; if(bullet == 1){ missile[0].move(hyp); }else{ for(int x = 0; x<bullet; x++){ missile[x].move(hyp); } } }

  Read the article

• What is bondib1 used for on SPARC SuperCluster with InfiniBand, Solaris 11 networking & Oracle RAC?

  - by user12620111

  A co-worker asked the following question about a SPARC SuperCluster InfiniBand network: > on the database nodes the RAC nodes communicate over the cluster_interconnect. This is the > 192.168.10.0 network on bondib0. (according to ./crs/install/crsconfig_params NETWORKS> setting) > What is bondib1 used for? Is it a HA counterpart in case bondib0 dies? This is my response: Summary: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic. Details: bondib0 is the cluster_interconnect $ oifcfg getif            bondeth0  10.129.184.0  global  public bondib0  192.168.10.0  global  cluster_interconnect ipmpapp0  192.168.30.0  global  public bondib0 and bondib1 are on 192.168.10.1 and 192.168.10.2 respectively. # ipadm show-addr | grep bondi bondib0/v4static  static   ok           192.168.10.1/24 bondib1/v4static  static   ok           192.168.10.2/24 Hostnames tied to the IPs are node1-priv1 and node1-priv2  # grep 192.168.10 /etc/hosts 192.168.10.1    node1-priv1.us.oracle.com   node1-priv1 192.168.10.2    node1-priv2.us.oracle.com   node1-priv2 For the 4 node RAC interconnect: Each node has 2 private IP address on the 192.168.10.0 network. Each IP address has an active InfiniBand link and a failover InfiniBand link. Thus, the 4 node RAC interconnect is using a total of 8 IP addresses and 16 InfiniBand links. bondib1 isn't being used for the Virtual IP (VIP): $ srvctl config vip -n node1 VIP exists: /node1-ib-vip/192.168.30.25/192.168.30.0/255.255.255.0/ipmpapp0, hosting node node1 VIP exists: /node1-vip/10.55.184.15/10.55.184.0/255.255.255.0/bondeth0, hosting node node1 bondib1 is on bondib1_0 and fails over to bondib1_1: # ipmpstat -g GROUP       GROUPNAME   STATE     FDT       INTERFACES ipmpapp0    ipmpapp0    ok        --        ipmpapp_0 (ipmpapp_1) bondeth0    bondeth0    degraded  --        net2 [net5] bondib1     bondib1     ok        --        bondib1_0 (bondib1_1) bondib0     bondib0     ok        --        bondib0_0 (bondib0_1) bondib1_0 goes over net24 # dladm show-link | grep bond LINK                CLASS     MTU    STATE    OVER bondib0_0           part      65520  up       net21 bondib0_1           part      65520  up       net22 bondib1_0           part      65520  up       net24 bondib1_1           part      65520  up       net23 net24 is IB Partition FFFF # dladm show-ib LINK         HCAGUID         PORTGUID        PORT STATE  PKEYS net24        21280001A1868A  21280001A1868C  2    up     FFFF net22        21280001CEBBDE  21280001CEBBE0  2    up     FFFF,8503 net23        21280001A1868A  21280001A1868B  1    up     FFFF,8503 net21        21280001CEBBDE  21280001CEBBDF  1    up     FFFF On Express Module 9 port 2: # dladm show-phys -L LINK              DEVICE       LOC net21             ibp4         PCI-EM1/PORT1 net22             ibp5         PCI-EM1/PORT2 net23             ibp6         PCI-EM9/PORT1 net24             ibp7         PCI-EM9/PORT2 Outbound traffic on the 192.168.10.0 network will be multiplexed between bondib0 & bondib1 # netstat -rn Routing Table: IPv4   Destination           Gateway           Flags  Ref     Use     Interface -------------------- -------------------- ----- ----- ---------- --------- 192.168.10.0         192.168.10.2         U        16    6551834 bondib1   192.168.10.0         192.168.10.1         U         9    5708924 bondib0   There is a lot more traffic on bondib0 than bondib1 # /bin/time snoop -I bondib0 -c 100 > /dev/null Using device ipnet/bondib0 (promiscuous mode) 100 packets captured real        4.3 user        0.0 sys         0.0 (100 packets in 4.3 seconds = 23.3 pkts/sec) # /bin/time snoop -I bondib1 -c 100 > /dev/null Using device ipnet/bondib1 (promiscuous mode) 100 packets captured real       13.3 user        0.0 sys         0.0 (100 packets in 13.3 seconds = 7.5 pkts/sec) Half of the packets on bondib0 are outbound (from self). The remaining packet are split evenly, from the other nodes in the cluster. # snoop -I bondib0 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib0 (promiscuous mode) 100 packets captured   49 node1-priv1.us.oracle.com   24 node2-priv1.us.oracle.com   14 node3-priv1.us.oracle.com   13 node4-priv1.us.oracle.com 100% of the packets on bondib1 are outbound (from self), but the headers in the packets indicate that they are from the IP address associated with bondib0: # snoop -I bondib1 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured  100 node1-priv1.us.oracle.com The destination of the bondib1 outbound packets are split evenly, to node3 and node 4. # snoop -I bondib1 -c 100 | awk '{print $3}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured   51 node3-priv1.us.oracle.com   49 node4-priv1.us.oracle.com Conclusion: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic.

  Read the article

• Staggering java linux process startup to prevent OOM

  - by ctennis

  I am running a number of java processes on a single Linux machine. From a memory and computing standpoint, everything is fine when things are static. However, periodically we use a configuration management package up upgrade the jar or war files, and restart the java process. The problem is, that is restarts them all relatively quickly, and so we get 10 or so java VMs restarting all at the same time (we use daemontools for the service stops/starts), which wreaks havoc on the machine, in terms of OOMs or just really slow. This is because it's spawning the JVM 10x at the same time. Other than trying to stagger the startups, is there a smarter way of handling this? Maybe a sysctl tuning performance parameters, or a JVM parameter?

  Read the article

• 12.10 Wireless hotspot configuration and internet browsing - question

  - by Indian

  In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

  Read the article

• Linksys WRT54GS V6 Router Blinking Power Light

  - by Frank

  I have a Linksys WRT54GS V6 Router in my possession got it at my local goodwill for 5$. Upon start up the Power LED starts flashing like crazy and at the same time the Ethernet ports all light up once then turn off (DMZ and WLAN never turn on). I can ping the router only by setting a static IP on my Pc. I can also successfully push a file (official Linksys OS and DD-wrt) into it via TFTP but this currently does nothing (no 192.1681.1 Access). Any ideas as to what may be wrong? I think its pretty obvious that it's bricked but.. I keep hearing a whole lot of "if it pings it's fixable" on the internet.

  Read the article

• NginX : Route user request to backend

  - by xperator

  The goal is to have NginX webserver act as a very basic & simple load balancer/fail-over. But instead of fetching static files from backend and serving it to user, I just want to route/redirect user request to one of the back end servers. upstream backend { server server1.example.com:80; server server2.example.com:80; server server3.example.com:80; } location / { proxy_pass http://backend; } Instead of : User request (example.com/test.file) NginX LB Backend NginX LB User I want to have : User request (example.com/test.file) NginX LB Backend User Is this even possible with NginX ? If not then How can I achieve this goal. UPDATE 1: Is there a way to use rewrite directive with backend upstream ? UPDATE 2: It's not really necessary to use NginX. I just want to have a direct reply from backend to user.

  Read the article

• Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

  - by ale

  I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

  Read the article

• Do you think Scala will be the dominant JVM langauge, ie be the next Java? [on hold]

  - by user1037729

  From what I've read about Scala do far I think it has some nice features but I do not think it should be "the next Java". It might however end up being the next Java (due to fashion rather than fact) but lets not hope it does not... To me adds a lot of complexity over Java which is a simple and scalable language. Scala Pattern matching allows you to perform some type/value checking in a more concise way, this is possible in Java, Scala's pattern matching has a limit to it, you cannot continuously match deeper and deeper down the object graph, so why not just stick to Java and use decent invariants? Scala provides tuples, easy enough to make in Java, create a static factory method and it all reads nicely too. Scala provides mixins, why not just use composition? I believe Scala implicit's are bad, they can lead to code becoming complex and hard to maintain, explicitness is good. Scala provides closures, well they will be in Java 8 too. Scala has lazy keyword for lazy instantiation, this is easy enough to do in Java by calling a getter which creates the instance when needed, no hidden magic here. Scala can be used with AKKA, well so can Java, there is an Java AKKA implementation. Scala offers addition functional features but these can all be created in Java, there are many frameworks with have implemented functional features in Java. All in all Scala seems to offer is addition complexity and thats it...

  Read the article

• What's the best way to compare blocks in a matching game that can be multiple colors?

  - by Ryan Detzel

  I have a match 3-4 game and the blocks can be one of 7 colors. There are an addition 7 blocks that are a mix of the original 7 colors so for example there is a red and blue block and there is also a red/blue block which can be matched with either the red or the blue. My original thought is just to use binary operations so. int red = 0x000000001; int blue = 0x000000010; int redblue = 0x000000011; Then just do an & operation so see if they match. Does this sound like a decent plan or am I over complicating it? edit: Better yet so it's more readable. int red = 1; int blue = 2; int red_blue = 3; int yellow = 4; int red_yellow = 5; maybe as defines or static vars?

  Read the article

• IPv6 6to4 on Windows Server

  - by Graham Wager

  I'm looking for a relatively simple guide to setting up an IPv6 tunnel properly. This network currently has a server (Windows Server 2008R2) running RRAS that establishes connectivity to the internet using a demand-dial PPPoE connection and handles the NAT. It also hosts a DNS server and DHCP. My ISP does not support IPv6, but I have a static IPv4 address. I've read about 6to4 and signed up at tunnelbroker.net, but quickly felt out of my depth. How do I configure my network to use it, and how I should configure my DHCP server with regards to IPv6 addresses?

  Read the article

• connect to a machine inside the intranet from outside with same address used inside

  - by pietrosld

  Hi all! I have a server inside my intranet, in wich i have apache running with some web applications. when i'm at office the url i use to connect is zeus.mydomain.it, it works couse i have in my /etc/hosts a record 192.168.0.11 zeus.mydomain.it, but obviously it does not work when i'm outside in different network. i have a internet connectino with static ip, so i can connect to my intranet form outside. the question is: how can i connect to the intranet server using zeus.mydomain.it from inside and from outside my intranet ? thanks!! Pietro.

  Read the article

• Routing Essentials

  - by zharvey

  I'm a programmer trying to fill a big hole in my understanding of networking basics. I've been reading a good book (Networking Bible by Sosinki) but I have been finding that there is a lot of "assumed" information contained, where terms/concepts are thrown at the reader without a proper introduction to them. I understand that a "route" is a path through a network. But I am struggling with visualizing some routing-based concepts. Namely: How do routes actually manifest themselves in the hardware? Are they just a list of IP addresses that get computed at the network layer, and then executed by the transport? What kind of data exists in a so-caleld routing table? Is a routing-table just the mechanism for holding these lists of IP address (read above)? What are the performance pros/cons for having a static route, as opposed to a dynamic route?

  Read the article

• In Nginx, can I handle both a location:url or a content-type: text/html response from memcached?

  - by Sean Foo

  I'm setting up an nginx - apache reverse proxy where nginx handles the static files and apache the dynamic. I have a search engine and depending on search parameter I either directly forward the user to the page they are looking for or provide a set of search results. I cache these results in memcached as key:/search.cgi?q=foo value: LOCATION:http://www.example.com/foo.html and key:/search.cgi?q=bar value: CONTENT-TYPE: text/html <html> .... .... </html> I can pull the "Content-type...." values out of memcached using nginx and send them to the user, but I can't quite figure out how to handle a returned value like "Location..." Can I?

  Read the article

• Vmware Workstation Development Server on Laptop

  - by Koobz

  I'm running an Ubuntu guest OS on my Windows 7 laptop. Currently, I have it set up for bridged networking. The guest is os is configured for a static ip of 192.168.1.115, which depending on the network I'm connected to, may not be available. When I want to view my development work I hit that up in my web browser. I'm really looking for the following scenario: 1) My guest OS ip address stays constant. 2) I can access my guest os even if I don't have an internet connection, or a lan/router. 3) I can share files with my guest/host. How does one accomplish this using VMware Workstation?

  Read the article

• Secure Coding Practices in .NET

  - by SoftwareSecurity

  Thanks to everyone who helped pack the room at the Fox Valley Day of .NET.   This presentation was designed to help developers understand why secure coding is important, what areas to focus on and additional resources.  You can find the slides here. Remember to understand what you are really trying to protect within your application.  This needs to be a conversation between the application owner, developer and architect.  Understand what data (or Asset) needs to be protected.  This could be passwords, credit cards, Social Security Numbers.   This also may be business specific information like business confidential data etc.  Performing a Risk and Privacy Assessment & Threat Model on your applications even in a small way can help you organize this process. These are the areas to pay attention to when coding: Authentication & Authorization Logging & Auditing Event Handling Session and State Management Encryption Links requested Slides Books The Security Development Lifecycle: SDL: A Process for Developing Demonstrably More Secure Software Threat Modeling Writing Secure Code The Web Application Hackers Handbook  Secure Programming with Static Analysis   Other Resources: OWASP OWASP Top 10 OWASP WebScarab OWASP WebGoat Internet Storm Center Web Application Security Consortium Events: OWASP AppSec 2011 in Minneapolis

  Read the article

• Locking down a server for shared internet hosting.

  - by Wil

  Basically I control several servers and I only host either static websites or scripts which I have designed, so I trust them up to a point. However, I have a few customers who want to start using scripts such as Wordpress or many others - and they want full control over their account. I have started to do the basics - like on php.ini, I have locked it down and restricted commands such as proc, however, there is obviously a lot more I can do. right now, using NTFS permissions, I am trying to lock down the server by running Application Pools and individual sites in their own user, however I feel like I am hitting brick walls... (My old question on Server Fault). At the moment, the only route I can think of is either to implement an off the shelf control panel - which will be expensive and quite frankly, over the top, or look at the Microsoft guide - which is really for an entire infrastructure, not for someone who just wants to lock down a few servers. Does anyone have any guides that can put me on the correct path?

  Read the article

• Why does my VertexDeclaration apparently not contain Position0?

  - by Phil

  I'm trying to get my code from calling each individual draw call down to using at least a VertexBuffer, and preferably an indexBuffer, but now that I'm attempting to test my code, I'm getting the error: The current vertex declaration does not include all the elements required by the current vertex shader. Position0 is missing. Which makes absolutely no sense to me, as my VertexDeclaration is: public readonly static VertexDeclaration VertexDeclaration = new VertexDeclaration( new VertexElement(0, VertexElementFormat.Vector3, VertexElementUsage.Position, 0), new VertexElement(sizeof(float) * 3, VertexElementFormat.Color, VertexElementUsage.Color, 0), new VertexElement(sizeof(float) * 3 + 4, VertexElementFormat.Vector3, VertexElementUsage.Normal, 0) ); Which clearly contains the information. I am attempting to draw with the following lines: VertexBuffer vb = new VertexBuffer(GraphicsDevice, VertexPositionColorNormal.VertexDeclaration, c.VertexList.Count, BufferUsage.WriteOnly); IndexBuffer ib = new IndexBuffer(GraphicsDevice, typeof(int), c.IndexList.Count, BufferUsage.WriteOnly); vb.SetData<VertexPositionColorNormal>(c.VertexList.ToArray()); ib.SetData<int>(c.IndexList.ToArray()); GraphicsDevice.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, vb.VertexCount, 0, c.IndexList.Count/3); Where c is a Chunk class containing an 8x8x8 array of boxes. Full code is available at https://github.com/mrbaggins/Box/tree/ProperMeshing/box/box. Relevant locations are Chunk.cs (Contains the VertexDeclaration) and Game1.cs (Draw() is in Lines 230-250). Not much else of relevance to this problem anywhere else. Note that large commented sections are from old version of drawing.

  Read the article

• Postfix - exclude messages with specific header values from relayhost?

  - by Kyle MacFarlane

  Starting with the following basic configuration to relay all messages in Postfix to PostMarkApp.com: #start postmarkapps settings smtp_sasl_auth_enable = yes smtp_sasl_password_maps = static:secret:secret (where "secret is your API key") smtp_sasl_security_options = noanonymous relayhost = [smtp.postmarkapp.com]:25 #end postmarkapp settings The problem with this is if for example something starts spitting our error messages they will all go through PostMark and cost money. One way to bypass relayhost is to setup sender_dependent_relayhost_maps and have certain addresses map back to yourdomain.com. But this doesn't work in web apps where all messages are sent by the same user but with varying From headers. So how can I achieve the same effect as sender_dependent_relayhost_maps but looking at the From or Subject headers instead of merely the user?

  Read the article

< Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >