Search Results

Search found 9436 results on 378 pages for 'component architecture'.

Page 326/378 | < Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >

• does anyone know of good delphi docking components?

  - by X-Ray

  we'd like to add movable panels to an application. presently we've used DevExpress docking library but have found them to be disappointingly quirky & difficult to work with. it also has some limitations that aren't so great. auto-hide, pinning, and moving of pages by drag-and-drop are all features we'd like to use. the built-in delphi docking doesn't seem to be full-featured enough to do the things we need (also see sample below). perhaps i should dig deeper into delphi's docking abilities...my initial impression is that they seem very toolbar-oriented rather than something i can drop a frame into. i'm not experienced at docking topics. my only experience has been with the DevExpress docking library where i needed to programmatically create & dock panels. is it my imagination or are DevExpress's products unduly difficult to use/learn? the DevExpress Ribbon Bar component compared to the d2009 Ribbon Bar was certainly a useful experience. i will migrate to the d2009 Ribbon Bar as soon as convenient to do so. it was refreshingly straight-forward to learn and use. a sharp contrast compared to the DevExpress equivalent. if it takes 4x as longer to make it using the DevExpress equivalent, it's time to change direction. what would you suggest in regard to the docking library? thank you for your suggestions/comments!

  Read the article

• Passing row from UIPickerView to integer CoreData attribute

  - by Gordon Fontenot

  I'm missing something here, and feeling like an idiot about it. I'm using a UIPickerView in my app, and I need to assign the row number to a 32-bit integer attribute for a Core Data object. To do this, I am using this method: -(void)pickerView:(UIPickerView *)pickerView didSelectRow:(NSInteger)row inComponent:(NSInteger)component { object.integerValue = row; } This is giving me a warning: warning: passing argument 1 of 'setIntegerValue:' makes pointer from integer without a cast What am I mixing up here? --EDIT 1-- Ok, so I can get rid of the errors by changing the method to do the following: NSNumber *number = [NSNumber numberWithInteger:row]; object.integerValue = rating; However, I still get a value of 0 for object.integerValue if I use NSLog to print it out. object.integerValue has a max value of 5, so I print out number instead, and then I'm getting a number above 62,000,000. Which doesn't seem right to me, since there are 5 rows. If I NSLog the row variable, I get a number between 0 and 5. So why do I end up with a completely different number after casting the number to NSNumber?

  Read the article

• what dataprovider in flex (aside from ArrayCollection) will work for single, non-repeating XML nodes

  - by Rees

  hello, i asked this question before but haven't been able to get an answer.. i get the following error when i retrieve an XML that only has 1 node (no repeating nodes) from a PHP page and i try to store in an ArrayCollection. -When I have MORE than 1 "name" nodes...i do NOT get an error. TypeError: Error #1034: Type Coercion failed: cannot convert "XXXXXX" to mx.collections.ArrayCollection. this error occurs as the line of code: myList= e.result.list.name; I'm using this ArrayCollection as a dataprovider for a Component -is there an alternative I can use that will take BOTH single and repeating nodes as well as work as a dataprovider? Thanks in advance! code: [Bindable] private var myList:ArrayCollection= new ArrayCollection(); private function getList(e:Event):void{ var getStudyLoungesService:HTTPService = new HTTPService(); getStuffService.url = "website.com/asdf.php"; getStuffService.addEventListener(ResultEvent.RESULT, onGetList); getStuffService.send(); } private function onGetList(e:ResultEvent):void{ myList= e.result.list.name; }

  Read the article

• Old desktop programmer wants to create S+S project

  - by Craig

  I have an idea for a product that I want to be web-based. But because I live in Brasil, the internet is not always available so there needs to be a desktop component that is available for when the internet is down. Also, I have been a SQL programmer, a desktop application programmer using dBase, VB and Pascal, and I have created simple websites using HTML and website creation tools, such as Frontpage. So from my research, I think I have the following options; PHP, Ruby on Rails, Python or .NET for the programming side. MySQL for the DB. And Apache, or possibly IIS, for the webserver. I will probably start with a local ISP provider for the cloud servce. But then maybe move to something more "robust" and universal in the future, ie. Amazon, or Azure, or something along that line. My question then is this. What would you recommend for something like this? I'm sure that I have not listed all of the possibilities, but the ones I have researched and thought of. Thanks everyone, Craig

  Read the article

• Getting a connection from a Sybase datasource in WAS 6.1 fails with message "User name property miss

  - by Abel Morelos

  I have a standalone application that needs to connect to a Sybase database via a datasource, I'm trying to connect using getConnection() and get the connection from this Sybase datasource which is hosted in WAS 6.1, sadly I'm getting an error JZ004 - Sybase(R) jConnect for JDBC(TM) Programmer's Reference: SQL Exception and Warning Messages JZ004 error message is: User name property missing in DriverManager.getConnection(..., Properties) Action: Provide the required user property. As you can see, this is not a connectivity (so we can discard JNDI or lookup problems), but rather a configuration problem. For my Sybase datasource in WAS 6.1 I have set up the proper authentication alias (Component-managed Authentication Alias), and I know the credentials are alright, "Test Connection" is successful for this datasource. Somebody had a similar problem and was because of the authentication alias- http://forum.springsource.org/showthread.php?t=39915 Next, I tried calling getConnection() but now I provided the credentials like getConnection(user, password)... and this time it worked!!! So I suspect that somehow WAS 6.1 is not picking or taking the authentication info I set in the datasource as mentioned before. If you think that maybe getConnection(user, password) should be OK for my case, well, that's not the case since I have a requirement to keep the credentials in the server, the standalone application only needs to know the JNDI information to lookup the datasource. Please let me know if have faced a similar problem, or what would you suggest me to do. Thanks.

  Read the article

• Multiple, Simultaneous Factories and Protocols in Twisted: Same Service, Different Ports

  - by RichardCroasher

  Greetings, Forum. I'm working on a program in Python that uses Twisted to manage networking. The basis of this program is a TCP service that is to listen for connections on multiple ports. However, instead of using one Twisted factory to handle a protocol object for each port, I am trying to use a separate factory for each port. The reason for this is to force a separation among the groups of clients connecting to the different ports. Unfortunately, it appears that this architecture isn't quite working: clients that connect to one port appear to be available among all the factories (e.g., the protocol class used by each factory includes a 'self.factory.clients.append (self)' statement...instead of adding a given client to just the factory for a particular port, the client is added to all factories), and whenever I shutdown service on one port the listeners on all ports also stop. I've been working with Twisted for a short while, and fear I simply don't fully understand how its factory classes are managed. My question is: is it simply not possible to have multiple, simultaneous instances of the same factory and same protocol in use across different ports (without these instances stepping on each other's toes)?

  Read the article

• I can't set a border around my StackPanel. Any help?

  - by Sergio Tapia

  Here's my XAML code: <Window x:Class="CarFinder.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Search for cars in TuMomo" Height="480" Width="600"> <DockPanel Margin="8"> <Border CornerRadius="6" BorderBrush="Gray" Background="LightGray" BorderThickness="2" Padding="8"> <StackPanel Orientation="Horizontal" DockPanel.Dock="Top" Height="25"> <TextBlock FontSize="14" Padding="0 0 8 0"> Search: </TextBlock> <TextBox x:Name="txtSearchTerm" Width="400" /> <Image Source="/CarFinder;component/Images/Chrysanthemum.jpg" /> </StackPanel> </Border> <StackPanel Orientation="Horizontal" DockPanel.Dock="Top" Height="25"> </StackPanel> </DockPanel> </Window> The border is set around the entire window. And also, when I create another StackPanel it's added to the right of my previous StackPanel instead of being added under it. What's the reason for this?

  Read the article

• How can I fetch Google static maps with TIdHTTP?

  - by cloudstrif3

  I'm trying to return content from maps.google.com from within Delphi 2006 using the TIdHTTP component. My code is as follows procedure TForm1.GetGoogleMap(); var t_GetRequest: String; t_Source: TStringList; t_Stream: TMemoryStream; begin t_Source := TStringList.Create; try t_Stream := TMemoryStream.Create; try t_GetRequest := 'http://maps.google.com/maps/api/staticmap?' + 'center=Brooklyn+Bridge,New+York,NY' + '&zoom=14' + '&size=512x512' + '&maptype=roadmap' + '&markers=color:blue|label:S|40.702147,-74.015794' + '&markers=color:green|label:G|40.711614,-74.012318' + '&markers=color:red|color:red|label:C|40.718217,-73.998284' + '&sensor=false'; IdHTTP1.Post(t_GetRequest, t_Source, t_Stream); t_Stream.SaveToFile('google.html'); finally t_Stream.Free; end; finally t_Source.Free; end; end; However I keep getting the response HTTP/1.0 403 Forbidden. I assume this means that I don't have permission to make this request but if I copy the url into my web browser IE 8, it works fine. Is there some header information that I need or something else?

  Read the article

• Reinstalling assemblies for new user after reboot, why?

  - by Marko Benko

  Hi - I have Installshield InstallScript MSI aka "Full" setup and Installshield Basic MSI aka "Patch" setup. Full setup copies some files to GAC, some to folder, etc. Patch setup replaces some files in GAC and some in installation folder. How ingenious, isn't it? :) Also, patch setup is designed that none of its actions are visible after installation. I'm changing some properties in sequences for that(damn, can't remember which ones, will look it up). When patch is applied, application works well(administrator user), but when rebooting a computer and logging in as a different (just domain, not admin) user, application doesn't work. In trace I have found an error line stating that installation of one of the components(to be precise, component which puts files to GAC) failed. Says that there is no installation source for it... Why is this so? Setup is set to install for everyone, patch is just replacing some files, why does it need to "install" something when a new user logs in? Thanks, Marko

  Read the article

• Embedding Lua functions as member variables in Java

  - by Zarion

  Although the program I'm working on is in Java, answering this from a C perspective is also fine, considering that most of this is either language-agnostic, or happens on the Lua side of things. In the outline I have for the architecture of a game I'm programming, individual types of game objects within a particular class (eg: creatures, items, spells, etc.) are loaded from a data file. Most of their properties are simple data types, but I'd like a few of these members to actually contain simple scripts that define, for example, what an item does when it's used. The scripts will be extremely simple, since all fundamental game actions will be exposed through an API from Java. The Lua is simply responsible for stringing a couple of these basic functions together, and setting arguments. The question is largely about the best way to store a reference to a specific Lua function as a member of a Java class. I understand that if I store the Lua code as a string and call lua_dostring, Lua will compile the code fresh every time it's called. So the function needs to be defined somehow, and a reference to this specific function wrapped in a Java function object. One possibility that I've considered is, during the data loading process, when the loader encounters a script definition in a data file, it extracts this string, decorates the function name using the associated object's unique ID, calls lua_dostring on the string containing a full function definition, and then wraps the generated function name in a Java function object. A function declared in script run with lua_dostring should still be added to the global function table, correct? I'm just wondering if there's a better way of going about this. I admit that my knowledge of Lua at this point is rather superficial and theoretical, so it's possible that I'm overlooking something obvious.

  Read the article

• JDBC/OSGi and how to dynamically load drivers without explicitly stating dependencies in the bundle?

  - by Chris

  Hi, This is a biggie. I have a well-structured yet monolithic code base that has a primitive modular architecture (all modules implement interfaces yet share the same classpath). I realize the folly of this approach and the problems it represents when I go to deploy on application servers that may have different conflicting versions of my library. I'm dependent on around 30 jars right now and am mid-way though bnding them up. Now some of my modules are easy to declare the versioned dependencies of, such as my networking components. They statically reference classes within the JRE and other BNDded libraries but my JDBC related components instantiate via Class.forName(...) and can use one of any number of drivers. I am breaking everything up into OSGi bundles by service area. My core classes/interfaces. Reporting related components. Database access related components (via JDBC). etc.... I wish for my code to be able to still be used without OSGi via single jar file with all my dependencies and without OSGi at all (via JARJAR) and also to be modular via the OSGi meta-data and granular bundles with dependency information. How do I configure my bundle and my code so that it can dynamically utilize any driver on the classpath and/or within the OSGi container environment (Felix/Equinox/etc.)? Is there a run-time method to detect if I am running in an OSGi container that is compatible across containers (Felix/Equinox/etc.) ? Do I need to use a different class loading mechanism if I am in a OSGi container? Am I required to import OSGi classes into my project to be able to load an at-bundle-time-unknown JDBC driver via my database module? I also have a second method of obtaining a driver (via JNDI, which is only really applicable when running in an app server), do I need to change my JNDI access code for OSGi-aware app servers?

  Read the article

• How to make Jtable column contain checkboxes?

  - by theraven

  Preface: I am horrible with java, and worse with java ui components. I have found several different tutorials on how to add buttons to tables, however I am struggling with adding checkboxes. I need to have a column that draws a text box ticked on default (cell renderer i think handles that), then on click of tickbox, unticks the box, redraws said box, and fires off an event somewhere I can track. currently I have a custom cellrenderer: public class GraphButtonCellRenderer extends JCheckBox implements TableCellRenderer { public GraphButtonCellRenderer() { } public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) { if(isSelected) setSelected(true); else setSelected(false); setMargin(new Insets(0, 16, 0, 0)); setIconTextGap(0); setBackground(new Color(255,255,255,0)); return this; }} Which currently handles drawing the tick box, but only ticks and unticks the box if that row is selected. But I don't know how to handle the events. Really what I am asking is possibly a link to a good tutorial on how to add checkboxes cleanly to a JTable. Any assist is greatly appreciated :)

  Read the article

• Hybrid EAV/CR model via WCF (and statically-typed language)?

  - by Pat

  Background I'm working on the architecture for a cloud-based LOB application, using Silverlight for the client, WCF, ASP.NET/C# for server and SQL Server for storage. The data model requires some flexibility per user (ability to add custom properties and define validation rules for them, for example), and a hybrid EAV/CR persistence model on the server side will suit nicely. Problem I need an efficient and maintainable technology and approach to handle the transformation from the persisted EAV model to/from WCF (and similarly allow the client to bind to the resulting data - DataGrid is a key UI element)? Admission: I don't yet know enough about WCF to understand if it supports ExpandoObject directly, but I suspect it will. Options I started off looking at WCF RIA services, but quickly discovered they're heavily dependent upon both static type data and compile-time code generation. Neither of these appeal. The options I'm considering include: Using WCF RIA services and pass the data over the network directly in EAV form (i.e. Dictionary), and handle the binding issue purely on the client side (like this) Using a dynamic language (probably IronPython) to handle both ends of the communication, with plumbing to generate the necessary CLR type data on the client to allow binding, and transform to/from EAV form on the server (spam preventer stopped me from posting a URL here, I'll try it in a comment). Dynamic LINQ (CreateClass() and friends), although I'm way out of my depth there and don't know what the limitations on that approach might be yet. I'm interested in comments on these approaches as well as alternative approaches that might solve the problem. Other Notes The Silverlight client will not be the only consumer of the service, making me slightly uncomfortable with option #1 above. While the data model is flexible, it's not expected to be modified heavily. For argument's sake, we could assume that we might have 25 distinct data models active at a given time, with something like 10-20 unique data fields/rules each. Modifications to the data model will happen infrequently (typically when a new user is initially configured).

  Read the article

• Tool for generating flat files from SQL objects dynamically

  - by Fabio Gouw

  Hello! I'm looking for a tool or component that generates flat files given a SQL Server's query result (from a stored procedure or a SELECT * over a table or view). This will be a batch process which runs every day, and every day a new file is created. I could use SQL Server Integration Services (DTS), but I have a mandatory requirement: the output of the file need to be dynamic. If a new column is added in my query result, the file must have this new column too, without having to modify my SSIS package. If a column is removed, then the flat file no longer will have it. I’ve tried to do this with SSIS, but when I create a new package I need to specify the number of columns. Another requirement is configuring the format of the output, depending on the data type of the column. If it’s a datetime, the format needs to be YYYY-MM-DD. If it’s a float, then I need to use 2 decimal digits, and so on. Does anyone know a tool that does this job? Thanks

  Read the article

• Could Python's logging SMTP Handler be freezing my thread for 2 minutes?

  - by Oddthinking

  A rather confusing sequence of events happened, according to my log-file, and I am about to put a lot of the blame on the Python logger, which is a bold claim. I thought I should get some second opinions about whether what I am saying could be true. I am trying to explain why there is are several large gaps in my log file (around two minutes at a time) during stressful periods for my application when it is missing deadlines. I am using Python's logging module on a remote server, and have set-up, with a configuration file, for all logs of severity of ERROR or higher to be emailed to me. Typically, only one error will be sent at a time, but during periods of sustained problems, I might get a dozen in a minute - annoying, but nothing that should stress SMTP. I believe that, after a short spurt of such messages, the Python logging system (or perhaps the SMTP system it is sitting on) is encountering errors or congestion. The call to Python's log is then BLOCKING for two minutes, causing my thread to miss its deadlines. (I was smart enough to move the logging until after the critical path of the application - so I don't care if logging takes me a few seconds, but two minutes is far too long.) This seems like a rather awkward architecture (for both a logging system that can freeze up, and for an SMTP system (Ubuntu, sendmail) that cannot handle dozens of emails in a minute**), so this surprises me, but it exactly fits the symptoms. Has anyone had any experience with this? Can anyone describe how to stop it from blocking? ** EDIT: I actually counted. A little under 4000 short emails in two hours. So far more than I suggested, sorry. But enough to over-fill a Sendmail's buffers?

  Read the article

• Database design for a media server containing movies, music, tv and everything in between?

  - by user364114

  In the near future I am attempting to design a media server as a personal project. MY first consideration to get the project underway is architecture, it will certainly be web based but more specifically than that I am looking for suggestions on the database design. So far I am considering something like the following, where I am using [] to represent a table, the first text is the table name to give an idea of purpose and the items within {} would be fields of the table. Also not, fid is functional id referencing some other table. [Item {id, value/name, description, link, type}] - this could be any entity, single song or whole music album, game, movie - almost see this as a recursive relation, ie. a song is an item but an album that song is part of is also an item or for example a tv season is an item, with multiple items being tv episodes [Type {id, fid, mime type, etc}] - file type specific information - could identify how code handles streaming/sending this item to a user [Location {id, fid, path to file?}] [Users {id, username, email, password, ...? }] - user account information [UAC {id, fid, acess level}] - i almost feel its more flexible to seperate access control permissions form the user accounts themselves [ItemLog {id, fid, fid2, timestamp}] - fid for user id, and fid2 for item id - this way we know what user access what when [UserLog {id, fid, timestamp}] -both are logs for access, whether login or last item access [Quota {id, fid, cap}] - some sort of way to throttle users from queing up the entire site and letting it download ... Suggestions or comments are welcome as the hope is that this project will be a open source project once some code is laid out.

  Read the article

• Apache - "dynamic" rewrite rule

  - by Christian A. Rasmussen

  Hi there. I'm working on a Zend Framework project where I've stumbled across a bit of a problem. The problem originates from the fact that modules are 2nd class citizens in Zend Framework. In my project, I'd like for each module to have a folder containing files which are to be accessed from the outside - files such as stylesheets, javascripts and images. Now, how is this to be done. With a Zend Framework project I have a folder structure which looks like this: application/ modules/ moduleOne/ public/ stylesheet.css moduleTwo/ moduleThree/ public/ index.php The standard .htaccess file located in the public/ folder holds this: SetEnv APPLICATION_ENV development RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] The way it works, is that the project's apache DocumentRoot is the public/ folder. All requests gets redirected through the index.php file where Zend Framework's router component takes over. Now, I'm by no means an expert with Apache nor mod_rewrite so pardon me if this is just silly. I imagine that I implement an extra step in the existing rewrite rule so that if I request http://project/public/moduleOne/stylesheet.css it will for instance resolve to /var/www/project/application/modules/moduleOne/public/stylesheet.css. So the steps which need to be done is to check if the first element in the URI is public/ if it is, we take the next segment as the modules name and use that in the path we're trying to resolve to and attempt to serve the file. Is this at all possible or does anyone have a better suggestion? Thank you for your time Christian Rasmussen

  Read the article

• Reasons for & against a Database

  - by dbemerlin

  Hi, i had a discussion with a coworker about the architecture of a program i'm writing and i'd like some more opinions. The Situation: The Program should update at near-realtime (+/- 1 Minute). It involves the movement of objects on a coordinate system. There are some events that occur at regular intervals (i.e. creation of the objects). Movements can change at any time through user input. My solution was: Build a server that runs continously and stores the data internally. The server dumps a state-of-the-program at regular intervals to protect against powerfailures and/or crashes. He argued that the program requires a Database and i should use cronjobs to update the data. I can store movement information by storing startpoint, endpoint and speed and update the position in the cronjob (and calculate collisions with other objects there) by calculating direction and speed. His reasons: Requires more CPU & Memory because it runs constantly. Powerfailures/Crashes might destroy data. Databases are faster. My reasons against this are mostly: Not very precise as events can only occur at full minutes (wouldn't be that bad though). Requires (possibly costly) transformation of data on every run from relational data to objects. RDBMS are a general solution for a specialized problem so a specialized solution should be more efficient. Powerfailures (or other crashes) can leave the Data in an undefined state with only partially updated data unless (possibly costly) precautions (like transactions) are taken. What are your opinions about that? Which arguments can you add for any side?

  Read the article

• MVVM pattern: ViewModel updates after Model server roundtrip

  - by Pavel Savara

  I have stateless services and anemic domain objects on server side. Model between server and client is POCO DTO. The client should become MVVM. The model could be graph of about 100 instances of 20 different classes. The client editor contains diverse tab-pages all of them live-connected to model/viewmodel. My problem is how to propagate changes after server round-trip nice way. It's quite easy to propagate changes from ViewModel to DTO. For way back it would be possible to throw away old DTO and replace it whole with new one, but it will cause lot of redrawing for lists/DataTemplates. I could gather the server side changes and transmit them to client side. But the names of fields changed would be domain/DTO specific, not ViewModel specific. And the mapping seems nontrivial to me. If I should do it imperative way after round-trip, it would break SOC/modularity of viewModels. I'm thinking about some kind of mapping rule engine, something like automappper or emit mapper. But it solves just very plain use-cases. I don't see how it would map/propagate/convert adding items to list or removal. How to identify instances in collections so it could merge values to existing instances. As well it should propagate validation/error info. Maybe I should implement INotifyPropertyChanged on DTO and try to replay server side events on it ? And then bind ViewModel to it ? Would binding solve the problems with collection merges nice way ? Is EventAgregator from PRISM useful for that ? Is there any event record-replay component ? Is there better client side pattern for architecture with server side logic ?

  Read the article

• Can a standalone ruby script (windows and mac) reload and restart itself?

  - by user30997

  I have a master-workers architecture where the number of workers is growing on a weekly basis. I can no longer be expected to ssh or remote console into each machine to kill the worker, do a source control sync, and restart. I would like to be able to have the master place a message out on the network that tells each machine to sync and restart. That's where I hit a roadblock. If I were using any sane platform, I could just do: exec('ruby', __FILE__) ...and be done. However, I did the following test: p Process.pid sleep 1 exec('ruby', __FILE__) ...and on Windows, I get one ruby instance for each call to exec. None of them die until I hit ^C on the window in question. On every platform I tried this on, it is executing the new version of the file each time, which I have verified this by making simple edits to the test script while the test marched along. The reason I'm printing the pid is to double-check the behavior I'm seeing. On windows, I am getting a different pid with each execution - which I would expect, considering that I am seeing a new process in the task manager for each run. The mac is behaving correctly: the pid is the same for every system call and I have verified with dtrace that each run is trigging a call to the execve syscall. So, in short, is there a way to get a windows ruby script to restart its execution so it will be running any code - including itself - that has changed during its execution? Please note that this is not a rails application, though it does use activerecord.

  Read the article

• I'm trying to install psycopg2 onto Mac OS 10.6.3; it claims it can't find "stdarg.h" but I can see

  - by cojadate

  I'm desperately trying to successfully install psycopg2 but keep running into errors. The latest one seems to involve it not being to find "stdarg.h" (see code below). However I can see with my own eyes that a file called stdarg.h exists at /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h (where it claims it can't find anything) so I've no idea what to do about it. I'm running Mac OS 10.6.3 and within the last few days I've made sure I have all the latest OS developer tools. I have Python 2.6.2 and PostgreSQL 8.4 if that makes any difference. python setup.py install running install running build running build_py running build_ext building 'psycopg2._psycopg' extension creating build/temp.macosx-10.3-fat-2.6 creating build/temp.macosx-10.3-fat-2.6/psycopg gcc -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -fno-strict-aliasing -fno-common -dynamic -DNDEBUG -g -O3 -DPSYCOPG_DEFAULT_PYDATETIME=1 -DPSYCOPG_VERSION="2.2.1 (dt dec ext pq3)" -DPG_VERSION_HEX=0x080404 -DPSYCOPG_EXTENSIONS=1 -DPSYCOPG_NEW_BOOLEAN=1 -DHAVE_PQFREEMEM=1 -DHAVE_PQPROTOCOL3=1 -I/Library/Frameworks/Python.framework/Versions/2.6/include/python2.6 -I. -I/opt/local/include/postgresql84 -I/opt/local/include/postgresql84/server -c psycopg/psycopgmodule.c -o build/temp.macosx-10.3-fat-2.6/psycopg/psycopgmodule.o In file included from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/unicodeobject.h:4, from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/Python.h:85, from psycopg/psycopgmodule.c:27: /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h:4:25: error: stdarg.h: No such file or directory In file included from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/unicodeobject.h:4, from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/Python.h:85, from psycopg/psycopgmodule.c:27: /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h:4:25: error: stdarg.h: No such file or directory lipo: can't figure out the architecture type of: /var/folders/MQ/MQ-tWOWWG+izzuZCrAJpzk+++TI/-Tmp-//ccakFhRS.out error: command 'gcc' failed with exit status

  Read the article

• Why is this SocketException not caught by a generic catch routine?

  - by Tarnschaf

  Our company provides a network component (DLL) for a GUI application. It uses a Timer that checks for disconnections. If it wants to reconnect, it calls: internal void timClock_TimerCallback(object state) { lock (someLock) { // ... try { DoConnect(); } catch (Exception e) { // Log e.Message omitted // Raise event with e as parameter ErrorEvent(this, new ErrorEventArgs(e)); DoDisconnect(); } // ... } } So the problem is, inside of the DoConnect() routine a SocketException is thrown (and not caught). I would assume, that the catch (Exception e) should catch ALL exceptions but somehow the SocketException was not caught and shows up to the GUI application. protected void DoConnect() { // client = new TcpClient(); client.NoDelay = true; // In the following call the SocketException is thrown client.Connect(endPoint.Address.ToString(), endPoint.Port); // ... (login stuff) } The doc confirmed that SocketException extends Exception. The stacktrace that showed up is: TcpClient.Connect() -> DoConnect() -> timClock_TimerCallback So the exception is not thrown outside the try/catch block. Any ideas why it doesn't work?

  Read the article

• Finding usage of jQuery UI in a big ugly codebase

  - by Daniel Magliola

  I've recently inherited the maintenance of a big, ugly codebase for a production website. Poke your eyes out ugly. And though it's big, it's mostly PHP code, it doesn't have much JS, besides a few "ajaxy" things in the UI. Our main current problem is that the site is just too heavy. Homepage weighs in at 1.6 Mb currently, so I'm trying to clean some stuff out. One of the main wasters is that every single page includes the jQuery UI library, but I don't think it's used at all. It's definitely not being used in the homepage and in most pages, so I want to only include the where necessary. I'm not really experienced with jQuery, i'm more of a Prototype guy, so I'm wondering. Is there anything I could search for that'd let me know where jQuery UI is being used? What i'm looking for is "common strings", component names, etc For example, if this was scriptaculous, i'd look for things like "Draggable", "Effect", etc. Any suggestions for jQuery UI? (Of course, if you can think of a more robust way of removing the tag from pages that don't use it without breaking everything, I'd love to hear about it) Thanks!! Daniel

  Read the article

• Uncaught TypeError: Object [object Object] has no method 'onAdded'

  - by user3604227

  I am using ExtJS4 with Java servlets. I am following the MVC architecture for ExtJS. I am trying a simple example of displaying a border layout but it doesnt work and I get the following error in ext-all.js in the javascript console: Uncaught TypeError: Object [object Object] has no method 'onAdded' Here is my code: app.js Ext.Loader.setConfig({ enabled : true }); Ext.application({ name : 'IN', appFolder : 'app', controllers : [ 'Items' ], launch : function() { console.log('in LAUNCH-appjs'); Ext.create('Ext.container.Viewport', { items : [ { xtype : 'borderlyt' } ] }); } }); Items.js (controller) Ext.define('IN.controller.Items', { extend : 'Ext.app.Controller', views : [ 'item.Border' ], init : function() { this.control({ 'viewport > panel' : { render : this.onPanelRendered } }); }, onPanelRendered : function() { console.log('The panel was rendered'); } }); Border.js (view) Ext.define('IN.view.item.Border',{extend : 'Ext.layout.container.Border', alias : 'widget.borderlyt', title : 'Border layout' , autoShow : true, renderTo : Ext.getBody(), defaults : { split : true, layout : 'border', autoScroll : true, height : 800, width : 500 }, items : [ { region : 'north', html : "Header here..", id : 'mainHeader' }, { region : 'west', width : 140, html : "Its West..", }, { region : 'south', html : "This is my temp footer content", height : 30, margins : '0 5 5 5', bodyPadding : 2, id : 'mainFooter' }, { id : 'mainContent', collapsible : false, region : 'center', margins : '5', border : true, } ] }); The folder structure for the Webcontent is as follows: WebContent app controller Items.js model store view item Border.js ext_js resources src ext_all.js index.html app.js Can someone help me resolve this error? Thanks in advance

  Read the article

• How to hide some nodes in Richfaces Tree (do not render nodes by condition)?

  - by VestniK

  I have a tree of categories and courses in my SEAM application. Courses may be active and inactive. I want to be able to show only active or all courses in my tree. I've decided to always build complete tree in my PAGE scope component since building this tree is quite expensive operation. I have boolean flag courseActive in the data wrapped by TreeNode<T>. Now I can't find the way to show courses node only if this flag is true. The best result I've achieved with the following code: <h:outputLabel for="showInactiveCheckbox" value="show all courses: "/> <h:selectBooleanCheckbox id="showInactiveCheckbox" value="#{categoryTreeEditorModel.showAllCoursesInTree}"> <a4j:support event="onchange" reRender="categoryTree"/> </h:selectBooleanCheckbox> <rich:tree id="categoryTree" value="#{categoryTree}" var="item" switchType="ajax" ajaxSubmitSelection="true" reRender="categoryTree,controls" adviseNodeOpened="#{categoryTreeActions.adviseRootOpened}" nodeSelectListener="#{categoryTreeActions.processSelection}" nodeFace="#{item.typeName}"> <rich:treeNode type="Category" icon="..." iconLeaf="..."> <h:outputText value="#{item.title}"/> </rich:treeNode> <rich:treeNode type="Course" icon="..." iconLeaf="..." rendered="#{item.courseActive or categoryTreeEditorModel.showAllCoursesInTree}"> <h:outputText rendered="#{item.courseActive}" value="#{item.title}"/> <h:outputText rendered="#{not item.courseActive}" value="#{item.title}" style="color:#{a4jSkin.inactiveTextColor}"/> </rich:treeNode> </rich:tree> the only problem is if some node is not listed in any rich:treeNode it just still shown with title obtained by Object.toString() method insted of being hidden. Does anybody know how to not show some nodes in the Richfases tree according to some condition?

  Read the article

< Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >