Search Results

Search found 11553 results on 463 pages for 'disk utility'.

Page 326/463 | < Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >

• Dell Dimension running Fedora12 does a "Sleeping Beauty" and I am not a "handsome prince"!

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• Microsoft Basic Office 2007 Activation Keys won't work after re-installing on my Laptop

  - by Rolnik

  So, I've upgraded my hard-drive on my laptop, and proceeded to grab my trusty copper-faced Official MS Office disk to do an install. I have three licenses with the fancy green-blue paper that identifies the license keys. Problem is, that for each of these license keys, when the Office 2007 software asks that I enter the "Product Key" it states: The key is incorrect. Verify that you have the correct key, and then retype it Why would Microsoft want to inhibit/prohibit re-installs on the same machine that the software was initially installed to? Incidentally, the same goofy error happens with each of the three valid product key (activation keys) that I enter.

  Read the article

• Making GRUB see software RAID 0 under Ubuntu 10.10 LiveCD

  - by unknownthreat

  I just installed Windows 7 recently, and I expect that it would alter GRUB and it did. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. (Software RAID 0) I've tried running: sudo grub > root (hd0,0) GRUB complains it couldn't find my hard disk. So I tried: find (hd0,0) And it complains that it couldn't find anything. So I tried: find /boot/grub/stage1 It said "file not found". So what now? How can we make GRUB see RAID 0 under Ubuntu 10.10 LiveCD?

  Read the article

• iSCSI: LUNs per target?

  - by badnews

  My question relates specifically to ZFS/COMSTAR but I assume is generally applicable to any iSCSI system: Should one prefer to create a target for every LUN that you want to expose? Or is it good practise to have a single target with multiple LUNs? Does either approach have a performance impact? And is there some crossover point where the other approach makes sense? The use case is for VM disks, where each disk (zvol) is a LUN. So far we have created a a separate target for each VM; but a single target that contains all the LUNs would probably greatly simplify management... but we may need hundreds of LUNs per a single target. (And then possibly tens of initiator connections to that target)

  Read the article

• Logging with Resource Monitor?

  - by Jay White

  I am having sudden spikes in disk read activity, which can tie up my system for a few seconds at a time. I would like to figure out the cause of this before I set my machine to go live. With Performance Monitor I know I can log activity, but this does not show me individual processes that cause a spike. Resource Monitor allows me to see processes, but I have no way to keep logs. It seems unless I have Resource Monitor open at the time of a spike, I will not be able to identify the process causing the spike. Can someone suggest a way to log with Resource Monitor, or an alternative tool that can?

  Read the article

• Can't run Ubuntu from disc

  - by alex

  When I place the boot CD in my CD drive and boot from it, I get the Ubuntu menu. I have these options Try Ubuntu without any change to your computer Install Ubuntu Check disc for defects Test memory Boot from first hard disk I can use the cursor keys to select them, and I can push F1 for help etc. However, I can not select an option. I've highlighted the first and tried enter, space bar etc. I do have a KVM, so I plugged in a 2nd USB keyboard and tried it but no go either. I can push escape and then got to the prompt. Am I doing something wrong?

  Read the article

• Method for imaging a HDD? [closed]

  - by Sonny Ordell

  Possible Duplicate: Imaging new hard drive in Windows 7 laptop? I have to image my 320gb Laptop HDD before I send it in for repairs. The HDD is likely going to get replaced, and I would ideally like to be able to restore everything as I have it now without having to reinstall my OSes, programs and place all my files back again. I can make space on an external HDD I have, so am just looking for how I should go about this. Should I just use dd with a linux rescue cd? Or is there perhaps a more suitable program with its own rescue disk?

  Read the article

• Restoring Box Sync (box.com) using physical media after OS reinstall

  - by sjrm

  I have my Box Folder on a different drive ( D: ) than my Operating System Drive ( C: ) I follow these instructions to set the local folder on the second drive. https://support.box.com/hc/en-us/articles/200852947-How-Can-I-Change-the-Default-Folder-Location-for-Box-Sync- I had to format and reinstall Windows 7, leaving the other drive (D: ) untouched. now i reinstalled Box Sync, and directed it to the same location where i already have all my files. However, Box Sync renamed the folder to (Box ([email protected]) ) as a bckup, and is downloading everything again. As i have like 30Gb of files, and it takes many hour to download them, i just want to use the files that i already have in my local disk. i tried copying all files again to the new local Box Folder, but files started to get duplicated. Is there any way to avoid downloading everything again each time i reinstall my OS ? Thanks

  Read the article

• Installing win xp media center 2005

  - by wdizz

  I have a Dell 710 XPS H2C running Vista Business, I wish to clean install Win XP media center 2005. I wiped my hard drive with Wipe Drive Pro and proceeded to install Win XP, the install starts and goes thru the various prompts but when it comes to 'installing windows' I get a blue screen that flashes briefly (to fast to get the error code) and then reboots. This happens with any XP system disk (iv'e tried 4), but it installs Vista, 7 or Linux with no problems. I contacted Dell Support who have yet to give me any solutions to resolve the problem. Is there anyone out there with any ideas please.

  Read the article

• VMware Workstation on Linux: Dropping core files in a shared folder...

  - by kclittle

  I'm using VMware 6.0.2 on a RHEL 4.6 host. The VMs are MontaVista CGE 5.0 (2.6.21 kernel). I'm trying to get applications running in the VMs to drop any core files on a HGFS volume, i.e. in a "shared folder". The core files get created as per the path and format given in /proc/sys/kernel/core_pattern, but they are always zero length. If I change the path to a local path (on a virtual disk in the VM), all is well. Any ideas what I have to do get the core files written into a shared folder? Thanks for your help!

  Read the article

• What parameters to mdadm, to re-create md device with payload starting at 0x22000 position on backing storage?

  - by Adam Ryczkowski

  I try to recover from mdadm raid disaster, which happened when moving from ubuntu server 10.04 to 12.04. I know the correct order of devices from dmesg log, but given this information, I still cannot access the data. The superblocks look messy; the mdadm --examine for each disk is on this question on askubuntu By inspecting the raw contents of backing storage, I found the beginning of my data (the LUKS container in my case) at position 0x22000 relative to the beginning of the first partition in the raid. Question: What is the combination of options issued to "mdadm --create" to re-create mdadm that starts with the given offset? Bitmap size? PS. The relevant information from syslog when the system was healthy are pasted here.

  Read the article

• How to netboot ubuntu running iniside VirtualBox on Mac Air

  - by murungu

  Having configured a virtual machine for Ubuntu on VirtualBox on my mac air I need to install Ubuntu OS itself. I have selected the hardrive as the primary boot device and the network as the secondary boot device, so I am not prompted to install an Ubuntu disk at boot time. It attempts to netboot but is unable to locate Ubuntu and cannot find anywhere in the configuration where I can explicitly specify where to find and Ubuntu image, so assume it reverts to some default location and fails. Has anybody out there ever successfully installed ubuntu on virtual box on their Mac Air? What steos did you take to get it right?

  Read the article

• Removing vg and lv after physical drive has been removed

  - by Rene

  We had a disk fail and replace but forgot to vgreduce first. The drive was on it's own VG and with two empty LV's and these are now causing LVM to complain every time any command is run, i.e. # lvscan /dev/vg04/swap: read failed after 0 of 4096 at 4294901760: Input/output error /dev/vg04/swap: read failed after 0 of 4096 at 4294959104: Input/output error /dev/vg04/swap: read failed after 0 of 4096 at 0: Input/output error /dev/vg04/swap: read failed after 0 of 4096 at 4096: Input/output error /dev/vg04/vz: read failed after 0 of 4096 at 995903864832: Input/output error /dev/vg04/vz: read failed after 0 of 4096 at 995903922176: Input/output error /dev/vg04/vz: read failed after 0 of 4096 at 0: Input/output error /dev/vg04/vz: read failed after 0 of 4096 at 4096: Input/output error The two LV's are not important, I just want to stop this error from displaying.

  Read the article

• Windows Server 2003 not automatically assigning drive letter to external drives

  - by Chris

  My newly rebuilt Windows Server 2003 doesn't automatically assign drive letters to external usb devices. I have to manually open the Disk Management Console and assign it a drive letter every time. It does this with two different drives in all USB ports. I have been doing some reading and I don't have any network drives, I have also already tried USBDLM and it doesn't seem to have made any difference. Specs: ProLiant ML150 G5 with Windows 2003 Enterprise and all updates installed. Any ideas on what I can try to resolve this problem would be greatly appreciated. Chris

  Read the article

• Recovering a Windows XP License key

  - by Fortyrunner

  I threw out a Windows XP machine a while ago (the motherboard failed). I kept the hard drive and the XP installation media. Problem is the license key was on a sticker on the machine - doh! The original manufacturer has gone bust (Evesham) and I suspect that Microsoft will be of little help. Is there any easy way to get the license key off the hard disk? Can I just find the file with the registry data in it and get the key using a hex editor? I really need a spare XP key for use in a Windows VM.

  Read the article

• How can I restore VM on a new Hyper-V server?

  - by jaloplo

  Hi all, I was working gladly with my VM on my local Hyper-V server. But, after installing some updates on the host the system only show the famous blue screen. I couldn't start my host so I reinstalled it and configured as new Hyper-V server. My VM was in a another disk to prevent this happening but I don't know how to add it as a new VM on new server. In addition, this VM has various snapshots so, how can I add this VM to my new Hyper-V server? UPDATE: I can't do Export/Import because my server crashed before I can't do it.

  Read the article

• Copying windows 8 Users folder having long long paths

  - by bilal.haider

  I was trying to move my "Users" folder in Windows 8 as described here and here. But when I try to copy the folder using "xcopy" in Windows Installation Disk Repair Mode, after some files are copied, I get "insufficient memory". The files on which the error is given are like C:\Users\Bilal\Application Data\Application Data\Application Data.........Application Data\Application Data..... What is the point in such directories within directories? I also tried copying them using Mini Windows XP, but the problem was there too.. Also tried copying using Parted Magic Live CD... but still.. So now, how can I move them? Another Question. Is moving such/ system files using Linux a good idea? Does it do anything to permissions?

  Read the article

• Root partition full? CentOS

  - by Joao Heleno

  Hi! I'm running CentOS 5.4 and my / is full. I wanted to install gparted but in order to do that I must install Priorities and it's when I get an error saying / is full so I can't go forward. Here's some output: fdisk -l Disk /dev/sda: 250.0 GB, 250000000000 bytes 255 heads, 63 sectors/track, 30394 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 83 Linux /dev/sda2 2612 3251 5140800 82 Linux swap / Solaris /dev/sda3 3252 30394 218026147+ 83 Linux df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 20315812 19365152 0 100% / /dev/sda3 211196248 49228164 151066780 25% /home tmpfs 1552844 0 1552844 0% /dev/shm I'm not using LVM. Please advise. Thanks

  Read the article

• SQL Server Transaction Log RAID

  - by Eric Maibach

  We have three SQL Server servers, and each server has a about five or six databases on it. We are in the process of moving these servers to a new SAN and I am working on the best RAID configuration. Currently all of the log files for all of the databases share a RAID array, there is nothing else on this RAID array except for the log files, but all of the databases use this same array for their log files. I have read that it is best to have log files on separate disks. But in our case I am not sure whether it would be best to have one big array with about 8 drives that all the log files are on. Or would it be better to create four two disk arrays and give some of the larger databases their own dedicated disks for their log files?

  Read the article

• Can someone correct me about Windows 2008 DFS implementation

  - by cwheeler33

  I have 2 two Windows 2003 file servers using DoubleTake at the moment. They are in an 2003 AD domain. And each server has it's own disk set. It is time to replace the servers... I want to use Windows 2008 64bit Ent. I was thinking of using DFS-R to replace DoubleTake. The part I'm not sure about is clustering. Do I need to have shared storage if each server has a copy of the data? I want to have the data available to the same share name, so maybe I don't fully understand how DFS is set up. I currently have about 6TB of data. I expect to grow by 3TB a year on these file servers. Any resources/books that could teach me would be good to know as well.

  Read the article

• Jungledisk - choosing between Amazon S3 and Rackspace ?

  - by Dietmar

  Hi, jungledisk is owned by rackspace and offers an option to choose Amazon S3 which charges for traffic whereby if data is stored on rackspace, no charges for traffic. For a small company, to just backup files with jungle disk from ubuntu linux OS computers, i wonder what to choose. Commercial psychologically the price on traffic and the Amazon brand make it appear or maybe it is, of better quality than the cheaper Rackspace offer which is when it comes for just backing up ok ? but if its about backing up around 30 GB which updates from time to time, what would you consider a good choice ?

  Read the article

• Restoring Mac-bootcamp-windows-partition image to Windows machine

  - by jpwagner

  Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

  Read the article

• Restoring Mac-bootcamp-windows-partition image to Windows machine

  - by jpwagner

  Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

  Read the article

• My computer resets when i try to install Windows 7 (USB/DVD)

  - by Ranhiru

  I had a troublesome software starting up when Windows 7 was starting and i had no way to remove it because i couldn't log in to Windows. Not even safe mode. But i used Hiren's Boot CD to edit the registry to stop that software from starting up... But my efforts were not useful as Windows kept on going to an ultimate freeze just before the login screen should have been shown. And just freezes and I cannot do anything. So i decided heck with it and i now want to format the disk and reinstall a fresh copy of Windows 7. But now regardless of USB or DVD i use to boot the setup, it loads fine till you see the animating Windows and it just resets the laptop! Just plain resets! Hiren's Boot CD and Mini XP, strange enough but still works :( Any ideas what might be causing the laptop to reset in Windows 7 setup?

  Read the article

• Issues with non-HP harddisk in HP ML 350 server?

  - by Torben Warberg Rohde

  I'm looking to buy some extra disk space for a HP ML 350 G5 server. It is for simple file-serving - not OS/system stuff. HP harddisks are insanely expensive, so I'm tempted to buy some other brand instead. I have heard that they sometime use special firmware on their disks, but I suspect that might just be HP spreading rumors to sell disks. Does anyone have experience using non-HP disks? Any features not working, or not being able to build the RAID at all? I'm looking at 2.5" SAS Seagate drives - Constellation 500 GB (7.2k) or Savvio 600 GB (10k).

  Read the article

< Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >